Use This Pair To Cover The Mounting Screws And Screw Holes On Your Fusion Apollo MS-RA670, MS-RA210 or MS-RA60 Marine Stereos Compatible Devices: Fusion Apollo MS-RA670 Stereo Fusion MS-RA210 Marine Stereo Fusion MS-RA60 Marine Stereo Fusion Stereo & Speaker Kits Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Switch Up The Look Of Your Fusion Xs Series Marine Speakers And Subwoofers With An Accessory Grille These grilles are quick and easy to install. Simply remove your existing grille by twisting it off, fit the new grille in place, twist to tighten and you’re good to go. Like your existing XS Series, these grilles are durable and built to last in the harsh marine environment. Compatible Devices: Fusion Stereo & Speaker Kits Fusion XS Series Marine Speakers Fusion XS Series Marine Wake Tower Speakers Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

7.7" 280 Watt Coaxial Sports White Marine Speaker With LEDs Pushing the boundaries of what is possible on the water, FUSION's Signature Series marine speakers are designed to provide unparalleled performance even when exposed to the harshest marine conditions. Combining ‚ÄòCURV' Cone composite technology with a Silk Dome tweeter and fully sealed crossover components, the Sports Ice White Signature 7.7‚Äù Speaker system is a stylish solution for premium on-water listening. The Sports style Signature Series speakers feature dual-color diffused LED lighting options that illuminate Striking Blue or Sparkling White, to either set the mood or start the party. These 7.7" Signature Series speakers can handle up to a thunderous 280 Watt peak power. Features: CURV Cone Technology - Incorporating CURV woven fiber composite, which is heat pressed, to form a lighter and stronger cone that delivers greater sound definition and higher output, for greater resistance to the marine environment. Fully Sealed Crossover Components – Providing full protection from the harsh marine environment, whilst delivering improved frequency response at the crossover point for a detailed spectrum of audio and new level of acoustic performance. Sports Styled Grille – A structurally ridged True-Marine™ design for the ultimate cone protection, that delivers great looks to complement any vessel. Engineered for internal or external installation. Silk Dome Tweeter - Creating a smooth upper frequency response and increased efficiency, which delivers crisp sound for unrivalled enjoyment. Large Diameter Voice Coil – Delivering an increase in real power and efficiency, the voice coil provides a signature sound exclusive to the 7.7‚Äù FUSION Speakers. Dual-Color diffused LED Lighting option* - Select either a Striking Blue or Sparkling White LED illumination for your speaker cone to add instant appeal that will energize your boating experience. *Color determined on wiring polarity at installation. Specifications: Product Code SG-FL77SPW Configuration Coaxial RMS Power Rating (Watts) 100 Peak Power (Watts) 280 Efficiency (1w/1m) 91db Frequency Response 60hz-22khz Impedance 4 Ohms Tweeter Type Silk Dome Cone Material Curv Voice Coil Diameter 1.5‚Äù Led Color Options White And Blue Mounting Diameter Clearance 156mm (6-1/8") Mounting Depth Clearance 85.5mm (3-3/8") Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

A Fantastic Heavy-Duty Aluminium Rod Holder!Cast Aluminium Rod HolderSpecifications:High-quality cast aluminium rod holder ideal for use on aluminum and fibreglass boats. Can be side-mounted or rail-mounted with 360-degree rotation. Specifications: Supplied With:Rod HolderSide Mount FittingRail Mount Fitting4x Stainless Steel Nuts, Bolts & WashersLocking Pin Packaging: XXX Marine Blister & Card Weight: 0.90kg Legendary Product & Support From Authorised Dealers You've decided to buy XXX Marine. That means quality and performance are important to you, so who you buy your new XXX Marine gear from is just as important. Here are a few reasons to purchase from an authorized dealer and here is why.Proper Training: Only authorized XXX Marine dealers are factory trained to sell and install our products. They know our products and your vehicle to ensure that your new purchase exceeds your expectations!Authorized Warranty: XXX Marine provides one of the best warranties in the business. Only customers purchasing through authorized dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.Support: If you have an issue, you are covered by XXX Marine Australia’s manufacturer's warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It's all done right here.Protect Your Investment: Protect yourself and your investment by making sure you buy your XXX Marine product from us, an online dealer who is part of the XXX Marine family. Ask yourself, is it worth saving a few dollars to not be covered?! Legendary Products & Support From Authorized Dealers When you choose XXX Marine, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized XXX Marine dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by XXX Marine's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized XXX Marine dealer today!

Read more less

GME GR350BTW Super Compact Bluetooth AM/FM Marine Stereo White 4x40W 2.7 Inch TFT LCD IPX5 Gauge Hole Installation The GME GR350BTW is GME's most compact Bluetooth AM/FM marine entertainment stereo in white. Sized to fit standard gauge holes for quick retrofit installation without additional panel cutting. Bluetooth audio streaming, built-in AM/FM tuner, USB and AUX inputs, 4x40W speaker outputs, and a 2.7 inch full colour backlit TFT LCD display. IPX5 rated for water spray and splash protection in the marine environment. Black version available as GR350BTB. Product overview Many older vessels have round gauge holes in the helm panel left empty after analogue speedometers, tachometers, or depth sounder gauges are removed during upgrades to digital display systems. The GR350BTW is sized specifically to fit these standard gauge holes, allowing installation in existing openings without cutting new panels or modifying the helm layout. This makes it a practical and low-disruption retrofit for vessels where a full-size marine stereo cannot be accommodated or where a clean installation is preferred. Bluetooth audio streaming pairs wirelessly with smartphones and tablets for music playback anywhere on the vessel. The built-in AM/FM tuner, USB input, and AUX input cover all standard audio sources. Four 40W speaker outputs provide stereo sound across the vessel's speaker system. The 2.7 inch TFT LCD display with backlight remains readable in direct sunlight. IPX5 protection covers water jets and spray from any direction, appropriate for protected helm positions on recreational vessels. For installation positions with heavy water exposure or potential flooding, confirm suitability of IPX5 with the vessel's layout. Features and benefits Super compact gauge hole design: Sized to fit standard gauge holes in the helm panel for retrofit installation without additional panel cutting. Bluetooth wireless audio streaming: Pairs with smartphones and tablets for wireless music playback from anywhere on the vessel. 4x40W speaker outputs: 160W total output across four channels for clear stereo sound. 2.7 inch full colour TFT LCD display: Backlit for readability in direct sunlight. Built-in AM/FM tuner: Receives standard AM and FM broadcast radio. USB and AUX inputs: Connects USB drives and auxiliary audio sources. IPX5 ingress protection: Protected against water jets and spray from any direction, suitable for protected marine helm positions. White finish: Suits white vessel helm panels. Black version available as GR350BTB. Technical specs Specification Detail SKU GR350BTW Brand GME Type Marine AM/FM Bluetooth Stereo Colour White Display 2.7 inch TFT LCD, full colour, backlit Speaker Outputs 4x40W Audio Sources Bluetooth, AM/FM tuner, USB, AUX IP Rating IPX5 Installation Gauge hole mount, super compact Black Version GR350BTB Frequently asked questions What is the gauge hole installation and why is it useful? Many older vessels have round holes in the helm panel left vacant after analogue gauges are removed during digital display upgrades. The GR350BTW is sized to fit these standard gauge holes, allowing it to be installed cleanly in existing openings without additional panel cutting or helm modification. This makes it a low-disruption retrofit for vessels where the gauge hole is available. What does IPX5 mean for a marine stereo? IPX5 means the unit is protected against water jets from any direction, covering spray, splash, rain, and wave action at the helm. It is appropriate for protected helm positions on recreational vessels. IPX5 is not a submersion rating. For helm positions with heavy water exposure or potential flooding, confirm suitability for the specific installation location. What Bluetooth devices can the GR350BTW pair with? The GR350BTW pairs with any Bluetooth-enabled smartphone or tablet using the standard A2DP Bluetooth audio streaming profile, covering the large majority of modern iOS and Android devices. Contact us if compatibility with a specific older device needs to be confirmed. What inputs and outputs does this stereo provide? Audio inputs cover Bluetooth streaming, built-in AM/FM tuner, USB drive input, and a 3.5mm AUX input. Audio outputs are 4x40W speaker outputs for connection to external marine speakers. Contact us to confirm speaker impedance requirements before purchasing. Is there a black version of this stereo? Yes. The GR350BTB is the black version with the same specifications. Select white or black based on the vessel's helm panel colour and aesthetic preference. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Introducing the FUSION Sound-Panel, A Revolutionary Speaker System Made for Boating Enthusiasts and the Diverse Needs of Different Vessels The Sound-Panel solves the age-old problem of achieving professional-quality audio from the limitations of shallow mounting depths often required in many installations. The Sound-Panel boasts two soft dome tweeters, two custom 4" speaker drivers, and a bass radiator, all perfectly tuned to the Sound-Panel enclosure. Together this brings 200 Watts of powerful, high-quality audio to your vehicle. Features: IP65 Weatherproof - The Sound-Panel is rated IP65 for protection in the harsh outdoor environment from the front and rear of the enclosure, making it perfect for installation both on the outside or inside of your campervan or RV. Different Mounting Options Available - Optional mounting spacer accessories are available to suit the variable mounting depths available on each vehicle. There are four mounting options available: Flush – With only a 41mm required depth the RV-FS402W will fit flush in most locations. 19mm Wall Depths – The RV-FS402W can be semi mounted into the cavity by using the 22mm spacer, thanks to new technology available in construction. 25mm Wall Depths – By using the 16mm spacer the RV-FS402W can be semi mounted into normal construction panels. Surface Mount – The RV-FS402W can be installed directly onto any flat surface with no cut-out required. Quick and Simple Installation – The RV-FS402W is designed for easy installation through requiring only a single cut-out. Both the left and right speaker wires from the source unit or amplifier only need to be routed to one location for connection, making this speaker system relatively quick and simple to install. Stainless Hardware – Stainless steel mounting hardware is included with the RV-FS402W to limit corrosion and tea staining, so it can keep looking great season after season. Tuned, Sealed Enclosure with a Passive Radiator - The RV-FS402W is an all-inclusive solution. The sealed design protects all drivers and components from damage in any mounting location. Professional Sound Quality Meets Quick and Simple Installation The Sound-Panel solves the age-old problem of delivering professional sound quality from the limitations of shallow mounting depths often required in many installations. Designed for easy installation, both the left and right speaker wires from the source unit or amplifier only need to be wired to one location for connection, saving time and money. Versatile Mounting Solutions The Sound-Panel has four mounting options available to create a professional indoor or outdoor installation. Surface Mounting - RV-FS41SPW - By using the 41mm (1-5/8") spacer the Sound-Panel will surface mount onto any flat surface with no cut out required 3/4" Mounting Depth - RV-FS22SPW - By using the 22mm (7/8") spacer the Sound-Panel will recess into any 19mm (3/4") composite wall 1" Mounting Depth - RV-FS16SPW - By using the 16mm (5/8") spacer the Sound-Panel will recess into the 25mm (1") standard RV or vessel construction panels 1 5/8" Mounting Depth - With only a 41mm (1-5/8") required depth the Sound-Panel will fit flush in most locations, no spacer required Specifications: Tweeter Type: Soft dome tweeter Peak Power: 100 W (per speaker connection) RMS Power: 25 W (per speaker connection) Efficiency (1W/1M): 87dB Mounting Depth Clearance: 41 mm (1-5/8”) Mounting Dimension Clearance: 431 mm (17”) x 171 mm (6-3/4”) Impedance: 4 Ohms Frequency Response: 67Hz - 20kHz Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Available in Black or White to Match the Colour of Your SM Series Speaker for A Seamless Installation SM Series Surface Mount SpacerThe SM Series has three optional accessory mounting spacers to support installations in various positions for a professional installation. The SM-X65SPB is designed for surface mounting the SM Series speaker onto a flat surface, ideal for when mounting depth is limited. Features: SM Speaker Series Single Surface Corner Spacers Pair Made from High-Quality, Light-Weight Materials Easy to Carry, Assemble, or Pack Sturdy & Durable Construction Specifications: Type: Surface Mount Spacer Colour: Black Weight: 0.55 Lbs. Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Stinger SMRCA6 Marine and PowerSports RCA Interconnect Cable 6 Metre with Tinned OFC Conductors and Nickel-Plated Brass Connectors The SMRCA6 from Stinger is a marine and PowerSports RCA interconnect cable measuring 6 metres in length. Built with tinned OFC copper conductors with polyethylene dielectrics, a high-rate twisted-pair configuration, a flexible PVC outer jacket, and moulded connectors with machined nickel-plated brass contacts, it is designed to deliver reliable signal transfer with maximum corrosion resistance in harsh marine and PowerSports environments. Product overview Standard RCA cables are not built to withstand the moisture, salt, and corrosion exposure encountered in marine and PowerSports audio installations. The SMRCA6 addresses this with tinned OFC copper conductors that resist corrosion at the conductor level, combined with polyethylene dielectrics that provide stable electrical insulation across the full cable length. The result is an RCA cable where corrosion at the conductor is effectively eliminated, maintaining signal integrity over the long term in conditions that would degrade standard automotive RCA cables. The high-rate twisted-pair construction provides strong noise rejection across the 6 metre cable run, and the flexible PVC outer jacket allows easy routing through tight spaces in vessels and PowerSports vehicles. The moulded connectors use machined nickel-plated brass contacts for superior connection integrity and corrosion resistance at each RCA socket interface. Features and benefits Tinned OFC copper conductors with polyethylene dielectrics: Tinned conductors resist corrosion in wet and salt-exposed environments, while polyethylene dielectrics provide stable electrical insulation across the full cable length, eliminating the conductor corrosion that affects standard RCA cables in marine applications. High-rate twisted-pair construction: The twisted-pair configuration provides strong noise rejection across the full 6 metre cable run, maintaining clean signal transfer in environments where electromagnetic interference from marine electronics and PowerSports components is a concern. Moulded connectors with machined nickel-plated brass contacts: The machined nickel-plated brass contacts provide superior connection integrity and corrosion resistance at each RCA interface, maintaining reliable signal transfer across the connector in harsh marine environments. Flexible PVC outer jacket: The flexible PVC jacket allows easy routing through tight spaces in vessel hulls and PowerSports vehicles without stiffness or kinking during installation. 6 metre length: The 6 metre cable length provides sufficient run for larger vessel installations or PowerSports applications where the amplifier is located a significant distance from the head unit or signal source. Technical specs Specification Detail SKU SMRCA6 Brand Stinger Cable Length 6 Metres Conductor Type Tinned OFC copper with polyethylene dielectrics Construction High-rate twisted-pair Connector Type Moulded, machined nickel-plated brass contacts Outer Jacket Flexible PVC Frequently asked questions What makes the SMRCA6 different from a standard automotive RCA cable?The SMRCA6 uses tinned OFC copper conductors with polyethylene dielectrics, which resist corrosion in wet and salt-exposed environments where standard RCA cables degrade over time. The machined nickel-plated brass contacts also provide superior corrosion resistance at the connector interface compared to standard plated contacts used in automotive RCA cables. Is the SMRCA6 suitable for both freshwater and saltwater marine installations?Yes. The tinned conductors and nickel-plated brass contacts are designed to resist moisture, salt, and corrosion exposure, making the SMRCA6 suited to both freshwater and saltwater marine audio installations. Can the SMRCA6 be used in PowerSports applications such as ATVs and motorcycles?Yes. The SMRCA6 is designed for both marine and PowerSports applications where exposure to moisture, vibration, and harsh environmental conditions requires a more robust RCA cable than standard automotive options provide. How many channels does the SMRCA6 carry?The channel count for the SMRCA6 has not been confirmed in the available source data. Contact us before ordering to confirm the channel configuration of this cable for your specific installation. Is the SMRCA6 available in other lengths?Contact us to confirm the full range of Stinger marine and PowerSports RCA cable options available in other lengths to suit your specific installation requirements. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Uniden ATM301 VHF 1.8m Antenna Fold-Down Base Maintain reliable marine communication with professional ground-independent VHF antenna featuring convenient fold-down design, UV-stabilized construction, and complete installation hardware for superior performance on the water. Product Overview The Uniden ATM301 is a professional-grade 1.8-meter VHF marine antenna engineered for reliable communication on boats, yachts, and marine vessels requiring dependable radio connectivity for safety, navigation, and communication. This ground-independent antenna design eliminates the need for ground plane requirements, simplifying installation and ensuring consistent performance across various mounting locations and vessel types without compromising signal strength or reception quality. The innovative fold-down whip mount enables convenient stowage during trailering, low bridge passages, or storage, protecting the antenna from damage while reducing overall vessel height for transportation and secure marina storage. Constructed from premium UV-stabilized materials engineered specifically for harsh marine environments, the ATM301 resists degradation from constant sun exposure, salt spray, and extreme weather conditions that rapidly deteriorate inferior antennas, ensuring superior operational life and maintaining performance through years of service. The complete installation package includes 5-meter cable providing flexible routing options from antenna to radio, FME plug for easy initial connection, and PL259 adaptor for final professional connection to marine VHF radios using standard connectors. Whether you're equipping a fishing boat, sailing yacht, powerboat, or commercial vessel, the ATM301 delivers the reliable VHF communication essential for maritime safety, weather monitoring, and vessel-to-vessel communication. Features & Benefits Ground Independent Design: Eliminates ground plane requirements enabling installation on fiberglass vessels, aluminum boats, or any mounting location without needing extensive grounding systems or metal surfaces for proper operation, simplifying installation while maintaining excellent signal transmission and reception performance that rivals or exceeds ground-dependent antennas requiring complex grounding installation. Convenient Fold-Down Capability: Innovative fold-down whip mount allows quick antenna lowering for trailering, passing under low bridges, marina storage, or protecting antenna during rough weather or storage periods, preventing damage from overhanging obstacles and reducing vessel height for transportation while enabling rapid deployment when communication is needed without tools or complicated mechanisms. UV-Stabilized Marine Construction: Premium UV-stabilized materials resist degradation, fading, cracking, and structural weakening from constant solar exposure, salt spray, and harsh marine environmental conditions that quickly destroy standard antennas, ensuring the ATM301 maintains structural integrity, appearance, and electrical performance through years of exposure to brutal marine conditions including tropical sun, saltwater corrosion, and temperature extremes. Optimal 1.8 Meter Length: Professional 1.8-meter antenna height provides excellent balance between transmission range, reception sensitivity, and practical vessel mounting requirements, delivering superior communication distance compared to shorter antennas while remaining manageable for most vessel sizes without excessive height creating clearance issues or requiring specialized mounting solutions for tall antennas. Complete Installation Hardware: Includes comprehensive installation components featuring 5-meter cable for flexible routing from mounting location to radio installation, FME plug enabling easy initial connection, and PL259 adaptor providing standard connector compatibility with marine VHF radios using industry-standard PL259 inputs, eliminating the need to source separate cables, adapters, or connectors for complete installation. Versatile Mounting Application: Fold-down base accommodates various vessel mounting requirements including rail mounting, deck mounting, cabin top installation, or arch mounting on different vessel types from small fishing boats to large yachts, providing installation flexibility that adapts to specific vessel design, optimal signal propagation requirements, and owner preferences for antenna placement aesthetics. Superior Operational Longevity: Professional marine-grade construction ensures extended service life compared to economy antennas that require frequent replacement due to environmental degradation, connection failures, or structural damage, providing better long-term value through years of reliable operation without performance deterioration or the expense and inconvenience of premature antenna replacement. Technical Specifications Category Specification Brand Uniden Model ATM301 Product Type VHF Marine Antenna Antenna Length 1.8 Metres Frequency Range VHF Marine Band Ground Plane Ground Independent (No Ground Plane Required) Mount Type Fold-Down Whip Mount Construction Material UV Stabilized Materials Cable Length 5 Metres Included Cable Connector FME Plug Radio Connector PL259 Adaptor Included Application Marine Vessels, Boats, Yachts Environmental Protection UV Stabilized for Marine Conditions Deployment Fold-Down for Storage/Transport Installation Type Rail, Deck, Cabin Top, Arch Mount Included Components Antenna, Fold-Down Base, 5m Cable, FME Plug, PL259 Adaptor Compatible With The Uniden ATM301 VHF marine antenna is designed for universal application across all marine VHF radios and vessels requiring reliable VHF communication capability. Compatible with marine VHF radios from all major manufacturers including Uniden, Icom, Standard Horizon, Raymarine, Garmin, Cobra, and others using standard PL259 (UHF) connector input – the included PL259 adaptor ensures proper connection to industry-standard radio equipment. Suitable for diverse vessel types including fishing boats, sailing yachts, powerboats, cruisers, trawlers, commercial vessels, workboats, and recreational watercraft operating in freshwater lakes, rivers, coastal waters, and offshore environments. The ground-independent design enables installation on fiberglass boats, aluminum vessels, inflatable boats, and any vessel construction without requiring metal ground plane or complex grounding systems that complicate installation on modern composite vessels. The fold-down mount accommodates various mounting locations including stainless steel rails (with appropriate rail mount hardware), deck surfaces, cabin tops, radar arches, T-tops, and hardtops on vessels ranging from small tenders to large yachts. The 5-meter cable provides adequate length for typical installations from stern rail, arch, or cabin top mounting locations to radio installations at helm or navigation stations – longer cable runs may require extension or direct cable replacement for very large vessels or unusual mounting configurations. The VHF marine band operation ensures compatibility with maritime communication standards including DSC (Digital Selective Calling), weather monitoring, coastguard communication, vessel-to-vessel hailing, marina communication, and emergency distress calling. Not suitable for non-marine VHF applications such as land-mobile radio, aviation, or amateur radio requiring different frequency ranges. The fold-down capability makes this antenna particularly suitable for trailerable boats requiring antenna lowering for transport, vessels operating in areas with low bridges or overhead obstacles, or boats stored in covered marina slips with limited vertical clearance. Professional marine installation recommended to ensure proper mounting location for optimal signal propagation, secure mechanical installation resisting wind and vibration forces, weatherproof cable connections preventing corrosion, and compliance with navigation light clearance requirements if mounted near vessel lighting. Frequently Asked Questions Q: What does "ground independent" mean for this antenna?A: Ground independent means the ATM301 doesn't require a ground plane (large metal surface) to operate properly. This is crucial for modern fiberglass boats and simplifies installation compared to antennas requiring grounding systems. You can mount it virtually anywhere on your vessel without worrying about grounding requirements. Q: How do I fold down the antenna for trailering?A: The ATM301 features a fold-down whip mount that allows you to lower the antenna quickly without tools. Simply release the mounting mechanism and fold the antenna down for transport, then raise it back up when you're ready to use your vessel. This protects the antenna during trailering and reduces overall height. Q: Will this antenna work with my existing marine VHF radio?A: Yes, the ATM301 is compatible with all marine VHF radios using standard PL259 connectors. The included PL259 adaptor ensures proper connection to your radio. The 5-meter cable provides flexible routing from your chosen mounting location to the radio installation at your helm or navigation station. Q: How long will this antenna last in harsh marine conditions?A: The ATM301 is constructed from UV-stabilized materials specifically engineered for marine environments. This construction resists degradation from constant sun exposure, salt spray, and harsh weather conditions. With proper installation and care, you can expect years of reliable service without performance deterioration or structural failure. Q: What is the best mounting location for optimal performance?A: For best VHF performance, mount the antenna as high as practical with clear line-of-sight in all directions, away from metal obstructions and other antennas. Popular locations include stern rails, radar arches, or cabin tops. The 1.8-meter length provides excellent range while remaining manageable for most vessel sizes and mounting configurations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-13854-00 MMC-2Y 2-Way Y-Adaptor - MediaMaster Source Unit Connection Splitter for Multiple Remote Controllers, Enables Dual Non-NMEA 2000 Remote Controller Connectivity, Compatible with MediaMaster 105 and MediaMaster 55 Stereos, Professional Marine Audio System Expansion Accessory, and Flexible Multi-Location Control Installation Solution Achieve expanded remote control capability for JL Audio MediaMaster marine audio systems using JL Audio MMC-2Y 2-Way Y-Adaptor—featuring professional connection splitting design enabling single MediaMaster source unit to connect simultaneously to two non-NMEA 2000 network remote controllers expanding system control accessibility throughout vessel, compatibility with JL Audio MediaMaster 105 stereo and MediaMaster 55 stereo source units providing verified integration with complete MediaMaster product line, support for MMR-20 BE wired remote controller connections enabling dual MMR-20 BE installations for helm and cockpit control, stern and bow control, flybridge and cabin control, or other multi-location control configurations, eliminates requirement for NMEA 2000 network infrastructure when multiple remote controllers desired simplifying installations on vessels without existing NMEA 2000 backbone, Y-adaptor connection topology splitting single source unit remote control output into two independent remote controller inputs maintaining signal integrity and reliable communication, marine-grade construction withstanding harsh saltwater environments, moisture exposure, and temperature extremes ensuring reliable long-term performance, compact design facilitating installation in confined equipment compartments, behind helm panels, or concealed locations without requiring excessive space, durable connector construction ensuring secure reliable connections preventing intermittent contact from vibration or environmental factors, professional installation accessory enabling custom multi-zone control layouts without complex networking requirements, simplified wiring compared to NMEA 2000 installations reducing installation complexity and cost for dual remote controller configurations, enhanced user convenience providing independent control access from multiple vessel locations without requiring users to access primary helm location, ideal for larger vessels, multi-deck layouts, center console boats with dual helm positions, or any marine application benefiting from multiple remote controller locations, proven JL Audio marine audio engineering delivering reliable connection splitting solution maintaining full functionality of both remote controllers without signal degradation or control conflicts, and professional-grade accessory for recreational boats, fishing vessels, center console boats, pontoon boats, sailing yachts, power cruisers, and marine applications requiring dual MediaMaster remote controller connectivity expanding JL Audio MediaMaster system control accessibility throughout vessel. Product Overview JL Audio MMC-2Y 2-way Y-adaptor for MediaMaster source units enabling connection splitting to multiple non-NMEA 2000 network remote controllers. Professional installation accessory expanding MediaMaster system control capability to dual remote controller locations. Y-adaptor splits single MediaMaster source unit remote control output connection into two independent remote controller inputs. Enables simultaneous connection of two MMR-20 BE wired remote controllers or compatible non-NMEA 2000 remote controllers to single MediaMaster 105 or MediaMaster 55 source unit. Compatible with JL Audio MediaMaster product line: MediaMaster 105 stereo (premium marine source unit), MediaMaster 55 stereo (compact marine source unit), MMR-20 BE wired remote controller (Bluetooth enabled wired remote). Verified compatibility ensures reliable operation with MediaMaster system architecture. Eliminates NMEA 2000 network requirement for dual remote controller installations. Provides direct wired connection alternative simplifying installations on vessels without existing NMEA 2000 backbone. Reduces installation complexity compared to network-based remote controller configurations. Connection topology maintains signal integrity ensuring reliable communication between source unit and both remote controllers. Both remote controllers function independently providing full control capability without conflicts or control priority issues. Typical installation configurations: helm and cockpit remote controllers for independent control from captain's position and entertaining area, flybridge and cabin control for multi-deck vessels, bow and stern control for fishing vessels, port and starboard helm control for dual-helm center console boats. Marine-grade construction withstands harsh saltwater environments, moisture exposure, and temperature extremes. Durable connector design ensures secure connections preventing intermittent contact. Compact dimensions facilitate installation in confined spaces behind helm panels or equipment compartments. Installation simplifies multi-location control: connect Y-adaptor to MediaMaster source unit remote controller output port, connect first remote controller to Y-adaptor output 1, connect second remote controller to Y-adaptor output 2, secure connections and route cables through vessel structure. Professional installation recommended for optimal cable routing and connection security. Enhanced user convenience providing independent control access from multiple vessel locations. Users control MediaMaster system from any remote controller location without accessing primary helm position. Ideal for larger vessels, multi-zone layouts, or applications where single remote controller location insufficient. 2-Way Connection Splitting - Y-adaptor topology splitting single MediaMaster source unit remote control output into two independent remote controller inputs enabling simultaneous dual remote controller connectivity without NMEA 2000 network requirements. MediaMaster Source Unit Compatibility - Compatible with JL Audio MediaMaster 105 stereo and MediaMaster 55 stereo source units providing verified integration with complete MediaMaster product line ensuring reliable system operation. MMR-20 BE Remote Controller Support - Supports connection of MMR-20 BE Bluetooth enabled wired remote controllers enabling dual MMR-20 BE installations for multi-location MediaMaster system control throughout vessel. Non-NMEA 2000 Direct Connection - Eliminates NMEA 2000 network infrastructure requirement for dual remote controller installations providing direct wired connection alternative simplifying installations and reducing complexity. Signal Integrity Maintenance - Connection topology maintains signal integrity ensuring reliable communication between MediaMaster source unit and both remote controllers without signal degradation or control conflicts. Marine-Grade Construction - Durable marine-grade materials and connector construction withstanding harsh saltwater environments, moisture exposure, temperature extremes, and vibration ensuring reliable long-term performance. Compact Installation Design - Compact Y-adaptor dimensions facilitating installation in confined equipment compartments, behind helm panels, or concealed locations without requiring excessive mounting space. Dual Independent Control - Both connected remote controllers function independently providing full MediaMaster system control capability from either location without control priority issues or operational conflicts. Simplified Installation - Straightforward Y-adaptor connection reducing installation complexity compared to NMEA 2000 network configurations making dual remote controller installations accessible without specialized networking knowledge. Multi-Location Control Flexibility - Enables flexible multi-location control configurations including helm/cockpit, flybridge/cabin, bow/stern, or dual-helm installations optimizing MediaMaster system accessibility throughout vessel. Enhanced User Convenience - Provides independent MediaMaster control access from multiple vessel locations eliminating need for users to access primary helm position for system adjustments or source changes. Professional Installation Accessory - JL Audio engineered accessory designed specifically for MediaMaster system expansion ensuring proper specifications, reliable operation, and compatibility with MediaMaster architecture. Technical Specifications Specification Details Model MMC-2Y Part Number JLA-010-13854-00 Brand JL Audio Product Type 2-Way Y-Adaptor / Connection Splitter Function Splits single remote control output to dual remote controller inputs Connections 1 Input (to source unit), 2 Outputs (to remote controllers) Compatible Source Units MediaMaster 105, MediaMaster 55 Compatible Remote Controllers MMR-20 BE, Non-NMEA 2000 remote controllers Network Type Non-NMEA 2000 Direct Wired Connection Construction Marine-Grade Materials Design Compact Y-Adaptor Configuration Application MediaMaster system remote controller expansion Frequently Asked Questions Q: Which JL Audio products is MMC-2Y compatible with? A: MMC-2Y specifically compatible with JL Audio MediaMaster source units and non-NMEA 2000 remote controllers. Compatible source units: MediaMaster 105 stereo (premium marine source unit with comprehensive features), MediaMaster 55 stereo (compact marine source unit). Compatible remote controllers: MMR-20 BE Bluetooth enabled wired remote controller, other JL Audio non-NMEA 2000 wired remote controllers for MediaMaster systems. Verify your specific MediaMaster model and remote controller models before purchase. Not compatible with: NMEA 2000 network remote controllers (use NMEA 2000 backbone for network-based remotes), non-JL Audio marine stereos or remote controllers, MediaMaster systems using exclusive NMEA 2000 control architecture. For NMEA 2000 remote controller installations: connect remotes directly to vessel NMEA 2000 backbone (Y-adaptor not required for network-based remotes). MMC-2Y specifically designed for non-NMEA 2000 direct wired remote controller configurations. If uncertain about compatibility: consult MediaMaster documentation, contact JL Audio support with source unit and remote controller model numbers, or verify with authorized JL Audio marine audio dealer. Q: Can I use MMC-2Y to connect more than two remote controllers? A: MMC-2Y designed for dual remote controller connectivity (one source unit output split to two remote controller inputs). For more than two remote controllers: multiple configuration options exist depending on system architecture. Option 1: Daisy-chaining multiple MMC-2Y adaptors (connect second MMC-2Y to first MMC-2Y output) may enable three or more remotes but not officially supported—functionality not guaranteed, potential signal degradation with excessive splits, consult JL Audio before attempting. Option 2: NMEA 2000 network solution—if MediaMaster source unit supports NMEA 2000 and vessel has NMEA 2000 backbone, use NMEA 2000 compatible remote controllers connected directly to backbone supporting multiple remotes without Y-adaptors, requires NMEA 2000 infrastructure and compatible remote controllers. Option 3: Combination approach—use MMC-2Y for two non-NMEA 2000 remotes plus NMEA 2000 remotes on network if system supports both connection types. Recommended maximum: two remote controllers per MMC-2Y adaptor as designed. For installations requiring three or more remote controllers: consult JL Audio technical support for proper system architecture recommendations, consider NMEA 2000 network solution supporting multiple network remotes, verify MediaMaster source unit capabilities support desired configuration. Q: How do I install MMC-2Y in my MediaMaster system? A: MMC-2Y installation straightforward process: locate MediaMaster source unit remote controller output port (consult MediaMaster documentation for port location—typically labeled "Remote" or similar), connect MMC-2Y input connector to MediaMaster remote controller output port ensuring secure connection, route MMC-2Y output cables to first remote controller location through vessel structure, dash cavities, or equipment compartments, connect first remote controller to MMC-2Y output 1, route second output cable to second remote controller location, connect second remote controller to MMC-2Y output 2, secure all connections ensuring tight fit preventing vibration-induced disconnection, secure cables along routing path preventing chafing or interference with moving parts, mount MMC-2Y in accessible location for future service (behind helm panel, in equipment compartment, or near source unit), test both remote controllers verifying full functionality including source selection, volume control, track navigation, and all features. Installation considerations: plan cable routes before installation measuring distances ensuring adequate cable length, avoid routing cables near high-current power cables preventing interference, use cable ties or clips securing cables preventing movement, protect connections from direct water exposure when possible. Tools required: basic hand tools, cable routing tools, zip ties or cable management hardware. Installation time: typically 30-60 minutes depending on vessel complexity and cable routing requirements. Professional installation recommended if unfamiliar with marine electronics installation or vessel cable routing. Q: Will using MMC-2Y affect remote controller functionality or performance? A: MMC-2Y designed to maintain full remote controller functionality without performance degradation when used within design specifications. Both connected remote controllers retain complete control capability: volume adjustment, source selection, track navigation, settings access, and all MediaMaster features accessible from remote controller. Expected performance: both remote controllers operate independently, no control priority or conflict issues, simultaneous control possible (both remotes adjusting volume simultaneously results in most recent command executed), signal integrity maintained through Y-adaptor connection. Potential considerations: excessive cable lengths from Y-adaptor to remote controllers may cause signal issues (keep cable runs reasonable following installation best practices), poor connection quality or damaged connectors may cause intermittent operation (ensure secure connections using quality marine-grade connectors), exceeding two remote controllers per Y-adaptor (beyond design specifications) may cause functionality issues. Properly installed MMC-2Y with two remote controllers provides reliable performance equivalent to single remote controller installation. If functionality issues occur: verify all connections secure and corrosion-free, check cable routing for damage or chafing, confirm remote controllers individually functional (test each separately), ensure MediaMaster source unit firmware current, consult JL Audio support if problems persist. Q: Can I use MMC-2Y with non-JL Audio marine stereos or remote controllers? A: MMC-2Y specifically engineered for JL Audio MediaMaster systems using proprietary connection protocols and communication architecture. Using with non-JL Audio equipment: not recommended, compatibility not guaranteed, functionality uncertain without MediaMaster-specific protocols, potential for equipment damage or malfunction if connection specifications incompatible. JL Audio marine audio systems use specific communication protocols between source units and remote controllers—MMC-2Y designed for these protocols. Non-JL Audio equipment likely uses different communication standards, connector pinouts, voltage levels, or signal types incompatible with MMC-2Y. For non-JL Audio marine stereo remote controller expansion: consult manufacturer for approved connection methods, manufacturer may offer specific Y-adaptors or splitters designed for their systems, some systems require NMEA 2000 network for multiple remotes, other systems may not support multiple remote controllers. For JL Audio MediaMaster systems: MMC-2Y ensures guaranteed compatibility, proper signal handling, reliable operation, and JL Audio quality standards. Attempting to use MMC-2Y with incompatible equipment risks: non-functional remote controllers, potential equipment damage from incorrect connections, voided warranties. Always use manufacturer-approved accessories for marine audio system expansion. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03431-00 AP 4-Channel Compact Marine Amplifier - Premium Bluetooth-Enabled Marine Amplifier with IP67 Water and Dust Protection, 40W x 4 RMS Class-D Amplification, 100W x 2 Bridged Output, Adjustable Bass Boost EQ, Wireless Remote Controller, Ultra-Compact Design, Surface and Flush Mounting Options, and Professional Marine Audio Performance for Space-Efficient Boat Audio Installations Achieve powerful efficient marine amplification in ultra-compact form using JL Audio JLA-010-03431-00 AP 4-Channel Compact Marine Amplifier—featuring innovative Bluetooth wireless technology enabling wireless audio streaming directly to amplifier without requiring separate source unit for standalone marine audio system configurations or supplemental streaming capability alongside traditional source units, robust IP67 water and dust protection rating ensuring complete dust-tight seal and protection against powerful water jets from any direction safeguarding internal electronics from harsh saltwater spray, moisture intrusion, and environmental exposure, substantial 40W x 4 RMS continuous power output at 4-ohm loads (14.4V input with less than 1% THD) providing sufficient amplification for four marine speakers or two-channel configurations, enhanced 50W x 4 RMS output at 2-ohm loads accommodating low-impedance speakers for increased power delivery, flexible 100W x 2 RMS bridged output capability combining channels for two-channel high-power applications or dedicated subwoofer driving requiring substantial bass amplification, advanced Class-D amplifier topology delivering exceptional power efficiency reducing heat generation and current draw enabling compact dimensions and reliable operation in confined marine equipment compartments where traditional Class AB amplifiers impractical, ultra-compact dimensions (185mm width x 125mm depth x 47mm height / 7.28" x 4.9" x 1.86") significantly smaller than traditional marine amplifiers enabling installation in tight spaces, under helm panels, behind dash areas, or small equipment compartments where conventional amplifiers cannot fit, adjustable bass boost EQ providing 0 to +18dB gain at 37Hz enhancing low-frequency response for systems requiring additional bass impact without dedicated subwoofers or supplementing existing subwoofer systems, included wireless remote controller enabling convenient volume adjustment, source selection, and system control from dash-mounted or panel-mounted location with flush or surface mounting options, comprehensive installation hardware package including surface mounting cup with screws, amplifier mounting hardware, flush mounting template for remote controller, waterproof gasket for remote controller, and complete documentation, wide input sensitivity range (200mV-8V RMS) with switchable low (200mV-2V RMS) and high (800mV-8V RMS) settings accommodating various source unit output levels, excellent signal-to-noise ratio (>70dB referred to 1W, A-weighted, 20Hz-20kHz) ensuring clean amplification with minimal background noise, full-range frequency response (20Hz-20kHz, +0/-1dB) delivering accurate reproduction across entire audible spectrum from deep bass to high treble, extensive protection circuits including input under/over voltage protection, over-temperature protection, and output short circuit protection safeguarding amplifier and connected speakers from damage, wide operating voltage range (9-16 VDC) accommodating standard 12V marine electrical systems with tolerance for voltage fluctuations, extreme operating temperature range (-20°C to 65°C / -4°F to 149°F) ensuring reliable performance from cold winter storage to hot summer operation in exposed marine environments, minimal standby current consumption (<1mA) preventing battery drain when system powered but not actively playing, efficient idle current draw (700-750mA) minimizing electrical system impact during operation, 35A fuse protection with compatibility for AFS, AGU, or MaxiFuse types, 4 AWG minimum copper power and ground wire gauge recommendations ensuring adequate current delivery and voltage stability, extensive compatibility with premium marine speaker brands including Fusion EL Series, FM Series, SM Series, XS Series marine speakers and subwoofers, JL Audio M3 Marine Speakers, M3 Marine Subwoofers, and M3 Enclosed Tower Speakers, three-year manufacturer warranty demonstrating JL Audio confidence in product reliability and construction quality, and proven JL Audio marine audio engineering delivering professional-grade compact amplification solution for recreational boats, fishing vessels, pontoon boats, center console boats, personal watercraft, sailing yachts, and space-constrained marine applications requiring powerful reliable amplification with Bluetooth streaming capability, IP67 environmental protection, and flexible installation options in ultra-compact form factor. Product Overview JL Audio JLA-010-03431-00 AP 4-channel compact marine amplifier with Bluetooth technology, IP67 water/dust rating, 40W x 4 RMS @ 4 ohm (50W x 4 @ 2 ohm), 100W x 2 bridged, Class-D efficiency, bass boost EQ, and wireless remote controller. Ultra-compact marine amplifier delivering professional performance in space-efficient design. Ultra-compact dimensions (185mm x 125mm x 47mm / 7.28" x 4.9" x 1.86") significantly smaller than traditional marine amplifiers. Enables installation in tight spaces under helm panels, behind dash areas, small equipment compartments, or confined locations where conventional amplifiers cannot fit. Compact form factor does not compromise performance or reliability. IP67 water and dust protection rating provides complete dust-tight seal and protection against powerful water jets from any direction. Suitable for exposed marine installations, equipment compartments with moisture exposure, or locations experiencing saltwater spray. IP67 certification ensures reliable operation in harsh marine environments. Advanced Class-D amplifier topology delivers exceptional power efficiency reducing heat generation compared to traditional Class AB designs. Lower heat output enables compact dimensions, reduces cooling requirements, and improves reliability in confined spaces. Efficient operation minimizes current draw from vessel electrical system. Substantial power output: 40W x 4 RMS @ 4 ohm (14.4V input, <1% THD) for four-channel speaker configurations, 50W x 4 RMS @ 2 ohm for enhanced output with low-impedance speakers, 100W x 2 RMS bridged combining channels for two-channel high-power applications or dedicated subwoofer driving. Bluetooth wireless technology enables direct audio streaming to amplifier without separate source unit. Standalone marine audio system configurations using smartphones or tablets as audio source. Supplemental streaming capability alongside traditional wired source units. Wireless convenience eliminating cable connections for portable devices. Adjustable bass boost EQ provides 0 to +18dB gain at 37Hz. Enhances low-frequency response for systems without dedicated subwoofers. Supplements existing subwoofer systems requiring additional bass impact. Adjustable from no boost (flat response) to maximum +18dB at 37Hz enabling customized bass response. Included wireless remote controller provides convenient dash-mounted or panel-mounted control. Volume adjustment, source selection, system control from accessible location. Flush mounting option with included template and waterproof gasket for clean integrated appearance. Surface mounting option with included cup for simpler installation. Remote eliminates need to access amplifier location for adjustments. Wide input sensitivity range (200mV-8V RMS) with switchable settings. Low setting (200mV-2V RMS) for aftermarket source units with standard output levels. High setting (800mV-8V RMS) for OEM source units or high-output aftermarket units. Switchable sensitivity accommodates various source equipment without requiring additional adapters. Excellent signal-to-noise ratio (>70dB) ensures clean amplification with minimal background noise. Full-range frequency response (20Hz-20kHz, +0/-1dB) delivers accurate reproduction across entire audible spectrum. Professional audio performance maintaining signal fidelity throughout amplification process. Comprehensive protection circuits: input under/over voltage protection preventing damage from electrical system fluctuations, over-temperature protection shutting down amplifier if excessive heat detected, output short circuit protection safeguarding amplifier and speakers from wiring faults or speaker failures. Wide operating voltage range (9-16 VDC) accommodates 12V marine electrical systems with tolerance for voltage variations. Extreme operating temperature range (-20°C to 65°C) ensures reliable performance across seasonal temperature variations and exposed marine installations. Minimal standby current (<1mA) prevents battery drain when powered but inactive. Efficient idle current (700-750mA) minimizes electrical system impact. 35A fuse protection with AFS, AGU, or MaxiFuse compatibility. 4 AWG minimum power/ground wire gauge recommended. Extensive compatibility with Fusion EL, FM, SM, and XS Series marine speakers, subwoofers, and tower speakers. JL Audio M3 Marine Speakers, Subwoofers, and Enclosed Tower Speakers. Fusion Sound-Panel and in-ceiling speakers. Three-year manufacturer warranty. Complete installation package: 4-channel amplifier with Bluetooth, wireless remote controller, surface mounting cup with screws, amplifier mounting hardware, flush mounting template, waterproof gasket for remote, comprehensive documentation. 4-Channel Class-D Amplification - Advanced Class-D amplifier topology delivering 40W x 4 RMS @ 4 ohm (50W x 4 @ 2 ohm) with exceptional power efficiency, reduced heat generation, and compact form factor enabling installation in tight marine spaces. IP67 Water and Dust Protection - Robust IP67 environmental protection rating providing complete dust-tight seal and protection against powerful water jets from any direction ensuring reliable operation in harsh saltwater spray, moisture exposure, and demanding marine environments. Bluetooth Wireless Technology - Integrated Bluetooth connectivity enabling direct wireless audio streaming to amplifier from smartphones, tablets, or Bluetooth devices without requiring separate source unit for standalone system configurations or supplemental streaming capability. Ultra-Compact Dimensions - Space-efficient design (185mm x 125mm x 47mm / 7.28" x 4.9" x 1.86") significantly smaller than traditional marine amplifiers enabling installation under helm panels, behind dash areas, small equipment compartments, or confined locations. 100W x 2 Bridged Output - Flexible bridged operation combining channels delivering 100W x 2 RMS for two-channel high-power applications, dedicated subwoofer driving, or systems requiring substantial power output from compact amplifier. Adjustable Bass Boost EQ - Variable bass boost control providing 0 to +18dB gain at 37Hz enhancing low-frequency response for systems without dedicated subwoofers or supplementing existing bass systems with adjustable bass enhancement. Wireless Remote Controller - Included wireless remote controller with flush and surface mounting options enabling convenient dash-mounted or panel-mounted volume control, source selection, and system management without accessing amplifier location. Switchable Input Sensitivity - Wide input sensitivity range (200mV-8V RMS) with switchable low (200mV-2V RMS) and high (800mV-8V RMS) settings accommodating aftermarket and OEM source units with various output levels. Excellent Signal-to-Noise Ratio - Superior signal-to-noise ratio (>70dB referred to 1W, A-weighted) ensuring clean amplification with minimal background noise maintaining audio fidelity and professional sound quality. Full-Range Frequency Response - Complete frequency response coverage (20Hz-20kHz, +0/-1dB) delivering accurate reproduction across entire audible spectrum from deep bass frequencies to high treble ensuring balanced natural sound. Comprehensive Protection Circuits - Multiple protection systems including input under/over voltage protection, over-temperature protection, and output short circuit protection safeguarding amplifier and connected speakers from damage. Extreme Operating Temperature Range - Wide operating temperature range (-20°C to 65°C / -4°F to 149°F) ensuring reliable performance from cold winter storage to hot summer operation in exposed marine installations. Minimal Current Draw - Efficient power management with minimal standby current (<1mA) preventing battery drain and low idle current (700-750mA) reducing electrical system impact during operation. Premium Marine Speaker Compatibility - Extensive compatibility with Fusion and JL Audio premium marine speaker brands including EL, FM, SM, and XS Series speakers, subwoofers, tower speakers, and M3 Marine audio products. Three-Year Warranty - Comprehensive three-year manufacturer warranty demonstrating JL Audio confidence in product reliability, construction quality, and long-term marine performance. Complete Installation Package - Comprehensive installation hardware including wireless remote controller, surface mounting cup, amplifier mounting screws, flush mounting template, waterproof gasket, and complete documentation. Technical Specifications Specification Details Model AP (4-Channel Compact Marine Amplifier) Part Number JLA-010-03431-00 Brand JL Audio Product Type Marine Amplifier (4-Channel with Bluetooth) Channels 4 Amplifier Class Class-D Dimensions (W x D x H) 185 x 125 x 47 mm (7.28" x 4.9" x 1.86") Water/Dust Rating IP67 Operating Voltage 9-16 VDC Operating Temperature Range -20°C to 65°C (-4°F to 149°F) Rated Power @ 4 Ohm 40W x 4 RMS (14.4V input, <1% THD) Rated Power @ 2 Ohm 50W x 4 RMS (14.4V input, <1% THD) Bridged Power Output 100W x 2 RMS Frequency Response 20 Hz - 20 kHz (+0, -1dB) Signal-to-Noise Ratio > 70 dB (A-weighted, 20 Hz - 20 kHz, referred to 1W) THD+N @ Rated Power <1% @ 4 Ω per channel Input Sensitivity @ RCA 200mV - 8V RMS Input Voltage Range Low: 200mV - 2V RMS / High: 800mV - 8V RMS (switchable) Input Impedance 11 kΩ (High) / 20 kΩ (Low) Bass Boost EQ 0 to +18 dB @ 37 Hz (adjustable) Current Draw (Standby) <1 mA Current Draw (Idle) 700-750 mA Fuse Rating 35 A Recommended Fuse Types AFS, AGU, or MaxiFuse Min. Power/Ground Wire Gauge 4 AWG copper wire Protection Circuits Input under/over voltage, over-temperature, output short circuit Bluetooth Technology Yes (integrated) Remote Controller Wireless remote included Mounting Options Surface mount (cup included) or flush mount (template included) Warranty 3 years Compatible Speakers Fusion EL/FM/SM/XS Series, JL Audio M3 Marine Speakers/Subwoofers Included Accessories Remote controller, surface mounting cup with screws, amplifier mounting screws, flush mounting template, waterproof gasket, documentation Frequently Asked Questions Q: What does IP67 rating mean and where can I install this amplifier? A: IP67 rating provides comprehensive environmental protection: "IP" = Ingress Protection standard, "6" = complete dust-tight protection (no dust ingress possible), "7" = protection against powerful water jets from any direction and temporary immersion up to 1 meter depth for 30 minutes. JL Audio AP amplifier suitable for: exposed marine equipment compartments experiencing saltwater spray, under-helm installations with potential moisture exposure, cockpit mounting locations with weather exposure, cabin installations requiring dust and moisture protection. IP67 certification ensures reliable operation in harsh marine environments with saltwater spray, rain, and humidity. Not designed for: continuous underwater submersion, permanent mounting below waterline. Installation requirements: ensure connections properly sealed using marine-grade connectors and heat shrink, verify mounting location allows drainage preventing water pooling around amplifier, maintain proper orientation allowing water runoff if temporary immersion occurs. IP67 protection significantly exceeds typical marine amplifier ratings (often IP65 or lower) providing superior environmental durability. Regular maintenance: inspect mounting location for water intrusion, verify connections remain sealed, clean amplifier exterior removing salt deposits. Properly installed IP67-rated amplifier provides reliable long-term performance in demanding marine environments. Q: Can I use this amplifier without a traditional marine stereo head unit? A: Yes—JL Audio AP amplifier features integrated Bluetooth technology enabling standalone operation without traditional source unit. Bluetooth operation: pair smartphone, tablet, or Bluetooth-enabled device directly with amplifier, stream music wirelessly to amplifier without separate head unit, control playback from mobile device, adjust volume using included wireless remote controller. Standalone system advantages: simplified installation eliminating source unit requirement, reduced equipment cost (no separate head unit purchase), clean helm appearance without visible head unit, ideal for vessels with limited dash space or minimal audio requirements. Supplemental use: AP amplifier also functions alongside traditional source units—connect wired RCA inputs from existing head unit while retaining Bluetooth capability for supplemental wireless streaming. Bluetooth limitations: requires charged mobile device onboard vessel for audio source, weather protection required for mobile device (IP67 rating protects amplifier not connected devices), mobile device battery life considerations for extended listening. Typical applications: small boats requiring simple audio system without full-featured head unit, secondary audio zones supplementing primary system, retrofit installations adding Bluetooth without replacing existing equipment, budget-conscious installations minimizing equipment quantity. If comprehensive control features required (AM/FM radio, NMEA 2000 integration, multi-zone control): traditional source unit plus AP amplifier provides complete solution. For basic Bluetooth streaming with volume control: AP amplifier functions as complete standalone system. Q: What is the difference between 4-channel, bridged, and 2-ohm operation? A: JL Audio AP amplifier supports multiple operating configurations: 4-channel operation (40W x 4 @ 4 ohm): connect four speakers (two front, two rear, or four distributed locations), each channel delivers 40W RMS, ideal for standard four-speaker marine systems, maintains independent control of each speaker. 4-channel operation (50W x 4 @ 2 ohm): connect four 2-ohm speakers for increased power output, each channel delivers 50W RMS (25% more power than 4-ohm), requires speakers rated for 2-ohm operation, increased current draw from electrical system. Bridged operation (100W x 2): combine channel pairs (channels 1+2 and 3+4) for two high-power outputs, delivers 100W RMS per bridged pair (2.5x power of single 4-ohm channel), ideal for subwoofer applications requiring substantial power, reduces total speaker quantity to two, bridged configuration requires specific wiring (consult documentation). Configuration selection depends on: number of speakers in system (four speakers = 4-channel, two speakers = bridged), power requirements (standard speakers = 4-channel, subwoofers or high-power speakers = bridged), speaker impedance (verify speaker specifications before selecting configuration). Most marine audio systems use 4-channel @ 4 ohm configuration powering four marine speakers. Bridged configuration ideal for: dedicated subwoofer installations, tower speaker applications requiring high power, two-speaker stereo systems in small boats. Cannot simultaneously use 4-channel and bridged modes—select single configuration based on system requirements. Consult installation documentation for proper wiring diagrams ensuring safe reliable operation. Q: How do I install and use the wireless remote controller? A: JL Audio AP amplifier includes wireless remote controller with flexible mounting options: Installation methods: Flush mounting (clean integrated appearance): use included flush mounting template marking cutout dimensions on dash or panel, cut mounting hole following template specifications, install included waterproof gasket around cutout preventing water intrusion, insert remote controller into cutout from front side, secure from rear using mounting hardware, gasket provides weather-tight seal and IP protection. Surface mounting (simpler installation): attach included surface mounting cup to dash or panel using provided screws, insert remote controller into mounting cup, secure with retaining mechanism, surface mount provides quick installation without cutting dashboard. Remote controller functions: volume adjustment controlling amplifier output level, source selection switching between inputs (Bluetooth, wired RCA), system power control, bass boost adjustment (if accessible from remote), wireless operation eliminating cable between remote and amplifier. Mounting location selection: choose accessible location easily reached from driver/operator position, avoid locations subject to direct sun exposure (reducing LCD visibility or causing heat buildup), ensure mounting surface provides adequate backing for secure attachment, verify wireless signal reaches amplifier from chosen location (typically reliable within typical helm/cockpit distances), avoid areas with excessive vibration or impact risk. Waterproof gasket importance: gasket critical for flush-mounted installations maintaining environmental protection, improper gasket installation compromises weather resistance allowing water intrusion, verify gasket properly seated during installation. Remote pairing: remote typically pre-paired with amplifier from factory, if pairing required consult documentation for pairing procedure. Wireless operation eliminates need to access amplifier location for volume adjustments or source changes providing convenient control from helm position. Professional installation recommended for flush mounting requiring dashboard cutting. Q: What wire gauge and fusing do I need for installation? A: JL Audio AP amplifier requires proper power and ground wiring for safe reliable operation: Minimum wire gauge: 4 AWG copper wire recommended for power and ground connections, 4 AWG provides adequate current capacity for amplifier's 35A fuse rating with minimal voltage drop, undersized wire causes voltage drop reducing amplifier performance and creating fire hazard from excessive heat, use marine-grade tinned copper wire resisting corrosion in saltwater environments. Fuse requirements: 35A fuse rated capacity, install fuse within 18 inches of battery positive terminal (marine electrical standards), accepted fuse types: AFS (automotive fuse), AGU (glass tube fuse), MaxiFuse (blade-style high-current fuse), use marine-grade fuse holder with weather protection. Wiring calculation factors: amplifier maximum current draw determines wire gauge requirement, longer wire runs require heavier gauge compensating for increased resistance, ambient temperature affects wire current capacity, consult marine electrical code or wiring charts for specific installation requirements. Ground connection importance: ground wire equally important as power wire (use same 4 AWG gauge), connect directly to vessel negative bus bar or battery negative terminal, ensure clean metal-to-metal contact at ground point removing paint or corrosion, poor ground connections cause operational issues and potential damage. Installation best practices: use marine-grade crimp connectors or solder connections with marine heat shrink, avoid household electrical supplies (non-marine grade corrodes quickly), route power wires through proper channels avoiding chafing or heat sources, label all connections for future service, verify connections tight and secure. Professional installation recommended ensuring proper wire gauge selection, fuse placement, and connection methods meeting marine electrical standards and preventing electrical hazards. Improper wiring voids warranty and creates safety risks.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03429-00 AP Marine Amplifiers - Premium IP67-Rated Compact Marine Amplifier Series with Class-D Efficiency, Available in Monoblock, 4-Channel, and 6-Channel Configurations, Variable Crossover Filters, Adjustable Bass Boost EQ, Advanced Signal Processing, Extreme Operating Temperature Range, and Professional Marine Audio Performance for Versatile Boat Audio Installations Achieve powerful versatile marine amplification using JL Audio JLA-010-03429-00 AP Marine Amplifier Series—available in three configurations: Monoblock delivering 300W x 1 RMS @ 2 ohm for dedicated subwoofer amplification with specialized low-pass filtering and infrasonic protection, 4-Channel providing 50W x 4 RMS @ 4 ohm (75W x 4 @ 2 ohm, 150W x 2 bridged) for four-speaker systems or high-power two-channel applications, and 6-Channel combining 50W x 4 RMS (channels 1-4) plus 100W x 2 RMS (channels 5-6, 300W x 1 bridged) enabling complete speaker and subwoofer systems from single amplifier, robust IP67 water and dust protection ensuring reliable operation in harsh saltwater environments with complete environmental sealing against spray and moisture intrusion, advanced Class-D topology delivering exceptional power efficiency with reduced heat generation enabling compact installation in confined spaces, ultra-compact dimensions with Monoblock/4-Channel measuring 265mm x 125mm x 47mm and 6-Channel measuring 300mm x 150mm x 47mm fitting under helm panels or small equipment compartments, sophisticated signal processing including user-selectable high-pass/low-pass/full-range filters with 12dB/octave slopes and 20Hz-500Hz range for precise speaker integration, adjustable bass boost EQ (0 to +18dB @ 37Hz), defeatable infrasonic filter (20Hz-50Hz) on Monoblock and 6-Channel protecting subwoofers from damaging subsonic frequencies, wide input sensitivity range (200mV-8V RMS) with switchable low/high settings accommodating various source units, excellent signal-to-noise ratio (>70dB) ensuring clean amplification, comprehensive protection circuits including under/over voltage, over-temperature, and short circuit protection, extreme operating temperature range (-20°C to 65°C), minimal current draw (<1mA standby), appropriate fuse protection (35A Monoblock/4-Channel, 70A 6-Channel), extensive compatibility with Fusion and JL Audio M3 marine speakers and subwoofers, three-year warranty, and proven JL Audio engineering delivering professional-grade amplification for recreational boats, fishing vessels, center console boats, and marine applications requiring powerful reliable IP67-protected amplification with flexible configuration options. Product Overview JL Audio JLA-010-03429-00 AP marine amplifier series with IP67 water/dust rating available in three configurations: Monoblock (dedicated subwoofer amplification), 4-Channel (four-speaker systems), and 6-Channel (complete speaker and subwoofer systems). Compact Class-D amplifiers delivering professional performance with advanced signal processing. Monoblock Configuration: Dedicated subwoofer amplification delivering 300W x 1 RMS @ 2 ohm (200W x 1 @ 4 ohm). Specialized for powerful bass reproduction with optimized 10Hz-500Hz frequency response. Features defeatable infrasonic filter (20Hz-50Hz) protecting subwoofers from damaging subsonic frequencies. Output polarity switch enables phase adjustment for optimal bass integration. Variable low-pass crossover (20Hz-500Hz, 12dB/octave) precisely tailoring subwoofer frequency range. Adjustable bass boost EQ (0 to +18dB @ 37Hz). Compact dimensions: 265mm x 125mm x 47mm (10.43" x 4.9" x 1.85"). Ideal for dedicated subwoofer systems requiring substantial power and precise bass control. 4-Channel Configuration: Versatile four-channel amplification delivering 50W x 4 RMS @ 4 ohm (75W x 4 @ 2 ohm) or 150W x 2 RMS bridged. Full-range frequency response (20Hz-20kHz) suitable for complete speaker systems. Independent channel pairs (1-2 and 3-4) feature user-selectable filtering: Off (full-range), Low-Pass, or High-Pass with 12dB/octave slopes and 20Hz-500Hz range. Enables flexible configurations: four full-range speakers, bi-amped systems with separate highs/lows, or bridged two-channel high-power applications. Adjustable bass boost EQ. Compact dimensions: 265mm x 125mm x 47mm. Ideal for four-speaker marine systems, tower speaker applications, or two-channel high-power configurations. 6-Channel Configuration: Comprehensive system amplification combining mid-power channels 1-4 (50W x 4 RMS @ 4 ohm / 75W x 4 @ 2 ohm / 150W x 2 bridged) with high-power channels 5-6 (100W x 2 RMS @ 4 ohm / 150W x 2 @ 2 ohm / 300W x 1 bridged). Enables complete system solutions: channels 1-4 power four cabin speakers while channels 5-6 drive tower speakers, subwoofers, or additional high-power zones. Independent filtering per channel pair: channels 1-2, 3-4, and 5-6 each feature Off/Low-Pass/High-Pass selection with 12dB/octave slopes and 20Hz-500Hz range. Channels 5-6 include defeatable infrasonic filter (20Hz-50Hz) when used for subwoofer duty. Adjustable bass boost EQ. Larger dimensions: 300mm x 150mm x 47mm (11.81" x 5.9" x 1.85"). Ideal for complete marine audio systems requiring single amplifier solution for speakers and subwoofers. All configurations feature IP67 water/dust protection providing complete environmental sealing against harsh marine conditions. Advanced Class-D topology delivers exceptional efficiency reducing heat generation and current draw. Compact form factors enable installation in tight spaces under helm panels or small equipment compartments. Sophisticated signal processing enables precise system tuning: variable crossover filters integrate speakers and subwoofers optimally, adjustable bass boost enhances low-frequency response, infrasonic filtering (Monoblock and 6-Channel channels 5-6) protects subwoofers from damaging subsonic content. Wide input sensitivity range (200mV-8V RMS) with switchable low/high settings accommodates various source equipment. Excellent signal-to-noise ratio (>70dB) ensures clean amplification. Comprehensive protection circuits safeguard amplifier and speakers from electrical faults, overheating, and short circuits. Extreme operating temperature range (-20°C to 65°C) ensures reliable performance across seasonal variations and exposed installations. Minimal standby current (<1mA) prevents battery drain. Efficient idle current minimizes electrical system impact. Appropriate fuse protection: 35A (Monoblock/4-Channel) or 70A (6-Channel) with AFS/AGU/MaxiFuse compatibility. 4 AWG minimum power/ground wire gauge recommended. Extensive compatibility with Fusion Apollo, RA Series, EL/FM/SM/XS marine speakers, subwoofers, and tower speakers. JL Audio M3 Marine audio products. Complete installation package includes amplifier, mounting screws, and documentation. Three-year manufacturer warranty. IP67 Water and Dust Protection - Robust IP67 environmental protection rating providing complete dust-tight seal and protection against powerful water jets from any direction ensuring reliable operation in harsh saltwater spray, moisture exposure, and demanding marine environments across all amplifier configurations. Three Configuration Options - Comprehensive amplifier series offering Monoblock (300W x 1 dedicated subwoofer), 4-Channel (50W x 4 versatile speaker amplification), and 6-Channel (50W x 4 plus 100W x 2 complete system solution) addressing diverse marine audio system requirements with single product family. Advanced Class-D Efficiency - Class-D amplifier topology across all configurations delivering exceptional power efficiency, reduced heat generation, minimal current draw, and compact dimensions enabling installation in confined marine spaces while maintaining professional power output levels. Variable Crossover Filters - Sophisticated user-selectable filtering per channel pair with Off/Low-Pass/High-Pass modes, 12dB/octave slopes, and 20Hz-500Hz frequency range enabling precise speaker and subwoofer integration, bi-amping configurations, and system optimization. Monoblock Subwoofer Specialization - Dedicated Monoblock configuration optimized for subwoofer duty with 300W x 1 RMS @ 2 ohm output, 10Hz-500Hz frequency response, defeatable infrasonic filter (20Hz-50Hz), output polarity switch for phase adjustment, and specialized bass processing. 6-Channel System Solution - Comprehensive 6-Channel configuration combining mid-power channels (50W x 4) with high-power channels (100W x 2 / 300W x 1 bridged) enabling complete system amplification for speakers and subwoofers from single compact amplifier eliminating multiple amplifier requirements. Adjustable Bass Boost EQ - Variable bass boost control across all configurations providing 0 to +18dB gain at 37Hz enhancing low-frequency response for systems requiring additional bass impact or supplementing existing subwoofer systems with adjustable enhancement. Infrasonic Filter Protection - Defeatable infrasonic filter (20Hz-50Hz) on Monoblock and 6-Channel configurations protecting subwoofers from damaging subsonic frequencies below audible range preventing cone over-excursion and mechanical damage. Flexible Bridging Capability - 4-Channel and 6-Channel configurations support bridged operation: 4-Channel delivers 150W x 2 bridged, 6-Channel delivers 150W x 2 (channels 1-4) or 300W x 1 (channels 5-6) enabling high-power two-channel or dedicated subwoofer applications. Compact Space-Efficient Design - Optimized dimensions per configuration: Monoblock/4-Channel (265mm x 125mm x 47mm) and 6-Channel (300mm x 150mm x 47mm) enabling installation under helm panels, behind dash areas, or small equipment compartments where traditional amplifiers cannot fit. Switchable Input Sensitivity - Wide input sensitivity range (200mV-8V RMS) with switchable low (200mV-2V RMS) and high (800mV-8V RMS) settings accommodating aftermarket and OEM source units with various output levels without requiring additional signal adapters. Excellent Signal-to-Noise Ratio - Superior signal-to-noise ratio (>70dB referred to 1W, A-weighted) across all configurations ensuring clean amplification with minimal background noise maintaining audio fidelity and professional sound quality throughout power range. Optimized Frequency Response - Application-specific frequency response: Monoblock (10Hz-500Hz) optimized for subwoofer duty extending below audible range, 4-Channel and 6-Channel (20Hz-20kHz) covering complete audible spectrum for full-range speaker amplification. Comprehensive Protection Circuits - Multiple protection systems including input under/over voltage protection, over-temperature protection, and output short circuit protection safeguarding amplifier and connected speakers from electrical faults, overheating, and wiring errors. Extreme Operating Temperature Range - Wide operating temperature range (-20°C to 65°C / -4°F to 149°F) ensuring reliable performance from cold winter storage to hot summer operation in exposed marine installations across all climate conditions. Minimal Current Draw - Efficient power management with minimal standby current (<1mA) preventing battery drain and low idle current (700-750mA Monoblock/4-Channel, 1000-1500mA 6-Channel) reducing electrical system impact during operation. Premium Marine Audio Compatibility - Extensive compatibility with Fusion Apollo, RA Series, EL/FM/SM/XS marine speakers, subwoofers, and tower speakers plus JL Audio M3 Marine audio products ensuring seamless integration with premium marine speaker systems. Technical Specifications Specification Monoblock 4-Channel 6-Channel Part Number JLA-010-03429-00 JLA-010-03429-00 JLA-010-03429-00 Brand JL Audio JL Audio JL Audio Channels 1 (Monoblock) 4 6 Amplifier Class Class-D Class-D Class-D Dimensions (W x D x H) 265 x 125 x 47 mm (10.43" x 4.9" x 1.85") 265 x 125 x 47 mm (10.43" x 4.9" x 1.85") 300 x 150 x 47 mm (11.81" x 5.9" x 1.85") Water/Dust Rating IP67 IP67 IP67 Operating Voltage 9-16 VDC 9-16 VDC 9-16 VDC Operating Temperature -20°C to 65°C (-4°F to 149°F) -20°C to 65°C (-4°F to 149°F) -20°C to 65°C (-4°F to 149°F) Rated Power @ 4 Ohm 200W x 1 RMS (<1% THD) 50W x 4 RMS / 150W x 2 bridged (<1% THD) Ch. 1-4: 50W x 4 / 150W x 2 bridged; Ch. 5-6: 100W x 2 / 300W x 1 bridged (<1% THD) Rated Power @ 2 Ohm 300W x 1 RMS (<1% THD) 75W x 4 RMS (<1% THD) Ch. 1-4: 75W x 4; Ch. 5-6: 150W x 2 (<1% THD) Frequency Response 10 Hz - 500 Hz (+0, -1dB) 20 Hz - 20 kHz (+0, -1dB) 20 Hz - 20 kHz (+0, -1dB) Signal-to-Noise Ratio > 70 dB (A-weighted, referred to 1W) > 70 dB (A-weighted, referred to 1W) > 70 dB (A-weighted, referred to 1W) THD+N @ Rated Power <1% @ 4 Ω <1% @ 4 Ω per channel <1% @ 4 Ω per channel Input Sensitivity 200mV - 8V RMS 200mV - 8V RMS 200mV - 8V RMS Input Voltage Range Low: 200mV-2V / High: 800mV-8V (switchable) Low: 200mV-2V / High: 800mV-8V (switchable) Low: 200mV-2V / High: 800mV-8V (switchable) Input Impedance 11 kΩ (High) / 20 kΩ (Low) 11 kΩ (High) / 20 kΩ (Low) 11 kΩ (High) / 20 kΩ (Low) Crossover Filters Low-Pass (20-500Hz, 12dB/octave) Ch. 1-2, 3-4: Off/Low-Pass/High-Pass (20-500Hz, 12dB/octave) Ch. 1-2, 3-4, 5-6: Off/Low-Pass/High-Pass (20-500Hz, 12dB/octave) Bass Boost EQ 0 to +18 dB @ 37 Hz 0 to +18 dB @ 37 Hz 0 to +18 dB @ 37 Hz Infrasonic Filter 20-50 Hz (defeatable) N/A 20-50 Hz (defeatable, Ch. 5-6 only) Output Polarity Switch Yes No No Current Draw (Standby) <1 mA <1 mA <1 mA Current Draw (Idle) 700-750 mA 700-750 mA 1000-1500 mA Fuse Rating 35 A 35 A 70 A Recommended Fuse Types AFS, AGU, or MaxiFuse AFS, AGU, or MaxiFuse AFS, AGU, or MaxiFuse Min. Wire Gauge 4 AWG copper 4 AWG copper 4 AWG copper Protection Circuits Input under/over voltage, over-temperature, output short circuit Input under/over voltage, over-temperature, output short circuit Input under/over voltage, over-temperature, output short circuit Warranty 3 years 3 years 3 years Included Accessories Amplifier, 4 mounting screws, documentation Amplifier, 4 mounting screws, documentation Amplifier, 4 mounting screws, documentation Frequently Asked Questions Q: Which JL Audio AP amplifier configuration should I choose for my system? A: Configuration selection depends on system requirements: Monoblock: Choose for dedicated subwoofer systems requiring substantial bass amplification (300W x 1 @ 2 ohm). Ideal when separate amplifier powering cabin speakers already installed. Best for systems prioritizing powerful bass reproduction with specialized subwoofer controls (infrasonic filter, output polarity, optimized low-pass filtering). 4-Channel: Choose for standard four-speaker marine systems without subwoofer, tower speaker applications requiring high power (150W x 2 bridged), or systems needing flexible speaker configurations with independent filtering per channel pair. Ideal for boats with four cabin speakers, two tower speakers, or bi-amped speaker systems. 6-Channel: Choose for complete system solutions requiring single amplifier for speakers and subwoofers. Channels 1-4 power four cabin speakers while channels 5-6 drive subwoofers (300W x 1 bridged) or tower speakers (100W x 2). Eliminates multiple amplifier installations reducing complexity and equipment quantity. Best for comprehensive systems with multiple speaker zones plus subwoofers. Consider: total speaker quantity (four speakers = 4-Channel, four speakers plus subwoofer = 6-Channel, subwoofer only = Monoblock), power requirements per speaker (verify speaker power handling matches amplifier output), installation space (all compact but 6-Channel slightly larger), and future expansion plans (6-Channel provides flexibility for adding subwoofers or additional zones). Q: How do I use the variable crossover filters for optimal system integration? A: Variable crossover filters enable precise speaker and subwoofer integration: Filter modes per channel pair: Off = full-range operation (20Hz-20kHz, no filtering), Low-Pass = passes frequencies below selected point (for subwoofers or bass speakers), High-Pass = passes frequencies above selected point (for mid-range and tweeters protecting from excessive bass). Filter frequency range: 20Hz-500Hz adjustable with 12dB/octave slope. Common configurations: 4-Channel for four full-range speakers: set all channels to "Off" (full-range). 4-Channel bi-amped system: channels 1-2 set to High-Pass (protecting speakers from excessive bass), channels 3-4 set to Low-Pass (dedicated bass speakers or small subwoofers). 6-Channel complete system: channels 1-4 set to High-Pass (cabin speakers without bass overload), channels 5-6 set to Low-Pass (subwoofer duty) with appropriate crossover point (typically 80-120Hz for subwoofers). Setting crossover points: match speaker specifications (small speakers benefit from higher high-pass points protecting from bass damage), subwoofer crossover typically 80-100Hz for sealed enclosures or 100-120Hz for ported enclosures, adjust by ear for seamless transition between speakers and subwoofers. 12dB/octave slope: moderate slope providing smooth transition between filtered frequency ranges without sharp cutoffs. Consult speaker and subwoofer documentation for manufacturer-recommended crossover points ensuring optimal performance and preventing damage from excessive excursion. Q: What is the infrasonic filter and when should I use it? A: Infrasonic filter (Monoblock and 6-Channel channels 5-6) protects subwoofers from damaging subsonic frequencies below audible hearing range: Purpose: frequencies below 20Hz (subsonic/infrasonic) inaudible to humans but can cause excessive subwoofer cone excursion potentially damaging voice coils or suspensions, particularly from recorded material containing subsonic content (rumble, stage vibrations, microphone handling noise, recording imperfections), or poorly mastered recordings with excessive low-frequency energy. Filter operation: adjustable range 20Hz-50Hz with defeatable switch, when engaged filters out frequencies below selected point preventing subsonic content from reaching subwoofer, 12dB/octave slope gradually attenuating frequencies below cutoff. When to use: Enable (recommended): most applications benefit from infrasonic filtering protecting subwoofer investment, particularly for sealed enclosures more susceptible to subsonic excursion, when using recorded music sources (potential for subsonic content in recordings), systems with limited amplifier power (preventing wasted power on inaudible frequencies). Defeat (disable): specialized applications where subsonic response required (rare in marine applications), when using test tones or measurement equipment requiring full bandwidth, competition SPL applications prioritizing maximum cone excursion. Setting frequency: typical setting 25-30Hz provides protection while maintaining deep bass extension, higher settings (35-50Hz) for smaller subwoofers or ported enclosures, adjust based on subwoofer specifications and enclosure type. Protection benefit: infrasonic filtering prevents mechanical damage, reduces amplifier power waste on inaudible frequencies, and improves overall system reliability. Most users should enable infrasonic filter for optimal subwoofer protection and performance. Q: Can I mix different amplifier configurations in a single system? A: Yes—JL Audio AP amplifiers can be combined for comprehensive system solutions: Common combinations: Monoblock + 4-Channel: 4-Channel powers four cabin speakers while Monoblock drives subwoofer with dedicated controls, provides specialized subwoofer amplification plus separate speaker amplification, ideal for systems requiring maximum subwoofer power (300W) plus four-speaker coverage. Multiple 4-Channel amplifiers: two or more 4-Channel amplifiers for systems exceeding four speakers (eight speakers, tower speakers plus cabin speakers), enables zone separation with independent amplifiers per area. 6-Channel primary with additional amplifiers: 6-Channel handles main system (speakers plus subwoofer) with additional 4-Channel for tower speakers or secondary zones. Wiring considerations: each amplifier requires independent power and ground wiring (4 AWG minimum per amplifier), separate fusing per amplifier (35A or 70A depending on configuration), verify vessel electrical system capacity supports total amplifier current draw (sum all amplifier idle currents plus peak demands). Signal distribution: source unit must provide sufficient RCA outputs for all amplifiers (most marine source units include multiple RCA pre-outs), Y-splitters can distribute signal to multiple amplifiers if necessary, maintain proper gain structure setting each amplifier independently. Installation planning: verify adequate mounting space for multiple amplifiers (IP67 rating allows various mounting locations), organize power distribution system supporting multiple amplifiers, consider professional installation for complex multi-amplifier systems ensuring proper wiring, fusing, and configuration. Combining amplifiers provides flexibility matching specific system requirements without limitations of single-amplifier solutions. Q: What wire gauge, fusing, and electrical system requirements do I need? A: Proper electrical installation critical for safe reliable amplifier operation: Wire gauge requirements: 4 AWG minimum copper wire for power and ground connections (all configurations), use marine-grade tinned copper wire resisting saltwater corrosion, heavier gauge acceptable but not lighter (2 AWG or 1/0 AWG provide lower resistance for longer runs or multiple amplifiers). Fuse requirements: Monoblock/4-Channel: 35A fuse, 6-Channel: 70A fuse, install fuse within 18 inches of battery positive terminal (marine electrical code), use marine-grade fuse holder with weather protection, accepted fuse types: AFS, AGU, or MaxiFuse (blade-style high-current). Current consumption: Standby: <1mA (negligible battery drain), Idle: 700-750mA (Monoblock/4-Channel) or 1000-1500mA (6-Channel), Peak: varies with volume and speaker load (approach fuse rating during maximum output). Electrical system capacity: verify vessel alternator/charging system provides adequate current for amplifier(s) plus other electrical loads, typical marine alternators 40-100A rating must support total system demands, consider battery capacity for extended operation without engine running (deep-cycle marine batteries recommended for audio systems), multiple amplifiers require additional electrical capacity planning. Voltage requirements: 9-16 VDC operating range (standard 12V marine systems), amplifier performance optimized at 14.4V (typical alternator charging voltage), low voltage conditions reduce maximum power output and may trigger under-voltage protection. Ground connection importance: ground wire equal importance to power wire (same 4 AWG gauge), connect directly to vessel negative bus bar or battery negative terminal, ensure clean metal-to-metal contact removing paint/corrosion at ground point, poor grounds cause operational issues and potential amplifier damage. Multiple amplifier installations: each amplifier requires independent power and ground runs from battery, separate fusing per amplifier, do not share power/ground wires between amplifiers (causes voltage drop and potential damage). Professional marine audio installation strongly recommended ensuring proper electrical system capacity, wire sizing, fuse placement, and connection methods meeting marine electrical codes and preventing safety hazards. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less