OEX ACX3322 12V 100A Continuous Duty Solenoid Normally Open SPST Silver Alloy Contacts Copper Terminal Stud Insulated Return The OEX ACX3322 is a 12V, 100A continuous duty solenoid in a normally open (SPST) configuration. Unlike standard automotive relays designed for intermittent switching, a continuous duty solenoid is rated to carry its maximum current load indefinitely without overheating or cycling making it the correct choice for circuits that remain energised for extended periods, such as dual battery isolators, battery-to-battery charging enables and high-current accessory feeds that stay on throughout a working day or driving cycle. Silver alloy contacts, copper terminal stud, insulated return design, 5/16-24" main stud and 10-32 coil terminal. Covered by a one year warranty. Product overview A standard automotive relay is designed for intermittent switching brief periods of energisation with rest periods between. Using a standard relay in a circuit that stays on for extended periods risks premature failure from heat buildup. The ACX3322 is rated for continuous duty, carrying 100A indefinitely without cycling or requiring rest periods. This makes it the correct component for dual battery isolator circuits that remain closed throughout a drive, battery-to-battery charging enable circuits, solar charge controller switching and any high-current feed that remains on during vehicle operation. The normally open configuration means the contacts are open at rest and close when the 12V coil is energised. The insulated return design keeps the coil circuit electrically isolated from the main switching circuit, preventing ground loop issues in sensitive electrical systems. The main power stud uses a 5/16-24" thread (approximately 8mm diameter) accepting ring terminals with an 8.4mm or larger ID such as the OEX ACX3056. The coil trigger uses a 10-32 terminal for the low-current control signal, typically driven by a switch, relay or battery management system output. Features and benefits Continuous duty rated: Designed to carry 100A indefinitely without cycling or overheating. Not a standard intermittent-duty relay. Correct for circuits that stay energised for extended periods. 100A rating: High-current capacity for dual battery isolators, battery-to-battery charging enables, high-draw accessory feeds and battery management circuits. Normally open (SPST): Circuit is open at rest and closes when the 12V coil is energised. Opens again when the coil signal is removed. Silver alloy contacts: Low-resistance, high-durability contact material rated for sustained high-current switching. Copper terminal stud: Minimises resistance at the main power connection point. Insulated return: Coil circuit is electrically isolated from the main switching circuit, preventing ground loop issues in sensitive electrical systems. The coil negative must be connected to chassis earth or a dedicated negative. 5/16-24" main stud thread: Standard heavy-duty thread for the main power connection. Accepts ring terminals with 8.4mm or larger ID. 10-32 coil terminal: Low-current trigger connection for the energising signal. One year warranty: Covered by a one year OEX warranty. Technical specs Specification Detail SKU ACX3322 Brand OEX Type Continuous Duty Solenoid Voltage 12V Current Rating 100A Solenoid Action Normally Open (SPST) Contact Material Silver alloy Main Terminal Copper, 5/16-24" thread Coil Terminal 10-32 thread Insulated Return Yes Circuits 1 Pack Quantity 1 Weight 0.56kg Warranty One year Sold As Single unit Frequently asked questions What is the difference between a continuous duty solenoid and a standard relay? A standard automotive relay is designed for intermittent switching with rest periods between. A continuous duty solenoid is designed to remain energised and carry full current load indefinitely without overheating. For circuits that stay on for extended periods such as a dual battery isolator that remains closed throughout a drive a continuous duty solenoid is the correct component. Using a standard relay in this application risks premature failure from heat buildup. What does normally open mean? A normally open solenoid has contacts that are open (disconnected) when the coil is not energised. When 12V is applied to the coil terminals, the solenoid closes the contacts and completes the main circuit. The contacts open again when the coil signal is removed. What trigger signal does the coil require? The coil requires a 12V signal on the 10-32 coil terminal to energise. The coil current draw is typically low (a few hundred milliamps) and can be controlled by a switch, relay or battery management system output. The insulated return design means the coil negative must be connected to chassis earth or a dedicated negative it does not share a return path with the main power circuit. What cable and ring terminal size suit the 5/16-24" main stud? The 5/16" stud is approximately 8mm in diameter. Ring terminals with an 8.4mm or larger ID hole suit this stud, such as the OEX ACX3056 (8.4mm ID, blue). For cable carrying 100A, ensure the ring terminal cable range matches the wire size being used. Is this solenoid suitable for winch applications? A continuous duty solenoid is rated for sustained current, but winch applications involve high peak currents that can significantly exceed the continuous rating. Assess the winch's peak current draw against the solenoid's specifications before use in a winch circuit. For dedicated winch solenoid applications, a purpose-built winch solenoid pack may be more appropriate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX1944RBL 12V 70A High-Current Normally Open Mini Relay 4 Terminal 9.5mm Power Pins Resistor Spike Protection IP67 Single Unit The OEX ACX1944RBL is a 12V, 70A normally open mini relay with resistor spike protection, supplied as a single unit. Rated at 70A, this is a high-current relay suited to winches, high-draw accessories, starter motor bypass circuits and other demanding switching applications. It uses a four-terminal configuration as a high-current normally open relay there is no normally closed contact (87a). Terminals 87 and 30 use larger 9.5mm blade terminals to handle the higher current; coil terminals 85 and 86 use standard blade sizing. IP67 sealed housing with a fixed moulded mounting tab. Covered by a one year warranty. Product overview Standard 40A mini relays (such as the ACX1940RBL) use 6.3mm blade terminals throughout and include five pins with both normally open and normally closed contacts. The ACX1944RBL steps up to 70A with two important differences the power-carrying pins (30 and 87) use larger 9.5mm blade terminals rated for the higher current, and the normally closed contact (87a) is omitted, resulting in four terminals only. Wiring for this relay must use connectors or lugs sized for 9.5mm blades on the power pins; the coil terminals (85 and 86) use standard sizing. At 70A the ACX1944RBL suits winch and recovery equipment power circuits, high-draw lighting switching, starter motor bypass and isolation circuits and high-capacity auxiliary power feeds that exceed the 40A rating of standard mini relays. The resistor spike protection suppresses the voltage spike generated when the relay coil is de-energised, protecting ECU and control module outputs used to trigger the relay. The IP67 sealed housing provides full protection against dust and temporary water immersion for underbonnet and exposed mounting. The moulded mounting tab is fixed into the relay body rather than removable. Features and benefits 70A rating: High-current relay suited to winches, high-draw lighting, starter motor bypass circuits and other demanding switching applications exceeding the 40A rating of standard mini relays. 4-terminal configuration normally open only: No normally closed (87a) contact. Terminals are 85 (coil negative), 86 (coil positive), 30 (common) and 87 (normally open). If both NO and NC contacts are required, a change over relay is needed. 9.5mm blade terminals on pins 87 and 30: Larger terminal size to carry the 70A rated current through the power circuit. Ensure wiring uses connectors or lugs sized for 9.5mm blades on these pins. Coil terminals (85 and 86) use standard blade sizing. Resistor spike protection: Suppresses the voltage spike generated when the relay coil is de-energised, protecting ECU and control module outputs in the triggering circuit. IP67 sealed housing: Fully protected against dust and temporary water immersion, suited to underbonnet, exposed and marine-adjacent mounting positions. Silver tin oxide contacts: Reliable switching performance with excellent contact life at high current. Moulded mounting tab fixed: Mounting tab is integrated into the relay body rather than removable. Single unit: For individual installations or replacements. One year warranty: Covered by a one year OEX warranty. Technical specs Specification Detail SKU ACX1944RBL Brand OEX Type Mini Relay Voltage 12V Current Rating 70A Relay Action Normally Open Terminals 4 Blade Pin 87 and 30 Terminal Size 9.5mm Coil Terminal Size (85 and 86) Standard blade Spike Protection Resistor Contact Material Silver Tin Oxide IP Rating IP67 Mounting Moulded tab (fixed) Pack Quantity 1 Weight 0.04kg Warranty One year Sold As Single unit Frequently asked questions Why does this relay have 4 terminals instead of 5? Standard 5-pin mini relays include both a normally open (87) and a normally closed (87a) contact. The ACX1944RBL is a high-current normally open relay only the normally closed contact is omitted, resulting in 4 terminals: 85 (coil negative), 86 (coil positive), 30 (common) and 87 (normally open). If both NO and NC contacts are required, a change over relay is needed. Why are terminals 87 and 30 larger at 9.5mm? The 9.5mm blade terminals on pins 87 and 30 are sized to carry the 70A rated current through the power circuit. Standard 6.3mm blade terminals are not rated for this current level. Ensure wiring uses connectors or lugs sized for 9.5mm blades on these pins the coil terminals (85 and 86) use standard blade sizing. What is the difference between this and the 40A ACX1940RBL? The ACX1944RBL is rated at 70A and uses 4 terminals with larger 9.5mm power pins, suited to high-current applications like winches and high-draw accessories. The ACX1940RBL is rated at 40A, uses 5 terminals including 87a, and has standard-sized blade terminals throughout. Select the ACX1944RBL for loads exceeding 40A. What does resistor spike protection do? When a relay coil is de-energised it generates a voltage spike that can damage sensitive electronics. A resistor across the coil terminals suppresses this spike, providing protection for ECU and control module outputs used to trigger the relay. Is this relay suitable for underbonnet use? Yes. The IP67 sealed housing provides full protection against dust and temporary water immersion, making it suitable for underbonnet, exposed and marine-adjacent mounting positions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX DXA433M 12V 110A Denso Style Alternator Single Leg Mount AA Section Fixed Pulley IR11 CW Rotation New Unit The OEX DXA433M is a new 12V 110A alternator in the Denso style with a single leg mount, AA section fixed pulley and clockwise rotation. This unit has an active warning light circuit regulator. For vehicles with an inactive warning light circuit, use the adapter harness supplied with the alternator and refer to the instructions included. Confirm all mounting dimensions and pin code against your vehicle's existing alternator before ordering. 3-year passenger vehicle warranty, 1-year commercial warranty. Product overview The DXA433M is a 110A Denso-style single leg alternator with an AA section (dual V-groove) fixed pulley, suited to vehicles with twin V-belt drive systems. The fixed pulley means the pulley is not an overrunning alternator pulley (OAP) type. Clockwise rotation is confirmed for this unit. The IR11 pin code is shared with other OEX Denso alternators including the DXA4041 (also 110A, single leg, AA section, 76mm OD) and the DXA4036 (70A, single leg, 6-groove). This unit has an active warning light circuit regulator. If the vehicle uses an inactive warning light circuit, an adapter harness is supplied with the alternator. Read the instructions included with the unit before installation. Features and benefits New unit: Brand new, not remanufactured. 110A output: Suited to vehicles with moderate to elevated electrical demands. Active warning light circuit regulator: Suits vehicles with an active warning light circuit. For inactive warning light circuits, use the adapter harness supplied with the alternator. Refer to the instructions included. AA section fixed pulley, 76mm OD: Dual V-groove fixed pulley for twin V-belt drive systems. Not an overrunning alternator pulley type. Single leg mount, 165mm CTC, 58mm leg thickness: Confirm all mounting dimensions against the vehicle before ordering. Clockwise rotation: Confirm rotation direction suits your vehicle before ordering. 10mm pivot hole, M8x1.25 adjusting hole: Confirm hole sizes and thread specifications suit the vehicle's mounting points. IR11 pin code: Shared with other OEX Denso units. Confirm all dimensions against your vehicle. Non-insulated return: Earth return runs through the chassis. Confirm this suits your vehicle's wiring configuration. Internal regulator: Voltage regulation handled internally. 3-year passenger / 1-year commercial warranty: Extended warranty for passenger vehicle applications. Technical specs Specification Detail SKU DXA433M Brand OEX Voltage 12V Output 110A Style Denso Regulator Internal Mount Single leg Pulley Section AA (dual V-belt) Pulley Type Fixed Pulley OD 76mm Rotation Clockwise Mount CTC 165mm Leg Thickness 58mm Pivot Hole 10mm Adjusting Hole M8x1.25 Pin Code IR11 Warning Light Circuit Active (adapter harness supplied for inactive circuits) Insulated Return No Condition New Weight 6.5kg Warranty 3 years (passenger), 1 year (commercial) Frequently asked questions Is this a new or remanufactured unit? New. The DXA433M is a brand new unit, not remanufactured or rebuilt. What is the active warning light circuit and what do I do if my vehicle uses an inactive circuit? The warning light circuit refers to how the alternator communicates with the dashboard charge warning light. This unit has an active warning light circuit regulator. If your vehicle uses an inactive warning light circuit, an adapter harness is supplied with the alternator to accommodate this. Read the instructions included with the unit before installation. What is an AA section pulley? An AA section pulley has two V-grooves side by side for a twin V-belt drive system, as distinct from a single A section V-groove or a multi-groove serpentine pulley. Confirm your vehicle uses a twin V-belt drive system before ordering. What is the warranty on this alternator? 3 years for passenger vehicle applications, 1 year for commercial use. What should I confirm before ordering this alternator? Confirm mount type (single leg), CTC (165mm), leg thickness (58mm), pivot hole (10mm), adjusting hole (M8x1.25), pulley section (AA dual V-belt), pulley OD (76mm), rotation (clockwise) and pin code (IR11) all match your vehicle's requirements. Alternators are vehicle-specific, verify fitment before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX6535 Twin In-Line ANG/ANS Midi Fuse Holder with Cover 30–80A The OEX ACX6535 is a twin in-line midi fuse holder for ANG and ANS type midi fuses, rated for a current load of 30 to 80A. The housing is black nylon plastic with 100% copper connecting plates, 5mm bolts and coloured zinc plated screws and washers. Dimensions are 81mm x 41mm x 23mm. Supplied individually in a blister pack with a one-year warranty. Product overview The ACX6535 provides a twin in-line fusing solution for automotive, caravan and 4WD electrical installations where two circuits require midi fuse protection in a single compact holder. The 100% copper connecting plates ensure low-resistance current transfer across the full 30 to 80A operating range, and the protective cover keeps the fuse terminals shielded from moisture, dust and accidental contact. The black nylon plastic housing is lightweight at 0.01kg and compact at 81 x 41 x 23mm, suited to tight installation spaces. Coloured zinc plated screws and washers assist with assembly identification during installation, and the 5mm bolt terminals provide a secure, reliable mechanical connection. The ACX6535 accepts both ANG and ANS type midi fuses, covering a broad selection of common midi fuse amperages across the 30 to 80A range. Features and benefits Twin in-line midi fuse holder: Dual-circuit configuration allows two midi-fused circuits to be managed from a single compact holder, reducing wiring clutter in the installation. ANG and ANS midi fuse compatibility: Accepts both ANG and ANS type midi fuses across the 30 to 80A range, covering a broad range of common midi fuse amperages. 100% copper connecting plates: Full copper connecting plates provide low-resistance current transfer for consistent performance across the rated current load. 5mm bolt terminals: Secure mechanical bolt connections resist loosening from vibration, maintaining reliable circuit continuity. Coloured zinc plated screws and washers: Colour-coded hardware assists with installation identification and the zinc plating provides corrosion resistance. Protective cover included: The cover shields fuse terminals from moisture, dust and accidental contact, extending service life in demanding environments. Black nylon plastic housing: Lightweight and compact housing at 81 x 41 x 23mm, suited to tight installation spaces. One year warranty: Covered by a one-year OEX warranty. Technical specs Specification Detail SKU ACX6535 Brand OEX Type Twin In-Line Midi Fuse Holder Fuse Type ANG/ANS Midi Current Load 30–80A Housing Material Black nylon plastic Connecting Plates 100% copper Terminal Bolts 5mm Hardware Coloured zinc plated screws and washers Dimensions 81mm x 41mm x 23mm Weight 0.01kg Pack Quantity 1 Warranty One year Sold As Each Frequently asked questions What fuse types does the ACX6535 accept? The ACX6535 accepts ANG and ANS type midi fuses within the 30 to 80A current load range. Confirm the amperage rating of your chosen midi fuses suits your circuit requirements before installing. How many circuits does the ACX6535 protect? The ACX6535 is a twin holder protecting two separate circuits, one fuse per circuit. For single-circuit applications, a single in-line midi fuse holder may be more appropriate. Is the ACX6535 supplied with fuses? No. The ACX6535 is a fuse holder only. Compatible ANG or ANS midi fuses must be purchased separately. Contact us for compatible fuse options. What are the dimensions of the ACX6535? The ACX6535 measures 81mm x 41mm x 23mm, making it compact enough for installation in confined spaces such as under-seat or engine bay locations. Is the ACX6535 suitable for outdoor or marine use? The protective cover and zinc plated hardware provide basic protection against moisture and dust. However, the source data does not confirm an IP rating for the ACX6535. Contact us for further information if the installation environment involves heavy moisture or salt air exposure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0707 Australian Made 3mm Single Core Automotive Cable Orange 30m Roll OFHC Copper 10A V90 The OEX ACX0707 is a 3mm single core automotive cable in orange, supplied on a 30m roll. Manufactured in Australia from 99.99% oxygen free high conductivity (OFHC) copper, it features a 1.13mm² conductor cross-section and a 10A continuous rating at 30°C, suited to higher-current accessory circuits, lighting runs and general automotive wiring. The orange PVC insulation is UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Product overview The ACX0707 is the orange 30m variant in the OEX 3mm single core automotive cable range, sharing the same conductor specification and insulation rating as the other colours in the range. Orange cable is used in automotive and trailer wiring as an additional circuit colour for complex multi-wire harness builds and trailer looms where primary and secondary colours are already allocated, providing further differentiation in installations where a broad colour palette is needed to clearly identify each circuit. At 1.13mm² (17AWG) with a 10A continuous rating, the ACX0707 handles higher-current circuits where the 2mm 5A-rated cable would be undersized. The 16-strand conductor construction provides flexibility for routing through tight spaces and around bends. The UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. The 30m roll suits workshop jobs and multi-circuit installations without the bulk of a full-length trade roll. Features and benefits 99.99% OFHC copper conductor: Oxygen free high conductivity copper minimises resistance and signal loss across the cable run, maintaining reliable electrical performance in automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. Orange colour coding: Orange provides an additional circuit colour for complex multi-wire harness builds and trailer looms where primary and secondary colours are already allocated, supporting clear circuit differentiation across all wires in the installation. 10A rated at 30°C: Higher current capacity than the 2mm range, suited to lighting circuits, relay feeds, switch wiring and higher-draw accessory circuits in 12V and 24V systems. UV stabilised PVC insulation: Resists degradation in sun-exposed and underbonnet environments. V90 temperature rating: PVC insulation rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 16-strand construction: The 16-strand conductor provides flexibility and resistance to fatigue during installation and in service. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. CAN bus compatible: Meets the signal integrity requirements for use in modern vehicle communication network environments. 30m roll: Workshop-friendly length for multi-circuit jobs without the bulk of a full-length trade roll. Technical specs Specification Detail SKU ACX0707 Brand OEX Cable Type Single Core Automotive Industry Known Size 3mm Conductor Cross Section 1.13mm² Gauge 17AWG Conductor Strands 16 Strand Diameter 0.32mm Conductor Material 99.99% OFHC Copper Amp Rating 10A at 30°C Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Cable Colour Orange Length 30m Weight 0.42kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 30m roll Frequently asked questions What is the difference between the 3mm and 2mm OEX automotive cable? The 3mm cable has a larger conductor cross-section (1.13mm² vs 0.5mm²), a higher amp rating (10A vs 5A at 30°C) and a higher voltage rating (110V vs 100V). It is suited to circuits drawing more current than the 2mm range can safely handle, including lighting circuits, relay feeds and higher-draw accessories. What is the amp rating for this cable? This cable is rated at 10A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. What does V90 mean? V90 is the Australian cable insulation classification indicating the PVC insulation is rated for continuous operation at up to 90°C. It is the standard specification for automotive-grade PVC insulated cable in Australia and confirms suitability for underbonnet and outdoor-exposed installation positions. What does AS/NZS 3808:2000 compliance mean? AS/NZS 3808:2000 is the Australian and New Zealand standard covering insulated conductors and cables for internal wiring of equipment. Compliance confirms the cable meets defined requirements for conductor construction, insulation properties and performance. Is this cable available in other colours or lengths? OEX produces single core automotive cable in a range of colours and roll lengths across both the 2mm and 3mm ranges. Contact us for available colour and length options to suit your specific wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX7210 Canbus Trailer Lights Adaptor with 5 Circuit Trailer Interface The OEX ACX7210 is a 5-circuit canbus trailer lights adaptor designed to allow trailer and caravan lighting to operate without placing additional load on the vehicle's existing light circuits. It prevents the dashboard warning lights and erratic external light behaviour that can occur on modern vehicles when a trailer is connected directly to the tail light circuit. Covered by a one-year warranty. Product overview Modern vehicles with canbus electrical systems are sensitive to changes in circuit load. When a trailer is connected directly to the tail light wiring, the additional current draw can register as a fault on the canbus network, triggering warning lights on the dash or causing the vehicle's external lights to flash unexpectedly. The ACX7210 solves this by acting as an isolation interface between the vehicle's light circuits and the trailer, taking the trailer load off the vehicle's electronic system entirely. The 5-circuit trailer interface handles the standard trailer lighting circuits through its own output stage, protecting the vehicle's canbus network from load interference. This makes the ACX7210 suited to modern European and Asian vehicles where canbus trailer lighting problems are most commonly encountered. Contact us with your vehicle details to confirm compatibility before purchasing. Features and benefits Canbus-compatible trailer light interface: Prevents dashboard warning lights and erratic external light behaviour caused by trailer load interference on canbus vehicle electrical systems. 5-circuit trailer interface: Covers the standard 5 trailer lighting circuits through an isolated output stage, separating the trailer electrical load from the vehicle's light circuits. Protects vehicle electronics: By taking the trailer load off the vehicle's existing light circuits, the ACX7210 prevents fault codes and erratic behaviour on sensitive canbus systems. Multiple voltage compatibility: Designed to operate across multiple voltage configurations to suit a range of towing vehicles. One year warranty: Covered by a one-year OEX warranty. Technical specs Specification Detail SKU ACX7210 Brand OEX Type Canbus Trailer Light Adaptor Circuits 5 Warranty One year Sold As Each Frequently asked questions Why do I get dashboard warning lights when I connect a trailer? Modern vehicles with canbus electrical systems detect changes in circuit load. When a trailer is connected directly to the tail light circuit, the additional current draw can trigger fault codes on the canbus network, causing warning lights to appear on the dash or external lights to flash. The ACX7210 isolates the trailer load from the vehicle's light circuits, preventing this interference. Is the ACX7210 compatible with my vehicle? The ACX7210 is designed for modern vehicles with canbus electrical systems where trailer connection causes dash warning lights or erratic light behaviour. Contact us with your vehicle make, model and year to confirm compatibility before purchasing. What connector format does the ACX7210 use? The specific input and output connector format for the ACX7210 is not detailed in the current product data. Contact us before purchasing to confirm the connector type suits your vehicle and trailer setup. How many trailer light circuits does the ACX7210 support? The ACX7210 supports 5 trailer lighting circuits through its interface, covering the standard trailer light functions. Does the ACX7210 replace the need for a dedicated tow bar wiring kit? The ACX7210 is a canbus protection adaptor rather than a complete tow bar wiring kit. Whether it replaces or supplements your existing tow bar wiring depends on your vehicle and trailer setup. Contact us for advice on the correct solution for your towing application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0811 Australian Made 6mm Twin Core Sheathed Automotive Cable Red and Black with Black Outer Sheath 30m Roll OFHC Copper 30A V90 The OEX ACX0811 is a 6mm twin core sheathed automotive cable supplied on a 30m roll. Red and black conductors are enclosed in a common black outer sheath, providing both polarity identification and an additional layer of mechanical and UV protection over a standard figure 8 configuration. At 30A per conductor, this is the highest-rated cable in the OEX sheathed twin core range. Each conductor has a 4.59mm² OFHC copper cross-section with 65-strand construction for flexibility despite the large gauge. The PVC insulation and sheath are UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Covered by a one year warranty. Product overview The ACX0811 is the 6mm variant in the OEX twin core sheathed automotive cable range, stepping up significantly from the 4mm ACX0808 with a larger 4.59mm² conductor cross-section and a 30A continuous rating per conductor. This rating makes the ACX0811 suited to demanding two-wire applications where both positive and negative need to travel together with mechanical and UV protection, including winch and recovery equipment power and return feeds, dual battery and auxiliary battery wiring runs, high-current relay and accessory circuits, and trailer and caravan main supply feeds. The common black outer sheath encloses both conductors and provides protection against abrasion, UV and moisture in exposed installations. The 65-strand construction provides excellent flexibility for routing through tight spaces and around bends despite the larger 6mm gauge, with significantly more strands than the 26-strand 4mm cable. The UV stabilised V90 PVC insulation and sheath handle continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. The 30m roll suits workshop jobs and demanding single-vehicle installations without the bulk of a full-length trade roll. Features and benefits Sheathed twin core construction: Red and black conductors enclosed in a black outer sheath for added mechanical and UV protection and a cleaner finished appearance, suited to exposed runs and locations requiring extra abrasion or weather resistance. Red and black conductors: Conventional polarity colouring for straightforward positive and negative identification without additional marking or tape. OFHC copper conductors: Oxygen free high conductivity copper minimises resistance across the cable run, maintaining reliable electrical performance in high-current automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. 30A rated at 30°C per conductor: The highest rating in the OEX sheathed twin core range, suited to winch feeds, dual battery runs, high-current relay circuits and heavy accessory wiring in 12V and 24V systems drawing up to 30A per conductor. Current carrying capacity reduces at higher ambient temperatures. UV stabilised PVC insulation and sheath: Resists degradation in sun-exposed and outdoor environments, extending the service life of the cable in exposed installation positions. V90 temperature rating (90°C): Insulation and sheath rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 65-strand construction: The 65-strand conductor provides excellent flexibility and resistance to fatigue during installation and in service, maintaining good routing flexibility despite the larger 6mm cable gauge. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 30m roll: Workshop-friendly length for multi-circuit jobs and demanding single-vehicle installations without the bulk of a full-length trade roll. Technical specs Specification Detail SKU ACX0811 Brand OEX Cable Type Twin Core, Sheathed Industry Known Size 6mm Conductor Cross Section 4.59mm² per conductor Gauge 11AWG Conductor Strands 65 Strand Diameter 0.3mm Conductor Material OFHC Copper Amp Rating 30A at 30°C per conductor Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Conductor Colours Red and black Sheath Colour Black Length 30m Weight 3.77kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 30m roll Frequently asked questions What is the difference between sheathed twin core and figure 8 twin core cable? A sheathed twin core cable encloses two separately insulated conductors inside a common outer sheath, providing an additional layer of mechanical and UV protection. A figure 8 cable bonds two conductors side by side without a separate outer sheath. Sheathed cable is better suited to exposed runs and locations requiring extra abrasion or weather resistance. How does the ACX0811 compare to the ACX0808 and ACX0806? All three are twin core sheathed cables with the same construction and sheath colour. The ACX0806 uses 3mm conductors at 1.13mm² and 10A per conductor. The ACX0808 uses 4mm conductors at 1.84mm² and 15A per conductor. The ACX0811 uses 6mm conductors at 4.59mm² and 30A per conductor, suited to the highest-current two-wire applications including winch feeds and dual battery runs. How do I tell which conductor is positive and which is negative? The red conductor is positive and the black conductor is negative or return, following standard automotive wiring colour convention. What is the amp rating per conductor? Each conductor is rated at 30A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. Is this cable available in other sizes or lengths? OEX produces twin core sheathed and figure 8 cable in a range of sizes and roll lengths. Contact us for available size and length options to suit your wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX DXA557 12V 130A Denso Style Alternator Twin Leg Mount 7-Groove 52mm Pulley IR115 New Unit The OEX DXA557 is a new 12V 130A alternator in the Denso style with a twin leg mount and 7-groove pulley. Confirm all mounting dimensions and pin code against your vehicle's existing alternator before ordering. 3-year passenger vehicle warranty, 1-year commercial warranty. Product overview The DXA557 is a high-output 130A Denso-style twin leg alternator. The IR115 pin code is shared with several other OEX Denso units. The DXA557 is differentiated by its twin leg mount with 178mm CTC and 31mm inside leg notably the longest CTC and shortest inside leg of any twin leg unit in the OEX Denso range covered in this session. Always confirm all dimensions against your vehicle rather than relying on pin code alone. Features and benefits New unit: Brand new, not remanufactured. 130A output: High-output alternator for vehicles with elevated electrical demands. Twin leg mount, 178mm CTC, 31mm inside leg: Confirm all mounting dimensions against the vehicle before ordering. 7-groove 52mm OD pulley: 7-groove multi-rib pulley for serpentine belt drive systems. M10x1.25/11mm pivot hole, 11mm adjusting hole: Confirm hole sizes and thread specifications suit the vehicle's mounting points. IR115 pin code: Shared with several other OEX Denso units. Confirm all dimensions against your vehicle. Internal regulator: Voltage regulation handled internally. 3-year passenger / 1-year commercial warranty: Extended warranty for passenger vehicle applications. Technical specs Specification Detail SKU DXA557 Brand OEX Voltage 12V Output 130A Style Denso Regulator Internal Mount Twin leg Pulley Section 7-groove Pulley OD 52mm Mount CTC 178mm Inside Leg 31mm Pivot Hole M10x1.25/11mm Adjusting Hole 11mm Pin Code IR115 Condition New Weight 5.68kg Warranty 3 years (passenger), 1 year (commercial) Frequently asked questions Is this a new or remanufactured unit? New. The DXA557 is a brand new unit, not remanufactured or rebuilt. The IR115 pin code appears on several other OEX units, how do I confirm this is the right one? The IR115 pin code is shared across several OEX Denso alternators. The DXA557 is a twin leg unit with 178mm CTC and 31mm inside leg confirm both of these dimensions along with pulley section (7-groove), pulley OD (52mm) and all other specifications against your vehicle's existing alternator before ordering. What is the warranty on this alternator? 3 years for passenger vehicle applications, 1 year for commercial use. What vehicles does this alternator suit? Contact us with your vehicle details to confirm fitment before ordering. What should I confirm before ordering this alternator? Confirm mount type (twin leg), CTC (178mm), inside leg (31mm), pivot hole (M10x1.25/11mm), adjusting hole (11mm), pulley section (7-groove), pulley OD (52mm) and pin code (IR115) all match your vehicle's requirements. Alternators are vehicle-specific, verify fitment before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX DXA4056 12V 85A Denso Style Alternator Single Leg Mount 7-Groove 58mm Pulley IR115 New Unit The OEX DXA4056 is a new 12V 85A alternator in the Denso style with a single leg mount and 7-groove pulley. Confirm all mounting dimensions and pin code against your vehicle's existing alternator before ordering. Note the IR115 pin code is shared with several other OEX Denso units - always confirm all dimensions and mount type. If upgrading from this 85A unit to a 130A or 160A alternator, the supplier recommends upgrading the battery cable and fuse between the alternator and battery to suit the higher output. 3-year passenger vehicle warranty, 1-year commercial warranty. Product overview The DXA4056 is an 85A Denso-style single leg alternator for vehicles with standard electrical demands. The IR115 pin code is shared across several OEX Denso units - confirm mount type, CTC, leg thickness, pulley section and all other dimensions against your vehicle's existing alternator, not just the pin code. If the application requires a higher output and the 85A unit is being replaced with a 130A (DXA4006 quad leg, or DXA4000 twin leg) or 160A (DXA4034) unit, the battery cable and fuse between the alternator and battery should be upgraded to handle the increased current. This is a supplier recommendation - consult a qualified auto electrician if unsure. Features and benefits New unit: Brand new - not remanufactured. 85A output: Standard output for vehicles with moderate electrical demands. Single leg mount, 163mm CTC, 58mm leg thickness: Confirm all mounting dimensions against the vehicle before ordering. 7-groove 58mm OD pulley: 7-groove multi-rib pulley for serpentine belt drive systems. 10mm pivot hole, M8x1.25 adjusting hole: Confirm hole sizes and thread specifications suit the vehicle's mounting points. IR115 pin code: Shared with several other OEX Denso units. Confirm all dimensions - pin code alone is not sufficient to confirm fitment. Upgrade note: If replacing with a 130A or 160A unit, upgrade the battery cable and fuse between alternator and battery accordingly. Internal regulator: Voltage regulation handled internally. 3-year passenger / 1-year commercial warranty: Extended warranty for passenger vehicle applications. Technical specs Specification Detail SKU DXA4056 Brand OEX Voltage 12V Output 85A Style Denso Regulator Internal Mount Single leg Pulley Section 7-groove Pulley OD 58mm Mount CTC 163mm Leg Thickness 58mm Pivot Hole 10mm Adjusting Hole M8x1.25 Pin Code IR115 Condition New Weight 4.5kg Warranty 3 years (passenger), 1 year (commercial) Frequently asked questions Is this a new or remanufactured unit? New. The DXA4056 is a brand new unit, not remanufactured or rebuilt. If I upgrade to a 130A or 160A unit, do I need to change anything else? Yes. The supplier recommends upgrading the battery cable and fuse between the alternator and battery when upgrading from an 85A unit to a 130A or 160A unit. The existing cable and fuse may not be rated for the higher output current. Consult a qualified auto electrician to confirm the correct cable gauge and fuse rating for the upgraded output. The IR115 pin code appears on other OEX units - how do I confirm this is the right one? The IR115 pin code is shared across several OEX Denso alternator units. This DXA4056 is a single leg unit with 163mm CTC, 58mm leg thickness and a 7-groove 58mm OD pulley. Confirm all of these dimensions against your vehicle's existing alternator - pin code alone is not sufficient to confirm fitment. What is the warranty on this alternator? 3 years for passenger vehicle applications, 1 year for commercial use. What should I confirm before ordering this alternator? Confirm mount type (single leg), CTC (163mm), leg thickness (58mm), pivot hole (10mm), adjusting hole (M8x1.25), pulley section (7-groove), pulley OD (58mm) and pin code (IR115) all match your vehicle's requirements. Alternators are vehicle-specific - verify fitment before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX DXA4006 12V 130A Denso Style Alternator Quad Leg Mount 7-Groove 53mm Pulley S Terminal IR115 New Unit The OEX DXA4006 is a new 12V 130A alternator in the Denso style with a quad leg mount and S terminal in the regulator plug. Two important pre-purchase checks: if your vehicle requires an RLO terminal, use the DXA597 instead; if a 150A unit is required, use the DXA4076 instead. The ACX6250 test unit may confirm your vehicle's terminal configuration before ordering. Confirm amperage and terminal type before purchasing. 3-year passenger vehicle warranty, 1-year commercial warranty. Product overview The DXA4006 is a new Denso-style 130A quad leg alternator with an S terminal regulator plug. The IR115 pin code is shared with several other alternator units - always confirm all mounting dimensions and terminal type against your vehicle's requirements before ordering, not just the pin code. Two supplier-specified checks are required before ordering. First, the S terminal and RLO terminal are different regulator plug configurations - if your vehicle requires an RLO terminal, the DXA597 is the correct unit. The ACX6250 test unit can confirm your vehicle's circuit configuration if unclear. Second, the supplier recommends the fitter confirm the correct amperage - if a 150A unit is required, the DXA4076 is the correct alternative. Also note that the DXA4006 and DXA4000 both carry the IR115 pin code: the DXA4000 is a twin leg unit (168mm CTC, 43mm inside leg, Sense terminal) while the DXA4006 is a quad leg unit (175mm CTC, 36mm inside leg, S terminal) - the two are not interchangeable. Features and benefits New unit: Brand new - not remanufactured or rebuilt. 130A output: High-output quad leg alternator. Confirm correct amperage - for 150A use the DXA4076. S terminal regulator plug: Suits vehicles requiring an S terminal configuration. For RLO terminal vehicles, use the DXA597. IR115 pin code: Shared with several other units including the DXA4000. Always confirm all mounting dimensions and terminal type - pin code alone is not sufficient to confirm fitment. Quad leg mount, 175mm CTC, 36mm inside leg: Confirm all mounting dimensions against the vehicle before ordering. 7-groove 53mm OD pulley: Standard groove configuration for this Denso-style fitment. M10x1.25/10mm pivot hole, M8x1.25 adjusting hole: Confirm hole sizes and thread specifications suit the vehicle's mounting points. 3-year passenger / 1-year commercial warranty: Extended warranty for passenger vehicle applications. Technical specs Specification Detail SKU DXA4006 Brand OEX Voltage 12V Output 130A Style Denso Regulator Internal Mount Quad leg Pulley Section 7-groove Pulley OD 53mm Mount CTC 175mm Inside Leg 36mm Pivot Hole M10x1.25/10mm Adjusting Hole M8x1.25 Pin Code IR115 Terminal S terminal Condition New Weight 5.74kg Warranty 3 years (passenger), 1 year (commercial) Frequently asked questions Is this a new or remanufactured unit? New. The DXA4006 is a brand new unit, not remanufactured or rebuilt. What is the difference between the S terminal and RLO terminal? These are different regulator plug configurations. The DXA4006 has an S terminal. If your vehicle requires an RLO terminal, use the DXA597. The ACX6250 test unit can be used to confirm your vehicle's circuit configuration if the terminal type is unclear. How do I know if I need 130A or 150A? The supplier recommends the fitter confirm the correct amperage rating for the application. If a 150A unit is required, use the DXA4076 rather than the DXA4006. How does the DXA4006 differ from the DXA4000 - both are 130A IR115? Both are 130A IR115 internal regulator units but they use different mounts and terminals. The DXA4006 is a quad leg unit with 175mm CTC, 36mm inside leg and S terminal. The DXA4000 is a twin leg unit with 168mm CTC, 43mm inside leg and Sense terminal. Always confirm mount type, all dimensions and terminal type - the two are not interchangeable. What should I confirm before ordering this alternator? Confirm the mount type (quad leg), CTC (175mm), inside leg (36mm), pivot hole (M10x1.25/10mm), adjusting hole (M8x1.25), pulley section (7-groove), pulley OD (53mm), pin code (IR115), terminal type (S terminal) and amperage (130A) all match your vehicle's requirements. Alternators are vehicle-specific - verify fitment before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less