Front & Rear Dual Driving Recorder!Features: 2K Front Camera 1080P Rear Camera In-Built GPS & WiFi Loop Recording 3D G-Sensor, Super Capacitor 3M Mount Free Hema Dashcam App Includes Hardwire Kit Legendary Products & Support From Authorized Dealers When you choose HEMA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized HEMA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by HEMA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized HEMA dealer today!

Read more less

Hyundai/Kia Radio Replacement InterfaceMake installation of your new aftermarket radio or infotainment system easy in select Hyundai and KIA vehicles with the Plug & Play ConnectPRO Audi radio replacement solution from Stinger Australia.The Radio Replacement Solution, There's nothing worse than losing your steering wheel control buttons when updating to the latest technology. The SWI-HY01 from ConnectPRO from Stinger Australia allows easy retention of steering wheel audio control buttons with your new aftermarket radio or infotainment system. Keep your eyes on the road and less time fumbling for the radio with ConnectPRO.The Solid Connection, Each ConnectPRO radio replacement solution includes a Plug-and-play interface for an easy and solid connection to your existing vehicle harness.No need to strip back wires or chop off connectors in your vehicle allowing re-installation of your factory radio if ever required.Features: Retains factory-fitted steering wheel audio buttons Retains factory reverse camera (SEE NOTES) Suitable for vehicles with 24PIN & 18PIN Hyundai / Kia Radio Connector Compatibility Notes: Phone buttons cannot be retained in all vehicle models (if fitted) Reverse cameras can only be retained if wiring is found in 24+18 connectors. Vehicles with external camera connectors require additional products. 2008-2010 Hyundai iLoad – Models in this year's range may only have the 24-pin connector. If so the interface will need to be hardwired to the vehicle. 2016-2019 Hyundai Veloster – Suits models with OE Carplay Headunit only (without CD mechanism) 2017-Up Kia Soul – This model may use a different vehicle connector, confirm connector type before ordering. Designed for use with major branded head units including Alpine, Clarion, Kenwood, JVC, Pioneer, Sony, Stinger plus more What's in the Box: PAC SWI-RC-1 Interface (See more on the SWI-RC-1 here) 24 & 18 PIN Hyundai & KIA Vehicle Plug and Play Harness Bare wire SWI-RC-1 Harness Instruction Manual Legendary Products & Support From Authorized Dealers When you choose ConnectPRO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ConnectPRO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ConnectPRO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ConnectPRO dealer today!

Read more less

Equipped With Parking Lines For Extra Security & Guidance While Reversing! Universal Lip Mount CameraThis versatile vehicle blind spot backup camera can be mounted in lip, tailgate, or van door locations. Equipped with parking lines for extra security and guidance while reversing. Backup Camera Mounting OptionsPCAM-110 can be lip mounted as a reverse facing camera on a horizontal surface. The image control wires allow the installer to select the appropriate view of the camera for mounting the camera on a vertical surface facing down. Backup Camera Mounting OptionsGain a clear view of your surroundings with this versatile backup camera that can be lip, van door or tailgate mounted. Engineered to withstand whatever your vehicle encounters on the road. Durable, water resistant, ¼” CMOS and simple to install. Mounted on a lip, van door or tailgate, it provides a clear, consistent view of your surroundings. Great For Factory & Aftermarket SystemsWith its universal RCA connection featuring an NTSC signal, the PCAM-CT01 can be used with most aftermarket headunits featuring an RCA video input. Do you want to use it on your factory infotainment system? The PCAM-110 is compatible with our wide range of camera input adaptors available. Built-To-LastThe PCAM-CT01 is designed to meet IP67 Water/Debris standards so unlike cheap quality cameras, this high-quality camera will last the day-to-day use. Specifications: Operating Voltage: 12V Camera Size: 1/4" CMOS Voltage Range: 9 ~16V Resolution: 648 x 488 Operating Temperature: -20C ~ 70C Output: CVBS (RCA Connector) Colour: Black Viewing Angle: 170° LED Count: No (Non-IR LED Type) Video System: NTSC IP Rating: IP67 Include Mounting Brackets: No (Flush Mount) Dimensions: (D) 30mm x (W) 30mm x (H) 74mm Weight: 0.23kg Kit Contents:Echomaster PCAM-110-N Kit Includes: Vehicle Camera Camera Harness Mounting Hardware Screws Legendary Products & Support From Authorized Dealers When you choose ECHOMASTER, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ECHOMASTER dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ECHOMASTER's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ECHOMASTER dealer today!

Read more less

One Block, Limitless Configurations The Stinger X-LINK Fused Distribution Block That Grows With Your System Product Overview The Stinger XFDB108 is a linkable fused distribution block from the X-LINK system, designed to provide maximum power management flexibility for car audio, 4WD accessory, and air suspension installations. Starting as a single inline fuse holder, the XFDB108 can be expanded by clicking additional X-LINK blocks together using the included Power Link couplers building up to a multi-circuit fused or unfused distribution block or full buss bar without additional wiring complexity. Accepts cable from 0 gauge through to 8 gauge via included cable adaptors, and is compatible with both ANL and MIDI (Mini ANL) fuses. The custom brass Power Link couplers and gold-finish machined terminals maximise current transfer while the XFASTEN hardware system provides a firm, solid grip on cables. Note: no fuse is included fuses are available separately. Power Link couplers are not fuses. Key Specifications Manufacturer Part Number: XFDB108 Cable input/output sizes: 0 gauge, 4 gauge, 8 gauge Fuse types accepted: ANL, MIDI (Mini ANL) Linkable: Yes — click together with additional X-LINK blocks Terminal finish: Gold Coupler material: Custom brass XFASTEN hardware: Yes Fuse included: No — available separately Power Links included: 1x MIDI (Mini ANL) sized, 1x ANL sized Configurations possible: Inline fuse holder, fused distribution block, non-fused distribution block, power and ground distribution Features & Benefits Modular Linkable Design — The XFDB108 starts as a single inline fuse holder and expands into a multi-circuit distribution block by clicking additional X-LINK blocks together. No rewiring needed — just click and connect. 0 to 8 Gauge Cable Flexibility — Accepts 0, 4, and 8 gauge cable via included adaptors on both input and output terminals, covering the full range from main power feeds to accessory runs. ANL and MIDI Fuse Compatibility — Accepts both ANL (full size) and MIDI/Mini ANL fuses, giving compatibility with the most common high-current fuse types used in car audio and 4WD builds. Custom Brass Power Link Couplers — The brass Power Link couplers provide a high-conductivity, low-resistance link between X-LINK blocks for maximum current transfer when multiple blocks are connected. XFASTEN Hardware System — A dedicated hardware system that firmly grips cables at the terminal, maintaining a solid, vibration-resistant connection without relying solely on the terminal screw. Gold Finish Terminals — Custom machined gold-finish terminals reduce contact resistance for clean, high-current power transfer at every connection point. Versatile Application — Suitable as power and ground distribution for amplifier installs, 4x4 accessory builds, air suspension systems, and any application requiring expandable high-current distribution. Technical Specs Specification Detail Part Number XFDB108 Brand Stinger Cable Sizes 0 gauge, 4 gauge, 8 gauge Fuse Types ANL, MIDI (Mini ANL) Terminal Finish Gold Coupler Material Custom brass XFASTEN Hardware Yes Linkable Yes — via Power Link couplers Fuse Included No — available separately Power Links Included 1x MIDI/Mini ANL, 1x ANL Configurations Inline fuse holder, fused distribution, non-fused distribution, power/ground distribution Included 1x X-LINK block, 1x MIDI Power Link, 1x ANL Power Link Compatible With / Goes Well With Car audio amplifier power and ground distribution 4WD and off-road accessory power distribution Air suspension system power and ground runs Any high-current DC power distribution application ANL and MIDI (Mini ANL) fuses (sold separately) Additional Stinger X-LINK blocks for expanded distribution (sold separately) Caution: No fuse is included with the XFDB108 fuses must be sourced separately. Power Link couplers are NOT fuses and do not provide overcurrent protection. When using the XFDB108 in a fused configuration, always install an appropriate-rated fuse for the connected circuit. Frequently Asked Questions Does the XFDB108 come with a fuse? No — no fuse is included. The XFDB108 accepts ANL and MIDI (Mini ANL) fuses, which are available separately. The Power Link couplers included in the box are not fuses and do not provide overcurrent protection. What cable sizes does the XFDB108 accept? The XFDB108 accepts 0 gauge, 4 gauge, and 8 gauge cable via the included cable adaptors on both input and output terminals. Can I connect multiple X-LINK blocks together? Yes — additional X-LINK blocks can be clicked together using the brass Power Link couplers to create an expanded distribution block or buss bar. Adding further X-LINK blocks (sold separately) increases the number of circuits without additional complexity. What fuse types does the XFDB108 accept? The XFDB108 accepts ANL (full size) and MIDI/Mini ANL fuses — the two most common high-current fuse formats used in car audio and 12V accessory installations. What are the Power Links included in the box? The XFDB108 includes one MIDI/Mini ANL sized Power Link and one ANL sized Power Link. These are brass couplers used to link X-LINK blocks together — they are not fuses and do not provide overcurrent protection. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Single or Double DIN Fitment Across Three Volvo Models S60, V70 and XC70 Product Overview The Stinger SFMVL01 is a multi-DIN radio fascia kit designed for installing either a single DIN or double DIN aftermarket head unit into compatible Volvo S60, V70, and XC70 models. A single part number covers the Volvo S60 1st Generation (2001–2009), Volvo V70 2nd Generation (2004–2007), and Volvo XC70 2nd Generation (2003–2007), making it a practical choice for Volvo owners across these three popular models. This is a fascia kit only head unit, wiring harness, mounting brackets, and antenna adaptor are not included and must be sourced separately. Key Specifications Manufacturer Part Number: SFMVL01 Vehicle compatibility: Volvo S60 1st Gen 2001–2009; Volvo V70 2nd Gen 2004–2007; Volvo XC70 2nd Gen 2003–2007 Head unit size: Single DIN or Double DIN Colour: Not specified Mounting brackets: Not specified Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Covers S60, V70 and XC70 — A single fascia kit confirmed for three Volvo models across their respective production windows, covering a broad range of Volvo owners without needing separate part numbers. Single and Double DIN Compatible — Accommodates both single DIN and double DIN aftermarket head units in these Volvo models' factory dash openings. No Dash Modification Required — Designed to fit the factory dash openings directly without cutting or permanently modifying the factory panels. Technical Specs Specification Detail Part Number SFMVL01 Brand Stinger Colour Not specified Head Unit Size Single DIN or Double DIN Volvo S60 Compatibility 1st Generation 2001–2009 Volvo V70 Compatibility 2nd Generation 2004–2007 Volvo XC70 Compatibility 2nd Generation 2003–2007 Mounting Brackets Not specified Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Volvo S60 1st Generation 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Volvo V70 2nd Generation 2004, 2005, 2006, 2007 Volvo XC70 2nd Generation 2003, 2004, 2005, 2006, 2007 Single DIN and double DIN aftermarket head units Frequently Asked Questions Does the SFMVL01 include a wiring harness or mounting brackets? No — the SFMVL01 is a fascia kit only. The head unit, wiring harness, mounting brackets, and antenna adaptor must be sourced separately for a complete installation. Which Volvo models does this kit cover? The SFMVL01 covers the Volvo S60 1st Generation (2001–2009), Volvo V70 2nd Generation (2004–2007), and Volvo XC70 2nd Generation (2003–2007). Confirm your vehicle's generation and year before purchase. Can this fascia accept both single DIN and double DIN head units? Yes — the SFMVL01 accommodates both single DIN and double DIN aftermarket head units across all three compatible Volvo models. What colour is the SFMVL01 fascia? Colour is not specified in the supplier data. Confirm with the supplier before purchase if colour matching is a requirement. Will this fascia require any modification to the factory dash? No — the SFMVL01 is designed to fit the S60, V70, and XC70 factory dash openings without cutting or permanently modifying the dash panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Double DIN Fitment for the Toyota Prado 150 Non-Nav LCD Screen Relocated, Black Fascia and Brackets Included Product Overview The Stinger SFDTY02 is a black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2009–2013 Toyota LandCruiser Prado 150 Series without factory navigation. This kit is not a standard drop-in fascia it relocates the factory small LCD screen from the top of the radio position to the bottom of the opening (where the OEM radio was located), while the aftermarket double DIN head unit occupies the top of the dash. Mounting brackets are included. This kit is confirmed for non-navigation Prado 150 models only navigation-equipped variants are not supported. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFDTY02 Vehicle compatibility: Toyota LandCruiser Prado 150 Series 2009–2013 — without factory navigation only Head unit size: Double DIN Colour: Black Mounting brackets: Included LCD screen relocation: Factory small LCD screen relocated from top to bottom of opening; head unit occupies top position Navigation models: Not compatible Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits LCD Screen Relocated — Head Unit to Top — Unlike standard fascia kits, the SFDTY02 moves the factory small LCD screen to the lower section of the dash opening, positioning the aftermarket double DIN head unit in the upper (more accessible) position. Mounting Brackets Included — All mounting brackets are supplied, providing the hardware needed to secure the head unit and LCD panel within the fascia. Black Finish — The black fascia integrates with the Prado 150's interior trim for a clean, factory-compatible appearance. Non-Navigation Prado 150 Specific — Designed specifically for the 150 Series Prado without factory navigation, where the upper LCD and lower radio layout makes a custom fascia solution necessary. No Dash Modification Required — Designed to fit the factory dash opening without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDTY02 Brand Stinger Colour Black Head Unit Size Double DIN Vehicle Compatibility Toyota LandCruiser Prado 150 Series 2009–2013 (non-nav only) Mounting Brackets Included LCD Screen Relocated from top to bottom of opening Head Unit Position Upper position in dash Navigation Models Not compatible Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Toyota LandCruiser Prado 150 Series 2009, 2010, 2011, 2012, 2013 — without factory navigation only Standard double DIN aftermarket head units Frequently Asked Questions Does this kit require the factory navigation system to be absent? Yes — the SFDTY02 is confirmed for Toyota LandCruiser Prado 150 Series models without factory navigation only. Navigation-equipped variants have a different dash layout and are not supported. Where does the factory LCD screen go after installation? The factory small LCD screen is relocated to the lower section of the dash opening, while the aftermarket double DIN head unit occupies the upper position. Does this kit include mounting brackets? Yes — mounting brackets are included with the SFDTY02, covering the hardware needed to secure both the head unit and the relocated LCD panel within the fascia. Does the SFDTY02 include a wiring harness or head unit? No — the SFDTY02 is a fascia and mounting bracket kit only. The head unit, wiring harness, and antenna adaptor must be sourced separately for a complete installation. What size head unit does this fascia suit? The SFDTY02 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Double DIN Fitment for Ford Focus and Mondeo Black Fascia, Mounting Brackets Included Product Overview The Stinger SFDFR05 is a black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the Ford Focus LV (2008–2011, including XR5) and Ford Mondeo MB/MC (2007–2014). It provides a black-finish surround that frames the new head unit within the factory dash opening, and includes mounting brackets for a complete fitment solution. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFDFR05 Vehicle compatibility: Ford Focus LV 2008–2011 (including XR5); Ford Mondeo MB/MC 2007–2014 Head unit size: Double DIN Colour: Black Mounting brackets: Included Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Double DIN Flush Fit Fascia — Purpose-built for the Ford Focus LV and Mondeo MB/MC dash openings, delivering a clean, professional surround for an aftermarket double DIN head unit without modification to the factory dash. Covers Focus XR5 — Compatibility includes the Ford Focus XR5 alongside the standard Focus LV, confirmed by the supplier. Mounting Brackets Included — Mounting brackets are supplied with the kit, providing the hardware needed to secure the head unit within the fascia and dash cavity. Black Finish — The black fascia panel blends with the Focus and Mondeo's interior trim for a tidy, factory-compatible appearance after the head unit swap. Covers Two Ford Models — A single part number suits both the Focus LV and the Mondeo MB/MC, covering a broad range of Ford owners across two popular models. Technical Specs Specification Detail Part Number SFDFR05 Brand Stinger Colour Black Head Unit Size Double DIN Ford Focus Compatibility LV series 2008–2011 (incl. XR5) Ford Mondeo Compatibility MB/MC series 2007–2014 Mounting Brackets Included Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Ford Focus LV 2008, 2009, 2010, 2011 (including XR5) Ford Mondeo MB 2007, 2008, 2009, 2010, 2011 Ford Mondeo MC 2010, 2011, 2012, 2013, 2014 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDFR05 include a head unit or wiring harness? No — the SFDFR05 is a fascia and mounting bracket kit. The head unit, wiring harness, and antenna adaptor are not included and will need to be sourced separately. Does the kit include mounting brackets? Yes — mounting brackets are included with the SFDFR05. Is the SFDFR05 compatible with the Ford Focus XR5? Yes — the supplier confirms compatibility includes the Ford Focus XR5 alongside the standard Focus LV (2008–2011). What size head unit does this fascia suit? The SFDFR05 is designed for standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Is this kit compatible with both the Ford Focus and Mondeo? Yes — the SFDFR05 is confirmed for the Ford Focus LV (2008–2011, including XR5) and the Ford Mondeo MB/MC (2007–2014). Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Two Functions, One Adaptor Retain Your Toyota's OEM Camera or Add an Aftermarket One via the 4-Pin Connector Product Overview The Stinger SCTYRT4 is a dual-function reverse camera adaptor for select Toyota vehicles fitted with a 4-pin Toyota camera connector at the factory radio. It serves two distinct installation scenarios: retaining the factory OEM reverse camera when replacing the head unit with an aftermarket infotainment system, or adding an aftermarket reverse camera to the existing factory radio without a head unit replacement. The SCTYRT4 is plug-and-play with the included vehicle harness. However, an important compatibility check is required before installation: some compatible Toyotas have a 6-volt factory camera while others have a 12-volt camera. The voltage must be confirmed by testing the OEM camera power wires before applying power to the harness applying incorrect voltage can damage the factory camera. Where a 6-volt camera is fitted, the Stinger ST5V voltage adaptor (sold separately) is required. Compatible vehicles include the Toyota 86 (pre and post-facelift), Camry XV30, Estima XR30/XR40, HiLux AN10/AN20/AN30, LandCruiser 200 Series (2008–2012), LandCruiser Prado 120 Series, and LandCruiser Prado 150 Series (without navigation). Key Specifications Manufacturer Part Number: SCTYRT4 Function: Retain OEM camera (aftermarket head unit) OR add aftermarket camera (factory head unit) Vehicle connector: 4-pin Toyota style Reverse camera retention: Yes — included with interface Plug & Play: Yes Camera voltage warning: Some vehicles have 12V cameras, others have 6V — test before applying power 6V camera requirement: ST5V voltage adaptor required (sold separately) Vehicle harness: Included Features & Benefits Dual Function — Retain or Add — The SCTYRT4 serves two use cases: replacing the factory head unit and retaining the OEM camera, or keeping the factory head unit and adding an aftermarket camera — both via the same 4-pin connector. 4-Pin Toyota Connector — Specifically engineered for Toyota vehicles using the 4-pin camera connector at the factory radio, providing a purpose-built connection without custom wiring. Vehicle Harness Included — The required vehicle harness is included, simplifying installation. Plug & Play — Connects directly to the factory 4-pin camera connector without cutting or splicing factory wiring. Technical Specs Specification Detail Part Number SCTYRT4 Brand Stinger Function Retain OEM camera or add aftermarket camera Vehicle Connector 4-pin Toyota style Reverse Camera Retention Yes — included with interface Plug & Play Yes Camera Voltage 12V or 6V depending on vehicle — test before use 6V Camera Adaptor ST5V required (sold separately) Vehicle Harness Included Compatible With / Goes Well With Toyota 86 2012–2017 (pre-facelift) Toyota 86 2017–2020 (post-facelift) Toyota Camry XV30 2002–2006 Toyota Estima XR30/XR40 2000–2005 Toyota HiLux AN10/AN20/AN30 2011–2013 Toyota LandCruiser 200 Series 2008–2012 Toyota LandCruiser Prado 120 Series 2002–2009 Toyota LandCruiser Prado 150 Series 2009–2013 — without factory navigation only Stinger ST5V voltage adaptor (sold separately — required for 6V factory camera vehicles) Caution: Some compatible Toyota vehicles have a 12-volt factory camera and others have a 6-volt factory camera. Always test the OEM camera power wires to confirm voltage BEFORE applying power to the harness. Applying incorrect voltage will damage the factory camera — Stinger is not liable for camera damage caused by incorrect voltage application. Where a 6-volt camera is confirmed, the Stinger ST5V voltage adaptor (sold separately) is required before installation. The LandCruiser Prado 150 Series is compatible with non-navigation models only. Frequently Asked Questions What are the two functions of the SCTYRT4? The SCTYRT4 can either retain the factory OEM reverse camera when replacing the head unit with an aftermarket infotainment system, or add an aftermarket reverse camera to the existing factory radio via the 4-pin Toyota connector. How do I know if my Toyota has a 6V or 12V factory camera? Test the OEM camera power wires with a multimeter before connecting the harness. Do not apply power without confirming the voltage — applying 12V to a 6V camera will damage it. If your vehicle has a 6V camera, the Stinger ST5V voltage adaptor (sold separately) is required. What happens if I apply the wrong voltage to the factory camera? Applying incorrect voltage to the factory camera will damage it. The supplier explicitly states that Stinger is not liable for camera damage caused by incorrect voltage application. Always confirm the camera voltage before use. Is the LandCruiser Prado 150 Series fully compatible? The 150 Series Prado is compatible for non-navigation models only (2009–2013). Navigation-equipped 150 Series Prado models are not supported. Is the vehicle harness included? Yes — a vehicle harness is included with the SCTYRT4. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Allows the Installation of An Aftermarket Double DIN Radio Into Your Vehicle Specifications: Include Mounting Brackets: Yes Colour: Black Finish Vehicle Compatibility: Subaru Liberty (Inc. Outback) 2018 - 2020 (BN-BS) Legendary Products & Support From Authorized Dealers When you choose Metra, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Metra dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Metra's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Metra dealer today!

Read more less

Stinger HRTY008 Plug & Play Radio Replacement Kit for Toyota Hilux 2015–2020 Upgrade your AN120/AN130 Hilux head unit with full SWC retention, USB carry-over, and advanced short/long press button mapping complete kit, ready to install. Product Overview The Stinger HRTY008 is a vehicle-specific radio replacement kit engineered for the Toyota Hilux AN120/AN130 series (2015–2020). It connects your new aftermarket head unit directly to the factory wiring via a plug-and-play ISO harness, with mounting brackets, antenna adaptor, and USB retention all included for a complete installation. The kit features Stinger's advanced SWC interface with dual-function button assignment (short press / long press), CAN Bus accessory output, and three configuration methods: PC via the Autoleads application, dip switch, or manual programming. A tri-colour LED provides real-time module status and memory is retained even if power is lost. Features & Benefits Plug & play — factory connector to standard ISO connector Retains steering wheel audio controls Dual-function SWC assignment — two radio functions per button (short press / long press) Configurable via PC (Autoleads app), dip switch, or manual programming Manual learning function for compatibility with unlisted analogue SWC vehicles Factory USB retention included Provides accessory output in CAN Bus vehicles Tri-colour LED status indicator Retains memory even if power is lost Updatable via Autoleads PC Application Antenna adaptor included Mounting brackets included Black finish Technical Specs Specification Detail SKU / Part Number HRTY008 Brand Stinger Colour / Finish Black Plug & Play Yes — Factory Connector to Standard ISO Connector Steering Wheel Control Retention Yes Dual-Function SWC Mapping Yes — Short Press / Long Press per button SWC Programming Options PC (Autoleads App), Dip Switch, Manual CAN Bus Accessory Output Yes USB Retention Yes AUX Retention No Reverse Camera Retention Not specified — confirm with F.A.E. Memory Retention (power loss) Yes Field Updatable Yes — via Autoleads PC Application Antenna Adaptor Included Yes Mounting Brackets Included Yes What's in the Box 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor, Antenna Adaptor, USB Retention Compatible With / Goes Well With Direct Vehicle Fit: Toyota Hilux 2015–2020 (AN120/AN130 Series) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Autoleads PC Application (for advanced SWC programming and firmware updates) Aftermarket reverse camera module (if reverse camera retention is required) Frequently Asked Questions Is USB retention included, and what about AUX? Yes, factory USB retention is included in the box. AUX retention is not included — an additional product would be required if AUX connectivity is needed. Can I assign multiple functions to one steering wheel button? Yes. The HRTY008 supports dual-function mapping, allowing two separate radio functions to be assigned to a single steering wheel button via short press and long press inputs. How do I configure or update the steering wheel control interface? The SWC interface supports three configuration methods: PC via the Autoleads application, dip switch settings, or manual programming on the module. Firmware updates are applied through the Autoleads PC Application. Does this kit retain the factory reverse camera? Reverse camera retention is not specified in the supplier data for the HRTY008. Contact the F.A.E. team to confirm before purchasing if reverse camera retention is required for your installation. Is this kit compatible with all 2015–2020 Toyota Hilux variants? The HRTY008 is specified for the Toyota Hilux AN120/AN130 series (2015–2020). For confirmation of compatibility with your specific variant or factory audio configuration, contact the F.A.E. team before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRTY007 Plug & Play Radio Replacement Kit for Toyota Hilux 2013–2015 Upgrade your Toyota Hilux head unit with full steering wheel control retention, reverse camera support, and advanced short/long press button mapping all in one kit. Product Overview The Stinger HRTY007 is a vehicle-specific radio replacement kit built for the Toyota Hilux AN10/AN20/AN30 series (2013–2015). It delivers a true plug-and-play installation via a factory connector to standard ISO connector harness, with mounting brackets and an antenna adaptor included for a complete install. The kit features Stinger's advanced SWC interface with dual-function button assignment (short press / long press), CAN Bus accessory output, and three configuration methods: PC via the Autoleads application, dip switch, or manual programming. Reverse camera retention is also supported provided the vehicle has reverse camera wiring present in the 28-pin plug. Please note: Reverse camera retention is only available on vehicles with reverse camera wiring in the 28-pin plug. If your Hilux does not have this wiring, reverse camera retention will not be possible with this kit. Features & Benefits Plug & play — factory connector to standard ISO connector Retains steering wheel audio controls (20-pin SWC connection) Dual-function SWC assignment — two radio functions per button (short press / long press) Configurable via PC (Autoleads app), dip switch, or manual programming Manual learning function for compatibility with unlisted analogue SWC vehicles Reverse camera retention — for vehicles with camera wiring in 28-pin plug only Provides accessory output in CAN Bus vehicles Tri-colour LED status indicator Retains memory even if power is lost Updatable via Autoleads PC Application Antenna adaptor included Mounting brackets included Black finish Technical Specs Specification Detail SKU / Part Number HRTY007 Brand Stinger Colour / Finish Black Plug & Play Yes — Factory Connector to Standard ISO Connector SWC Connection Type Toyota 20-Pin SWC Steering Wheel Control Retention Yes Dual-Function SWC Mapping Yes — Short Press / Long Press per button SWC Programming Options PC (Autoleads App), Dip Switch, Manual CAN Bus Accessory Output Yes Reverse Camera Retention Yes — 28-pin plug with camera wiring only Memory Retention (power loss) Yes Field Updatable Yes — via Autoleads PC Application Antenna Adaptor Included Yes Mounting Brackets Included Yes What's in the Box 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor, Antenna Adaptor Compatible With / Goes Well With Direct Vehicle Fit: Toyota Hilux 2013–2015 (AN10/AN20/AN30 Series) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Autoleads PC Application (for advanced SWC programming and firmware updates) Aftermarket reverse camera (if upgrading factory camera or adding new camera) Frequently Asked Questions Will this kit retain my factory reverse camera? Reverse camera retention is supported, but only on vehicles where reverse camera wiring is present in the 28-pin plug. If your Hilux does not have this wiring pre-installed, reverse camera retention will not be available with this kit. Can I assign multiple functions to one steering wheel button? Yes. The HRTY007 supports dual-function mapping, allowing two separate radio functions to be assigned to a single steering wheel button via short press and long press inputs. How do I configure or update the steering wheel control interface? The SWC interface supports three configuration methods: PC via the Autoleads application, dip switch settings, or manual programming on the module. Firmware updates are applied through the Autoleads PC Application. Is this kit compatible with all 2013–2015 Toyota Hilux variants? The HRTY007 is specified for the Toyota Hilux AN10/AN20/AN30 series (2013–2015). For confirmation of compatibility with your specific variant or factory audio configuration, contact the F.A.E. team before purchasing. Does this kit include an antenna adaptor and mounting brackets? Yes. Both an antenna adaptor and mounting brackets are included in the box alongside the 2DIN radio panel and steering wheel audio buttons adaptor. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger HRTY002 Plug & Play Radio Replacement Kit for Toyota Camry & Aurion XV40 Upgrade your Toyota Camry or Aurion head unit without losing a single steering wheel button dual-function short/long press mapping included. Product Overview The Stinger HRTY002 is a vehicle-specific radio replacement kit for the Toyota Camry XV40 (2007–2011) and Toyota Aurion XV40 (2006–2011), both equipped with a 20-pin steering wheel control connection. It delivers a true plug-and-play installation via a factory connector to standard ISO connector harness with no cutting or splicing required. The HRTY002 features the same advanced SWC interface found across Stinger's Toyota range supporting dual-function button assignment (short press / long press), CAN Bus accessory output, and three configuration methods: PC via the Autoleads application, dip switch, or manual programming. A tri-colour LED provides real-time module status, and memory is retained even if power is lost. Features & Benefits Plug & play — factory connector to standard ISO connector Retains steering wheel audio controls (20-pin SWC connection) Dual-function SWC assignment — two radio functions per button (short press / long press) Configurable via PC (Autoleads app), dip switch, or manual programming Manual learning function for compatibility with unlisted analogue SWC vehicles Provides accessory output in CAN Bus vehicles Tri-colour LED status indicator Retains memory even if power is lost Updatable via Autoleads PC Application Technical Specs Specification Detail SKU / Part Number HRTY002 Brand Stinger Colour / Finish Black Plug & Play Yes — Factory Connector to Standard ISO Connector SWC Connection Type Toyota 20-Pin SWC Steering Wheel Control Retention Yes Dual-Function SWC Mapping Yes — Short Press / Long Press per button SWC Programming Options PC (Autoleads App), Dip Switch, Manual CAN Bus Accessory Output Yes Memory Retention (power loss) Yes Field Updatable Yes — via Autoleads PC Application Antenna Adaptor Included Not specified — confirm with F.A.E. AUX / USB Retention Not specified — confirm with F.A.E. What's in the Box 2DIN Radio Panel, Steering Wheel Audio Buttons Adaptor Compatible With / Goes Well With Direct Vehicle Fit: Toyota Aurion 2006–2011 (XV40 Series) Toyota Camry 2007–2011 (XV40 Series) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Autoleads PC Application (for advanced SWC programming and firmware updates) Aftermarket reverse camera module (if reverse camera retention is required) Frequently Asked Questions Does this kit fit both the Toyota Camry and Aurion? Yes. The HRTY002 is compatible with both the Toyota Camry XV40 (2007–2011) and the Toyota Aurion XV40 (2006–2011), as both models share the same 20-pin SWC connection and factory wiring configuration. Can I assign multiple functions to one steering wheel button? Yes. The HRTY002 supports dual-function mapping, allowing two separate radio functions to be assigned to a single steering wheel button using short press and long press inputs. How do I configure or update the steering wheel control interface? The SWC interface supports three configuration methods: PC via the Autoleads application, dip switch settings, or manual programming directly on the module. Firmware updates are applied through the Autoleads PC Application. Does this kit work with CAN Bus vehicles? Yes. The HRTY002 provides an accessory output for CAN Bus vehicles, ensuring your aftermarket head unit receives the correct accessory trigger signal from the factory wiring. Is an antenna adaptor included with this kit? The supplier data does not confirm whether an antenna adaptor is included with the HRTY002. Contact the F.A.E. team to confirm before purchasing if an antenna adaptor is required for your installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less