Stinger BN25K11450 Double DIN Radio Fascia Kit for Hyundai Elantra MD/MD2 (2011–2013) A vehicle-specific double DIN radio fascia kit for the Hyundai Elantra MD/MD2 (2011–2013) black finish with mounting brackets included, retaining a neat factory dash appearance. Product Overview The Stinger BN25K11450 is a vehicle-specific double DIN radio fascia kit for the Hyundai Elantra MD and MD2 series (2011–2013). It provides the dash framework and mounting brackets required to install an aftermarket 2DIN head unit into the factory radio location while retaining a clean, factory-matched appearance. The black finish is matched to the Elantra MD/MD2 interior trim. Features & Benefits Vehicle-specific fit for Hyundai Elantra MD/MD2 2011–2013 Allows installation of aftermarket double DIN head units Retains neat, factory dash appearance Mounting brackets included Black finish matched to factory interior trim Technical Specs Specification Detail SKU / Part Number BN25K11450 Brand Stinger Colour / Finish Black Radio Size Compatibility Double DIN (2DIN) Mounting Brackets Included Yes Antenna Adaptor Included Not included Wiring Harness Included Not included SWC Interface Included Not included Compatible With / Goes Well With Direct Vehicle Fit: Hyundai Elantra 2011–2013 (MD/MD2) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC, Stinger) Vehicle-specific ISO wiring harness for Hyundai Elantra MD/MD2 Stinger STBAA40 / STBAA41 antenna adaptors (for Hyundai Elantra MD/MD2) Steering wheel control interface for Hyundai Elantra MD/MD2 (if applicable) Aftermarket reverse camera (if reverse camera functionality is required) Frequently Asked Questions Does this kit fit all Hyundai Elantra MD/MD2 variants from 2011–2013? The BN25K11450 is specified for the Hyundai Elantra MD and MD2 series (2011–2013). For confirmation of fitment across specific trim levels or variants, contact the F.A.E. team before purchasing. Is a wiring harness included? No. The BN25K11450 is a fascia and bracket kit only. A vehicle-specific ISO wiring harness will need to be sourced separately to connect your aftermarket head unit to the factory wiring. Does this kit include a steering wheel control interface? No. A SWC interface is not included. If you want to retain factory steering wheel audio controls, a compatible SWC adaptor will need to be purchased separately. Are mounting brackets included? Yes. The BN25K11450 includes mounting brackets for securing the aftermarket head unit in the factory dash opening. Is an antenna adaptor included? No. An antenna adaptor is not included. See the Stinger STBAA40 or STBAA41 for compatible Hyundai Elantra MD/MD2 antenna adaptors. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One of the Best Performing Subs You Can Find in Its Power Class!6" Power Tuned SubwooferThe 500 series is one of the best performing subs you can find in its power class. With a highly efficient design, the 500 series can easily be driven to high output levels on as little as 150-400 Watts. When compared to the 200 Series the 500 Series uses a longer coil, more powerful motor and the suspension is designed to handle higher transient peaks.These are very versatile subs that work well in sealed enclosures while providing the extra energy and control needed for vented enclosures applications. Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.Features: EROM Surround High-Temp, 2.0‚Äù, Voice Coil Double Layer Deep bass, high excursion spider system Unique glass fiber and natural pulp cone Back Plate Coil Gap Venting Extended Pole Piece Dd Stamped Steel Basket (508-512) DD Cast Basket (506) Specifications: Driver Size: 6 1/2" RMS: 150 – 400W Peak Power: 1200W VCD: 2 Impedance: D2 / D4 Piston Diameter: 5 3/8" Fs: – Hz 43.74 QMS: 4.907 QES: 0.558 QTS: 0.501 VAS: – Liters 4.395 Xmech: 56mm Xmax: 9mm Frame OD: 7" Frame OD With Gasket: 7 1/8" Mounting Diameter: 6" Mounting Depth: 4 ¬Ω" Motor Diameter: 5 ¬Ω" Motor Depth: 2" Woofer Displacement: 0.04 Cu Ft. Sealed Enclosure: 0.25 - 0.5 Cu Ft. Ported Enclosure: 0.25 - 0.75 Cu Ft. Shipping Weight: 4.76kg (10.5Lbs) Legendary Products & Support From Authorized Dealers When you choose DD Audio, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DD Audio dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DD Audio's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DD Audio dealer today!

Read more less

Stinger ST27AA01 Euro ISO Female to Male DIN Antenna Adaptor Converts the factory Euro ISO female antenna connector to a standard male DIN plug covers 65 vehicles across BMW, Ford, Holden, Mercedes, Fiat, Peugeot, Citroen, Smart, Porsche, and more from 1993 to 2019. Product Overview The Stinger ST27AA01 is a vehicle-specific antenna adaptor that converts the factory Euro ISO female antenna connector to a standard male DIN plug for aftermarket head units. This is a passive (non-amplified) adaptor for standard AM/FM antenna applications. Vehicle-specific installation note: BMW 3 Series E46 (1997–2005): The ST27AA01 suits 1997–2001 E46 models only. For 2002–2005 E46 models, use the ST27AA06 instead. Features & Benefits Converts Euro ISO female connector to standard male DIN plug High-quality conversion for reliable signal transfer Plug and play — no cutting or modification required Covers 65 vehicles across 16 brands from 1993–2019 Technical Specs Specification Detail SKU / Part Number ST27AA01 Brand Stinger Adaptor Type 1x Female Euro Connector to Male Standard DIN Connector Amplified No — passive adaptor Vehicle Notes BMW 3 Series E46: 1997–2001 models only (2002–2005 requires ST27AA06) Compatible With / Goes Well With Direct Vehicle Fit: Alfa Romeo GTV 2003–2006 (916) Alfa Romeo Spider 2003–2006 (916) BMW 3 Series (incl. M3) 1997–2005 (E46) — 1997–2001 models only BMW 5 Series (incl. M5) 1996–2003 (E39) BMW 7 Series 1994–2001 (E38) BMW Z3 1996–2002 (E36/E37/E38) Citroen C3 2002–2009 (1st Gen) Citroen C5 2001–2004 (DC/DE) Fiat 500 2008–2015 (Series 1–3) Fiat Ducato 2006–2012 (3rd Gen) Fiat Punto 2005–2013 (3rd Gen) Fiat Scudo 2007–2011 (2nd Gen) Ford Cougar 2001–2003 (Mk2) Ford Escape 2001–2007 (1st Gen) Ford Explorer 1995–2001 (UN/US) Ford F Series 1995–2004 (10th Gen) Ford Fiesta 2002–2005 (WP) Ford Fiesta 2009–2016 (WS/WT/WZ) Ford Focus (incl. XR5) 1999–2004 (LR) Ford Focus (incl. XR5) 2005–2007 (LS/LT) Ford Focus (incl. XR5) 2008–2011 (LV) Ford KA 1997–2011 (1st Gen) Ford Kuga 2011–2013 (1st Gen) Ford Mondeo 1993–2003 (Mk2) Ford Mondeo 2007–2014 (MB/MC) Ford Transit 2001–2006 (VF/VG/VH/VJ) Ford Transit 2007–2014 (VM) Holden Astra Coupe 1995–1998 (TR) Holden Astra Coupe 1998–2004 (TS) Holden Astra Sedan 1995–1998 (TR) Holden Astra Sedan 1998–2004 (TS) Holden Astra Wagon 1995–1998 (TR) Holden Astra Wagon 1998–2004 (TS) Holden Barina 2000–2005 (XC) Holden Combo 2002–2012 (XC) Holden Commodore 2002–2007 (VY/VZ) Holden Tigra 2004–2009 (XC) Iveco Daily 2007–2014 (5th Gen) Iveco Daily 2015–2017 (6th Gen) Iveco Daily 2018–2019 (6th Gen) Jaguar S-Type 2003–2008 Land Rover Discovery II 1998–2004 (L318) Land Rover Range Rover 1995–2002 (P38) Mercedes A Class 2005–2007 (W169) Mercedes A Class 2007–2011 (W169) Mercedes C Class 2000–2004 (W203) Mercedes CLK 1999–2002 (W208) Mercedes CLK 2002–2004 (W208) Mercedes M Class 1999–2004 (W163) Mercedes Vito (incl. Viano & Valente) 1998–2004 (W638) Mercedes Vito (incl. Viano & Valente) 2004–2007 (W639) Peugeot 206 1998–2001 (T1) Peugeot 306 1993–2001 (N3/N5) Porsche 911 1998–2005 (996) Porsche Boxster 1998–2004 (986) Renault Megane 1996–2000 (I) Rover 75 1999–2011 Smart City (incl. Cabrio) 1998–2003 (C450) Smart For Four 2004–2006 (W454) Smart For Two 2002–2007 (C450) Smart For Two 2008–2014 (451) Smart Roadster 2003–2011 (R452) Volvo V70 1996–2000 (1st Generation) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC, Stinger) Vehicle-specific ISO wiring harnesses for compatible models Stinger ST27AA06 (for BMW 3 Series E46 2002–2005 models) Stinger ST27AA04 Euro ISO to DIN female adaptor (female DIN orientation alternative) Stinger SFDFR01 fascia kit (Ford Kuga 1st Gen / Ford Fiesta WQ) Stinger SFDFR03 fascia kit (Ford Fiesta WS/WT/WZ) Stinger SFDFR06 fascia kit (Ford Focus LW) Stinger AFP-07-03/BK fascia kit (Ford KA) Stinger SFSFI01 fascia kit (Fiat Punto 3rd Gen) Stinger SFMFI01 fascia kit (Fiat Ducato 3rd Gen) Frequently Asked Questions What is the difference between the ST27AA01 and the ST27AA04? Both adaptors convert a Euro ISO connector to a DIN connection, but in different orientations. The ST27AA01 converts a female Euro connector to a male DIN plug. The ST27AA04 converts a male Euro connector to a female DIN socket. Confirm which Euro connector gender your vehicle has before ordering — contact the F.A.E. team if unsure. Does the ST27AA01 fit the BMW 3 Series E46? Only for 1997–2001 E46 models. For 2002–2005 E46 models, the ST27AA06 is required instead. If you are unsure of your E46's production date, check your VIN plate or contact the F.A.E. team to confirm. Is this an amplified adaptor? No. The ST27AA01 is a passive adaptor — it converts the connector without active signal amplification. For applications requiring signal boosting, see the ST27AA08 (amplified Euro to DIN). Do I need this adaptor if I already have an ISO wiring harness? Yes, in most cases. An ISO wiring harness handles the power and audio wiring connections. The antenna adaptor is a separate requirement — it handles only the antenna signal cable. Both are typically needed for a complete head unit installation. Does this adaptor suit the Ford KA and Ford Focus LR? Yes. The ST27AA01 is compatible with the Ford KA 1st Gen (1997–2011), Ford Focus LR (1999–2004), Ford Focus LS/LT (2005–2007), and Ford Focus LV (2008–2011) — which also have matching Stinger fascia kits listed in this session. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger ST27AA14 Amplified Euro Fakra Male to Male DIN Antenna Adaptor An amplified single Fakra male to male DIN antenna adaptor covering over 70 European, Holden, and Jeep vehicles active signal boost for improved AM/FM reception through the Fakra antenna system. Product Overview The Stinger ST27AA14 is an amplified vehicle-specific antenna adaptor that converts the factory single Fakra male connector to a standard male DIN plug for aftermarket head units. The built-in amplifier boosts the antenna signal, providing improved reception compared to passive Fakra adaptors when used on vehicles where signal amplification is beneficial. The ST27AA14 covers a broad range of European vehicles across Alfa Romeo, Audi, BMW, Citroen, Dodge, Fiat, Ford, Holden, Jaguar, Jeep, Land Rover, Mercedes, Opel, Peugeot, Porsche, Renault, Skoda, Volkswagen, and more. Vehicle-specific installation notes: Holden Colorado RG (2014–2016): Required for MyLink models only Audi A3/S3 8P (2004–2013): Required for late models with single Fakra connector BMW Mini R50 (2002–2006): Do not connect the ST27AA14 power wire — leave the power wire unplugged on this vehicle Features & Benefits Amplified signal boost — improved AM/FM reception through Fakra antenna systems Converts single Fakra male connector to standard male DIN plug Plug and play — no cutting or modification required Covers 70+ vehicles across 18 brands Vehicle-specific installation notes for Holden Colorado, Audi A3, and BMW Mini Technical Specs Specification Detail SKU / Part Number ST27AA14 Brand Stinger Adaptor Type 1x Male Fakra Connector to Male Standard DIN Connector Amplified Yes — active signal amplification Vehicle Notes Holden Colorado RG 2014–2016: MyLink models only; Audi A3 8P: late models with single Fakra; BMW Mini R50: leave power wire unplugged Compatible With / Goes Well With Direct Vehicle Fit: Alfa Romeo Giulietta 2014–2015 (940) Alfa Romeo Mito 2014–2015 (955) Audi A3 (incl. S3) 2004–2013 (8P) — late models with single Fakra only Audi TT 2006–2014 (8J) BMW 3 Series (incl. M3) 2005–2014 (E90) BMW Mini 2002–2006 (R50) — do not connect power wire Citroen C2 2006–2008 (1st Gen) Citroen C3 2010–2016 (2nd Gen) Citroen C4 2004–2010 (1st Gen) Citroen C5 2004–2007 (DC/DE) Citroen C5 2008–2013 (RD/TD) Citroen DS3 2009–2016 (1st Gen) Dodge RAM 2013–2018 (4th Gen) Fiat 500 2015–2018 (Series 5) Fiat Ducato 2015–2018 (4th Gen) Ford Kuga 2013–2015 (2nd Gen) Holden Astra Coupe 2005–2009 (AH) Holden Astra Coupe 2015–2018 (BK) Holden Astra Sedan 2005–2009 (AH) Holden Astra Sedan 2017–2018 (BL) Holden Astra Wagon 2005–2009 (AH) Holden Barina 2012–2016 (TM) Holden Barina Spark 2010–2016 (MJ) Holden Captiva 5 (incl. Maxx) 2006–2015 (CG) Holden Colorado (incl. 7) 2014–2016 (RG) — MyLink models only Holden Commodore 2013–2015 (VF) Holden Cruze 2008–2016 (J300) Holden Malibu 2013–2016 (EM) Holden Trax 2013–2017 (TJ) Holden Vectra 2003–2011 (ZC) Jaguar X-Type 2002–2015 Jaguar XJ8 2003–2008 Jeep Cherokee 2014–2018 (KL) Jeep Renegade 2015–2016 (BU-520) Land Rover Defender 2008–2015 Mercedes A Class 2005–2007 (W169) Mercedes A Class 2007–2011 (W169) Mercedes B Class 2005–2007 (W245) Mercedes B Class 2007–2011 (W245) Mercedes S Class 1998–2006 (W220) Mercedes SLK Class 2004–2011 (R171) Mercedes Vito (incl. Viano & Valente) 2015–2019 (W447) Opel Astra 2012–2013 (AS) Opel Corsa 2012–2014 (D) Opel Insignia 2012–2014 (A/Mk1) Peugeot 207 2006–2011 (A7) Peugeot 307 2001–2012 (T5/T6/T7) Peugeot 406 1995–2004 Peugeot 407 2004–2011 (Series 1/2) Porsche 911 2005–2012 (997) Porsche Boxster 2004–2012 (987) Porsche Cayenne 2002–2012 (9PA) Porsche Cayenne 2013–2018 (92A) Porsche Cayman 2005–2011 (987C) Renault Master 2011–2018 (X62) Renault Trafic 2011–2014 (X83) Renault Trafic 2015–2018 (X82) Skoda Octavia 2004–2008 (1U) Skoda Superb 2009–2015 (3T) Volkswagen Caddy 2005–2015 (2K Series) Volkswagen Caddy 2015–2019 (2K Series) Volkswagen Crafter 2007–2017 (2E/2F Series) Volkswagen EOS 2005–2013 (1F) Volkswagen Golf (incl. GTI) 1999–2004 (Mk4 / 1K Series) Volkswagen Passat 2005–2014 (B6/B7 Series) Volkswagen Polo 2005–2009 (6Q/9N/9N3 Series) Volkswagen Polo 2010–2014 (6R Series) Volkswagen Touareg 2004–2010 (7L) Volkswagen Transporter (incl. Multivan & Caravelle) 2004–2009 (T5 Series) Volkswagen Transporter (incl. Multivan & Caravelle) 2010–2015 (T5 Series) Volkswagen Up! 2013–2015 (1st Generation) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC, Stinger) Vehicle-specific ISO wiring harnesses for compatible models Stinger SFDPE04 fascia kit (Peugeot 207/307) Stinger SFMMB03 fascia kit (Mercedes CLK W209) Stinger BKFR020 / SFDFR01 fascia kits (Ford Kuga) Stinger HRDG001 radio replacement kit (Dodge RAM 4th Gen) Frequently Asked Questions What does "amplified" mean for this antenna adaptor? The ST27AA14 contains a built-in signal amplifier that actively boosts the antenna signal before passing it to the aftermarket head unit. This compensates for signal loss that can occur through the Fakra connector conversion and helps maintain strong AM/FM reception — particularly beneficial in areas with weaker broadcast signals. Is the BMW Mini R50 compatible, and is there a special installation note? Yes, the BMW Mini R50 (2002–2006) is on the compatibility list, but there is a critical installation note: do not connect the ST27AA14 power wire on this vehicle. Leave the power wire unplugged. Connecting power on the Mini R50 may cause damage — follow this instruction carefully. Does this adaptor suit all Holden Colorado RG models? No. The ST27AA14 is required for Holden Colorado RG (2014–2016) MyLink models only. Non-MyLink Colorado RG variants use a different antenna connector configuration. Confirm your Colorado has the MyLink infotainment system before ordering. Is this a plug-and-play adaptor? Yes at the vehicle end — the Fakra male connector connects directly to the factory antenna socket without cutting or modifying the factory wiring. Do I need this adaptor if I already have an ISO wiring harness? Yes, in most cases. An ISO wiring harness handles the power and audio wiring connections. The antenna adaptor is a separate requirement — it handles only the antenna signal cable. Both are typically needed for a complete head unit installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail/Indicator with Integrated Licence Plate Lamp Harness Compatible, IP67 Product Overview The LED Autolamps 99ARL2 is a 12V rear combination lamp covering stop, tail, and indicator functions with an integrated licence plate lamp in a square 107mm x 107mm x 23mm housing. Compatible with the LED Autolamps small harness system for plug-and-play wiring, it suits trailers and caravans requiring a compact square lamp with built-in number plate illumination. ECE road approved and rated IP67. Features & Benefits Integrated licence plate lamp — built-in number plate illumination eliminates a separate fitting Small harness compatible — connects directly into LED Autolamps' small harness wiring system for clean, tool-free installation 107mm x 107mm square form factor — compact square housing suits a wide range of trailer and caravan rear panel positions ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 99ARL2 Lamp Type Stop / Tail / Indicator / Licence Plate Voltage 12V Dimensions 107mm x 107mm x 23mm Harness Small harness compatible Mounting Surface mount Protection Rating IP67 Compliance ECE Compatible With / Goes Well With Trailers and caravans requiring a compact square rear combination lamp with integrated licence plate 12V trailer electrical systems LED Autolamps small harness wiring systems (confirm compatible harness with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 99ARL2 approved for road use in Australia? Yes. The 99ARL2 is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. What is small harness compatibility? The 99ARL2 is compatible with LED Autolamps' small harness wiring system, allowing it to connect directly into a compatible trailer wiring harness without cutting or splicing — a cleaner, faster installation option. Does the 99ARL2 include a licence plate lamp? Yes. The integrated licence plate lamp illuminates the number plate without requiring a separate fitting. What is the IP rating on the 99ARL2? The 99ARL2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 99ARL2 carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger STBAA21 Antenna Adaptor for Chrysler, Jeep, Dodge, GM, Ford & Holden OEM Plug to Standard DIN A high-quality antenna adaptor converting the factory OEM antenna plug to a standard DIN connection covers 33 vehicles across Chrysler, Jeep, Dodge, Cadillac, Chevrolet, GMC, Hummer, Ford, Holden, and Suzuki from 1986 to 2014. Product Overview The Stinger STBAA21 is a vehicle-specific antenna adaptor for a wide range of American and Holden vehicles, allowing the factory OEM antenna connector to be connected to the standard DIN antenna input on aftermarket head units. Plug-and-play no cutting or modification required. Note: Despite being titled as a "Chrysler Antenna Adapter," the STBAA21 covers a broad range of brands sharing the same factory antenna connector — including Jeep, Dodge, Cadillac, Chevrolet, GMC, Hummer, Ford, Holden, and Suzuki. Always check the full compatibility list before purchasing. Features & Benefits Converts OEM antenna plug to standard DIN connection High-quality conversion for reliable signal transfer Plug and play — no cutting or modification required Covers 33 vehicles across 10 brands from 1986–2014 Technical Specs Specification Detail SKU / Part Number STBAA21 Brand Stinger Adaptor Type OEM to Standard DIN Vehicle Application Chrysler, Jeep, Dodge, GM, Ford, Holden, Suzuki (see compatibility list) Compatible With / Goes Well With Direct Vehicle Fit: Cadillac Escalade 2007–2014 (3rd Gen) Chevrolet Silverado 2007–2014 (2nd Gen) Chevrolet Suburban 2007–2013 (10th Gen) Chrysler 300C 2005–2008 (1st Gen) Chrysler Neon 2000–2006 (2nd Gen) Chrysler Prowler 2002 Chrysler PT Cruiser 2001–2005 (1st Gen) Chrysler PT Cruiser 2006–2011 (2nd Gen) Dodge Caliber 2006–2009 (1st Gen) Dodge RAM 2002–2005 (3rd Gen) Dodge RAM 2006–2008 (3rd Gen) Dodge Viper 2002–2009 (2nd Gen) Ford Explorer 2006–2011 (UZ) Ford F Series 2009–2014 (12th Gen) Ford Mustang 2005–2011 (5th Gen) Ford Mustang 2010–2014 (5th Gen) Ford Super Duty (F Series) 2008–2010 (2nd Gen) GMC Sierra 2007–2014 (2nd Gen) Holden Barina 2006–2011 (TK) Holden Captiva 7 (incl. variants) 2006–2015 (CG) Holden Epica 2006–2011 (EP) Holden Viva 2006–2011 (JF) Hummer H2 2008–2011 Jeep Cherokee 2001–2007 (KJ) Jeep Commander 2005–2008 (XK) Jeep Compass 2007–2009 (MK) Jeep Grand Cherokee 1993–1998 (ZG) Jeep Grand Cherokee 1999–2004 (WJ/WG) Jeep Grand Cherokee 2005–2009 (WH) Jeep Patriot 2007–2009 (MK) Jeep Wrangler 1986–2004 (YJ/TJ) Jeep Wrangler 1997–2006 (TJ) Suzuki XL7 2007–2009 (JA) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC, Stinger) Vehicle-specific ISO wiring harnesses for Chrysler/Dodge, Jeep, Ford, GM, and Holden Stinger HRDG001 radio replacement kit (for Dodge RAM 3rd Gen) Stinger SRP-JW07H HEIGH10 infotainment kit (for Jeep Wrangler JK) Frequently Asked Questions Why does a "Chrysler" adaptor cover Ford, GM, and Holden vehicles? Many American-market vehicles from this era share the same factory antenna connector type across brands — Chrysler, GM, Ford, and related Holden models all use compatible antenna plugs. Always check the full compatibility list before purchasing rather than relying on the product name alone. Is this a plug-and-play adaptor? Yes. The STBAA21 connects the factory OEM antenna plug to a standard DIN connection without any cutting or modification to the factory antenna cable. Does this adaptor suit the Jeep Wrangler JK (2007–2018)? No. The STBAA21 covers Jeep Wrangler YJ/TJ models up to 2006. The JK Wrangler (2007–2018) uses a different connector — confirm the correct antenna adaptor for the JK with the F.A.E. team before purchasing. Do I need this adaptor if I already have an ISO wiring harness? Yes, in most cases. An ISO wiring harness handles the power and audio wiring connections. The antenna adaptor is a separate requirement — it handles only the antenna signal cable. Both are typically needed for a complete head unit installation. Is this adaptor compatible with the Dodge RAM NP300 (D23)? No. The STBAA21 covers Dodge RAM 3rd Gen (2002–2008). The Dodge RAM NP300 (D23) is a different generation — see the Stinger HRDG001 radio replacement kit which includes an antenna adaptor for the applicable RAM model. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR and ECE Approved Rear Outline Marker A Direct Globe Replacement for Trucks, Trailers, and Commercial Vehicles. Product Overview The LED Autolamps 69RM is a red rear end outline marker designed as a retrofit replacement for traditional globe-type marker lamps in trucks, semi-trailers, caravans, and commercial vehicles. Carrying both ADR and ECE road approvals, it meets the lighting compliance requirements for Australian registered vehicles while also satisfying European ECE certification suited to imported vehicles and fleet operators working across multiple compliance frameworks. Rated at multivolt 12V to 24V and IP67 waterproof, the 69RM is a fit-and-forget upgrade over the globe it replaces. The LED light source eliminates the globe replacement cycle entirely, delivering significant long-term cost savings on fleet vehicles where marker globe failures are a routine maintenance burden. A 5-year warranty adds further confidence for fleet and owner-builder fitments alike. Key Specifications Colour: Red Light style: Rear end outline marker (clearance marker) Voltage: 12V – 24V (multivolt) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR and ECE road approved Design: Retrofit — replaces globe type Dimensions: Not specified Packaging: Blister pack Sold as: Each Warranty: 5 years Current draw: Not specified — confirm with LED Autolamps Mount type: Not specified — confirm with LED Autolamps Connector type: Not specified — confirm with LED Autolamps Features & Benefits Retrofit Globe Replacement Design — Engineered to fit directly into existing globe-type marker lamp housings without modification, making it a straightforward like-for-like upgrade for trucks, trailers, and caravans currently running incandescent globe markers. ADR and ECE Road Approved — Dual compliance covering both Australian Design Rules and European ECE regulations — suited to Australian-registered vehicles and imported commercial vehicles requiring multi-standard certification. IP67 Waterproof Rating — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes — fully protected against the wash-downs, rain, and road spray common to Australian transport environments. 12V – 24V Multivolt — Works natively on both 12V and 24V systems without modification, covering passenger vehicles, caravans, and 24V commercial trucks in a single SKU. No Globe Replacement Required — LED technology eliminates the routine globe replacement cycle. For fleet operators running dozens of markers, this represents a meaningful reduction in ongoing maintenance cost and vehicle downtime. 5-Year Warranty — A 5-year manufacturer's warranty provides long-term confidence well beyond the service life of the globe-type lamp it replaces. Technical Specs Specification Detail Brand LED Autolamps Part Number 69RM Colour Red Light Style Rear End Outline Marker Light Type LED Voltage 12V – 24V (Multivolt) IP Rating IP67 Compliance ADR Road Approved / ECE Approved Design Retrofit — Replaces Globe Type Dimensions Not specified Packaging Blister Pack Sold As Each Current Draw Not specified Mount Type Not specified Connector Type Not specified Warranty 5 Years Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) with existing globe-type outline marker housings B-doubles and road trains Caravans and camper trailers Box trailers and flatbed trailers Buses and coaches Imported commercial vehicles requiring ECE compliance Any vehicle currently running globe-type rear end outline markers Pairs well with: LED Autolamps amber front and side position markers for a full-vehicle LED marker upgrade LED Autolamps combination stop/tail/indicator lamp assemblies LED Autolamps 58RM rear position markers for smaller marker positions Frequently Asked Questions Does the 69RM require a new lamp housing or does it fit an existing globe-type fitting? The 69RM is designed as a retrofit replacement for existing globe-type rear marker lamp housings. It is intended to fit directly without modification — however, confirm dimensional compatibility with your specific housing before purchasing, as housing profiles vary across vehicle makes and models. What is ECE approval and why does it matter? ECE (Economic Commission for Europe) approval is an internationally recognised lighting standard used across European and many imported commercial vehicles. Dual ADR/ECE approval means the 69RM meets compliance requirements for both Australian-registered vehicles and imported commercial equipment requiring European certification. Will the 69RM work on both 12V and 24V vehicles? Yes. The multivolt 12V to 24V operating range covers both light passenger and recreational vehicles and 24V heavy commercial trucks without any modification or voltage-specific variants. What does IP67 mean for an outdoor marker lamp? IP67 means the lamp is completely sealed against dust and can withstand water immersion to 1 metre for 30 minutes — protecting it against rain, road spray, wash-downs, and wet crossings encountered in Australian transport and touring conditions. How does replacing globe-type markers with the 69RM reduce maintenance costs? LED technology has no consumable filament, so there is no recurring globe replacement cost. For fleet operators managing large numbers of marker positions, the elimination of globe procurement, labour, and vehicle downtime for routine marker replacements adds up to a meaningful long-term saving. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger BKFR046 Replacement Hazard & Door Lock Switch for Ford Vehicles The required replacement hazard and door lock switch for Stinger Ford dash fascia kit installations black finish, direct fit for Ford Fiesta, and a required companion part for multiple Stinger Ford fascia kits. Product Overview The Stinger BKFR046 is a replacement hazard and door lock switch designed for Ford vehicles. When a Stinger fascia kit is installed to replace the factory Ford head unit, the factory hazard and door lock switch (which is integrated into the factory fascia surround) must be replaced. The BKFR046 provides this replacement switch in a format compatible with Stinger's Ford dash kits. The BKFR046 is a required accessory for the following Stinger Ford fascia kits do not install these kits without also sourcing the BKFR046: SFDFR03 (Ford Fiesta WS/WT/WZ 2009–2016) SFDFR06 (Ford Focus LW incl. XR5 2012–2015) BKFR020 (Ford Kuga 2nd Gen 2013–2015) Please note: For the Ford Fiesta 2006–2008 (WQ), mounting may require some customisation to clip in correctly. For single DIN installation in the Fiesta WQ, the BKUNIP universal pocket is also required and sold separately. Features & Benefits Replacement hazard and door lock switch for Ford fascia kit installations Required companion part for multiple Stinger Ford dash kits Black finish Direct fit for Ford Fiesta 2006–2008 Technical Specs Specification Detail SKU / Part Number BKFR046 Brand Stinger Colour / Finish Black Mounting Brackets Included No Vehicle Notes Ford Fiesta 2006–2008 may require minor mounting customisation to clip in. Single DIN install requires BKUNIP (sold separately). Required By SFDFR03, SFDFR06, BKFR020 (and other compatible Stinger Ford fascia kits) Compatible With / Goes Well With Direct Vehicle Fit: Ford Fiesta 2006–2008 (WQ) Also Required For: Stinger SFDFR03 — Ford Fiesta WS/WT/WZ 2009–2016 Stinger SFDFR06 — Ford Focus LW (incl. XR5) 2012–2015 Stinger BKFR020 — Ford Kuga 2nd Gen 2013–2015 Goes Well With: BKUNIP universal single DIN pocket — required for single DIN installation in Ford Fiesta WQ (sold separately) Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Vehicle-specific ISO wiring harness for Ford Frequently Asked Questions Which Stinger fascia kits require the BKFR046? The BKFR046 is a required accessory for the Stinger SFDFR03 (Ford Fiesta WS/WT/WZ), SFDFR06 (Ford Focus LW/XR5), and BKFR020 (Ford Kuga 2nd Gen). It may also be required for other Stinger Ford fascia kits — confirm with the F.A.E. team if you are unsure whether your kit requires this part. Why is this switch needed when installing an aftermarket head unit? The factory Ford fascia surround integrates the hazard and door lock switch into the same trim panel as the head unit. When the factory surround is removed and replaced with a Stinger aftermarket fascia kit, this switch must be replaced separately — the BKFR046 is the compatible replacement that fits Stinger's Ford fascia kits. Does the BKFR046 require any modification to fit? In most applications it clips in directly. For the Ford Fiesta 2006–2008 (WQ), some minor customisation of the mounting position may be required to clip in correctly. Do I also need the BKUNIP universal pocket? Only if you are installing a single DIN head unit in the Ford Fiesta WQ (2006–2008). The BKUNIP is sold separately and is required to fill the remaining space below a 1DIN head unit in that application. For 2DIN installations, the BKUNIP is not required. Is the BKFR046 a direct replacement for the factory Ford hazard switch? The BKFR046 is a replacement switch designed to work with Stinger Ford fascia kits — it replaces the hazard and door lock switch that was integrated into the factory surround. It is not a drop-in replacement for the factory switch housing itself, but rather the compatible switch assembly for use with Stinger's Ford aftermarket fascia panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

9-Inch Trapezoid Head Unit Fascia Toyota HiAce H300 Series 2019 Onwards. Covers All Body Configurations Including LWB, SLWB, Crew Van, and Window Van. All Trim Levels. Fascia Panel Only. Product Overview The Stinger SF9-TY04 is a vehicle-specific 9-inch trapezoid head unit fascia designed for the Toyota HiAce H300 Series (sixth-generation, 2019–current). The H300 HiAce dashboard features a trapezoid-shaped factory aperture wider at the top than the bottom which standard rectangular double DIN fascias cannot accommodate. The SF9-TY04 is precision-engineered to this trapezoid geometry, providing a professional, factory-matched installation for compatible 9-inch head units from Alpine, Kenwood, Pioneer, and Aerpro. Coverage spans the entire H300 production run from 2019 onwards, across all body configurations LWB, SLWB, standard roof, high roof, crew van, and window van and all trim levels from base fleet spec through to top-specification. A single SKU covers the complete Australian H300 HiAce range. The HiAce is Australia's most trusted commercial van platform deployed across trades, courier, patient transport, tourism, construction, and fleet operations where reliable, consistent multimedia integration is a business requirement. The SF9-TY04 is moulded in UV-resistant ABS with a factory colour-matched finish (typically black or dark grey depending on interior trim confirm the exact colour from the official Stinger SF9-TY04 product page before publishing). The fascia enables fleet standardisation, allowing identical head unit installations across multiple H300 HiAce vehicles of varying age within the same fleet. Wiring harness, antenna adaptor, and steering wheel control interface are not included and must be purchased separately. Key Specifications Part number: SF9-TY04 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid only Finish: Factory colour match — typically black/dark grey (confirm from official product page) Vehicle: Toyota HiAce H300 Series 2019 onwards (sixth-generation) Body configurations: LWB, SLWB, standard roof, high roof, crew van, window van Trim levels: All (base through top-spec) Confirmed compatible head units: Alpine INE-AW4095, Alpine INE-AX809, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC interface: Not included — sold separately Camera retention harness: Not included — sold separately (confirm if required) Features & Benefits All H300 Body Configurations — One SKU A single fascia covers the entire H300 HiAce range — LWB, SLWB, standard roof, high roof, crew van, and window van — from 2019 to current production across all trim levels. The dashboard architecture and trapezoid aperture geometry is consistent across all H300 body styles. Trapezoid Geometry — Standard Double DIN Will Not Fit The H300 HiAce features a trapezoid-shaped dash aperture. Standard rectangular double DIN fascias leave visible gaps or cannot mount securely. The SF9-TY04's trapezoid design is required for correct fitment. Fleet Standardisation The SF9-TY04 enables consistent head unit installations across multiple H300 HiAce vehicles regardless of body configuration, trim level, or production year within the 2019-onwards range — simplifying driver familiarity and reducing maintenance complexity across commercial fleets. Factory Finish — Commercial Grade Injection-moulded in UV-resistant ABS with a factory colour-matched finish maintaining the HiAce's professional, utilitarian interior appearance important for commercial fleet operators and trade contractors. Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing fleet managers and professional installers to source the correct wiring harness, SWC interface, and accessories for each vehicle's specific configuration. Technical Specs Specification Detail Brand Stinger Part Number SF9-TY04 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Finish Factory colour match, typically black/dark grey (confirm from official page) Vehicle Toyota HiAce H300 Series 2019 Onwards Body Configurations LWB, SLWB, Standard Roof, High Roof, Crew Van, Window Van Trim Levels All (base through top-spec) Confirmed Head Units Alpine INE-AW4095, INE-AX809; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; Aerpro AM9X Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Interface Not included Camera Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Chassis Body Configurations Toyota HiAce 2019 onwards H300 (6th gen) LWB, SLWB, Crew Van, Window Van (all roof heights) Confirmed compatible 9-inch trapezoid head units: Alpine INE-AW4095 Alpine INE-AX809 Kenwood DMX80AXS Pioneer DMH-AP6650BT Aerpro AM9X Recommended accessories (sold separately): Toyota HiAce H300-specific wiring harness (Toyota-to-ISO) Antenna adaptor for Toyota Steering wheel control interface Reverse camera retention harness (confirm if equipped) Frequently Asked Questions Does the SF9-TY04 cover all H300 HiAce body styles? Yes — the SF9-TY04 covers all H300 HiAce body configurations including LWB, SLWB, standard roof, high roof, crew van, and window van across all trim levels from 2019 to current production. The dashboard architecture and trapezoid aperture geometry is consistent across all body styles in the H300 range. Why can't I use a standard double DIN fascia in my HiAce? The H300 HiAce features a trapezoid-shaped dash aperture — wider at the top than the bottom. Standard rectangular double DIN fascias cannot accommodate this geometry. The SF9-TY04 is specifically engineered for the H300 trapezoid aperture, providing flush fitment with no visible gaps and secure head unit mounting. Does the SF9-TY04 include wiring harnesses or installation accessories? No — the SF9-TY04 is a fascia panel only. A Toyota HiAce H300-specific wiring harness, antenna adaptor, and steering wheel control interface are required separately. A reverse camera retention harness may also be required depending on the vehicle's factory equipment. Is the SF9-TY04 suitable for fleet installations across multiple HiAce vehicles? Yes — the SF9-TY04 provides consistent fitment across all 2019-onwards H300 HiAce models regardless of body configuration or trim level, enabling fleet-wide standardisation with identical head unit installations across multiple vehicles. Which 9-inch head units are confirmed compatible? Confirmed compatible head units include Alpine INE-AW4095, Alpine INE-AX809, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, and Aerpro AM9X. Standard double DIN or universal 9-inch units will not fit without this vehicle-specific fascia. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Allows Installation of An Aftermarket Single/Double DIN Radio Into Your Vehicle Features: Kit Include Mounting Brackets: Yes Colour: Black Finish Vehicle Notes: 2010 – 2015 Hyundai IX35 – Suits Non Navigation Models 2010 – 2013 Hyundai IX35 – Suits Navigation Models with Volume & Tuning Knobs in Line with CD Mech Vehicle Compatibility: Hyundai ix35 2010 - 2013 (LM) Hyundai ix35 2014 - 2015 (LM) - Without Nav. Legendary Products & Support From Authorized Dealers When you choose Metra, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Metra dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Metra's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Metra dealer today!

Read more less

GME MB104SS 63mm Wrap-Around Bull Bar Antenna Mounting Bracket Stainless Steel A genuine 3mm stainless steel 63mm wrap-around bull bar antenna mounting bracket from GME, the MB104SS provides a rugged, corrosion-resistant antenna mounting solution for 63mm bull bar tube profiles in a natural stainless steel finish. Sold individually. Product Overview The GME MB104SS is a heavy-duty 3mm stainless steel wrap-around bull bar antenna mounting bracket in natural stainless finish, designed for 63mm bull bar tube diameters. The wrap-around style clamps securely around the bull bar tube without drilling or permanent modification. The 3mm stainless steel construction provides superior rigidity and long-term corrosion resistance for demanding off-road and outdoor antenna mounting applications. The natural stainless finish suits polished, brushed, or stainless accessories and bull bars. The black finish equivalent is available as the GME MB104B. Features & Benefits 3mm Stainless Steel - Heavy Duty Construction: 3mm stainless steel provides superior rigidity, corrosion resistance, and durability for demanding outdoor and off-road antenna mounting applications. 63mm Wrap-Around Design - No Drilling Required: The wrap-around clamp design secures to 63mm bull bar tubes without drilling or permanently modifying the bull bar, suited to heavy-duty bull bars on trucks and larger 4WDs. Natural Stainless Steel Finish: The stainless steel finish suits polished, brushed, or natural stainless bull bars and accessories for a clean, consistent appearance. Genuine GME Accessory: A genuine GME accessory ensuring correct fit and compatibility within the GME antenna mounting system. Technical Specs Specification Detail Part Number MB104SS Brand GME Type Wrap-Around Bull Bar Antenna Bracket Material 3mm Stainless Steel Finish Stainless Steel Bull Bar Diameter 63mm Sold As Each Warranty 1 Year Compatible With The MB104SS suits 63mm bull bar tube profiles. Confirm bull bar tube diameter before purchase. For the black finish version refer to the GME MB104B. For smaller tube profiles refer to the GME MB102SS (45mm). Frequently Asked Questions What bull bar diameter does the MB104SS suit? The MB104SS is designed for 63mm bull bar tube profiles. Does the MB104SS require drilling into the bull bar? No. The wrap-around clamp design secures to the bull bar tube without drilling or permanent modification. What is the difference between the MB104SS and the MB104B? Both are 3mm stainless steel 63mm wrap-around bull bar antenna brackets with identical construction and fit. The MB104SS has a natural stainless steel finish suited to polished or stainless accessories. The MB104B has a black finish suited to black bull bars and accessories. Choose based on the finish that best matches your vehicle build. What is the difference between the MB104SS and the MB102SS? Both are 3mm stainless steel wrap-around bull bar antenna brackets in natural stainless finish. The MB104SS suits 63mm tube profiles. The MB102SS suits 45mm tube profiles. Choose based on the diameter of your specific bull bar tube. Is the MB104SS compatible with all GME antennas? The MB104SS is a GME antenna mounting bracket compatible with standard GME antenna base fittings. Contact us before purchase to confirm thread and base compatibility with your specific GME antenna model.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GME MB104B 63mm Wrap-Around Bull Bar Antenna Mounting Bracket Black 3mm Stainless Steel A genuine 3mm black stainless steel 63mm wrap-around bull bar antenna mounting bracket from GME, the MB104B provides a rugged, corrosion-resistant antenna mounting solution for 63mm bull bar tube profiles in a black finish suited to black accessories and bull bar builds. Sold individually. Product Overview The GME MB104B is a heavy-duty 3mm stainless steel wrap-around bull bar antenna mounting bracket in black finish, designed for 63mm bull bar tube diameters. The wrap-around style clamps securely around the bull bar tube without drilling or permanent modification. The 3mm stainless steel construction provides superior rigidity and corrosion resistance for demanding off-road and outdoor antenna mounting applications. The black finish complements black bull bars and accessories common to 4WD and ute builds. The MB104B is the largest in the GME wrap-around bull bar bracket range, suited to heavy-duty bull bars with larger tube profiles common on trucks, larger 4WDs, and commercial vehicles. Features & Benefits 3mm Stainless Steel - Heavy Duty Construction: 3mm stainless steel provides superior rigidity, corrosion resistance, and durability for demanding outdoor and off-road antenna mounting applications. 63mm Wrap-Around Design - No Drilling Required: The wrap-around clamp design secures to 63mm bull bar tubes without drilling or permanently modifying the bull bar, suited to heavy-duty bull bars on trucks and larger 4WDs. Black Finish - Complements Black Bull Bars and Accessories: The black finish suits black bull bars and accessories common to 4WD, ute, and truck builds for a clean, integrated appearance. Genuine GME Accessory: A genuine GME accessory ensuring correct fit and compatibility within the GME antenna mounting system. Technical Specs Specification Detail Part Number MB104B Brand GME Type Wrap-Around Bull Bar Antenna Bracket Material 3mm Stainless Steel Finish Black Bull Bar Diameter 63mm Sold As Each Warranty 1 Year Compatible With The MB104B suits 63mm bull bar tube profiles. Confirm bull bar tube diameter before purchase. For smaller tube profiles refer to the GME MB103B (50mm), MB102B (45mm), or MB101B (38mm). Frequently Asked Questions What bull bar diameter does the MB104B suit? The MB104B is designed for 63mm bull bar tube profiles. Does the MB104B require drilling into the bull bar? No. The wrap-around clamp design secures to the bull bar tube without drilling or permanent modification. What material is the MB104B made from? The MB104B is constructed from 3mm stainless steel with a black finish, providing heavy-duty rigidity and corrosion resistance. What is the difference between the MB104B and the smaller GME wrap-around brackets? All GME wrap-around bull bar brackets in this range use 3mm black stainless steel construction. The MB104B suits 63mm tube profiles, the MB103B suits 50mm, the MB102B suits 45mm, and the MB101B suits 38mm. Choose based on the diameter of your specific bull bar tube. Is the MB104B compatible with all GME antennas? The MB104B is a GME antenna mounting bracket compatible with standard GME antenna base fittings. Contact us before purchase to confirm thread and base compatibility with your specific GME antenna model.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less