520 Series LHS Sequential Stop/Tail/Indicator/Reverse Diffused Tail, ECE Approved, 12/24V. Product Overview The LED Autolamps 520ARWMLCSB is the left-hand side version of the 520 Series the direct companion to the right-hand 520ARWMRCSB listed earlier in this session. A large-format sequential rear combination lamp delivering stop, diffused tail, sequential indicator, and reverse functions in a 520mm x 141mm x 28.5mm housing. The 520 Series provides premium sequential indicator sweep and diffused tail function for high-visibility rear lighting on large tray vehicles, trucks, and commercial trailers. The "LCS" suffix confirms left-hand side with chrome surround ("B" = bulk single unit). Separate the base plate from the lamp, horizontally mount onto a flat surface, clip the lamp into the base. ECE approved, IP67 rated, 12/24V multivolt, and backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail (diffused), sequential indicator, reverse Orientation: Left hand side (LHS) Dimensions: 520mm x 141mm x 28.5mm Mount type: Separate base plate clip lamp into base, horizontal surface mount IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 520ARWMLCSB Features & Benefits Sequential indicator: Dynamic sweeping amber indicator sequence for premium visibility and modern styling Diffused tail function: Soft, even LED glow across the full lamp face for a premium finished appearance Left-hand side: LHS orientation for correct lamp placement on the left side of the vehicle or trailer Large 520mm format: Suited to large tray vehicles, trucks, and commercial trailers Base plate and clip-in lamp: Separate base plate mounts to the surface; lamp clips into base for clean installation and easy replacement ECE approved: Legal for all four functions on Australian and international road vehicles IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 520ARWMLCSB Brand LED Autolamps Series 520 Series Functions Stop, Tail (diffused), Sequential Indicator, Reverse Orientation Left Hand Side (LHS) Dimensions 520mm x 141mm x 28.5mm Mount Type Separate base plate clip-in lamp, horizontal IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V large tray vehicles, trucks, and commercial trailers: Large ute tray builds requiring premium sequential rear lighting Commercial truck bodies Bus and coach rear panels Frequently Asked Questions Is this the right or left-hand lamp? This is the left-hand side (LHS) lamp. For the right-hand side, refer to the 520ARWMRCSB (previously listed). What is the sequential indicator? The sequential indicator LEDs sweep outwards in a dynamic amber sequence rather than a standard on/off flash a premium indicator style for improved visibility and road presence. What does "diffused tail" mean? Diffused tail delivers a soft, even LED glow across the full lamp face rather than discrete visible LED points producing a premium, modern tail light appearance. Is this lamp suitable for both 12V and 24V systems? Yes the 520 Series operates on 12–24V DC, covering both 12V and 24V applications. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Elevate Your Volkswagen's Sound with ZDSW7CS 7-inch Component Speaker Upgrade Kit The ZDSW7CS is a high-quality 7-inch Component speaker upgrade kit for a variety of different Volkswagen models (For specific models please view vehicle applications). The speaker kit includes a pair of impressive 180W speakers that fit into the original speaker locations of the vehicle and are incredibly easy to install thanks to their plug and play compatibility. The speakers have a 7‚Äù composite surround with a 20mm silk dome tweeter, composite paper cone and Y30 Ferrite Magnet. The kit replaces the original speakers to provide fantastic performance across the entire frequency range, making a drastically improved experience when compared to the standard factory offering or even higher priced options. The ZDSW7CS 7-inch Component Speaker System is meticulously engineered to elevate audio performance in various Volkswagen models. These speakers are purposefully designed to seamlessly replace the original OEM speakers in your vehicle, ensuring the same fitment and plug-and-play connector that effortlessly integrates with the vehicle's original wiring. This means no drilling holes or cutting of wires, preserving the integrity of your vehicle while upgrading its audio capabilities. This advanced system boasts a comprehensive array of technical specifications designed to optimize sound quality and power handling.With a Power Handling (RMS) of 90W and a maximum Power Handling of 180W, the ZDSW7CS ensures exceptional audio reproduction across a wide range of frequencies. Its Frequency Response guarantees accurate sound reproduction, capturing both deep lows and crisp highs with precision. Featuring a 4Œ© impedance this speaker system maximizes compatibility and efficiency, ensuring seamless integration with your vehicle's audio system. With the 20mm silk dome tweeter, composite paper cone, and Y30 Ferrite Magnet, these speakers deliver exceptional performance across the entire frequency range. The plastic-reinforced basket ensures durability, while the rubber surround provides resilience for optimal bass response. When replacing the factory speakers, the ZDSW7CS kit offers a significant improvement in audio quality, surpassing standard offerings and even higher-priced alternatives. Compatible with various Volkswagen models, this upgrade promises to transform your in-car audio experience like never before. Phoenix Gold ZDSW7CS Specifications: ¢ Speaker Size: 7‚Äù (180mm) 2-Way Speaker System ¢ Power Handling (RMS): 90W ¢ Power Handling (MAX): 180W ¢ Impedance: 4Œ© ¢ Plastic Reinforced Basket ¢ Surround – Rubber ¢ Magnet – Ferrite ¢ Cone Material – Composite Paper Cone Phoenix Gold ZDSW7CS Vehicle Application: Skoda Skoda Octavia (II) 2004 – 2013 Skoda Superb (II) 2008 – 2015 Skoda Yeti 2018 -> Volkswagen Volkswagen Alhambra (II) 2010 – 2020 Volkswagen Arteon 2017 -> Volkswagen Arteon break 2020 -> Volkswagen Atlas 2017 -> Volkswagen Atlas cross sport 2020 -> Volkswagen Beetle 2017 -> Volkswagen Beetle (III) 2011 – 2016 Volkswagen Bora 2007 – 2013 Volkswagen Caddy (III) 2004 – 2015 Volkswagen Caddy (IV) 2015 – 2020 Volkswagen CC 2017 -> Volkswagen Eos 2006 – 2015 Volkswagen Golf (V) 2003 – 2008 Volkswagen Golf plus 2005 – 2014 Volkswagen Jetta (V) 2005 – 2010 Volkswagen Lamando 2014 – 2022 Volkswagen Magotan 2016 -> Volkswagen Passat 2015 – 2022 Volkswagen Phideon 2016 -> Volkswagen Sharan 2010 – 2022 Volkswagen Taramont 2017 -> Volkswagen Taramont x 2020 -> Volkswagen Tayron 2019 -> Volkswagen Tiguan (II) 2016 -> Volkswagen Tiguan X 2022 -> Volkswagen Touareg (II) 2010 – 2017 Volkswagen Touareg (III) 2018 -> Volkswagen Touran 2003 – 2010 Volkswagen Touran (II) 2011 – 2015 Volkswagen Touran (III) 2016 -> Legendary Products & Support From Authorized Dealers When you choose Phoenix Gold, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Phoenix Gold dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Phoenix Gold's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Phoenix Gold dealer today!

Read more less

Elevate Your BMW's Sound System With the ZDSB100CS Speaker Upgrade Kit! The ZDSB100CS is a high-quality speaker upgrade kit for a variety of different BMW models (For specific models please view vehicle applications). The speaker kit includes a pair of impressive 120w speakers that fit into the original speaker locations of the vehicle and are incredibly easy to install thanks to their plug and play compatibility. The ZDSB100CS, 4-inch (100mm) 2-Way Speaker System is meticulously engineered to elevate audio performance in various BMW models. These speakers are purposefully designed to seamlessly replace the original OEM speakers in your vehicle, ensuring the same fitment and plug-and-play connector that effortlessly integrates with the vehicle's original wiring. This means no drilling holes or cutting of wires, preserving the integrity of your vehicle while upgrading its audio capabilities. This advanced system boasts a comprehensive array of technical specifications designed to optimize sound quality and power handling. With a Power Handling (RMS) of 60W and a maximum Power Handling of 120W, the ZDSB100CS ensures exceptional audio reproduction across a wide range of frequencies. Its Frequency Response of 100Hz – 20kHz guarantees accurate sound reproduction, capturing both deep lows and crisp highs with precision. Featuring a 4Œ© impedance and a 1‚Ä≥ (25mm) Voice Coil, this speaker system maximizes compatibility and efficiency, ensuring seamless integration with your vehicle's audio system. The inclusion of a 12dB Crossover enhances audio clarity by precisely separating frequencies for optimal performance. The tweeters in the ZDSB100CS are crafted from Silk, a material renowned for its ability to reproduce high tones with exceptional clarity and smoothness. Complementing the tweeters, the woofer is constructed from a Sandwich Composite Cone material, delivering balanced and articulate mid-range frequencies. Utilising Neo/Neo magnets, this speaker system achieves powerful and responsive sound reproduction while maintaining a compact and lightweight design. Phoenix Gold ZDSB100CS Specifications: Speaker Size: 4‚Äù (100mm) 2-Way Speaker System Power Handling (RMS): 60W Power Handling (MAX): 120W Frequency Response: 100Hz – 20kHz Impedance: 4Œ© Voice Coil: 1‚Ä≥ (25mm) Crossover: 12dB Tweeter Material: Silk Woofer Material: Sandwich Composite Cone Magnet: Neo/Neo Connections: Plug and Play Phoenix Gold ZDSB100CS Vehicle Applications: BMW 1-Series (F20) 2011 -> Front door BMW 1-Series (F21) 2012 -> Front door BMW 1-Series (F40) 2019 -> Front door BMW 1-Series (F52) 2019 -> Front door BMW 2-Series (F22) 2015 -> Front door BMW 2-Series (F23) 2015 -> Front door + Sidepanel rear BMW 2-Series (F44) 2020 -> Front door + Rear door BMW 2-Series (F45) 2014 -> Front door + Sidepanel rear BMW 2-Series (F46) 2015 -> Front door + Sidepanel rear BMW 2-Series (F87) 2015 -> Front door BMW 3-Series (F30) 2011 -> Front door + Rear door BMW 3-Series (F31) 2012 -> Front door + Rear door BMW 3-Series (F34) 2013 -> Front door + Rear door BMW 3-Series (F80) 2014 – 2018 Front door + Rear door BMW 3-Series (G20) 2019 -> Front door + Rear door BMW 3-Series (G21) 2019 -> Front door + Rear door BMW 4-Series (F32) 2014 -> Front door + Sidepanel rear BMW 4-Series (F33) 2014 -> Front door + Sidepanel rear BMW 4-Series (F36) 2014 -> Front door + Rear door BMW 4-Series (F82) 2014 -> Front door + Sidepanel rear BMW 4-Series (F83) 2014 -> Front door + Sidepanel rear BMW 4-Series (G22) 2020 -> Front door + Sidepanel rear BMW 5-Series (G30) 2017 -> Front door + Rear door BMW 5-Series (G31) 2017 -> Front door + Rear door BMW 5-Series (G38) 2017 -> Front door + Rear door BMW 6-Series (F06) 2012 -> Front door + Rear door BMW 6-Series (F12) 2011 -> Front door BMW 6-Series (F13) 2011 -> Front door BMW 6-Series (G32) 2017 -> Front door + Rear door BMW 7-Series (G11) 2015 -> Front door + Rear door BMW 7-Series (G12) 2015 -> Front door + Rear door BMW i3 2013 -> Front door + Rear door BMW i4 (G26) 2022 -> Front door + Rear door BMW i8 (L15) 2013 -> Front door BMW X1 (F48) 2015 -> Front door + Rear door BMW X1 (F49) 2015 -> Front door + Rear door BMW X2 (F39) 2018 -> Front door + Rear door BMW X3 (F25) 2010 – 2017 Front door + Rear door BMW X3 (G01) 2017 -> Front door + Rear door BMW X4 (F26) 2014 – 2018 Front door + Rear door + Headliner / Pillar BMW X4 (G02) 2018 -> Front door + Rear door BMW X4 (G02FL) 2018 -> Front door + Rear door BMW Z4 (G29) 2018 -> Front door + Rear door BMW MINI (F54) 2016 -> Front door + Rear door BMW MINI (F55) 2014 -> Front door + Rear door BMW MINI (F56) 2014 -> Front door + Rear door BMW MINI (F57) 2016 -> Front door + Rear door Rolls-Royce Coupe 2011-2016 Rolls-Royce Cullinan 2017+ Rolls-Royce Dawn 2015+ Rolls-Royce Drophead 2011-2016 Rolls-Royce Ghost 2008+ Rolls-Royce Phantom 2011+ Rolls-Royce Wraith 2012+ Toyota Supra 2019+ Legendary Products & Support From Authorized Dealers When you choose Phoenix Gold, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Phoenix Gold dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Phoenix Gold's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Phoenix Gold dealer today!

Read more less

Built-In Bluetooth For Hands-Free Phone Calls & Wireless Audio Streaming!10" Multimedia Receiver with Wireless Apple CarPlay & Android AutoThe Aerpro AMNI15 10" Multimedia Receiver with Wireless Apple CarPlay and Android Auto suits Nissan Navara (2019-2023) vehicles with 360 degree camera system (without factory navigation). Featuring a large 10" capacitive touchscreen display, this Multimedia Receiver has Apple CarPlay and Android Auto which can be used wireless or wired, built-in Bluetooth for hands-free phone calls & wireless audio streaming, rear USB input as well as an AM/FM radio tuner.Sound quality is superb with 40Wx4 max output, 8 band graphic EQ and time alignment capabilities, amplifiers can be added to the system via the 4V/5CH RCA preouts. Supplied as a complete Head Unit Upgrade Kit, the Aerpro AMNI15 includes all the parts required to complete the installation and retains important vehicle features including steering wheel controls, USB input, AUX input and the factory 360 degree camera system.Hema Maps ReadyExperience seamless on-road and off-road navigation through the head unit display by adding the optional Aerpro AMHXD3 On-Road / Off-Road Navigation Module (sold separately).Important Information: Head Unit Upgrade Kits can vary between vehicle models, please use the Aerpro What Fits Your Car Guide to find the correct parts. 360 Degree Camera Retention uses the reverse camera input of the head unit. USB Input Retention uses the USB input on the rear of the head unit. AUX Input Retention uses the RCA AUX input on the rear of the head unit. Includes switchable camera viewing modes with the handy factory-style button Vehicle Feature Retention: Steering Wheel Controls: Yes (including phone button) Factory Reverse Camera: Yes 360 Degree System AUX Input: Yes USB Input: Yes Parking Tones: N/A Factory Amplifier: N/A Vehicle Menu: Yes (clock settings) Other: N/A Features: To suit Nissan Navara (2019-2023) vehicles with 360 degree camera system (without factory navigation) Includes all the parts required to complete the installation and to retain important vehicle features Apple CarPlay & Android Auto (wireless / wired) Hema Maps Ready, experience seamless on-road and off-road navigation through the head unit display (optional AMHXD3 required, sold separately) Large 10" capacitive touchscreen display Steering wheel control (including phone button), USB input, AUX input and factory 360 degree camera retention Bluetooth with external microphone included (A2DP, AVRCP, HFP, PBAP) AM / FM Tuner with RDS & presets (18FM/12AM) Rear USB input (1.5A max charging) Reverse camera input (AHD 720P compatible) & rear A/V input 40Wx4 Max with 8 band graphic EQ and time alignment capabilities 4V/5CH RCA Preout and subwoofer level control Specifications: LCD Display:Size: 10"Resolution: 1024x600Touch Screen: Capacitive (G+G) System Specifications:OS System / CPU: Linux 3.4.5 / SPHE8368URAM / Flash Memory: 128MB / 256MB DIN Size: 2 DIN Short Body Power Output:Rated Power (4 Ohm @ 14.4 V, 1 kHz, THD 10 %): 4CH x 25WMAX Power (4 Ohm): 4CH x 40WMedia Playback: MP3 / AAC / FLAC / Xvid / MPEG 1, 2, 4 Device Ports:USB (Rear) Playback Formats: CPAA & MediaUSB (Rear) Power - Voltage/Amps: 5V/1.5AUSB MAX Capability: FAT32_32GB Aux Inputs / Outputs:Rear A/V Input (RCA Type - 3pcs): YesComposite Video Outputs: YesReverse Camera Input: Yes (720P AHD Compatible) Smartphone Connectivity: CarPlay & Android Auto (Wireless and Wired) Bluetooth:Bluetooth Built-In: Yes (A2DP, AVRCP, HFP, PBAP)Bluetooth Version: V4.2+EDRMicrophone: Built-in & External MicrophoneID3 Tag/Information (Artist, Album, Song): YesHFP Profile (1.2, 1.4 or HD Voice 1.6): HFP 1.6 Tuner:AM/FM (# of Presets): AM 12 (6X2) / FM 18 (6X3)FM Frequency Span (MHz): 87.5-108.0MHz (0.05MHz Step)AM Frequency Span (KHz): 529-1629KHz (9KHz Step)RDS: YesFM Antenna Connector Impedance: 50 OhmFM Tuner Connector: Motorola RCA Preamp Outputs:RCA Preamp Output: 2-Pair (Front / Rear)Subwoofer RCA Output: YesSubwoofer Level Control: YesPreamp Voltage (1.2,2,4,5,6): 4V p-p Tone Control:8 Band: 8 Band (50/200/400/800/1K/3K/7K/15K)Loudness: YesLPF - Frequencies (Sub): Yes8 Preset EQs: Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft Other Features:Steering Wheel Control: Yes, with Aerpro SWC AdaptorOSD Language: EnglishLED Colour (Buttons / Keys): White Accessories:Power Harness: Yes with ISO/3.5mm jackAV-In Cable (RCA with Audio L/R, Video In): YesReverse Camera Input (with 12V power supply to the camera): Yes4.1CH Audio Out Cable: YesExternal Microphone: Included Vehicle Compatibility: Nissan Navara 2019- D23 Nissan X-Trail 2014-2022 T32 Kit Inclusions: AM10X Multimedia Receiver Gloss Black Facia Kit Steering Wheel Control Interface Harness (with Camera, AUX & USB Retention) SWC Patch Lead Antenna Adaptor Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Built-In Bluetooth For Hands-Free Phone Calls & Wireless Audio Streaming!10" Multimedia Receiver with Wireless Apple CarPlay & Android AutoThe Aerpro AMNI14 10" Multimedia Receiver with Wireless Apple CarPlay and Android Auto suits Nissan Navara (2019-2023) vehicles with factory navigation and 360 degree camera system. Featuring a large 10" capacitive touchscreen display, this Multimedia Receiver has Apple CarPlay and Android Auto which can be used wireless or wired, built-in Bluetooth for hands-free phone calls & wireless audio streaming, rear USB input as well as an AM/FM radio tuner.Sound quality is superb with 40Wx4 max output, 8 band graphic EQ and time alignment capabilities, amplifiers can be added to the system via the 4V/5CH RCA preouts. Supplied as a complete Head Unit Upgrade Kit, the Aerpro AMNI14 includes all the parts required to complete the installation and retains important vehicle features including steering wheel controls, USB input, AUX input and the factory 360 degree camera system.Hema Maps ReadyExperience seamless on-road and off-road navigation through the head unit display by adding the optional Aerpro AMHXD3 On-Road / Off-Road Navigation Module (sold separately).Important Information: Head Unit Upgrade Kits can vary between vehicle models, please use the Aerpro What Fits Your Car Guide to find the correct parts. 360 Degree Camera Retention uses the reverse camera input of the head unit. USB Input Retention uses the USB input on the rear of the head unit. AUX Input Retention uses the RCA AUX input on the rear of the head unit. Includes switchable camera viewing modes with the handy factory-style button Vehicle Feature Retention: Steering Wheel Controls: Yes (including phone button) Factory Reverse Camera: Yes 360 Degree System AUX Input: Yes USB Input: Yes Parking Tones: N/A Factory Amplifier: N/A Vehicle Menu: Yes (clock settings) Other: N/A Features: To suit Nissan Navara (2019-2023) vehicles with factory navigation and 360 degree camera system Includes all the parts required to complete the installation and to retain important vehicle features Apple CarPlay & Android Auto (wireless / wired) Hema Maps Ready, experience seamless on-road and off-road navigation through the head unit display (optional AMHXD3 required, sold separately) Large 10" capacitive touchscreen display Steering wheel control (including phone button), USB input, AUX input and factory 360 degree camera retention Bluetooth with external microphone included (A2DP, AVRCP, HFP, PBAP) AM / FM Tuner with RDS & presets (18FM/12AM) Rear USB input (1.5A max charging) Reverse camera input (AHD 720P compatible) & rear A/V input 40Wx4 Max with 8 band graphic EQ and time alignment capabilities 4V/5CH RCA Preout and subwoofer level control Specifications: LCD Display:Size: 10"Resolution: 1024x600Touch Screen: Capacitive (G+G) System Specifications:OS System / CPU: Linux 3.4.5 / SPHE8368URAM / Flash Memory: 128MB / 256MB DIN Size: 2 DIN Short Body Power Output:Rated Power (4 Ohm @ 14.4 V, 1 kHz, THD 10 %): 4CH x 25WMAX Power (4 Ohm): 4CH x 40WMedia Playback: MP3 / AAC / FLAC / Xvid / MPEG 1, 2, 4 Device Ports:USB (Rear) Playback Formats: CPAA & MediaUSB (Rear) Power - Voltage/Amps: 5V/1.5AUSB MAX Capability: FAT32_32GB Aux Inputs / Outputs:Rear A/V Input (RCA Type - 3pcs): YesComposite Video Outputs: YesReverse Camera Input: Yes (720P AHD Compatible) Smartphone Connectivity: CarPlay & Android Auto (Wireless and Wired) Bluetooth:Bluetooth Built-In: Yes (A2DP, AVRCP, HFP, PBAP)Bluetooth Version: V4.2+EDRMicrophone: Built-in & External MicrophoneID3 Tag/Information (Artist, Album, Song): YesHFP Profile (1.2, 1.4 or HD Voice 1.6): HFP 1.6 Tuner:AM/FM (# of Presets): AM 12 (6X2) / FM 18 (6X3)FM Frequency Span (MHz): 87.5-108.0MHz (0.05MHz Step)AM Frequency Span (KHz): 529-1629KHz (9KHz Step)RDS: YesFM Antenna Connector Impedance: 50 OhmFM Tuner Connector: Motorola RCA Preamp Outputs:RCA Preamp Output: 2-Pair (Front / Rear)Subwoofer RCA Output: YesSubwoofer Level Control: YesPreamp Voltage (1.2,2,4,5,6): 4V p-p Tone Control:8 Band: 8 Band (50/200/400/800/1K/3K/7K/15K)Loudness: YesLPF - Frequencies (Sub): Yes8 Preset EQs: Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft Other Features:Steering Wheel Control: Yes, with Aerpro SWC AdaptorOSD Language: EnglishLED Colour (Buttons / Keys): White Accessories:Power Harness: Yes with ISO/3.5mm jackAV-In Cable (RCA with Audio L/R, Video In): YesReverse Camera Input (with 12V power supply to the camera): Yes4.1CH Audio Out Cable: YesExternal Microphone: Included Vehicle Compatibility: Nissan Navara 2019 - D23 Nissan X-Trail 2014 - 2022 T32 Kit Inclusions: AM10X Multimedia Receiver Gloss Black Facia Kit Steering Wheel Control Interface Harness (with Camera, AUX & USB Retention) SWC Patch Lead Antenna Adaptor Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

"Get Connected" with Our Range of Cables, Leads and Adaptors Universal ISO Connecters and Extension Cables Will Suit European Cars and Any of Our Other ISO Harnesses. Universal Steering Wheel Control Adapters Are Programmable to Most Vehicles. Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Reliable Marine Communications with a Genuine GME 27MHz Antenna Whip Product Overview The GME AW364HB 1200mm Marine 27MHz Antenna Whip is a genuine replacement antenna engineered to provide dependable marine communications in Australia's demanding coastal and offshore environments. Featuring a durable black fibreglass radome, it is built to withstand harsh marine conditions while delivering reliable performance with compatible 27MHz marine radio systems. Designed with a ground independent construction, the AW364HB is compatible with GME's complete range of 27MHz marine radios, making it an excellent choice for recreational boats, fishing vessels and commercial marine applications. A white version (AW364H) is also available for those who prefer a lighter finish. Please Note: Due to the length of this item, additional freight charges may apply to some delivery locations. Key Specifications Genuine GME marine antenna whip Designed for 27MHz marine communications Black fibreglass radome Ground independent design Length: 1200mm Compatible with GME 27MHz marine radios White version available (AW364H) Features & Benefits Designed for 27MHz marine communications – Optimised for reliable operation with compatible GME marine radio systems. Black fibreglass radome – Provides outstanding durability and corrosion resistance in harsh marine environments. Ground independent design – Allows flexible installation without requiring a conventional ground plane. 1200mm antenna length – Offers an excellent balance between communication performance and practical installation. Built for Australian waters – Designed to perform in demanding coastal, offshore and recreational boating conditions. Genuine GME quality – Manufactured to integrate seamlessly with compatible GME marine communication equipment. Technical Specs Specification Details Brand GME Model AW364HB Product Type Marine 27MHz Antenna Whip Frequency 27MHz Length 1200mm Radome Material Black Fibreglass Ground Plane Ground Independent Compatible Radios GME 27MHz Marine Radios Application Marine Communications Compatible With / Goes Well With GME 27MHz marine radios Recreational boats Fishing boats Commercial vessels Marine antenna mounting systems Compatibility should always be confirmed with your specific marine radio and mounting hardware before purchase. Weight Not specified. Frequently Asked Questions Is this antenna compatible with all GME marine radios? The AW364HB is designed for use with GME's range of 27MHz marine radios. Always confirm compatibility with your specific radio model before purchasing. Can this antenna be installed without a ground plane? Yes. The ground independent design provides greater flexibility for marine installations. Is this a complete antenna assembly? No. This product includes the antenna whip only. Compatible mounting hardware and a suitable base assembly are required if not already installed. Is there a white version available? Yes. GME also offers a white version of this antenna, the AW364H. Why might additional freight charges apply? Due to the 1200mm length of the antenna, oversized freight charges may apply to some regional and remote delivery locations. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

High-Quality Accessories To Suit A Wide Variety Of Applications For over 60 years GME has designed and manufactured an extensive range of high-quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need. Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized GME dealer today!

Read more less

GME XRS-RJ45R4 Pass-Through Adaptor Isuzu Red LED A pass-through adaptor for GME XRS Connect UHF CB radios, the XRS-RJ45R4 integrates an XRS Connect controller microphone directly into a factory blank switch location on selected Isuzu models, featuring a CAT.6 compliant fully-shielded housing, red LED back-light, and Australian made construction. Product Overview The GME XRS-RJ45R4 is part of GME's accessory range complementing their XRS Connect UHF CB radios. The pass-through adaptor allows an XRS Connect controller microphone to be integrated directly into a range of blank OEM switch locations on selected Isuzu models, providing a neat and professional finish that looks factory fitted rather than aftermarket. Featuring a CAT.6 compliant, fully-shielded housing with internal supports, the XRS-RJ45R4 ensures an extremely stable connection for trouble-free communication. The red LED back-light illuminates the switch, and installation is a simple two-wire connection, with the red wire connected to the existing 12V dash light circuit and the black wire to the negative circuit. The adaptor is made in Australia. Features & Benefits Integrates with Existing Factory Switches: The XRS-RJ45R4 integrates directly into a blank OEM switch location on selected Isuzu models, giving the XRS Connect controller microphone a neat, professional, factory-look finish. CAT.6 Compliant Fully-Shielded Housing: The fully-shielded, CAT.6 compliant housing with internal supports ensures an extremely stable connection for reliable, trouble-free UHF communication. Red LED Back-Light: The red LED back-light illuminates the switch for clear visibility on the factory dash. Simple Two-Wire Installation: Connect the red wire to the existing 12V dash light circuit and the black wire to the negative circuit for straightforward fitment. Made in Australia: The XRS-RJ45R4 is manufactured in Australia to GME's quality standards. Compatible with Other 8 Pin RJ45 UHF Radios: Beyond XRS Connect, the adaptor is also compatible with other UHF CB radios using an 8 pin RJ45 connection. Technical Specs Specification Detail SKU XRS-RJ45R4 Brand GME Description RJ45 Pass-Through Adaptor Type 4 (Red) for Isuzu LED Colour Red Connector Type 8 Pin RJ45 Housing CAT.6 Compliant, Fully-Shielded Wiring 2 Wire (Red - 12V Dash Light Circuit, Black - Negative) Country of Origin Australia Suits XRS Connect UHF CB Radios and Other 8 Pin RJ45 UHF Radios In the Box Adaptor Only Compatible With The XRS-RJ45R4 is compatible with the following Isuzu models per GME's compatibility matrix: D-Max 2nd Generation (2012-2020) and MU-X 1st Generation (2012-2021), both fitting the lower switch fascia under the A/C controls where fitted. It is also compatible with other UHF CB radios using an 8 pin RJ45 connection. Confirm your vehicle model and year, and check that your vehicle has the lower switch fascia fitted, before purchase. Frequently Asked Questions What does the XRS-RJ45R4 do? The XRS-RJ45R4 lets an XRS Connect controller microphone be integrated into a factory blank switch location on selected Isuzu models, giving a neat, factory-look finish instead of a dash-mounted mic. Which Isuzu models does it suit? Per GME's compatibility matrix, the XRS-RJ45R4 suits the D-Max 2nd Generation (2012-2020) and MU-X 1st Generation (2012-2021), both at the lower switch fascia under the A/C controls where fitted. Can it be used with other UHF radios? Yes. Beyond GME's XRS Connect range, the XRS-RJ45R4 is also compatible with other UHF CB radios that use an 8 pin RJ45 connection. How does the red LED back-light work? The red LED back-light is wired via a simple two-wire installation, with the red wire connected to the existing 12V dash light circuit and the black wire to the negative circuit. Is there a white LED version available? Yes. GME also offers the XRS-RJ45W4, the same pass-through adaptor with a white LED back-light instead of red, for the same range of Isuzu models. Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized GME dealer today!

Read more less

GME XRS-RJ45W4 Pass-Through Adaptor Isuzu White LED A pass-through adaptor for GME XRS Connect UHF CB radios, the XRS-RJ45W4 integrates an XRS Connect controller microphone directly into a factory blank switch location on selected Isuzu models, featuring a CAT.6 compliant fully-shielded housing, white LED back-light, a compact 42.5 x 23mm size, and Australian made construction. Product Overview The GME XRS-RJ45W4 is part of GME's accessory range complementing their XRS Connect UHF CB radios. The pass-through adaptor allows an XRS Connect controller microphone to be integrated directly into a range of blank OEM switch locations on selected Isuzu models, providing a neat and professional finish that looks factory fitted rather than aftermarket. Featuring a CAT.6 compliant, fully-shielded housing with internal supports, the XRS-RJ45W4 ensures an extremely stable connection for trouble-free communication. The white LED back-light illuminates the switch to match factory switch illumination, and installation is a simple two-wire connection, with the red wire connected to the existing 12V dash light circuit and the black wire to the negative circuit. The compact 42.5 x 23mm adaptor is made in Australia. Features & Benefits Integrates with Existing Factory Switches: The XRS-RJ45W4 integrates directly into a blank OEM switch location on selected Isuzu models, giving the XRS Connect controller microphone a neat, professional, factory-look finish. CAT.6 Compliant Fully-Shielded Housing: The fully-shielded, CAT.6 compliant housing with internal supports ensures an extremely stable connection for reliable, trouble-free UHF communication. White LED Back-Light: The white LED back-light illuminates to match white factory switch illumination, keeping the dash lighting consistent. Compact 42.5 x 23mm Size: The compact adaptor size fits neatly into the factory blank switch location without disrupting the surrounding dash layout. Simple Two-Wire Installation: Connect the red wire to the existing 12V dash light circuit and the black wire to the negative circuit for straightforward fitment. Made in Australia: The XRS-RJ45W4 is manufactured in Australia to GME's quality standards. Compatible with Other 8 Pin RJ45 UHF Radios: Beyond XRS Connect, the adaptor is also compatible with other UHF CB radios using an 8 pin RJ45 connection. Technical Specs Specification Detail SKU XRS-RJ45W4 Brand GME Description RJ45 Pass-Through Adaptor Type 4 (White) for Isuzu LED Colour White Connector Type 8 Pin RJ45 Housing CAT.6 Compliant, Fully-Shielded Size 42.5 x 23mm Wiring 2 Wire (Red - 12V Dash Light Circuit, Black - Negative) Country of Origin Australia Suits XRS Connect UHF CB Radios and Other 8 Pin RJ45 UHF Radios In the Box Adaptor Only Compatible With The XRS-RJ45W4 is compatible with the following Isuzu models per GME's compatibility matrix: D-Max 2nd Generation (2012-2020) and MU-X 1st Generation (2012-2021), both fitting the lower switch fascia under the A/C controls where fitted. It is also compatible with other UHF CB radios using an 8 pin RJ45 connection. Confirm your vehicle model and year, and check that your vehicle has the lower switch fascia fitted, before purchase. Frequently Asked Questions What does the XRS-RJ45W4 do? The XRS-RJ45W4 lets an XRS Connect controller microphone be integrated into a factory blank switch location on selected Isuzu models, giving a neat, factory-look finish instead of a dash-mounted mic. Which Isuzu models does it suit? Per GME's compatibility matrix, the XRS-RJ45W4 suits the D-Max 2nd Generation (2012-2020) and MU-X 1st Generation (2012-2021), both at the lower switch fascia under the A/C controls where fitted. Can it be used with other UHF radios? Yes. Beyond GME's XRS Connect range, the XRS-RJ45W4 is also compatible with other UHF CB radios that use an 8 pin RJ45 connection. How does the white LED back-light work? The white LED back-light is wired via a simple two-wire installation, with the red wire connected to the existing 12V dash light circuit and the black wire to the negative circuit, illuminating in white to match factory switch lighting. Is there a coloured LED version available? Yes. GME also offers the XRS-RJ45R4, the same pass-through adaptor with a red LED back-light instead of white, for the same range of Isuzu models. Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Brand Beast today!

Read more less

UHF Antenna Bonnet Bracket To Suit Chev Silverado 2500 2020+ Designed to mount directly to the driver's side bonnet hinges for the Chevrolet Silverado 2500 2020-on, these brackets do not require drilling or relocating of your OEM equipment, allowing you to reverse the installation anytime. They also will not inhibit the opening of the bonnet or the free operation of your windscreen wipers, providing a sleek and sturdy mount for your UHF radio antenna without the hassle associated with figuring out how to attach a standard universal-style bracket. Note: this kit is not compatible with aftermarket bonnet strut kits. Compatibility: Driver Side Chev Silverado 2500 2020+ Legendary Products & Support From Authorized Dealers When you choose GMF4X4, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GMF4X4 dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GMF4X4's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized GMF4X4 dealer today!

Read more less

GME XRS-RJ45R10 Pass-Through Adaptor Toyota Landcruiser 79 Red LED A pass-through adaptor for GME XRS Connect UHF CB radios, the XRS-RJ45R10 integrates an XRS Connect controller microphone directly into a factory blank switch location on the Toyota Landcruiser 79 Series (2021-Current), featuring a CAT.6 compliant fully-shielded housing and a red LED back-light. Product Overview The GME XRS-RJ45R10 allows an XRS Connect controller microphone to be integrated directly into a blank OEM switch location on the Toyota Landcruiser 79 Series from 2021 onwards. This provides a neat and professional finish that looks factory fitted rather than aftermarket. Featuring a CAT.6 compliant, fully-shielded housing with internal supports, the XRS-RJ45R10 ensures an extremely stable connection for trouble-free communication. The red LED back-light illuminates the switch, and installation is a simple two-wire connection, with the red wire connected to the existing 12V dash light circuit and the black wire to the negative circuit. The adaptor is made in Australia. Features & Benefits Integrates with Existing Factory Switches: The XRS-RJ45R10 integrates directly into a blank OEM switch location on the Landcruiser 79 Series, giving the XRS Connect controller microphone a neat, professional, factory-look finish. CAT.6 Compliant Fully-Shielded Housing: The fully-shielded, CAT.6 compliant housing with internal supports ensures an extremely stable connection for reliable, trouble-free UHF communication. Red LED Back-Light: The red LED back-light illuminates the switch for clear visibility on the factory dash. Simple Two-Wire Installation: Connect the red wire to the existing 12V dash light circuit and the black wire to the negative circuit for straightforward fitment. Made in Australia: The XRS-RJ45R10 is manufactured in Australia to GME's quality standards. Compatible with Other 8 Pin RJ45 UHF Radios: Beyond XRS Connect, the adaptor is also compatible with other UHF CB radios using an 8 pin RJ45 connection. Technical Specs Specification Detail SKU XRS-RJ45R10 Brand GME Description RJ45 Pass-Through Adaptor Type 10 (Red) for Toyota Landcruiser 79 Series LED Colour Red Connector Type 8 Pin RJ45 Housing CAT.6 Compliant, Fully-Shielded Wiring 2 Wire (Red - 12V Dash Light Circuit, Black - Negative) Country of Origin Australia Suits XRS Connect UHF CB Radios and Other 8 Pin RJ45 UHF Radios In the Box Adaptor Only Compatible With The XRS-RJ45R10 is compatible with the Toyota Landcruiser 79 Series (2021-Current). It is also compatible with other UHF CB radios using an 8 pin RJ45 connection. Confirm your vehicle model and year before purchase. Frequently Asked Questions What does the XRS-RJ45R10 do? The XRS-RJ45R10 lets an XRS Connect controller microphone be integrated into a factory blank switch location on the Toyota Landcruiser 79 Series, giving a neat, factory-look finish instead of a dash-mounted mic. Which vehicles does it suit? The XRS-RJ45R10 is compatible with the Toyota Landcruiser 79 Series from 2021 onwards. Can it be used with other UHF radios? Yes. Beyond GME's XRS Connect range, the XRS-RJ45R10 is also compatible with other UHF CB radios that use an 8 pin RJ45 connection. How does the red LED back-light work? The red LED back-light is wired via a simple two-wire installation, with the red wire connected to the existing 12V dash light circuit and the black wire to the negative circuit. Is there a white LED version available? Yes. GME also offers the XRS-RJ45W10, the same pass-through adaptor with a white LED back-light instead of red, for the same Landcruiser 79 Series fitment. Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized GME dealer today!

Read more less