Victron Energy Orion IP67 24/12-20A Fully Encapsulated. Pre-Cabled. Built for Where Others Won't Go. Product Overview The Victron Energy Orion IP67 24/12-20A (ORI241220260) is a compact, fully encapsulated DC-DC step-down converter rated at 20 amps and 240 watts continuous, converting a 24V DC source to a regulated 12V DC output. Unlike conventional converter units housed in open-frame or vented enclosures, the ORI241220260 is constructed from cast aluminium with electronics moulded in resin completely sealed against water, oil, dirt, shock, and ignition hazards with no external enclosure required. What makes this unit stand out in practical installations is the combination of its IP67 encapsulation, extra-long 1.8-metre input and output cables, and a wide 15–40V input range. The pre-fitted cables eliminate the need for intermediate connections in the majority of installs an important reliability advantage in demanding environments where every additional junction is a potential failure point. The wide input range handles voltage fluctuations from a partially discharged 24V bank through surge conditions from other loads on the same circuit, maintaining stable 12V output throughout. Built-in overheating protection means the unit can be installed in confined, high-temperature locations machine rooms, engine bays, and underbonnet spaces without thermal cutout concerns under normal operating conditions. Key Specifications Part Number: ORI241220260 Converter Type: Non-isolated DC-DC step-down Input Voltage Range: 15–40V DC Output Voltage: 12V DC Output Current: 20A Output Power: 240W continuous IP Rating: IP67 — dustproof and waterproof to 1 metre depth Enclosure: Cast aluminium, electronics moulded in resin Cable Length: 1.8 metres (input and output) Ignition Protected: Yes Overheating Protection: Yes Isolation: Non-isolated (input and output negatives shared) Features & Benefits Completely Encapsulated Construction — Cast aluminium housing with resin-moulded internal electronics. Water, oil, and dirt cannot penetrate the unit. Shockproof and ignition-protected as standard — no separate enclosure, no IP-rated cabinet, no additional cost or complexity. This is the converter you specify when the environment is genuinely hostile. IP67 Weatherproof Rating — Fully dustproof (IP6x) and protected against water immersion between 15cm and 1 metre depth (IPx7). Suitable for direct mounting in bilges, underbonnet compartments, underfloor chassis locations, marine bulkheads, and outdoor plant equipment — locations where a standard IP20 converter would fail or require a protective housing. Ignition Protected — Safe for installation in environments where flammable vapours may be present — petrol engine bays, fuel storage areas, and marine bilges with petrol engines. A critical compliance and safety specification often overlooked in converter selection. 1.8-Metre Pre-Fitted Input and Output Cables — Factory-fitted cables of 1.8 metres eliminate intermediate connections in most installations. Every additional junction in a high-current DC circuit is a potential source of resistance, heat, and failure — particularly in environments subject to vibration, moisture, and temperature cycling. Fewer junctions means better reliability, lower voltage drop, and less installation labour. Wide Input Voltage Range: 15–40V DC — Broader than the standard 18–35V range found on many 24V converters, the 15–40V window handles aggressive voltage sags during heavy engine starting or high load events, and accommodates higher absorption/equalisation voltages from some charger and alternator types without triggering an over-voltage shutdown. Stable Output Through Input Fluctuations — The wide input range ensures the 12V output remains stable and regulated when other high-draw equipment on the same 24V bus causes voltage sags or surges — important in shared electrical systems on trucks, vessels, and plant equipment. Overheating Protection — Built-in thermal protection allows the unit to operate safely in hot environments including machine rooms, enclosed engine bays, and confined equipment spaces. The converter manages its own thermal limits without requiring external thermal management or ventilation clearance. Compact 240W Output — At 20A / 240W, the ORI241220260 is the right-sized solution for dedicated 12V accessory circuits, auxiliary loads, communications equipment, lighting circuits, and small battery top-up applications running off a 24V primary source — without the overspecification and cost of a 70A or 100A unit. Non-Isolated Design — Input and output negatives are shared, which is the appropriate and efficient topology for the majority of automotive, marine, and off-grid 24V-to-12V conversion applications where galvanic isolation is not required. Technical Specs Specification Detail Part Number ORI241220260 Converter Type Non-isolated DC-DC step-down Input Voltage Range 15–40V DC Output Voltage 12V DC Output Current 20A Output Power 240W continuous IP Rating IP67 IP67 — Dust Protection Dustproof (IP6x — fully sealed) IP67 — Water Protection Immersion to 1 metre depth (IPx7) Enclosure Material Cast aluminium Internal Construction Electronics moulded in resin Cable Length 1.8 metres (input and output, pre-fitted) Ignition Protected Yes Overheating Protection Yes Isolation Non-isolated (input/output negatives shared) Compatible With / Goes Well With Applications: 24V trucks and heavy vehicles powering 12V accessories, communications, or lighting Marine vessels — 24V primary bank to 12V electronics, navigation, or cabin loads (bilge-mount capable) Off-road and expedition vehicles requiring underbonnet or underfloor converter mounting Agricultural and mining equipment with exposed or confined mounting locations Plant and industrial equipment in machine room or engine bay environments Camper trailers towed by 24V vehicles requiring a compact 12V supply Complementary Victron Products: Victron SmartShunt or BMV-712 (battery monitoring) Victron Cerbo GX (system integration and remote monitoring) Victron MPPT Solar Charge Controllers (system pairing) Victron MultiPlus or Quattro inverter-chargers (system integration) Frequently Asked Questions Why does this converter come with 1.8-metre pre-fitted cables instead of terminals or connectors? In IP67 applications — bilges, underbonnet spaces, outdoor plant — every cable junction is a potential ingress point and failure risk. Pre-fitted 1.8-metre cables eliminate the need for intermediate connections in most installs, improving reliability and reducing installation time in the environments where this unit is most commonly used. What does ignition protection mean and do I need it for my installation? Ignition protection means the converter is safe for use in areas where flammable fuel vapours may be present — petrol engine bays, fuel storage compartments, and bilges on petrol-engine vessels. If your installation is in or near a fuel vapour risk zone, ignition protection is a safety and compliance requirement, not just a feature. What is the input voltage range and why is 15–40V wider than most 24V converters? The ORI241220260 operates across 15–40V DC — broader than the 18–35V range on many 24V converters. This accommodates aggressive voltage sags during engine starting or heavy load events at the low end, and higher absorption or equalisation voltages from certain chargers and alternators at the top end, without the converter dropping out or triggering over-voltage protection. Can this converter be mounted directly in a bilge or wet outdoor location? Yes. The IP67 rating and fully encapsulated cast aluminium construction make it suitable for direct mounting in bilges, wet bays, underfloor chassis locations, and outdoor plant environments where water immersion to one metre depth is a realistic scenario. No additional waterproof enclosure is required. Is the ORI241220260 suitable for a marine installation on a vessel with a petrol engine? The IP67 rating and ignition-protected construction make it physically and safety-qualified for this application. However, this is a non-isolated converter — input and output negatives are shared. On petrol-engine vessels where galvanic isolation may be required to prevent stray current corrosion, the Victron Orion-Tr Smart Isolated range should be evaluated as an alternative. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy GX Touch 50 Display For Cerbo GX: Colour Display And Touch Panel Connects To The Cerbo Gx Controller For Local Display And ControlPanels and System MonitoringThe GX Touch 50 is the display monitor for the Cerbo GX. The 5" touch screen display gives an instant overview of your system and allows you to adjust settings in the blink of an eye.Simply connected to the Cerbo GX with the included HDMI/USB Cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.Simply MountedThe GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the ColorControl GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

12" Prime R1 Stamped Steel Mesh Grille Insert Black. Designed for Prime R1 Subwoofers with Removable Trim Ring. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate R1G-12 is a 12" stamped steel mesh grille insert in black designed for use with Prime R1 12" subwoofers that feature a removable trim ring. The grille inserts snugly into the R1 subwoofer's trim ring no additional hardware required. The trim ring (included with the subwoofer) holds the grille securely in position. Key Specifications Part number: R1G-12 Compatible size: 12 inch ✓ Compatible series: Prime R1 ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into R1 subwoofer trim ring ✓ Trim ring required: Yes — removable trim ring must be present on subwoofer ✓ Generation: Not specified (confirm compatible models with Rockford Fosgate) Protection: Surround and cone damage ✓ Compatible SKUs: Select Prime R1 12" subwoofers with removable trim ring — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Prime R1 Platform — Easy Integration The R1G-12 integrates directly into the R1 subwoofer's existing trim ring structure — a clean, factory-matched installation without aftermarket fabrication. Stamped Steel Mesh — Physical Cone and Surround Protection The rigid mesh shields the mica-injected polypropylene R1 cone from physical contact with boot cargo — preventing the cone and surround damage that occurs in unprotected installations. Trim Ring Insertion — Easy Install Remove the trim ring from the subwoofer, insert the grille, re-secure. No tools required. Fully reversible. Requires Removable Trim Ring The R1G-12 requires the subwoofer to have a removable trim ring — confirm this feature is present on your specific R1 12" model before purchasing. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R1G-12 Series Prime R1 Compatible Size 12 inch ✓ Compatible Series Prime R1 (removable trim ring models) ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment R1 subwoofer trim ring insertion ✓ Trim Ring Required Yes — must be removable type ✓ Generation Not specified Compatible SKUs Select R1 12" models with removable trim ring (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Prime R1 12" subwoofers with removable trim ring — confirm specific SKUs with Rockford Fosgate Frequently Asked Questions Does the trim ring come with the R1G-12? No — the grille inserts into the trim ring already on the R1 12" subwoofer. The R1G-12 is the grille insert only. The trim ring must be the removable type — confirm this with Rockford Fosgate for your specific R1 subwoofer model. How do I know if my R1 subwoofer has a removable trim ring? The product description specifies this grille is "designed for use with Prime R1 subwoofers with removable trim ring" — indicating not all R1 models may qualify. Confirm with Rockford Fosgate whether your specific R1 12" subwoofer SKU includes a removable trim ring. Can I use a Punch P1 grille (P1G-12) on an R1 subwoofer instead? No — the R1G-12 and P1G-12 use different trim ring dimensions corresponding to their respective subwoofer series. These are not interchangeable. Is the R1G-12 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate R1G-12 product page before ordering. Are grille inserts available for other R1 subwoofer sizes? Other R1G size variants (R1G-10, R1G-8) may be available — confirm the full R1G range with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PEQ Remote Punch EQ Bass and Treble Control from the Dash, Built for 2007+ Punch & Power Amplifiers Product Overview The Rockford Fosgate PEQ is a wired remote Punch equalisation controller designed for select 2007 and newer Rockford Fosgate Punch and Power amplifiers. Providing remote control of both bass and treble boost from a convenient dash, console, or glovebox mounting location, the PEQ gives the driver real-time tonal adjustment without accessing the amplifier particularly useful in systems where the amplifier is mounted in the boot, under the seat, or in another location where in-car adjustment is impractical. The PEQ offers up to +18 dB of bass boost at 45 Hz the signature Rockford Fosgate Punch EQ frequency and up to +12 dB of treble boost at 12.5 kHz, with bass and treble filtering behaviour determined by the in-board amplifier crossover setting. On 4-channel amplifiers, the PEQ controls bass on the rear outputs. The complete installation kit includes the bass/treble knob unit, cable, mounting clip, and mounting screws everything needed for a clean dash or console installation. Key Specifications Type: Wired remote bass and treble EQ controller Bass boost: 0 dB to +18 dB @ 45 Hz Treble boost: 0 dB to +12 dB @ 12.5 kHz Filter behaviour: Based on in-board amplifier crossover setting (HP / LP / AP) 4-channel amplifier use: Controls bass on rear outputs Compatible amplifiers: Select 2007 and newer Rockford Fosgate Punch and Power amplifiers Mounting options: Under-dash / centre console / glovebox Kit contents: Bass/treble knob unit, cable, mounting clip, mounting screws Cable length: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Remote bass boost 0 dB to +18 dB @ 45 Hz: The signature Rockford Fosgate Punch EQ frequency, adjustable from flat to a maximum +18 dB boost at 45 Hz from the driver's seat. Adjust bass emphasis on the fly to suit music genre, road noise, and passenger preference without leaving the seat or accessing the amplifier. Remote treble boost 0 dB to +12 dB @ 12.5 kHz: Independent treble boost control up to +12 dB at 12.5 kHz, complementing the bass control for comprehensive tonal adjustment from a single remote unit. Useful for compensating for high-frequency loss at elevated listening volumes or in acoustically challenging vehicle cabin environments. Filter behaviour linked to in-board amplifier crossover: The PEQ's bass and treble filtering operates in conjunction with the amplifier's internal crossover setting HP (high-pass), LP (low-pass), or AP (all-pass). This ensures the remote EQ adjustments remain appropriate to the speaker configuration connected to the amplifier rather than boosting frequencies outside the speaker's operating range. Controls rear output bass on 4-channel amplifiers: When used with a compatible 4-channel Rockford Fosgate Punch or Power amplifier, the PEQ provides dedicated bass control of the rear channel outputs useful for systems where the rear channels drive subwoofers or bass-emphasis speakers independently of the front channels. Convenient remote mounting under-dash, console, or glovebox: The compact PEQ unit installs cleanly under the dashboard, inside the centre console, or in the glovebox using the included mounting clip and screws  keeping the driver's reach-zone tidy while providing accessible real-time tonal control. Complete installation kit included: Bass/treble knob unit, cable, mounting clip, and mounting screws are all included. No additional accessory purchases required for a clean installation in most standard Australian vehicles. Wired reliability: A hardwired connection to the amplifier provides consistent, noise-free signal transmission without the latency or pairing issues of wireless remote solutions appropriate for a signal-path EQ control where accuracy and consistency matter. Technical Specs Specification Detail SKU PEQ Brand Rockford Fosgate Type Wired remote bass and treble EQ controller Bass Boost 0 dB to +18 dB @ 45 Hz Treble Boost 0 dB to +12 dB @ 12.5 kHz Filter Behaviour Based on in-board amplifier crossover (HP / LP / AP) 4-Channel Use Controls bass on rear outputs Compatible Amplifiers Select 2007 and newer Rockford Fosgate Punch and Power amplifiers Mounting Options Under-dash / centre console / glovebox Kit Contents Bass/treble knob, cable, mounting clip, mounting screws Cable Length Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Select 2007 and newer Rockford Fosgate Punch series amplifiers with PEQ input Select 2007 and newer Rockford Fosgate Power series amplifiers with PEQ input Amplifier installations where the amplifier is mounted in the boot, under the seat, or in another location away from the driver 4-channel amplifier builds where independent rear output bass control is required Vehicles where real-time tonal adjustment from the driver's position is a priority Frequently Asked Questions Which amplifiers is the PEQ compatible with? The PEQ is designed for select 2007 and newer Rockford Fosgate Punch and Power amplifiers. Not all amplifiers in these ranges include a PEQ input confirm that your specific amplifier model has a dedicated PEQ connector with your supplier before purchasing. What is the difference between the PEQ and the PLC2 remote level control? The PLC2 is a single-function remote subwoofer level control it adjusts output level only. The PEQ provides both bass boost (0 dB to +18 dB @ 45 Hz) and treble boost (0 dB to +12 dB @ 12.5 kHz) from a single wired remote unit, making it a more comprehensive tonal control solution. Confirm which remote accessory is compatible with your specific amplifier model before purchasing. How does the PEQ's filter behaviour interact with the amplifier's crossover? The PEQ's bass and treble boost operates within the frequency boundaries established by the amplifier's internal crossover setting. In low-pass mode, only the bass boost is active; in high-pass mode, only the treble boost is active; in all-pass mode, both bass and treble controls operate across the full frequency range. This prevents the remote EQ from boosting frequencies outside the speaker's crossover-defined operating range. Where can the PEQ be mounted in the vehicle? The PEQ includes a mounting clip and screws for under-dash, centre console, or glovebox installation. The compact form factor suits most standard Australian vehicle dash and console environments without custom fabrication. Does the PEQ kit include everything needed for installation? Yes. The PEQ ships with the bass/treble knob unit, cable, mounting clip, and mounting screws covering all hardware required for a standard installation. Confirm cable length with your supplier to ensure it reaches your amplifier from your intended mounting location. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

15" Punch P2 and P3 Stamped Steel Grille Insert Black. Fits Gen-3 P2 and P3 Trim Rings. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P2P3G-15 is a 15" stamped steel mesh grille insert in black designed for Gen-3 Punch P2 and P3 standard-depth 15" subwoofers. The grille inserts into the diamond-cut cast aluminium trim ring already fitted to the subwoofer no additional hardware required. The trim ring (included with the P2 or P3 subwoofer) holds the grille securely in position. Compatible with both the Punch P2 and Punch P3 15" platforms this single grille SKU covers both ranges. This grille is for standard-depth P2 and P3 15" subwoofers not the P3S shallow series, which uses the P3SG range. Compatible with Gen-3 trim rings specifically confirm the generation of your subwoofer before purchasing. Key Specifications Part number: P2P3G-15 Compatible size: 15 inch (standard depth) ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-3 P2 and P3 trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-3 P2 and P3 only ✓ Compatible series: Punch P2 and Punch P3 (15") ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-3 P2 and P3 15" models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Covers Both P2 and P3 15" Platforms A single grille SKU compatible with both the Punch P2 (P2D2-15, P2D4-15) and Punch P3 (P3D2-15, P3D4-15) 15" subwoofers — both series use the same Gen-3 trim ring dimensions. Confirm exact compatibility with Rockford Fosgate. Stamped Steel Mesh — Physical Cone and Surround Protection The rigid steel mesh shields the 15" Kevlar (P2) or anodised aluminium (P3) cone and rubber surround from physical contact with boot cargo. Boot installations with 15" subwoofers typically have limited clearance — the grille provides protection in these confined, high-traffic environments. Trim Ring Insertion — Tool-Free Install Remove the trim ring from the subwoofer, insert the grille, re-secure the trim ring. No tools required. Reversible at any point for inspection or cleaning. Gen-3 Specific Sizing Sized for Gen-3 P2 and P3 trim rings only — not compatible with earlier-generation trim rings or the P3S shallow series. Confirm your subwoofer's generation before purchasing. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2P3G-15 Series Punch P2 and P3 (Standard) Gen-3 Compatible Size 15 inch ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-3 P2 and P3 trim rings ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-3 P2 and P3 only ✓ Compatible Series Punch P2 and Punch P3 (15") ✓ Compatible SKUs Select Gen-3 models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-3 Punch P2 and P3 15" standard-depth subwoofers — confirm specific SKUs with Rockford Fosgate Likely compatible (confirm before purchasing): Rockford Fosgate P2D2-15 Punch P2 15" 2-Ohm DVC Subwoofer Rockford Fosgate P2D4-15 Punch P2 15" 4-Ohm DVC Subwoofer Rockford Fosgate P3D2-15 Punch P3 15" 2-Ohm DVC Subwoofer Rockford Fosgate P3D4-15 Punch P3 15" 4-Ohm DVC Subwoofer Frequently Asked Questions Does the trim ring come with the P2P3G-15? No — the grille inserts into the trim ring already supplied with the P2 or P3 15" subwoofer. The P2P3G-15 is the grille insert only. Is this grille compatible with both P2 and P3 15" subwoofers? Yes — the P2P3G-15 is confirmed compatible with both Gen-3 Punch P2 and Punch P3 15" subwoofers. Both series use the same Gen-3 trim ring dimensions. Confirm exact compatible SKUs with Rockford Fosgate. Will this grille fit P3S shallow subwoofers? No — the P3S shallow series uses a different trim ring and requires the P3SG range (P3SG-8, P3SG-10, P3SG-12). The P2P3G-15 is for standard-depth P2 and P3 subwoofers only. Is the P2P3G-15 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate P2P3G-15 product page before ordering. Are grille inserts available for 10" and 12" P2 and P3 subwoofers? Equivalent grille SKUs for 10" and 12" P2/P3 models may be available — confirm with Rockford Fosgate. The P2P3G-15 is specific to the 15" platform. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate T750X1bd Power 750W Class-BD Mono Amplifier High Efficiency, Ultra-Compact, Constant Power Product Overview The Rockford Fosgate T750X1bd is a 750 Watt mono amplifier from the flagship Power series, built on Rockford Fosgate's patented Class-BD technology platform combining the efficiency of Class-D topology with the sonic fidelity of Class-B to deliver 750W mono output in an ultra-compact chassis with significantly lower current draw than a conventional Class A/B amplifier of equivalent output. Designed for the broadest possible vehicle application range hybrid and electric vehicles, small cars, trucks, motorcycles, and side-by-side UTVs the T750X1bd is purpose-engineered for installations where high-output mono performance and compact dimensions are both non-negotiable. Proprietary low-impedance Constant Power technology ensures consistent, predictable output regardless of speaker impedance, and the configurable Molex-style input harness accepts both RCA and speaker-level signals with differential input circuitry that eliminates signal noise from the audio chain. Remote-Out converts the remote input terminal to an output when using speaker-level inputs triggering additional amplifiers without requiring a separate remote source from the vehicle. Real-time Rollback thermal protection, dual fan forced induction, dual extruded heatsinks, C.L.E.A.N. input/output clip detection, on-board Punch EQ, low-pass crossover, PLC2 remote level control compatibility, CEA-2006 and CE compliance, 8 AWG power connectors, upgraded RCA connectors, and discrete surface mount construction complete a mono amplifier built to perform reliably in every environment from marine vessels to electric vehicles. Key Specifications Channels: 1 (mono) Total power: 750W Circuit topology: Class-BD (patented) Constant Power: Yes low impedance Crossover: Built-in low-pass Punch EQ: Built-in patented boost circuit Inputs: Low-level RCA + high-level differential (configurable Molex-style harness) Auto Turn-On: Yes (via high-level input) Remote-Out: Yes (when using high-level inputs) RCA connectors: Upgraded Power connector: 8 AWG Speaker connector: 10 AWG C.L.E.A.N.: Input + output clip detection with LED indicators Thermal protection: Real-time thermal sensing with Rollback technology Cooling: Dual fan forced induction + dual extruded heatsinks + 3-stage thermal lock extrusion Remote level control: PLC2 compatible (sold separately) Control panel: Top-mounted Construction: Discrete surface mount technology CEA-2006 compliant: Yes CE compliant: Yes Rated power: Confirm with supplier Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Rockford Fosgate patented Class-BD technology: Class-BD combines Class-D switching efficiency with Class-B topology fidelity delivering high-efficiency mono output that draws significantly less current from the vehicle's charging system than a Class A/B amplifier of equivalent output, while maintaining the sonic accuracy associated with Class-B operation. A genuine advantage in vehicles with limited alternator capacity hybrid and electric vehicles, motorcycles, small cars, and UTVs where electrical system load management is a real constraint. Proprietary low-impedance Constant Power: Delivers consistent output across low impedance loads, ensuring predictable performance and maximising power delivery to the connected subwoofer regardless of impedance variation consistent with the Constant Power technology across the T-series and TM-series range. 750W mono in an ultra-compact chassis: High-output mono performance in a compact form factor designed for the restricted installation spaces of motorcycles, UTVs, small cars, and behind-dash vehicle locations where standard mono amplifier chassis dimensions create fitment challenges. Configurable Molex-style input harness RCA and speaker-level in one connector: The Molex-style harness accepts both low-level RCA and high-level speaker-level signals through the same configurable connector simplifying installation and reducing cable clutter compared to amplifiers requiring separate wiring runs for each input type. Suitable for factory OEM integration and aftermarket head unit connection from the same amplifier. Differential input circuitry for noise-free signal: Differential inputs reject common-mode noise and ground loop interference that standard single-ended inputs pass through to the audio signal particularly important in hybrid and electric vehicles where high-voltage electrical architecture commonly introduces interference. Also valuable in motorcycles and UTVs where long signal cable runs from dash to amplifier increase noise pickup. Remote-Out feature: When using high-level inputs, the remote input terminal converts to an output signal that triggers additional amplifiers or accessories eliminating the need to source a separate remote turn-on from the vehicle's electrical system. Particularly useful in factory OEM integrations where a dedicated remote wire is unavailable. Real-time thermal sensing with Rollback technology: Progressively reduces output power as temperatures approach the threshold rather than shutting down completely maintaining audio at a reduced level in extreme thermal conditions. Consistent with the TM500X1br and T1000X5ad in this catalogue a critical feature for UTV, motorcycle, and summer Australian installations. Dual fan forced induction with 3-stage thermal lock extrusion and dual extruded heatsinks: Active forced air cooling combined with a multi-stage passive heatsink provides comprehensive thermal management for 750W mono output in the compact chassis required for Element Ready vehicle applications. C.L.E.A.N. input and output clip detection with LED indicators: Simultaneous input and output THD monitoring for accurate gain structure setup and ongoing clip detection consistent with the Power series standard across this catalogue. Built-in low-pass crossover and Punch EQ boost circuit: On-board crossover and bass boost without external processors practical for compact installations where signal processor space is unavailable. Upgraded RCA connectors: Higher-quality connectors reducing signal degradation and improving long-term reliability in high-vibration UTV, motorcycle, and truck installations. 8 AWG power and 10 AWG speaker connectors: Appropriate wiring gauge connectors for the current demands of a 750W mono amplifier consistent with the TM500X1br specification in this catalogue. PLC2 remote level control compatible: Optional Rockford Fosgate PLC2 for dash-mounted subwoofer output level control with input clip indicator. Sold separately. CEA-2006 and CE compliant: Power ratings verified against the CEA-2006 industry standard. CE compliance confirms European safety and EMC conformity both are verified, comparable specifications. Discrete surface mount technology construction: Compact, vibration-resistant circuit board assembly contributing to both the ultra-compact chassis and long-term reliability in high-vibration motorcycle, UTV, and off-road installations. Technical Specs Specification Detail SKU T750X1bd Brand Rockford Fosgate Number of Channels 1 (mono) Total Power 750W Circuit Topology Class-BD (patented) Constant Power Yes low impedance Crossover Built-in low-pass Punch EQ Built-in patented boost circuit Signal Input Low-level RCA + high-level differential (Molex-style harness) Auto Turn-On Yes (via high-level input) Remote-Out Yes (when using high-level inputs) RCA Connectors Upgraded Power Connector 8 AWG Speaker Connector 10 AWG C.L.E.A.N. Input + output clip detection with LED indicators Thermal Protection Real-time thermal sensing with Rollback technology Cooling Dual fan forced induction + dual extruded heatsinks + 3-stage thermal lock extrusion Remote Level Control PLC2 compatible (sold separately) Control Panel Top-mounted Construction Discrete surface mount technology CEA-2006 Compliant Yes CE Compliant Yes Rated Power Confirm with supplier Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Hybrid and electric vehicles requiring OEM integration with noise-rejecting differential inputs Motorcycles, UTVs, side-by-sides, and powersport vehicles requiring compact 750W mono amplification Small cars, trucks, and vehicles with restricted amplifier installation space Factory and aftermarket head units with RCA or high-level outputs Rockford Fosgate Power and Punch series subwoofers rated for 750W mono input Downstream amplifiers triggered via Remote-Out in multi-amplifier system builds Optional Rockford Fosgate PLC2 Punch Level Control (sold separately) Vehicles where Class-BD current efficiency reduces alternator and battery system load Frequently Asked Questions What is Class-BD technology and how does it differ from Class-D and Class A/B? Class-BD is Rockford Fosgate's patented topology that combines Class-D switching efficiency with Class-B topology fidelity. Class-D alone delivers high efficiency but can introduce switching artefacts; Class A/B delivers sonic accuracy but at lower efficiency and higher current draw. Class-BD achieves both drawing significantly less current than a Class A/B amplifier of equivalent output while maintaining the sonic quality associated with Class-B operation. How does the Molex-style input harness work? The configurable Molex-style connector accepts both low-level RCA and high-level speaker-level signals through the same harness eliminating the need for separate wiring configurations depending on the source. This simplifies installation in OEM integration scenarios and reduces cable management complexity in confined installation spaces. What does the Remote-Out feature do? When the T750X1bd is connected via high-level inputs, the remote input terminal converts to an output that triggers additional amplifiers or accessories. This eliminates the need to source a separate remote turn-on signal from the vehicle particularly useful in hybrid, electric, and OEM factory system integrations where a dedicated remote wire is unavailable. How does the T750X1bd differ from the TM500X1br Power Marine mono amplifier? Both are compact mono amplifiers with Rollback thermal protection, dual fan cooling, C.L.E.A.N. I/O, and Remote-Out. The T750X1bd uses Class-BD technology and delivers 750W, while the TM500X1br uses Class-BR (Boosted Rail) technology and delivers 500W. The TM500X1br has marine-grade conformal PCB coating for permanent marine installation; the T750X1bd is designed for the broadest vehicle application range including hybrid, electric, UTV, and motorcycle. Choose based on your primary installation environment and power requirement. Is a remote level control included with the T750X1bd? No. The optional PLC2 Punch Level Control is sold separately and connects to the dedicated remote control input for subwoofer output level adjustment with input clip indicator from a convenient dash or mounting location. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Connect Third-Party CAN-Bus Batteries to Your Victron System VE.Can to CAN-Bus Type B, 5 Metre. Product Overview The Victron ASS030720150 is a 5-metre VE.Can to CAN-Bus BMS cable Type B designed to connect a third-party CAN-bus enabled lithium battery to a Victron power system. Type B is compatible with LG Chem, AXIstorage, BMZ, and Pylontech batteries, enabling direct communication between the battery's BMS and the Victron GX device or VE.Can network for integrated state of charge reporting, cell protection, and charge control. This is the correct cable for systems pairing a Victron GX device (Cerbo GX, CCGX, Venus GX) with one of the above-listed battery brands. A Type A cable is available separately for BYD battery compatibility. If you are unsure which cable type applies to your battery brand, consult the Victron manual referenced in the product description before purchasing the compatibility list is brand-specific and using the incorrect type will result in a non-functional connection. Key Specifications Cable type: VE.Can to CAN-Bus BMS — Type B Cable length: 5 metres Compatible batteries (Type B): LG Chem, AXIstorage, BMZ, Pylontech Compatible Victron interface: VE.Can network / Victron GX devices Type A compatibility (different cable): BYD batteries only Connector type: Not specified in supplier data — confirm with Victron Operating temperature: Not specified — confirm with Victron Weight: Not specified — confirm with Victron Warranty: Not specified — confirm with Victron Features & Benefits Direct BMS-to-GX Communication — Connects the CAN-bus interface of a supported third-party lithium battery directly to the Victron VE.Can network, enabling the GX device to read battery BMS data — including state of charge, cell voltages, temperature, and charge/discharge limits — and use this data to coordinate charging from Victron solar controllers, inverter/chargers, and DC-DC converters. 5 Metre Length — The 5m cable length allows flexible mounting of the battery and GX device in installations where proximity is not guaranteed — suitable for larger systems where the battery bank may be located in a separate compartment from the GX control hub. Type B — Confirmed Compatible Battery Brands — Specifically designed for LG Chem, AXIstorage, BMZ, and Pylontech batteries. These are among the most widely used third-party lithium battery brands in Australian caravan, off-grid, and marine Victron installations. Genuine Victron Accessory — Manufactured to Victron's interface specifications, ensuring correct pin assignment and signal levels for reliable BMS communication without requiring custom wiring or third-party adaptors. Technical Specs Specification Detail Brand Victron Energy Part Number ASS030720150 Cable Type VE.Can to CAN-Bus BMS — Type B Cable Length 5 metres Compatible Batteries (Type B) LG Chem, AXIstorage, BMZ, Pylontech Compatible Batteries (Type A) BYD (separate cable) Victron Interface VE.Can / GX Device Connector Type Not specified — confirm with Victron Operating Temperature Not specified — confirm with Victron Weight Not specified — confirm with Victron Warranty Not specified — confirm with Victron Compatible With / Goes Well With Compatible third-party batteries (Type B): LG Chem RESU series Pylontech US series and compatible models AXIstorage battery systems BMZ battery systems Compatible Victron host systems: Victron Energy Cerbo GX Victron Energy CCGX (Color Control GX) Victron Energy Venus GX Other Victron GX devices with VE.Can port Pairs well with: Victron GX devices (Cerbo GX, CCGX) for CAN-bus battery integration Victron SmartSolar MPPT charge controllers Victron MultiPlus and Quattro inverter/chargers Victron SmartShunt for supplementary battery monitoring Frequently Asked Questions How do I know if I need a Type A or Type B cable? Type B (this cable) is compatible with LG Chem, AXIstorage, BMZ, and Pylontech batteries. Type A is required for BYD batteries. If your battery brand is not on either list, consult the Victron VE.Can BMS cable manual for current compatibility information before purchasing. Is a 5m cable the right length for my installation? The 5m cable suits installations where the battery and GX device are not in close proximity — for example, a battery bank in a separate compartment from the GX control hub. A 1.8m version is available if a shorter run is sufficient. Measure your installation before ordering to avoid an unnecessarily long or short cable run. What does this cable actually enable in a Victron system? This cable enables the Victron GX device to receive BMS data from the connected third-party battery — including state of charge, cell-level information, temperature, and charge/discharge current limits. The GX device uses this data to coordinate the behaviour of connected Victron chargers, solar controllers, and inverter/chargers to protect the battery and optimise charging. Does this cable work with all Pylontech or LG Chem models? Compatibility is confirmed at the brand level for Pylontech, LG Chem, AXIstorage, and BMZ. Specific model and firmware compatibility within each brand should be verified against the current Victron VE.Can BMS cable compatibility documentation before purchase — Victron updates this list as new battery models are tested and supported. Can I use this cable without a Victron GX device? The VE.Can to CAN-Bus BMS cable is designed for use with Victron GX devices that have a VE.Can port. It is not a standalone solution — a compatible Victron GX device is required as the host system for the CAN-bus BMS communication to function. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy MEGA-Fuse 300a/80v (Package of 5 pcs) For specialty 48-volt applications, we have a limited range of these Mega fuses that fit in the Lynx Distributor system.  Victron Energy CIP138300020 Features: 300 Amp fuse Rated for 80 Volts DC Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Frankies BrandBeast's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron ASS030572050 RS485 to USB Interface 5m Data Communication Cable A 5 metre RS485 to USB interface cable for connecting compatible Victron Energy products with an RS485 port to a computer or monitoring device via USB. Product Overview The Victron ASS030572050 is a 5 metre RS485 to USB data communication interface cable designed for use with Victron Energy products featuring an RS485 connection. It enables direct communication between compatible Victron devices and a computer or USB host, supporting configuration, monitoring, and data access via the appropriate Victron software. Also available in a 1.8 metre length for shorter installation runs. Victron Energy is widely recognised for technical innovation, reliability, and build quality across their range of professional independent power products, including sinewave inverters, inverter/chargers, battery chargers, DC-DC converters, transfer switches, battery monitors, and more. Features & Benefits The 5 metre cable length provides flexibility for installations where the Victron device is mounted away from a nearby computer or monitoring point, reducing the need for additional extension solutions. The RS485 to USB interface handles the signal conversion between the device's RS485 communication port and a standard USB connection, allowing straightforward integration with a PC or laptop running compatible Victron software. Technical Specs Specification Detail SKU ASS030572050 Type RS485 to USB Interface Cable Cable Length 5 metres Connection RS485 to USB Compatible With Victron products with an RS485 connection Also Available 1.8m (ASS030572018) Compatible With Victron Energy products equipped with an RS485 communication port. Please check your product's manual or contact us to confirm RS485 interface compatibility before purchase. Frequently Asked Questions What Victron products is this cable compatible with? The ASS030572050 is compatible with Victron Energy products that feature an RS485 communication port. This includes select models across Victron's inverter, charger, and battery monitor ranges. Check your product's manual or contact us to confirm your specific device has an RS485 connection before purchasing. Is this cable available in a shorter length? Yes. The RS485 to USB interface is also available in a 1.8 metre length for installations where the Victron device and computer are in close proximity. What is RS485 communication used for in Victron products? RS485 is a serial communication standard that allows Victron devices to transmit data to a connected computer or monitoring system. Using this cable with the appropriate Victron software enables configuration, real-time monitoring, and data logging of the connected device. Does this cable require any drivers or software to use? Driver and software requirements will depend on the operating system and the specific Victron product being connected. Please refer to your Victron device's manual or the Victron Energy website for software and driver information applicable to your setup. Can this cable be used to connect multiple Victron devices simultaneously? RS485 supports multi-device communication on a single bus in some configurations, but this depends on the specific Victron products and setup involved. Please refer to Victron's technical documentation or contact us for guidance on multi-device RS485 configurations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy 0.3m Direct Cable: The Direct Cable from Victron Energy Have Been Designed to Be a True Worldwide Product VE.Direct cables, use to connect BMV-70x and low power MPPTs to the Color Control GX. Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy 3m RJ45 UTP Cable: The UTP Cable from Victron Energy Have Been Designed to Be a True Worldwide Product Network cables for VE.Can, VE.Bus, VE.Net and VE9bitRS485. Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy GX Touch 50 Adapter For CCGX Cut-Out: This Adapter Is Designed to Easily Replace the CCGX Display with the Newer GX Touch 50This adapter is designed to easily replace the CCGX display with the newer GX Touch 50. Contents of the packaging are the metal bracket, the plastic bezel, and four mounting screws.There are two methods of mounting:"Install including screen" the most secure mounting of the GX Touch display"Install excluding screen GX Touch display" is easier to remove, and the adapter can be mounted before completing the wiring*Please note that GX Touch 50 is to be purchased separately. Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less