Rockford Fosgate P300-8P Punch 8" 300 Watt Powered Vented Enclosure When space is the deciding factor but bass cannot be left behind, the P300-8P packs a high-output 8" woofer and 300-watt Class D amplifier into a slim vented enclosure suited for trucks and small car applications alike. Product Overview The P300-8P is Rockford Fosgate's compact all-in-one powered subwoofer enclosure, designed for installations where a 10" or 12" powered enclosure will not fit but genuine low-end performance is still required. The slim vented MDF enclosure houses an 8" proprietary woofer impedance-optimised for the integrated 300-watt Class D amplifier in a closed-loop design, ensuring the driver and amplifier work together as a matched system from the factory. The vented slot-port enclosure extends low-frequency output down to 30 Hz, delivering powerful bass reproduction from a compact footprint. An onboard variable Low-Pass crossover (50-200 Hz), Bass EQ with 0 to +12 dB of boost, and a 0-180 degree phase switch are accessible on the amplifier plate, while the included Punch Level Control remote handles bass adjustment from the driver's seat. An intelligent auto turn-on/off circuit with three selectable modes (Remote Trigger, DC Offset Sense, and Audio Sense) eliminates the need for a dedicated remote turn-on wire in OEM installations. Separate RCA and high-level speaker inputs make it compatible with both aftermarket and factory head units. Quick-release input connectors allow the enclosure to be removed when space is needed. The heat-activated vinyl finish resists marks and scuffs in daily use. CEA-2006 (amplifier) and CEA-2031 (woofer) compliant, Klippel verified, with a 1-year warranty. Features & Benefits 300-Watt Class D Amplifier with Closed-Loop Design: The integrated amplifier is an impedance-matched, closed-loop Class D design tuned specifically for the P300-8P's proprietary 8" woofer, ensuring maximum efficiency and precise driver control at all output levels within the compact enclosure footprint. High-Efficiency, Low Current Amplifier Design: The Class D amplifier topology keeps current consumption low relative to output, making the P300-8P compatible with stock electrical systems in trucks and small vehicles where alternator capacity has not been upgraded. Vented Enclosure for Extended Low-Frequency Output: The slot-port vented enclosure extends bass reproduction down to 30 Hz, providing powerful low-frequency output from an 8" driver in a slim footprint, suited to both truck under-seat and small car boot installations. Slim Design for Truck and Small Car Applications: The compact enclosure dimensions make the P300-8P well suited to tight installation locations, including truck under-seat positions and the limited boot spaces of sub-compact and small hatchback vehicles. Klippel Verified Woofer: The 8" proprietary woofer has been verified through the Klippel certification programme, which measures and corrects non-linear distortion parameters to deliver the best possible transient accuracy and low-frequency output from a compact, impedance-matched driver. Intelligent Auto Turn-On/Off: Three selectable turn-on modes (Remote Trigger, DC Offset Sense, and Audio Sense) allow the P300-8P to power on automatically in any installation scenario, including factory head units without a dedicated remote output. Variable Low-Pass Crossover: Continuously variable from 50 to 200 Hz at 12 dB/octave Butterworth, the onboard crossover integrates cleanly with full-range speakers across virtually any crossover point set by the main system amplifier or head unit. Onboard Bass EQ: 0 to +12 dB of onboard bass boost corrects for acoustic deficiencies in the vehicle interior and adds presence to the low-frequency output without an external equaliser. Phase Switch: A 0 to 180 degree phase control allows the subwoofer to be time-aligned with the main speakers acoustically, compensating for physical placement differences for a coherent, integrated bass response. Included Punch Level Control Remote: The Punch Level Control is included in the box, allowing bass output to be adjusted from the driver's seat in real time without accessing the amplifier plate directly. Quick-Release Input Connections: Input connections use quick-disconnect fittings, allowing the enclosure to be removed from the vehicle quickly when cargo or passenger space is needed, without tools or cable work. High and Low-Level Inputs: Separate RCA (low-level, 150mV-6V) and speaker-level (high-level, 300mV-12V) inputs via a single RCA pair summed L/R support both aftermarket and OEM head unit installations from the same unit. Thermal and Over/Under Voltage Protection: Onboard protection monitors both operating temperature and supply voltage, shutting the amplifier down safely before damage occurs under fault conditions. Precision MDF Enclosure with Vinyl Finish: Constructed from 5/8" Medium Density Fiberboard for optimal acoustic properties, covered with a heat-activated vinyl finish that resists marks and scuffs in daily use. CEA-2006 and CEA-2031 Compliant: Amplifier power ratings conform to CEA-2006 industry standards at 14.4V with 1% or less THD. Woofer power handling conforms to CEA-2031, confirming both ratings are real, tested figures. Technical Specs Specification Detail SKU P300-8P Series Punch Woofer Size 8" Woofer Quantity 1 Woofer Series Proprietary Power Handling 300W RMS Integrated Amplifier 300W RMS Amplifier Class Class D Enclosure Type Vented Enclosure Material 5/8" MDF Enclosure Finish Heat-Activated Vinyl Frequency Response 30 Hz - 200 Hz Low-Pass Crossover Variable 50-200 Hz @ 12 dB/octave Butterworth Bass EQ 0 to +12 dB Phase Control 0 to 180 degrees Input Switch High-Level (Speaker) / Low-Level (RCA) Signal Input 1 x RCA Pair (L/R Summed) Input Sensitivity (Low-Level) 150 mV - 6V Input Sensitivity (High-Level) 300 mV - 12V Input Impedance 20k Ohms Auto Turn-On Selector Remote Trigger / DC Offset Sense / Audio Sense Remote Control Punch Level Control (included) Visual Indicators POWER / PROTECT LED Heatsink Type Extruded Aluminium Cooling Convection Power Wire Gauge 8 AWG (B+/GND), 18 AWG (Remote) Power Input Connector Quick Disconnect Fuses 20A total (2 x 10A ATO) Compliance CEA-2006 (amplifier), CEA-2031 (woofer), Klippel Verified Dimensions (H x W x D) 11.4" x 17.6" x 5.6" (289 mm x 448 mm x 141 mm) Shipping Weight 19 lbs (8.6 kg) Warranty 1 Year Goes Well With The P300-8P is a standalone bass solution requiring no separate subwoofer amplifier or enclosure. For factory head unit installations, the high-level speaker inputs and Audio Sense auto turn-on allow direct connection without additional interface hardware. For aftermarket head unit installations, the RCA input connects directly from the head unit's subwoofer pre-out. To complement the P300-8P with front and rear speaker amplification, the PBR400X4D or R2-200X2 pair naturally via a standard RCA pre-out from the head unit. For installations in trucks where a larger driver is preferred and space allows, the P300-10T or P300-12T are direct step-up options in the same powered truck enclosure range. An 8-gauge power and ground cable run to the battery is required, along with the 2 x 10A ATO fuses included in the box. Frequently Asked Questions How does the P300-8P differ from the P300-10T and P300-12T? All three are 300-watt powered enclosures sharing the same amplifier specification, feature set, and installation approach. The P300-8P uses an 8" vented enclosure with a frequency response from 30 Hz and the smallest physical footprint, making it the right choice for the tightest installation spaces in small cars and trucks. The P300-10T and P300-12T use sealed enclosures with 10" and 12" drivers respectively, each in progressively larger wedge-profile enclosures suited to larger truck under-seat locations where more space is available. Why does the P300-8P use a vented enclosure while the P300-10T and P300-12T are sealed? The vented design allows the 8" driver to produce extended low-frequency output down to 30 Hz, matching the low-end reach of the larger sealed 10" and 12" enclosures despite the smaller driver size. The port tuning compensates for the reduced cone area of the 8" woofer, delivering strong bass output from a notably more compact enclosure footprint. Can the P300-8P be connected directly to a factory head unit? Yes. The high-level speaker inputs accept signal from the factory head unit's speaker outputs directly, and the Audio Sense or DC Offset Sense auto turn-on modes allow the enclosure to power on without a dedicated remote turn-on wire. This makes the P300-8P a straightforward plug-in bass upgrade for OEM systems without requiring head unit replacement. What are the three auto turn-on modes, and which should I use? Remote Trigger mode powers the amplifier on when a 12V signal is received at the remote input terminal, requiring a remote turn-on wire from the head unit. DC Offset Sense mode detects a DC voltage change on the high-level speaker input to trigger turn-on, suitable for OEM systems where the speaker output changes state when the head unit powers on. Audio Sense mode detects an incoming audio signal and triggers turn-on automatically, making it the most universal option for both OEM and aftermarket installations without a dedicated remote output. What is Klippel Verification, and why does it matter for a compact powered enclosure? Klippel is an independent speaker measurement and certification programme that identifies and corrects non-linear distortion parameters in speaker drivers, including suspension non-linearities and motor force variation across the cone's travel range. In a compact powered enclosure where the driver and amplifier are a matched system and the 8" cone is working hard to deliver 30 Hz output, Klippel verification confirms that the woofer's performance envelope has been accurately measured and optimised to deliver clean, low-distortion bass at the rated 300 watts across its full operating range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Surface Mounting SpacerThis 43mm (1.7 in.) mounting spacer allows for tidy installation of your Fusion Panel-Stereo directly onto any flat surface with no mounting cut-out required. Refer to the Panel-Stereo installation instructions for mounting.Compatible with: PS-A302B Panel-Stereo. Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Male to Male Antenna Thread Adaptor 3/8" to 5/16" for 27 MHz CB Antenna Installations Product Overview The GME AD201 is a male to male antenna thread adaptor that converts between a 3/8" thread and a 5/16" thread, specifically for 27 MHz CB antenna installations. Both ends of the adaptor have external (male) threads a 3/8" male on one end and a 5/16" male on the other allowing connection between components where thread sizes need to be bridged. The 3/8" thread was widely used in older 27 MHz CB antenna bases, certain marine antenna mounts, and some aftermarket bull bar and gutter mount hardware. The 5/16" TPI thread is the Australian standard for CB and UHF CB antenna whips. The AD201 allows a 5/16" male-thread antenna whip to be used in a 3/8" female-thread mount, or bridges other 3/8"/5/16" mismatch scenarios in 27 MHz CB installations. Features & Benefits Male to male configuration — both ends have external threads; bridges female-to-female thread mismatch scenarios in 27 MHz CB antenna installations 3/8" to 5/16" thread conversion — allows connection between components using these two different antenna thread standards 27 MHz CB specific — designed for 27 MHz CB antenna installations where 3/8" and 5/16" thread hardware needs to be combined Genuine GME accessory — manufacturer-supplied adaptor for correct fitment Technical Specs Specification Detail Brand GME Part number AD201 Product type Male to male antenna thread adaptor Thread — end 1 Male 3/8" Thread — end 2 Male 5/16" Application 27 MHz CB antenna installations Material Not specified — confirm with GME Weight Not specified Compatible With / Goes Well With 27 MHz CB antenna installations with mismatched 3/8" and 5/16" thread components GME 27 MHz CB antennas using 5/16" TPI thread base 3/8" female-thread antenna mounts used in older 27 MHz CB systems and certain marine hardware Weight Not specified Frequently Asked Questions What does a male to male adaptor do in an antenna installation? A standard antenna installation connects a male-thread antenna whip into a female-thread base. A male to male adaptor is used when two female-thread components need to be joined — for example, connecting a 3/8" female-thread mount to a 5/16" female-thread extension or coupler. It effectively extends the male thread in two directions, bridging two female sockets of different thread sizes. What is the 3/8" thread standard and where is it commonly used? The 3/8" antenna thread (sometimes listed as 3/8"-24 UNF) is common on older 27 MHz CB antenna bases and mounts, certain marine antenna hardware, and some American-standard antenna equipment. It is a larger diameter thread than the 5/16" TPI standard used on most Australian UHF CB and CB antenna whips. Is the AD201 compatible with 477 MHz UHF CB antennas? The AD201 is specified for 27 MHz CB antenna installations. Whether it is suitable for 477 MHz UHF CB antennas depends on the specific antenna whip and mount thread specifications — confirm with GME if you intend to use it with a UHF CB system. How does the AD201 differ from the AD006? The AD006 is a male 5/16" to female M6 adaptor for SCANIA and IVECO heavy vehicle antenna mounts. The AD201 is a male to male 3/8" to 5/16" adaptor for 27 MHz CB installations. They serve different thread conversion needs for different applications and are not interchangeable. Is this sold as a single piece? One adaptor is included per purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hands-Free Safety On The Road! MagicMount™ is the multi-award-winning magnetic mounting system for conveniently mounting smartphones and more. Just hover your device near the magnetic (after you place the MagicPlate) surface and it instantly locks securely in place. This cell phone car mount system is sleek and versatile. The cradle-free design uses high-powered magnets to secure your device where you use them most. Place your device at any angle for convenient viewing. On the road, at the office, at home, everywhere. Security Secure the MagicMount™ with the automotive-grade 3M¬Æ adhesive  MagicPlate™ Install the MagicPlate™ behind your case or battery cover, directly to your rugged case or directly to your device. *A larger and smaller MagicPlate™ is included. MAGICPLATE Placement Options MAGICPLATE, non-magnetic, adhesive-backed, metal plates, are an integral component of the MagicMount Magnetic Mount System for mobile devices. Just apply the MagicPlate as shown to the right and you are ready to use any one of the many MagicMount products available in this growing family of magnetic mounts. MagicPlates come in a variety of sizes and shapes depending upon which MagicMount you buy and replacement kits are also available. There are several ways to utilize/apply the MagicPlate with your mobile device.Scosche MagicMount MagicPlate placement options. Directly to the back of the case Directly to the mobile device Between the device and case (should you be using one) – either with or with out using the adhesive Wireless Charging Devices It is important to mount the MagicPlate in the proper location on these devices to avoid interfering with wireless charging functionality. We have created a MagicPlate Template Guide to assist wireless phone users who plan to use their device with our MagicMount Charge products or other Scosche wireless chargers.  Protect your device when directly applying MagicPlate to your device MagicMounts come with a protective plastic film ‚Äãsticker ‚Äãin the box. This film should ALWAYS be used when you are applying the MagicPlate directly to your mobile device using the adhesive‚Äã based MagicPlate‚Äã. ‚ÄãDoing this will aid in the ease of removal of the MagicPlate should you wish to do that in the future. We have created a short video to show you how to properly apply the plastic film followed by the MagicPlate.  Why Use MagicMount™ Powerful Magnets Powerful rare-earth magnets hold your device securely in place even on the bumpiest roads.  Works with Any Device MagicMount is a versatile magnetic holder for cellphones, smartphones, tablets, GPS units, and more.  Safe For Smartphones & Tablets The high powered neodymium magnets are 100% safe and will not damage your device. Strong Bond, No Residue MagicMounts use automotive grade 3M¬Æ adhesive so they will always hold strong but can also be easily removed if the time comes.  Better Design The sleek cradle-free design works perfectly with larger devices and allows you to position your screen for optimal viewing. Works at Any Angle Allows for countless viewing angles and full access to control and ports. Legendary Products & Support From Authorized Dealers When you choose Scosche, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Scosche dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Scosche's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Scosche dealer today!

Read more less

Rockford Fosgate R2S-1X10 Prime R2S 10" Shallow Loaded Enclosure Compact Fit, Real Bass Product Overview The Rockford Fosgate R2S-1X10 is a single 10" shallow loaded enclosure housing a Prime R2S shallow subwoofer (R2SD4-10), rated at 200 Watts RMS and 400 Watts peak, internally pre-wired to a 2-ohm load. The more compact sibling of the R2S-1X12, it delivers genuine Prime series bass performance from a slim-line wedge profile just 8.25 cm deep at the top and 13.34 cm at the base in a narrower 48.26 cm wide footprint suited to tighter behind-seat and under-seat spaces in Australian utes, single-cab trucks, and compact vehicles. Like the R2S-1X12, the R2S-1X10 is purpose-built for installations where depth and width are the critical constraints and budget is a consideration. The R2SD4-10 shallow driver is engineered specifically for reduced mounting depth, and the wedge enclosure geometry is optimised for single-cab truck and limited seat-travel installations. CEA-2031 compliant and constructed from 5/8" MDF with high-density carpet and 12 AWG quick-release compression terminals, the R2S-1X10 is a ready-to-install solution that requires only a power feed, ground, and audio signal to get running. Key Specifications Subwoofer: Single 10" Rockford Fosgate Prime R2S shallow (R2SD4-10) Power handling: 200W RMS / 400W peak Pre-wired impedance: 2 ohm (internally wired) Enclosure type: Shallow sealed wedge Construction: 5/8" MDF Finish: High-density carpet Input terminals: Up to 12 AWG quick-release compression Dimensions (H x W x D bottom x D top): 34.29 x 48.26 x 13.34 x 8.25 cm (wedge) Shipping weight: 9.02 kg CEA-2031 compliant Features & Benefits Ultra-slim wedge profile 8.25 cm at top, 13.34 cm at base: Engineered for the most space-restricted behind-seat and under-seat installations in Australian single-cab trucks, utes, and compact vehicles. The tapered wedge profile fits neatly behind seats with limited travel clearance where flat-bottomed or deeper enclosures will not. Narrower than the R2S-1X12: At 48.26 cm wide versus 69.53 cm for the R2S-1X12, the R2S-1X10 fits in installations where the 12" enclosure width is too great the same shallow wedge depth profile in a significantly more compact width for tighter spaces. Prime R2S shallow 10" driver (R2SD4-10): Specifically engineered for shallow mounting depth, not a standard driver forced into an undersized box. Delivers accurate, controlled bass output within the sealed shallow enclosure alignment it is designed for. 200W RMS / 400W peak power handling: Accessible power requirements suited to entry-level and mid-range mono amplifiers. Pre-wired to 2 ohms confirm your amplifier's 2-ohm power rating before purchase. Pre-wired to 2 ohms: Factory internal wiring presents a 2-ohm load to the amplifier. No internal wiring configuration required connect your amplifier to the 12 AWG compression terminals and go. Optimised wedge design for single-cab trucks and limited seat travel: The wedge geometry is specifically optimised for single-cab and restricted seat-travel installations, maximising internal enclosure volume within the minimum available depth a practical solution for Australian working utes and single-cab trucks. Lightest enclosure in the Rockford Fosgate shallow loaded range: At just 9.02 kg, the R2S-1X10 is the most manageable shallow loaded enclosure in this catalogue. Easy for a single person to handle, position, and install a practical advantage for DIY installs in tight spaces. CEA-2031 compliant: Power handling figures comply with the CEA-2031 standard for loaded subwoofer enclosures, providing a verified and comparable specification. 5/8" MDF construction: Rigid enclosure walls minimise panel flex and resonance at sustained 200W RMS input levels, ensuring consistent bass reproduction in the shallow sealed alignment. High-density carpet finish: Durable, professional appearance suited to daily under-seat and behind-seat use in Australian utes and trucks. 12 AWG quick-release compression terminals: Tool-free wiring connection and disconnection for clean installation and easy removal practical for ute and single-cab installs where the enclosure is occasionally removed. Prime series value positioning: Delivers Rockford Fosgate engineering and factory tuning at the accessible Prime series price point a genuine step up from generic shallow enclosures without the cost of the Punch P3S shallow range. Technical Specs Specification Detail SKU R2S-1X10 Brand Rockford Fosgate Subwoofer Driver 10" Rockford Fosgate Prime R2S shallow (R2SD4-10) Woofer Quantity 1 Power Handling 200W RMS / 400W peak Pre-Wired Impedance 2 ohm (internally wired) Enclosure Type Shallow sealed wedge Construction Material 5/8" MDF Finish High-density carpet Input Terminals Up to 12 AWG quick-release compression CEA-2031 Compliant Yes Dimensions (H x W x D bottom x D top) 34.29 x 48.26 x 13.34 x 8.25 cm (wedge) Shipping Weight 9.02 kg Warranty Confirm with supplier Compatible With Mono amplifiers stable at 2 ohms, rated at or near 200W RMS at 2 ohms Rockford Fosgate Prime and Punch series mono amplifiers Single-cab trucks and utes with behind-seat or under-seat depth and width restrictions Compact vehicles where the R2S-1X12 width (69.53 cm) is too large for the available space Vehicles requiring the most compact shallow loaded enclosure option in the Prime range Rockford Fosgate wiring kits for 2-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the R2S-1X10 require? The R2S-1X10 is pre-wired to 2 ohms and handles 200W RMS. A mono amplifier stable at 2 ohms and rated at or near 200W RMS at 2 ohms is recommended such as a compatible Rockford Fosgate Prime or Punch mono amplifier. Confirm your amplifier's 2-ohm rating before purchase. What is the difference between the R2S-1X10 and R2S-1X12? Both share the same shallow wedge depth profile (13.34 cm base, 8.25–8.26 cm top) and 2-ohm pre-wiring. The R2S-1X10 uses a 10" R2S driver rated at 200W RMS in a narrower 48.26 cm wide enclosure weighing 9.02 kg. The R2S-1X12 uses a 12" R2S driver rated at 250W RMS in a wider 69.53 cm enclosure weighing 11.15 kg. Choose the R2S-1X10 when width or weight is the tighter constraint. How shallow is the R2S-1X10 enclosure? The R2S-1X10 wedge profile is 13.34 cm deep at the base and 8.25 cm deep at the top, with an overall height of 34.29 cm and width of 48.26 cm. It is specifically optimised for single-cab trucks and utes where seat travel limits available mounting depth. How does the R2S-1X10 compare to the Punch P3S-1X10? Both are shallow sealed wedge enclosures for ute and truck installs. The P3S-1X10 uses a higher-pedigree Punch P3S shallow driver with 300W RMS power handling and 10 AWG terminals. The R2S-1X10 uses a Prime R2S shallow driver with 200W RMS and 12 AWG terminals making it the more budget-accessible shallow loaded 10" enclosure in the Rockford Fosgate range. Is the R2S-1X10 suitable for a DIY installation? Yes. At 9.02 kg with 12 AWG quick-release compression terminals, the R2S-1X10 is easy for a single person to handle and install. Connect power, ground, signal, and speaker wiring to a compatible 2-ohm mono amplifier and the system is ready to use without specialist tools or professional installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Small chassis. Full range. Punch power for sub or centre channel builds. Product Overview The Rockford Fosgate P300X1 is a 300W mono amplifier from the Punch series, built around a compact chassis capable of fitting where conventional amplifiers cannot. Unlike dedicated subwoofer-only mono amplifiers, the P300X1 features a full-range frequency response making it equally suited to powering a dedicated subwoofer system or a single centre channel speaker. Whether you're running one driver or multiple speakers off a single channel, the 2-ohm capable design delivers 300W of Punch-series output with headroom to spare. The P300X1 is a feature-rich unit for its class. The built-in C.L.E.A.N. setup system simplifies gain calibration, reducing the risk of clipping and distortion from a poorly set amplifier. High-level inputs with an Auto Turn-On circuit allow direct integration with factory head units without requiring a dedicated remote turn-on wire. RCA pass-through outputs enable daisy-chaining to additional amplifiers, and the stealth top-mounted control panel keeps all adjustments accessible without removing the amplifier from its install location. An optional PLC2 remote Punch Level Control (sold separately) connects to add driver-accessible output adjustment and an input clip indicator for real-time gain monitoring. Key Specifications Channels: 1 (mono) Output power: 300W @ 2 ohms (power at other impedances — not specified) Frequency response: Full-range (exact Hz range — not specified) Circuit topology: Not specified Crossover: 12dB/octave Butterworth (frequency range — not specified) Punch EQ: +18dB boost @ 45Hz (see Red-flags) Signal input: High level with Auto Turn-On Signal output: RCA pass-through Remote control: Optional PLC2 (not included — sold separately) Clip indicator: Yes (active when PLC2 is connected) Control panel: Top-mounted (stealth) Setup system: C.L.E.A.N. Input sensitivity: Not specified Nominal impedance load: Not specified CEA compliance: Not specified in provided data Power wire gauge: Not specified Speaker wire gauge: Not specified Operating voltage: Not specified Recommended fuse: Not specified Dimensions: Not specified Features & Benefits Full-Range Frequency Response — Sub or Centre Channel — Most compact mono amplifiers are subwoofer-only units with a fixed low-pass filter. The P300X1's full-range response opens up a second use case: powering a dedicated centre channel speaker in a vehicle with a more complex audio setup. One amplifier, two legitimate applications. C.L.E.A.N. Setup System — Rockford Fosgate's C.L.E.A.N. (Clean Level Efficient Amplifier Noise) setup process uses an on-board indicator to guide accurate gain calibration between the head unit and amplifier. Setting gain by ear or by eye is a common cause of distortion and clipping — C.L.E.A.N. removes the guesswork, protecting your speakers and ensuring the amplifier performs to its rated output without distortion. High-Level Input with Auto Turn-On — The P300X1 accepts high-level speaker wire inputs from factory or OEM head units and powers on automatically when it detects signal — no remote turn-on wire required. This significantly simplifies integration with factory audio systems, particularly in vehicles where accessing the head unit remote output is difficult or impractical. On-Board Punch EQ (+18dB @ 45Hz) — A bass boost centred at 45Hz is available directly from the amplifier, allowing low-end tuning without an external equaliser. The +18dB figure is sourced from the supplier features list — refer to Red-flags below for an important note on this specification. Optional PLC2 Remote Level Control with Clip Indicator — The P300X1 is wired ready for the optional Rockford Fosgate PLC2 remote level control (sold separately). When connected, the PLC2 adds driver-accessible output adjustment and activates an input clip indicator — a LED that warns when the incoming signal is clipping before it reaches the amplifier. This combination helps protect speakers and ensures clean output at all listening levels. RCA Pass-Through Outputs — Signal can be chained to a second amplifier via the RCA pass-through outputs, enabling clean multi-amp builds without splitters or Y-adaptors. Useful in systems running the P300X1 on a centre channel or sub with a separate amplifier on front and rear speakers. Stealth Top-Mounted Control Panel — All controls — gain, crossover, EQ — are located on the top surface of the amplifier rather than on the endplate. This allows access to adjustments after installation in boot floors, under-seat locations, or tight enclosures without the need to remove or reposition the unit. Compact Chassis — The P300X1 is specifically designed to fit installation locations where a conventional amplifier will not physically fit. Exact dimensions are not specified in supplier-provided data — confirm with Rockford Fosgate before planning a space-critical install. Muted Turn-On + Full Protection Circuit — Muted turn-on prevents startup thumps that can stress tweeters and subwoofer cones. Over-current and short-circuit protection safeguard the amplifier and connected drivers during fault conditions. Technical Specs Specification Detail Channels 1 (mono) Output power 300W @ 2Ω Power by impedance Not specified Frequency response Full-range (Hz range not specified) Circuit topology Not specified Crossover type 12dB/octave Butterworth Crossover frequency range Not specified Punch EQ +18dB @ 45Hz (unverified — see Red-flags) Signal input High level (auto turn-on) Signal output RCA pass-through Setup system C.L.E.A.N. Remote control Optional PLC2 (sold separately) Clip indicator Yes (when PLC2 connected) Control panel Top-mounted (stealth) Turn-on method Auto (from high-level input signal) Muted turn-on Yes Protection Over-current / Short circuit Input sensitivity Not specified CEA compliance Not specified Power wire gauge Not specified Speaker wire gauge Not specified Operating voltage Not specified Recommended fuse Not specified Dimensions Not specified Weight 4.3 kg Compatible With / Goes Well With The P300X1 is confirmed for the following applications based on manufacturer-provided information: Dedicated subwoofer systems (single driver or multiple speakers on one channel) Dedicated centre channel speaker amplification (full-range frequency response confirmed) 2-ohm subwoofer or speaker loads (300W RMS — power at other impedances not confirmed) Factory head units without RCA outputs (via high-level Auto Turn-On input) Goes well with: Rockford Fosgate Punch series subwoofers or centre channel drivers rated to 300W Rockford Fosgate PLC2 Remote Punch Level Control (optional — sold separately) Factory head units or OEM audio systems (via high-level auto turn-on) Aftermarket head units with RCA preamp outputs Frequently Asked Questions Can the P300X1 power a centre channel speaker as well as a subwoofer? Yes. Unlike most compact mono amplifiers, the P300X1 features a full-range frequency response — making it suitable for a dedicated centre channel speaker or a subwoofer system. The exact frequency range is not confirmed in the provided data; verify with Rockford Fosgate for your specific application. What is the C.L.E.A.N. setup system? C.L.E.A.N. is Rockford Fosgate's on-board gain calibration system. It uses an indicator to guide correct gain matching between the head unit and amplifier, preventing clipping and distortion that commonly results from gain set too high — protecting speakers and maximising clean output. Is the Punch Level Control included with the P300X1? No. The PLC2 remote Punch Level Control is an optional accessory and is sold separately. The P300X1 is wired and ready to accept the PLC2, and when connected it adds driver-accessible level control and an active input clip indicator. Does the Auto Turn-On circuit require a remote wire from the head unit? No. The high-level Auto Turn-On circuit powers the amplifier when it detects signal at the speaker-level inputs — no dedicated remote turn-on wire is needed. This simplifies installation with factory head units where accessing the remote output is difficult. Can I chain another amplifier off the P300X1? Yes. RCA pass-through outputs allow signal to be routed to a second amplifier cleanly, without splitters or Y-adaptors. This is useful in systems running the P300X1 alongside a separate full-range or multichannel amplifier. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Containing Everything You Need For A Perfect Upgrade in One Box! Double DIN Install Kit - BlackComplete a full aftermarket double din head unit installation in your Holden Trailblazer LT (2017 on) and Colorado LT (2017 on) with MyLink 7" OEM System from start to finish with this Aerpro vehicle-specific head unit installation kit, containing everything you need for a perfect upgrade in one box. This kit includes a facia kit, plastic brackets, an infodapter interface, a chime speaker, an antenna adapter, and a universal patch lead. To make the installation process even easier, simply add Aerpro APP8 or APP9 aftermarket head unit harness adapters which will connect from the aftermarket head unit directly to the steering wheel control interface harness supplied in this kit. Important Information: Suitable for OEM Mylink 7" Systems. The aftermarket head unit requires a rear camera input. To retain a factory-fitted camera, an additional vehicle-specific camera retention harness is also required (If available, sold separately). Please be aware when installing a High Definition Camera, the camera resolution will be reduced using this product. Please Note: Specific head unit harnesses and accessories are sold separately. Aerpro FP8299K Features: Kit includes all the parts required to complete an installation of an aftermarket head unit conveniently in one box Suitable for double din aftermarket head unit installation High-quality black finish on the facia kit to suit the style of the dashboard in the vehicle Retains steering wheel control functionality including phone button The infodapter allows vehicle information and vehicle settings to be displayed on any aftermarket AV head unit including climate control & optical parking sensor visualisation CAN-BUS integration compatible, no additional modules required for CAN-BUS vehicles Provides output feeds for the parking brake, speed pulse, and reverse gear To retain a factory-fitted camera, an additional vehicle-specific camera retention harness is required (sold separately) To simplify installation, this kit is compatible with Aerpro APP8 and APP9 aftermarket head unit harness adapters Aerpro FP8299K Specifications: Application: Double DIN Colour: Black Internal Dimensions: 180mm (W) x 104mm (H) External Dimensions: 380mm (W) x 265mm (H) Vehicle Compatibility: Holden Colorado (2017 - 2020) Holden Trailblazer (2017 - ON) Inclusions: Facia Kit Plastic Brackets Infodapter Interface Chime Speaker Universal Patch Lead Antenna Adapter Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Containing Everything You Need For A Perfect Upgrade in One Box! Double DIN Install Kit - Matte & Gloss BlackComplete a full aftermarket double din headunit installation in your Volkswagen Amarok (2011-2016), Caddy (2005-2015), EOS (2007-2014), Golf MK5 (2004-2009), Golf MK6 (2009-2013), Jetta (2006-2015), Passat (2006-2015), Passat Wagon (2006-2012), Polo (2006-2014), Tiguan (2008-2014), Transporter T5 (2010-2015) and Scirocco (2009-2014) from start to finish with this Aerpro vehicle specific headunit installation kit, containing everything you need for a perfect upgrade in one box.This kit includes a facia kit, plastic brackets, steering wheel control interface, antenna adapter, amplifier adapter harness, and universal patch lead. To make the installation process even easier, simply add Aerpro APP8 or APP9 aftermarket headunit harness adapters which will connect from the aftermarket headunit directly to the steering wheel control interface harness supplied in this kit. Please Note: Some amplified models require amplifier trigger wire to be manually connected. Features: Kit includes all the parts required to complete an installation of an aftermarket headunit conveniently in one box. Suitable for double din aftermarket headunit installation. High-quality matte and gloss black finish on the facia kit to suit the style of the dashboard in the vehicle. Retains steering wheel control functionality including phone button. CAN-BUS integration is compatible, no additional modules are required for CAN-BUS vehicles. Suitable for OEM factory amplified and non-amplified vehicles. Provides output feeds for the parking brake, speed pulse, and reverse gear. To simplify installation, this kit is compatible with Aerpro APP8 and APP9 aftermarket headunit harness adapters. Specifications: Application: Double DIN Colour: Matte & Gloss Black Internal Dimensions: 173mm (W) x 99mm (H) External Dimensions: 218mm (W) Top / 211mm (W) Base x 286mm (H) Weight: 0.72kg Inclusions: Facia Kit Plastic Brackets Steering Wheel Control Interface Universal Patch Lead Amplifier Retention Harness Antenna Adapter Vehicle Compatibility: Volkswagen Amarok (2011 - 2016) Volkswagen Caddy (2005 - 2015) Volkswagen EOS (2007 - 2014) Volkswagen Golf (2004 - 2009 MK5) Volkswagen Golf (2009 - 2013 MK6) Volkswagen Jetta (2006 - 2015) Volkswagen Passat (2006 - 2015) Volkswagen Polo (2006 - 2009) Volkswagen Polo (2010 - 2014) Volkswagen Scirocco (2009 - 2014) Volkswagen Tiguan (2008 - 2014) Volkswagen Transporter T5 (2010 - 2015) Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Powerful Sound, Compact Design – Upgrade Your Ride with the Pioneer GM-DX104 Hi-Res Amplifier! When you're in the need of an ultra-compact, premium quality amplifier, look no further! The Pioneer GM-DX104 is Hi-Res Audio certified, has a LPF/HPF built-in, high-level and low-level inputs and has a 4 x 45W Nom. output. The perfect way to upgrade your factory audio system partnered with some premium speakers! “HI-RES” AUDIO CERTIFIEDPioneer’s new GM-DX874 Class-D digital amplifier is equipped with high quality sound components and tuning and is compatible with “Hi-Resolution” audio allowing simply the highest quality sound reproduction! The perfect partner to Pioneer’s exclusive speaker range, TS-Z Series!*The product with Hi-Res AUDIO logo is conformed to High-Resolution Audio standard defined by Japan Audio Society. The logo is used under license from Japan Audio Society. SMALL BUT POWERFULIt may be small but don’t let the size fool you. The GM-XD104 is capable of delivering up to 400 Watts of maximum output and is more than comfortable providing 45 Watts of power per channel, that’s more than enough to improve the performance of your factory or aftermarket speakers. INSTALL FLEXABILITYToday more and more music lovers are taking their music off-road and finding ways to enjoy their music recreationally. With the GM-DX104 you can add great sound to your motorcycle, ATV, or boat where a conventional size amplifier may not fit. FLEXIBLE CONNECTIVITYFor DIYers, the GM-D1004 amplifier is not only small and powerful but it’s easy to install. Simply connect power and ground at the radio and get more installation flexibility using hi-level or low-level inputs with a signal sensing remote turn on so you can use it in combination with a factory or aftermarket headunit. Pioneer GM-DX104 Features: Hi-Res Audio Certified 400 Watts Max Power Compact Design for Versatile Installation Options Refined Class-D Design Offers Extreme Efficiency and High-Quality Sound Pioneer GM-DX104 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class-D Hi-Res Certified: Yes Bridgeable: Yes Warranty: 12 Month Speaker Level Input: Yes Fuse Rating: 15A Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: Yes Terminal Type: Removable Harness Load Impedance Allowance (Ohms): 2Ω to 8Ω Protection Control System: Yes Dimensions: 181mm(W) x 38mm(H) x 64mm(D) Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 45W x 4 Continuous Power (RMS) Output @ 4Ω: 45W x 4 Continuous Power (RMS) Output – Bridged @ 4Ω: 90W x 1 (3ch) Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12 dB/oct High-Pass Crossover Frequency: 80 Hz Bass Boost Frequency: N/A Bass Boost Level: N/A Audio Specifications Frequency Response: 10 Hz to 40 kHz Total Harmonic Distortion (THD): 0.05% Signal-to-Noise (SN) Ratio: 93 dB Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Everything You Need to Upgrade Your Car's Headunit Complete a full aftermarket double din headunit installation in your Mitsubishi Outlander ZJ, ZK (2013 on) from start to finish with this Aerpro vehicle specific headunit installation kit, containing everything you need for a perfect upgrade in one box. This kit includes: Facia kit, metal brackets, steering wheel control interface and universal patch lead. To make the installation process even easier, simply add Aerpro APP8 or APP9 aftermarket headunit harness adapters which will connect from the aftermarket headunit directly into the steering wheel control interface harness supplied in this kit. Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Highlights: What's In The Box: Highlights: FEATURES: KIT INCLUDES ALL THE PARTS REQUIRED TO COMPLETE AN INSTALLATION OF AN AFTERMARKET HEADUNIT CONVENIENTLY IN ONE BOX SUITABLE FOR SINGLE OR DOUBLE DIN AFTERMARKET HEADUNIT INSTALLATION HIGH QUALITY MATTE BLACK FINISH ON FACIA KIT TO SUIT THE STYLE OF THE DASHBOARD IN THE VEHICLE RETAINS STEERING WHEEL CONTROL FUNCTIONALITY INCLUDING PHONE BUTTON TO SIMPLIFY INSTALLATION, THIS KIT IS COMPATIBLE WITH AERPRO APP8 AND APP9 AFTERMARKET HEADUNIT HARNESS ADAPTERS Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

The Missing Link for Your SWC Install Universal, Compact, Plug & Play Product Overview The Stinger CPLEAD is a 30cm universal patch lead designed to connect Stinger Australia SWC interfaces to popular aftermarket head units. Whether you're completing a fresh install or replacing a damaged or missing lead, the CPLEAD provides the final connection between your steering wheel control interface and the head unit keeping everything plug-and-play. For more versatile applications, the connector can be removed to convert the CPLEAD into a 3.5mm to bare wire harness, enabling use with head units or interfaces that require a direct wire connection rather than a standard plug. It's a simple accessory that solves a common install problem cleanly. Key Specifications Manufacturer Part Number: CPLEAD Cable length: 30cm Connection type: Universal patch lead for SWC interfaces Compatible with: Stinger Australia SWC interfaces; popular branded aftermarket head units Alternative use: 3.5mm to bare wire harness (connector removable) Plug & Play: Yes Colour: Not specified Features & Benefits Universal Compatibility — Designed to work with popular branded aftermarket head units, making it a practical addition to any SWC install without needing to chase down a vehicle-specific lead. Plug & Play — Connects directly between the Stinger SWC interface and the head unit with no modification required for standard installations. Convertible to Bare Wire Harness — The connector can be removed to repurpose the CPLEAD as a 3.5mm to bare wire harness, expanding its use to head units or interfaces that require a direct wire connection. Compact 30cm Length — At 30cm, the lead is sized to run neatly within a dash cavity without excess cable to manage. Replacement or Spare — Useful as a direct replacement for a lost or damaged patch lead, or as a spare for workshop use across multiple installs. Technical Specs Specification Detail Part Number CPLEAD Brand Stinger Cable Length 30cm Connection Type Universal SWC patch lead Plug & Play Yes Connector Removable Yes — converts to 3.5mm to bare wire harness Compatible With Stinger Australia SWC interfaces; popular aftermarket head units Colour Not specified Compatible With / Goes Well With Stinger Australia SWC interfaces (all current HR-series kits) Popular branded aftermarket head units requiring a 3.5mm SWC input Applications requiring a 3.5mm to bare wire harness (connector removed) Frequently Asked Questions What is the Stinger CPLEAD used for? The CPLEAD is a 30cm patch lead that connects a Stinger SWC interface to an aftermarket head unit's SWC input. It provides the final link in a steering wheel control retention install and is compatible with popular branded head units. Can the CPLEAD be used without a Stinger SWC interface? Yes — with the connector removed, the CPLEAD becomes a 3.5mm to bare wire harness that can be used with head units or interfaces requiring a direct wire connection rather than a standard plug. How long is the CPLEAD patch lead? The CPLEAD is 30cm in length, sized to connect neatly within a standard dash cavity between the SWC interface and the head unit without excess cable. Is the CPLEAD compatible with all Stinger HR-series install kits? The CPLEAD is designed for use with existing Stinger Australia SWC interfaces, which includes the HR-series install kit range. Confirm compatibility with your specific interface model before purchase if unsure. Can I use the CPLEAD as a replacement for a lost or damaged patch lead? Yes — the CPLEAD is a universal lead and is suited for use as a direct replacement in any install where the original patch lead has been lost or damaged, provided the head unit accepts the standard connector type. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less