PAC AP4-GM71 AmpPRO Amplifier Integration Interface for Select 2019-2026 GM Vehicles with Bose Complete amplifier integration module and T-harness for installing aftermarket amplifiers in select 2019-2026 GM vehicles with a factory Bose sound system, retaining all factory radio controls and audio features while delivering 6-channel RCA outputs, optical digital output, and wired remote level control. Product Overview The PAC AmpPRO AP4-GM71 is a purpose-built amplifier integration interface designed for select 2019-2026 GM vehicles equipped with a factory Bose audio system. Adding an aftermarket amplifier to these vehicles without a dedicated interface results in the loss of factory audio features, volume-linked control, and system integration. The AP4-GM71 solves this by tapping into the vehicle's data bus via a plug-and-play T-harness, delivering clean, variable RCA outputs to the aftermarket amplifier while fully preserving the factory radio's fit, finish, and feature set — including navigation audio, Bluetooth, OnStar, parking sensor chimes, safety alerts, and infotainment audio. Six-channel RCA pre-outputs (front, rear, and sub) provide up to 5V RMS switchable output, with a wired remote level control knob included for the non-fading subwoofer channels. A data-controlled remote turn-on lead activates the amplifier automatically with the factory radio. An optical Toslink digital output is also included for use with high-end digital signal processors and amplifiers, though no optical cable is supplied. The AP4-GM71 is also configurable via the AmpPRO PC App (Windows only), which allows adjustment of minimum volume level, chime volume, and a 3-band EQ with frequency and Q-factor control. Firmware updates are also delivered through the app. Important: Compatibility requires the vehicle to have a Bose Infotainment system with RPO code IOS, IOT, or IOK. Verify the RPO code on the silver sticker in the glove compartment or by scanning the QR code on the GM label in the driver's door jamb. Features & Benefits 6-Channel RCA Pre-Outputs Provides Left/Right Front, Left/Right Rear, and two non-fading subwoofer RCA outputs. Switchable between 5V and 4V RMS output via dip switch to suit different amplifier input sensitivities. Retains All Factory Radio Controls and Audio Features Preserves factory navigation audio, Bluetooth, OnStar, parking sensor chimes, safety alerts, and infotainment features through the aftermarket amplifier, maintaining the complete factory audio experience. Wired Remote Level Control for Sub Channels Includes a 6-foot wired level control knob for the subwoofer (non-fading) channels, mountable in an accessible location for convenient bass level adjustment. If not connected, the subwoofer channel output defaults to maximum. Data-Controlled Remote Turn-On Lead A data-controlled remote turn-on wire activates the aftermarket amplifier automatically when the factory radio is switched on. Rated at 2A; an external relay is required if higher current draw is needed. Optical Toslink Digital Output A variable 2-channel Toslink optical output is provided for connection to high-end digital processors or amplifiers requiring a digital signal input. No optical cable is included. AmpPRO PC App Configuration (Windows) The optional AmpPRO PC App allows configuration of minimum volume level, chime volume, and a 3-band parametric EQ (Bass, Mid, Treble) with selectable frequency and Q-factor settings, as well as firmware updates. The app is available from PAC and runs on Windows PC only. Compatible with GM Super Cruise The AP4-GM71 is compatible with vehicles equipped with GM's Super Cruise driver assistance feature. Plug-and-Play T-Harness Includes a vehicle-specific T-harness for direct connection to the factory radio harness with no cutting or permanent modification to the factory wiring. Technical Specs Specification Details Brand PAC Part Number AP4-GM71 FAE SKU PACAP4-GM71 Product Type Amplifier Integration Interface and T-Harness RCA Outputs 6-Channel (Front L/R, Rear L/R, Sub x2 Non-Fading) RCA Output Voltage Switchable 5V or 4V RMS (Dip Switch 2) Optical Output Toslink Digital (2-Channel Variable, cable not included) Remote Turn-On Lead Yes (Data-Controlled, 2A rated) Level Control Wired Remote Knob for Sub Channels (6ft cable included) Factory Features Retained Navigation, Bluetooth, OnStar, Chimes, Safety Alerts, Infotainment GM Super Cruise Compatible Yes PC App AmpPRO PC App (Windows only) — Min Volume, Chime Volume, 3-Band EQ, Firmware Updates EQ Bass Frequency 60 / 80 / 100 / 120Hz EQ Mid Frequency 500Hz / 1kHz / 1.5kHz / 2.5kHz EQ Treble Frequency 7.5kHz / 10kHz / 12.5kHz / 15kHz RPO Code Requirement IOS, IOT, or IOK (Bose Infotainment) Installation Plug-and-Play T-Harness, No Wire Cutting Required Vehicle Application Select 2019-2026 GM vehicles with factory Bose (see compatibility table) Compatible With / Goes Well With Important: The AP4-GM71 is only compatible with GM vehicles equipped with a factory Bose Infotainment system with RPO code IOS, IOT, or IOK. Verify your vehicle's RPO code before purchasing. Make Model Year Notes Cadillac CT5 2020-2024 With Bose only Chevrolet Blazer 2019-2025 With Bose only Chevrolet Camaro 2019-2024 With Bose only Chevrolet Colorado 2019-2022 With Bose only Chevrolet Silverado 2019 New model, with Bose only Chevrolet Silverado 2020-2026 With Bose only Chevrolet Silverado HD 2021-2025 With Bose only Chevrolet Suburban 2021-2024 With Bose only Chevrolet Tahoe 2021-2024 With Bose only Chevrolet Traverse 2020-2023 With Bose only GMC Acadia 2020-2023 With Bose only GMC Canyon 2019-2022 With Bose only GMC Sierra 2019-2026 With Bose only GMC Sierra HD 2021-2025 With Bose only GMC Yukon 2021-2024 With Bose only GMC Yukon XL 2021-2024 With Bose only Goes Well With: Aftermarket monoblock or multichannel amplifier RCA Y-adapter (required if running sub output to a 2-channel amplifier input, sold separately) External relay (required if amplifier remote draw exceeds 2A, sold separately) Toslink optical cable for digital processor connection (sold separately) Aftermarket subwoofer or speaker system Frequently Asked Questions How do I know if my GM vehicle is compatible with the AP4-GM71? Your vehicle must be equipped with a Bose Infotainment system with RPO code IOS, IOT, or IOK. To verify, check the silver sticker inside your glove compartment for these RPO codes. If the sticker is not present, scan the QR code on the GM label in the driver's door jamb. RPO codes are listed in alphabetical order in both cases. The AP4-GM71 is not compatible with non-Bose or standard audio system variants of the listed models. Does the AP4-GM71 retain factory features like navigation audio and OnStar? Yes. The AP4-GM71 retains all factory audio features routed through the infotainment system, including navigation prompts, Bluetooth audio, OnStar communications, parking sensor chimes, safety alerts, and other infotainment audio. These signals are passed through to the aftermarket amplifier alongside the primary audio output. What is the AmpPRO PC App and do I need it? The AmpPRO PC App is a free Windows application available from PAC that allows you to configure the minimum volume level, chime volume level, and a 3-band parametric EQ on the AP4-GM71, as well as update the module's firmware. The app is optional — the interface functions without it — but it provides additional fine-tuning capability that is particularly useful for matching the system's output to a custom amplifier installation. The app is Windows only and is not required for basic operation. Do I need an RCA Y-adapter for the subwoofer output? If your amplifier requires two separate RCA inputs for the subwoofer channels, yes. The AP4-GM71 provides a single sub RCA output per channel (two total). If your amplifier has a bridged mono input requiring two RCA connections, an RCA Y-adapter is required and is sold separately. What happens if I do not connect the level control knob? If the supplied wired level control knob is not connected to the interface module, the subwoofer channel output will default to maximum output level at all times. For systems where sub bass level adjustment is needed, the knob should be mounted in an accessible location such as under the dash or in a centre console cavity.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

PAC AP4-CH42 AmpPRO Amplifier Integration RCA Out Kit for Select 2021+ Chrysler, Dodge, Jeep, and RAM Plug-and-play amplifier integration RCA output kit engineered for select 2021-onwards Chrysler, Dodge, Jeep, and RAM vehicles, enabling clean installation of aftermarket amplifiers while retaining the factory radio's original fit, finish, and audio features. Product Overview The PAC AmpPRO AP4-CH42 is a vehicle-specific amplifier integration interface designed to simplify aftermarket amplifier installation in select 2021-onwards Chrysler, Dodge, Jeep, and RAM vehicles with both non-amplified and factory-amplified sound systems. Installing an aftermarket amplifier in these vehicles without a dedicated interface risks loss of factory audio features, volume tracking, and infotainment integration. The AP4-CH42 addresses this by providing RCA outputs that work in conjunction with the factory radio, allowing upgraded amplifiers to be added cleanly without replacing or modifying the factory head unit. The AmpPRO solution retains the factory radio's original fit, finish, and complete feature set, preserving the in-cabin experience while improving audio performance through the aftermarket amplifier. The plug-and-play harness connects directly to the factory radio connector with no wire cutting or permanent modification required. Please note: compatibility covers both factory-amplified and non-amplified variants on some models. Always verify your specific vehicle's factory audio configuration against the compatibility guide before purchasing. Features & Benefits Amplifier Integration for Factory and Non-Amplified Systems Supports installation of aftermarket amplifiers in select vehicles with both factory-amplified and non-amplified audio systems, providing flexibility across different trim and equipment levels of the covered models. Retains Factory Radio Fit, Finish, and Features The factory head unit remains in place and fully operational. Factory audio features including infotainment, navigation audio, and system integration are retained through the aftermarket amplifier. Plug-and-Play Harness Connects directly to the factory radio connector with no wire cutting or permanent modification to the vehicle's original wiring harness, allowing the factory radio to be reinstalled at any time if required. RCA Output Kit Provides RCA pre-amp outputs for connection to an aftermarket amplifier, delivering a clean signal from the factory source unit to the upgraded audio system. Broad Chrysler/Dodge/Jeep/RAM Coverage A single interface solution covering multiple current-generation platforms across four brands sharing compatible connector and data-bus architecture. Technical Specs Specification Details Brand PAC Part Number AP4-CH42 FAE SKU PACAP4-CH42 Product Type Amplifier Integration Interface and RCA Out Kit Factory System Compatibility Non-Amplified and Factory-Amplified Systems Factory Features Retained Yes Installation Plug-and-Play, No Wire Cutting Required Vehicle Application Select 2021+ Chrysler, Dodge, Jeep, and RAM (see compatibility table) Compatible With / Goes Well With The PAC AP4-CH42 is compatible with the following vehicles: Make Model Year Notes Chrysler Pacifica 2021-2022 Dodge Durango 2021 10-inch screen models Dodge Ram Truck 2022-2024 New model with factory amplifier Dodge Ram Truck 2022-2024 Classic model without factory amplifier Jeep Gladiator 2024 Jeep Wrangler 2024-2025 Jeep Wrangler Unlimited 2024-2025 RAM Truck 2022-2024 New model with factory amplifier RAM Truck 2022-2024 Classic model without factory amplifier RAM 2500 2019-2023 5th Gen DT Series Goes Well With: Aftermarket monoblock or multichannel amplifier Aftermarket subwoofer or speaker system External relay (if amplifier remote draw exceeds interface rating, sold separately) RCA Y-adapter for mono amplifier applications (sold separately) Frequently Asked Questions Does the AP4-CH42 work with both factory-amplified and non-amplified models? Yes. The AP4-CH42 is compatible with select variants of the covered models fitted with a factory amplified sound system as well as non-amplified base audio configurations. The "New model" and "Classic model" designations for Dodge/RAM Truck refer to distinct cab or trim configurations — always verify your specific variant against the compatibility guide before purchasing. Will my factory radio and infotainment features still work after installing the AP4-CH42? Yes. The AmpPRO interface retains the factory radio's original fit, finish, and features. The factory head unit remains installed and fully operational, with factory infotainment features preserved through the aftermarket amplifier. Does installation require cutting or modifying my factory wiring? No. The AP4-CH42 connects directly to the factory radio connector via the included plug-and-play harness. No wire cutting or permanent modification to the factory harness is required, allowing the original radio to be reinstalled at any time. What is the difference between the "New model" and "Classic model" listed for Dodge/RAM Truck? For the 2022-2024 Dodge Ram Truck and RAM Truck, PAC distinguishes between the current-generation "New model" body style and the previous-generation "Classic model" body style, which continued in production alongside the new model. These two body styles have different dashboard and wiring configurations. The AP4-CH42 covers both variants. Confirm your vehicle's body style and factory audio configuration before purchasing. Do I need any additional accessories to complete the amplifier installation? The AP4-CH42 provides the interface and RCA outputs required to connect an aftermarket amplifier to the factory system. Depending on your amplifier and installation requirements, you may also need an RCA Y-adapter, an external relay for higher-current remote turn-on, and suitable amplifier wiring. We recommend consulting a qualified car audio installer to identify all required accessories for your specific vehicle and amplifier combination.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

PAC AmpPRO SUB APSUB-CH41 Chrysler/Dodge/Jeep Amplifier Integration Interface Seamless Amplifier Integration for Chrysler, Dodge, Jeep & RAM Vehicles The PAC AmpPRO SUB APSUB-CH41 provides a simple plug-and-play solution to integrate aftermarket amplifiers and subwoofers into select Chrysler, Dodge, Jeep, and RAM factory audio systems. Designed with RCA pre-outs, data integration, and ANC bypass, this interface allows you to upgrade your vehicle’s bass performance without compromising OEM features. Engineered for precision, this kit ensures a hassle-free installation, maintaining full functionality of Bluetooth, navigation audio, and factory controls while adding clean, controlled subwoofer outputs to enhance your sound system. Key Features & Benefits: Plug-and-Play Installation: Includes a vehicle-specific T-harness, eliminating the need for cutting or splicing factory wiring. 2-Channel RCA Output: Clean, high-quality subwoofer pre-outs compatible with nearly all aftermarket amplifiers. Retains OEM Audio Features: Maintains Bluetooth, navigation prompts, and factory audio controls. Integrated Bass Control: Adjust subwoofer volume directly from the supplied controller or OEM infotainment system. Active Noise Cancellation (ANC) Bypass: Includes ANC bypass harness to prevent factory ANC systems from interfering with aftermarket bass performance. Factory Data Integration: Designed to work with CANBUS-controlled amplified systems, including Alpine, Beats, and Harman Kardon setups. Vehicle Compatibility: Select Chrysler Vehicles (with 52-PIN OEM radio connector) Select Dodge Vehicles Select Jeep Vehicles Select RAM Trucks (including models with 12" infotainment screens) Compatible Amplified Systems: Alpine, Beats, Harman Kardon, and unbranded premium audio systems with factory amplifiers. Technical Specifications: Model: APSUB-CH41 SKU: APSUB-CH41 Type: Amplifier integration interface Inputs: Vehicle-specific 52-PIN harness Outputs: 2-channel RCA subwoofer outputs Control Features: Bass frequency adjustment (60Hz, 80Hz, 100Hz, 120Hz) & Bass Q Factor (0.5 / 1 / 1.5 / 2.0) Bypass Support: ANC bypass harness included Power: Plug-and-play from OEM radio connector Packaging: Retail display box Kit Contents: PAC AmpPRO SUB APSUB-CH41 Interface Vehicle-Specific Plug-and-Play T-Harness Subwoofer Level Controller + Harness ANC Bypass Harness Instruction Manual Installation Applications: Factory Audio Integration: Add aftermarket amplifiers without replacing your OEM head unit. Subwoofer System Upgrades: Perfect for powering high-performance subs while retaining stock features. Premium Sound Enhancement: Ideal for upgrading Chrysler, Dodge, Jeep & RAM amplified audio systems. Plug-and-Play Professional Installations: Saves time, avoids wiring modifications, and ensures a clean factory finish. Frequently Asked Questions Does this require cutting or splicing wires?No, the included plug-and-play harness eliminates wire cutting. Can I control the subwoofer from the factory infotainment?Yes, bass control and crossover adjustments are supported directly from the OEM system. Does it work with factory ANC systems?Yes, an ANC bypass harness is included to prevent interference with aftermarket subs. Will this disable Bluetooth or navigation sounds?No, all OEM features remain fully functional. What vehicles are supported?Compatible with select Chrysler, Dodge, Jeep & RAM vehicles with 52-PIN OEM radio connectors.

Read more less

PAC APSUB-FD21 AmpPRO SUB Ford Amplifier Integration Interface Seamless Amplifier & Subwoofer Integration for Select Ford Vehicles The PAC APSUB-FD21 AmpPRO SUB provides a simple plug-and-play solution to integrate aftermarket amplifiers and subwoofers into select Ford vehicles equipped with the premium Sony or Bang & Olufsen (B&O) amplified audio systems. Featuring high-quality 2-channel RCA outputs, full bass control, and vehicle-specific integration, this interface allows you to upgrade your vehicle’s bass performance without replacing your factory radio or compromising OEM features. Engineered for precision and reliability, the APSUB-FD21 retains all essential factory functions including Bluetooth, SYNC, and navigation prompts while delivering clean, controlled subwoofer outputs for a complete sound system upgrade. Key Features & Benefits: Plug-and-Play Installation: Includes a Ford-specific T-harness, eliminating the need for cutting or splicing factory wiring. 2-Channel RCA Output: Clean, high-quality pre-outs designed for aftermarket amplifiers powering subwoofers. Retains OEM Audio Features: Maintains SYNC, Bluetooth streaming, navigation prompts, and factory infotainment integration. Dedicated Bass Control: Includes a flush-mountable bass level controller for precise subwoofer volume adjustments. Premium System Support: Fully compatible with Sony and B&O premium amplified systems equipped with the Ford 52-PIN OEM radio connector. Full Customization: Adjust bass frequency (60Hz, 80Hz, 100Hz, 120Hz) and Q Factor (0.5 / 1 / 1.5 / 2.0) directly from the factory infotainment system. Vehicle Compatibility: Select Ford vehicles with Sony amplified systems (2017+) Select Ford vehicles with Bang & Olufsen (B&O) amplified audio Compatible with SYNC-equipped infotainment systems featuring 8.4” factory displays Note: Requires vehicles with the 52-PIN OEM radio connector and factory-installed premium amplified systems. Technical Specifications: Model: PAC APSUB-FD21 AmpPRO SUB SKU: APSUB-FD21 Type: Amplifier integration interface Inputs: Vehicle-specific 52-PIN factory radio connection Outputs: 2-channel RCA subwoofer outputs Bass Control: Includes wired level control knob + adjustable bass frequency and Q factor Power: Plug-and-play from OEM radio Packaging: Retail display box Kit Contents: PAC APSUB-FD21 AmpPRO SUB Interface Ford-Specific Plug-and-Play T-Harness Subwoofer Level Controller + Harness Instruction Manual Installation Applications: Factory Audio Integration: Add aftermarket amplifiers without replacing the OEM infotainment system. Subwoofer Upgrades: Perfect for adding deeper bass to Sony and B&O systems. Professional Installations: Eliminates wire cutting and delivers a clean, factory-quality fit. Advanced Bass Tuning: Fine-tune your sound with complete crossover and volume control. Frequently Asked Questions Do I need to cut or splice any wires?No, the APSUB-FD21 includes a plug-and-play harness for hassle-free installation. Can I control the subwoofer from my Ford SYNC system?Yes, bass levels, frequency, and Q factor can be controlled directly from the OEM infotainment menu. Does it work with B&O premium systems?Yes, the APSUB-FD21 fully supports Bang & Olufsen systems equipped with factory amplifiers. Will this disable my navigation or Bluetooth?No, the integration retains all factory features and controls. Does it work on non-amplified Ford systems?No, it requires a premium Sony or B&O amplified system to function properly.

Read more less

PAC APSUB-GM61 AmpPRO SUB GM/Holden Amplifier Integration Interface Seamlessly integrate an aftermarket subwoofer into your GM or Holden vehicle with plug-and-play simplicity. The PAC AmpPRO SUB APSUB-GM61 provides a 2-channel RCA output from the factory infotainment system, making it easy to add aftermarket amplifiers and subwoofers without compromising your vehicle’s audio features. Designed for select GM and Holden vehicles with or without a BOSE amplified audio system, this interface ensures maximum compatibility and exceptional sound quality. Key Features & Benefits: Plug-and-Play Integration: Simplifies amplifier installation without cutting or splicing factory wiring. 2-Channel RCA Output: Delivers clean, high-quality sound for aftermarket subwoofers. Full Bass Control: Adjust bass frequency, Q factor, and volume directly from your infotainment system. Includes Subwoofer Controller: Comes with a flush-mountable controller for real-time bass adjustments. Retains Factory Features: Keeps Bluetooth, navigation prompts, and other essential factory audio functions intact. Technical Specifications: Model: APSUB-GM61 SKU: APSUB-GM61 Type: Amplifier Integration Interface Compatibility: Select GM and Holden vehicles (with or without BOSE systems) Channels: 2 RCA Pre-Outs Controller: Flush-mountable subwoofer level controller included Installation: Plug-and-play harness included What's Included in the Kit: Vehicle-Specific Interface with RCA Pre-Outs Vehicle-Specific “T” Harness ANC Microphone Bypass Lead Subwoofer Level Controller Harness + Controller Instruction Manual Installation Applications: Subwoofer Integration: Add aftermarket subwoofers without replacing the factory head unit. Retain OEM Functions: Keep navigation prompts, Bluetooth audio, and OEM vehicle settings. Frequently Asked Questions Does this work with non-BOSE GM radios?Yes, the APSUB-GM61 supports both BOSE and non-BOSE systems, with special handling for non-BOSE audio sources. Do I need to cut factory wires?No, the included plug-and-play harness connects directly to the OEM infotainment system. Can I control bass from my factory head unit?Yes, the interface lets you adjust bass frequency and volume directly from your infotainment controls. Is a bass controller included?Yes, a flush-mountable subwoofer controller is provided for added flexibility. Does it retain Bluetooth and navigation audio?Yes, the APSUB-GM61 maintains all factory features while adding subwoofer integration.

Read more less

PAC CP1-S-TSL1 CAN-Bus Multi Output Plug & Play Interface For Select Tesla Vehicles Unlock multiple analog signal outputs from your Tesla’s CAN-Bus system with the PAC CP1-S-TSL1 — a seamless plug-and-play solution designed to simplify installations without modifying factory wiring. The PAC CP1-S-TSL1 interface connects directly to your Tesla’s CAN-Bus communication network and provides essential analog outputs, including constant power, accessory power, illumination, speed pulse, reverse, ignition, turn signals, high beams, and parking brake triggers. Perfect for adding radar detectors, activating cameras, upgrading sound systems, and more. With a pre-configured plug-and-play harness, installation is quick and clean, keeping your OEM wiring intact. Compatible exclusively with Tesla Model 3 (2019–2022) and Tesla Model Y (2019–2022). Key Features & Benefits: Multi-Output CAN-Bus Integration: Delivers analog outputs for power, triggers, and vehicle signals. Plug & Play Installation: Uses a pre-configured harness for simple, clean, and quick installation. Versatile Signal Outputs: Provides constant power, accessory power, illumination, speed pulse, reverse, ignition, turn signals, high beams, and parking brake outputs. Supports Aftermarket Upgrades: Ideal for integrating radar detectors, sound systems, cameras, and other accessories. Designed for Tesla: Specifically built for select Tesla Model 3 and Model Y vehicles. Technical Specifications: SKU: CP1-S-TSL1 Brand: PAC Type: CAN-Bus Multi Output Interface Compatibility: Tesla Model 3 (2019–2022) & Tesla Model Y (2019–2022) Outputs: Constant power, accessory power, illumination, speed pulse, reverse, ignition, turn signals, high beams, parking brake Installation: Plug-and-play — no cutting or splicing required What's Included in the Kit: Vehicle Interface Module Vehicle Plug & Play Harness Installation Applications: Radar Detector Integration: Supplies clean power and trigger signals. Camera Activation: Enables parking camera and dashcam integration. Audio System Upgrades: Provides necessary triggers for amplifier and sound system installation. Lighting Enhancements: Offers high-beam and illumination outputs for custom lighting setups. Frequently Asked Questions Does this work on all Tesla models?No, it is compatible only with Tesla Model 3 (2019–2022) and Model Y (2019–2022). Will this void my Tesla warranty?No, installation is plug-and-play and does not modify factory wiring. Can I use it for multiple aftermarket upgrades?Yes, its multi-output capability supports a variety of accessories. Do I need to cut or splice wires?No, the included harness allows quick, clean installation. Is professional installation recommended?Yes, for best results and secure integration.

Read more less

PAC HWH816 Factory Harness Adapter Seamlessly integrate your aftermarket stereo system with your factory wiring using the PAC HWH816 Harness Adapter — designed for select Honda vehicles while retaining the factory backup camera functionality. The PAC HWH816 harness adapter provides a true plug-and-play installation experience, eliminating the need to cut or splice factory wiring. It is pre-wired to work perfectly with the PAC SWI-CP2 steering wheel control interface and ensures your vehicle’s OEM backup camera remains functional after upgrading your stereo. Key Features & Benefits: Plug-and-Play Installation: Connects directly to the factory harness — no cutting or splicing required. Retains Factory Backup Camera: Keep your OEM camera working seamlessly with your new stereo. Pre-Wired for PAC SWI-CP2: Ready for easy steering wheel control integration. Factory Fit & Finish: Designed for a clean, secure connection without compromising reliability. Compatible with Multiple Honda Models: Built specifically for select Civic, CR-V, Fit, and HR-V trims. Technical Specifications: Model: HWH816 SKU: HWH816 Brand: PAC Type: Factory Harness Adapter Backup Camera Retention: Yes Pre-Wired Support: Compatible with PAC SWI-CP2 steering wheel control module Installation: Plug-and-play Vehicle Application Guide: Year(s) Make Model Compatible Trims 2016 Honda Civic LX, LX-P 2017-2018 Honda Civic LX, LX-P, Sport 2019 Honda Civic LX, Sport 2020-2021 Honda Civic LX 2017-2021 Honda CR-V LX 2018-2020 Honda Fit All Trims 2018-2021 Honda HR-V All Trims Installation & Applications: Aftermarket Stereo Upgrades: Integrates new head units without cutting factory wiring. Backup Camera Retention: Maintains factory camera functionality after upgrading. Steering Wheel Control Ready: Fully compatible with PAC SWI-CP2 for seamless audio control. Professional-Grade Integration: OEM-style fitment ensures a clean, secure installation. Frequently Asked Questions Does this work with aftermarket stereos?Yes, it’s designed for seamless integration when upgrading your head unit. Will I lose my factory backup camera?No, this harness retains full backup camera functionality. Is it compatible with steering wheel controls?Yes, it’s pre-wired for PAC SWI-CP2 integration. Do I need to cut any wires?No, the harness provides a true plug-and-play solution. Which vehicles are supported?Please refer to the vehicle application guide above for full compatibility.

Read more less

Unleash Your Sound System’s Full Potential with LocPRO ADVANCED! LocPRO ADVANCED line output converters feature incredible input power capabilities, enhanced output controls, and noise isolation countermeasures. Combined with the newest vehicle systems’ compatibility, these features are the gateway for your audio aspirations. PAC LPA-2.4 Features: Steel housing 40V / 400W maximum @ 20kΩ Low pass filter (CH3/4 only) Bass boost (CH3/4 only) Dual variable gain controls Selectable ground (common, ISO or 200Ω) Load selections: 20Ω, 60Ω, 20KΩ Clip indicator Turn-on mode selection (remote and DC) 9.5V Output voltage Removable quick-connect with screw-type terminal Wide range DC offset Optional LPA-REM sold separately Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Add-On Accessory for AmpPRO Interfaces! TOSLINK Adapter For PAC's AmpPRO InterfaceThe APA-TOS1 is a fiber-optic audio output add-on accessory for use with an AmpPRO interface. The APA-TOS1 easily installs in your AmpPRO interface and instantly provides a digital Toslink output. APA-TOS1 is compatible with any brand and length of Toslink cable for connection into a Toslink equipped DSP, or amplifier. PACAPA-TOS1 Benefits: APA-TOS1 Provides A Pure Digital Output For Aftermarket Amplifier & DSP Installation. Digital Audio Signals Are Less Susceptible To Noise/Hiss Or Interference. PACAPA-TOS1 Features: Quick & Easy Installation Into Any AmpPRO Interface. Provides Digital Fiber-Optic Variable Audio Signal Output. Compatible With Toslink Equipped DSP's Or Amplifiers. Note: Toslink Cable Is Not Included. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less