Stinger SMRCA2 Marine/PowerSports RCA Lead, 2m A marine-specific 2-metre RCA interconnect for shorter marine and powersports audio runs tinned OFC conductors, polyethylene dielectric, nickel-plated brass machined connectors, high-rate twisted-pair configuration. Product Overview The Stinger SMRCA2 is a 2-metre marine-grade RCA lead from the Stinger PowerSports range. It shares the same specification as the SMRCA6 tinned OFC conductors for corrosion resistance, polyethylene dielectric for superior signal integrity, high-rate twisted-pair construction for noise rejection, and moulded connectors with machined nickel-plated brass contacts in a shorter 2-metre length suited to compact marine and powersports builds. Features & Benefits Tinned OFC conductors — corrosion resistance in salt, humidity, and moisture Polyethylene dielectric for superior signal integrity High-rate twisted-pair construction for ultimate noise rejection Moulded connectors with machined nickel-plated brass contacts for corrosion resistance Flexible PVC outer jacket — easy routing through tight spaces 2-metre length — suited to compact marine and powersports builds Technical Specs Specification Detail SKU / Part Number SMRCA2 Brand Stinger Series PowerSports / Marine Length 2m Conductor Type Tinned OFC (Oxygen-Free Copper) Dielectric Polyethylene Construction High-rate twisted-pair Connector Moulded with machined nickel-plated brass contacts Jacket Flexible PVC Channels Not confirmed — contact F.A.E. Compatible With / Goes Well With Direct Vehicle Fit: Universal — suitable for marine, boat, and powersports audio installations Goes Well With: Stinger SPX350X2 2-channel powersports amplifier Stinger SEA4283 / SEA4287 marine 8GA amplifier wiring kits (shorter build pairing) Stinger SVTK4681 Harley-Davidson amplifier wiring kit Stinger SMRCA6 (6m version — for larger marine builds) Marine and powersports head units Frequently Asked Questions What is the difference between the SMRCA2 and the SMRCA6? Both are marine-grade RCA leads with the same specification — tinned OFC conductors, polyethylene dielectric, nickel-plated brass connectors, and high-rate twisted-pair construction. The SMRCA2 is 2 metres for compact builds and shorter component-to-amplifier runs; the SMRCA6 is 6 metres for larger builds. Choose based on the cable run length required. What makes this RCA cable suitable for marine use? The SMRCA2 uses tinned OFC conductors (corrosion-resistant), polyethylene dielectric (moisture-resistant), and nickel-plated brass connectors — all specifically chosen for reliability in salt, humidity, and water exposure that would quickly degrade standard automotive RCA cables. Is 2m sufficient for most marine or powersports installations? 2 metres suits compact marine installations or powersports builds where the head unit and amplifier are in close proximity — such as in a Harley-Davidson touring fairing. For larger boats or longer runs, the SMRCA6 (6m) is recommended. What is the channel configuration of this cable? Channel configuration is not confirmed in the available supplier data. Contact the F.A.E. team to confirm before purchasing. Can this RCA cable be used in a standard automotive installation? Yes. The SMRCA2 is fully suitable for standard automotive amplifier installations where marine-grade corrosion resistance and superior signal quality are required. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SI6217 6000 Series 2-Channel OFC/Silver RCA Interconnect, 5m Premium 2-channel RCA interconnect from the Stinger 6000 Series triple-twisted OFC/silver conductors, Mylar shielding, precision-machined locking connectors in blue anodised finish. 5 metres. Lifetime warranty. Product Overview The Stinger SI6217 is the 5-metre (17ft) 2-channel version of the 6000 Series RCA interconnect range. It upgrades over the 4000 Series with triple-twisted OFC/silver conductors for enhanced clarity, Mylar shielding for superior noise rejection, and precision-machined locking metal connectors in blue anodised finish. C3 Tech (Continuous Connection Construction), Shoc-Krome plated split-tip connectors, directional twisted-pair construction, moulded strain reliefs, and colour-coded channel identification are all included. Backed by Stinger's lifetime performance warranty. Features & Benefits Triple-twisted OFC/silver conductors — enhanced clarity and reduced resistance Mylar shielding + directional twisted-pair construction — superior noise rejection Precision-machined locking metal connectors — blue anodised finish C3 Tech (Continuous Connection Construction) for unmatched signal transfer Shoc-Krome plated split-tip connectors Colour-coded channel identification inside the RCA barrel Moulded strain reliefs for connector durability Blue protective jacket — reduces friction for easy installation 5-metre (17ft) length, 2-channel Lifetime performance warranty Technical Specs Specification Detail SKU / Part Number SI6217 Brand Stinger Series 6000 Series Channels 2-channel Length 5m (17ft) Conductor Type Triple-twisted OFC/Silver Shielding Mylar + directional twisted-pair Connector Type Precision-machined locking metal Connector Finish Blue anodised Connector Plating Shoc-Krome (split-tip) Signal Technology C3 Tech (Continuous Connection Construction) Jacket Blue protective jacket Warranty Lifetime performance warranty Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any car audio component with standard RCA inputs/outputs Goes Well With: 2-channel or mono car audio amplifiers Stinger SK4241 / SK4281 / SK4201 4000 Series amplifier wiring kits Stinger SI6417 6000 Series 4-channel RCA (for full 6000 Series front/rear + sub build) Stinger 4000 Series speaker wire Frequently Asked Questions What is the difference between the SI6217 and the SI429 (4000 Series)? Both are 5m 2-channel RCA cables. The SI6217 (6000 Series) adds triple-twisted OFC/silver conductors, Mylar shielding, and precision-machined locking metal connectors — upgrades over the 4000 Series' OFC-only conductors, no Mylar shielding, and non-locking connectors. The 6000 Series is the premium choice for audiophile or high-powered builds. What is the benefit of OFC/silver conductors over standard OFC? Silver is the most conductive metal available. The triple-twisted OFC/silver blend reduces resistance beyond standard OFC alone — delivering marginally lower signal loss and improved high-frequency detail, particularly relevant in high-resolution car audio systems. What does the locking connector do? The locking connector grips the female RCA socket mechanically to prevent accidental disconnection from vibration — an important feature in a vehicle environment where road vibration is constant. Does the SI6217 carry a warranty? Yes. Stinger offers a lifetime performance warranty on the 6000 Series against manufacturer defects. Can I use the SI6217 for a subwoofer (mono) connection? Yes. One channel of the 2-channel cable can be used for a mono subwoofer connection where the amplifier supports a dedicated mono or bridged input. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SI4417 4000 Series 4-Channel RCA Interconnect, 5m Audiophile-grade 4-channel RCA interconnect from the Stinger 4000 Series C3 Tech, Shoc-Krome split-tip connectors, and directional twisted-pair construction for interference rejection. 5 metres (17ft). Product Overview The Stinger SI4417 is the 4-channel, 5-metre (17ft) version of the 4000 Series RCA interconnect range. With two stereo channel pairs, it is designed for 4-channel amplifiers delivering front and rear speaker outputs from a single head unit connection. Built with C3 Tech (Continuous Connection Construction) for unmatched signal transfer, Shoc-Krome plated split-tip connectors, directional twisted-pair winding for interference rejection, and a clear flexible jacket with colour-coded channel identification for easy installation. Features & Benefits 4-channel (2 stereo pairs) — suits 4-channel amplifiers with front and rear outputs C3 Tech (Continuous Connection Construction) for unmatched signal transfer Shoc-Krome plated split-tip connectors for superior contact and signal transfer Directional twisted-pair construction — protection against interference Compact connector design and clear flexible jacket for easy installation Colour-coded channel identification Molded strain reliefs for connector durability 5m (17ft) length Technical Specs Specification Detail SKU / Part Number SI4417 Brand Stinger Series 4000 Series Channels 4-channel (2 stereo pairs) Length 5m (17ft) Connector Plating Shoc-Krome (split-tip) Construction Directional twisted-pair Jacket Clear flexible PVC with colour-coded channel identification Signal Technology C3 Tech (Continuous Connection Construction) Strain Relief Moulded Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any car audio component with standard RCA inputs/outputs Goes Well With: 4-channel car audio amplifiers (front and rear speaker outputs) Stinger SK4241 / SK4681 4000 Series amplifier wiring kits (4GA — natural pairing) Stinger STK4 4-channel amplifier wiring kit Stinger 4000 Series speaker wire Frequently Asked Questions What is a 4-channel RCA interconnect used for? A 4-channel RCA carries two stereo pairs — front left/right and rear left/right — in a single cable assembly. It is the standard cable for 4-channel amplifiers providing both front and rear speaker outputs from the head unit. What is C3 Tech (Continuous Connection Construction)? C3 Tech is Stinger's proprietary construction method ensuring the conductor maintains continuous contact with the connector body without micro-breaks or gaps — providing lower resistance and more consistent signal transfer. What is the difference between the SI4417 and the SI4617? The SI4417 is a 4-channel cable (2 stereo pairs) for 4-channel amplifiers. The SI4617 is a 6-channel cable (3 stereo pairs) for 5-channel amplifiers or 3-way crossover systems with an additional subwoofer output. What is the difference between the SI4417 and the SI429? The SI429 is a 2-channel RCA (one stereo pair), suited to single stereo or mono amplifier connections. The SI4417 is a 4-channel RCA (two stereo pairs) for 4-channel amplifiers. Both are from the 4000 Series with the same construction quality. Is the SI4417 directional? Yes. Like other 4000 Series cables, the SI4417 uses directional twisted-pair construction — the cable should be installed with signal flowing in the indicated direction (from head unit to amplifier) for optimal interference rejection. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SI42YM 4000 Series RCA Y-Adapter, 1 Female to 2 Male (30cm) Provides two male RCA outputs from one female RCA input OFC conductors, C3 Tech, Shoc-Krome split-tip connectors. 30cm, part of the 4000 Series range. Product Overview The Stinger SI42YM is a 4000 Series RCA Y-adapter that accepts one female RCA socket and provides two male RCA plugs. At 30cm, it is used to split a single female RCA input feeding a signal from one source into two separate amplifiers or devices, from the socket end rather than the plug end. Built with OFC conductors, C3 Tech, Shoc-Krome plated split-tip connectors, and directional twisted-pair construction the same 4000 Series specification as the full RCA interconnect and SI42YF range. Features & Benefits Provides two male RCA outputs from one female RCA input OFC conductors for excellent signal quality C3 Tech (Continuous Connection Construction) for unmatched signal transfer Shoc-Krome plated split-tip connectors Directional twisted-pair construction for interference rejection Colour-coded channel identification Moulded strain reliefs 30cm cable length Technical Specs Specification Detail SKU / Part Number SI42YM Brand Stinger Series 4000 Series Configuration 1× female RCA to 2× male RCA (Y-splitter) Length 30cm Conductor Type OFC (Oxygen-Free Copper) Connector Plating Shoc-Krome (split-tip) Construction Directional twisted-pair Signal Technology C3 Tech Weight 74g Package Dimensions 14cm × 15cm × 2cm Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any standard female RCA socket Goes Well With: Stinger 4000 Series RCA cables (SI429, SI4212, etc.) Stinger SI42YF (female Y-adapter — the complementary version) Car audio amplifiers and signal processors with RCA inputs Head units or processors with female RCA outputs requiring dual amplifier feed Frequently Asked Questions What is a 1-female to 2-male RCA Y-adapter used for? The SI42YM accepts a female RCA socket — such as the output socket on a processor or the end of an RCA cable — and provides two male RCA plugs, allowing two amplifiers or devices to be connected from a single source. Common uses include splitting a processor output to feed two amplifiers, or duplicating a signal to two separate destinations. What is the difference between the SI42YM and the SI42YF? The SI42YM is 1× female to 2× male — it plugs into a female socket and provides two male plug outputs. The SI42YF is 1× male to 2× female — it presents a male plug and provides two female socket outputs. Use SI42YM when splitting from a female-terminated output; use SI42YF when splitting from a male-terminated cable end. Does splitting the signal degrade audio quality? Splitting an RCA signal introduces a small impedance change at the split point. In typical car audio applications with modern amplifiers, this is negligible. The 4000 Series construction minimises resistance and noise at the split. Is the 30cm length sufficient? At 30cm, the SI42YM is designed to sit at a connection point — not as an extension cable. For longer runs after the split, connect standard RCA cables to the two male plug outputs via female sockets on the receiving devices. Is the SI42YM from the same range as the standard 4000 Series RCA cables? Yes. The SI42YM uses the same OFC conductors, C3 Tech, Shoc-Krome split-tip connectors, and directional twisted-pair construction as the full 4000 Series RCA cable and adapter range. Weight 0.074 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SI42YF 4000 Series RCA Y-Adapter, 1 Male to 2 Female (30cm) Splits one male RCA output into two female RCA inputs OFC conductors, C3 Tech, Shoc-Krome split-tip connectors. 30cm, part of the 4000 Series range. Product Overview The Stinger SI42YF is a 4000 Series RCA Y-adapter that converts one male RCA plug into two female RCA sockets. At 30cm, it is used to split a single RCA output (such as a mono subwoofer preout from a head unit) into two inputs for example, feeding two separate mono amplifiers, or providing a signal to both a subwoofer amplifier and a line driver. Built with OFC conductors, C3 Tech, Shoc-Krome plated split-tip connectors, and directional twisted-pair construction the same 4000 Series specification as the full RCA interconnect range. Features & Benefits Splits one male RCA output into two female RCA inputs OFC conductors for excellent signal quality C3 Tech (Continuous Connection Construction) for unmatched signal transfer Shoc-Krome plated split-tip connectors Directional twisted-pair construction for interference rejection Colour-coded channel identification Moulded strain reliefs 30cm cable length Technical Specs Specification Detail SKU / Part Number SI42YF Brand Stinger Series 4000 Series Configuration 1× male RCA to 2× female RCA (Y-splitter) Length 30cm Conductor Type OFC (Oxygen-Free Copper) Connector Plating Shoc-Krome (split-tip) Construction Directional twisted-pair Signal Technology C3 Tech Weight 74g Package Dimensions 14cm × 15cm × 2cm Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any standard male RCA plug Goes Well With: Stinger 4000 Series RCA cables (SI429, SI4212, etc.) Head units with mono subwoofer preout requiring dual amplifier feed Stinger SI42YM (male Y-adapter — the complementary version) Car audio amplifiers and signal processors with RCA inputs Frequently Asked Questions What is a 1-male to 2-female RCA Y-adapter used for? The SI42YF takes one male RCA plug from a cable end and provides two female RCA sockets — allowing you to feed two amplifiers or two inputs from a single RCA output on a head unit or processor. Common uses include: splitting a mono subwoofer output to two mono amplifiers, or feeding both a main amplifier and a line driver from the same source channel. Does splitting the signal degrade audio quality? Splitting an RCA signal introduces a small impedance change at the split point. In typical car audio applications with modern amplifiers, this is negligible. The 4000 Series construction minimises additional resistance and noise at the split. What is the difference between the SI42YF and the SI42YM? The SI42YF is 1× male to 2× female — it receives a male plug and provides two female sockets. The SI42YM is the opposite orientation (1× female to 2× male) — it receives a female socket and provides two male plugs. Use SI42YF when splitting a cable output; use SI42YM when providing two outputs from a female input. Is the 30cm length sufficient? At 30cm, the SI42YF is designed to sit at a connection point where splitting occurs — not as an extension cable. For longer runs after the split, connect standard RCA cables to the two female outputs. Is the SI42YF from the same range as the standard 4000 Series RCA cables? Yes. The SI42YF uses the same OFC conductors, C3 Tech, Shoc-Krome split-tip connectors, and directional twisted-pair construction as the full 4000 Series RCA cable range. Weight 0.074 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SI429 4000 Series 2-Channel 9ft RCA Interconnect Cable Audiophile-grade OFC conductors, C3 continuous connection technology, and directional twisted-pair construction a high-performance 2-channel RCA cable built to keep your signal clean across a 9-foot run. Product Overview The Stinger SI429 is a 9-foot (2.7m) 2-channel RCA interconnect cable from the Stinger 4000 Series range. It is designed for connecting head units to amplifiers, delivering strong noise rejection, true channel separation, and improved frequency response in a flexible, easy-to-route package. At the core of the SI429 is Stinger's C3 Technology (Continuous Connection Construction), which ensures uninterrupted signal transfer between connectors. Oversized OFC (Oxygen Free Copper) conductors provide excellent conductivity, while directional twisted-pair construction shields against interference. Shoc-Krome plated split-tip connectors ensure a secure, low-resistance connection at both ends. Features & Benefits Oversized OFC conductors for excellent sound quality and conductivity C3 Technology (Continuous Connection Construction) for unmatched signal transfer Split-tip connectors for improved signal contact and transfer Directional twisted-pair construction for protection against electromagnetic interference Twisted-pair winding improves clarity and broadens dynamic range Shoc-Krome plated connectors for reliable, corrosion-resistant signal transfer Moulded strain reliefs for extra durability at connection points Minimalistic clear protective jacket reduces friction for easy routing Colour-coded channel identification for correct polarity and channel assignment Compact connector design for tight installs Technical Specs Specification Detail SKU / Part Number SI429 Brand Stinger Series 4000 Series Cable Length 9ft (2.7m) Channels 2-Channel Conductor Material OFC (Oxygen Free Copper) Connector Plating Shoc-Krome Connector Type Split-tip Construction Directional twisted-pair Signal Technology C3 (Continuous Connection Construction) Jacket Clear flexible protective jacket What's in the Box 1x Stinger 4000 Series 9ft / 2.7m 2-Channel RCA Cable Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any head unit and amplifier with standard RCA connections Goes Well With: Car amplifiers (2-channel, 4-channel, monoblock) Aftermarket head units with RCA pre-outs Signal processors and DSP units with RCA inputs Other Stinger 4000 Series wiring accessories Frequently Asked Questions What is C3 Technology and why does it matter? C3 stands for Continuous Connection Construction — Stinger's method of ensuring the signal conductor maintains an unbroken connection from one end of the cable to the other. This reduces signal loss and improves frequency response compared to cables with inconsistent internal connections. What is the difference between OFC and standard copper conductors? OFC (Oxygen Free Copper) has a higher purity level than standard copper, which means lower electrical resistance and better signal transfer. For audio applications, this translates to cleaner sound with less degradation over the length of the cable run. What does the split-tip connector do? The split-tip connector design creates multiple contact points with the RCA jack rather than a single point, improving signal transfer and reducing the chance of a loose or intermittent connection over time. Is this cable directional? Yes. The SI429 uses directional twisted-pair construction, meaning it is designed to be installed in a specific direction for optimal interference rejection. The cable should be routed from the source (head unit) to the destination (amplifier) in the direction indicated. Is a 2-channel cable sufficient for a 4-channel amplifier? A 2-channel RCA cable provides two signal channels (left and right). Most 4-channel amplifiers can accept a 2-channel input and bridge internally to drive all four channels. However, if your amplifier requires independent front and rear RCA inputs, a 4-channel RCA cable will be needed instead. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SI4212 4000 Series 2-Channel RCA Interconnect, 3.6m Audiophile-grade 2-channel OFC RCA interconnect from the Stinger 4000 Series C3 Tech, split-tip connectors, directional twisted-pair construction. 3.6 metres for compact vehicle installations. Product Overview The Stinger SI4212 is the 3.6-metre (approximately 12ft) 2-channel version of the 4000 Series RCA interconnect range. It shares the same construction quality as the SI429 (5m) and SI4220 (6m) OFC conductors, C3 Tech, directional twisted-pair shielding, and split-tip connectors in a shorter 3.6-metre length suited to compact cars, hatchbacks, and installations where the amplifier is mounted close to the head unit. Features & Benefits 2-channel OFC RCA — suited to stereo or mono amplifier connections C3 Tech (Continuous Connection Construction) for unmatched signal transfer Split-tip connectors for superior contact and signal transfer Directional twisted-pair construction — interference rejection Compact connector ends with colour-coded channel identification 3.6-metre length — suited to compact vehicles and short cable runs Technical Specs Specification Detail SKU / Part Number SI4212 Brand Stinger Series 4000 Series Channels 2-channel Length 3.6m (approx. 12ft) Conductor Type OFC (Oxygen-Free Copper) Connector Split-tip Construction Directional twisted-pair Signal Technology C3 Tech (Continuous Connection Construction) Jacket Clear flexible PVC, colour-coded Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any car audio component with standard RCA inputs/outputs Goes Well With: Stinger SK4241 / SK4281 4000 Series amplifier wiring kits 2-channel or mono car audio amplifiers in compact installations Stinger 4000 Series speaker wire Stinger SI4217 / SI429 / SI4220 (longer 4000 Series RCA options for larger vehicles) Frequently Asked Questions When would I choose the SI4212 over the longer 4000 Series RCA cables? The SI4212 at 3.6m suits compact cars and hatchbacks where the amplifier is in the boot close to the rear seats — a typical run of 3–4 metres. Choosing a cable matched to the actual run length avoids excess cable bundling and the associated noise risk. For standard sedans (5m) or larger vehicles (6m), see the SI429 or SI4220. What is C3 Tech? C3 Tech (Continuous Connection Construction) is Stinger's proprietary method ensuring the conductor maintains continuous contact with the connector — reducing resistance and improving signal consistency throughout the cable. Is the SI4212 directional? Yes. The SI4212 uses directional twisted-pair construction and should be installed with signal flowing from the head unit to the amplifier for optimal noise rejection. Can I use the SI4212 for a subwoofer (mono) connection? Yes. One channel of the 2-channel cable can be used for a mono subwoofer connection where the amplifier supports a dedicated mono input. What if 3.6m is too short for my vehicle? For longer cable runs, see the Stinger SI429 (5m), SI4217 (5m), or SI4220 (6m) — all from the same 4000 Series range with identical construction quality. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6 Foot (1.8 Metre) Twisted Pair RCA Signal Cable OFC, Platinum Ends, RFI/EMI Rejection, Split Center Pin, Frosted Shield. The Rockford Fosgate RFI-6 is a 6-foot (1.8-metre) twisted pair RCA signal cable the shortest length in the RFI series. Same construction as the RFI-10, RFI-16, and RFI-20: OFC conductors, platinum-plated ends, twisted pair RFI/EMI rejection, split center pin, and frosted woven outer shield. At 1.8 metres, the RFI-6 suits very short runs amplifiers mounted close to the head unit, in-dash or under-seat installations, or secondary connection runs between components in the same location. Key Specifications Specification Detail Part Number RFI-6 Type RCA Signal Cable Length 6 feet (1.8 metres) ✓ Conductor OFC ✓ End Plating Platinum ✓ Design Twisted Pair ✓ Shield Woven, frosted ✓ Noise Rejection RFI and EMI ✓ Center Pin Split ✓ Channels Not confirmed Warranty Not confirmed — confirm with Rockford Fosgate (RFI-10 confirmed 1yr) Features & Benefits 6 Feet / 1.8 Metres — Short-Run Application — The shortest length in the RFI range — suited to under-seat amplifier installations, very compact vehicles, or secondary runs between adjacent components where longer cables would create excess slack. Twisted Pair RFI/EMI Rejection — Even over short runs, twisted pair construction reduces interference susceptibility. OFC Conductors + Platinum Ends — Full-spec signal cable regardless of length. Split Center Pin — Secure connection at both ends. FAQs How does the RFI-6 fit in the RFI range? The RFI series runs: RFI-6 (6ft / 1.8m), RFI-10 (10ft / 3m), RFI-16 (16ft / 4.8m), RFI-20 (20ft / 6m). All are identical in construction — select the length that matches your routing requirement. The RFI-6 is the shortest option for tight installations. Does the RFI-6 have a warranty? Not confirmed in the supplier data. The RFI-10 carries a confirmed 1-year warranty — confirm whether the same applies to the RFI-6 from the official product page. Is the cable stereo or mono? Not confirmed — confirm from the official Rockford Fosgate RFI-6 product page. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

X3 Series Flagship 2-Channel RCA Interconnect 17ft, Silver-Plated Pure OFC, Lock Tip Quad-Clamp Locking Connectors, Dual-Layer I.D. Shielding, C3 Tech, Body Armor Protection. Product Overview The Stinger XI3217 is the flagship X3 Series 17-foot (approximately 5.2-metre) 2-channel RCA interconnect positioned above the 8000 Series SI8217 in the Stinger range and engineered for high-performance installations where the signal cable must match the capability of the amplifier it serves. At 17 feet, it covers the full head-unit-to-boot-amplifier run in most vehicles with cable to spare for routing around obstacles. The X3 design addresses every major source of signal degradation in a car audio RCA connection. Silver-plated pure OFC conductors optimise performance across the full audio frequency range. Lock Tip Quad-Clamp locking RCA connectors with a precision 4-cut contact physically lock onto the socket, eliminating the intermittent contact caused by vibration-loosened push-fit connectors. I.D. (Interference Defense) dual-layer shielding combines an inner Mylar foil layer for external EMI rejection with an outer copper mesh layer for conducted noise rejection two separate shielding mechanisms targeting two different noise sources. Directional double twisted-pair construction with three conductors per channel (positive, negative, signal drain) completes the signal path architecture. C3 Tech ensures no breaks or discontinuities throughout the full 17-foot length. Body Armor nylon-woven outer protection covers the flexible PVC inner cable for mechanical durability in installation and beyond. Key Specifications SKU: XI3217 Series: X3 Channels: 2 Length: 17 feet (approximately 5.2 metres) Conductor: Silver-plated pure OFC copper, finely stranded Conductor construction: Double twisted-pair, directional Noise cancellation: Directional twisted-pair architecture Shielding: Dual-layer — inner Mylar EMI foil + outer copper mesh Connector type: Lock Tip Locking RCA — Quad-Clamp 4-cut Construction method: C3 Tech (Continuous Connection Construction) Outer protection: Body Armor — nylon-woven over PVC Conductors per channel: 3 (positive, negative, signal drain) Warranty: Not specified — confirm with Stinger Features & Benefits Lock Tip Quad-Clamp 4-Cut Locking RCA Connectors The Lock Tip connector combines a rotational locking end with a precision 4-cut Quad-Clamp contact — physically clamping and locking onto the RCA socket with the highest possible contact force. Standard push-fit connectors rely on friction only and loosen under vibration, introducing intermittent noise and signal dropout. The Lock Tip design eliminates this failure mode entirely — the most common source of noise in car audio signal chains. Silver-Plated Pure OFC Conductors Pure OFC (Oxygen-Free Copper) eliminates the oxidation-related signal degradation of standard copper conductors. Silver plating each individual strand further reduces surface resistance — where the majority of high-frequency audio signal travels due to the skin effect — optimising performance across the full 20Hz–20kHz audio spectrum. The combination delivers tight bass response and crystal-clear high-frequency detail over the full 17-foot run. I.D. Dual-Layer Interference Defense Shielding Two independent shielding layers target two different noise sources simultaneously. The inner Mylar foil layer rejects radiated electromagnetic interference from external sources — alternators, ignition systems, and mobile devices. The outer copper mesh layer absorbs conducted radiated noise generated within the cable's own conductors. A single-layer shield addresses only one source; the XI3217's dual-layer design addresses both. Directional Double Twisted-Pair Construction — Three Conductors per Channel Three conductor bundles per channel — positive, negative, and signal drain — are arranged in a directional double twisted-pair architecture that uses the physics of twisted-pair noise cancellation to reject interference. The directional design means the cable is installed in a specific orientation for maximum noise rejection. Separate signal drain conductor isolates the shield drain from the audio return path. C3 Tech — Continuous Connection Construction Stinger's C3 Tech ensures no micro-discontinuities, solder joints, or resistance variations throughout the full 17-foot length — providing consistent signal transfer from source unit to amplifier. Body Armor Nylon-Woven Outer Protection High-strength nylon fibres woven over a flexible PVC inner cable provide mechanical protection against the sharp metal edges, vibration fatigue, and moisture ingress encountered during vehicle installation — and throughout the life of the cable in an automotive environment. Technical Specs Specification Detail Brand Stinger SKU XI3217 Series X3 Channels 2 Length 17 feet (approx. 5.2 metres) Conductor Silver-Plated Pure OFC Copper, Finely Stranded Conductor Construction Double Twisted-Pair, Directional Conductors per Channel 3 (positive, negative, signal drain) Shielding Dual-Layer: Mylar EMI Foil + Copper Mesh Connector Type Lock Tip Locking RCA — Quad-Clamp 4-Cut Construction Method C3 Tech Noise Cancellation Directional Twisted-Pair Architecture Outer Protection Body Armor — Nylon-Woven over PVC Warranty Not confirmed — confirm with Stinger Compatible With / Goes Well With Suitable for: High-performance amplifier installations where signal cable quality must match a premium amplifier's noise floor and dynamic range Full-length vehicle runs from dash-mounted head unit to boot-mounted amplifier in most passenger cars, SUVs, and medium-sized vans Installations where Lock Tip locking connectors are preferred over standard push-fit for vibration-resistant signal integrity Pairs well with: Rockford Fosgate, Hertz, Morel, and AudioControl premium amplifiers Stinger SI8212 (12ft / 3.7m) 8000 Series for shorter runs where the same installation quality is required at a reduced length Stinger SI82YF and SI82YM Y-adapters if a consistent Stinger build across all RCA connections is required Frequently Asked Questions What is the benefit of silver-plated conductors over standard OFC copper? Standard OFC copper provides low resistance and solid signal transfer. Silver plating each individual OFC strand reduces surface resistance further — where the majority of high-frequency audio signal travels due to the skin effect. This optimises performance across the full 20Hz–20kHz range, particularly at higher frequencies where signal integrity matters most. How do the Lock Tip locking RCA connectors differ from standard RCA connectors? A standard push-fit RCA connector relies on friction to maintain contact — which loosens under vibration and causes intermittent noise or signal dropout. The Lock Tip connector adds a rotational locking mechanism and a Quad-Clamp 4-cut contact that physically clamps onto the RCA socket, maintaining consistent contact force regardless of vibration, temperature cycling, or mechanical stress. What does dual-layer shielding provide that a single shield does not? A single shielding layer typically targets either radiated external interference or conducted internal noise. The XI3217's inner Mylar foil layer specifically rejects external EMI from alternators and ignition systems, while the outer copper mesh layer absorbs conducted noise generated within the cable's own conductors — each layer targeting a different noise source for substantially better total rejection than either alone. What does the directional construction mean, and how do I install it correctly? The directional twisted-pair architecture cancels noise most effectively when signal flows from source unit to amplifier. Directional markings on the cable indicate the correct orientation. Installing in reverse does not damage the cable but reduces the effectiveness of the noise-cancelling architecture. Is 17 feet sufficient for most vehicle installations? At 17 feet (approximately 5.2m), the XI3217 covers the full head-unit-to-boot-amplifier run in most passenger cars, SUVs, and medium-sized vans with cable to spare. For very large vehicles or installations where the routing path adds significantly to the direct distance, measure the intended routing path before purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

8000 Series 2-Channel Triple Shielded RCA 17ft, Oversized Silver-Plated Copper, Triple-Braided + Mylar Shielding, Locking Split-Tip Connectors, 3 Conductors per Channel, C3 Tech. Product Overview The Stinger SI8217 is a 17-foot (5-metre) 2-channel audiophile-grade RCA interconnect from the 8000 Series engineered for installations where signal quality is the priority and the routing distance demands a longer run. At 17 feet, the SI8217 covers the full head-unit-to-boot-amplifier run in most vehicles including SUVs, wagons, and vans, with cable to spare for routing around obstacles, through door sills, and along body creases. Oversized silver-plated copper conductors use three conductors per channel separate positive, negative, and signal drain paths ensuring true channel separation and a low-impedance signal return across the full 5-metre length. Triple-braided shielding combined with an inner Mylar foil layer provides multi-directional noise rejection critical over a longer cable run where interference exposure is greatest. A directional high-rate double twisted-pair construction adds a further architectural layer of noise cancellation. Precision machined pewter-finish locking metal ends with channel identification, locking split-tip connectors, no solder joints, moulded strain reliefs, and C3 Tech (Continuous Connection Construction) complete the build. Key Specifications SKU: SI8217 Series: 8000 Series Channels: 2 Length: 17 feet (5 metres) Conductor: Oversized silver-plated copper Conductors per channel: 3 (positive, negative, signal drain) Total conductors: 6 Construction: Directional high-rate double twisted-pair Shielding: Triple-braided + Mylar foil Connector type: Locking split-tip RCA Connector finish: Pewter Connector end: Precision machined locking metal with channel ID Solder joints: None Strain relief: Moulded Outer jacket: Black mesh protective Construction method: C3 Tech (Continuous Connection Construction) Warranty: Not specified — confirm with Stinger Features & Benefits 17-Foot Length — Full Vehicle Run for Larger Vehicles At 17 feet (5 metres), the SI8217 provides sufficient length for boot-mounted amplifier installations in SUVs, wagons, and vans where a 12-foot cable falls short. The additional length allows for clean routing along the full B-pillar-to-boot path, with slack to avoid tight bends at cable entry points. Oversized Silver-Plated Copper Conductors Oversized silver-plated copper combines the high-frequency precision of silver with the current-carrying capacity of copper — delivering tight, controlled bass response and crystal-clear high-frequency detail across the full 20Hz–20kHz audio spectrum and beyond. Over a 17-foot run, conductor quality has a measurably greater impact on signal integrity than over a short run. Triple-Braided + Mylar Shielding — Critical Over Long Runs A 17-foot cable has significantly more exposure to electromagnetic interference than a 6-foot cable — passing along a greater portion of the vehicle's wiring, alternator, and ignition interference sources. Three independent braided layers cascade over each other, with each covering any gaps in the layer beneath, combined with an inner Mylar foil layer for multi-directional noise rejection from both radiated and conducted sources. Three Conductors per Channel — True Channel Separation Dedicated positive, negative, and signal drain conductors per channel separate the shield drain from the audio signal return — eliminating the noise interaction that occurs when these paths share a single conductor in a standard two-conductor design. Directional High-Rate Double Twisted-Pair Construction The directional double twisted-pair winding is orientated to maximise noise cancellation when signal flows from source unit to amplifier. Directional markings indicate correct orientation. The architectural noise cancellation of the twisted-pair geometry is particularly effective over longer cable runs. C3 Tech — No Breaks Over the Full 17 Feet Stinger's C3 (Continuous Connection Construction) ensures no breaks, solder joints, or resistance discontinuities throughout the entire 17-foot length — providing consistent signal transfer from end to end. Locking Split-Tip Connectors + Pewter Precision Machined Ends Spring-tension locking split-tip connectors resist vibration-induced loosening in the automotive environment. Pewter-finished precision machined metal ends with channel identification markings ensure correct left/right routing and corrosion-resistant contact at both ends. Technical Specs Specification Detail Brand Stinger SKU SI8217 Series 8000 Series Channels 2 Length 17 feet (5 metres) Conductor Oversized Silver-Plated Copper Conductors per Channel 3 (positive, negative, signal drain) Total Conductors 6 Construction Directional High-Rate Double Twisted-Pair Shielding Triple-Braided + Mylar Foil Connector Type Locking Split-Tip RCA Connector Finish Pewter Connector Ends Precision Machined Locking Metal, Channel ID Solder Joints None Strain Relief Moulded Outer Jacket Black Mesh Protective Construction Method C3 Tech Warranty Not confirmed — confirm with Stinger Compatible With / Goes Well With Suitable for: 2-channel amplifier and subwoofer monoblock installations in larger vehicles where the full routing distance from head unit to boot-mounted amplifier exceeds 12 feet SUVs, wagons, vans, and larger utes where additional cable length is needed to clear obstacles in the routing path High-performance amplifier installations where signal cable quality must match the amplifier's capability Pairs well with: Rockford Fosgate, Hertz, Morel, and AudioControl amplifiers Stinger SI82YF and SI82YM 8000 Series Y-adapters for consistent system build across all RCA connections Stinger SI8212 (12ft / 3.7m) for shorter vehicle runs in the same 8000 Series specification Length selection guide: SI826 (6ft / 1.8m) — amplifier in close proximity to head unit. SI8212 (12ft / 3.7m) — standard boot-mounted installation in compact to mid-size vehicles. SI8217 (17ft / 5m) — larger vehicles and longer routing paths. Frequently Asked Questions What is the difference between the SI8217 and the SI8212? Both are identical in specification, construction, and performance — same 8000 Series triple-braided shielding, silver-plated conductors, locking connectors, and C3 Tech. The only difference is length: SI8217 is 17 feet (5m) for larger vehicles, SI8212 is 12 feet (3.7m) for compact to mid-size vehicles. Select based on your vehicle's measured routing distance. What does triple-braided shielding provide that a standard single braid does not? Three independent braided layers cascade over each other — each covering any gaps in the layer beneath — achieving dramatically higher total shield coverage than a single braid. Combined with the inner Mylar foil layer, the shielding system rejects both radiated external interference and conducted internal noise simultaneously. This is particularly important over a 17-foot run. Why does the SI8217 use three conductors per channel rather than two? Standard RCA cables combine the negative signal return and shield drain into one conductor per channel. The SI8217 separates these into dedicated individual conductors, providing a lower-impedance signal return and isolating the shield drain from the audio signal — reducing the noise interaction that occurs in a standard two-conductor design. What is the benefit of locking split-tip connectors over standard push-fit RCA connectors? Standard push-fit RCA connectors rely on friction and can loosen under vibration, causing intermittent noise or signal dropout. The SI8217's locking split-tip connectors mechanically grip the socket with spring tension, providing a vibration-resistant hold that maintains consistent contact force over time in the automotive environment. What does the directional construction mean, and how should I orient the cable? The directional double twisted-pair winding cancels noise most effectively when signal flows from source unit to amplifier. Directional markings on the cable indicate the correct orientation. Installing in reverse does not damage the cable but reduces the effectiveness of the directional noise cancellation — particularly relevant over a longer 17-foot run. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6 Metres. Video Signal. ACC Power. Reverse Trigger. Everything a Reverse Camera Needs. Product Overview The DNA Automotive RVS106F is a 6 metre RCA video extension cable with male RCA plug on one end and female RCA socket on the other and two dedicated power wires running the full length. Unlike the single-wire RVS006F, the RVS106F includes both a red ACC wire for constant or switched power supply and a yellow reversing light wire for the 12V reverse trigger signal. This makes it the more complete solution for reverse camera installations where the camera requires both a power feed and an automatic trigger that activates the camera view when reverse gear is selected. With all three wires video, ACC, and reverse trigger in a single 6 metre cable run, the RVS106F simplifies installation by eliminating the need to run a separate trigger wire from the reversing lights to the headunit or camera controller. Route once, connect all three, and the camera switches on automatically every time reverse is selected. Key Specifications Part Number: RVS106F Brand: DNA Automotive Cable Type: RCA video extension with dual power wires Connector End 1: Male RCA plug Connector End 2: Female RCA socket Red Wire: ACC — constant or switched 12V power supply Yellow Wire: Car reversing light 12V — reverse trigger signal Cable Length: 6 metres Packaging: Blister & Card Cable Gauge (wires): Not specified — confirm with supplier Video Signal Type: Not specified — confirm with supplier Shielding: Not specified — confirm with supplier Features & Benefits Two power wires — ACC and reverse trigger in one run — The RVS106F includes both the red ACC wire (for camera power supply) and the yellow reversing light wire (for the 12V reverse trigger that switches the headunit or display to camera view). Running both wires alongside the video cable means a single 6 metre cable pass handles everything — no separate reverse trigger wire needed. Yellow reverse trigger wire — automatic camera activation — The yellow wire connects to the vehicle's 12V reversing light circuit. When reverse gear is selected and the reversing lights activate, the 12V signal travels back through the yellow wire to the headunit or camera controller, automatically switching the display to reverse camera view. This is how reverse cameras are designed to work — the trigger happens without any driver input. Red ACC wire — camera power supply — The red wire connects to a 12V ACC or constant power source to supply power to the camera. Running it alongside the video and trigger wires keeps all camera wiring in one neat cable run from the rear of the vehicle to the headunit. 6 metre length — standard reverse camera run — Six metres covers most ute, SUV, wagon, and van reverse camera installations from tow bar or tailgate camera mount to the headunit in the cabin. For longer-wheelbase vehicles or caravan tow camera setups, consider the RVS010F (10 metre, single power wire) or confirm whether a 10 metre dual-wire variant is available. Male to female RCA — extend or connect — The male-to-female configuration connects directly between a camera's male RCA output and a headunit's female RCA video input, or extends an existing RCA cable where more length is needed. Technical Specs Specification Detail Part Number RVS106F Brand DNA Automotive Cable Type RCA video extension with dual power wires Connector End 1 Male RCA plug Connector End 2 Female RCA socket Red Wire ACC — 12V power supply Yellow Wire Reversing light — 12V reverse trigger Cable Length 6 metres Wire Gauge Not specified — confirm with supplier Video Signal Not specified — confirm with supplier Shielding Not specified — confirm with supplier Packaging Blister & Card Compatible With / Goes Well With Typical Applications: Reverse camera installation — full cable run (video + power + trigger) Aftermarket reverse camera upgrade on any 12V vehicle Any installation where the camera requires separate ACC power and a 12V reversing light trigger Goes Well With: Reverse cameras with RCA video output and 12V power input Aftermarket headunits with RCA reverse camera input and reverse trigger wire DNA Automotive reverse cameras and driving aid accessories DNA RVS006F (single power wire — for cameras not requiring a separate reverse trigger) Frequently Asked Questions What is the difference between this cable and the RVS006F? The RVS106F includes two power wires — a red ACC wire for camera power and a yellow reversing light trigger wire. The RVS006F includes only a single power wire. Choose the RVS106F when your installation requires both a power feed and an automatic reverse trigger in the same cable run. What does the yellow wire connect to? The yellow wire connects to the 12V reversing light positive circuit in the vehicle. When reverse gear is selected and the reversing lights activate, the 12V signal travels through the yellow wire to the headunit or display, triggering automatic camera view. It carries a trigger signal — not a high-current power supply. What does the red wire connect to? The red wire connects to a 12V ACC or switched power source to supply power to the reverse camera. Connect it to an ACC circuit that is live when the ignition is on, or to a constant 12V source depending on your camera's requirements. Can I use this cable for a front-facing dash camera? This cable is designed for reverse camera installations — the yellow trigger wire is specific to the reversing light circuit. For a front-facing dash camera, a standard RCA extension or dedicated dash cam power cable is more appropriate. Is 6 metres enough for my vehicle? Six metres covers most standard ute, SUV, and wagon reverse camera installations. For longer-wheelbase vehicles, vans, or caravan tow camera setups, a longer cable run may be required. Measure your intended cable route before ordering.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10 Metres of Clean Video Signal RCA Male to Female with Power Wire. Product Overview The DNA Automotive RVS010F is a 10 metre RCA video extension cable with male RCA plug on one end, female RCA socket on the other, and a power wire running the full length. It is the longer sibling of the RVS006F designed for installations where 6 metres is not enough to reach from the camera or video source to the display or headunit. Ten metres covers longer-wheelbase vehicles, larger vans, bus conversions, motorhomes, and caravan-to-tow-vehicle camera runs that exceed the typical 6 metre requirement. As with the RVS006F, the included power wire runs the full cable length, allowing both video signal and camera power to be routed in a single pass through trims, panels, and under carpets keeping the installation tidy and reducing the number of individual cables run through the vehicle. Key Specifications Part Number: RVS010F Brand: DNA Automotive Cable Type: RCA video extension Connector End 1: Male RCA plug Connector End 2: Female RCA socket Includes: Power wire (full length) Cable Length: 10 metres Packaging: Blister & Card Cable Gauge (power wire): Not specified — confirm with supplier Video Signal Type: Not specified — confirm with supplier Shielding: Not specified — confirm with supplier Features & Benefits 10 metre length — for longer vehicle and tow camera runs — Where the 6 metre RVS006F falls short, the RVS010F picks up. Ten metres handles longer-wheelbase utes and vans, motorhomes, bus conversions, and caravan tow camera setups where the camera is mounted on the caravan or trailer and the cable must run back through a tow harness or along the vehicle to a cabin display. Male RCA to female RCA — extend or connect — The male-to-female configuration extends an existing RCA cable or connects directly between a camera's male RCA output and a headunit or monitor's female RCA input. Plug in, route, done. Power wire included — single cable run — The full-length power wire runs alongside the video cable, keeping both signal and camera power in one tidy run through door trims, headliners, and under-carpet routing. Fewer cables, cleaner installation. Purpose-built for rear camera and driving aid installations — The 10 metre length is specifically suited to applications where the camera is further from the display than a standard 6 metre cable can bridge — tow bars on long-wheelbase vehicles, caravan-mounted cameras, and extended cab or body van setups. Technical Specs Specification Detail Part Number RVS010F Brand DNA Automotive Cable Type RCA video extension Connector End 1 Male RCA plug Connector End 2 Female RCA socket Power Wire Included — full 10 metre length Cable Length 10 metres Power Wire Gauge Not specified — confirm with supplier Video Signal Not specified — confirm with supplier Shielding Not specified — confirm with supplier Packaging Blister & Card Compatible With / Goes Well With Typical Applications: Long-run reverse camera video signal extension Caravan and trailer tow camera video cable Motorhome and bus conversion rear camera runs Blind spot and side camera installations on larger vehicles Any 12V AV installation requiring a 10 metre RCA video run Goes Well With: Reverse cameras with RCA video output Aftermarket headunits with RCA video input Rear-view monitors with RCA input DNA RVS006F (6 metre version — for shorter runs) Frequently Asked Questions When should I choose the 10 metre cable over the 6 metre RVS006F? Choose the RVS010F when your camera-to-display run exceeds 6 metres — common in long-wheelbase utes, vans, motorhomes, and caravan tow camera setups where the camera is mounted further from the cabin than a 6 metre cable can reach. Can this cable extend an existing shorter RCA video cable? Yes. Connect the male RCA plug to the female socket of an existing cable and run the female socket end of the RVS010F to your headunit or display, adding 10 metres to the total cable run. Does the power wire run the full 10 metres? Yes — the power wire is included and runs the full 10 metre length, allowing both video signal and camera power to be routed together in a single cable pass through the vehicle. Is this cable suitable for a caravan or trailer tow camera? Yes — the 10 metre length is specifically suited to caravan and trailer camera setups where the camera is mounted at the rear of the trailer and the cable must run back through a connector or along the tow vehicle to reach the cabin display. Confirm the total cable run for your specific setup before ordering. What is the power wire gauge? Power wire gauge is not confirmed in the available product data. Contact us or refer to DNA Automotive's product documentation if wire gauge is a requirement for your installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less