ADR-Approved White Self-Adhesive Retroreflectors 70x30mm, 3M Tape, 100-Pack for Trailer Front Compliance Product Overview The LED Autolamps 7030WB is a bulk pack of 100 white (clear) rectangle retroreflectors with a 3M self-adhesive backing, carrying ADR road approval for use on Australian trailers and vehicles. At 70mm x 30mm x 6mm, the 7030WB shares the same compact low-profile dimensions as the LED Autolamps 7030RB red reflector, making the two a natural pairing for trailer builders who need to address both front white and rear red reflector positions in the one build. White retroreflectors are fitted to the front of trailers, caravans, and heavy vehicles where they provide forward-facing retroreflection for oncoming traffic visibility. The 3M self-adhesive backing allows tool-free installation on clean, flat surfaces no drilling or screw fixings required. Backed by a confirmed 5-year warranty and sold as a 100-unit bulk pack. Features & Benefits ADR road approved — meets Australian Design Rule requirements for retroreflecting devices; suitable for road-legal trailer and vehicle builds in Australia White/clear colour — correct designation for front-facing retroreflectors on trailers and vehicles; pairs with the 7030RB red rear reflectors for a complete front-and-rear reflector solution in the same dimensions 3M self-adhesive backing — weatherproof, high-strength adhesive tape for tool-free installation on clean flat surfaces; no drilling or screw fixings required 70mm x 30mm x 6mm low-profile design — identical footprint to the 7030RB; consistent positioning and appearance when used alongside the red variant on the same trailer build Bulk 100-unit pack — suited to trailer manufacturers, fleet workshops, and body builders fitting reflectors across multiple vehicles 5-year warranty — confirmed warranty coverage on this reflector pack No wiring required — passive retroreflective device; functions without any electrical connection Technical Specs Specification Detail SKU 7030WB Colour White / Clear Shape Rectangle Size per unit 70mm (L) x 30mm (W) x 6mm (H) Adhesive 3M self-adhesive tape Mount type Self-adhesive (no tools required) Compliance ADR road approved Pack quantity 100 units Wiring required No Weight (full pack) 1.2kg Warranty 5 years Compatible With / Goes Well With Trailers, caravans, horse floats, and commercial vehicles requiring ADR-compliant front white retroreflectors Clean, flat surfaces suitable for 3M adhesive bonding (painted steel, aluminium, fibreglass, ABS panels) Pairs directly with LED Autolamps 7030RB red self-adhesive reflectors (same 70x30mm dimensions) for front-and-rear compliance in a single trailer build Trailer manufacturers and fleet operators requiring bulk white reflector stock Weight 1.2kg (full pack of 100 units) Frequently Asked Questions Where on a trailer are white reflectors fitted? White retroreflectors are used on the front of trailers, caravans, and heavy vehicles to provide forward-facing retroreflection for oncoming traffic. Red reflectors go on the rear and amber on the sides — each colour position is designated by ADR compliance requirements. Are these the same size as the 7030RB red reflectors? Yes — both the 7030WB and 7030RB measure 70mm x 30mm x 6mm, making them a matching pair for trailer builds that need both front white and rear red reflector positions covered in the same compact format. Is there a warranty on this product? Yes — the 7030WB carries a confirmed 5-year warranty, consistent across both the features and specification data. What surfaces does the 3M adhesive bond to? The 3M backing is designed for clean, flat surfaces including painted steel, aluminium, fibreglass, and ABS panels. Surface preparation — degreasing and removing dust, wax, or contaminants — is recommended before application for maximum bond strength. Does this require any wiring or electrical connection? No — the 7030WB is a passive retroreflective device. It reflects light from other vehicles back toward the source without any power supply or wiring. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

100 Self-Adhesive Red Rectangle Reflectors in One Pack 3M Tape Backing, Low Profile, Trade Ready Product Overview The LED Autolamps 7030RB is a bulk pack of 100 red rectangle retroreflectors with a self-adhesive 3M tape backing, designed for trailer builders, fleet operators, body builders, and trades needing a reliable stock of reflectors at scale. Each reflector measures 70mm x 30mm x 6mm a compact, low-profile unit that sits flush against trailer panelling, caravan sidewalls, toolboxes, and vehicle bodies without snagging on cargo or catching on surroundings. The 3M adhesive backing provides a strong, weatherproof bond to clean, flat surfaces, eliminating the need for drilling or screw fixings. Being passive retroreflective devices, no wiring or electrical connection is required peel, press, and the reflector is in service. Features & Benefits 100-unit bulk pack — suited to trailer manufacturers, fleet workshops, vehicle body builders, and trades fitting out multiple trailers or vehicles in one job Self-adhesive 3M tape backing — strong, weatherproof bond to clean flat surfaces; no drilling or screw fixings required, significantly faster to apply than mechanical-mount reflectors 70mm x 30mm x 6mm low profile — slim 6mm height minimises snag risk on cargo straps, tarps, and load restraints; compact rectangle shape fits standard side and rear reflector positions Red colour — correct designation for rear-facing reflectors on trailers and vehicles; complements rear tail and stop lamp assemblies No wiring required — passive retroreflective device; no electrical connection, no circuit load, no installation complexity beyond surface prep and adhesion Premium quality construction — LED Autolamps' standard build quality applied to a high-volume consumable product Technical Specs Specification Detail SKU 7030RB Colour Red Shape Rectangle Size per unit 70mm (L) x 30mm (W) x 6mm (H) Adhesive 3M self-adhesive tape Mount type Self-adhesive (no tools required) Pack quantity 100 units Wiring required No Weight (full pack) 1.26kg Warranty Unconfirmed — see note above Compatible With / Goes Well With Trailers, caravans, horse floats, and vehicle bodies requiring rear or side red reflectors Clean, flat surfaces suitable for 3M adhesive bonding (metal, fibreglass, ABS panels) Trailer manufacturers and fleet operators requiring bulk reflector stock Pairs with LED Autolamps trailer lamp and wiring harness range for complete trailer lighting builds Weight 1.26kg (full pack of 100 units) Frequently Asked Questions How many reflectors are in the pack? 100 units per pack. Each reflector measures 70mm x 30mm x 6mm and comes with a 3M self-adhesive backing pre-applied. How strong is the 3M adhesive backing? 3M tape provides a strong, weatherproof bond to clean, dry, flat surfaces. Surface preparation — degreasing and removing dust or wax — is recommended before application for maximum adhesion. Do I need to drill or use screws to fit these? No — the 3M self-adhesive backing makes installation tool-free. Peel the liner, press firmly onto a clean surface, and allow the adhesive to cure for best results. Is there a warranty on this product? There is a conflict in the supplier data — the features section lists a 5-year warranty while the specification field states no warranty. Confirm with LED Autolamps or contact F.A.E. before purchasing if warranty coverage is important to your buying decision. What surface types does the adhesive bond to? The 3M backing is designed for clean, flat surfaces such as painted steel, aluminium, fibreglass, and ABS panels common on trailers and vehicle bodies. Textured, curved, or contaminated surfaces may reduce bond strength. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR-Approved Amber Self-Adhesive Reflectors 3M Tape, Low Profile, Twin Pack. Product Overview The LED Autolamps 7030A is a twin pack of amber self-adhesive rectangular reflectors designed for trailers, caravans, trucks, and other vehicles requiring ADR-compliant amber reflective identification. Each reflector measures 70mm x 30mm x 6mm a low-profile design that fits neatly on trailer frames, side rails, and body panels where a compact, clean amber reflector solution is required. Backed by high-quality 3M adhesive tape, these reflectors install quickly and securely without drilling or fasteners simply clean the mounting surface and press firmly into place. Fully compliant with ADR 47/00, the 7030A meets Australian legal requirements for amber reflectors on road vehicles and trailers. The 5-year warranty reflects LED Autolamps' confidence in the durability and adhesion performance of this product in Australian road conditions. The amber 7030A is the direct companion to the red 7030R both share the same form factor and mounting system for a consistent, matched reflector installation across a vehicle. Key Specifications Colour: Amber Shape: Rectangle Dimensions: 70mm x 30mm x 6mm Mount: Self-adhesive (high-quality 3M tape) Pack quantity: 2 (twin pack) Compliance: ADR 47/00 Warranty: 5 years Housing colour: White Weight: Not specified by supplier Packaging: Blister pack Brand: LED Autolamps SKU: 7030A Features & Benefits ADR 47/00 approved: Compliant with Australian Design Rules (ADR 47/00) for legal use as an amber reflector on Australian road vehicles and trailers High-quality 3M adhesive tape: Premium 3M tape provides secure, long-lasting adhesion to trailer frames, body panels, and side rails without drilling or additional hardware Low profile design: At just 6mm deep, the 7030A sits flush and unobtrusive on the mounting surface, maintaining a clean appearance on trailer and vehicle bodywork Twin pack: Two amber reflectors per pack, providing coverage for both sides of a trailer or vehicle in a single purchase Amber colour: Purpose-built for amber reflector applications on trailer sides and forward-facing positions where amber ADR compliance is required Companion to the 7030R: Shares the same 70mm x 30mm x 6mm form factor and 3M mounting system as the red 7030R rear reflector for a consistent, matched reflector installation across the vehicle 5-year warranty: LED Autolamps' 5-year warranty covers this product against manufacturing defects and adhesion failure Technical Specs Specification Detail SKU 7030A Brand LED Autolamps Type Reflector Colour Amber Shape Rectangle Dimensions 70mm x 30mm x 6mm Mount Self-adhesive (3M tape) Pack Quantity 2 (twin pack) Compliance ADR 47/00 Warranty 5 Years Housing Colour White Packaging Blister pack Compatible With Universal suits all trailers, caravans, and vehicles requiring ADR-compliant amber reflectors including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Trucks and commercial vehicles Agricultural and construction trailers Any vehicle requiring ADR 47/00 compliant amber side or front reflectors Pairs well with: LED Autolamps combination lamps and trailer lighting range LED Autolamps MAXILAMPC3XR stop/tail/indicator combination lamp LED Autolamps 35CARM red/amber side marker LED Autolamps 80BSTIM stop/tail/indicator lamp Frequently Asked Questions How many reflectors are included in this pack? This blister pack contains two amber reflectors sufficient for both left and right side fitment on a single trailer or vehicle in a standard amber reflector application. Is this reflector ADR approved for Australian road use? Yes the 7030A is compliant with ADR 47/00, meeting Australian legal requirements for amber reflectors on trailers and road vehicles. What is the difference between the 7030A and the 7030R? The 7030A is amber and the 7030R is red both share the same 70mm x 30mm x 6mm form factor, 3M adhesive mounting, and ADR 47/00 compliance. The amber 7030A is used for side and front reflector applications, while the red 7030R is used for rear reflector positions. Does this reflector require drilling or hardware for mounting? No the 7030A uses high-quality 3M self-adhesive tape for mounting. Simply clean the surface, remove the adhesive backing, and press firmly into place. No drilling or fasteners are required. What surface preparation is needed before applying the reflector? The mounting surface should be clean, dry, and free of grease, wax, or contamination before applying the adhesive. Wiping with an isopropyl alcohol wipe before application will maximise adhesion strength and longevity. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less