15" 2-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals. Product Overview The Rockford Fosgate Punch P1S2-15 is a 15" 2-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the largest format in the Punch P1 subwoofer range. The 15" cone moves significantly more air than the 10" and 12" P1 models, producing greater bass output and lower frequency extension in comparable enclosures suited to high-output builds and installations where maximum bass presence is the priority. All confirmed Punch P1 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, 10-AWG nickel-plated push terminals, rubberized ABS trim ring with grille insert provision, and protective PVC textured magnet cover. Optimised for sealed and vented enclosures. Sold as an individual unit. Key Specifications Subwoofer size: 15 inch Voice coil configuration: Single Voice Coil (SVC) Impedance: 2-Ohm Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: 10-AWG nickel-plated push terminals Trim ring: Rubberized ABS (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 15" Cone — Maximum Air Movement in the P1 Range — The 15" cone moves the most air of any driver in the Punch P1 lineup — producing the greatest bass output and lowest frequency extension. A 15" subwoofer requires a substantially larger enclosure than a 10" or 12" driver — confirm enclosure dimensions and available installation space before purchasing. 250W RMS — Confirmed 250W RMS sustained power handling. Kevlar Fibre-Reinforced Paper Cone — Kevlar aramid fibres reinforce the paper cone for improved stiffness and breakup resistance, with paper's natural damping characteristics. VAST — Up to 25% increased effective cone area at the same basket diameter. Nomex® Voice Coil Reinforcement Collar — Spun-laced Nomex reinforcement at the voice coil-to-cone junction for thermal and mechanical durability. Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased Xmax; vented backplate eliminates air spring compression. 10-AWG Nickel-Plated Push Terminals — Heavier gauge for lower contact resistance at 250W. StampCast Basket with Integrated Spider Venting — Motor cooling during sustained operation. Rubberized ABS Trim Ring / Grille Provision / PVC Magnet Cover — Clean installation finish with optional grille. Sealed and Vented Compatible — Both enclosure types confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1S2-15 Series Punch P1 Subwoofer Size 15 inch Voice Coil Single Voice Coil (SVC) Impedance 2-Ohm ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Surround Technique VAST (up to 25% increased cone area) ✓ Sensitivity Not specified Frequency Response Not specified Xmax Not specified Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals 10-AWG Nickel-Plated Push Terminals ✓ Trim Ring Rubberized ABS (Grille Insert Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency at tuning frequency Wiring: 2-Ohm SVC — single 2-Ohm load per unit Two units in parallel = 1-Ohm; two in series = 4-Ohm Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 2-Ohm Frequently Asked Questions Why choose a 15" subwoofer over a 12"? A 15" cone moves substantially more air per stroke than a 12" driver — producing more bass output and lower frequency extension in a matched enclosure. The trade-off is that a 15" enclosure requires significantly more internal volume and physical space, and the driver itself is heavier. A 15" installation suits builds where boot space, dedicated subwoofer enclosures, or vans and trucks provide the required room. What enclosure volume is required for the P1S2-15? Enclosure volumes for sealed and vented configurations are not confirmed in the supplier data. A 15" driver requires considerably more net internal volume than 10" or 12" drivers — confirm the Rockford Fosgate recommended volumes from the official P1S2-15 datasheet before building or selecting an enclosure. What amplifier power is appropriate? 250W RMS at 2-Ohm. Confirm the amplifier's RMS output at 2-Ohm before purchasing. Is a grille available? The rubberized ABS trim ring accommodates an optional grille insert. Confirm the compatible grille part number with Rockford Fosgate. What is VAST and how does it benefit the 15" cone? VAST (Vertical Attach Surround Technique) attaches the surround vertically at the cone edge — increasing the effective radiating area by up to 25% compared to a conventional surround attachment at the same basket diameter. For a 15" driver, this translates to meaningfully more air movement and output than would otherwise be available at the same physical footprint. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12" 2-Ohm SVC Punch Subwoofer 250W RMS, Kevlar Fibre-Reinforced Paper Cone, VAST, Nomex® Voice Coil Collar, Extended Pole Piece, 10-AWG Nickel Push Terminals. Product Overview The Rockford Fosgate Punch P1S2-12 is a 12" 2-Ohm Single Voice Coil (SVC) subwoofer rated at 250W RMS the 12" 2-Ohm variant of the Punch P1 platform. The 12" cone moves more air than the 10" P1 models for greater bass output and lower frequency extension in the same sealed or vented enclosure configuration. All Punch P1 construction elements are confirmed: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, 10-AWG nickel-plated push terminals, rubberized ABS trim ring with grille insert provision, and protective PVC textured magnet cover. Optimised for sealed and vented enclosures. Sold as an individual unit. Key Specifications Subwoofer size: 12 inch Voice coil configuration: Single Voice Coil (SVC) Impedance: 2-Ohm Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: 10-AWG nickel-plated push terminals Trim ring: Rubberized ABS (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 12" Cone — Greater Air Movement — The 12" Kevlar fibre-reinforced cone moves more air per stroke than the 10" P1 models — producing more bass output and generally lower frequency extension in equivalent enclosures. 250W RMS — Confirmed 250W RMS sustained power handling. Kevlar Fibre-Reinforced Paper Cone — Kevlar aramid fibres reinforce the paper matrix for improved stiffness and breakup resistance at high output levels, while maintaining paper's natural damping and low mass. VAST — Up to 25% increased effective cone area for improved efficiency and output. Nomex® Voice Coil Reinforcement Collar — Spun-laced Nomex at the voice coil-to-cone junction — heat and mechanical reinforcement at the highest-stress point of the moving assembly. Extended Pole Piece and Bumped Vented Backplate — Extended pole for increased linear excursion (Xmax); vented backplate to eliminate air spring compression at high excursion. 10-AWG Nickel-Plated Push Terminals — Heavier gauge connection than the 12-AWG terminals on Prime R-series. StampCast Basket with Integrated Spider Venting — Motor cooling during sustained operation. Rubberized ABS Trim Ring / Grille Provision / PVC Magnet Cover — Completed installation finish with optional grille provision. Sealed and Vented Compatible — Both enclosure types confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1S2-12 Series Punch P1 Subwoofer Size 12 inch Voice Coil Single Voice Coil (SVC) Impedance 2-Ohm ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Surround Technique VAST (up to 25% increased cone area) ✓ Sensitivity Not specified Frequency Response Not specified Xmax Not specified Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals 10-AWG Nickel-Plated Push Terminals ✓ Trim Ring Rubberized ABS (Grille Insert Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency at tuning frequency Wiring: 2-Ohm SVC — single 2-Ohm load per unit Two units in parallel = 1-Ohm (confirm amplifier stability before use); two units in series = 4-Ohm Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers at 2-Ohm Frequently Asked Questions How does the P1S2-12 differ from the P1S2-10? Both are identical Punch P1 subwoofers with the same 250W RMS rating, construction, and 2-Ohm SVC impedance. The difference is size: the 12" cone moves more air and typically produces more bass output and lower frequency extension than the 10" in a matched enclosure. The 12" requires a larger enclosure with greater net internal volume. What enclosure volume is recommended? Enclosure volumes for sealed and vented configurations are not confirmed in the supplier data. Pull the official Rockford Fosgate P1S2-12 datasheet for recommended net internal volumes. What amplifier power is appropriate? 250W RMS at 2-Ohm. Confirm the amplifier's RMS output at 2-Ohm before purchasing. Is a grille available for the P1S2-12? The rubberized ABS trim ring accommodates an optional grille insert. Confirm the compatible grille part number with Rockford Fosgate. What does "Kevlar fibre-reinforced" mean for bass performance? Kevlar aramid fibres are blended into the paper cone, significantly increasing its tensile strength and stiffness. This resists cone breakup — the deformation that causes distortion at high output levels — while keeping the cone mass low. The result is accurate bass impact at the power levels a 250W subwoofer encounters. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

15" Punch P1 Stamped Steel Grille Insert Black. Fits Gen-3 P1 Trim Rings Only. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P1G-15 is a 15" stamped steel mesh grille insert in black designed for Gen-3 Punch P1 standard-depth 15" subwoofers. The grille inserts into the trim ring already fitted to the subwoofer no additional hardware required. The trim ring (included with the P1 subwoofer) holds the grille securely in position. The P1G grille range is specific to Punch P1 subwoofers and uses Gen-3 P1 trim ring dimensions distinct from the P2P3G range (P2 and P3 compatible) and the P3SG range (P3S shallow compatible). Confirm your subwoofer is a Gen-3 Punch P1 before purchasing. Key Specifications Part number: P1G-15 Compatible size: 15 inch (standard depth) ✓ Compatible series: Punch P1 only ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-3 P1 trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-3 P1 only ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-3 P1 15" models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits Punch P1 15" Platform — P1 Specific Trim Ring The P1G range uses P1-specific trim ring dimensions — different from the P2P3G range. The P1G-15 will only fit Gen-3 P1 15" subwoofers. Do not attempt to use a P2P3G-15 as a substitute. Stamped Steel Mesh — Physical Cone and Surround Protection 15" subwoofers in boot installations require significant enclosure and cargo space — the rigid steel mesh shields the Kevlar fibre-reinforced paper P1 cone and butyl rubber surround from physical contact with adjacent cargo in large boot environments. Trim Ring Insertion — Tool-Free Install Remove the trim ring from the subwoofer, insert the grille, re-secure the trim ring. No tools required. Fully reversible. Gen-3 Specific Sizing Sized for Gen-3 P1 trim rings only. Not compatible with earlier-generation trim rings, P2/P3 trim rings, or the P3S shallow series. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1G-15 Series Punch P1 (Standard) Gen-3 Compatible Size 15 inch ✓ Compatible Series Punch P1 only ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-3 P1 trim rings ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-3 P1 only ✓ Compatible SKUs Select Gen-3 P1 15" models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-3 Punch P1 15" standard-depth subwoofers — confirm specific SKUs with Rockford Fosgate Likely compatible (confirm before purchasing): Rockford Fosgate P1S2-15 Punch P1 15" 2-Ohm SVC Subwoofer Rockford Fosgate P1S4-15 Punch P1 15" 4-Ohm SVC Subwoofer Frequently Asked Questions Does the trim ring come with the P1G-15? No — the grille inserts into the trim ring already supplied with the Punch P1 15" subwoofer. The P1G-15 is the grille insert only. Can I use the P2P3G-15 on a P1 15" subwoofer instead? No — the P1G-15 and P2P3G-15 use different trim ring dimensions corresponding to their respective subwoofer series. The P1G-15 fits Gen-3 P1 trim rings; the P2P3G-15 fits Gen-3 P2 and P3 trim rings. These are not interchangeable. Will this grille fit earlier-generation P1 subwoofers? The P1G-15 is sized for Gen-3 P1 trim rings specifically. Confirm the generation of your P1 subwoofer with Rockford Fosgate before purchasing. Is the P1G-15 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate P1G-15 product page before ordering. Are grille inserts available for smaller P1 subwoofers? Equivalent P1 grille SKUs for 10" and 12" Punch P1 models may be available — confirm the full P1G range with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12" Punch P1 Stamped Steel Grille Insert Black. Fits Gen-3 P1 Trim Rings Only. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P1G-12 is a 12" stamped steel mesh grille insert in black designed for Gen-3 Punch P1 standard-depth 12" subwoofers. The grille inserts into the trim ring already fitted to the subwoofer no additional hardware required. The trim ring (included with the P1 subwoofer) holds the grille securely in position. The P1G range is P1-specific uses Gen-3 P1 trim ring dimensions distinct from the P2P3G (P2/P3) and P3SG (P3S shallow) ranges. Confirm your subwoofer is a Gen-3 Punch P1 12" before purchasing. Key Specifications Part number: P1G-12 Compatible size: 12 inch (standard depth) ✓ Compatible series: Punch P1 only ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-3 P1 trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-3 P1 only ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-3 P1 12" models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits P1-Specific Trim Ring Fit The P1G-12 uses Gen-3 P1 trim ring dimensions — not interchangeable with the P2P3G-12 (Gen-3 P2/P3) or the P3SG-12 (shallow P3S). Match the grille to the correct subwoofer series. Stamped Steel Mesh — Physical Protection The rigid mesh shields the 12" Kevlar fibre-reinforced paper P1 cone and butyl rubber surround from physical contact with boot cargo in everyday and active-use installations. Trim Ring Insertion — Tool-Free Install Remove the trim ring, insert the grille, re-secure. No tools required. Fully reversible. Gen-3 Specific Sizing Sized for Gen-3 P1 trim rings only — not compatible with earlier-generation P1 trim rings. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1G-12 Series Punch P1 (Standard) Gen-3 Compatible Size 12 inch ✓ Compatible Series Punch P1 only ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-3 P1 trim rings ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-3 P1 only ✓ Compatible SKUs Select Gen-3 P1 12" models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-3 Punch P1 12" standard-depth subwoofers — confirm specific SKUs with Rockford Fosgate Likely compatible (confirm before purchasing): Rockford Fosgate P1S2-12 Punch P1 12" 2-Ohm SVC Subwoofer Rockford Fosgate P1S4-12 Punch P1 12" 4-Ohm SVC Subwoofer Frequently Asked Questions Does the trim ring come with the P1G-12? No — the grille inserts into the trim ring already supplied with the Punch P1 12" subwoofer. The P1G-12 is the grille insert only. Can I use the P2P3G-12 on a P1 12" subwoofer? No — the P1G-12 and P2P3G-12 use different trim ring dimensions corresponding to their respective subwoofer series. These are not interchangeable. Will this grille fit earlier-generation P1 subwoofers? The P1G-12 is sized for Gen-3 P1 trim rings only. Confirm the generation of your P1 subwoofer with Rockford Fosgate before purchasing. Is the P1G-12 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate P1G-12 product page before ordering. Are P1 grille inserts available in other sizes? Yes — the P1G-10 and P1G-15 cover the 10" and 15" Punch P1 platforms respectively. All use Gen-3 P1 trim ring dimensions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" Punch P1 Stamped Steel Grille Insert Black. Fits Gen-3 P1 Trim Rings Only. Protects Against Cone and Surround Damage. Product Overview The Rockford Fosgate P1G-10 is a 10" stamped steel mesh grille insert in black designed for Gen-3 Punch P1 standard-depth 10" subwoofers. The grille inserts into the trim ring already fitted to the subwoofer no additional hardware required. The trim ring (included with the P1 subwoofer) holds the grille securely in position. The P1G range is P1-specific uses Gen-3 P1 trim ring dimensions distinct from the P2P3G (P2/P3) and P3SG (P3S shallow) grille ranges. Confirm your subwoofer is a Gen-3 Punch P1 10" before purchasing. The P1G-10 completes the P1G grille range alongside the P1G-12 and P1G-15. Key Specifications Part number: P1G-10 Compatible size: 10 inch (standard depth) ✓ Compatible series: Punch P1 only ✓ Grille type: Stamped mesh insert ✓ Material: Stamped steel ✓ Colour: Black ✓ Fitment: Inserts into Gen-3 P1 trim rings ✓ Trim ring required: Yes — trim ring supplied with subwoofer ✓ Generation compatibility: Gen-3 P1 only ✓ Protection: Surround and cone damage ✓ Compatible SKUs: Select Gen-3 P1 10" models — confirm with Rockford Fosgate Pack quantity: Not confirmed — confirm with Rockford Fosgate Dimensions: Not confirmed — confirm with Rockford Fosgate Weight: Not confirmed Warranty: Not confirmed — confirm with Rockford Fosgate Features & Benefits P1-Specific Trim Ring Fit The P1G-10 uses Gen-3 P1 trim ring dimensions — not interchangeable with the P2P3G-10 (Gen-3 P2/P3) or the P3SG-10 (Gen-2 P3S shallow). Three separate grille ranges serve three separate subwoofer platforms at the 10" size. Stamped Steel Mesh — Physical Protection The rigid mesh shields the 10" Kevlar fibre-reinforced paper P1 cone and butyl rubber surround from physical contact with boot cargo. Trim Ring Insertion — Tool-Free Install Remove the trim ring, insert the grille, re-secure. No tools required. Fully reversible. Gen-3 Specific Sizing Sized for Gen-3 P1 trim rings only — not compatible with earlier-generation P1 trim rings. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P1G-10 Series Punch P1 (Standard) Gen-3 Compatible Size 10 inch ✓ Compatible Series Punch P1 only ✓ Grille Type Stamped Mesh Insert ✓ Material Stamped Steel ✓ Colour Black ✓ Fitment Inserts into Gen-3 P1 trim rings ✓ Trim Ring Required Yes (supplied with subwoofer) ✓ Generation Gen-3 P1 only ✓ Compatible SKUs Select Gen-3 P1 10" models (confirm with Rockford Fosgate) Pack Quantity Not confirmed Dimensions Not confirmed Weight Not confirmed Warranty Not confirmed Compatible With / Goes Well With Confirmed compatible platform: Gen-3 Punch P1 10" standard-depth subwoofers — confirm specific SKUs with Rockford Fosgate Likely compatible (confirm before purchasing): Rockford Fosgate P1S2-10 Punch P1 10" 2-Ohm SVC Subwoofer Rockford Fosgate P1S4-10 Punch P1 10" 4-Ohm SVC Subwoofer Frequently Asked Questions Does the trim ring come with the P1G-10? No — the grille inserts into the trim ring already supplied with the Punch P1 10" subwoofer. The P1G-10 is the grille insert only. What is the difference between the P1G-10, P2P3G-10, and P3SG-10? All three are 10" subwoofer grille inserts but for different platforms. P1G-10 fits Gen-3 Punch P1 trim rings; P2P3G-10 fits Gen-3 Punch P2 and P3 trim rings; P3SG-10 fits Gen-2 Punch P3S shallow trim rings. Select the grille that matches your subwoofer series. Can I use the P2P3G-10 on a P1 10" subwoofer? No — the P1G-10 and P2P3G-10 use different trim ring dimensions. These are not interchangeable. Is the P1G-10 sold as a single unit or a pair? Pack quantity is not confirmed. Confirm from the official Rockford Fosgate P1G-10 product page before ordering. What other sizes are available in the P1G range? The P1G range covers P1G-10 (10"), P1G-12 (12"), and P1G-15 (15") — all for Gen-3 Punch P1 standard-depth subwoofers. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6.5" 2-Way Euro Fit Component System FlexFit2 Basket, External Crossover, Stamp-Cast Aluminium Frame, VAST Santoprene Surround, DDC Tweeter Mount. Product Overview The Rockford Fosgate Punch P165-SE is a 6.5" 2-way component speaker system specifically engineered for compatibility with European and import vehicles alongside North American platforms featuring the FlexFit2 basket designed to fit VW, Citroën, Vauxhall, and a wide range of other European OEM mounting profiles. It is a meaningfully higher-specification product than the standard Punch component systems (P152-S, P16-S), introducing several premium construction elements not found in the rest of the Punch component range. Key construction upgrades include a stamp-cast aluminium frame (vs stamped steel on the P152-S and P16-S), VAST (Vertical Attach Surround Technique) surround geometry, Santoprene thermoplastic elastomer surround (vs butyl rubber), linear high-excursion motor design, and an external crossover for more precise frequency cutoff replacing the ICC (Integrated Concealed Crossover) used in the standard Punch component models. The DDC (Discrete Dual Clamp) tweeter mounting system provides flush and surface (angled) installation options. Grilles and mounting hardware are confirmed included. Technical specifications power handling, impedance, sensitivity, frequency response, mounting depth, and crossover point are not provided in the supplier data and must be pulled from the official Rockford Fosgate P165-SE datasheet before publishing. Key Specifications Woofer size: 6.5 inch Configuration: 2-way component (separate woofer + tweeter) Power handling (RMS): Not specified — confirm with Rockford Fosgate Impedance: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Woofer mounting depth: Not specified — confirm with Rockford Fosgate Tweeter: 1" treated PEI dome Tweeter mounting: DDC (Discrete Dual Clamp) — flush and surface (angled) options Crossover: External (separate unit, included) Crossover point: Not specified — confirm with Rockford Fosgate Cone: Injection-moulded mineral-filled polypropylene Surround: Santoprene (thermoplastic elastomer) Surround technique: VAST (Vertical Attach Surround Technique) Frame: Stamp-cast aluminium Basket: FlexFit2 (European vehicle compatible) Grilles: Included Mounting hardware: Included Kit contents: 2 woofers + 2 tweeters + external crossovers + grilles + hardware CEA-2031 compliant: Not stated — confirm with Rockford Fosgate Weight: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits FlexFit2 Basket — Euro Fit Compatible — The second-generation FlexFit basket is specifically engineered to accommodate the OEM speaker mounting profiles found in VW, Citroën, Vauxhall, and a broad range of other European and import vehicles that standard round baskets do not fit. This is the defining reason to choose the P165-SE over the standard P16-S (6") when the target vehicle is European or import. Stamp-Cast Aluminium Frame — An aluminium frame is stiffer and lower in mass than the stamped steel baskets used in the standard Punch component systems — reducing frame resonance that can colour the speaker's output. This is a premium construction element typically reserved for higher-specification speaker designs. VAST — Vertical Attach Surround Technique — Rockford Fosgate's proprietary surround attachment geometry. VAST positions the surround vertically at the cone edge rather than the conventional angled attachment — increasing the effective radiating area of the cone for a given driver diameter, and improving the linearity of cone movement at the surround interface. Santoprene Rubber Surround — Santoprene is a thermoplastic vulcanizate (TPV) elastomer with excellent UV resistance, temperature stability, and flexural fatigue performance. It provides similar long-term durability characteristics to butyl rubber used in other Punch series speakers — appropriate for Australian vehicle conditions. External Crossover — Precision Frequency Cutoff — Unlike the ICC design used in the P152-S and P16-S, the P165-SE uses a separate external crossover unit included in the kit. The external design allows more complex crossover circuitry — enabling more precise frequency division, steeper slopes, and better component matching than a crossover integrated into the tweeter assembly. A mounting location for the crossover unit must be allocated during installation. Linear High-Excursion Motor Design — The woofer motor magnetics and suspension are designed for high linear excursion — maintaining controlled, low-distortion cone movement across a wider excursion range than a standard motor design. This contributes to lower distortion at higher output levels. 1" Treated PEI Dome Tweeter — The 1" PEI dome tweeter is treated (surface coating or coating process not specified — confirm with Rockford Fosgate) for improved high-frequency performance. The "treated" designation typically implies a coating applied to the dome to adjust its frequency response or damping characteristics. DDC Tweeter Mounting System — Discrete Dual Clamp provides flush and angled surface mounting hardware — offering two installation positions for optimal tweeter directional alignment without the 1-3/4" recessed drilling option of the P152-S. Grilles and Mounting Hardware Included — Complete kit for a finished installation in European and import vehicle positions. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P165-SE Series Punch Woofer Size 6.5 inch Configuration 2-Way Component Power Handling (RMS) Not specified — confirm with Rockford Fosgate Impedance Not specified — confirm with Rockford Fosgate Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Woofer Mounting Depth Not specified — confirm with Rockford Fosgate Tweeter 1" Treated PEI Dome Tweeter Mounting DDC (flush and surface/angled) Crossover External (separate, included in kit) Crossover Point Not specified — confirm with Rockford Fosgate Cone Injection-Moulded Mineral-Filled Polypropylene Surround Santoprene (TPV elastomer) Surround Technique VAST (Vertical Attach Surround Technique) Frame Stamp-Cast Aluminium Basket FlexFit2 (Euro Fit) Grilles Included ✓ Mounting Hardware Included ✓ Kit Contents 2 woofers + 2 tweeters + external crossovers + grilles + hardware CEA-2031 Compliant Not confirmed Cutout Diameter Not specified — confirm with Rockford Fosgate Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Designed for: European and import vehicles with non-standard OEM speaker mounting profiles (FlexFit2) VW, Citroën, Vauxhall, and compatible models Standard North American and Australian vehicle 6.5" positions also supported Punch component system comparison: Feature P152-S (5.25") P16-S (6") P165-SE (6.5") Frame Steel Steel Aluminium ✓ Surround Butyl Rubber Butyl Rubber Santoprene Surround Tech Standard Standard VAST Crossover ICC ICC External Euro Fit No No Yes (FlexFit2) Grilles Yes ✓ Yes ✓ Yes ✓ RMS 50W ✓ 60W ✓ TBC Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer system for bass below the P165-SE's confirmed lower frequency limit (TBC) Frequently Asked Questions What makes the P165-SE "Euro Fit" compatible? The FlexFit2 basket is designed to accommodate the OEM speaker mounting geometries used in VW, Citroën, Vauxhall, and other European and import vehicles — where standard round baskets do not physically fit the factory mounting locations without modification. Always confirm specific vehicle compatibility with the Rockford Fosgate fit guide before purchasing. What is VAST and how does it benefit the speaker? VAST (Vertical Attach Surround Technique) is Rockford Fosgate's proprietary surround attachment geometry. By attaching the surround vertically rather than at the conventional angle, VAST increases the effective radiating area of the cone for a given driver diameter — improving efficiency and bass output relative to the cone's physical size. What is the difference between the external crossover in the P165-SE and the ICC in the P152-S and P16-S? The ICC (Integrated Concealed Crossover) is built into the tweeter assembly — no separate mounting is required. The P165-SE's external crossover is a separate physical unit that must be mounted inside the door or another accessible location during installation. The external design allows more complex crossover circuitry — providing more precise frequency division than an integrated unit, but requiring an additional installation step. What is Santoprene and how does it compare to butyl rubber? Santoprene is a thermoplastic vulcanizate (TPV) elastomer — a synthetic rubber compound with excellent UV resistance, temperature stability, and long-term flexural fatigue performance. These durability characteristics are comparable to butyl rubber (used in the P152-S and P16-S), making the Santoprene surround appropriate for Australian vehicle conditions. What technical specifications are confirmed for the P165-SE? Kit contents (2 woofers + 2 tweeters + external crossovers + grilles + hardware), 1" treated PEI dome tweeter, FlexFit2 basket, external crossover, aluminium frame, VAST surround technique, and DDC tweeter mounting are all confirmed. Power handling, impedance, sensitivity, frequency response, and mounting depth must be pulled from the official Rockford Fosgate P165-SE datasheet before publishing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

6" Shallow 2-Way Coaxial 55W RMS, 88dB, 65Hz–22kHz, CEA-2031. FlexFit Basket with 5"×7" and 6"×9" Adapter Plates Included. Product Overview The Rockford Fosgate Punch P16 is a pair of 6" 2-way shallow full-range coaxial speakers rated at 55W RMS (110W peak) the standout model in the Punch series coaxial range. The shallow design keeps the 48mm (1.89") mounting depth appropriate for door and panel locations where standard-depth 6" speakers would not fit without modification. Specifications confirmed by Rockford Fosgate include 4Ω impedance, 88dB sensitivity at 1W/1M, 65Hz to 22kHz frequency response, and CEA-2031 compliant power handling the most complete data set in the Punch series speaker range in this catalogue. The 0.75" (19mm) PEI dome tweeter is the largest confirmed tweeter in the Punch series coaxial range larger than the 0.5" (12.7mm) tweeter in the P132. Adapter plates for both 5"×7" and 6"×9" oval positions are included alongside standard mounting hardware and grilles, extending the P16's fitment range across three speaker position formats. CEA-2031 compliance confirms the 55W RMS figure is measured to industry standards. Key Specifications Speaker size: 6 inch (shallow design) Configuration: 2-way coaxial Power handling (RMS): 55W per speaker (CEA-2031 compliant) Power handling (peak): 110W per speaker Impedance: 4Ω Sensitivity: 88dB @ 1W/1M Frequency response: 65Hz – 22kHz Mounting depth: 1.89" (48mm) Tweeter: PEI dome, 0.75" (19.0mm) Crossover: Built-in tweeter crossover (ICC) Cone: Injection-moulded mineral-filled polypropylene Surround: Butyl rubber Basket: FlexFit OEM adapter plates: 5"×7" and 6"×9" pair (both included) Mounting hardware: Included Grilles: Included ✓ Sold as: Pair (2 speakers) CEA-2031 compliant: Yes Shipping weight: 5.8 lbs (2.63 kg) per pair Cutout diameter: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Shallow Design — 48mm Mounting Depth — The P16's shallow construction keeps the 6" driver within a 48mm (1.89") mounting depth — enabling installation in door panels and cavities where standard-depth 6" or 6.5" speakers cannot be fitted without cutting or modification. This is the defining installation advantage of the P16 over standard-depth 6" or 6.5" coaxial alternatives. 65Hz – 22kHz Frequency Response — Broadest in the Punch Series — At 65Hz, the P16 extends significantly lower than the P132 (120Hz) and P142 (100Hz) — approaching usable bass reproduction from the 6" cone without a subwoofer in more listening environments. The 22kHz upper limit confirms extended high-frequency coverage from the 0.75" PEI tweeter. 55W RMS CEA-2031 — Highest RMS in the Punch Series — The P16's 55W RMS is the strongest confirmed power rating in the Punch series range. CEA-2031 compliance confirms the rating is measured under industry standard sustained conditions. 88dB Sensitivity — Best in the Punch Series — At 88dB, the P16 is 3dB more sensitive than the P132 (85dB) and 1.5dB above the P142 (86.5dB). In practical terms, 3dB more sensitivity produces twice the sound pressure from the same power input — a meaningful efficiency gain from a head unit or low-powered amplifier. 0.75" PEI Dome Tweeter — Largest in the Punch Coaxial Series — The 0.75" (19mm) PEI dome is the largest confirmed tweeter across the Punch series coaxials in this catalogue — providing better high-frequency dispersion and a fuller treble presentation than the 0.5" tweeter in the P132. 5"×7" and 6"×9" Adapter Plates Included — Both a 5"×7" and 6"×9" oval adapter plate pair are included alongside standard mounting hardware — extending the P16's fitment range to accommodate oval speaker positions common in Ford, Mazda, and other vehicles, from a single kit. FlexFit Basket with ICC — Non-standard basket geometry for OEM mounting cavity compatibility, combined with the Integrated Concealed Crossover built into the tweeter assembly for a clean installation without external components. Butyl Rubber Surround — Excellent UV resistance, heat stability, and chemical resistance — consistent long-term durability in Australian vehicle conditions. Grilles and Mounting Hardware Included — Complete kit for a finished factory replacement installation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P16 Series Punch Speaker Size 6 inch (shallow) Configuration 2-Way Coaxial Power Handling (RMS) 55W per speaker ✓ (CEA-2031) Power Handling (Peak) 110W per speaker ✓ Impedance 4Ω ✓ Sensitivity 88dB @ 1W/1M ✓ Frequency Response 65Hz – 22kHz ✓ Mounting Depth 1.89" (48mm) ✓ Tweeter PEI Dome, 0.75" (19.0mm) ✓ Crossover Built-in (ICC, in tweeter) ✓ Cone Injection-Moulded Mineral-Filled Polypropylene Surround Butyl Rubber Basket FlexFit CEA-2031 Compliant Yes ✓ OEM Adapter Plates 5"×7" and 6"×9" pair (both included) ✓ Mounting Hardware Included ✓ Grilles Included ✓ Sold As Pair (2 speakers) ✓ Shipping Weight 5.8 lbs / 2.63 kg per pair ✓ Cutout Diameter Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable installation positions (with included adapters): Standard 6" round factory speaker positions 5"×7" oval positions (adapter included) 6"×9" oval positions (adapter included) Shallow cavities where standard-depth 6" speakers cannot be fitted Complete Punch series coaxial comparison: Feature P132 (3.5") P142 (4") P152 (5.25") P16 (6") RMS 20W ✓ 30W ✓ 40W ✓ 55W ✓ Sensitivity 85dB ✓ 86.5dB ✓ TBC 88dB ✓ Freq. Response 120Hz–22kHz ✓ 100Hz–22kHz ✓ TBC 65Hz–22kHz ✓ Mounting Depth 35mm ✓ 43mm ✓ TBC 48mm ✓ Tweeter 0.5" PEI ✓ TBC TBC 0.75" PEI ✓ Grilles No ✓ No ✓ Yes ✓ Yes ✓ CEA-2031 Not stated Yes ✓ TBC Yes ✓ Pairs well with: Rockford Fosgate T400-4, T600-4, or T1000-4AD 4-channel amplifiers Dedicated subwoofer system — the P16 extends to 65Hz, useful for many listening environments but a subwoofer handles deeper bass below this range Weight 2.63 kg per pair (shipping weight) Frequently Asked Questions What does "shallow" mean for the P16 and why does it matter? The P16's shallow design limits the mounting depth to 48mm (1.89") — the distance the speaker extends behind the mounting surface. Many vehicle door panels and OEM speaker positions have depth restrictions that prevent a standard-depth 6" or 6.5" speaker from fitting without cutting into the inner door structure. The P16's shallow mounting depth enables installation in these restricted positions without modification. What positions can the P16 be installed in? The P16 can be installed in standard 6" round speaker positions, and with the included adapter plates, 5"×7" and 6"×9" oval positions as well — covering three distinct OEM speaker formats from a single kit. How does the 65Hz lower frequency limit compare to other Punch series speakers? The P16 extends to 65Hz — significantly lower than the P132 (120Hz) and P142 (100Hz). In practical terms, the P16 reproduces kick drum, bass guitar, and lower vocal fundamentals from the speaker itself, reducing the listener's dependency on a subwoofer for satisfying bass at moderate listening levels. What makes the P16 more sensitive than the P132 or P142? At 88dB sensitivity, the P16 is 3dB above the P132 (85dB) and 1.5dB above the P142 (86.5dB). A 3dB sensitivity difference is equivalent to doubling the power input to produce the same volume — meaning the P16 produces noticeably more volume from the same head unit or amplifier power compared to the smaller Punch series speakers. Is the P16 suitable for a factory head unit installation? Yes. At 88dB sensitivity and a 4Ω impedance, the P16 is well-matched to factory and aftermarket head unit power levels. The 55W RMS rating provides substantial headroom for amplified installations as well. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less