PX2 Ranger Audio Upgrade Done Right 9" Pioneer Fitment, SWC, Camera and USB All Sorted Product Overview The Stinger HR9-FD002 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2015–2019 Ford Ranger PX2 models fitted with the factory 4.3" screen and CD mechanism. This complete bundle provides a flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, antenna adaptor, USB retention, and reverse camera retention all matched and engineered for the PX2 Ranger's dash and factory wiring. The HR9-FD002's SWC interface delivers a full suite of navigation outputs reverse, park, ignition, illumination, and VSS enabling proper head unit integration without additional wiring. The interface also retains its programming through battery disconnection. Please note: this kit is not compatible with PX2 Ranger models fitted with the factory 8" screen. The Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-FD002 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Ford Ranger PX2 2015–2019 — factory 4.3" screen with CD mechanism only Not compatible with: Ford Ranger models fitted with factory 8" screen Factory connector type: Not specified — confirm before purchase Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) SWC memory retention: Yes — retained on power loss Navigation outputs: Yes — reverse, park, ignition, illumination, VSS Reverse camera retention: Yes — reverse camera only USB retention: Yes — USB only (no AUX) Antenna adaptor: Included Colour: Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded for the PX2 Ranger's dash, delivering a factory-finish result around the larger 9" Pioneer screen with no gaps and no generic trims on show. Steering Wheel Audio Control Retention — Keeps factory steering wheel audio buttons active through the included interface with compatible aftermarket radios. Memory is retained even when battery power is lost, so flat batteries and workshop visits won't reset your setup. Full Navigation Outputs — The SWC interface provides reverse, park, ignition, illumination, and VSS signal outputs to the head unit — enabling full navigation and safety feature integration without additional wiring runs. Reverse Camera Retention — Passes the factory reverse camera signal through to the Pioneer head unit, maintaining reverse camera functionality after installation. USB Retention — Factory USB port is retained via the included harness, keeping factory USB connectivity functional with the new head unit. AUX is not retained. Plug & Play Harness — Connects directly to the PX2 Ranger's factory connector and converts to standard ISO — no splicing, no soldering, fully reversible. Antenna Adaptor Included — Factory antenna connection is retained via the included adaptor, maintaining FM/AM reception with no additional parts needed. Technical Specs Specification Detail Part Number HR9-FD002 Brand Stinger Colour Black Vehicle Plug Style Not specified — confirm with supplier Output Standard ISO connector Fascia Size 9" flush fit Factory Screen Requirement 4.3" screen with CD mechanism Not Compatible With Factory 8" screen models Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) SWC Memory Retained on power loss Navigation Outputs Reverse, Park, Ignition, Illumination, VSS Reverse Camera Retention Yes — reverse camera only USB Retention Yes — USB only AUX Retention Not included Antenna Adaptor Included Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Ford Ranger PX2 2015, 2016, 2017, 2018, 2019 — factory 4.3" screen with CD mechanism Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Ford Ranger steering wheel audio controls (retained via included interface) Factory Ford Ranger reverse camera (retained via included interface) Factory Ford Ranger USB port (retained via included harness) Caution: This kit is not compatible with PX2 Ranger models fitted with the factory 8" screen — confirm your vehicle's factory screen size before purchase. AUX retention is not included — USB only. Always verify compatibility with your specific Ranger variant before installation. Frequently Asked Questions Does the HR9-FD002 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-FD002 is an installation kit providing the fascia, wiring harness, SWC interface, antenna adaptor, USB retention, and reverse camera retention needed to fit that head unit into compatible PX2 Ranger models. How do I know if my Ranger is compatible with this kit? This kit suits 2015–2019 Ford Ranger PX2 models fitted with the factory 4.3" screen and CD mechanism. It is not compatible with models that came with the factory 8" screen. Check your vehicle's current factory screen size to confirm. Will this kit retain my factory steering wheel controls and reverse camera? Yes to both. The SWC interface retains audio button functions with compatible aftermarket radios, and the reverse camera retention interface passes the factory camera signal through to the Pioneer head unit. SWC memory is retained even if battery power is lost. What navigation outputs does this kit provide? The SWC interface provides reverse, park, ignition, illumination, and VSS signal outputs — a full suite of navigation and safety outputs for the Pioneer head unit without additional wiring. Is factory USB retained, and what about AUX? USB is retained via the included harness, keeping the factory USB port functional with the Pioneer head unit. AUX retention is not included with this kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

iLoad & iMax Audio Sorted Full 9" Pioneer Fitment With Every Output You Need Product Overview The Stinger HR9-HY001 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2018–2020 Hyundai iLoad and iMax models. This complete bundle provides a flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, antenna adaptor, USB retention, and reverse camera retention all matched and engineered for the iLoad/iMax factory wiring and dash. Beyond audio button retention, the HR9-HY001's SWC interface delivers a full suite of navigation outputs reverse, park, ignition, illumination, and VSS enabling proper head unit integration without additional wiring. The interface also retains its programming through battery disconnection. Please note: the Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-HY001 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Hyundai iLoad 2018–2020 / Hyundai iMax 2018–2020 Factory connector type: 38-pin + 35-pin Hyundai/Kia style connectors Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) SWC memory retention: Yes — retained on power loss Navigation outputs: Yes — reverse, park, ignition, illumination, VSS Reverse camera retention: Yes — included with interface USB retention: Yes — USB only (no AUX) Antenna adaptor: Included Colour: Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded for the iLoad and iMax dash, delivering a factory-finish result around the larger 9" Pioneer screen with no gaps or generic trims on show. Steering Wheel Audio Control Retention — Keeps factory steering wheel audio buttons active through the included interface with compatible aftermarket radios. Memory is retained even when battery power is lost. Full Navigation Outputs — The SWC interface provides reverse, park, ignition, illumination, and VSS signal outputs to the head unit — enabling full navigation and safety feature integration without additional wiring runs. Reverse Camera Retention — The reverse camera retention interface is included and integrated with the SWC harness, passing the factory camera signal directly to the Pioneer head unit. USB Retention — Factory USB port is retained via the included harness, keeping the factory USB connection functional with the new head unit. AUX is not retained. Plug & Play Harness (38-pin + 35-pin to ISO) — Connects directly to the iLoad/iMax factory 38-pin and 35-pin Hyundai/Kia connectors and converts to standard ISO — no splicing, no soldering, fully reversible. Antenna Adaptor Included — Factory antenna connection is retained via the included adaptor, maintaining FM/AM reception without additional parts. Technical Specs Specification Detail Part Number HR9-HY001 Brand Stinger Colour Black Vehicle Plug Style 38-pin + 35-pin Hyundai/Kia connectors Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) SWC Memory Retained on power loss Navigation Outputs Reverse, Park, Ignition, Illumination, VSS Reverse Camera Retention Included with interface USB Retention Yes — USB only AUX Retention Not included Antenna Adaptor Included Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Hyundai iLoad 2018, 2019, 2020 Hyundai iMax 2018, 2019, 2020 Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Hyundai iLoad/iMax steering wheel audio controls (retained via included interface) Factory Hyundai iLoad/iMax reverse camera (retained via included interface) Factory Hyundai iLoad/iMax USB port (retained via included harness) Caution: AUX retention is not included with this kit — USB only. If retaining factory AUX connectivity is a requirement, an additional retention harness will be needed. Always verify compatibility with your specific iLoad or iMax variant before installation. Frequently Asked Questions Does the HR9-HY001 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-HY001 is an installation kit providing the fascia, wiring harness, SWC interface, antenna adaptor, USB retention, and reverse camera retention needed to fit that head unit into compatible iLoad and iMax models. Is this kit compatible with both the Hyundai iLoad and iMax? Yes — the HR9-HY001 is designed to suit both the Hyundai iLoad and Hyundai iMax for the 2018–2020 model years, sharing the same factory connector configuration. Will this kit retain my factory steering wheel controls and reverse camera? Yes to both. The SWC interface retains audio button functions with compatible aftermarket radios, and the reverse camera retention interface is included and integrated with the harness. SWC memory is retained even if battery power is lost. What navigation outputs does this kit provide? The SWC interface provides reverse, park, ignition, illumination, and VSS signal outputs — a full suite of navigation and safety outputs for the Pioneer head unit without additional wiring. Is factory USB retained, and what about AUX? USB is retained via the included harness, keeping the factory USB port functional with the Pioneer head unit. AUX retention is not included with this kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean 9" Fitment for Your Tucson SWC, Reverse Camera and Nav Outputs All Sorted Product Overview The Stinger HR9-HY002 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2015–2018 Hyundai Tucson models. This complete bundle provides a flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, antenna adaptor, and reverse camera retention all matched and engineered for the Tucson's dash and factory wiring. The HR9-HY002's SWC interface goes beyond basic audio button retention, also delivering navigation outputs including park, ignition, and VSS signals to the head unit for proper safety and navigation feature integration. The interface retains its programming even if battery power is lost. Please note: the Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-HY002 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Hyundai Tucson 2015–2018 Factory connector type: Not specified — confirm before purchase Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) SWC memory retention: Yes — retained on power loss Navigation outputs: Yes — park, ignition, VSS Reverse camera retention: Yes — included Antenna adaptor: Included AUX/USB retention: Not specified Colour: Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded for the Tucson's dash, delivering a factory-finish result around the larger 9" Pioneer screen with no gaps and no generic trims on show. Steering Wheel Audio Control Retention — Keeps factory steering wheel audio buttons active through the included interface with compatible aftermarket radios. Memory is held even when battery power is lost, so workshop visits and flat batteries won't reset your setup. Navigation Outputs — The SWC interface provides park, ignition, and VSS signal outputs to the head unit, enabling proper navigation and safety feature integration without additional wiring. Reverse Camera Retention — Passes the factory reverse camera signal through to the Pioneer head unit, maintaining reverse camera functionality after installation. Plug & Play Harness — Connects directly to the Tucson's factory connector and converts to standard ISO — no splicing, no soldering, fully reversible. Antenna Adaptor Included — Factory antenna connection is retained via the included adaptor, maintaining FM/AM reception with no additional parts needed. Technical Specs Specification Detail Part Number HR9-HY002 Brand Stinger Colour Black Vehicle Plug Style Not specified — confirm with supplier Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) SWC Memory Retained on power loss Navigation Outputs Park, Ignition, VSS Reverse Camera Retention Included Antenna Adaptor Included AUX/USB Retention Not specified Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Hyundai Tucson 2015, 2016, 2017, 2018 Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Hyundai Tucson steering wheel audio controls (retained via included interface) Factory Hyundai Tucson reverse camera (retained via included interface) Frequently Asked Questions Does the HR9-HY002 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-HY002 is an installation kit providing the fascia, wiring harness, SWC interface, antenna adaptor, and reverse camera retention needed to fit that head unit into compatible Tucson models. Will this kit retain my factory steering wheel controls and reverse camera? Yes to both. The SWC interface retains audio button functions with compatible aftermarket radios, and the reverse camera retention interface passes the factory camera signal through to the Pioneer head unit. SWC memory is retained even if battery power is lost. What navigation outputs does this kit provide? The SWC interface provides park, ignition, and VSS signal outputs to the head unit, supporting proper navigation and safety feature integration without additional wiring. Is factory AUX or USB retention included? AUX and USB retention is not specified in the supplier data for this kit. Contact F.A.E. before purchase if retaining factory USB or AUX connectivity is important for your setup. Do I need to cut or splice any factory wiring? No — the HR9-HY002 is plug-and-play. The harness connects directly to the Tucson's factory connector and converts to standard ISO, so the install is clean and reversible with no permanent wiring modifications.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Pajero Audio Upgrade Done Right 9" Pioneer Fitment, Steering Wheel Controls and AUX Retained Product Overview The Stinger HR9-MT001 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2006–2015 Mitsubishi Pajero models. This bundle delivers a flush-fit 9" fascia and a plug-and-play steering wheel control interface everything needed to get the Pioneer seated cleanly in the Pajero's factory dash opening. The HR9-MT001 connects to the Pajero's factory 20-pin Mitsubishi connector and converts to a standard ISO plug with no permanent wiring changes. The SWC interface retains factory audio button functions and holds its programming through power loss. Where the vehicle is equipped with a factory AUX input, it is also retained via the interface. Please note: this kit is designed for non-amplified Pajero models the factory amplifier is not retained. No antenna adaptor, reverse camera retention, or USB retention is included. The Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-MT001 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Mitsubishi Pajero 2006–2015 (non-amplified models only) Factory connector type: 20-pin Mitsubishi style connector Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) SWC memory retention: Yes — retained on power loss AUX retention: Yes — if factory AUX equipped Reverse camera retention: Not included USB retention: Not specified Antenna adaptor: Not included Factory amplifier retention: No Colour: Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded for the Pajero's dash, delivering a factory-finish result around the larger 9" Pioneer screen without gaps or aftermarket trims on show. Steering Wheel Audio Control Retention — Retains factory steering wheel audio buttons via the included interface, keeping hands-free volume and track control exactly as the factory intended. Memory is held even through battery disconnection. Factory AUX Retention — Where the Pajero is fitted with a factory AUX input, the interface retains that connection, keeping the factory AUX port functional with the new head unit. Memory Retention on Power Loss — The SWC interface stores its programming when battery power is lost, so flat batteries and workshop visits won't reset your configuration. Plug & Play Harness (20-pin to ISO) — Connects directly to the Pajero's factory 20-pin Mitsubishi connector and converts to standard ISO — no splicing, no soldering, fully reversible. Technical Specs Specification Detail Part Number HR9-MT001 Brand Stinger Colour Black Vehicle Plug Style 20-pin Mitsubishi style connector Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) SWC Memory Retained on power loss AUX Retention Yes — if factory AUX equipped Reverse Camera Retention Not included USB Retention Not specified Antenna Adaptor Not included Factory Amplifier Retention No Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Mitsubishi Pajero 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Non-amplified models only Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Mitsubishi Pajero steering wheel audio controls (retained via included interface) Factory Mitsubishi Pajero AUX input — if equipped Caution: This kit is not compatible with factory-amplified Pajero variants — the factory amplifier is not retained. No antenna adaptor is included; confirm whether your vehicle requires one before purchase. Reverse camera retention is not included — if your Pajero has a factory or aftermarket reverse camera, an additional integration product will be required. Frequently Asked Questions Does the HR9-MT001 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-MT001 is an installation kit providing the fascia and SWC interface needed to fit that head unit into compatible non-amplified Pajero models. Is this kit compatible with factory-amplified Pajero models? No — the HR9-MT001 is designed for non-amplified models only. The factory amplifier is not retained by this kit. If your Pajero is fitted with a factory amplifier, this kit is not suitable. Will this kit retain my factory steering wheel controls and AUX input? Steering wheel audio buttons are retained via the included SWC interface with compatible aftermarket radios. Factory AUX is also retained where the vehicle is equipped with it. SWC memory is held even if battery power is lost. Does this kit include an antenna adaptor or reverse camera retention? No — neither is included with the HR9-MT001. If your Pajero requires an antenna adaptor or reverse camera integration, additional products will be needed. Do I need to cut or splice any factory wiring? No — the HR9-MT001 is plug-and-play. The harness connects directly to the Pajero's factory 20-pin Mitsubishi connector and converts to standard ISO, so the install is clean and reversible with no permanent wiring modifications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Right Kit for Your Navara 9" Pioneer Fitment With Nav Outputs, SWC and Camera Sorted Product Overview The Stinger HR9-NS001 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2015–2019 Nissan Navara SL, ST, and STX variants. This is a complete, matched installation package flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, antenna adaptor, USB retention, and reverse camera retention engineered specifically for the Navara's dash and factory wiring. Beyond basic SWC and camera retention, the HR9-NS001's interface also provides full navigation outputs (reverse, park, ignition, illumination, and VSS signals) and allows the clock in the Navara's multi-function display to be adjusted and set. The kit is compatible with non-amplified SL, ST, and STX models only it is not suitable for factory-amplified variants or vehicles fitted with the factory 360-degree camera system. The Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-NS001 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Nissan Navara 2015–2019 — SL, ST, STX (non-amplified models only) Not compatible with: Factory 360-degree camera system; factory-amplified models Factory connector type: 20-pin + 32-pin Nissan connectors Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) SWC memory retention: Yes — retained on power loss Navigation outputs: Yes — reverse, park, ignition, illumination, VSS MFD clock adjustment: Yes — set clock via multi-function display Reverse camera retention: Yes — standard reverse camera only (not 360) USB retention: Yes — USB only (no AUX) Antenna adaptor: Included Factory amplifier retention: No Colour: Gloss Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded for the Navara's dash, delivering a factory-finish result around the larger Pioneer screen with no gaps and no generic adaptors on show. Steering Wheel Audio Control Retention — Retains factory steering wheel audio buttons via the included interface, keeping hands-free volume and track control without additional hardware. Memory is retained even if battery power is lost. Full Navigation Outputs — The SWC interface provides reverse, park, ignition, illumination, and VSS signal outputs to the head unit — enabling proper navigation and safety feature integration without additional wiring. MFD Clock Adjustment — Allows the clock in the Navara's multi-function display to be set directly from the interface, preserving a clean dash experience after installation. Reverse Camera Retention — Passes the factory reverse camera signal through to the Pioneer head unit. Compatible with the standard factory reverse camera only — not the 360-degree camera system. USB Retention — Factory USB port is retained via the included harness, keeping the factory USB connection functional with the new head unit. AUX is not retained. Plug & Play Harness (20-pin + 32-pin to ISO) — Connects directly to the Navara's factory connector configuration and converts to standard ISO — no splicing, no soldering, fully reversible. Antenna Adaptor Included — Factory antenna connection retained via the included adaptor, maintaining FM/AM reception without additional parts. Technical Specs Specification Detail Part Number HR9-NS001 Brand Stinger Colour Gloss Black Vehicle Plug Style 20-pin + 32-pin Nissan connectors Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) SWC Memory Retained on power loss Navigation Outputs Reverse, Park, Ignition, Illumination, VSS MFD Clock Adjustment Yes Reverse Camera Retention Yes — standard reverse camera only 360-Degree Camera Compatibility Not compatible USB Retention Yes — USB only AUX Retention Not included Antenna Adaptor Included Factory Amplifier Retention No Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Nissan Navara 2015, 2016, 2017, 2018, 2019 — SL, ST, STX grades Non-amplified models only Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Nissan Navara steering wheel audio controls (retained via included interface) Factory Nissan Navara standard reverse camera (not 360-degree camera system) Factory Nissan Navara USB port (retained via included harness) Caution: This kit is not compatible with factory-amplified Navara variants — the factory amplifier is not retained. The factory 360-degree camera system is not supported; standard reverse camera only. AUX retention is not included. Always confirm your Navara's grade and audio configuration before purchase. Frequently Asked Questions Does the HR9-NS001 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-NS001 is an installation kit providing the fascia, wiring harness, SWC interface, antenna adaptor, USB retention, and reverse camera retention needed to fit that head unit into compatible Navara models. Which Navara grades is this kit compatible with? This kit suits 2015–2019 Nissan Navara SL, ST, and STX grades with non-amplified factory audio. It is not compatible with factory-amplified variants or vehicles fitted with the factory 360-degree camera system. Will this kit retain my factory steering wheel controls and reverse camera? Yes to both — the SWC interface retains audio button functions with compatible aftermarket radios, and the reverse camera retention interface passes the factory camera signal to the Pioneer head unit. Note: the 360-degree camera system is not supported, and SWC memory is retained even if battery power is lost. What navigation outputs does this kit provide? The SWC interface provides reverse, park, ignition, illumination, and VSS signal outputs to the head unit. It also allows the clock in the Navara's multi-function display to be adjusted and set after installation. Is the factory USB port retained, and what about AUX? USB is retained via the included harness, keeping the factory USB port functional with the Pioneer head unit. AUX retention is not included with this kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean 9" Fitment for Your Forester or Impreza Plug In, Keep Your Steering Wheel Controls Product Overview The Stinger HR9-SB001 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2007–2012 Subaru Forester and Impreza models. This bundle provides a complete, matched installation package flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, and antenna adaptor all engineered to work together in these vehicles. The HR9-SB001 connects directly to the factory 20-pin connector, converting it to a standard ISO plug with no permanent wiring changes. The SWC interface retains audio button functions and holds its programming even when battery power is lost. Please note: this kit is compatible with non-navigation models only, and does not retain steering wheel phone buttons if your vehicle is equipped with them. The Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-SB001 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Subaru Forester 2007–2012 / Subaru Impreza 2007–2012 Navigation models: Not compatible — non-navigation models only Factory connector type: 20-pin vehicle plug Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios; audio buttons only) Steering wheel phone button retention: No — phone buttons not retained SWC memory retention: Yes — retained on power loss Reverse camera retention: Not included Antenna adaptor: Included Colour: Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded to suit the Forester and Impreza dash, delivering a factory-finish result around the larger 9" Pioneer screen without gaps or aftermarket adaptors on show. Steering Wheel Audio Control Retention — Retains the factory steering wheel audio buttons (volume, track) through the included interface, keeping hands-free audio control exactly where it belongs. Memory Retention on Power Loss — The SWC interface holds its programming even when the battery is disconnected, so dead batteries and workshop visits won't reset your setup. Plug & Play Harness (20-pin to ISO) — Plugs directly into the factory 20-pin loom and converts to standard ISO — no splicing, no soldering, fully reversible. Antenna Adaptor Included — Factory antenna connection is retained via the included adaptor, preserving FM/AM reception with no additional parts needed. Technical Specs Specification Detail Part Number HR9-SB001 Brand Stinger Colour Black Vehicle Plug Style 20-pin connector Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios; audio buttons only) Steering Wheel Phone Buttons Not retained SWC Memory Retained on power loss Antenna Adaptor Included Reverse Camera Retention Not included Navigation Model Compatibility Non-navigation models only Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Subaru Forester 2007, 2008, 2009, 2010, 2011, 2012 (non-navigation models) Subaru Impreza 2007, 2008, 2009, 2010, 2011, 2012 (non-navigation models) Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Subaru steering wheel audio controls (retained via included interface; audio buttons only) Standard ISO aftermarket radio wiring accessories Caution: This kit is not compatible with factory navigation-equipped models. Steering wheel phone buttons are not retained — audio buttons only. Reverse camera retention is not included with this kit. Frequently Asked Questions Does the HR9-SB001 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-SB001 is an installation kit only, providing the fascia, wiring harness, SWC interface, and antenna adaptor needed to fit that head unit into your 2007–2012 Forester or Impreza. Is this kit compatible with factory navigation models? No — the HR9-SB001 is compatible with non-navigation models only. If your Forester or Impreza is fitted with the factory navigation system, this kit is not suitable. Will this kit retain all of my steering wheel control buttons? Audio buttons only — volume and track controls are retained via the included SWC interface. Steering wheel phone buttons are not retained by this kit, even if your vehicle is equipped with them. Does this kit include reverse camera retention? No — reverse camera retention is not included with the HR9-SB001. If reverse camera integration is required, a separate camera harness compatible with the Pioneer DMH-AP6650BT will be needed. Do I need to cut or splice any factory wiring? No — the HR9-SB001 is plug-and-play. The harness connects directly to the factory 20-pin connector and converts to a standard ISO plug, so the install is clean and reversible with no permanent modifications to the factory loom. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Upgrade Your Older Swift Clean 9" Fitment, Factory Controls Retained Product Overview The Stinger HR9-SZ001 is a purpose-built radio replacement kit designed for installing the Pioneer DMH-AP6650BT 9" head unit into 2011–2016 Suzuki Swift models. Unlike later-generation Swift kits, this bundle is engineered specifically for the earlier dash layout delivering a flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, and antenna adaptor in a single, matched package. The HR9-SZ001 connects directly to the Swift's factory 20-pin connector and converts to a standard ISO plug no permanent wiring changes required. However, due to the dash geometry of 2011–2016 Swift models, some physical modification to the dash aperture is necessary to accommodate the larger 9" screen. Professional installation is recommended. Please note: the Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-SZ001 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Suzuki Swift 2011–2016 Factory connector type: 20-pin vehicle plug Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) Antenna adaptor: Included Reverse camera retention: Not included AUX/USB retention: Not specified Colour: Black Plug & Play: Yes Dash modification required: Yes — professional installation recommended Features & Benefits 9" Flush Fit Radio Panel — Designed to frame the Pioneer DMH-AP6650BT's larger screen within the 2011–2016 Swift's dash, delivering a clean, purpose-built result rather than a generic aftermarket finish. Steering Wheel Audio Control Retention — Keeps your factory steering wheel audio buttons active through the included interface, maintaining hands-free volume and track control without additional programming hardware. Plug & Play Harness (20-pin to ISO) — Mates directly with the Swift's factory 20-pin connector and converts to a standard ISO plug — no wire cutting, no soldering, no permanent modifications to the factory loom. Antenna Adaptor Included — The factory antenna connection is retained via the included adaptor, preserving FM/AM reception with no additional parts needed. Complete Bundle — Fascia panel, SWC interface, patch lead, and antenna adaptor are all matched and supplied together, eliminating the guesswork of sourcing individual parts. Technical Specs Specification Detail Part Number HR9-SZ001 Brand Stinger Colour Black Vehicle Plug Style 20-pin connector Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) Antenna Adaptor Included Reverse Camera Retention Not included AUX/USB Retention Not specified Dash Modification Required Yes — professional installation recommended Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Suzuki Swift 2011, 2012, 2013, 2014, 2015, 2016 Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Suzuki Swift steering wheel audio controls (retained via included interface) Standard ISO aftermarket radio wiring accessories Caution: This kit does not include a reverse camera retention interface. If your 2011–2016 Swift is fitted with a factory or aftermarket reverse camera, a separate camera integration harness will be required. Dash modification is needed to fit the 9" fascia — the extent of modification will vary by individual vehicle. Professional installation is strongly recommended. Frequently Asked Questions Does the HR9-SZ001 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-SZ001 is an installation kit only, providing the fascia, wiring harness, SWC interface, and antenna adaptor needed to fit that head unit into your 2011–2016 Swift. Will this kit retain my Suzuki Swift's factory steering wheel controls? Yes, in most cases. The included steering wheel control interface retains audio button functions with compatible aftermarket radios including the Pioneer DMH-AP6650BT. Confirm compatibility with your specific head unit before purchase. Do I need to modify the dash to install this kit? Yes — Stinger notes that dash modification is required for the 2011–2016 Swift to accommodate the 9" fascia. The extent of modification will vary between vehicles, and professional installation is recommended to achieve a clean result. Does this kit include reverse camera retention? No — this kit does not include a reverse camera retention interface. If you require reverse camera integration, a separate camera harness compatible with the Pioneer DMH-AP6650BT will be needed. Do I need to cut or splice any factory wiring? No — the harness is plug-and-play. It connects directly to the Swift's factory 20-pin connector and converts to a standard ISO plug, so no permanent changes to the factory loom are required.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Cleanest Swap for Your Suzuki Swift Everything You Need, Nothing You Don't Product Overview The Stinger HR9-SZ002 is a purpose-built radio replacement kit designed specifically for installing the Pioneer DMH-AP6650BT 9" head unit into 2017–2024 Suzuki Swift models. Rather than hunting down individual adaptors and hoping they work together, this bundle delivers a single, engineered solution flush-fit fascia, steering wheel control interface, antenna adaptor, and reverse camera retention all in one box. Built on a genuine plug-and-play philosophy, the HR9-SZ002 mates directly with the Swift's factory 20-pin connector, converting it to a standard ISO connector for a clean, professional install. It's ideal for Swift owners who want a modern aftermarket radio without cutting factory wiring or losing OEM functions. Please note: the Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-SZ002 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Suzuki Swift 2017–2024 Factory connector type: 20-pin vehicle plug Output connector type: Standard ISO connector Steering wheel audio control retention: Yes (select aftermarket radios) Reverse camera retention: Yes (modifications may be required) Antenna adaptor: Included AUX/USB retention: Not included Colour: Black Plug & Play: Yes Features & Benefits 9" Flush Fit Radio Panel — Purpose-moulded to suit the Swift's dash, the fascia provides a factory-finish result around the larger 9" Pioneer screen. No gaps, no filler strips, no rattles. Steering Wheel Audio Control Retention — Keeps your factory steering wheel buttons active through a dedicated audio interface, so you don't lose hands-free volume and track control on the open road. Memory Retention on Power Loss — The steering wheel interface stores its programming even when the battery is disconnected, so a flat battery or workshop visit won't wipe your settings. Plug & Play Harness (20-pin to ISO) — Direct-plug connection from Swift's factory 20-pin loom to standard ISO — no splicing, no soldering, and a clean reversible install. Antenna Adaptor Included — Factory antenna plugs straight in via the included adaptor, maintaining solid FM/AM reception without the need for additional parts. Reverse Camera Retention — Allows the factory reverse camera signal to pass through to the Pioneer head unit. Note: some vehicles may require harness modification — compare the interface to your factory harness before connecting. Technical Specs Specification Detail Part Number HR9-SZ002 Brand Stinger Colour Black Vehicle Plug Style 20-pin connector Output Standard ISO connector Fascia Size 9" flush fit Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained (compatible aftermarket radios) SWC Memory Retained on power loss Antenna Adaptor Included Reverse Camera Retention Included (modification may be required) AUX/USB Retention Not included Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Suzuki Swift 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Suzuki Swift steering wheel audio controls (retained via included interface) Factory Suzuki Swift reverse camera (retention harness included; some vehicles may require modification) Standard ISO aftermarket radio wiring accessories Frequently Asked Questions Does the HR9-SZ002 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-SZ002 is purely an installation kit (fascia, harness adaptor, antenna adaptor, and camera retention) designed to make that head unit fit cleanly into your Swift's dash. Will this kit retain my Suzuki Swift's factory steering wheel controls? Yes, in most cases. The included audio interface retains steering wheel audio button functions with compatible aftermarket radios including the Pioneer DMH-AP6650BT. The interface also stores its memory if power is disconnected. Do I need to cut or splice any factory wiring? No — the HR9-SZ002 is a plug-and-play kit. The harness connects directly to your Swift's factory 20-pin connector and converts to a standard ISO plug, so the install is clean and reversible with no permanent wiring modifications. Will my factory reverse camera still work after installation? In most instances, yes — the kit includes a reverse camera retention interface. However, Stinger notes that some vehicles may require the interface harness to be modified or re-wired. Always compare the included harness against your factory connector before plugging in. Does this kit retain the factory AUX or USB ports? No — AUX/USB retention is not included with the HR9-SZ002. If retaining factory AUX or USB connectivity is a requirement for your build, you will need a separate AUX/USB retention harness compatible with the Suzuki Swift. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Radio Replacement Bundle Suzuki Vitara 2015–2024 for Pioneer DMH-AP6650BT 9". Includes Fascia, SWC Interface, Antenna Adaptor, and Reverse Camera Retention.  Product Overview The Stinger HR9-SZ003 is a radio replacement bundle for installing the Pioneer DMH-AP6650BT 9-inch head unit into a Suzuki Vitara manufactured between 2015 and 2024. The bundle includes a 9-inch flush fit radio panel, a plug-and-play steering wheel control (SWC) interface with patch lead, an antenna adaptor, and a reverse camera retention interface. The 20-pin Suzuki connector is used for plug-and-play connection from the factory loom to standard ISO, and the SWC interface retains factory steering wheel audio controls with memory retention even after power loss. There is an important caveat specific to this bundle: in some instances the reverse camera retention interface will require modification or re-wiring to connect correctly to the factory camera harness. Before connecting, compare the HR9-SZ003 camera interface harness to the vehicle's factory camera harness if they do not match, re-wiring or adaptation will be required. This is not universal to all Vitara variants but applies in some cases, and professional installation is recommended to handle this assessment and any required modification. The Pioneer DMH-AP6650BT head unit is not included. For Vitara owners who need only the fascia panel, the SF9-SZ03 is the correct product. What's in the Box 9-inch flush fit radio panel (Suzuki Vitara specific) Steering wheel control (SWC) interface and patch lead Antenna adaptor Reverse camera retention interface Key Specifications Specification Detail Part Number HR9-SZ003 Brand Stinger Vehicle Suzuki Vitara 2015–2024 Compatible Head Unit Pioneer DMH-AP6650BT (9-inch) Head Unit Included No Fascia Type 9-inch flush fit panel Vehicle Connector 20-pin Suzuki Harness Type Plug and play — factory to standard ISO Antenna Adaptor Yes — included SWC Interface Yes — included (retains factory audio controls) SWC Memory Retention Yes — retains memory if power is lost Reverse Camera Retention Yes — modification may be required in some instances AUX/USB Retention Not specified — confirm with Stinger Colour Black Features & Benefits Vitara-Specific 2015–2024 Coverage Precision-engineered for the Suzuki Vitara LY-series dashboard from 2015 to 2024 — plug-and-play to the 20-pin factory connector without cutting or modification to the main harness. Reverse Camera Retention — With Important Caveat The reverse camera retention interface is included, but in some Vitara variants the interface harness may not directly match the factory camera connector and will require modification or re-wiring. Compare the HR9-SZ003 camera harness to the vehicle's factory camera harness before connecting. Professional installation is recommended for this assessment. SWC Interface — Memory Retention After Power Loss Factory steering wheel audio controls are retained with the Pioneer DMH-AP6650BT, and the SWC programming is maintained even after battery disconnects or power loss. Flush Fit Panel The 9-inch flush fit panel integrates the Pioneer DMH-AP6650BT into the Vitara dashboard with a factory-style appearance. Antenna Adaptor Included The Suzuki-specific antenna adaptor is included in the bundle. Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Suzuki Vitara 2015–2024 Head unit: Pioneer DMH-AP6650BT (9-inch) — not included Not included — may need to be sourced separately: AUX/USB retention (not specified — confirm with Stinger) Camera re-wiring (if required — confirm during installation) Frequently Asked Questions Is the Pioneer DMH-AP6650BT included? No — the HR9-SZ003 is the installation hardware bundle only. The Pioneer DMH-AP6650BT head unit must be purchased separately. Will the factory reverse camera work after installation? The reverse camera retention interface is included, but in some Vitara variants the interface harness may not directly match the factory camera connector and will require modification or re-wiring. Before connecting, compare the HR9-SZ003 camera harness to the vehicle's factory harness. If they do not match, professional re-wiring will be required. Will my factory steering wheel controls work after installation? Yes — the SWC interface retains factory steering wheel audio controls with the Pioneer DMH-AP6650BT and maintains programming even after power loss. What is the difference between the HR9-SZ003 and the SF9-SZ03? The SF9-SZ03 is the fascia panel only for the Suzuki Vitara 2015–2024. The HR9-SZ003 is a complete installation bundle that also includes the SWC interface, antenna adaptor, and reverse camera retention interface. Choose the HR9-SZ003 for a more complete single-purchase installation kit. Does the HR9-SZ003 include AUX/USB retention? AUX/USB retention is not specified in the product documentation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Upgrade Your Older Toyota's Audio Clean 9" Fitment, Steering Wheel Controls Kept Product Overview The Stinger HR9-TY001 is a radio replacement kit built for installing the Pioneer DMH-AP6650BT 9" head unit into a wide range of Toyota vehicles from 2005 to 2012 that feature a factory 200mm head unit opening. This bundle provides a flush-fit 9" fascia and a plug-and-play steering wheel control interface everything needed to get the Pioneer head unit seated cleanly in compatible Toyota dash openings. The HR9-TY001 connects to Toyota's factory 20-pin + 10-pin + 6-pin connector configuration and converts to a standard ISO plug with no permanent wiring changes. The SWC interface retains audio button functions on models with the 20-pin connector and holds its programming through power loss. Please note: no antenna adaptor, USB retention, or reverse camera retention is included additional products may be required depending on your vehicle's configuration. The Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-TY001 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Select Toyota models 2005–2012 with factory 200mm head unit opening Factory connector type: 20-pin + 10-pin + 6-pin Toyota style connectors Output connector type: Standard ISO connector Steering wheel audio control retention: Yes — models with 20-pin connector only SWC memory retention: Yes — retained on power loss Reverse camera retention: No — additional product may be required Antenna adaptor: Not included AUX/USB retention: Not specified Factory amplifier retention: Not specified Colour: Black Plug & Play: Yes Fascia bracket modification: May be required on some vehicles Head unit fitment depth: May sit forward of factory dash panel Features & Benefits 9" Flush Fit Radio Panel — Designed around Toyota's 200mm factory opening, delivering a purpose-built result for the larger Pioneer screen across compatible older Toyota models. Steering Wheel Audio Control Retention — Retains factory steering wheel audio buttons on models fitted with the 20-pin connector. The interface holds its programming even if battery power is lost, so a flat battery won't reset your setup. Plug & Play Harness — Connects to Toyota's factory 20-pin + 10-pin + 6-pin loom and converts to standard ISO — no splicing, no soldering, fully reversible. Memory Retention on Power Loss — The SWC interface stores its programming when disconnected from battery power, keeping settings intact through workshop visits and battery changes. Technical Specs Specification Detail Part Number HR9-TY001 Brand Stinger Colour Black Vehicle Plug Style 20-pin + 10-pin + 6-pin Toyota connectors Output Standard ISO connector Fascia Size 9" flush fit Factory Opening Required 200mm Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained — 20-pin connector models only SWC Memory Retained on power loss Reverse Camera Retention Not included — additional product may be required Antenna Adaptor Not included AUX/USB Retention Not specified Fascia Bracket Modification May be required on some vehicles Head Unit Fitment Depth May sit forward of factory dash panel Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Select Toyota models 2005–2012 with factory 200mm head unit opening Toyota vehicles fitted with 20-pin + 10-pin + 6-pin factory connector configuration Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Toyota steering wheel audio controls — 20-pin connector models only Frequently Asked Questions Does the HR9-TY001 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-TY001 is an installation kit providing the fascia and SWC interface needed to fit that head unit into compatible Toyota models with a 200mm factory opening. Which Toyota models is the HR9-TY001 compatible with? This kit suits select Toyota models from 2005 to 2012 with a factory 200mm head unit opening and the Toyota 20-pin + 10-pin + 6-pin connector configuration. Confirm your specific vehicle's factory opening size and connector type before purchase. Will this kit retain my Toyota's factory steering wheel controls? Yes — on models fitted with the 20-pin connector. The included SWC interface retains audio button functions with compatible aftermarket radios and holds its programming if battery power is lost. Does this kit include an antenna adaptor or reverse camera retention? No — neither an antenna adaptor nor a reverse camera retention interface is included with the HR9-TY001. If your vehicle requires an antenna adaptor or reverse camera integration, additional products will be needed. Will the head unit sit flush with my dash after installation? Not always — Stinger notes that on some vehicles the head unit will sit forward of the factory dash panel and fascia brackets may require modification. The extent varies by vehicle, and professional installation is recommended if you are unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

One Kit, Dozens of Toyotas 9" Pioneer Fitment With Factory Controls Retained Product Overview The Stinger HR9-TY002 is a radio replacement kit engineered for installing the Pioneer DMH-AP6650BT 9" head unit into a wide range of Toyota vehicles from 2010 to 2020 that feature a factory 200mm head unit opening. Rather than a single-vehicle solution, this kit is designed to span Toyota's broad range delivering a flush-fit 9" fascia, plug-and-play wiring harness, steering wheel control interface, antenna adaptor, reverse camera retention, and USB retention in one matched bundle. The HR9-TY002 supports vehicles fitted with the factory 28-pin connector for SWC retention, and retains the factory reverse camera where the camera wiring runs through the 24-pin connector. Please note: on some vehicles the head unit will sit forward of the factory dash panel, and fascia bracket modification may be required. The Pioneer DMH-AP6650BT head unit is not included. Key Specifications Manufacturer Part Number: HR9-TY002 Compatible head unit: Pioneer DMH-AP6650BT (9" display) Vehicle compatibility: Select Toyota models 2010–2020 with factory 200mm head unit opening Factory connector type: 28-pin + 24-pin + 10-pin + 6-pin Toyota style connectors Output connector type: Standard ISO connector Steering wheel audio control retention: Yes — models with 28-pin connector only SWC memory retention: Yes — retained on power loss Reverse trigger: Yes — provided via SWC interface Reverse camera retention: Yes — vehicles with camera wiring in the 24-pin connector only USB retention: Yes — AUX & USB retained Antenna adaptor: Included Factory amplifier retention: No Colour: Black Plug & Play: Yes Fascia bracket modification: May be required on some vehicles Head unit depth: Will sit forward of factory dash panel on some vehicles Features & Benefits 9" Flush Fit Radio Panel — Designed around Toyota's 200mm factory opening, delivering a purpose-built result for the larger Pioneer screen across a wide range of Toyota models. Steering Wheel Audio Control Retention — Retains factory steering wheel audio buttons via the included interface on models with the 28-pin connector. The interface holds its programming even if battery power is lost. Reverse Trigger Output — The SWC interface provides a reverse trigger signal to the head unit, enabling automatic camera activation on reverse without additional wiring. Reverse Camera Retention — Passes the factory reverse camera signal through to the Pioneer head unit on vehicles where camera wiring runs through the 24-pin connector. Camera retention is not guaranteed on all variants. USB & AUX Retention — Both USB and AUX factory connections are retained via the included harness, keeping factory USB/AUX ports functional with the new head unit. Plug & Play Harness — Connects directly to Toyota's multi-plug factory loom (28-pin + 24-pin + 10-pin + 6-pin) and converts to standard ISO — no splicing, no soldering, fully reversible. Antenna Adaptor Included — Factory antenna connection is retained via the included adaptor, maintaining FM/AM reception with no additional parts needed. Technical Specs Specification Detail Part Number HR9-TY002 Brand Stinger Colour Black Vehicle Plug Style 28-pin + 24-pin + 10-pin + 6-pin Toyota connectors Output Standard ISO connector Fascia Size 9" flush fit Factory Opening Required 200mm Plug & Play Yes — factory to ISO, no splicing required Steering Wheel Audio Controls Retained — 28-pin connector models only SWC Memory Retained on power loss Reverse Trigger Yes — provided via SWC interface Reverse Camera Retention Yes — 24-pin connector camera wiring only USB & AUX Retention Yes — included Antenna Adaptor Included Factory Amplifier Retention No Fascia Bracket Modification May be required on some vehicles Head Unit Fitment Depth May sit forward of factory dash panel Head Unit Compatibility Pioneer DMH-AP6650BT Compatible With / Goes Well With Select Toyota models 2010–2020 with factory 200mm head unit opening Toyota vehicles fitted with 28-pin + 24-pin + 10-pin + 6-pin factory connector configuration Pioneer DMH-AP6650BT 9" Digital Media Receiver (head unit not included) Factory Toyota steering wheel audio controls — 28-pin connector models only Factory Toyota reverse camera — vehicles with camera wiring through the 24-pin connector only Factory Toyota USB & AUX ports (retained via included harness) Frequently Asked Questions Does the HR9-TY002 include the Pioneer DMH-AP6650BT head unit? No — the Pioneer DMH-AP6650BT is sold separately. The HR9-TY002 is an installation kit only, supplying the fascia, wiring harness, SWC interface, antenna adaptor, reverse camera retention, and USB/AUX retention needed to fit that head unit into compatible Toyota models. Which Toyota models is the HR9-TY002 compatible with? This kit suits select Toyota models from 2010 to 2020 with a factory 200mm head unit opening and the Toyota 28-pin + 24-pin + 10-pin + 6-pin connector configuration. Confirm your specific vehicle's factory opening size and connector type before purchase. Will this kit retain my Toyota's factory steering wheel controls? Yes — on models fitted with the 28-pin connector. The included SWC interface retains audio button functions with compatible aftermarket radios, and holds its programming if battery power is lost. Will my factory reverse camera work after installation? Only if your vehicle's reverse camera wiring runs through the 24-pin connector. Where this is the case, the included retention interface passes the camera signal through to the Pioneer head unit. Vehicles with camera wiring on other connectors are not supported by this kit. Will the head unit sit flush with my dash after installation? Not always — Stinger notes that on some vehicles the head unit will sit forward of the factory dash panel, and fascia brackets may require modification. The extent of this varies by vehicle, and professional installation is recommended if you are unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Complete Radio Replacement Bundle Toyota RAV4 XA40 2014–2018 for Pioneer DMH-AP6650BT. Includes Fascia, SWC Interface, Antenna Adaptor, Reverse Camera Retention, and USB.  Product Overview The Stinger HR9-TY003 is a comprehensive radio replacement bundle for installing the Pioneer DMH-AP6650BT 9-inch head unit into a 2014–2018 Toyota RAV4 (XA40 Series). It is the most complete installation bundle in the Stinger HR9 range including five components in a single purchase: a 9-inch flush fit radio panel, a plug-and-play steering wheel control (SWC) interface with patch lead and reverse trigger, an antenna adaptor, a reverse camera retention interface, and AUX/USB retention. The harness uses Toyota's 28-pin, 10-pin, and 6-pin connectors for a direct plug-and-play connection to the RAV4 XA40 factory loom, and the SWC interface retains factory steering wheel audio controls with memory retention even after power loss. There are two important compatibility limitations: the HR9-TY003 is not compatible with RAV4 XA40 models fitted with the factory JBL premium audio system (the factory amplifier is not retained), and the fascia does not sit perfectly flush against the left-hand side air vent there is a 2mm step on that side. Both are manufacturing characteristics of this installation, not faults, but buyers and installers should confirm these are acceptable before purchasing. The Pioneer DMH-AP6650BT head unit is not included. What's in the Box 9-inch flush fit radio panel (RAV4 XA40 specific) Steering wheel control (SWC) interface and patch lead Antenna adaptor Reverse camera retention interface AUX and USB retention Key Specifications Specification Detail Part Number HR9-TY003 Brand Stinger Vehicle Toyota RAV4 XA40 2014–2018 Compatible Head Unit Pioneer DMH-AP6650BT (9-inch) Head Unit Included No Fascia Type 9-inch flush fit panel Fascia Note 2mm step at left-hand side air vent — not fully flush Vehicle Connectors 28-pin, 10-pin, and 6-pin Toyota Harness Type Plug and play — factory to standard ISO Antenna Adaptor Yes — included SWC Interface Yes — included (retains factory audio controls) SWC Memory Retention Yes — retains memory if power is lost SWC Outputs Reverse Trigger Reverse Camera Retention Yes — interface included AUX/USB Retention Yes — AUX and USB Factory Amplifier Not retained JBL System Not compatible Colour Black Features & Benefits Five Components in One Bundle The HR9-TY003 is the most complete installation bundle in the Stinger range — combining flush fit fascia, SWC interface, antenna adaptor, reverse camera retention interface, and AUX/USB retention in a single purchase, minimising the risk of missing a required component. Flush Fit Panel with One Known Limitation The panel provides a flush fit result in the RAV4 XA40 dashboard — with one noted exception: there is a 2mm step between the fascia and the left-hand side air vent. This is a known manufacturing characteristic, not a fault, but should be confirmed as acceptable before installation. Reverse Camera Retention Included The factory RAV4 reverse camera is retained through the included reverse camera retention interface — allowing the factory reversing image to display through the Pioneer DMH-AP6650BT when reverse gear is selected. AUX and USB Retention Factory AUX and USB inputs are retained through the included retention module — buyers do not need to purchase these separately. Plug and Play Toyota Harness Toyota's 28-pin, 10-pin, and 6-pin connectors are used throughout the XA40 RAV4. The HR9-TY003 is fully plug-and-play to standard ISO — no wire cutting or modification required. SWC Interface — Memory Retention After Power Loss The SWC interface retains steering wheel control programming even after a battery disconnect or power loss, preventing the need to reprogram following any electrical work. JBL System Not Compatible — Check Before Purchasing The HR9-TY003 does not retain the factory JBL amplifier. RAV4 XA40 models equipped with the JBL premium audio system are not compatible with this bundle. Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Chassis Notes Toyota RAV4 2014–2018 XA40 JBL-equipped models NOT compatible Not compatible with: Toyota RAV4 XA40 models with factory JBL audio system Toyota RAV4 2019 and newer (XA50 — different platform) Head unit: Pioneer DMH-AP6650BT (9-inch) — not included Frequently Asked Questions Is the Pioneer DMH-AP6650BT head unit included? No — the HR9-TY003 is the installation hardware bundle only. The Pioneer DMH-AP6650BT head unit must be purchased separately. My RAV4 has a JBL audio system. Can I use this kit? No — the HR9-TY003 does not retain the factory JBL amplifier and is not compatible with RAV4 XA40 models equipped with the JBL premium audio system. If the vehicle has JBL audio, a different installation approach is required. Will my factory reverse camera work after installation? Yes — the HR9-TY003 includes a reverse camera retention interface that allows the factory RAV4 reverse camera to display through the Pioneer DMH-AP6650BT when reverse gear is selected. Will my factory USB and AUX inputs be retained? Yes — the HR9-TY003 includes AUX and USB retention as part of the bundle. Why does the fascia have a 2mm step at the left-hand side air vent? The 2mm step between the fascia panel and the left-hand side air vent is a known manufacturing characteristic of the HR9-TY003 fascia design for the RAV4 XA40 dashboard. It is not a fitment fault but should be confirmed as acceptable before installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less