Clean Single DIN Upgrade for Your Audi A4 or S4 No Cutting Required Product Overview The Stinger SFSAU01 is a vehicle-specific single DIN radio fascia kit designed to allow a clean, factory-finished aftermarket head unit installation in the Audi A4 and S4 (B6 and B7 chassis, 2001–2008). The SFSAU01 is shaped to match the factory dash recess on these vehicles exactly, so your new head unit sits flush and looks like it was always there. Important: this fascia kit is compatible with factory single DIN models only. If your A4 or S4 came from the factory with a double DIN head unit or the Audi Symphony/Concert multi-unit setup occupying a larger aperture, this kit will not be the correct fitment check your factory configuration before ordering. Key Specifications Manufacturer Part Number: SFSAU01 Radio DIN Size: Single DIN Finish / Colour: Not specified — confirm with supplier before listing Vehicle Compatibility: Audi A4 (incl. S4) B6/B7 — 2001 to 2008 Factory Configuration Required: Single DIN factory models only Features & Benefits Vehicle-specific fit: Engineered specifically for the Audi A4 and S4 (B6/B7 chassis), so there's no cutting, trimming, or gap-filling — the fascia drops into the factory single DIN recess cleanly. A4 and S4 coverage: One SKU covers both the standard A4 and the performance-oriented S4 across the full B6 and B7 production run, from 2001 through to 2008. Single DIN flexibility: Compatible with any standard single DIN aftermarket head unit, giving you a wide choice of brands, features, and price points when upgrading. Consistent interior finish: The fascia maintains the premium look of the Audi interior, keeping the upgrade looking factory rather than aftermarket. Clean cable management: The fascia frame creates a tidy surround that helps keep wiring organised behind the dash during installation. Technical Specs Specification Detail Part Number SFSAU01 DIN Size Single DIN Colour Not specified — confirm with supplier Compatible Chassis Audi B6, B7 Compatible Models Audi A4 (incl. S4) 2001–2008 Factory Config Required Single DIN factory models only Install Depth Not specified — verify head unit depth against dash cavity Weight Not specified Compatible With / Goes Well With Audi A4 (B6 chassis) — factory single DIN models, 2001 to 2005 Audi A4 (B7 chassis) — factory single DIN models, 2005 to 2008 Audi S4 (B6 chassis) — factory single DIN models, 2003 to 2005 Audi S4 (B7 chassis) — factory single DIN models, 2005 to 2008 Any standard Single DIN aftermarket head unit Frequently Asked Questions Does the SFSAU01 fit all Audi A4 models from 2001 to 2008? Only factory single DIN variants are compatible. If your A4 or S4 came with a double DIN or multi-unit factory head unit, this fascia will not fit correctly — check your factory radio configuration before purchasing. Does this kit fit the Audi S4? Yes — the SFSAU01 is confirmed for both the A4 and S4 across the B6 and B7 chassis (2001–2008), provided the vehicle left the factory with a single DIN head unit configuration. Do I need to buy anything else to complete the installation? You will need a vehicle-specific wiring harness adaptor and a steering wheel control adaptor if applicable. Confirm with F.A.E. whether a separate mounting cradle is also required for this fascia before ordering. Will this fascia fit a double DIN head unit? No — the SFSAU01 is a single DIN fascia kit only. It is also not suitable for vehicles that came with a double DIN factory setup, as the dash aperture dimensions will differ. Is the SFSAU01 covered under warranty? Stinger products sold through F.A.E. are covered under the manufacturer's warranty. Contact F.A.E. directly for warranty claims or fitment support after purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Single DIN Fitment for the Alfa Romeo 156 932 Silver Fascia Product Overview The Stinger SFSAR03 is a silver-finish single DIN radio fascia kit designed for installing an aftermarket single DIN head unit into the 2001–2007 Alfa Romeo 156 932. It provides a silver surround that frames the new head unit within the 156's factory dash opening without modification to the factory panel. Please note: mounting brackets are not included confirm your head unit's mounting requirements and source brackets separately before purchase. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFSAR03 Vehicle compatibility: Alfa Romeo 156 932 2001–2007 Head unit size: Single DIN Colour: Silver Mounting brackets: Not included Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Alfa Romeo 156 932 Specific Fit — Engineered for the 932-series 156's factory dash opening, delivering a precise, vehicle-specific result. Silver Finish — The silver fascia panel complements the Alfa Romeo 156's interior styling for a factory-compatible appearance after the head unit swap. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFSAR03 Brand Stinger Colour Silver Head Unit Size Single DIN Vehicle Compatibility Alfa Romeo 156 932 2001–2007 Mounting Brackets Not included Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Alfa Romeo 156 932 2001, 2002, 2003, 2004, 2005, 2006, 2007 Standard single DIN aftermarket head units Frequently Asked Questions Does the SFSAR03 include mounting brackets? No — mounting brackets are not included with the SFSAR03. Source appropriate mounting brackets separately before installation to secure the head unit within the fascia. Does the SFSAR03 include a wiring harness or head unit? No — the SFSAR03 is a fascia kit only. The head unit, wiring harness, mounting brackets, and antenna adaptor must all be sourced separately for a complete installation. What colour is the SFSAR03 fascia? The SFSAR03 has a silver finish. Will this fascia require any modification to the factory dash? No — the SFSAR03 is designed to fit the Alfa Romeo 156 932 factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFSAR03 suits standard single DIN aftermarket head units only. Double DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Single or Double DIN Fitment Across Three Volvo Models S60, V70 and XC70 Product Overview The Stinger SFMVL01 is a multi-DIN radio fascia kit designed for installing either a single DIN or double DIN aftermarket head unit into compatible Volvo S60, V70, and XC70 models. A single part number covers the Volvo S60 1st Generation (2001–2009), Volvo V70 2nd Generation (2004–2007), and Volvo XC70 2nd Generation (2003–2007), making it a practical choice for Volvo owners across these three popular models. This is a fascia kit only head unit, wiring harness, mounting brackets, and antenna adaptor are not included and must be sourced separately. Key Specifications Manufacturer Part Number: SFMVL01 Vehicle compatibility: Volvo S60 1st Gen 2001–2009; Volvo V70 2nd Gen 2004–2007; Volvo XC70 2nd Gen 2003–2007 Head unit size: Single DIN or Double DIN Colour: Not specified Mounting brackets: Not specified Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Covers S60, V70 and XC70 — A single fascia kit confirmed for three Volvo models across their respective production windows, covering a broad range of Volvo owners without needing separate part numbers. Single and Double DIN Compatible — Accommodates both single DIN and double DIN aftermarket head units in these Volvo models' factory dash openings. No Dash Modification Required — Designed to fit the factory dash openings directly without cutting or permanently modifying the factory panels. Technical Specs Specification Detail Part Number SFMVL01 Brand Stinger Colour Not specified Head Unit Size Single DIN or Double DIN Volvo S60 Compatibility 1st Generation 2001–2009 Volvo V70 Compatibility 2nd Generation 2004–2007 Volvo XC70 Compatibility 2nd Generation 2003–2007 Mounting Brackets Not specified Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Volvo S60 1st Generation 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Volvo V70 2nd Generation 2004, 2005, 2006, 2007 Volvo XC70 2nd Generation 2003, 2004, 2005, 2006, 2007 Single DIN and double DIN aftermarket head units Frequently Asked Questions Does the SFMVL01 include a wiring harness or mounting brackets? No — the SFMVL01 is a fascia kit only. The head unit, wiring harness, mounting brackets, and antenna adaptor must be sourced separately for a complete installation. Which Volvo models does this kit cover? The SFMVL01 covers the Volvo S60 1st Generation (2001–2009), Volvo V70 2nd Generation (2004–2007), and Volvo XC70 2nd Generation (2003–2007). Confirm your vehicle's generation and year before purchase. Can this fascia accept both single DIN and double DIN head units? Yes — the SFMVL01 accommodates both single DIN and double DIN aftermarket head units across all three compatible Volvo models. What colour is the SFMVL01 fascia? Colour is not specified in the supplier data. Confirm with the supplier before purchase if colour matching is a requirement. Will this fascia require any modification to the factory dash? No — the SFMVL01 is designed to fit the S60, V70, and XC70 factory dash openings without cutting or permanently modifying the dash panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Single DIN Fitment for the Iveco Daily 5th Gen Fascia With BKISOCT Cradle Required Product Overview The Stinger SFMIV01 is a single DIN radio fascia kit designed for installing an aftermarket single DIN head unit into the 2007–2014 Iveco Daily 5th Generation. It provides a surround that frames the new head unit within the Daily's factory dash opening without modification to the factory panel. Please note: the BKISOCT universal mounting cradle is required for installation and is sold separately. This fascia kit will not install correctly without the BKISOCT. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFMIV01 Vehicle compatibility: Iveco Daily 5th Gen 2007–2014 Head unit size: Single DIN Colour: Not specified Universal mounting cradle required: Yes — BKISOCT (sold separately) Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Iveco Daily 5th Gen Specific Fit — Engineered for the 5th Generation Daily's factory dash opening, delivering a vehicle-specific result without modification. Single DIN Compatibility — Accommodates standard single DIN aftermarket head units within the Daily's factory dash cavity. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFMIV01 Brand Stinger Colour Not specified Head Unit Size Single DIN Vehicle Compatibility Iveco Daily 5th Gen 2007–2014 Universal Cradle Required Yes — BKISOCT (sold separately) Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Iveco Daily 5th Generation 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Standard single DIN aftermarket head units Stinger BKISOCT Universal Mounting Cradle (sold separately — required) Frequently Asked Questions Does the SFMIV01 include the BKISOCT mounting cradle? No — the BKISOCT universal mounting cradle is sold separately and is required for installation. The SFMIV01 will not install correctly without it. What head unit size does this fascia suit? The SFMIV01 is designed for standard single DIN aftermarket head units only. Double DIN head units are not compatible with this fascia kit. Does the SFMIV01 include a wiring harness or head unit? No — the SFMIV01 is a fascia kit only. The head unit, wiring harness, BKISOCT cradle, and antenna adaptor must all be sourced separately. Will this fascia require any modification to the factory dash? No — the SFMIV01 is designed to fit the Iveco Daily 5th Gen factory dash opening without cutting or permanently modifying the dash panel. What colour is the SFMIV01 fascia? Colour is not specified in the supplier data. Confirm with the supplier before purchase if colour matching is a requirement. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SFMFI01 Double DIN Radio Fascia Kit for Fiat Ducato 2006–2012 (Third Gen) A vehicle-specific double DIN radio fascia kit for the Fiat Ducato Third Generation (2006–2012) black finish, no brackets required, but note that the BKISOCT cradle must be purchased separately for a complete 2DIN installation. Product Overview The Stinger SFMFI01 is a vehicle-specific double DIN radio fascia kit designed for the Fiat Ducato Third Generation (2006–2012). It provides the dash panel required to install an aftermarket 2DIN head unit into the factory radio opening. Please note: A cradle is required to complete the double DIN installation. The BKISOCT cradle is not included with the SFMFI01 and must be purchased separately. Do not order this fascia kit without also sourcing the BKISOCT, or the installation cannot be completed. Features & Benefits Vehicle-specific fit for Fiat Ducato Third Gen 2006–2012 Allows installation of aftermarket double DIN head units Black finish Uses factory mounting position — no brackets included or required Technical Specs Specification Detail SKU / Part Number SFMFI01 Brand Stinger Colour / Finish Black Radio Size Compatibility Double DIN (2DIN) Mounting Brackets Included No Required Accessory (not included) BKISOCT cradle — required for 2DIN installation Antenna Adaptor Included Not included Wiring Harness Included Not included SWC Interface Included Not included Compatible With / Goes Well With Direct Vehicle Fit: Fiat Ducato 2006–2012 (Third Generation) Goes Well With: BKISOCT cradle — required for 2DIN installation (sold separately) Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Vehicle-specific ISO wiring harness for Fiat Ducato Antenna adaptor for Fiat (if required by chosen head unit) Steering wheel control interface for Fiat Ducato (if applicable) Frequently Asked Questions Is the BKISOCT cradle included with this kit? No. The BKISOCT cradle is required to complete a double DIN installation with the SFMFI01 but is sold separately. Make sure to add it to your order — without it, the installation cannot be completed. What is the BKISOCT and why is it needed? The BKISOCT is a mounting cradle that secures your aftermarket 2DIN head unit within the fascia opening. The SFMFI01 fascia panel alone does not provide sufficient mounting to hold a 2DIN radio in place — the BKISOCT is the required companion part. Is a wiring harness included? No. The SFMFI01 is a fascia panel kit only. A vehicle-specific ISO wiring harness will need to be sourced separately to connect your aftermarket head unit to the factory wiring. Are mounting brackets included? No. The SFMFI01 does not include mounting brackets and uses the factory mounting position. No additional brackets are required. Is an antenna adaptor included? No. An antenna adaptor is not included. Depending on your aftermarket head unit's antenna connector type, an additional adaptor may be required and should be sourced separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Double DIN Fitment for the Suzuki Baleno EW Purpose-Built Fascia Product Overview The Stinger SFDSZ05 is a double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2016–2018 Suzuki Baleno EW. It provides a surround that frames the new head unit within the Baleno's factory dash opening without modification to the factory panel. This is a fascia kit only head unit, wiring harness, mounting brackets, and antenna adaptor are not included and must be sourced separately. Key Specifications Manufacturer Part Number: SFDSZ05 Vehicle compatibility: Suzuki Baleno EW 2016–2018 Head unit size: Double DIN Colour: Not specified Mounting brackets: Not specified Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Suzuki Baleno EW Specific Fit — Engineered for the EW-series Baleno's factory dash opening, delivering a precise, vehicle-specific result. Double DIN Compatibility — Accommodates standard double DIN aftermarket head units within the Baleno's factory dash cavity. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDSZ05 Brand Stinger Colour Not specified Head Unit Size Double DIN Vehicle Compatibility Suzuki Baleno EW 2016–2018 Mounting Brackets Not specified Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Suzuki Baleno EW 2016, 2017, 2018 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDSZ05 include a wiring harness or mounting brackets? No — the SFDSZ05 is a fascia kit only. The head unit, wiring harness, mounting brackets, and antenna adaptor must be sourced separately for a complete installation. What chassis code does this kit suit? The SFDSZ05 is confirmed for the Suzuki Baleno EW series from 2016 to 2018. Confirm your vehicle's chassis code and year before purchase. What colour is the SFDSZ05 fascia? Colour is not specified in the supplier data. Confirm with the supplier before purchase if colour matching is a requirement. Will this fascia require any modification to the factory dash? No — the SFDSZ05 is designed to fit the Suzuki Baleno EW factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFDSZ05 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Double DIN Fitment for the Suzuki Vitara LY Gloss Black Fascia Product Overview The Stinger SFDSZ04 is a gloss black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2015–2016 Suzuki Vitara LY. It provides a gloss black surround that frames the new head unit within the Vitara's factory dash opening without modification to the factory panel. This is a fascia kit only head unit, wiring harness, mounting brackets, and antenna adaptor are not included and must be sourced separately. Key Specifications Manufacturer Part Number: SFDSZ04 Vehicle compatibility: Suzuki Vitara LY 2015–2016 Head unit size: Double DIN Colour: Gloss black Mounting brackets: Not specified Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Suzuki Vitara LY Specific Fit — Engineered for the LY-series Vitara's factory dash opening, delivering a precise, vehicle-specific result. Gloss Black Finish — The gloss black fascia panel suits the Vitara LY's interior aesthetic, providing a premium finish around the aftermarket head unit. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDSZ04 Brand Stinger Colour Gloss Black Head Unit Size Double DIN Vehicle Compatibility Suzuki Vitara LY 2015–2016 Mounting Brackets Not specified Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Suzuki Vitara LY 2015, 2016 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDSZ04 include a wiring harness or mounting brackets? No — the SFDSZ04 is a fascia kit only. The head unit, wiring harness, mounting brackets, and antenna adaptor must be sourced separately for a complete installation. What colour is the SFDSZ04 fascia? The SFDSZ04 has a gloss black finish, distinct from a standard matte black finish. What chassis code does this kit suit? The SFDSZ04 is confirmed for the Suzuki Vitara LY series from 2015 to 2016. Confirm your vehicle's chassis code and year before purchase. Will this fascia require any modification to the factory dash? No — the SFDSZ04 is designed to fit the Suzuki Vitara LY factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFDSZ04 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Double DIN Fitment for the Suzuki Kizashi FR Black Fascia, Factory Bracket Modification or BKDDCT Cradle Required Product Overview The Stinger SFDSZ01 is a black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2010–2014 Suzuki Kizashi FR. It provides a black-finish surround that frames the new head unit within the Kizashi's factory dash opening without modification to the factory panel. Mounting brackets are not included. To secure the head unit, either the factory mounting brackets must be modified for use with this fascia, or the Stinger BKDDCT universal mounting cradle (sold separately) can be used as an alternative mounting solution. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFDSZ01 Vehicle compatibility: Suzuki Kizashi FR 2010–2014 Head unit size: Double DIN Colour: Black Mounting brackets: Not included — modify factory brackets or use BKDDCT mounting cradle (sold separately) Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Suzuki Kizashi FR Specific Fit — Engineered for the FR-series Kizashi's factory dash opening, delivering a vehicle-specific result without modification to the factory panel. Black Finish — The black fascia panel integrates with the Kizashi's interior trim for a clean, factory-compatible appearance after the head unit swap. Flexible Mounting Options — Where factory brackets are available, they can be modified for use with this fascia. Alternatively, the BKDDCT universal mounting cradle (sold separately) provides a ready-made mounting solution. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDSZ01 Brand Stinger Colour Black Head Unit Size Double DIN Vehicle Compatibility Suzuki Kizashi FR 2010–2014 Mounting Brackets Not included — modify factory brackets or use BKDDCT (sold separately) Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Suzuki Kizashi FR 2010, 2011, 2012, 2013, 2014 Standard double DIN aftermarket head units Stinger BKDDCT Universal Mounting Cradle (sold separately — optional mounting solution) Frequently Asked Questions Does the SFDSZ01 include mounting brackets? No — mounting brackets are not included. The factory Kizashi brackets can be modified for use with this fascia, or the Stinger BKDDCT universal mounting cradle (sold separately) can be used as an alternative. What is the BKDDCT and do I need it? The BKDDCT is a universal mounting cradle sold separately by Stinger. It is an alternative mounting solution for this installation where modifying the factory brackets is not preferred. Confirm with the supplier whether the BKDDCT is the right choice for your specific installation. Does the SFDSZ01 include a wiring harness or head unit? No — the SFDSZ01 is a fascia kit only. The head unit, wiring harness, and antenna adaptor must be sourced separately for a complete installation. Will this fascia require any modification to the factory dash? No — the SFDSZ01 is designed to fit the Suzuki Kizashi FR factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFDSZ01 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean Double DIN Fitment for the SsangYong Rexton Y285 Black Fascia, Brackets Included Product Overview The Stinger SFDSY02 is a black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2011–2015 SsangYong Rexton Y285. The kit includes mounting brackets and a no-universal-cradle-required design, providing a direct, vehicle-specific fitment result. It frames the new head unit cleanly within the Rexton's factory dash opening without modification. This is a fascia and bracket kit only head unit, wiring harness, and antenna adaptor are not included and must be sourced separately. Key Specifications Manufacturer Part Number: SFDSY02 Vehicle compatibility: SsangYong Rexton Y285 2011–2015 Head unit size: Double DIN Colour: Black Mounting brackets: Included Universal mounting cradle required: No Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits SsangYong Rexton Y285 Specific Fit — Engineered specifically for the Y285 Rexton's factory dash opening, delivering a precise, rattle-free fit. Mounting Brackets Included — All mounting brackets are supplied, providing the hardware needed to secure the head unit within the fascia and dash cavity. No Universal Cradle Required — The SFDSY02 is a direct-fit solution — no universal mounting cradle is needed, simplifying the installation process. Black Finish — The black fascia panel integrates with the Rexton's interior trim for a clean, factory-compatible appearance after the head unit swap. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDSY02 Brand Stinger Colour Black Head Unit Size Double DIN Vehicle Compatibility SsangYong Rexton Y285 2011–2015 Mounting Brackets Included Universal Cradle Required No Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With SsangYong Rexton Y285 2011, 2012, 2013, 2014, 2015 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDSY02 include a wiring harness or head unit? No — the SFDSY02 is a fascia and mounting bracket kit only. The head unit, wiring harness, and antenna adaptor must be sourced separately for a complete installation. Does this kit include mounting brackets? Yes — mounting brackets are included with the SFDSY02, providing the hardware needed to secure the aftermarket head unit within the fascia and dash cavity. Does this kit require a universal mounting cradle? No — the SFDSY02 is a direct-fit vehicle-specific kit and does not require a separate universal mounting cradle. Will this fascia kit require any modification to the factory dash? No — the SFDSY02 is designed to fit the SsangYong Rexton Y285 factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFDSY02 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean Double DIN Fitment for the SsangYong Korando C200 Black Fascia, Brackets Included Product Overview The Stinger SFDSY01 is a black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 2011–2012 SsangYong Korando C200. The kit includes mounting brackets and a no-universal-cradle-required design, providing a direct, vehicle-specific fitment result without generic adaptors. It frames the new head unit cleanly within the Korando's factory dash opening without modification. This is a fascia and bracket kit only head unit, wiring harness, and antenna adaptor are not included and must be sourced separately. Key Specifications Manufacturer Part Number: SFDSY01 Vehicle compatibility: SsangYong Korando C200 2011–2012 Head unit size: Double DIN Colour: Black Mounting brackets: Included Universal mounting cradle required: No Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits SsangYong Korando C200 Specific Fit — Engineered specifically for the C200 Korando's factory dash opening, delivering a precise, rattle-free fit without generic adaptors. Mounting Brackets Included — All mounting brackets are supplied, providing the hardware needed to secure the head unit within the fascia and dash cavity. No Universal Cradle Required — The SFDSY01 is a direct-fit solution — no universal mounting cradle is needed, simplifying the installation process. Black Finish — The black fascia panel integrates with the Korando's interior trim for a clean, factory-compatible appearance after the head unit swap. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDSY01 Brand Stinger Colour Black Head Unit Size Double DIN Vehicle Compatibility SsangYong Korando C200 2011–2012 Mounting Brackets Included Universal Cradle Required No Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With SsangYong Korando C200 2011, 2012 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDSY01 include a wiring harness or head unit? No — the SFDSY01 is a fascia and mounting bracket kit only. The head unit, wiring harness, and antenna adaptor must be sourced separately for a complete installation. Does this kit include mounting brackets? Yes — mounting brackets are included with the SFDSY01, providing the hardware needed to secure the aftermarket head unit within the fascia and dash cavity. Does this kit require a universal mounting cradle? No — the SFDSY01 is a direct-fit vehicle-specific kit and does not require a separate universal mounting cradle. Will this fascia kit require any modification to the factory dash? No — the SFDSY01 is designed to fit the SsangYong Korando C200's factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFDSY01 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Clean Double DIN Fitment for Your Skoda Octavia and Yeti Covered in One Kit Product Overview The Stinger SFDSK02 is a double DIN radio fascia kit designed to allow installation of an aftermarket double DIN head unit into compatible Skoda Octavia and Yeti models. The kit includes mounting brackets and provides a clean, black-finish surround that frames the new head unit within the factory dash opening. Compatible vehicles are the Skoda Octavia 1Z series (2009–2012, non-navigation models only) and the Skoda Yeti 5L series (2009–2019). Please note: the Octavia compatibility is restricted to non-navigation models navigation-equipped Octavia 1Z variants are not supported. No head unit is included. Key Specifications Manufacturer Part Number: SFDSK02 Compatible with: Skoda Octavia 1Z 2009–2012 (non-navigation only); Skoda Yeti 5L 2009–2019 Head unit size: Double DIN Mounting brackets: Included Colour: Black Head unit: Not included Antenna adaptor: Not specified Wiring harness: Not included Features & Benefits Double DIN Flush Fit Fascia — Provides a clean, purpose-built surround for an aftermarket double DIN head unit within the Skoda Octavia and Yeti's factory dash opening, delivering a factory-finish result without modification. Mounting Brackets Included — Mounting brackets are supplied with the kit, providing the hardware needed to secure the head unit within the fascia and dash cavity. Broad Yeti Coverage — Compatible across the full Skoda Yeti 5L production run from 2009 to 2019, making it a suitable fit for the majority of Yeti models on Australian roads. Black Finish — The fascia is finished in black to blend cleanly with the Octavia and Yeti's interior trim. Technical Specs Specification Detail Part Number SFDSK02 Brand Stinger Colour Black Head Unit Size Double DIN Mounting Brackets Included Skoda Octavia Compatibility 1Z series 2009–2012 — non-navigation models only Skoda Yeti Compatibility 5L series 2009–2019 Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Skoda Octavia 1Z 2009, 2010, 2011, 2012 — non-navigation models only Skoda Yeti 5L 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDSK02 include a head unit or wiring harness? No — the SFDSK02 is a fascia kit only. The head unit, wiring harness, and antenna adaptor are not included and will need to be sourced separately for a complete installation. Is this kit compatible with navigation-equipped Skoda Octavia models? No — the SFDSK02 is compatible with non-navigation Skoda Octavia 1Z models (2009–2012) only. Factory navigation-equipped Octavia variants are not supported. Does the kit include mounting brackets? Yes — mounting brackets are included with the SFDSK02, providing the hardware needed to secure an aftermarket double DIN head unit within the fascia and dash cavity. Is the SFDSK02 compatible with all Skoda Yeti models? The kit suits the Skoda Yeti 5L series across its full production run from 2009 to 2019. If you are unsure whether your Yeti is a 5L variant, confirm the chassis code with your vehicle documentation or contact F.A.E. before purchase. What size head unit does this fascia kit suit? The SFDSK02 is designed for standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Double DIN Fitment for the Rover 75 Black Fascia, No Brackets Included Product Overview The Stinger SFDRO01 is a black double DIN radio fascia kit designed for installing an aftermarket double DIN head unit into the 1999–2011 Rover 75. It provides a black-finish surround that frames the new head unit within the Rover 75's factory dash opening without modification to the factory panel. Please note: mounting brackets are not included with this kit confirm your head unit's mounting requirements and source brackets separately before purchase. No head unit, wiring harness, or antenna adaptor is included. Key Specifications Manufacturer Part Number: SFDRO01 Vehicle compatibility: Rover 75 1999–2011 Head unit size: Double DIN Colour: Black Mounting brackets: Not included Head unit: Not included Wiring harness: Not included Antenna adaptor: Not specified Features & Benefits Rover 75 Specific Fit — Engineered for the Rover 75's factory dash opening, delivering a vehicle-specific result without modification to the factory panel. Black Finish — The black fascia panel integrates with the Rover 75's interior trim for a clean, factory-compatible appearance after the head unit swap. No Dash Modification Required — Designed to fit the factory dash opening directly without cutting or permanently modifying the factory panel. Technical Specs Specification Detail Part Number SFDRO01 Brand Stinger Colour Black Head Unit Size Double DIN Vehicle Compatibility Rover 75 1999–2011 Mounting Brackets Not included Wiring Harness Not included Antenna Adaptor Not specified Head Unit Not included Compatible With / Goes Well With Rover 75 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Standard double DIN aftermarket head units Frequently Asked Questions Does the SFDRO01 include mounting brackets? No — mounting brackets are not included with the SFDRO01. Source appropriate mounting brackets separately before installation to secure the head unit within the fascia. Does the SFDRO01 include a wiring harness or head unit? No — the SFDRO01 is a fascia kit only. The head unit, wiring harness, mounting brackets, and antenna adaptor must all be sourced separately for a complete installation. What colour is the SFDRO01 fascia? The SFDRO01 has a black finish. Will this fascia require any modification to the factory dash? No — the SFDRO01 is designed to fit the Rover 75 factory dash opening without cutting or permanently modifying the dash panel. What size head unit does this fascia suit? The SFDRO01 suits standard double DIN aftermarket head units. Single DIN head units are not compatible with this fascia kit. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less