Stinger SI4212 4000 Series 2-Channel RCA Interconnect, 3.6m Audiophile-grade 2-channel OFC RCA interconnect from the Stinger 4000 Series C3 Tech, split-tip connectors, directional twisted-pair construction. 3.6 metres for compact vehicle installations. Product Overview The Stinger SI4212 is the 3.6-metre (approximately 12ft) 2-channel version of the 4000 Series RCA interconnect range. It shares the same construction quality as the SI429 (5m) and SI4220 (6m) OFC conductors, C3 Tech, directional twisted-pair shielding, and split-tip connectors in a shorter 3.6-metre length suited to compact cars, hatchbacks, and installations where the amplifier is mounted close to the head unit. Features & Benefits 2-channel OFC RCA — suited to stereo or mono amplifier connections C3 Tech (Continuous Connection Construction) for unmatched signal transfer Split-tip connectors for superior contact and signal transfer Directional twisted-pair construction — interference rejection Compact connector ends with colour-coded channel identification 3.6-metre length — suited to compact vehicles and short cable runs Technical Specs Specification Detail SKU / Part Number SI4212 Brand Stinger Series 4000 Series Channels 2-channel Length 3.6m (approx. 12ft) Conductor Type OFC (Oxygen-Free Copper) Connector Split-tip Construction Directional twisted-pair Signal Technology C3 Tech (Continuous Connection Construction) Jacket Clear flexible PVC, colour-coded Compatible With / Goes Well With Direct Vehicle Fit: Universal — compatible with any car audio component with standard RCA inputs/outputs Goes Well With: Stinger SK4241 / SK4281 4000 Series amplifier wiring kits 2-channel or mono car audio amplifiers in compact installations Stinger 4000 Series speaker wire Stinger SI4217 / SI429 / SI4220 (longer 4000 Series RCA options for larger vehicles) Frequently Asked Questions When would I choose the SI4212 over the longer 4000 Series RCA cables? The SI4212 at 3.6m suits compact cars and hatchbacks where the amplifier is in the boot close to the rear seats — a typical run of 3–4 metres. Choosing a cable matched to the actual run length avoids excess cable bundling and the associated noise risk. For standard sedans (5m) or larger vehicles (6m), see the SI429 or SI4220. What is C3 Tech? C3 Tech (Continuous Connection Construction) is Stinger's proprietary method ensuring the conductor maintains continuous contact with the connector — reducing resistance and improving signal consistency throughout the cable. Is the SI4212 directional? Yes. The SI4212 uses directional twisted-pair construction and should be installed with signal flowing from the head unit to the amplifier for optimal noise rejection. Can I use the SI4212 for a subwoofer (mono) connection? Yes. One channel of the 2-channel cable can be used for a mono subwoofer connection where the amplifier supports a dedicated mono input. What if 3.6m is too short for my vehicle? For longer cable runs, see the Stinger SI429 (5m), SI4217 (5m), or SI4220 (6m) — all from the same 4000 Series range with identical construction quality. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SFDIZ01 Double DIN Radio Fascia Kit for Holden Colorado RG (incl. Colorado 7) 2012–2016 A vehicle-specific double DIN fascia kit for the Holden Colorado RG and Colorado 7 charcoal finish with mounting brackets included for a clean 2DIN head unit installation. Product Overview The Stinger SFDIZ01 is a vehicle-specific double DIN radio fascia kit designed for the Holden Colorado RG series (including Colorado 7, 2012–2016). It provides the dash framework and mounting brackets required to install an aftermarket 2DIN head unit into the factory radio opening cleanly and securely. The charcoal finish is matched to the Colorado RG interior trim for a factory-integrated appearance. Features & Benefits Vehicle-specific fit for Holden Colorado RG (incl. Colorado 7) 2012–2016 Allows installation of aftermarket double DIN head units Mounting brackets included Charcoal finish matched to factory interior trim Technical Specs Specification Detail SKU / Part Number SFDIZ01 Brand Stinger Colour / Finish Charcoal Radio Size Compatibility Double DIN (2DIN) Mounting Brackets Included Yes Antenna Adaptor Included Not included Wiring Harness Included Not included SWC Interface Included Not included Compatible With / Goes Well With Direct Vehicle Fit: Holden Colorado (incl. Colorado 7) 2012–2013 (RG) Holden Colorado (incl. Colorado 7) 2014–2016 (RG) Goes Well With: Aftermarket double DIN head units (Pioneer, Kenwood, Sony, JVC) Stinger HRIZ001 radio replacement kit (for Colorado RG with basic OE CD head unit) Vehicle-specific ISO wiring harness for Holden Colorado RG Antenna adaptor for Holden/Isuzu (if required by chosen head unit) Steering wheel control interface for Holden Colorado RG (if applicable) Frequently Asked Questions Does this kit fit the Holden Colorado 7? Yes. The SFDIZ01 is confirmed compatible with both the Holden Colorado and Colorado 7 RG series (2012–2016). Is a wiring harness included? No. The SFDIZ01 is a fascia and bracket kit only. A vehicle-specific ISO wiring harness will need to be sourced separately to connect your aftermarket head unit to the factory wiring. Does this kit include a steering wheel control interface? No. A SWC interface is not included. If you want to retain factory steering wheel audio controls, a compatible SWC adaptor will need to be purchased separately. Are mounting brackets included? Yes. The SFDIZ01 includes mounting brackets for securing the aftermarket head unit in the factory dash opening. Is an antenna adaptor included? No. An antenna adaptor is not included. Depending on your aftermarket head unit's antenna connector type, an additional adaptor may be required and should be sourced separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Full Offline Navigation for Your HEIGH10 or ELEV8 No Phone Data, No Surprises Product Overview The Stinger SE-PAUNZ is an iGo Australian and New Zealand mapping MicroSD card that adds full GPS navigation capability to the Stinger HEIGH10 (UN1810) and ELEV8 (UN1880) infotainment systems without relying on mobile phone data. Insert the card into the built-in MicroSD slot and access comprehensive offline turn-by-turn navigation, point of interest search, lane guidance, 3D imagery, and historical traffic-aware routing entirely from the infotainment screen. Designed for HEIGH10 and ELEV8 systems only not compatible with other infotainment brands or models. Key Specifications Manufacturer Part Number: SE-PAUNZ Function: iGo navigation MicroSD card — offline AU/NZ mapping Compatible products: Stinger HEIGH10 UN1810, Stinger ELEV8 UN1880 Map coverage: Australia and New Zealand — current mapping Connection: MicroSD card Phone data required: No — fully offline capable POI search: Yes — cafés, restaurants, fuel, accommodation, parking, museums, bars and more 3D imagery: Yes — landmarks, city models, lanes, tunnels, complex junctions Lane guidance: Yes Route recalculation: Yes — instant rerouting on missed turns Historical traffic data: Yes — considered in route calculation Quantity: 1x MicroSD card Features & Benefits Full Offline Navigation — No Mobile Data Required — The iGo mapping card provides complete turn-by-turn navigation using offline maps, removing dependency on mobile reception — critical for remote areas, outback travel, and any route where mobile coverage is unreliable. Current Australian and New Zealand Mapping — Includes up-to-date AU/NZ maps at the time of purchase, covering the full road network across both countries. Historical Traffic-Aware Routing — iGo considers historical traffic data when calculating routes, helping avoid predictable congestion even without a live data connection. Comprehensive POI Search — Search thousands of points of interest including fuel stations, restaurants, cafés, accommodation, parking, and more — searchable along the route and at the destination. 3D Imagery and Lane Guidance — 3D landmarks, city models, and accurate lane, tunnel, and junction depictions help drivers navigate complex environments with confidence. Precise lane-level guidance ensures the correct positioning at junctions and motorway exits. Instant Route Recalculation — Missed a turn? iGo immediately recalculates the route and provides updated guidance without the need to interact with the screen. Simple MicroSD Installation — Insert the card into the HEIGH10 or ELEV8's built-in MicroSD slot — no software installation or pairing required. Technical Specs Specification Detail Part Number SE-PAUNZ Brand Stinger Function iGo offline navigation MicroSD Map Coverage Australia and New Zealand Compatible Products Stinger HEIGH10 UN1810, Stinger ELEV8 UN1880 Connection MicroSD card Offline Capable Yes — no mobile data required POI Search Yes — extensive category list 3D Imagery Yes — landmarks, city models, junctions Lane Guidance Yes Historical Traffic Yes — considered in route calculation Route Recalculation Yes — instant on missed turn Quantity 1x MicroSD card Compatible With / Goes Well With Stinger HEIGH10 UN1810 infotainment system Stinger ELEV8 UN1880 infotainment system Caution: The SE-PAUNZ is compatible with Stinger HEIGH10 and ELEV8 infotainment systems only. It is not compatible with other infotainment brands or models. Confirm your unit's MicroSD slot is the correct interface before purchase. Frequently Asked Questions Does the SE-PAUNZ require a mobile data connection to work? No — the SE-PAUNZ provides fully offline navigation. Maps are stored on the MicroSD card and do not require mobile data or internet connectivity, making it suitable for remote and outback travel. Which Stinger infotainment systems is the SE-PAUNZ compatible with? The SE-PAUNZ is confirmed compatible with the Stinger HEIGH10 (UN1810) and ELEV8 (UN1880) only. It is not compatible with other infotainment brands or models. Does the SE-PAUNZ cover New Zealand as well as Australia? Yes — the card includes current mapping for both Australia and New Zealand. How is the SE-PAUNZ installed? Insert the MicroSD card into the built-in MicroSD slot on the HEIGH10 or ELEV8. No software installation or pairing is required. Can maps be updated after purchase? iGo maps can typically be updated via a naviextras.com account. Confirm the update process and availability for this specific card with the supplier before purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Keep Your Golf MK7's Factory Reverse Camera After a Head Unit Upgrade Product Overview The Stinger SCVWRT2 is a reverse camera retention adaptor designed to maintain the factory OEM reverse camera when installing a compatible aftermarket head unit in the Volkswagen Golf MK7 5G series (2014–2018), including the GTI variant. It passes the factory camera signal through to the new head unit, preserving reverse camera functionality without additional camera wiring. Please note: in some installations, video noise or lines may appear in the camera image. Stinger recommends the PACRPA-VA1 video noise filter (sold separately) to reduce or eliminate this where it occurs. Key Specifications Manufacturer Part Number: SCVWRT2 Function: Factory reverse camera retention Reverse camera retention: Yes — included with interface Compatible vehicles: Volkswagen Golf MK7 5G 2014–2018 (including GTI) Video noise risk: Possible in some installations — PACRPA-VA1 recommended (sold separately) Plug & Play: Yes Features & Benefits OEM Reverse Camera Retained — The SCVWRT2 passes the factory camera signal to a compatible aftermarket head unit, maintaining reverse camera functionality without installing a new camera or running new wiring. Includes GTI — Confirmed compatible with the Volkswagen Golf MK7 5G including GTI variants across the 2014–2018 production run. Plug & Play — Connects to the factory camera harness without splicing or soldering. Video Noise Solution Available — Where video noise or lines appear in the camera image, the Stinger PACRPA-VA1 video noise filter (sold separately) is the recommended remedy. Technical Specs Specification Detail Part Number SCVWRT2 Brand Stinger Function Reverse camera retention Vehicle Compatibility VW Golf MK7 5G 2014–2018 (incl. GTI) Reverse Camera Retention Yes — included with interface Video Noise Risk Possible in some installations Recommended Accessory PACRPA-VA1 video noise filter (sold separately) Plug & Play Yes Compatible With / Goes Well With Volkswagen Golf MK7 5G 2014, 2015, 2016, 2017, 2018 (including GTI) Compatible aftermarket head units with RCA reverse camera input Stinger SFDVW01 Double DIN Gloss Black Fascia Kit (sold separately) Stinger USBRT-VW01 AUX/USB Retention Adaptor (sold separately) Caution: In some installations, video noise or lines may appear in the camera image — this is a known condition when retaining factory cameras with aftermarket head units. The Stinger PACRPA-VA1 video noise filter (sold separately) is recommended to resolve this where it occurs. Always verify compatibility with your specific Golf MK7 variant before installation. MK7.5 facelift (2017–2018) coverage should be confirmed with the supplier before publishing if camera wiring changed between facelifts. Frequently Asked Questions What does the SCVWRT2 do? The SCVWRT2 retains the factory OEM reverse camera when an aftermarket head unit is installed in the Volkswagen Golf MK7, passing the factory camera signal to the new head unit without additional wiring. Is this adaptor compatible with the VW Golf GTI? Yes — the SCVWRT2 is confirmed compatible with the Volkswagen Golf MK7 5G series including GTI variants from 2014 to 2018. What should I do if I get video noise or lines in my reverse camera image? Stinger recommends the PACRPA-VA1 video noise filter, sold separately, to reduce or eliminate video noise or lines that may appear when retaining a factory reverse camera with an aftermarket head unit. Does this adaptor require any wiring modifications? No — the SCVWRT2 is plug-and-play, connecting directly to the factory camera harness and the aftermarket head unit's RCA reverse camera input without splicing or soldering. Is the SCVWRT2 compatible with other Volkswagen models? Compatibility is confirmed for the Volkswagen Golf MK7 5G 2014–2018 only. For other Volkswagen models, confirm compatibility with the supplier before purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SCVWRT1 Reverse Camera Retention Adaptor for Volkswagen, Audi & Skoda Vehicles Keep your factory reverse camera working when upgrading to an aftermarket head unit plug-and-play adaptor for low-resolution RGBS factory cameras in select Volkswagen, Audi, and Skoda vehicles. Product Overview The Stinger SCVWRT1 is a reverse camera retention adaptor for select Volkswagen (and compatible Audi/Skoda) vehicles, allowing the factory reverse camera to remain operational with an aftermarket head unit. Critical compatibility note: The SCVWRT1 is only compatible with low-resolution factory cameras using the RGBS video format. It is not compatible with high-resolution factory cameras, which typically have a separate hideaway module and display moving dynamic guidelines in reverse. If your vehicle's reverse camera shows animated/moving guidelines, it is a high-resolution camera and this adaptor will not work with it. Video noise or lines may occur in some installations when retaining a factory camera with an aftermarket head unit. If this occurs, the PACRPA-VA1 video noise filter (sold separately) is recommended to reduce or eliminate the interference. Features & Benefits Retains factory OEM reverse camera with aftermarket infotainment systems Plug & play — no cutting or splicing required Compatible with low-resolution RGBS factory cameras Covers Volkswagen, and compatible Audi and Skoda vehicles Technical Specs Specification Detail SKU / Part Number SCVWRT1 Brand Stinger Plug & Play Yes Camera Retention Reverse camera only Compatible Camera Type Low-resolution factory camera (RGBS format) only Not Compatible With High-resolution factory cameras with separate hideaway module or moving guidelines Video Noise Note PACRPA-VA1 noise filter (sold separately) may be required Compatible With / Goes Well With Direct Vehicle Fit: Volkswagen Amarok 2011–2015 (2H Series) Volkswagen Caddy 2005–2015 (2K Series) Volkswagen EOS 2005–2013 (1F) Volkswagen Golf (incl. GTI) 2005–2013 (Mk5/Mk6 — 5K Series) Volkswagen Jetta 2005–2015 (A5/A6 Series) Volkswagen Passat 2005–2014 (B6/B7 Series) Volkswagen Polo 2010–2014 (6R Series) Volkswagen Scirocco 2008–2014 (3rd Generation) Volkswagen Tiguan 2007–2016 (5N Series) Volkswagen Transporter (incl. Multivan / Caravelle) 2010–2015 (T5 Series) Goes Well With: Aftermarket double DIN head units with reverse camera RCA input PACRPA-VA1 video noise filter (recommended if video noise is present — sold separately) Vehicle-specific ISO wiring harness for Volkswagen Frequently Asked Questions How do I know if my VW has a high-res or low-res factory camera? The easiest way to tell is whether your factory reverse camera displays moving dynamic guidelines — the animated lines that follow your steering input. If your camera shows moving guidelines, it is a high-resolution camera with a separate hideaway module, and the SCVWRT1 is not compatible. Static or no guidelines typically indicate a low-resolution RGBS camera, which this adaptor supports. What is the PACRPA-VA1 and when do I need it? The PACRPA-VA1 is a video noise filter sold separately. In some installations, retaining a factory camera with an aftermarket head unit can introduce video noise or horizontal lines in the camera feed. If this occurs after installing the SCVWRT1, adding the PACRPA-VA1 to the camera loop will typically reduce or eliminate the interference. Does this adaptor work with Audi and Skoda vehicles? Yes. The supplier notes that the SCVWRT1 is compatible with select Audi and Skoda vehicles that share the same VW Group camera connector and RGBS camera format, though these models are not individually listed. Contact the F.A.E. team to confirm compatibility for your specific Audi or Skoda model before purchasing. Is any cutting or splicing required for installation? No. The SCVWRT1 is a plug-and-play adaptor that connects to the factory camera wiring without cutting or modifying the factory harness. Will this adaptor work with any aftermarket head unit? The SCVWRT1 outputs the factory camera signal for use with aftermarket head units. Compatibility depends on your head unit having a reverse camera RCA input. Confirm your head unit's camera input type with the F.A.E. team if unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SCNIRT1 Plug & Play Reverse Camera Retention Harness for Nissan 22-Pin Vehicles Keep your factory Nissan reverse camera fully operational when upgrading to an aftermarket infotainment system plug-and-play 22-pin harness, no cutting required. Product Overview The Stinger SCNIRT1 is a plug-and-play reverse camera retention harness designed for Nissan vehicles equipped with a 22-pin camera connector at the OEM radio. It allows the factory reverse camera to be retained and used with an aftermarket infotainment system, without cutting or modifying the factory wiring. Compatible with the Nissan Dualis J10, Navara D22/D40, Pathfinder R51, and X-Trail T31 all models that share the 22-pin Nissan camera connector. Please note: The vehicle must have the OEM 22-pin camera connector fitted. Before installation, check the OEM camera power voltage to ensure compatibility with the retention harness. Stinger Australia is not liable for damage to factory cameras if incorrect voltage is applied. Features & Benefits Retains factory OEM reverse camera with aftermarket infotainment systems Plug & play — 22-pin Nissan factory connector, no cutting or splicing Reverse camera retention only — no front or side camera support Compatible across multiple Nissan models with 22-pin camera connector Technical Specs Specification Detail SKU / Part Number SCNIRT1 Brand Stinger Plug & Play Yes Vehicle Plug Style 22-Pin Nissan Connector Camera Retention Reverse camera only Prerequisite Vehicle must have OEM 22-pin camera connector Voltage Check Required Yes — confirm OEM camera power voltage before installation Liability Note Stinger Australia not liable for camera damage from incorrect voltage What's in the Box Vehicle Harness Compatible With / Goes Well With Direct Vehicle Fit: Nissan Dualis 2007–2013 (J10) Nissan Navara 2005–2015 (D22/D40) Nissan Pathfinder 2005–2013 (R51) Nissan X-Trail 2007–2013 (T31) Goes Well With: Aftermarket double DIN head units with reverse camera input Stinger radio replacement kits for compatible Nissan models Aftermarket infotainment systems with RCA camera input Frequently Asked Questions How do I know if my Nissan has the 22-pin camera connector? The SCNIRT1 is designed for Nissan vehicles with a 22-pin camera connector at the OEM radio. The compatible models are the Dualis J10, Navara D22/D40, Pathfinder R51, and X-Trail T31. If you are unsure whether your specific variant has this connector, contact the F.A.E. team to confirm before purchasing. Why do I need to check the OEM camera power voltage? Different Nissan models and variants may supply different voltage levels to the factory camera. If the wrong voltage is applied through the retention harness, it can damage the factory camera. Always verify the OEM camera power voltage before completing the installation — Stinger Australia is not liable for camera damage resulting from incorrect voltage application. Does this harness retain front or side cameras? No. The SCNIRT1 retains the reverse (rear) camera only. Front and side cameras, if fitted, are not supported by this harness. Is any cutting or splicing required for installation? No. The SCNIRT1 is a plug-and-play harness that connects directly to the 22-pin Nissan factory camera connector. No cutting or modification of the factory wiring is required. Will this harness work with any aftermarket head unit? The SCNIRT1 outputs the factory camera signal for use with aftermarket infotainment systems. Compatibility depends on your chosen head unit having a reverse camera input (typically RCA). Confirm your head unit's camera input type with the F.A.E. team if unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger RKX4 Roadkill Expert Sound Damping Kit, 4 Sq Ft (2-Pack) An entry-level Roadkill Expert pack two sheets of proprietary butyl and aluminium sound damping material totalling 4 sq ft. Ideal for treating a single door, targeted panel areas, or as a trial pack before committing to a full vehicle installation. Product Overview The Stinger RKX4 is a 2-pack of Roadkill Expert sound damping material two sheets at 12" × 24" (approx. 30cm × 61cm each) for a total of 4 sq ft. It uses the same Roadkill Expert specification as the larger RKX36B bulk kit proprietary ultra-dense butyl blend bottom layer for acoustic energy absorption and a 6 mil aluminium top layer for heat dissipation and structural integrity. Suitable for a single door inner skin, a targeted floor or boot section, or a trial installation to evaluate Roadkill Expert's performance before purchasing a larger pack. Self-adhesive, odourless, and non-toxic. Features & Benefits 2 sheets of Roadkill Expert, 4 sq ft total coverage Proprietary ultra-dense butyl blend — absorbs acoustic energy, kills panel resonance 6 mil aluminium outer layer — heat dissipation and structural integrity Self-adhesive — peel, press, and roll to apply Odourless and non-toxic Reduces door panel vibrations, squeaks, and rattles Improves speaker bass response and audio output Reduces road noise and improves cabin temperature regulation Application temperature range: –62°C to 149°C Technical Specs Specification Detail SKU / Part Number RKX4 Brand Stinger Series Roadkill Expert Coverage 4 sq ft — 2 sheets at 12" × 24" (approx. 30cm × 61cm each) Minimum Thickness 2.0mm (0.080 in) Aluminium Layer 6 mil Damping Weight 0.65 lbs/ft² Peel Adhesion Strength 40.89 lbs/in after 24 hours Application Temperature –62°C to 149°C (–80°F to 300°F) Adhesive Self-adhesive butyl layer Odour Odourless Toxicity Non-toxic Compatible With / Goes Well With Direct Vehicle Fit: Universal — suitable for any vehicle metal panel surface Goes Well With: Stinger RKX36B Roadkill Expert bulk kit (9 sheets, 36 sq ft — for full vehicle treatment) Stinger RKU8 Roadkill Ultimate (premium 3-layer upgrade for critical areas) Stinger RKFR6 / RKFR69 Roadkill Fast Rings (for speaker mounting point treatment) Stinger RKINSTALL sound deadener installation kit (roller and knife for application) Frequently Asked Questions Is the RKX4 the same material as the RKX36B bulk kit? Yes. The RKX4 uses the same Roadkill Expert specification — identical butyl blend, 6 mil aluminium layer, and adhesion specification. The RKX4 is a 2-pack (4 sq ft) for single-area or trial applications; the RKX36B is a 9-sheet bulk pack (36 sq ft) for full vehicle treatment. Is 4 sq ft enough for a full door treatment? A standard car front door inner skin typically requires 3–5 sq ft for full coverage. The RKX4 may be sufficient for one door or a partial treatment. For a complete two-door treatment, the RKX36B bulk pack or multiple RKX4 packs are recommended. How do I apply Roadkill Expert? Clean the metal surface with wax and grease remover or methylated spirits and allow it to dry. Cut the sheet to shape, peel the backing, press it firmly onto the panel, and roll with the Stinger RKINSTALL roller for full contact and maximum adhesion. Does this product work on factory speakers? Yes. Treating door inner skins with Roadkill Expert improves the mounting stability for factory speakers — reducing the panel vibration that causes rattles and degraded bass response, even without an upgraded speaker or amplifier. Can I use the RKX4 alongside Roadkill Fast Rings for a speaker installation? Yes. Apply Roadkill Expert to the door inner skin first, then install the Stinger RKFR6 Fast Rings at the speaker mounting location. Together they address both panel resonance (Expert) and acoustic coupling at the speaker (Fast Rings) for maximum improvement. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger RKU8 Roadkill Ultimate 3-Layer Universal Sound Damping Kit (8 Sq Ft) The top-tier Roadkill option three-layer butyl, aluminium, and acoustic foam construction in one sheet. Kills panel resonance, reduces road noise, absorbs high frequencies, and acts as a thermal barrier. 8 sq ft across two sheets. Product Overview The Stinger RKU8 is a premium 3-layer sound damping kit from the Roadkill Ultimate range. Unlike standard single or dual-layer sound damping, Roadkill Ultimate combines all three treatment layers in a single sheet replacing the need to apply separate materials for vibration damping and acoustic absorption. This means faster installation with better results. The three-layer construction works from the inside out: Bottom layer — Ultra-dense butyl blend: Applied directly to the metal panel, this proprietary butyl compound absorbs acoustical energy, kills panel vibrations, squeaks, and rattles at their source. Middle layer — Aluminium foil (3 mil): Assists with heat dissipation and provides structural integrity, connecting the butyl and foam layers. Top layer — Acoustic foam (2 mil): Absorbs and diffuses high-frequency sounds, acts as a thermal barrier, and absorbs sound waves trapped in empty door and panel cavities. Self-adhesive with waterproof construction suitable for doors, roof, floor, firewall, boot, and any metal panel surface. Features & Benefits Three-layer construction replaces the need to apply separate damping and absorption materials Ultra-dense butyl blend bottom layer — kills panel resonance, squeaks, and rattles Aluminium middle layer — heat dissipation and structural connection Acoustic foam top layer — absorbs high frequencies and acts as thermal barrier Highest damping-to-weight ratio available in the Roadkill range Self-adhesive — peel and press to apply Waterproof — safe for all metal panel locations Suitable for doors, roof, floor, firewall, and boot Technical Specs Specification Detail SKU / Part Number RKU8 Brand Stinger Series Roadkill Ultimate Coverage 8 sq ft total — 2 sheets at 18" × 32" (approx. 46cm × 81cm each) Minimum Thickness 5.5mm Weight (per kit) 0.55 lbs Aluminium Layer 3 mil Foam Layer 2 mil Construction 3-layer: butyl blend + aluminium + acoustic foam Adhesive Self-adhesive butyl layer Waterproof Yes Compatible With / Goes Well With Direct Vehicle Fit: Universal — suitable for any vehicle metal panel surface Goes Well With: Stinger RKFR6 / RKFR69 Roadkill Fast Rings (for acoustic coupling at speaker mounting points) Stinger RKCP12 Roadkill Carpet Foam Pad (for under-carpet floor treatment) Stinger RKINSTALL sound deadener installation kit (roller and knife for application) Frequently Asked Questions How does Roadkill Ultimate differ from standard Roadkill Expert? Roadkill Expert is a single-layer butyl damping sheet — it targets panel vibration and resonance. Roadkill Ultimate adds an aluminium layer and an acoustic foam layer on top of the butyl, combining vibration damping, heat dissipation, and high-frequency sound absorption in a single sheet. Ultimate is the premium option that eliminates the need to apply two separate materials. What surfaces can the RKU8 be applied to? All metal panel surfaces — doors (inner skin), roof, floor, firewall, boot floor, and transmission tunnel. Do not apply directly to plastic panels or soft trim components. Is this product self-adhesive? Yes. The butyl bottom layer is self-adhesive. Clean the metal surface (wax and grease remover recommended), peel the backing, and press the sheet firmly onto the panel. Use the Stinger RKINSTALL roller to ensure full contact and maximum adhesion. How much coverage does 8 sq ft provide? Two sheets at 18" × 32" (approx. 46cm × 81cm) — enough to treat one standard car door fully, or two partial panel areas. For a full interior treatment, multiple kits are required. Contact the F.A.E. team for guidance on how many kits are needed for your vehicle. Does Roadkill Ultimate replace the need for the RKCP12 carpet pad? No. Roadkill Ultimate is applied to the bare metal panel surface. The RKCP12 carpet pad is placed under the factory carpet on top of the treated floor. They are complementary products — use Roadkill Ultimate on the floor metal first, then lay the RKCP12 on top before replacing the carpet. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger STK8 8GA 2-Channel Amplifier Power Wiring Kit A complete, value-focused 8GA amplifier wiring kit for 2-channel or mono-block amplifier installations CCA power cable, twisted pair RCA, speaker wire, 60A mini ANL fuse, and installation accessories. Product Overview The Stinger STK8 is a complete 8GA amplifier wiring kit designed for 2-channel or mono-block amplifier installations. It provides everything required for a standard installation, including power and ground cable, a twisted pair RCA interconnect, speaker wire, remote turn-on wire, and a 60A mini ANL fuse holder with fuse. The STK8 uses CCA (copper-clad aluminium) power and ground cable rather than OFC (oxygen-free copper). CCA is a cost-effective conductor material suited to entry-level installations for premium OFC performance, see the Stinger 4000 Series SK4281 or SK4681 wiring kit. Features & Benefits Complete bundle for 2-channel or mono-block amplifier installations 8GA CCA power and ground cable 5m twisted pair RCA interconnect 6m 16AWG speaker cable 5m remote turn-on (trigger) wire 60A mini ANL fuse with fuse holder Installation accessories included Technical Specs Specification Detail SKU / Part Number STK8 Brand Stinger Wire Gauge 8 AWG (8GA) Conductor Type CCA (Copper-Clad Aluminium) Power & Ground Wire 8GA CCA (lengths not confirmed — contact F.A.E.) RCA Cable Included Yes — 5m twisted pair Speaker Cable Included Yes — 6m 16AWG Remote Wire Length 5m Fuse Rating 60A Mini ANL Fuse Holder Mini ANL fuse holder Installation Accessories Included Compatible With / Goes Well With Direct Vehicle Fit: Universal — suitable for 2-channel or mono-block amplifier installations Goes Well With: Entry-level to mid-range 2-channel or mono-block car audio amplifiers Stinger SK4281 / SK4681 4000 Series 8GA kits (OFC upgrade for higher-performance builds) Aftermarket car audio speakers Frequently Asked Questions What is the difference between the STK8 and the SK4281? Both are 8GA amplifier wiring kits. The STK8 uses CCA conductors, includes a twisted pair RCA and speaker wire, and is designed for entry-level value installations. The SK4281 uses OFC tinned hyper-twist conductors and is a premium cable kit without RCA or speaker wire. Choose the STK8 for a complete entry-level bundle; choose the SK4281 for premium cabling quality. What is CCA cable and is it suitable for my installation? CCA (copper-clad aluminium) uses an aluminium core with a copper coating. It is lighter and more affordable than pure OFC copper, and is well-suited to entry-level car audio installations. For high-powered or more demanding systems, OFC wiring is recommended. Does this kit include an RCA cable and speaker wire? Yes. The STK8 includes a 5m twisted pair RCA interconnect and 6m of 16AWG speaker wire — making it a complete single-purchase bundle for a 2-channel amplifier installation. What fuse does this kit use? The STK8 uses a 60A mini ANL fuse with a mini ANL fuse holder. Confirm the specific fuse format before purchasing replacement fuses. Are exact power and ground wire lengths confirmed? Exact power and ground cable lengths are not specified in the available supplier data. Contact the F.A.E. team to confirm before purchasing if specific lengths are required. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-MZ05 9" Trapezoid Fascia Mazda 3 2004-2009 A vehicle-specific 9" trapezoid fascia for the Mazda 3 (2004-2009), the SF9-MZ05 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting hardware must be sourced separately. Product Overview The Stinger SF9-MZ05 is a 9" trapezoid fascia designed specifically for the Mazda 3 from 2004-2009. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Mazda 3 dashboard opening. The fascia is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Mazda 3 2004-2009 Specific Fitment: The SF9-MZ05 is designed specifically for the Mazda 3 from 2004-2009, providing a precise dashboard fit for 9" trapezoid head unit installations in this model. 9" Trapezoid Head Unit Aperture: The SF9-MZ05 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-MZ05 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia Only: The SF9-MZ05 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-MZ05 Brand Stinger Compatible Vehicles Mazda 3 2004-2009 Application 9" Trapezoid Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-MZ05 is designed for the Mazda 3 from 2004-2009 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm your specific Mazda 3 variant and build date before purchase. Frequently Asked Questions Is the SF9-MZ05 compatible with standard Double DIN head units? No. The SF9-MZ05 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-MZ05 include mounting brackets or wiring harnesses? No. The SF9-MZ05 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-MZ05? The SF9-MZ05 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Is the SF9-MZ05 compatible with all Mazda 3 variants from 2004-2009? The SF9-MZ05 is confirmed for the Mazda 3 from 2004-2009. Confirm your specific variant and build date before purchase. What additional components are needed for a complete installation with the SF9-MZ05? The SF9-MZ05 is a fascia panel only. A wiring harness, steering wheel control interface, antenna adaptor, and mounting hardware will also be required for a complete head unit installation. Use the Stinger and Aerpro vehicle fitment guides to confirm the correct additional components for your specific Mazda 3 before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-FD05 9" Trapezoid Fascia Ford Ranger 2007-2011 A vehicle-specific 9" trapezoid fascia for the Ford Ranger (2007-2011), the SF9-FD05 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting hardware must be sourced separately. Product Overview The Stinger SF9-FD05 is a 9" trapezoid fascia designed specifically for the Ford Ranger from 2007-2011. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Ford Ranger dashboard opening. The fascia is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Ford Ranger 2007-2011 Specific Fitment: The SF9-FD05 is designed specifically for the Ford Ranger from 2007-2011, providing a precise dashboard fit for 9" trapezoid head unit installations in this model. 9" Trapezoid Head Unit Aperture: The SF9-FD05 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-FD05 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia Only: The SF9-FD05 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-FD05 Brand Stinger Compatible Vehicles Ford Ranger 2007-2011 Application 9" Trapezoid Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-FD05 is designed for the Ford Ranger from 2007-2011 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm your specific Ranger variant and build date before purchase. Frequently Asked Questions Is the SF9-FD05 compatible with standard Double DIN head units? No. The SF9-FD05 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-FD05 include mounting brackets or wiring harnesses? No. The SF9-FD05 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-FD05? The SF9-FD05 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Is the SF9-FD05 compatible with all Ford Ranger variants from 2007-2011? The SF9-FD05 is confirmed for the Ford Ranger from 2007-2011. Confirm your specific variant and build date before purchase. What additional components are needed for a complete installation with the SF9-FD05? The SF9-FD05 is a fascia panel only. A wiring harness, steering wheel control interface, antenna adaptor, and mounting hardware will also be required for a complete head unit installation. Use the Stinger and Aerpro vehicle fitment guides to confirm the correct additional components for your specific Ford Ranger before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-TY17 9" Trapezoid Fascia Toyota Camry 2006-2011 Silver A vehicle-specific 9" trapezoid fascia in silver for the Toyota Camry (2006-2011), the SF9-TY17 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting brackets must be sourced separately. Product Overview The Stinger SF9-TY17 is a 9" trapezoid fascia designed specifically for the Toyota Camry from 2006-2011. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Toyota Camry dashboard opening. The fascia is finished in silver and is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Toyota Camry 2006-2011 Specific Fitment: The SF9-TY17 is designed specifically for the Toyota Camry from 2006-2011, providing a precise dashboard fit for 9" trapezoid head unit installations in this model. 9" Trapezoid Head Unit Aperture: The SF9-TY17 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-TY17 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Silver Finish: The silver finish is designed to complement the factory interior styling of the Toyota Camry 2006-2011, providing a factory-consistent appearance around the aftermarket head unit after installation. Fascia Only: The SF9-TY17 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-TY17 Brand Stinger Compatible Vehicles Toyota Camry 2006-2011 Application 9" Trapezoid Colour Silver Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-TY17 is designed for the Toyota Camry from 2006-2011 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm compatibility with your specific Camry variant and build date before purchase. Frequently Asked Questions Is the SF9-TY17 compatible with standard Double DIN head units? No. The SF9-TY17 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-TY17 include mounting brackets or wiring harnesses? No. The SF9-TY17 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-TY17? The SF9-TY17 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Is the SF9-TY17 compatible with all Toyota Camry variants from 2006-2011? The SF9-TY17 is confirmed for the Toyota Camry from 2006-2011. Confirm your specific variant and build date before purchase. What colour is the SF9-TY17? The SF9-TY17 is finished in silver, designed to complement the factory interior styling of the Toyota Camry 2006-2011.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less