Victron Energy Skylla-i 24V 100A (1+1) Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide Product A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Skylla-i (1+1): two outputs to charge 2 battery banks The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Skylla-i (3): three full current outputs to charge 3 battery banks The Skylla-i (3) features 3 isolated outputs. All outputs can supply the full rated output current. Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Victron Energy SKI024100000 Specifications: Skylla-i Input voltage (VAC): 230 V Input voltage range (VAC): 185-265 V Input voltage range (VDC): 180-350 V Maximum AC input current @ 180 VAC: 20 A Frequency (Hz): 45-65 Hz Power factor: 0,98 Charge voltage 'absorption' (VDC): 28,8 V Charge voltage 'float' (VDC): 27,6 V Charge voltage ‘storage' (VDC): 26,4 V Charge current (A): 100 A Charge current starter batt. (A): 4 Charge algorithm: 7 stage adaptive Battery capacity (Ah): 500-1000 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, galvanically isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay: DPST, AC rating: 240VAC/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes Protection Battery: reverse polarity (fuse), Output short circuit, Over temperature Operating temp. range -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing) max 95% Enclosure: Material & Colour: aluminium (blue RAL 5012) Battery-connection: M8 bolts 230 VAC-connection: screw-clamp 10mm² (AWG 7) Protection category: IP 21 Weight kg (lbs): 7 kg (16 lbs)
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla-i 24V 80A (3) Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide Product A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Skylla-i (1+1): two outputs to charge 2 battery banks The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Skylla-i (3): three full current outputs to charge 3 battery banks The Skylla-i (3) features 3 isolated outputs. All outputs can supply the full rated output current. Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Victron Energy SKI024080002 Specifications: Skylla-i Input voltage (VAC): 230 V Input voltage range (VAC): 185-265 V Input voltage range (VDC): 180-350 V Maximum AC input current @ 180 VAC: 16 A Frequency (Hz): 45-65 Hz Power factor: 0,98 Charge voltage 'absorption' (VDC): 28,8 V Charge voltage 'float' (VDC): 27,6 V Charge voltage ‘storage' (VDC): 26,4 V Charge current (A): 3 x 80 A Charge current starter batt. (A): n. a. Charge algorithm: 7 stage adaptive Battery capacity (Ah): 400-800 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, galvanically isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay: DPST, AC rating: 240VAC/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes Protection Battery: reverse polarity (fuse), Output short circuit, Over temperature Operating temp. range -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing) max 95% Enclosure: Material & Colour: aluminium (blue RAL 5012) Battery-connection: M8 bolts 230 VAC-connection: screw-clamp 10mm² (AWG 7) Protection category: IP 21 Weight kg (lbs): 7 kg (16 lbs)
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla-i 24V 80A (1+1) Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide Product A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Skylla-i (1+1): two outputs to charge 2 battery banks The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Skylla-i (3): three full current outputs to charge 3 battery banks The Skylla-i (3) features 3 isolated outputs. All outputs can supply the full rated output current. Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Victron Energy SKI024080000 Specifications: Skylla-i Input voltage (VAC): 230 V Input voltage range (VAC): 185-265 V Input voltage range (VDC): 180-350 V Maximum AC input current @ 180 VAC: 16 A Frequency (Hz): 45-65 Hz Power factor: 0,98 Charge voltage 'absorption' (VDC): 28,8 V Charge voltage 'float' (VDC): 27,6 V Charge voltage ‘storage' (VDC): 26,4 V Charge current (A): 80 A Charge current starter batt. (A): 4 A Charge algorithm: 7 stage adaptive Battery capacity (Ah): 400-800 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, galvanically isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay: DPST, AC rating: 240VAC/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes Protection Battery: reverse polarity (fuse), Output short circuit, Over temperature Operating temp. range -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing) max 95% Enclosure: Material & Colour: aluminium (blue RAL 5012) Battery-connection: M8 bolts 230 VAC-connection: screw-clamp 10mm² (AWG 7) Protection category: IP 21 Weight kg (lbs): 7 kg (16 lbs)
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Sun Inverter 24/250-10 IEC
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Sun Inverter 12/250-15 IEC
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy SmartShunt 2000A / 50mV - Bluetooth Battery Shunt: Powerful Battery Monitor with Bluetooth on Board for Monitoring on Your Mobile Phone, Tablet or Computer Smart Battery Shunt 2000A/50MV The SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. The SmartShunt is available in 2000A. The SmartShunt connects via Bluetooth to the VictronConnect App. The VictronConnect App is used to read out all monitored battery parameters and is also used to make or change settings. Alternatively, the SmartShunt can connect to a GX device, like the ColorControl GX or the Cerbo GX. The SmartShunt has an auxiliary input that can be used to monitor the voltage of a second battery or to monitor the midpoint of a battery bank. The auxiliary input can also be used for battery temperature monitoring together with the optional Temperature sensor for BMV. Differences Compared To BMV712 Battery Monitor: No Programmable Visual & Audible Alarm No Programmable Relay Victron Energy SHU050220050 Specifications: Supply Voltage Range: 6,5 - 70 VDC Current Draw: < 1mA Input Voltage Range, Auxiliary Battery: 6,5 - 70 VDC Battery Capacity (Ah): 1 - 9999 Ah Operating Temperature Range: -40 +50°C (-40 - 120°F) Measures Voltage of Second Battery, Or Temperature, or Midpoint: Yes Temperature Measurement Range: -20 +50°C VE. Direct Communication Port: Yes Current: ± 0,1A Voltage: ± 0,01V Amp Hours: ± 0,1 Ah State of Charge (0 Р100%): ± 0,1% Time to Go: ± 1 min Temperature: (0 - 50°C or 30 - 120°F) ± 1°C/°F Accuracy of Current Measurement: ± 0,4% Offset Less Than: 20 / 40 / 80 mA Accuracy of Voltage Measurement: ± 0,3% Dimensions (H X W X D): 500A: 46 x 120 x 54 mm Protection Category: IP21 Safety: EN 60335-1 Emission / Immunity: EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3 Automotive: EN 50498 Cables (Included): Two Cables with Fuse, for ‘+' Connection & Starter Battery or Midpoint Connection Temperature Sensor: Optional (ASS000100000)
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy SmartShunt 1000A / 50mV - Bluetooth Battery Shunt: Powerful Battery Monitor with Bluetooth on Board for Monitoring on Your Mobile Phone, Tablet or Computer Smart Battery Shunt 1000A/50MV The SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. The SmartShunt is available in 1000A. The SmartShunt connects via Bluetooth to the VictronConnect App. The VictronConnect App is used to read out all monitored battery parameters and is also used to make or change settings. Alternatively, the SmartShunt can connect to a GX device, like the ColorControl GX or the Cerbo GX. The SmartShunt has an auxiliary input that can be used to monitor the voltage of a second battery or to monitor the midpoint of a battery bank. The auxiliary input can also be used for battery temperature monitoring together with the optional Temperature sensor for BMV. Differences Compared To BMV712 Battery Monitor: No Programmable Visual & Audible Alarm No Programmable Relay Victron Energy SHU050210050 Specifications: Supply Voltage Range: 6,5 - 70 VDC Current Draw: < 1mA Input Voltage Range, Auxiliary Battery: 6,5 - 70 VDC Battery Capacity (Ah): 1 - 9999 Ah Operating Temperature Range: -40 +50°C (-40 - 120°F) Measures Voltage of Second Battery, Or Temperature, or Midpoint: Yes Temperature Measurement Range: -20 +50°C VE. Direct Communication Port: Yes Current: ± 0,1A Voltage: ± 0,01V Amp Hours: ± 0,1 Ah State of Charge (0 Р100%): ± 0,1% Time to Go: ± 1 min Temperature: (0 - 50°C or 30 - 120°F) ± 1°C/°F Accuracy of Current Measurement: ± 0,4% Offset Less Than: 20 / 40 / 80 mA Accuracy of Voltage Measurement: ± 0,3% Dimensions (H X W X D): 500A: 46 x 120 x 54 mm Protection Category: IP21 Safety: EN 60335-1 Emission / Immunity: EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3 Automotive: EN 50498 Cables (Included): Two Cables with Fuse, for ‘+' Connection & Starter Battery or Midpoint Connection Temperature Sensor: Optional (ASS000100000)
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla Battery Charger 48V 50A 2C: Perfect Chargers for Any Type of Battery Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3 phase input models, the chargers also accept a DC supply. Controlled charging Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes. Use of TG chargers as a power supply As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24V models only) The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. To increase battery life: temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Victron Energy SDTG4800501 Specifications: Dimensions (L x W x H): 365 x 250 x 257mm Part Number: SK48/50 Charging Current: 50 Amps Type Of Charger: 10 step battery charger Insulation: IP21 Type Of Battery: Flooded, AGM, GEL Battery Capacity: 250-500 Ah Charging Voltage: 48 - 66V DC
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla Battery Charger 48V 25A 2C: Perfect Chargers for Any Type of Battery Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3 phase input models, the chargers also accept a DC supply. Controlled charging Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes. Use of TG chargers as a power supply As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24V models only) The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. To increase battery life: temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Victron Energy SDTG4800251 Specifications: Dimensions (L x W x H): 365 x 250 x 147mm Part Number: SK48/25 Charging Current: 25 Amps Type Of Charger: 9 step battery charger Insulation: IP21 Type Of Battery: Flooded, AGM, GEL Battery Capacity: 125-250 Ah Charging Voltage: 48 - 66V DC
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla-TG Battery Charger 24/100 (1+1) 120-240V: The Battery Charger From Victron Energy Have Been Designed to Be a True Worldwide Product Universal 90-265 V AC input voltage range and also suitable for DC supply All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. The chargers will also accept a 90-400 V DC supply. Germanischer Lloyd approval The Chargers have been approved by Germanischer Lloyd (GL) to environmental category C, EMC 1. Category C applies to equipment protected from the weather. EMC 1 applies to conducted and radiated emission limits for equipment installed on the bridge of a ship. The approval to GL C, EMC1 implies that the Chargers also complies to IEC 60945-2002, category ‘protected' and ‘equipment installed on the bridge of a ship'. The GL certification applies to 185-265 V AC supply. Victron Energy SDTG2401003 Features: Microprocessor control Can be used as power supply Battery temperature sensor for temperature compensated charging Battery voltage sensing to compensate for voltage loss due to cable resistance Victron Energy SDTG2401003 Specifications: Input voltage (V AC): 230 Input voltage range (V AC): 90-265 Input voltage range (V DC): 90-400 Frequency (Hz): 45-65 Hz or DC Power factor: 1 Charge voltage 'absorption' (V DC): 28,5 Charge voltage 'float' (V DC): 26,5 Charge current house battery (A): 100 Charge current starter battery (A): 4 Charge characteristic: IUoUo (three step) Battery capacity (Ah): 500-1000 Temperature sensor: Yes Can be used as power supply: Yes Remote alarm: Potential free contacts 60V / 1A (1x NO and 1x NC) Forced cooling: Yes Protection: a, b, c, d Operating temp. range: -40 to +50°C (-40 - 122°F) Full output current up to 40°C Humidity (non-condensing): max 95%
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla Battery Charger 24V 100A 2C: Perfect Chargers for Any Type of Battery Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3 phase input models, the chargers also accept a DC supply. Controlled charging Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes. Use of TG chargers as a power supply As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24V models only) The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. To increase battery life: temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Victron Energy SDTG2401001 Specifications: Dimensions (L x W x H): 365 x 250 x 257mm Part Number: SK24/100 Charging Current: 100 Amps Type Of Charger: 6 step battery charger Insulation: IP21 Type Of Battery: Flooded, AGM, GEL Battery Capacity: 500-1000 Ah Charging Voltage: 24 -33 V DC
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
Victron Energy Skylla Battery Charger 24V 80A 2C: Perfect Chargers for Any Type of Battery Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3 phase input models, the chargers also accept a DC supply. Controlled charging Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes. Use of TG chargers as a power supply As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24V models only) The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. To increase battery life: temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting. Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Victron Energy SDTG2400801 Specifications: Dimensions (L x W x H): 365 x 250 x 257mm Part Number: SK24/80 Charging Current: 80 Amps Type Of Charger: 5 step battery charger Insulation: IP21 Type Of Battery: Flooded, AGM, GEL Battery Capacity: 400-800 Ah Charging Voltage: 24 -33V DC
Legendary Products & Support From Authorized Dealers
When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Victron Energy dealer today!
