12/24V Compatible, Making It Suitable for Use in A Wide Range of Vehicles Including Cars & Trucks 4.5A Three Port USB In-Car Charger The Aerpro APCC320 allows you to conveniently charge your smartphone, tablet or other USB device right from the accessory socket in your vehicle. Featuring three USB ports, 5V/2.0A USB-A and two 5V/2.5A (shared) USB-A ports, it is designed to charge up to three devices at a time. The 1.0M cable length allows the charging unit to be positioned virtually anywhere in the vehicle and it comes supplied with adhesive tape and rear seat mounting clip for simple installation. The gloss black finish with blue LED power indicator light presents a modern and stylish design that will suit the vehicle interior. Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

To Connect ("Patch In") One Electronic or Optical Device to Another for Signal Routing Universal head unit patch lead for connection to the DNA range of EVO SWC series of steering wheel controllers. NOTE: Use with Type C CAN bus SWC controllers with model numbers ending in (C). This patch lead works by using a loop with a resistor from pin 12 to pin 4 to tell the interface what make of head unit is present. The coloured loop wires provided represent the different resistor values. Pins 2, 7 and 8 are used for the signal from the interface to the head unit. This will be either a 3.5mm plug or a single wire, this will depend on the brand of head unit. A 3.5mm plug and a single wire are provided, use the correct lead for the make of the head unit being fitted. Note the orientation of the terminal to be inserted into the connector. Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

Stream Music from Your Smartphone or Tablet Through Your Car's Speakers iSimple AUX Flush Mount Kit The low profile auxiliary input keeps factory look to vehicle interior. Connector labeled Audio Input, Connects to most audio sources. Legendary Products & Support From Authorized Dealers When you choose iSimple, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized iSimple dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by iSimple's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized iSimple dealer today!

Read more less

Relocate Your HEIGH10 or ELEV8 Hide-Away Module 1.5m LVDS Extension Harness Product Overview The Stinger SE-1502 is a 1.5-metre LVDS extension harness designed to extend the LVDS signal connection between the Stinger HEIGH10 (UN1810) or ELEV8 (UN1880) display and the hide-away processing module during relocation installations. The SE-1502 is used alongside the SE-1501 8-pin display extension harness both harnesses are required when relocating the hide-away module. The SE-1502 is not a standalone solution; it must be paired with the SE-1501. The SE-1501 is sold separately. The SE-1502 is compatible with the HEIGH10 and ELEV8 only it is not a universal LVDS extension cable. Key Specifications Manufacturer Part Number: SE-1502 Function: LVDS extension harness for hide-away module relocation Length: 5ft / 1.5 metres Cable type: LVDS Compatible products: Stinger HEIGH10 UN1810, Stinger ELEV8 UN1880 Companion harness required: SE-1501 8-pin harness (sold separately) — required alongside SE-1502 for full module relocation Features & Benefits Extended LVDS Signal Path — Provides 1.5 metres of additional LVDS harness length, enabling the hide-away module to be positioned further from the display in custom installations. LVDS Signal Integrity — Maintains the high-bandwidth LVDS video signal over the 1.5-metre extension, ensuring display quality is not compromised during relocation. HEIGH10 and ELEV8 Compatible — Confirmed for use with the Stinger HEIGH10 (UN1810) and ELEV8 (UN1880) infotainment systems only. Companion to SE-1501 — Works alongside the SE-1501 8-pin display extension harness for a complete hide-away module relocation solution. Technical Specs Specification Detail Part Number SE-1502 Brand Stinger Function LVDS extension harness Length 5ft / 1.5 metres Cable Type LVDS Compatible Products Stinger HEIGH10 UN1810, Stinger ELEV8 UN1880 Companion Harness SE-1501 8-pin harness required for hide-away module relocation (sold separately) Compatible With / Goes Well With Stinger HEIGH10 UN1810 infotainment system Stinger ELEV8 UN1880 infotainment system Stinger SE-1501 8-pin display extension harness (sold separately — required alongside SE-1502 when relocating hide-away module) Frequently Asked Questions What does the SE-1502 do? The SE-1502 extends the LVDS video signal connection between the HEIGH10 or ELEV8 display and the hide-away module by 1.5 metres, enabling the module to be repositioned further from the display in custom installations. Do I need any other harness alongside the SE-1502? Yes — the SE-1501 8-pin display extension harness (sold separately) is also required when relocating the hide-away module. The SE-1502 alone is not sufficient for a full module relocation. Which Stinger infotainment systems is the SE-1502 compatible with? The SE-1502 is confirmed for use with the Stinger HEIGH10 (UN1810) and ELEV8 (UN1880) only. It is not compatible with other infotainment systems. How long is the SE-1502 harness? The SE-1502 is 1.5 metres (5 feet) in length. What is LVDS and why is a separate harness needed? LVDS (Low-Voltage Differential Signalling) is a high-speed data connection used to transmit the video signal between the display and the processing module in the HEIGH10 and ELEV8. It uses a different connector and signal type to the 8-pin display harness, which is why both the SE-1502 (LVDS) and the SE-1501 (8-pin) are required for a complete module relocation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AXSWC Universal Fit - Auto Detect Technology! Universal Steering Wheel Control InterfaceThe AXSWC by Axxess Interface is a universal steering wheel control interface that allows steering wheel controls to be retained in various vehicles when upgrading to an aftermarket radio. The AXSWC has the ability to auto-detect many vehicle makes and aftermarket radios and it will pre-set the steering wheel controls to the aftermarket radio automatically so no programming is required. It also has the ability to be manually programmed to suit vehicles that are not compatible with the auto-detection feature. The AXSWC is not a plug-and-play interface, it requires installation and it is recommended that wires are soldered for the best connection. Please Note: Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Features: Allows you to upgrade to an aftermarket headunit whilst maintaining the use of your factory steering wheel controls. Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road. One Interface does it all, no additional interfaces are needed. Designed to be compatible with all major radio brands. Auto detects (1) vehicle type, radio connection, and preset controls. Ability to dual assign steering wheel control buttons. It can be manually programmed for most vehicles. Retains settings even after battery disconnection or interface removal. All connections are done at the radio location. Requires installation and it is recommended that wires are soldered for the best connection. Micro USB Updatable Specifications: Installation Type: Hard Wire (Soldering Recommended) Vehicle Compatibility: Universal (Suits Various Vehicles) Headunit Compatibility: Most Major Brands Aftermarket Headunits Weight: 0.01kg Vehicle Compatibility: Chevrolet Corvette (2005 - 2013) Chevrolet Silverado (2007 - 2013) Chrysler 300C (2005 - 2008) Chrysler Neon (2000 - 2002) Chrysler PT Cruiser (2000 - 2005) Chrysler Voyager (1997 - 2000) Daewoo Kalos T200 (2003 - 2004) Dodge Caliber (2009 - 2011) Dodge Journey (2012 - 2016) Fiat Freemont (2012 - 2016) Ford Escape MY10 (2006 - 2012) Ford Explorer U152 - Third Gen. (2002 - 2005) Ford F150 (1997 - 1998) Ford F150 (1999 - 2002) Ford F150 4-Door Pick-Up (2001 - 2002) Ford F250 (1998) Ford F250 (1999 - 2002) Ford F350 (1999 - 2002) Ford Falcon AU Series I (1998 - 2000) Ford Falcon BA, BF (2002 - 2008) Ford Territory SX, SY (2004 - 2011) Foton Tunland (2013 - ) Holden Barina TK Hatch (2005 - 2008) Holden Barina TM (2011 - 2016) Honda Accord (2003 - 2007) Honda Accord Euro (2003 - 2007) Honda MDX (2001 - 2006) Honda Odyssey (1995 - 2000) Honda Odyssey (2004 - 2008) Honda Odyssey Auto (2009 - 2011) Honda Odyssey Luxury Auto (2009 - 2011) Honda Odyssey (2012 - 2013) Honda Odyssey (2014 - ) Hummer H2 (2003 - 2008) Hummer H3 (2007 - 2009) Hyundai Getz (2002 - 2011) Jaguar XJ (1998 - 2002) Jeep Cherokee KJ (2001 - 2007) Jeep Cherokee KL (2015 - ) Jeep Commander XK (2006 - 2009) Jeep Compass MP (2017 - ) Jeep Grand Cherokee WJ, WG (1999 - 2000) Jeep Grand Cherokee WJ, WG (2001 - 2005) Jeep Grand Cherokee WH (2005 - 2008) Jeep Grand Cherokee WK (2011 - 2013) Jeep Patriot MK (2007 - 2008) Jeep Wrangler TJ (2003 - 2007) Kia Magentis (2006 - 2010) Kia Sorento BL (2003 - 2006) Landrover Discovery (1994 - 2004) Lexus RX330 (2003 - 2008) Lexus RX350 (2003 - 2008) Lexus SC430 (2001 - 2010) Mazda 6 (Atenza) GG, GY (2002 - 2008) Mazda CX5 (2012 - 2014) Mazda CX5 (2015 - 2017) Mazda RX8 (2003 - 2008) Mazda Tribute (2001 - 2005) Mazda Tribute (2006 - 2008) Mitsubishi 380 (2004 - 2010) Mitsubishi Pajero NS, NT, NW (2006 - 2014) Nissan Altima (2013 - 2016) Nissan Pathfinder R51 (2008 - 2013) Nissan Pathfinder R52 (2013 - 2016) Nissan Pulsar B17, C12 SSS (2013 - 2017) Porsche 911 - 996 (1998 - 2004) Porsche Boxster 986 (1997 - 2004) Subaru Liberty (Legacy) (2003 - 2009) Subaru Liberty (Legacy) BM, BR (2009 - 2014) Subaru Outback (2004 - 2008) Subaru Outback (2009 - 2014) Suzuki Grand Vitara (2002 - 2004) Suzuki Liana (2005 - 2007) Toyota RAV4 (2013 - 2018) Toyota Tundra (2007 - 2013) Toyota Tundra (2014 - ) Volvo S80 (1999 - 2006) Volvo V70 (2000 - 2007) Volvo XC70 (2000 - 2007) Inclusions: AXSWC Interface AXSWC Harness (12PIN Harness With Male 3.5mm Jack) 3.5mm Adaptor Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Keep Your Factory Reverse Camera in Your ix35 24-Pin Adaptor for the Early LM Series Product Overview The Stinger SCHYRT3 is a reverse camera retention adaptor designed to maintain the factory OEM reverse camera when installing an aftermarket head unit in the Hyundai ix35 LM series from 2010 to 2013. Using a 24-pin Hyundai-style connector, it passes the factory camera signal through to the new head unit with no additional wiring required. Please note: in some installations, video noise or lines may appear in the camera image. Stinger recommends the PACRPA-VA1 video noise filter (sold separately) to reduce or eliminate this where it occurs. Key Specifications Manufacturer Part Number: SCHYRT3 Function: Factory reverse camera retention Vehicle connector: 24-pin Hyundai-style connector Reverse camera retention: Yes — included with interface Compatible vehicles: Hyundai ix35 LM 2010–2013 Video noise risk: Possible in some installations — PACRPA-VA1 recommended (sold separately) Plug & Play: Yes Features & Benefits OEM Reverse Camera Retained — Passes the factory camera signal through to a compatible aftermarket head unit, maintaining reverse camera functionality without running new wiring. 24-Pin Hyundai Connector — Purpose-built for the 24-pin Hyundai-style connector used in the early ix35 LM series. Covers Early LM Production (2010–2013) — Specifically for the 2010–2013 ix35 LM. The later 2014–2015 ix35 LM is covered by the SCHYRT2. Plug & Play Installation — Connects to the factory camera harness and aftermarket head unit with no splicing or soldering required. Video Noise Solution Available — Where video noise or lines appear in the camera image, the Stinger PACRPA-VA1 video noise filter (sold separately) is the recommended remedy. Technical Specs Specification Detail Part Number SCHYRT3 Brand Stinger Function Reverse camera retention Vehicle Connector 24-pin Hyundai-style Reverse Camera Retention Yes — included with interface Plug & Play Yes Video Noise Risk Possible in some installations Recommended Accessory PACRPA-VA1 video noise filter (sold separately) Compatible With / Goes Well With Hyundai ix35 LM 2010, 2011, 2012, 2013 Compatible aftermarket head units with RCA reverse camera input Frequently Asked Questions Which ix35 models is the SCHYRT3 compatible with? The SCHYRT3 is confirmed for the Hyundai ix35 LM series from 2010 to 2013. It is not confirmed for the 2014–2015 ix35 LM — a different adaptor covers that year range. What connector does the SCHYRT3 use? The SCHYRT3 uses a 24-pin Hyundai-style connector, matching the factory camera harness in the 2010–2013 ix35 LM. What should I do if I get video noise or lines in my reverse camera image? Stinger recommends the PACRPA-VA1 video noise filter, sold separately, to reduce or eliminate video noise or lines that may appear when retaining a factory reverse camera with an aftermarket head unit. Does the SCHYRT3 require any wiring modifications? No — the SCHYRT3 is plug-and-play, connecting directly to the factory camera harness and the aftermarket head unit's RCA reverse camera input without splicing or soldering. My ix35 is a 2014 or 2015 model — is this the right adaptor? No — the 2014–2015 ix35 LM is not covered by the SCHYRT3. Confirm with the supplier which adaptor suits your specific model year and variant. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Keep Your Factory Reverse Camera After a Head Unit Upgrade Hyundai i30 and ix35, Navigation and Non-Navigation Product Overview The Stinger SCHYRT2 is a reverse camera retention adaptor designed to maintain the factory OEM reverse camera when installing an aftermarket head unit in the Hyundai i30 GD/GD2 (2012–2016) and Hyundai ix35 LM (2014–2015). Compatible with both navigation and non-navigation ix35 variants, and with the i30 GD on OEM navigation-equipped models. The adaptor uses a 24-pin Hyundai-style connector and is plug-and-play no splicing or soldering required. Please note: in some installations, video noise or lines may appear in the camera image. Stinger recommends the PACRPA-VA1 video noise filter (sold separately) to reduce or eliminate this. Key Specifications Manufacturer Part Number: SCHYRT2 Function: Factory reverse camera retention Vehicle connector: 24-pin Hyundai-style connector Reverse camera retention: Yes — included with interface Compatible vehicles: Hyundai i30 GD/GD2 2012–2016 — with OEM navigation only Hyundai ix35 LM 2014–2015 — with navigation Hyundai ix35 LM 2014–2015 — without navigation Video noise risk: Possible in some installations — PACRPA-VA1 recommended (sold separately) Plug & Play: Yes Features & Benefits OEM Reverse Camera Retained — Passes the factory camera signal through to a compatible aftermarket head unit, maintaining reverse camera functionality without running new wiring. 24-Pin Hyundai Connector — Purpose-built for the 24-pin Hyundai-style connector used in the i30 GD and ix35 LM, providing a direct plug-in connection. Navigation and Non-Navigation ix35 Covered — Both navigation-equipped and non-navigation ix35 LM (2014–2015) variants are supported by a single adaptor. Plug & Play Installation — Connects to the factory camera harness and aftermarket head unit with no splicing or soldering required. Video Noise Solution Available — Where video noise or lines appear in the camera image, the Stinger PACRPA-VA1 video noise filter (sold separately) is the recommended remedy. Technical Specs Specification Detail Part Number SCHYRT2 Brand Stinger Function Reverse camera retention Vehicle Connector 24-pin Hyundai-style Reverse Camera Retention Yes — included with interface Plug & Play Yes Video Noise Risk Possible in some installations Recommended Accessory PACRPA-VA1 video noise filter (sold separately) Compatible With / Goes Well With Hyundai i30 GD/GD2 2012, 2013, 2014, 2015, 2016 — with OEM navigation only Hyundai ix35 LM 2014, 2015 — with navigation Hyundai ix35 LM 2014, 2015 — without navigation Compatible aftermarket head units with RCA reverse camera input Frequently Asked Questions Is the SCHYRT2 compatible with both navigation and non-navigation models? For the Hyundai ix35 LM, yes — both navigation and non-navigation variants are confirmed. For the Hyundai i30 GD/GD2, compatibility is confirmed for OEM navigation-equipped models only. What connector does the SCHYRT2 use? The SCHYRT2 uses a 24-pin Hyundai-style connector, matching the factory camera harness in the i30 GD and ix35 LM. What should I do if I get video noise or lines in my reverse camera image? Stinger recommends the PACRPA-VA1 video noise filter, sold separately, to reduce or eliminate video noise or lines that may appear when retaining a factory reverse camera with an aftermarket head unit. Does the SCHYRT2 require any wiring modifications? No — the SCHYRT2 is plug-and-play, connecting directly to the factory camera harness and the aftermarket head unit's RCA reverse camera input without splicing or soldering. Is the SCHYRT2 compatible with all Hyundai i30 models? No — compatibility is confirmed for the i30 GD/GD2 series (2012–2016) with OEM navigation only. Other i30 variants or model years are not confirmed by the supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Keep Your Factory Reverse Camera After a Ford Head Unit Upgrade Product Overview The Stinger SCFRRT1 is a reverse camera retention adaptor designed to maintain the factory OEM reverse camera when installing a compatible aftermarket head unit in select Ford vehicles. It passes the factory camera signal through to the new head unit without additional camera wiring. Please note: in some installations, video noise or lines may appear in the camera image. Stinger recommends the PACRPA-VA1 video noise filter (sold separately) to reduce or eliminate this where it occurs. Confirm your specific Ford model, year, and factory connector type with the supplier before purchase no vehicle compatibility list is published in the current supplier data. Key Specifications Manufacturer Part Number: SCFRRT1 Function: Factory reverse camera retention Reverse camera retention: Yes — included with interface Compatible vehicles: Select Ford models — confirm with supplier before purchase Video noise risk: Possible in some installations — PACRPA-VA1 recommended (sold separately) Plug & Play: Yes Features & Benefits OEM Reverse Camera Retained — Passes the factory camera signal through to a compatible aftermarket head unit, maintaining reverse camera functionality without running new wiring. Ford-Specific Interface — Designed for use in select Ford vehicles with compatible factory camera connector configurations. Plug & Play Installation — Connects to the factory camera harness and aftermarket head unit with no splicing or soldering required. Video Noise Solution Available — Where video noise or lines appear in the camera image, the Stinger PACRPA-VA1 video noise filter (sold separately) is the recommended remedy. Technical Specs Specification Detail Part Number SCFRRT1 Brand Stinger Function Reverse camera retention Reverse Camera Retention Yes — included with interface Plug & Play Yes Video Noise Risk Possible in some installations Recommended Accessory PACRPA-VA1 video noise filter (sold separately) Compatible Vehicles Not published — confirm with supplier Compatible With / Goes Well With Select Ford vehicles — confirm model, year, and factory connector type with the supplier before purchase Compatible aftermarket head units with RCA reverse camera input Frequently Asked Questions Which Ford models is the SCFRRT1 compatible with? The supplier has not provided a specific vehicle compatibility list for the SCFRRT1. Confirm your Ford model, year, and factory camera connector type with the supplier before purchase to verify compatibility. Does the SCFRRT1 require any wiring modifications? No — the SCFRRT1 is plug-and-play, connecting directly to the factory camera harness and the aftermarket head unit's RCA reverse camera input without splicing or soldering. What should I do if I get video noise or lines in my reverse camera image? Stinger recommends the PACRPA-VA1 video noise filter, sold separately, to reduce or eliminate video noise or lines that may appear when retaining a factory reverse camera with an aftermarket head unit. Is a vehicle harness included? Stinger's product description indicates an interface is included. Confirm the exact contents with the supplier before purchase. Is the SCFRRT1 suitable for my Ford Ranger or Territory? Specific model compatibility is not published in the current supplier data. Contact the supplier to confirm whether the SCFRRT1 suits your specific Ford model and year before purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Requires a Small Amount of Wiring, Making it Simple to Install!Reverse Camera Retention HarnessThe APVMZ03 enables the OEM reverse camera to be retained when installing an aftermarket AV headunit into the vehicle. The harness includes a vehicle-specific plug that connects to the factory reverse camera loom and provides an RCA plug that connects to the reverse camera input on the aftermarket headunit.The harness only requires a small amount of wiring, a black wire with a ring terminal that needs to be connected to the ground, and a violet/white cable that needs to connect to the reverse trigger (12V), making it simple to install. Suitable for use with Mazda CX7 (2006-2009) vehicles.Important Notes: Black wire with a ring terminal needs to be connected to the ground. The Violet/White cable needs to connect to the reverse trigger (12V). Aftermarket headunit requires rear camera RCA input. Features: Suitable for use in Mazda CX7 (2006-2009) vehicles that have a factory reverse camera fitted Enables the OEM factory-fitted reverse camera to display on a compatible aftermarket AV headunit 4 Pin Vehicle Specific Connector Designed for simple DIY installation Specifications: Harness Type: OEM Reverse Camera Retention Vehicle Plug: 4 PIN Camera Plug: RCA Vehicle Compatibility: Mazda CX7 2006 - 2009 ER Series 1 Weight: 0.01kg Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

"Get Connected" with Our Range of Cables, Leads and Adaptors Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

"Get Connected" With Our Range Of Cables, Leads & Adaptors Product Features: Compatibility: Nissan To 2 x Female ISO Connectors Packaging: Sliding Blister & Card With Hang Hole Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Simplify Speaker Wire Connections when Adding Aftermarket Amplifiers with Our Speaker Connection Harness DNA Speaker HarnessThe DNA ASH33 OEM speaker wiring harness adaptor allows easy connection of your aftermarket speakers to the vehicles factory wiring. Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less