Aerpro AXDISCL2 Amp Interface Data Integrator Chrysler A data interface for Chrysler vehicles, the AXDISCL2 retains factory steering wheel controls, OnStar, OEM Bluetooth, satellite radio, balance and fade, chimes, factory AUX, and rear seat entertainment when replacing the factory radio, with NAV outputs, accessory power, and micro USB firmware updating. Product Overview The Aerpro AXDISCL2 is a data integration interface designed for Chrysler vehicles. It provides retention of factory features that are typically lost when the factory radio is replaced, including OnStar, SYNC, OEM Bluetooth wireless connectivity, satellite radio, balance and fade, chimes, factory AUX-in jack, and rear seat entertainment. The AXDISCL2 incorporates patented built-in steering wheel control technology with a patented auto-detect feature that automatically detects the vehicle type, radio connection, and preset controls, while allowing dual-assignment of steering wheel controls. The interface supports non-amplified, analogue amplified, and digital amplified vehicle systems, though balance and fade are not retained on digital amplified models. NAV outputs provided include parking brake, reverse, and speed sense. Retained Accessory Power (R.A.P.) is also supported, along with telematics retention for SYNC, OnStar, and UVO. Accessory power output is 12V at 10A. Adjustable volume is available for OnStar. The AXDISCL2 is micro USB updatable for firmware updates. This product is dependent on the vehicle application; use the Vehicle Fit Guide to confirm compatibility with your specific Chrysler vehicle before purchase. Features & Benefits Patented Auto-Detect Steering Wheel Control Technology: The AXDISCL2 incorporates patented built-in SWC technology with an auto-detect feature that automatically identifies the vehicle type, radio connection, and preset controls, and allows dual-assignment of steering wheel controls with a compatible aftermarket head unit. OnStar, OEM Bluetooth, and Satellite Radio Retention: The AXDISCL2 retains OnStar, OEM Bluetooth wireless connectivity, and satellite radio functionality if equipped in the vehicle. Adjustable volume control is available for OnStar after installation. Telematics Retention - SYNC, OnStar, and UVO: The AXDISCL2 supports telematics retention for SYNC, OnStar, and UVO systems, maintaining vehicle telematics connectivity after the factory radio is replaced. Supports Non-Amplified, Analogue Amplified, and Digital Amplified Systems: The AXDISCL2 is designed for non-amplified, analogue amplified, and digital amplified Chrysler vehicles. Balance and fade are retained on non-amplified and analogue amplified models but are not supported on digital amplified models. Balance and Fade Retention: Balance and fade are retained when connected to compatible non-amplified or analogue amplified Chrysler vehicles. Digital amplified models are excluded from balance and fade retention. NAV Outputs - Parking Brake, Reverse, and Speed Sense: The AXDISCL2 provides parking brake, reverse, and speed sense NAV output feeds for compatible aftermarket head units that use these signals for safety, navigation, and speed-dependent functions. Retained Accessory Power (R.A.P.): The AXDISCL2 retains the vehicle's R.A.P. function, ensuring accessory features continue to operate after the ignition is turned off in accordance with the factory R.A.P. behaviour. 12V 10A Accessory Power Output: The AXDISCL2 provides a 12V 10A accessory power output for powering connected accessories. Chimes and Factory AUX-In Retention: Factory vehicle chimes and the factory AUX-in jack are retained after installation, preserving these OEM functions with the aftermarket head unit. Rear Seat Entertainment Retention: The AXDISCL2 retains rear seat entertainment functionality. RSE must have been activated by the factory radio prior to installation. Micro USB Updatable: The AXDISCL2 supports firmware updates via micro USB, allowing the interface to be updated for compatibility with new vehicle applications and software improvements. Technical Specs Specification Detail SKU AXDISCL2 Brand Aerpro Compatible Vehicles Chrysler Various Models Amplified System Support Non-Amplified, Analogue Amplified, Digital Amplified Accessory Power Output 12V, 10A Retained Accessory Power (R.A.P.) Yes SWC Technology Patented Built-In with Auto-Detect Dual-Assign SWC Yes OnStar Retention Yes OEM Bluetooth Retention Yes (if equipped) Satellite Radio Retention Yes (if equipped) OnStar Volume Adjustment Yes SYNC Retention Yes UVO Retention Yes Balance and Fade Retention Yes (excludes digital amplified models) Chimes Retention Yes Factory AUX-In Retention Yes Rear Seat Entertainment Retention Yes (RSE must be activated by factory radio) NAV Outputs Parking Brake, Reverse, Speed Sense Firmware Updates Micro USB updatable Compatible With The AXDISCL2 is designed for Chrysler vehicles. This product is dependent on the vehicle application. Use the Vehicle Fit Guide to confirm compatibility with your specific Chrysler vehicle before purchase. Balance and fade retention is not supported on digital amplified models. Rear seat entertainment retention requires RSE to have been activated by the factory radio prior to installation. Frequently Asked Questions Does the AXDISCL2 retain OnStar and OEM Bluetooth after the factory radio is replaced? Yes. The AXDISCL2 retains OnStar and OEM Bluetooth wireless connectivity when equipped in the vehicle. Adjustable volume control for OnStar is also provided through the interface. Does the AXDISCL2 retain balance and fade on all Chrysler vehicles? Balance and fade are retained on non-amplified and analogue amplified Chrysler vehicles. Digital amplified models are excluded from balance and fade retention. Does the AXDISCL2 support rear seat entertainment retention? Yes. The AXDISCL2 retains rear seat entertainment functionality. RSE must have been activated by the factory radio prior to the aftermarket head unit installation for RSE retention to function. How does the auto-detect steering wheel control feature work? The AXDISCL2 uses patented auto-detect technology to automatically identify the vehicle type, factory radio connection type, and preset steering wheel control configurations. This eliminates the need for manual programming of SWC inputs in most supported applications and also allows dual-assignment of steering wheel control buttons with the aftermarket head unit. How do I update the firmware on the AXDISCL2? The AXDISCL2 is updatable via micro USB connection. Connect a micro USB cable from the interface to a computer and follow the firmware update instructions provided by Aerpro to ensure the interface has the latest vehicle application support and software improvements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWLR10C Steering Wheel Control Interface Land Rover Freelander 2 MOST 25 Amplified A CANBUS and fibre optic steering wheel control interface engineered for the Land Rover Freelander 2 (2007-2012) with MOST 25 amplified systems, the SWLR10C retains factory steering wheel controls and the MOST 25 OEM amplified system, and provides reverse trigger, park brake, speed pulse, illumination, and amp remote outputs with no wire cutting required. Product Overview The Aerpro SWLR10C is a CANBUS and fibre optic steering wheel control interface designed for the Land Rover Freelander 2 from 2007-2012 fitted with MOST 25 amplified systems. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. No additional modules are required for CANBUS or fibre optic vehicles. The SWLR10C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the MOST 25 OEM amplified system. To maintain the MOST 25 OEM amplified system, the aftermarket head unit must have RCA pre-outs. The cable from the OEM display must be removed and replaced with the included MOST loop (orange wire) to reroute the signal during installation. After installation, the original navigation display will only show the Land Rover logo and does not support date or time retention. Outputs include reverse trigger (purple/white), park brake (green), speed pulse (pink), illumination (orange), and amp remote (blue). Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWLR10C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWLR10C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. CANBUS and Fibre Optic Integration - No Additional Modules Required: The SWLR10C uses CANBUS and fibre optic integration for direct communication with the vehicle's CANBUS network and MOST 25 fibre optic audio bus, eliminating the need for additional interface modules in the Land Rover Freelander 2. MOST 25 OEM Amplified System Retention: The SWLR10C retains the MOST 25 OEM amplified system in the vehicle. The aftermarket head unit must have RCA pre-outs for MOST 25 amplified system retention to function. The included MOST loop (orange wire) must be connected in place of the OEM display cable to reroute the fibre optic signal. MOST Loop (Orange Wire) Included for Signal Rerouting: The SWLR10C is supplied with a MOST loop (orange wire) that must be installed by removing the cable from the OEM display and replacing it with the loop to correctly reroute the MOST 25 fibre optic signal during installation. Vehicle-Specific Plug - No Wire Cutting Required: The SWLR10C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWLR10C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Reverse Trigger Output (Purple/White): A reverse trigger output via a purple/white wire enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Park Brake Output (Green): A park brake output is provided via a green wire, supplying the park brake signal required by compatible aftermarket head units for safety feature operation. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Illumination Output (Orange): An illumination output is provided via an orange wire, allowing the aftermarket head unit to automatically adjust its display brightness in response to the vehicle's instrument illumination signal. Amp Remote Output (Blue): An amp remote output is provided via a blue wire for triggering the retained OEM amplifier and compatible external amplifiers when the head unit is powered on. Original Navigation Display Limitation: After installation, the original Land Rover navigation display will only show the Land Rover logo. Date and time retention are not supported. Compatible with Aerpro APP8 Secondary ISO Harness: The SWLR10C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWLR10C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWLR10C Brand Aerpro Compatible Vehicles Land Rover Freelander 2, 2007-2012 Interface Type CANBUS and Fibre Optic Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support No OEM Amplified System Retention Yes - MOST 25 (aftermarket head unit requires RCA pre-outs) MOST Loop Yes (orange wire, included) Reverse Trigger Output Yes (Purple/White) Park Brake Output Yes (Green) Speed Pulse Output Yes (Pink) Illumination Output Yes (Orange) Amp Remote Output Yes (Blue) Telephone Mute Output No Original Nav Display Shows Land Rover logo only after installation Date and Time Retention Not supported Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWLR10C is engineered for the Land Rover Freelander 2 from 2007-2012 fitted with MOST 25 amplified systems. To retain the MOST 25 OEM amplified system, the aftermarket head unit must have RCA pre-outs. The cable from the OEM display must be removed and replaced with the included MOST loop (orange wire) to reroute the fibre optic signal. After installation, the original navigation display will only show the Land Rover logo and date and time retention are not supported. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWLR10C require cutting of the factory wiring harness? No. The SWLR10C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWLR10C retain the MOST 25 OEM amplified system? Yes. The SWLR10C retains the MOST 25 OEM amplified system. The aftermarket head unit must have RCA pre-outs for the amplified system retention to function. The included MOST loop (orange wire) must be installed by removing the cable from the OEM display and replacing it with the loop to correctly reroute the fibre optic signal. What happens to the original navigation display after installing the SWLR10C? After installation, the original Land Rover navigation display will only show the Land Rover logo. Date and time retention are not supported. This is a known limitation of the SWLR10C on the Freelander 2 platform. Is a SWC patch lead included with the SWLR10C? No. A steering wheel control patch lead is required to use the SWLR10C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. What is the MOST loop included with the SWLR10C used for? The MOST loop (orange wire) is included to reroute the MOST 25 fibre optic signal after the OEM display cable is removed. During installation, the cable that connects to the OEM display must be disconnected and replaced with the MOST loop to maintain the integrity of the fibre optic signal loop required for MOST 25 amplified system retention.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWKI2C Steering Wheel Control Interface Hyundai and Kia Various Models SPDIF Amplified A CANBUS steering wheel control interface engineered for various Hyundai and Kia vehicles with OEM SPDIF digital amplifiers, the SWKI2C retains factory steering wheel controls and the OEM SPDIF digital amplifier with fader adjustment via the steering wheel controls, and provides reverse trigger, speed pulse, and amp remote outputs with no wire cutting required. Product Overview The Aerpro SWKI2C is a CANBUS steering wheel control interface designed for various Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWKI2C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the OEM SPDIF digital amplifier while allowing fader adjustment via the steering wheel controls. Voice Assistant support is available; if the steering wheel controls do not include a dedicated Voice Assistant button, the answer button functions as voice support instead, provided the aftermarket head unit and paired phone also support the Voice Assistant feature. Outputs include reverse trigger, speed pulse (pink), and amp remote. Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWKI2C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWKI2C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. OEM SPDIF Digital Amplifier Retention with Fader Adjustment: The SWKI2C retains the OEM SPDIF digital amplifier in the vehicle and allows fader adjustment to be performed via the steering wheel controls, preserving the amplified audio system and its adjustability after the head unit upgrade. CANBUS Interface: The SWKI2C uses a CANBUS interface for direct communication with the vehicle's CANBUS network, enabling reliable integration with the supported Hyundai and Kia SPDIF amplified platforms. Vehicle-Specific Plug - No Wire Cutting Required: The SWKI2C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWKI2C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Voice Assistant Support: Voice Assistant support is available through the SWKI2C. If the steering wheel does not include a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Reverse Trigger Output: A reverse trigger output enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Amp Remote Output: An amp remote output is provided for triggering the retained OEM SPDIF digital amplifier when the head unit is powered on. Compatible with Aerpro APP8 Secondary ISO Harness: The SWKI2C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWKI2C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWKI2C Brand Aerpro Compatible Vehicles Hyundai Various Models (SPDIF Amplified), Kia Various Models (SPDIF Amplified) Interface Type CANBUS Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes OEM SPDIF Digital Amplifier Retention Yes (with fader adjustment via SWC) Reverse Trigger Output Yes Park Brake Output No Speed Pulse Output Yes (Pink) Illumination Output No Amp Remote Output Yes Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWKI2C is engineered for various Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. It is not suitable for Hyundai or Kia vehicles without SPDIF digital amplification. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWKI2C require cutting of the factory wiring harness? No. The SWKI2C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWKI2C retain the OEM SPDIF digital amplifier? Yes. The SWKI2C retains the OEM SPDIF digital amplifier and allows fader adjustment to be performed via the steering wheel controls after the head unit upgrade, preserving the amplified audio system functionality. Is a SWC patch lead included with the SWKI2C? No. A steering wheel control patch lead is required to use the SWKI2C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Does the SWKI2C support Voice Assistant functions? Yes. Voice Assistant support is available. If the steering wheel does not have a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Is the SWKI2C suitable for non-amplified Hyundai and Kia vehicles? No. The SWKI2C is designed specifically for Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. Non-amplified vehicles require a different interface. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWMB2C Steering Wheel Control Interface Citroen Mitsubishi and Peugeot Various Models An analogue steering wheel control interface engineered for various Citroen, Mitsubishi, and Peugeot vehicles without OEM amplified sound systems, the SWMB2C retains factory steering wheel controls and OEM AUX input with a vehicle-specific plug connection that requires no cutting of the factory wiring harness. Product Overview The Aerpro SWMB2C is an analogue steering wheel control interface designed for various Citroen, Mitsubishi, and Peugeot vehicles without OEM amplified sound systems. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWMB2C is compatible with SW-type patch leads (sold separately) and supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit. OEM AUX retention is also supported when the aftermarket head unit has a rear RCA AUX input. Voice Assistant support is available; if the steering wheel controls do not include a dedicated Voice Assistant button, the answer button functions as phone support instead, provided the aftermarket head unit and paired phone also support the Voice Assistant feature. Custom button remapping is available and requires a USB-C cable (sold separately). Phone buttons on steering wheels do not support Sony aftermarket head unit models: the Answer button functions as Mute and the Hang Up button functions as Source on Sony units. Alpine, Clarion, Kenwood, Pioneer, and Zenec head units support the phone button. Installation is simplified when the SWMB2C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. The SWMB2C is not suitable for OEM amplified vehicles. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWMB2C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. Vehicle-Specific Plug - No Wire Cutting Required: The SWMB2C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM AUX Input Retention: The SWMB2C supports OEM AUX retention when connected to a compatible aftermarket head unit with a rear RCA AUX input, retaining the factory AUX input functionality after the head unit upgrade. Analogue Interface Type: The SWMB2C uses an analogue interface type, compatible with the steering wheel control signal architecture used in the supported Citroen, Mitsubishi, and Peugeot vehicles. OEM Phone Button Support: The SWMB2C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit. Phone button support is available on Alpine, Clarion, Kenwood, Pioneer, and Zenec head units. On Sony head units, the Answer button functions as Mute and the Hang Up button functions as Source. Voice Assistant Support: Voice Assistant support is available through the SWMB2C. If the steering wheel does not include a dedicated Voice Assistant button, the answer button functions as phone support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Custom Button Remapping Available: The SWMB2C supports optional custom button remapping to customise the steering wheel control button configuration. Remapping requires a USB-C cable (sold separately). Not Suitable for OEM Amplified Vehicles: The SWMB2C is not suitable for Citroen, Mitsubishi, or Peugeot vehicles fitted with OEM amplified sound systems. Use the Aerpro Vehicle Selector to confirm compatibility with your specific vehicle before purchase. Compatible with Aerpro APP8 Secondary ISO Harness: The SWMB2C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWMB2C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWMB2C Brand Aerpro Compatible Vehicles Citroen Various Models, Mitsubishi Various Models, Peugeot Various Models Interface Type Analogue Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes OEM AUX Input Retention Yes (aftermarket head unit requires rear RCA AUX input) OEM Amplified System Not suitable Reverse Trigger Output No Park Brake Output No Speed Pulse Output No Illumination Output No Amp Remote Output No Custom Button Remapping Yes (USB-C cable required, sold separately) Sony Head Unit Note Answer button = Mute, Hang Up button = Source Compatible Head Unit Brands (Phone Button) Alpine, Clarion, Kenwood, Pioneer, Zenec Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWMB2C is engineered for various Citroen, Mitsubishi, and Peugeot vehicles without OEM amplified sound systems. It is not suitable for vehicles with OEM amplified systems. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWMB2C require cutting of the factory wiring harness? No. The SWMB2C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Is a SWC patch lead included with the SWMB2C? No. A steering wheel control patch lead is required to use the SWMB2C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Does the SWMB2C retain the factory AUX input? Yes. The SWMB2C supports OEM AUX input retention when connected to a compatible aftermarket head unit with a rear RCA AUX input. Is the SWMB2C compatible with Sony aftermarket head units for phone button functions? Partially. On Sony head units, the phone button functions are remapped: the Answer button functions as Mute and the Hang Up button functions as Source. Full phone button support is available on Alpine, Clarion, Kenwood, Pioneer, and Zenec head units. Is the SWMB2C suitable for vehicles with an OEM amplified sound system? No. The SWMB2C is not suitable for Citroen, Mitsubishi, or Peugeot vehicles fitted with OEM amplified sound systems. Use the Aerpro Vehicle Selector to confirm whether your specific vehicle has an OEM amplified system before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWSU3C Steering Wheel Control Interface Subaru Various Models An analogue steering wheel control interface engineered for various Subaru vehicles, the SWSU3C allows factory steering wheel controls to operate with a compatible aftermarket head unit using a vehicle-specific plug connection that requires no cutting of the factory wiring harness. Product Overview The Aerpro SWSU3C is an analogue steering wheel control interface designed for various Subaru vehicles. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWSU3C is compatible with SW-type patch leads (sold separately) and supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit. Voice Assistant support is also available; if the steering wheel controls do not include a dedicated Voice Assistant button, the answer button functions as voice support instead, provided the aftermarket head unit and paired phone also support the Voice Assistant feature. Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWSU3C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWSU3C interface. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. The SWSU3C is not compatible with listed Subaru models that have factory-fitted navigation head units. The SWSU3C does not suit all Foresters between 2013-2014; some vehicles require the SWSU7C due to factory stereo differences and OEM plug configuration. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWSU3C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. Vehicle-Specific Plug - No Wire Cutting Required: The SWSU3C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. Analogue Interface Type: The SWSU3C uses an analogue interface type, compatible with the steering wheel control signal architecture used in the supported Subaru vehicles. OEM Phone Button Support: The SWSU3C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Voice Assistant Support: Voice Assistant support is available through the SWSU3C. If the steering wheel does not include a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Custom Button Remapping Available: The SWSU3C supports optional custom button remapping to customise the steering wheel control button configuration. Remapping requires a USB-C cable (sold separately). Compatible with Aerpro APP8 Secondary ISO Harness: The SWSU3C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWSU3C interface for a simplified and complete installation. Not Compatible with Factory Navigation Head Units: The SWSU3C is not compatible with listed Subaru models that have a factory-fitted navigation head unit. Use the Aerpro Vehicle Selector to confirm compatibility with your specific vehicle before purchase. Technical Specs Specification Detail SKU SWSU3C Brand Aerpro Compatible Vehicles Subaru Various Models Interface Type Analogue Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes Reverse Trigger Output No Park Brake Output No Speed Pulse Output No Illumination Output No Amp Remote Output No Telephone Mute Output No OEM Amplified System Retention No Custom Button Remapping Yes (USB-C cable required, sold separately) Factory Nav Compatibility Not compatible with factory navigation head unit models Forester 2013-2014 Note Not all Foresters 2013-2014 compatible - some require SWSU7C Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWSU3C is engineered for various Subaru vehicles. It is not compatible with listed Subaru models fitted with factory navigation head units. The SWSU3C does not suit all Subaru Foresters between 2013-2014; some of these vehicles require the SWSU7C due to factory stereo differences and OEM plug configuration. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWSU3C require cutting of the factory wiring harness? No. The SWSU3C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Is a SWC patch lead included with the SWSU3C? No. A steering wheel control patch lead is required to use the SWSU3C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Is the SWSU3C compatible with Subaru models that have factory navigation? No. The SWSU3C is not compatible with listed Subaru models fitted with factory navigation head units. Confirm whether your specific vehicle has factory navigation before purchase. Does the SWSU3C suit all Subaru Foresters from 2013-2014? No. The SWSU3C does not suit all Forester models between 2013-2014. Some vehicles in this range require the SWSU7C due to factory stereo differences and OEM plug configuration. Use the Aerpro Vehicle Selector to confirm the correct interface for your specific Forester before purchase. What is the Aerpro APP8 and is it required? The Aerpro APP8 is a Headunit Secondary ISO Harness that connects between the aftermarket head unit and the SWSU3C steering wheel control interface. It is recommended for installation but sold separately. Using the APP8 simplifies the wiring connection between the head unit and the SWSU3C interface.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Designed For Vehicles Without A Factory Camera Input! Camera Add-On Interface The Aerpro APVMC22 allows you to add on an aftermarket camera whilst retaining the use of your factory head unit on various Mercedes A-Class and Sprinter models. This system is specifically designed for use on vehicles without a factory camera input and can support not one but two camera inputs for front and rear-view vision. Following the simple installation process, the camera image can be automatically viewed via reverse gear or manually through the vehicle's controls. Please Note: Camera Add-On Interfaces vary between vehicle models, to find the correct part for your vehicle use the Aerpro Vehicle Selector. Suitable for listed Mercedes Vehicles with 7-inch screens and NTG 6 systems. Features: Allows aftermarket cameras to be displayed on the factory screen in the vehicle Two camera inputs for front and rear-view vision Dynamic guidelines display when the rear camera input is activated Factory head unit integration for listed vehicles with NTG 6 systems with 7-inch displays Designed for vehicles without a factory camera input Simple to install and use Specifications: Interface Type: Camera Add-On Video Inputs: Two Inputs (Automatic Trigger) Parking Guidelines: Dynamic Lines On Rear Camera 0Input Vehicle Compatibility: Mercedes Sprinter (2018 - 2020) Weight: 0.39kg Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

All in One Radio Replacement & SWC Interface RadioPRO4 The innovative new RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation. Features: Retains Steering Wheel Controls (Pre-Programmed)Data Controlled Accessory & Navigation Outputs.Retains Factory Parking Sensors (Where Fitted)Retains Warning Chimes (Including Front Collision Detection)Retains Factory Vehicle Menu Options Like Date & Time (Where Applicable) Note: Does Not Retain iDRIVE Visual Display In Vehicles. Additional Information: Plug & Play: Yes – Factory Connector To ISORetains Factory Amplifier: No Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWTO31C SWC Interface Toyota Various Models with OEM Amplifier Retain your factory steering wheel controls, OEM amplifier, USB, AUX, and reverse camera when upgrading to an aftermarket head unit in select Toyota vehicles from 2020-on with amplified OEM audio systems. Product Overview The SWTO31C is Aerpro's CANbus steering wheel control interface, engineered for various Toyota vehicles from 2020-on equipped with OEM amplified systems and factory reverse cameras. It allows the factory steering wheel audio control buttons to operate correctly with a compatible aftermarket head unit while simultaneously retaining the OEM amplifier, OEM AUX input, OEM USB input, and factory reverse camera functionality (excluding 360-degree cameras). The interface uses CANbus integration and requires no additional modules, connecting directly to the existing factory wiring via a vehicle-specific plug without cutting or modifying the original harness. Installation is further simplified when paired with the optional Aerpro APP8 Headunit Secondary ISO Harness, which connects between the aftermarket head unit and the SWTO31C interface. The SWTO31C provides output feeds for reverse trigger (Purple/White wire), park brake (Green wire), and speed pulse (Pink wire), supporting a wide range of aftermarket head unit installation requirements. OEM phone button functionality is supported when connected to compatible aftermarket Bluetooth head units. Note that for amplified vehicles, fade control is not supported through this interface. The aftermarket head unit must be SWC compatible, and steering wheel control functions may vary from the original OEM button assignments. Features & Benefits Retains Factory Steering Wheel Controls: The SWTO31C allows the factory steering wheel audio control buttons to operate with a compatible aftermarket head unit, preserving the OEM functionality that would otherwise be lost during a head unit upgrade and improving driver safety by keeping hands on the wheel. Retains OEM Amplifier: The OEM amplifier is retained in the signal chain, preserving factory speaker output through the existing speaker wiring. Note that fade control is not supported through this interface on amplified vehicles. Retains OEM Reverse Camera: The factory reverse camera is retained and enabled to display on a compatible aftermarket AV head unit with an RCA camera input. 360-degree camera systems are not supported. Retains OEM USB and AUX Inputs: Factory USB and AUX inputs (where equipped) are retained when connected to compatible aftermarket head units with matching rear USB and AUX inputs. OEM Phone Button Support: The OEM phone button on the steering wheel is supported when the SWTO31C is connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel. CANbus Integration, No Additional Modules Required: The SWTO31C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules, simplifying installation and reducing component count. Reverse Trigger, Park Brake, and Speed Pulse Outputs: Dedicated output wires for reverse trigger (Purple/White), park brake (Green), and speed pulse (Pink) support the full range of aftermarket head unit installation requirements in one interface. Vehicle-Specific Plug, No Wire Cutting Required: The interface is fitted with a vehicle-specific connector that plugs directly into the existing factory wiring without cutting or splicing the original harness, simplifying both installation and future removal. Recommended for Use with Aerpro APP8 Harness: Installation is simplified when paired with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO31C for a clean, integrated wiring solution. Technical Specs Specification Detail SKU SWTO31C Brand Aerpro Interface Type CANbus Patch Lead Type SW Compatible Vehicles Toyota Various Models, 2020-on (with OEM amplified system) Phone Button Compatibility Yes Voice Assistant Button Support No Reverse Trigger Output Yes (Purple/White wire) Park Brake Output Yes (Green wire) Speed Pulse Output Yes (Pink wire) OEM Amplified System Retention Yes (fade not supported) OEM USB Retention Yes (if equipped) OEM AUX Retention Yes (if equipped) OEM Reverse Camera Retention Yes (excludes 360-degree cameras) Compatible With The SWTO31C is designed for various Toyota vehicles from 2020-on with OEM amplified systems and factory reverse cameras. Steering wheel control interfaces vary between models. Use the Aerpro Vehicle Selector at aerpro.com to confirm the correct part number for your specific Toyota model, build date, and OEM audio system before purchase. Frequently Asked Questions What OEM features does the SWTO31C retain when upgrading to an aftermarket head unit? The SWTO31C retains factory steering wheel audio controls, the OEM amplifier, OEM USB input (if equipped), OEM AUX input (if equipped), and the factory reverse camera (excluding 360-degree camera systems). All retained features require connection to a compatible aftermarket head unit with the appropriate inputs and SWC compatibility. Fade control is not supported on amplified vehicles. Does the SWTO31C support the factory phone button on the steering wheel? Yes. The SWTO31C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel without additional hardware. Will the factory reverse camera work with an aftermarket head unit using the SWTO31C? Yes, provided the aftermarket head unit has an RCA reverse camera input. The SWTO31C retains and passes through the factory reverse camera signal to a compatible aftermarket AV head unit. 360-degree camera systems are not supported by this interface. Is the SWTO31C compatible with all Toyota vehicles from 2020-on? The SWTO31C is designed for various Toyota vehicles from 2020-on with OEM amplified systems. Not all Toyota models use the same wiring configuration, so compatibility varies between specific models and build dates. Use the Aerpro Vehicle Selector at aerpro.com to confirm the correct interface for your specific vehicle before purchase. Does the SWTO31C require additional CANbus modules to function? No. The SWTO31C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules. All necessary CANbus decoding is handled within the interface itself, simplifying installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWTO30C SWC Interface Toyota Various Models with OEM Amplifier Retain your factory steering wheel controls, OEM amplifier, USB, AUX, and reverse camera when upgrading to an aftermarket head unit in select Toyota vehicles from 2015-2020 with amplified OEM audio systems. Product Overview The SWTO30C is Aerpro's CANbus steering wheel control interface, engineered for various Toyota vehicles from 2015-2020 equipped with OEM amplified systems and factory reverse cameras. It allows the factory steering wheel audio control buttons to operate correctly with a compatible aftermarket head unit while simultaneously retaining the OEM amplifier, OEM AUX input, OEM USB input, and factory reverse camera functionality (excluding 360-degree cameras). The interface uses CANbus integration and requires no additional modules, connecting directly to the existing factory wiring via a vehicle-specific plug without cutting or modifying the original harness. Installation is further simplified when paired with the optional Aerpro APP8 Headunit Secondary ISO Harness, which connects between the aftermarket head unit and the SWTO30C interface. The SWTO30C provides output feeds for reverse trigger (Purple/White wire), park brake (Green wire), and speed pulse (Pink wire), supporting a wide range of aftermarket head unit installation requirements. OEM phone button functionality is supported when connected to compatible aftermarket Bluetooth head units. Note that for amplified vehicles, fade control is not supported through this interface. The aftermarket head unit must be SWC compatible, and steering wheel control functions may vary from the original OEM button assignments. Features & Benefits Retains Factory Steering Wheel Controls: The SWTO30C allows the factory steering wheel audio control buttons to operate with a compatible aftermarket head unit, preserving the OEM functionality that would otherwise be lost during a head unit upgrade and improving driver safety by keeping hands on the wheel. Retains OEM Amplifier: The OEM amplifier is retained in the signal chain, preserving factory speaker output through the existing speaker wiring. Note that fade control is not supported through this interface on amplified vehicles. Retains OEM Reverse Camera: The factory reverse camera is retained and enabled to display on a compatible aftermarket AV head unit with an RCA camera input. 360-degree camera systems are not supported. Retains OEM USB and AUX Inputs: Factory USB and AUX inputs (where equipped) are retained when connected to compatible aftermarket head units with matching rear USB and AUX inputs. OEM Phone Button Support: The OEM phone button on the steering wheel is supported when the SWTO30C is connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel. CANbus Integration, No Additional Modules Required: The SWTO30C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules, simplifying installation and reducing component count. Reverse Trigger, Park Brake, and Speed Pulse Outputs: Dedicated output wires for reverse trigger (Purple/White), park brake (Green), and speed pulse (Pink) support the full range of aftermarket head unit installation requirements in one interface. Vehicle-Specific Plug, No Wire Cutting Required: The interface is fitted with a vehicle-specific connector that plugs directly into the existing factory wiring without cutting or splicing the original harness, simplifying both installation and future removal. Recommended for Use with Aerpro APP8 Harness: Installation is simplified when paired with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO30C for a clean, integrated wiring solution. Technical Specs Specification Detail SKU SWTO30C Brand Aerpro Interface Type CANbus Patch Lead Type SW Compatible Vehicles Toyota Various Models, 2015-2020 (with OEM amplified system) Phone Button Compatibility Yes Voice Assistant Button Support No Reverse Trigger Output Yes (Purple/White wire) Park Brake Output Yes (Green wire) Speed Pulse Output Yes (Pink wire) OEM Amplified System Retention Yes (fade not supported) OEM USB Retention Yes (if equipped) OEM AUX Retention Yes (if equipped) OEM Reverse Camera Retention Yes (excludes 360-degree cameras) Compatible With The SWTO30C is designed for various Toyota vehicles from 2015-2020 with OEM amplified systems and factory reverse cameras. Steering wheel control interfaces vary between models. Use the Aerpro Vehicle Selector at aerpro.com to confirm the correct part number for your specific Toyota model, build date, and OEM audio system before purchase. For Toyota vehicles from 2020-on with equivalent OEM amplified systems, the SWTO31C is the correct alternative. Frequently Asked Questions What is the difference between the SWTO30C and the SWTO31C? Both interfaces are CANbus steering wheel control interfaces for Toyota vehicles with OEM amplified systems, sharing the same specification, retained features, and output wires. The SWTO30C is engineered for Toyota vehicles from 2015-2020, while the SWTO31C is engineered for Toyota vehicles from 2020-on. The factory wiring and CANbus configuration differ between these production periods, so confirm your vehicle's build date using the Aerpro Vehicle Selector before purchase. What OEM features does the SWTO30C retain when upgrading to an aftermarket head unit? The SWTO30C retains factory steering wheel audio controls, the OEM amplifier, OEM USB input (if equipped), OEM AUX input (if equipped), and the factory reverse camera (excluding 360-degree camera systems). All retained features require connection to a compatible aftermarket head unit with the appropriate inputs and SWC compatibility. Fade control is not supported on amplified vehicles. Does the SWTO30C support the factory phone button on the steering wheel? Yes. The SWTO30C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel without additional hardware. Will the factory reverse camera work with an aftermarket head unit using the SWTO30C? Yes, provided the aftermarket head unit has an RCA reverse camera input. The SWTO30C retains and passes through the factory reverse camera signal to a compatible aftermarket AV head unit. 360-degree camera systems are not supported by this interface. Does the SWTO30C require additional CANbus modules to function? No. The SWTO30C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules. All necessary CANbus decoding is handled within the interface itself, simplifying installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

An All in One Radio Replacement & SWC Interface RadioPRO4The innovative new RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation. Features: Retains Steering Wheel Controls (Pre-Programmed) Data Controlled Accessory & Navigation Outputs. Retains Factory Parking Sensors (Where Fitted) Retains Warning Chimes (Including Front Collision Detection) Retains Factory Vehicle Menu Options Like Date & Time (Where Applicable) Compatibility Notes: Incompatible With Vehicles Equipped With The Upper Display Screen (Above Radio) (CCC Or CIC systems). This Screen Is Not Retained if The Radio Is Removed, & The Owner Will Lose the Ability To Adjust Some Vehicle Settings. Radio Replacement Is Not Recommended For Those Applications. Does Not Retain Amplifiers Equipped With A Fibre-Optic Input. Due To Lack Of A True 12 Volt Battery Lead At The Radio Opening, It Is Necessary To Run a Wire (Wire Is Included) To The Battery (Located In The Trunk) Additional Information: Plug & Play: Yes – Factory Connector To ISO Retains Factory Amplifier: No Vehicle Compatibility: BMW 1 Series (Incl. M1) 2004 - 2013 BMW 3 Series (Incl. M3) 2005 - 2014 BMW 5 Series (Incl. M5) 2004 - 2011 BMW 7 Series 2008 - 2013 BMW Mini 2007 - 2013 BMW X1 2009 - 2015 BMW Z4 2009 - 2016 Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Keep Your Steering Wheel Controls When You Upgrade Your Head Unit The Aerpro SWSZ3C is a plug-and-play steering wheel control (SWC) interface engineered specifically for various Suzuki vehicles. It bridges your factory steering wheel controls with an aftermarket head unit — so you don't lose the convenience of volume, track, and phone controls when you upgrade your in-car entertainment. Designed with the installer in mind, the SWSZ3C uses a vehicle-specific plug that connects directly into your Suzuki's existing wiring loom. There's no cutting of the factory harness required. The analogue interface supports OEM phone button and voice assistant button functionality when paired with a compatible Bluetooth-enabled aftermarket head unit, making it one of the most complete SWC interfaces available for Suzuki applications. For an even cleaner install, it pairs directly with the Aerpro APP8 Secondary ISO Harness (sold separately). Please note: SWC interfaces vary between Suzuki models. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle. Aftermarket head unit must be SWC compatible. Steering wheel control functions may vary from OEM factory functions. Key Specifications Interface type: Analogue Patch lead type: SW Phone button compatibility: Yes Voice assistant button support: Yes Speed pulse output: Yes (Pink wire) Reverse trigger output: No Park brake output: No Illumination output: No Amp remote output: No Telephone mute output: No OEM amplified system retention: No Custom button remapping: Available (requires USB-C cable, sold separately) Compatible harness: Aerpro APP8 Secondary ISO Harness (sold separately) Barcode: 9317114945112 Features & Benefits Retain your factory steering wheel controls — Control volume, tracks, and calls without taking your hands off the wheel or eyes off the road, improving driver safety on every drive. Phone button support — The SWSZ3C supports the OEM phone button on the steering wheel when connected to a compatible Bluetooth aftermarket head unit, keeping hands-free calling seamless. Voice assistant button support — Activate your head unit's voice assistant directly from the steering wheel for safer, smarter in-car interaction. No cutting required — The vehicle-specific plug connects directly into your Suzuki's existing wiring loom. Factory wiring stays intact — great for resale value and peace of mind. Speed pulse output (Pink) — Feeds vehicle speed data to compatible aftermarket head units for GPS accuracy and speed-dependent volume functions. Custom button remapping — Remap your steering wheel buttons to suit your preferred head unit functions using a USB-C cable (sold separately). Ideal for users whose factory button layout doesn't align with the aftermarket head unit's defaults. Simplified installation with APP8 — Pairs directly with the Aerpro APP8 Headunit Secondary ISO Harness, reducing wiring complexity and installation time. Analogue interface — Straightforward compatibility with a wide range of SWC-compatible aftermarket head units. Technical Specs Interface type: Analogue Patch lead type: SW Phone button compatibility: Yes Voice assistant button support: Yes Speed pulse: Yes — Pink wire Reverse trigger: No Park brake output: No Illumination output: No Amp remote output: No Telephone mute output: No OEM amplified system retention: No Custom remapping: Yes (USB-C cable required, sold separately) Packaging inner/outer: 1 inner / 40 outer Barcode (EAN): 9317114945112 Compatible With Various Suzuki vehicles (with or without OEM phone button on steering wheel) Use the Aerpro Vehicle Selector to confirm fitment for your specific Suzuki model and year Compatible with SWC-capable aftermarket head units (analogue SWC input required) Aerpro APP8 Secondary ISO Harness (recommended companion harness, sold separately) USB-C cable required for custom button remapping (sold separately) Frequently Asked Questions Will the SWSZ3C work with my Suzuki? Compatibility varies between Suzuki models. Use the Aerpro Vehicle Selector on the Aerpro website to confirm the SWSZ3C suits your specific vehicle before purchasing. Do I need to cut any factory wiring to install this? No. The SWSZ3C uses a vehicle-specific plug that connects directly into your Suzuki's existing wiring loom — no cutting or splicing of factory wires is required. Does this interface support the phone button on my steering wheel? Yes. The SWSZ3C supports the OEM phone button when connected to a compatible Bluetooth-enabled aftermarket head unit. Can I remap the steering wheel control buttons? Yes. Custom button remapping is available and requires a USB-C cable (sold separately). Refer to the Aerpro remapping instructions for the programming process. Does my aftermarket head unit need to be SWC compatible? Yes. Your aftermarket head unit must support steering wheel control input (analogue type) for this interface to function. SWC functions may also vary from your original OEM setup. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Metra 40-TY22 Antenna Adapter to Female DIN for 2022-2025 Toyota Vehicle-specific antenna adapter cable engineered for 2022-2025 Toyota models, converting the factory OE antenna connector to a female Motorola DIN connection for seamless compatibility with aftermarket radios. Product Overview The Metra 40-TY22 is a vehicle-specific antenna adapter designed to bridge the factory antenna connector in late-model Toyota vehicles to the standard female Motorola DIN input found on aftermarket head units. When upgrading to an aftermarket radio, the factory antenna plug on these Toyota models does not connect directly to the aftermarket unit without an adapter. The 40-TY22 resolves this with a clean plug-and-play solution, featuring the correct OE connector on one end and a female Motorola connector on the other. A blue antenna turn-on lead is attached to the adapter cable, which connects to the aftermarket radio's antenna turn-on wire to ensure the antenna amplifier activates correctly when the radio is in use. Compatible with a range of current-generation Toyota models including the Corolla E210, Kluger XU70, LandCruiser 300 Series, LandCruiser Prado 250 Series, RAV4 XA50, and Tundra 3rd Gen. Always verify your specific vehicle's application before purchasing. Features & Benefits OE to Female Motorola DIN Conversion Converts the factory Toyota antenna connector to the standard female Motorola DIN format used by aftermarket head units, ensuring correct antenna signal routing without modification to factory wiring. Integrated Antenna Turn-On Lead A blue wire is included on the adapter that connects to the antenna turn-on lead of the aftermarket radio, activating the factory antenna amplifier automatically whenever the radio is powered on. Plug-and-Play Installation Designed for a direct plug-in connection to the vehicle's factory antenna wiring, requiring no cutting, splicing, or modification to the original harness. Broad Late-Model Toyota Compatibility Covers multiple current-generation Toyota platforms produced from 2021 onwards, including Corolla, Kluger, LandCruiser, LandCruiser Prado, RAV4, and Tundra variants. Metra Quality Metra Electronics is a globally recognised manufacturer of vehicle-specific installation accessories, trusted by professional installers for accurate fitment and reliable electrical performance. Technical Specs Specification Details Brand Metra Part Number 40-TY22 Product Type Antenna Adapter Cable Connector End 1 OE Toyota Factory Connector Connector End 2 Female Motorola DIN Connector Antenna Turn-On Lead Yes (blue wire included) Vehicle Application 2021-2025 Toyota (multiple models, see compatibility table) Compatible With / Goes Well With The Metra 40-TY22 is compatible with the following vehicles: Make Model Year / Series Toyota Corolla 2023-2025 (E210 Series) Toyota Kluger 2023-2025 (XU70 Series) Toyota LandCruiser 2021-2024 (300 Series) Toyota LandCruiser Prado 2024-2025 (250 Series) Toyota RAV4 2023-2025 (XA50 Series) Toyota Tundra 2021-2025 (3rd Gen) Goes Well With: Aftermarket headunit harness adapter for Toyota models listed above Factory steering wheel control interface for Toyota models listed above Factory reverse camera retention harness for Toyota models listed above 9-inch trapezoid or double DIN aftermarket head unit Frequently Asked Questions Why do I need an antenna adapter when installing an aftermarket head unit? Late-model Toyota vehicles use a factory-specific OE antenna connector that does not physically match the standard female Motorola DIN input found on aftermarket head units. Without the 40-TY22 adapter, the factory antenna cable cannot connect to the aftermarket radio, which means you would lose AM and FM radio reception entirely. The adapter bridges this connector difference with a clean, plug-and-play solution. What does the blue wire on the 40-TY22 do? The blue wire is an antenna turn-on lead. It connects to the antenna turn-on wire on your aftermarket head unit and signals the factory antenna amplifier to activate whenever the radio is switched on. Without this connection, the antenna amplifier may not engage, resulting in poor or no radio reception even with the adapter fitted. Is the 40-TY22 compatible with my Toyota model? The 40-TY22 covers the Toyota Corolla E210 (2023-2025), Kluger XU70 (2023-2025), LandCruiser 300 Series (2021-2024), LandCruiser Prado 250 Series (2024-2025), RAV4 XA50 (2023-2025), and Tundra 3rd Gen (2021-2025). Always confirm your vehicle's build year and model variant against the application guide before purchasing. Does this adapter work with any aftermarket head unit? The 40-TY22 outputs a standard female Motorola DIN connection, which is the most common antenna input format on aftermarket head units. It is compatible with the vast majority of aftermarket radios available in the Australian market. Confirm your chosen head unit accepts a male Motorola DIN antenna plug before purchasing. Do I need any other adapters or accessories for a complete head unit installation? The 40-TY22 covers the antenna connection only. A complete aftermarket head unit installation for these Toyota models will also typically require a vehicle-specific wiring harness, steering wheel control interface, and may require a reverse camera retention harness depending on factory equipment. We recommend consulting a qualified car audio installer to identify all required accessories for your specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less