Description
ADR 48/00-Compliant LED Licence Plate Lamp with Steel Housing 12V or 24V, IP67, Ultra-Low Draw
Product Overview
The LED Autolamps 6434BWM is a multi-voltage LED licence plate lamp with a black steel housing, rated IP67 and compliant with ADR 48/00 the Australian Design Rule governing devices for illuminating rear registration plates on motor vehicles and trailers. It operates across a 12–24V range, making it suitable for both light vehicle and heavy vehicle applications without any modification.
Measuring 65mm x 30mm x 24mm with a 65mm centre-to-centre mounting pitch and a 140mm pigtail cable, the 6434BWM draws just 0.02A at 13.8V an extremely low current load that keeps heat and battery impact to a minimum. Surface mount fitting and no-fuss cable connection make installation straightforward on trailers, caravans, horse floats, and commercial vehicles.
Features & Benefits
-
ADR 48/00 compliant — meets the Australian Design Rule for rear registration plate illumination; road-legal for use on trailers and vehicles in Australia when two units are fitted
-
Two required for ADR compliance — sold as a single unit; order two for a compliant installation
-
12–24V multi-volt operation — works across the full 12V to 24V range without modification, covering light trailers through to heavy commercial and agricultural vehicles
-
IP67 rated — fully sealed against dust and protected against temporary water immersion; handles boat ramp submersion, pressure washing, and harsh outdoor exposure
-
Steel housing with black base — robust construction that withstands the physical knocks and vibration typical of trailer and caravan use; black finish suits most standard trailer configurations
-
Ultra-low current draw — 0.02A @ 13.8V — negligible load on the trailer wiring circuit; contributes minimal heat and virtually no impact on vehicle electrical systems
-
65mm centre-to-centre mounting — compact footprint that suits standard licence plate lamp mounting positions on trailers and caravans
-
140mm pigtail cable — short cable stub for direct connection to the trailer wiring loom; no excess cable management required
-
5-year warranty — LED Autolamps' standard warranty on this lamp
Technical Specs
| Specification |
Detail |
| SKU |
6434BWM |
| Light type |
LED |
| Housing colour |
Black |
| Housing material |
Steel |
| Voltage range |
12–24V |
| Current draw |
0.02A @ 13.8V |
| IP rating |
IP67 |
| ADR compliance |
ADR 48/00 |
| Size |
65mm (L) x 30mm (W) x 24mm (H) |
| Mount centre to centre |
65mm |
| Mount type |
Surface mount |
| Cable (connector) |
0.14m (140mm) pigtail |
| Units per pack |
1 (each) |
| ADR compliant qty |
2 required per vehicle/trailer |
| Weight |
0.1kg |
| Warranty |
5 years |
Compatible With / Goes Well With
- Trailers, caravans, horse floats, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination
- 12V and 24V electrical systems (multi-volt, no modification required)
- Suits standard trailer licence plate lamp mounting positions with 65mm centre-to-centre spacing
- Pairs with LED Autolamps trailer lamp and wiring harness range for a complete trailer lighting solution
Weight
0.1kg (per unit)
Frequently Asked Questions
Do I need to buy two of these?
Yes — ADR 48/00 requires two licence plate lamps for a compliant installation. The 6434BWM is sold individually, so add two to your order for a road-legal result.
What is ADR 48/00?
ADR 48/00 is the Australian Design Rule that sets the requirements for devices used to illuminate rear registration plates on motor vehicles and trailers. Compliance with this rule is required for road-legal trailer and vehicle builds in Australia.
Will it work on a 24V truck or heavy trailer?
Yes — the 6434BWM operates across 12–24V without any modification, making it suitable for both light trailers and 24V heavy vehicle applications.
What does IP67 mean for a licence plate lamp?
IP67 means the lamp is fully sealed against dust ingress and protected against temporary submersion in water up to 1 metre deep — important for trailers that encounter boat ramps, flooding, or high-pressure washing.
What cable is included for wiring?
The lamp includes a 140mm (0.14m) pigtail cable for direct connection to the trailer wiring loom. No additional cable extensions are included.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
