Description
Oricom IP54 Dual Receiver Controller Speaker Mic UHF CB Radio: Built Off the Success of the DTX Range of Dual Receive UHF CB Radios
The NEW DTX4200XP is the ultimate in Australian UHF CB Radio technology. The dual receive function lets you receive and listen to two different channels simultaneously without installing two UHF CB Radios. This product now includes the MMM100 Magnetic Microphone Mounting Bracket.
Oricom DTX4200XP Features:
- Ergonomic, professional-grade controller speaker microphone
- IP54 Dust and splash resistant
- Loud and clear audio with a speaker in the microphone and the transceiver
- It is easy to see the extra large backlit display
- Intuitive jog wheel to access primary functions
- Heavy-duty die-cast metal chassis
- 3 memory groups of 16 channels per group
- Large 96 multi-colour backlit display
- Backlight brightness (5 pre-set levels plus auto)
- Fast scanning 80 channels within 3 seconds
- Jog wheel volume/channel and squelch control
- Duplex
- 38 CTCSS & 104 DCS codes
- Transmit power indicator
- Slide-in mounting bracket
- Auto power off (off/1h/2h/4h)
- 3.5mm external jack (for optional external speaker)
- Included in the pack; are a 2m microphone extension cable and mounting hardware
- Requires UHF CB Antenna (not supplied)
- Transceiver Dimensions (31mm x 128mm x 147mm)
Oricom DTX4200XP Specifications:
- Compliance AS/NZS 4365:2011
- Frequency Range TX/RX 476.425 - 477.4125 MHz
- Number of TX/RX Channels 80 UHF CB Channels (75 voice)
- Channel Spacing TX/RX 12.5KHz
- Operating modes Simplex, Repeater TX offset (+750KHz)
- Scanning Speed 50 msec per channel
- Antenna Impedance 50 Ohms
- Operating Volts nominal 13.8VDC
- Operating Volts Range 10 to 15VDC
- Over Voltage Protection Diode and Voltage regulator system
- Over Current Protection 2 AMP fuse
- Reverse Polarity Protection Shunt diode
- Frequency stability +/- 5 ppm
TRANSMITTER:
- RF Output Power 5 watts max
- Modulation F3E(FM)
- Maximum deviation 2.5KHz
- Spurious Emissions < -30dBm
- TX Audio pre-emphasis +6dB/Octave from 300Hz to 3KHz
- Current consumption is 1.7 AMP with 50 ohm
- during TX antenna termination
RECEIVER:
- Circuit Type Dual conversion superheterodyne
- Intermediate Frequencies 1st IF : 21.4MHz , 2nd IF : 450KHz for Main RX 1st IF : 38.85MHz, 2nd IF : 455KHz for Sub RX
- Receiver sensitivity -123dBm for 12dB SINAD
- Audio output power >2 Watts at 8 ohm load
- RX Audio de-emphasis +6dB/Octave from 300Hz to 3KHz
- Signal to Noise Ratio >40dB
- Conducted Spurious Emission > -57dBm
MECHANICAL:
- Dimensions (H) X (W) X (D) 31 X 128 X 147
- Weight 548g transceiver 220g controller speaker mic
OPTIONAL ACCESSORIES:
- External speaker (P/N: SPE85)
- Magnetic mounting bracket (MMM100)
Legendary Products & Support From Authorized Dealers
When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
-
▸ Expert Knowledge & Training
Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
-
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
-
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
-
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized ORICOM dealer today!
