Description
Plug-and-Play LED Upgrade for HB4 Globe Fitments
Product Overview
The Roadvision RGHB4EFLED is a direct-fit LED upgrade designed to replace standard HB4 halogen globes without additional wiring or modules. Using the same connector and dimensions as the HB4 halogen globe it replaces, it installs straight into the factory harness no cutting, no adaptors, no rewiring required in most vehicles.
Each globe delivers 1,800 lumens at 13W with a 6000K white colour temperature and an OEM-matched beam pattern, producing more light on the road than a standard halogen bulb while reducing glare to oncoming traffic. Rated IP65 and operable from -40°C to +80°C (130°C max), it is built for demanding environments and suits both 12V and 24V vehicle systems. Note: this product is not ADR approved and is suitable for off-road use only. CANBUS modules may be required depending on vehicle confirm compatibility before purchasing.
Features & Benefits
-
Plug-and-play installation — same connector as the HB4 halogen globe it replaces; no additional wiring required in most applications
-
HB4 fitment — direct replacement for vehicles using HB4 (9006) halogen globes
-
1,800lm per globe — substantially more light than a standard halogen equivalent
-
13W power draw — efficient LED output with low current draw
-
6000K colour temperature — clean, bright white light for improved visibility
-
OEM matched beam pattern — precise light output reduces glare to oncoming traffic
-
IP65 rated — protected against dust ingress and low-pressure water jets
-
-40°C to +80°C operating range — reliable across extreme temperature conditions
-
12V–24V compatible — suits passenger vehicles, 4WDs, and light commercial vehicles
-
Off-road use only — not ADR approved for on-road use in Australia
Technical Specs
| Specification |
Detail |
| Part Number |
RGHB4EFLED |
| Brand |
Roadvision |
| Globe Fitment |
HB4 (9006) |
| Lumens |
1,800lm per globe |
| Power |
13W |
| Colour Temperature |
6000K |
| Voltage |
12–24V DC |
| Operating Temperature |
-40°C to +80°C (130°C max) |
| IP Rating |
IP65 |
| ADR Compliance |
Not ADR approved — off-road use only |
| CANBUS |
May require CANBUS module (vehicle dependent) |
Compatible With
Suitable for vehicles using HB4 (9006) halogen globes in low beam or fog light positions. Check your vehicle's owner manual or globe reference guide to confirm the correct fitment before purchasing.
Weight
Confirm with supplier.
Frequently Asked Questions
Is this globe kit legal for on-road use in Australia?
No. This product is not ADR (Australian Design Rules) approved and is suitable for off-road use only. It must not be used on public roads in Australia.
Do I need a CANBUS module to fit these globes?
It depends on your vehicle. Some modern vehicles with CANBUS electrical systems may generate error warnings or cause flickering when non-OEM globes are fitted. A CANBUS module may be required — confirm with your vehicle manufacturer or auto electrician before purchasing.
What vehicles use HB4 globes?
HB4 (also known as 9006) is a single-filament globe commonly used in low beam headlight and fog light positions across a range of passenger vehicles, SUVs, and 4WDs. Check your vehicle's owner manual or the reference on your existing globe to confirm the correct fitment.
What is the IP65 rating?
IP65 means the globe is fully protected against dust ingress and resistant to low-pressure water jets from any direction. This makes it suitable for off-road environments where the engine bay may be exposed to water, mud, and dust.
Are these a direct drop-in replacement with no wiring changes?
In most vehicles, yes — the globe uses the same connector as the HB4 halogen it replaces and installs directly into the factory harness. However, some vehicles may require a CANBUS module to prevent error codes or flickering. No cutting or rewiring of the factory harness is required.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
