Victron Energy BMS300200000 VE.Bus BMS

Description

Victron Energy VE.Bus BMS: Each Individual Cell Of A Lifepo4 Battery Must Be Protected Against Voltage, Voltage And Over-temperature

Victron LiFePO4 batteries have integrated Balancing, Temperature, and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets. The BTVs of several batteries can be daisy-chained. Up to five batteries can be paralleled and up to four batteries can be series connected (BTVs are simply daisy-chained) so that a 48V battery bank of up to 1500Ah can be assembled. Please see our LiFePO4 battery documentation for details.The BMS will:
  • shut down or disconnect loads in case of an imminent cell under voltage,
  • reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below), and
  • shut down or disconnect battery chargers in case of imminent cell overvoltage or over-temperature.
More Product Features:Protects 12V, 24V and 48V Systems:The operating voltage range of the BMS is 9 to 70V DC.Communicates with all VE.Bus productsThe VE.Bus BMS connects to a MultiPlus, Quattro, or Phoenix inverter with a standard RJ45 UTP cable. Other products, without VE.Bus can be controlled as shown below:Load Disconnect:The Load Disconnect output is normally high and becomes free-floating in case the cell goes under voltage. Maximum current: 2A.The Load Disconnect output can be used to control:
  • the remote on/off of a load, and/or
  • the remote on/off of an electronic load switch (Battery Protect)
Charge Disconnect:The Charge Disconnect output is normally high and becomes free-floating in case the cell goes under voltage or over temperature. Maximum current: 10mA.The Charge Disconnect output can be used to control:
  • the remote on/off of a charger and/or
  • a Cyrix-Li-Charge relay and/or
  • a Cyrix-Li-ct Battery Combiner
LED Indicators:
  • Enabled (blue): VE.Bus products are enabled.
  • Cell>4V or temperature (red): charge disconnect output low because the cell goes under voltage or over temperature.
  • Cell>2.8V (blue): load disconnect output high.
Victron Energy BMS300200000 Features:
  • Protects Each Cell in LiFePO or LFP Batteries
  • For 12,24 and 48V Systems
  • Includes AC Detector
  • LED Indicators
  • VE.Bus Communication

Legendary Products & Support From Authorized Dealers

When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

  • ▸ Expert Knowledge & Training

    Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

  • ▸ Authorized Warranty Protection:

    We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

  • ▸ Reliable Customer Support:

    If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

  • ▸ Protect Your Investment:

    Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

Choose wisely. Buy from an authorized Victron Energy dealer today!

Victron Energy BMS300200000 VE.Bus BMS

Product form

Victron Energy VE.Bus BMS: Each Individual Cell Of A Lifepo4 Battery Must Be Protected Against Voltage, Voltage And Over-temperature Victron... Read more

SKU: BMS300200000

  • In Stock

$198.99 $181.87 Incl. VAT

    Description

    Victron Energy VE.Bus BMS: Each Individual Cell Of A Lifepo4 Battery Must Be Protected Against Voltage, Voltage And Over-temperature

    Victron LiFePO4 batteries have integrated Balancing, Temperature, and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets. The BTVs of several batteries can be daisy-chained. Up to five batteries can be paralleled and up to four batteries can be series connected (BTVs are simply daisy-chained) so that a 48V battery bank of up to 1500Ah can be assembled. Please see our LiFePO4 battery documentation for details.The BMS will:
    • shut down or disconnect loads in case of an imminent cell under voltage,
    • reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below), and
    • shut down or disconnect battery chargers in case of imminent cell overvoltage or over-temperature.
    More Product Features:Protects 12V, 24V and 48V Systems:The operating voltage range of the BMS is 9 to 70V DC.Communicates with all VE.Bus productsThe VE.Bus BMS connects to a MultiPlus, Quattro, or Phoenix inverter with a standard RJ45 UTP cable. Other products, without VE.Bus can be controlled as shown below:Load Disconnect:The Load Disconnect output is normally high and becomes free-floating in case the cell goes under voltage. Maximum current: 2A.The Load Disconnect output can be used to control:
    • the remote on/off of a load, and/or
    • the remote on/off of an electronic load switch (Battery Protect)
    Charge Disconnect:The Charge Disconnect output is normally high and becomes free-floating in case the cell goes under voltage or over temperature. Maximum current: 10mA.The Charge Disconnect output can be used to control:
    • the remote on/off of a charger and/or
    • a Cyrix-Li-Charge relay and/or
    • a Cyrix-Li-ct Battery Combiner
    LED Indicators:
    • Enabled (blue): VE.Bus products are enabled.
    • Cell>4V or temperature (red): charge disconnect output low because the cell goes under voltage or over temperature.
    • Cell>2.8V (blue): load disconnect output high.
    Victron Energy BMS300200000 Features:
    • Protects Each Cell in LiFePO or LFP Batteries
    • For 12,24 and 48V Systems
    • Includes AC Detector
    • LED Indicators
    • VE.Bus Communication

    Legendary Products & Support From Authorized Dealers

    When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

    • ▸ Expert Knowledge & Training

      Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

    • ▸ Authorized Warranty Protection:

      We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

    • ▸ Reliable Customer Support:

      If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

    • ▸ Protect Your Investment:

      Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

    Choose wisely. Buy from an authorized Victron Energy dealer today!

    Recently viewed products

    Footer image

    © 2025 Frankies BrandBeast

      • Visa
      • Mastercard
      • American Express
      • Zip
      • PayPal

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      Sign up for our newsletter

      Subscribe to our emails