Victron Energy BPR110022000 Smart BatteryProtect 12/24V 100A

Description

Victron Energy Smart BatteryProtect 12/24V 100A: The Battery Protection From Victron Energy Have Been Designed to Be a True World-wide Product

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which woulddamage the battery) or before it has insufficient power left to crank the engine.The Smart BatteryProtect can also be used as a system on/off switch. See manual for details.Bluetooth: programming made easyWhen using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).If required, Bluetooth can be disabled.A special setting for Li-ion batteriesIn this mode the Battery Protect can be controlled by the VE.Bus BMS.Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connectiondiagram in the manual.Ultra-low current consumptionThis is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.Over voltage protectionTo prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.Ignition proofNo relays but MOSFET switches, and therefore no sparks.Delayed alarm outputThe alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Startingthe engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative(minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.Delayed load disconnect and delayed reconnectThe load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connectthreshold within this time period (after the engine has been started for example), the load will not be disconnected.The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.Victron Energy BPR110022000 Specifications:
  • Maximum cont. load current: 100A
  • Peak current (during 30 seconds): 600A
  • Operating voltage range: 6 –35V
  • Current consumption BLE on When on: 1,4mA When off or low voltage shutdown: 0.9mA
  • Current consumption BLE on When off: 1,2mA When off or low voltage shutdown: 0.7mA
  • Alarm output delay: 12 seconds
  • Max. load on alarm output: 50mA (short circuit proof)
  • Load disconnect delay: 90 seconds (immediate if triggered by the VE.Bus BMS)
  • Default thresholds
    • Disengage:10,5V or 21V
    • Engage: 12V or 24V
  • Operating temperature range Full load: -40°C to +40°C (up to 60% of nominal load at 50°C)
  • IP rating
    • Electronics: IP67 (potted)
    • Connections: IP00
  • Connection: M8
  • Weight: 0,5 kg 0.6 lbs
  • Dimensions (hxwxd): 59 x 42 x 115 mm

Legendary Products & Support From Authorized Dealers

When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

  • ▸ Expert Knowledge & Training

    Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

  • ▸ Authorized Warranty Protection:

    We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

  • ▸ Reliable Customer Support:

    If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

  • ▸ Protect Your Investment:

    Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

Choose wisely. Buy from an authorized Victron Energy dealer today!

Victron Energy BPR110022000 Smart BatteryProtect 12/24V 100A

Product form

Victron Energy Smart BatteryProtect 12/24V 100A: The Battery Protection From Victron Energy Have Been Designed to Be a True World-wide... Read more

SKU: BPR110022000

  • In Stock

$128.00 Incl. VAT

    Description

    Victron Energy Smart BatteryProtect 12/24V 100A: The Battery Protection From Victron Energy Have Been Designed to Be a True World-wide Product

    The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which woulddamage the battery) or before it has insufficient power left to crank the engine.The Smart BatteryProtect can also be used as a system on/off switch. See manual for details.Bluetooth: programming made easyWhen using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).If required, Bluetooth can be disabled.A special setting for Li-ion batteriesIn this mode the Battery Protect can be controlled by the VE.Bus BMS.Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connectiondiagram in the manual.Ultra-low current consumptionThis is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.Over voltage protectionTo prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.Ignition proofNo relays but MOSFET switches, and therefore no sparks.Delayed alarm outputThe alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Startingthe engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative(minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.Delayed load disconnect and delayed reconnectThe load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connectthreshold within this time period (after the engine has been started for example), the load will not be disconnected.The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.Victron Energy BPR110022000 Specifications:
    • Maximum cont. load current: 100A
    • Peak current (during 30 seconds): 600A
    • Operating voltage range: 6 –35V
    • Current consumption BLE on When on: 1,4mA When off or low voltage shutdown: 0.9mA
    • Current consumption BLE on When off: 1,2mA When off or low voltage shutdown: 0.7mA
    • Alarm output delay: 12 seconds
    • Max. load on alarm output: 50mA (short circuit proof)
    • Load disconnect delay: 90 seconds (immediate if triggered by the VE.Bus BMS)
    • Default thresholds
      • Disengage:10,5V or 21V
      • Engage: 12V or 24V
    • Operating temperature range Full load: -40°C to +40°C (up to 60% of nominal load at 50°C)
    • IP rating
      • Electronics: IP67 (potted)
      • Connections: IP00
    • Connection: M8
    • Weight: 0,5 kg 0.6 lbs
    • Dimensions (hxwxd): 59 x 42 x 115 mm

    Legendary Products & Support From Authorized Dealers

    When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

    • ▸ Expert Knowledge & Training

      Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

    • ▸ Authorized Warranty Protection:

      We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

    • ▸ Reliable Customer Support:

      If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

    • ▸ Protect Your Investment:

      Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

    Choose wisely. Buy from an authorized Victron Energy dealer today!

    Recently viewed products

    Footer image

    © 2025 BrandBeast

      • Visa
      • Mastercard
      • American Express
      • Zip
      • PayPal

      Login

      Forgot your password?

      Don't have an account yet?
      Create account