Victron Energy CYR020230430 24/48V-230A Cyrix-Li-Charge Battery Charger

Description

Victron Energy 24/48V-230A Cyrix-Li-Charge Battery Charger: The Battery Charger From Victron Have Been Designed to Be a True Worldwide Product

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature. In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds. After 2 attempts to reengage with 3 seconds delay, the delay increases to 10 minutes. Whenever battery voltage is less than 13,5 V (resp. 27 V or 54 V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5 V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7 V or more, the Cyrix will reengage, with 3 seconds delay.Victron Energy CYR020230430 Specifications:
  • Continuous current and breaking capacity at 12V: 230 A
  • Breaking capacity at 48V: 80 A
  • LED Status Indication: Yes
  • Control Cable: Included (length 1 meter)
  • Connect Voltage: 13,7 V / 27,4 V / 54,8 V
  • Current consumption when open: <4 mA
  • Protection category: IP54

Legendary Products & Support From Authorized Dealers

When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

  • ▸ Expert Knowledge & Training

    Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

  • ▸ Authorized Warranty Protection:

    We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

  • ▸ Reliable Customer Support:

    If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

  • ▸ Protect Your Investment:

    Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

Choose wisely. Buy from an authorized Victron Energy dealer today!

Victron Energy CYR020230430 24/48V-230A Cyrix-Li-Charge Battery Charger

Product form

Victron Energy 24/48V-230A Cyrix-Li-Charge Battery Charger: The Battery Charger From Victron Have Been Designed to Be a True Worldwide ProductThe... Read more

SKU: CYR020230430

  • In Stock

$263.00 Incl. VAT

    Description

    Victron Energy 24/48V-230A Cyrix-Li-Charge Battery Charger: The Battery Charger From Victron Have Been Designed to Be a True Worldwide Product

    The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature. In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds. After 2 attempts to reengage with 3 seconds delay, the delay increases to 10 minutes. Whenever battery voltage is less than 13,5 V (resp. 27 V or 54 V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5 V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7 V or more, the Cyrix will reengage, with 3 seconds delay.Victron Energy CYR020230430 Specifications:
    • Continuous current and breaking capacity at 12V: 230 A
    • Breaking capacity at 48V: 80 A
    • LED Status Indication: Yes
    • Control Cable: Included (length 1 meter)
    • Connect Voltage: 13,7 V / 27,4 V / 54,8 V
    • Current consumption when open: <4 mA
    • Protection category: IP54

    Legendary Products & Support From Authorized Dealers

    When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

    • ▸ Expert Knowledge & Training

      Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

    • ▸ Authorized Warranty Protection:

      We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

    • ▸ Reliable Customer Support:

      If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

    • ▸ Protect Your Investment:

      Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

    Choose wisely. Buy from an authorized Victron Energy dealer today!

    Recently viewed products

    Footer image

    © 2025 Frankies BrandBeast

      • Visa
      • Mastercard
      • American Express
      • Zip
      • PayPal

      Login

      Forgot your password?

      Don't have an account yet?
      Create account