Description
Victron Energy EV Charging Station NS 22kW Three-Phase EV Charging. Solar Integration. Victron Ecosystem Ready.
Product Overview
The Victron Energy EV Charging Station NS (EVC200300200) is a professional-grade AC electric vehicle charger delivering up to 22kW in three-phase mode or 7.3kW in single-phase mode making it one of the fastest home and commercial AC EV chargers available in the Australian market. Supplied in blue as standard, the front cover is interchangeable with optional black (EVC200300310) or white (EVC200300410) panels to suit any installation environment.
The NS designation distinguishes this from the earlier EV Charging Station it is technically identical in charging capability but features a new, modern industrial design without a built-in LCD screen. Configuration, monitoring, and control are handled entirely via VictronConnect over Bluetooth and a built-in WiFi interface either through a direct WiFi Access Point or integration into an existing WiFi LAN. Where the EV Charging Station NS delivers its most compelling advantage over generic EV chargers is in its deep integration with the Victron Energy ecosystem: full bidirectional communication with any Victron GX Device and the VRM remote monitoring portal, and the ability to automatically route excess solar generation directly into the vehicle when operating within a Victron solar system. The RGB light ring around the charging port provides at-a-glance status indication across all operating states.
Note : Installation must be carried out by a licensed electrician. This is a mandatory requirement not a recommendation.
Key Specifications
-
Part Number: EVC200300200
-
Product: EV Charging Station NS
-
Colour: Blue (standard) — black and white covers available separately
-
Maximum Output (3-Phase): 22kW AC
-
Maximum Output (Single-Phase): 7.3kW AC
-
Phase Configuration: Three-phase and single-phase capable
-
Display: None — no built-in LCD screen
-
Setup Interface: VictronConnect via Bluetooth + integrated web interface via WiFi AP or WiFi LAN
-
GX Device Integration: Yes — full integration with Victron GX devices
-
VRM Integration: Yes — remote monitoring and control via VRM portal
-
Solar Excess Charging: Yes — within Victron solar ecosystem
-
Charge Modes: Manual, scheduled
-
Status Indicator: Fully programmable RGB light ring (disconnected, charging, charged, and other states)
-
Replacement Cover Options: Black (EVC200300310), White (EVC200300410)
-
Installation Requirement: Licensed electrician mandatory
-
Connector Type: Not specified — confirm with supplier
-
IP Rating: Not specified — confirm with supplier
-
Cable Length: Not specified — confirm with supplier
-
Dimensions: Not specified — confirm with supplier
-
Weight: 5.0 kg
-
WiFi Standards: Not specified — confirm with supplier
-
Maximum Current per Phase: Not specified — confirm with supplier
Features & Benefits
-
22kW Three-Phase Output — Maximum AC Charging Speed — At 22kW three-phase, the EV Charging Station NS delivers the fastest AC home and commercial charging rate supported by most current-generation electric vehicles. In single-phase mode it delivers 7.3kW — still significantly faster than a standard 10A or 15A outlet charger. The charging rate your vehicle actually accepts is determined by its onboard charger — confirm your vehicle's maximum AC charge acceptance rate before specifying.
-
Single-Phase and Three-Phase Capable — The EV Charging Station NS operates across both single-phase and three-phase AC supply without hardware changes, automatically adapting to the available supply at the installation point. This makes it a single product suitable for both residential single-phase sites and commercial or industrial three-phase premises.
-
No LCD Screen — App and Web Interface Controlled — The NS removes the built-in screen present on the earlier EV Charging Station, relying instead on the VictronConnect app via Bluetooth and a built-in web interface accessible via WiFi. This simplifies the hardware, reduces potential failure points, and moves all configuration and monitoring to devices users already carry — phones, tablets, and computers. Initial setup, ongoing configuration, charge mode selection, and status monitoring are all managed through these interfaces.
-
Full Victron GX and VRM Integration — The EV Charging Station NS integrates fully with any Victron GX device (Cerbo GX, Color Control GX, and others) — enabling the charger to be monitored, controlled, and automated as part of a complete Victron energy system. Through VRM, remote monitoring and control are accessible from anywhere with an internet connection. This is not basic smart charger connectivity — it is full bidirectional system integration with a professional energy management platform.
-
Solar Excess Charging — Charge Your Vehicle with Surplus Solar — When installed within a Victron solar energy system, the EV Charging Station NS can be configured to automatically divert surplus solar generation — power that would otherwise be exported to the grid — directly into the connected vehicle. This turns excess solar into usable transport energy rather than grid export at low feed-in tariff rates. Requires a compatible Victron solar installation with a GX device.
-
Manual and Scheduled Charge Modes — Beyond automatic solar excess charging, manual mode allows immediate user-initiated charging on demand. Scheduled mode enables time-of-use optimisation — configuring the charger to operate during off-peak tariff windows for maximum cost efficiency. The combination of modes allows the system to respond to varying electricity pricing, solar availability, and driver requirements.
-
Programmable RGB Light Ring — The light ring surrounding the charging port displays different colours and effects to indicate the current operating state — disconnected, connected, charging, charged, fault, and other conditions — providing clear at-a-glance status without requiring a phone or screen. Fully programmable for custom colour assignments per state.
-
Modern NS Design — Interchangeable Front Cover — The updated industrial design is available in blue (standard, this listing), with optional black (EVC200300310) and white (EVC200300410) front covers available separately. The interchangeable cover system allows installers and owners to match the charging station to any wall surface, architectural finish, or brand colour requirement without purchasing a different unit.
-
WiFi Connectivity — AP and LAN Modes — The integrated WiFi interface operates either as a standalone Access Point for direct device connection, or connects to an existing WiFi network (LAN mode) for integration into a home or commercial network. Network integration enables remote access via the web interface without requiring Bluetooth proximity.
Technical Specs
| Specification |
Detail |
| Part Number |
EVC200300200 |
| Product |
EV Charging Station NS |
| Colour |
Blue (standard) |
| Maximum Output (3-Phase) |
22kW AC |
| Maximum Output (Single-Phase) |
7.3kW AC |
| Phase Capability |
Three-phase and single-phase |
| Display |
None (no built-in LCD) |
| Configuration Interface |
VictronConnect (Bluetooth) + web interface (WiFi AP or LAN) |
| GX Device Integration |
Yes — full integration |
| VRM Integration |
Yes — remote monitoring and control |
| Solar Excess Charging |
Yes — within Victron solar ecosystem |
| Charge Modes |
Manual, scheduled |
| Status Indicator |
Programmable RGB light ring |
| Cover Options |
Blue (standard), Black (EVC200300310), White (EVC200300410) |
| Installation |
Licensed electrician mandatory |
| Connector Type |
Not specified — confirm with supplier |
| Maximum Current per Phase |
Not specified — confirm with supplier |
| IP Rating |
Not specified — confirm with supplier |
| Cable Length |
Not specified — confirm with supplier |
| WiFi Standards |
Not specified — confirm with supplier |
| Dimensions |
Not specified — confirm with supplier |
| Weight |
5.0 kg |
Compatible With / Goes Well With
Victron Ecosystem Integration:
- Any Victron GX Device — Cerbo GX, Color Control GX, Ekrano GX (for full system integration and VRM remote control)
- Victron VRM Portal (remote monitoring and control via internet)
- Victron solar systems with MPPT charge controllers (for solar excess charging mode)
- Victron MultiPlus / Quattro inverter-chargers (system integration)
Optional Replacement Front Covers:
- EVC200300310 — Black Front Cover for EV Charging Station NS
- EVC200300410 — White Front Cover for EV Charging Station NS
Installation:
- Licensed electrician required — three-phase and single-phase AC wiring
Weight
5.0 kg
Frequently Asked Questions
What is the difference between the EV Charging Station NS and the original EV Charging Station?
The NS is technically identical in charging capability — same 22kW three-phase output, same Victron ecosystem integration. The differences are a new, modern industrial design available in three interchangeable colours, and the removal of the built-in LCD screen in favour of app-based and web-based configuration and monitoring via VictronConnect and WiFi.
Do I need a three-phase power supply to use this charger?
No. The EV Charging Station NS operates on both single-phase and three-phase supply. On single-phase it delivers up to 7.3kW; on three-phase up to 22kW. Confirm your property's supply type with a licensed electrician before installation to determine the achievable charge rate at your site.
How does solar excess charging work and what do I need for it?
When integrated with a Victron GX device and a Victron solar system, the EV Charging Station NS can be configured to automatically use surplus solar power — generation that exceeds your current household or system load — to charge the connected vehicle. This requires a Victron solar installation with an MPPT charge controller and a GX device (such as Cerbo GX). It is not available as a standalone function without Victron GX integration.
Can I control and monitor this charger remotely?
Yes. Through a connected Victron GX device and the VRM portal, the EV Charging Station NS can be monitored and controlled remotely via any internet-connected device. Local control and configuration is available via VictronConnect over Bluetooth and the built-in web interface over WiFi.
Can I change the colour of the front cover after installation?
Yes. The front cover is interchangeable — black (EVC200300310) and white (EVC200300410) replacement covers are available separately. The cover can be changed without tools or electrical work after installation.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
