Victron Energy SKI024080000 Skylla-i 24V 80A (1+1) Battery Charger

Description

Victron Energy Skylla-i 24V 80A (1+1) Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide Product

A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Skylla-i (1+1): two outputs to charge 2 battery banks The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Skylla-i (3): three full current outputs to charge 3 battery banks The Skylla-i (3) features 3 isolated outputs. All outputs can supply the full rated output current. Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Victron Energy SKI024080000 Specifications: Skylla-i
  • Input voltage (VAC): 230 V
  • Input voltage range (VAC): 185-265 V
  • Input voltage range (VDC): 180-350 V
  • Maximum AC input current @ 180 VAC: 16 A
  • Frequency (Hz): 45-65 Hz
  • Power factor: 0,98
  • Charge voltage 'absorption' (VDC): 28,8 V
  • Charge voltage 'float' (VDC): 27,6 V
  • Charge voltage ‚Äòstorage' (VDC): 26,4 V
  • Charge current (A): 80 A
  • Charge current starter batt. (A): 4 A
  • Charge algorithm: 7 stage adaptive
  • Battery capacity (Ah): 400-800 Ah
  • Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control
  • Temperature sensor: Yes
  • Can be used as power supply: Yes
  • Remote on-off port: Yes (can be connected to a Li-Ion BMS)
  • CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, galvanically isolated
  • Synchronised parallel operation: Yes, with VE.Can
  • Alarm relay: DPST, AC rating: 240VAC/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC
  • Forced cooling: Yes
  • Protection Battery: reverse polarity (fuse), Output short circuit, Over temperature
  • Operating temp. range -20 to 60¬∞C (Full output current up to 40¬∞C)
  • Humidity (non-condensing) max 95%
Enclosure:
    • Material & Colour: aluminium (blue RAL 5012)
    • Battery-connection: M8 bolts
    • 230 VAC-connection: screw-clamp 10mm¬≤ (AWG 7)
    • Protection category: IP 21
    • Weight kg (lbs): 7 kg (16 lbs)

Legendary Products & Support From Authorized Dealers

When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

  • ▸ Expert Knowledge & Training

    Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

  • ▸ Authorized Warranty Protection:

    We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

  • ▸ Reliable Customer Support:

    If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

  • ▸ Protect Your Investment:

    Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

Choose wisely. Buy from an authorized Victron Energy dealer today!

Victron Energy SKI024080000 Skylla-i 24V 80A (1+1) Battery Charger

Product form

Victron Energy Skylla-i 24V 80A (1+1) Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be... Read more

SKU: SKI024080000

  • In Stock

$2,105.40 $2,034.83 Incl. VAT

    Description

    Victron Energy Skylla-i 24V 80A (1+1) Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide Product

    A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Skylla-i (1+1): two outputs to charge 2 battery banks The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Skylla-i (3): three full current outputs to charge 3 battery banks The Skylla-i (3) features 3 isolated outputs. All outputs can supply the full rated output current. Rugged Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Flexible Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use. Victron Energy SKI024080000 Specifications: Skylla-i
    • Input voltage (VAC): 230 V
    • Input voltage range (VAC): 185-265 V
    • Input voltage range (VDC): 180-350 V
    • Maximum AC input current @ 180 VAC: 16 A
    • Frequency (Hz): 45-65 Hz
    • Power factor: 0,98
    • Charge voltage 'absorption' (VDC): 28,8 V
    • Charge voltage 'float' (VDC): 27,6 V
    • Charge voltage ‚Äòstorage' (VDC): 26,4 V
    • Charge current (A): 80 A
    • Charge current starter batt. (A): 4 A
    • Charge algorithm: 7 stage adaptive
    • Battery capacity (Ah): 400-800 Ah
    • Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control
    • Temperature sensor: Yes
    • Can be used as power supply: Yes
    • Remote on-off port: Yes (can be connected to a Li-Ion BMS)
    • CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, galvanically isolated
    • Synchronised parallel operation: Yes, with VE.Can
    • Alarm relay: DPST, AC rating: 240VAC/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC
    • Forced cooling: Yes
    • Protection Battery: reverse polarity (fuse), Output short circuit, Over temperature
    • Operating temp. range -20 to 60¬∞C (Full output current up to 40¬∞C)
    • Humidity (non-condensing) max 95%
    Enclosure:
      • Material & Colour: aluminium (blue RAL 5012)
      • Battery-connection: M8 bolts
      • 230 VAC-connection: screw-clamp 10mm¬≤ (AWG 7)
      • Protection category: IP 21
      • Weight kg (lbs): 7 kg (16 lbs)

    Legendary Products & Support From Authorized Dealers

    When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

    • ▸ Expert Knowledge & Training

      Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

    • ▸ Authorized Warranty Protection:

      We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

    • ▸ Reliable Customer Support:

      If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

    • ▸ Protect Your Investment:

      Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

    Choose wisely. Buy from an authorized Victron Energy dealer today!

    Recently viewed products

    Footer image

    © 2025 Frankies BrandBeast

      • Visa
      • Mastercard
      • American Express
      • Zip
      • PayPal

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      Sign up for our newsletter

      Subscribe to our emails