Victron Energy SKY024035000 Skylla-IP65 24/35(1+1) 120-240V

Description

Victron Energy Skylla-IP65 24/35(1+1) 120-240V: A Powerful, Waterproof, And Intelligent Battery Charger With A 7 Stage Adaptive Charge Algorithm

Suitable for a wide range of battery types and chemistries featuring a dedicated Lithium-ion charge algorithm and wide 90VAC to 265AC input voltage range for worldwide use no matter where you are located.Victron Energy SKY024035000 Features:
  • Skylla-IP65 (1+1): two outputs to charge 2 battery banks. The Skylla-IP65 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A trickle charge and with a slightly lower output voltage, is intended to top up a starter battery.
  • IP65 Rating Protection. With a steel epoxy powder-coated case the Skylla is built to withstand the rigours of adverse environments such as heat, humidity, and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits if needed by automatic reduction of output current under extreme environmental conditions.
  • LCD Display.For status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.
  • Synchronized Parallel Operation. Several chargers can be connected in parallel and synchronized with the help of the CAN-bus interface. This is achieved by simply connecting the chargers with RJ45 UTP cables.
  • Variable Absorption - the right amount of charge for a lead-acid battery: When only shallow discharges occur the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
  • BatterySafe mode - Preventing damage due to excessive gassing If to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP65 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
  • Storage mode - Less maintenance and aging when the battery is not in use. The Storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode, float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
  • Li-Ion (LiFePO4) ready. Simple charger on-off control can be implemented by connecting a relay or open collector Opto coupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively, complete control of voltage and current can be achieved by connecting to the CAN-bus port.
  • Temperature Compensation - Increase battery life. The Skylla-IP65 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations in battery temperature are expected.
  • CAN-bus interface (NMEA2000). To connect to a CAN-bus network, to a Skylla-i Control panel, or to the Color Control digital display.

Legendary Products & Support From Authorized Dealers

When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

  • ▸ Expert Knowledge & Training

    Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

  • ▸ Authorized Warranty Protection:

    We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

  • ▸ Reliable Customer Support:

    If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

  • ▸ Protect Your Investment:

    Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

Choose wisely. Buy from an authorized Victron Energy dealer today!

Victron Energy SKY024035000 Skylla-IP65 24/35(1+1) 120-240V

Product form

Victron Energy Skylla-IP65 24/35(1+1) 120-240V: A Powerful, Waterproof, And Intelligent Battery Charger With A 7 Stage Adaptive Charge AlgorithmSuitable for... Read more

SKU: SKY024035000

  • In Stock

$1,001.51 Incl. VAT

    Description

    Victron Energy Skylla-IP65 24/35(1+1) 120-240V: A Powerful, Waterproof, And Intelligent Battery Charger With A 7 Stage Adaptive Charge Algorithm

    Suitable for a wide range of battery types and chemistries featuring a dedicated Lithium-ion charge algorithm and wide 90VAC to 265AC input voltage range for worldwide use no matter where you are located.Victron Energy SKY024035000 Features:
    • Skylla-IP65 (1+1): two outputs to charge 2 battery banks. The Skylla-IP65 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A trickle charge and with a slightly lower output voltage, is intended to top up a starter battery.
    • IP65 Rating Protection. With a steel epoxy powder-coated case the Skylla is built to withstand the rigours of adverse environments such as heat, humidity, and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits if needed by automatic reduction of output current under extreme environmental conditions.
    • LCD Display.For status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.
    • Synchronized Parallel Operation. Several chargers can be connected in parallel and synchronized with the help of the CAN-bus interface. This is achieved by simply connecting the chargers with RJ45 UTP cables.
    • Variable Absorption - the right amount of charge for a lead-acid battery: When only shallow discharges occur the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
    • BatterySafe mode - Preventing damage due to excessive gassing If to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP65 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
    • Storage mode - Less maintenance and aging when the battery is not in use. The Storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode, float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
    • Li-Ion (LiFePO4) ready. Simple charger on-off control can be implemented by connecting a relay or open collector Opto coupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively, complete control of voltage and current can be achieved by connecting to the CAN-bus port.
    • Temperature Compensation - Increase battery life. The Skylla-IP65 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations in battery temperature are expected.
    • CAN-bus interface (NMEA2000). To connect to a CAN-bus network, to a Skylla-i Control panel, or to the Color Control digital display.

    Legendary Products & Support From Authorized Dealers

    When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:

    • ▸ Expert Knowledge & Training

      Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.

    • ▸ Authorized Warranty Protection:

      We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.

    • ▸ Reliable Customer Support:

      If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.

    • ▸ Protect Your Investment:

      Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?

    Choose wisely. Buy from an authorized Victron Energy dealer today!

    Recently viewed products

    Footer image

    © 2025 Frankies BrandBeast

      • Visa
      • Mastercard
      • American Express
      • Zip
      • PayPal

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      Sign up for our newsletter

      Subscribe to our emails