Fusion PF-SW120D2 12” Dual 2 Ohm Voice Coil Subwoofer The Performance subwoofer range delivers massive bass performance. A carefully balanced Bi-Spatial composite cone and full excursion butyl rubber surround combined with the ultimate in motor assembly construction, results in a subwoofer package that delivers ground-shaking performance on all fronts. The Dual 2 Ohm voice coil configuration offers versatility when creating the optimum load for your FUSION amplifier, ensuring maximum output is delivered for higher SPL. This 12" Subwoofer delivers a massive 1600 Watts of power, now thats high performance!! Engineered with thermally efficient exhaust vents to diffuse heat and offer greater reliability and higher power handling, the Performance subwoofer range is designed for the true audio enthusiast. Great Looks, Easy Installation and Thumping Bass, there's nothing quite like the FUSION Performance Series. Fusion PF-SW120D2 Specifications: Peak Power (Watts) 1600 Rated Power (Watts) 400 Frequency Response 30Hz - 1.2kHz Sensitivity (dB) 89 Cone Material Pressed Paper Surround Material Butyl Rubber Basket Pressed Steel D.C. Coil Resistance (Re) (?) 4.47 Ohm Free Air Resonance (Fs) 38.30 Cone Area (SD) (cm²) 530.93 Cone Area (SD) (In²) 82.29 Linear Excurson (XMAX) (mm) 6.00 Linear Excurson (XMAX) (In) 0.24 Mechanical Excursion (mm) 9.00 Mechanical Excursion (In) 0.35 VAS (L) 44.69 VAS (CUFT) 1.58 Compliance (CMS) (?M/N) 112.00u M/N Force Factor (BI) (TM) 14.04 Mechanical Q (QMS) 2.93 Electrical Q (QES) 0.84 Total Loudspeaker Q (QTS) 0.65 Voice Coil Impedance 2 x 2 Ohm Mounting Depth 158mm (6-1/4") Mounting Diameter 279mm (11") Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

12" 4-Ohm DVC Punch P2 Subwoofer 400W RMS, Kevlar Cone, VAST, Dual Spider, Diamond-Cut Cast Aluminium Trim Ring, Extended Pole Piece. Product Overview The Rockford Fosgate Punch P2D4-12 is a 12" 4-Ohm Dual Voice Coil (DVC) subwoofer rated at 400W RMS the 4-Ohm variant of the 12" Punch P2 platform. Identical construction to the P2D2-12 with the sole difference being 4-Ohm voice coil impedance per coil, providing wiring options of 2-Ohm (parallel), 8-Ohm (series), or 4-Ohm per coil for bi-amplification broader amplifier compatibility than the 2-Ohm variant without the 1-Ohm parallel concern. Optimised for sealed and vented enclosures. Sold as an individual unit. All confirmed Punch P2 construction applies: Kevlar fibre-reinforced paper cone, VAST surround (up to 25% increased cone area), high-temperature voice coil with spun-laced Nomex® reinforcement collar, dual linear spider with embedded 16 AWG tinsel leads, extended pole piece with bumped vented backplate, StampCast basket with integrated spider venting, diamond-cut cast aluminium trim ring with grille provision, and protective PVC textured magnet cover. Key Specifications Subwoofer size: 12 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 4-Ohm per coil (2-Ohm parallel / 8-Ohm series / 4-Ohm biamp) Power handling (RMS): 400W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Surround technique: VAST (up to 25% increased cone area) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Mounting depth: Not specified — confirm with Rockford Fosgate Voice coil: High-temp, Nomex® reinforcement collar Cone: Kevlar fibre-reinforced paper Spider: Dual linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Pole piece: Extended Backplate: Bumped and vented Input terminals: Features: push — confirm vs compression with Rockford Fosgate Trim ring: Diamond-cut cast aluminium (grille insert compatible) Magnet cover: Protective PVC textured Enclosure compatibility: Sealed and vented ✓ Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 4-Ohm DVC — Broad Amplifier Compatibility, No 1-Ohm Requirement: 2-Ohm (parallel): Most common — compatible with 2-Ohm mono amplifiers 8-Ohm (series): For amplifiers with higher minimum impedance 4-Ohm per coil (biamp): Separate amplifier channels 400W RMS — Confirmed 400W RMS — same as P2D2-12. Requires an amplifier rated at 400W RMS at the selected impedance. 12" Cone — Greater air movement and lower frequency extension than the 10" P2 models. Dual Linear Spider — Improved compliance linearity and cone control at high excursion. Kevlar Fibre-Reinforced Paper Cone with VAST — Stiffness and breakup resistance plus up to 25% increased effective cone area. Nomex® Voice Coil Collar — Thermal and mechanical reinforcement at 400W sustained. Extended Pole Piece and Bumped Vented Backplate — Increased Xmax; air spring prevention. Diamond-Cut Cast Aluminium Trim Ring — Premium machined aluminium finish with grille provision. StampCast Basket with Integrated Spider Venting — Motor cooling during operation. Technical Specs Specification Detail Brand Rockford Fosgate Part Number P2D4-12 Series Punch P2 Subwoofer Size 12 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 4-Ohm ✓ Wiring Options 2-Ohm (parallel) / 8-Ohm (series) / 4-Ohm biamp ✓ Power Handling (RMS) 400W ✓ Peak Power Not specified Sensitivity Not specified Fs / Xmax / Qts Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified Mounting Depth Not specified Surround Technique VAST ✓ Voice Coil High-Temp, Nomex® Collar ✓ Cone Kevlar Fibre-Reinforced Paper ✓ Spider Dual Linear, Embedded 16 AWG Tinsel Leads ✓ Basket StampCast with Integrated Spider Venting Pole Piece Extended ✓ Backplate Bumped and Vented ✓ Input Terminals Features: push — confirm vs compression with Rockford Fosgate Trim Ring Diamond-Cut Cast Aluminium (Grille Compatible) ✓ Magnet Cover Protective PVC Textured ✓ Enclosure Type Sealed and Vented ✓ CEA-2031 Compliant Not confirmed Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed and vented — both confirmed Wiring: 2-Ohm → parallel 8-Ohm → series 4-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1500-1BDCP or T2500-1BDCP mono amplifiers — confirm RMS output at 2-Ohm matches 400W Frequently Asked Questions What is the difference between P2D4-12 and P2D2-12? Both are identical 12" Punch P2 subwoofers with the same 400W RMS and construction. The sole difference is impedance: P2D4-12 is 4-Ohm per coil (2-Ohm parallel / 8-Ohm series), P2D2-12 is 2-Ohm per coil (1-Ohm parallel / 4-Ohm series). The 4-Ohm DVC avoids the 1-Ohm parallel requirement and is more broadly compatible with most mono amplifiers. What amplifier power is appropriate? 400W RMS at the selected wiring impedance. Confirm the amplifier's RMS output at 2-Ohm (parallel) or 4-Ohm before purchasing. What enclosure volume is recommended? Not confirmed in the supplier data. Pull the official Rockford Fosgate P2D4-12 datasheet for sealed and vented volume recommendations. Is a grille available? The diamond-cut cast aluminium trim ring accommodates an optional grille insert. Confirm the compatible SKU with Rockford Fosgate. What terminal type does the P2D4-12 use? The features list states "nickel plated push terminals." The P2D4-10 spec table indicates "compression terminals" — a conflict present across the P2 range. Confirm with Rockford Fosgate. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Champion Has Returned! Pioneer's latest ‚ÄúChampion‚Äù series sub-woofers are here. The TS-W312D4 is designed to take the ‚ÄúChampion‚Äù Series name to the next level with a range of improvements. With a light weight/high rigidity cone design, dual layer hybrid surround, large powerful motor assembly and enclosed basket structure, the new ‚ÄúChampion‚Äù Series sub-woofers not only look good but will perform even better! Match with Pioneer's GM-D Series amplifiers for an impressive in car experience! Rigid Cone Construction  Combining a large rigid centre cap and lightweight high rigidity cone structure improves output performance and reduces loss. Improved dual layer (elastic polymer & fibre) hybrid surround provides a lighter and more durable surround than traditional rubber compounds. Powerful Motor Assembly  Combining a double stacked 90oz magnet (26% bigger than our previous model and some of the heaviest in it's class) with a longer voice coil design, the ‚ÄúChampion‚Äù Series sub-woofers are designed for high power handling and endurance! Features: 1,600w Max (500w Nom) High rigidity (IMPP) composite seamless cone construction with honeycomb design Dual layer (elastic polymer & fibre) surround for a highly durable design. Massive 90 oz double stacked magnet and long voice coil with aluminium bobbin for increased bass and improved heat-dispersion. Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Pioneer TS-W3004D4: The “Champion-Series Pro” Has Arrived! Pioneer’s latest “Champion-Series PRO” sub-woofer is here. The Pioneer TS-W3004D4 is designed to take the current “Champion Series” name to the next level with a performance to wake the neighbourhood. With a lightweight/high rigidity cone design, dual-layer hybrid surround, massive powerful motor assembly, iconic red dual spider design, 115oz double stacked magnet, and enclosed basket structure, this new “Champion-Series PRO” sub-woofer not only looks amazing but will make you the envy of your mates! Match with Pioneer’s powerful GM-D Series amplifiers for an impressive in (and out of) car experience! Rigid Cone ConstructionCombining a large rigid centre cap and lightweight high-rigidity cone structure improves output performance and reduces loss. Improved dual layer (elastic polymer & fibre) hybrid surround provides a lighter and more durable surround than traditional rubber compounds. Powerful Motor AssemblyCombining a double-stacked 115oz magnet (the largest in the “Champion-Series” range) with a huge voice coil, this “Champion-Series PRO” sub-woofer is designed to make the world stand up and listen! Pioneer TS-W3004D4 Specifications: General Mounting Depth 190mm Magnet Weight 115oz Woofer Magnet Composition Ferrite Woofer Surround Dual Layer (Elastic Polymer & Fibre) Woofer Composition Paper (Honeycomb design) Impedance Dual 4Ω Maximum Peak Power Handling 2,400w Continuous Power Handling (RMS) 800w Size 12" Audio Hi-Res Certified No Sensitivity (1W/1 m) 94dB Frequency Range 20 Hz to 1.6 kHz Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

12" 2-Ohm Dual Voice Coil Subwoofer 250W RMS, Mica-Injected Polypropylene Cone, StampCast Basket with Spider Venting, 12 AWG Compression Terminals. Product Overview The Rockford Fosgate Prime R2D2-12 is a 12" 2-Ohm Dual Voice Coil (DVC) subwoofer rated at 250W RMS the 12" 2-Ohm variant of the R2 series, sharing the same StampCast construction platform as the R2D4-10. The larger 12" cone moves more air than the 10" model for increased bass output and lower frequency extension; the 2-Ohm DVC coil configuration provides wiring options of 1-Ohm (parallel) or 4-Ohm (series) rather than the 2-Ohm or 8-Ohm options of the 4-Ohm DVC variant. Optimised for sealed and vented enclosures. Sold as an individual unit. Construction is consistent with the R2 platform: mica-injected polypropylene cone, anodized aluminium voice coil former, linear spider with embedded 16 AWG tinsel leads, StampCast basket with integrated spider venting, 12 AWG compression terminals, and integrated PVC trim ring. Key Specifications Subwoofer size: 12 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp) Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil former: Anodized aluminium Cone: Mica-injected polypropylene Surround: Not specified — confirm with Rockford Fosgate Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Input terminals: 12 AWG compression terminals Trim ring: Integrated PVC Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 12" Cone — More Air Movement Than 10" — The 12" cone moves more air per stroke than a 10" driver — producing more bass output and generally extending useful bass reproduction to lower frequencies, particularly in vented enclosures tuned appropriately. 250W RMS Power Handling — 250W RMS confirmed. The larger 12" driver handles the same sustained power as the 10" R2D4-10 while producing greater output from its larger cone area. 2-Ohm DVC — Three Wiring Options: 1-Ohm (parallel): Both coils wired in parallel — produces the maximum output from amplifiers stable at 1-Ohm. Confirm the amplifier is rated stable at 1-Ohm before using this configuration. 4-Ohm (series): Both coils wired in series — a safe and widely compatible load for most mono amplifiers. 2-Ohm per coil (biamp): Each coil to a separate amplifier channel. Mica-Injected Polypropylene Cone — Mica particles stiffen the polypropylene cone compound for reduced flex and more accurate bass reproduction, with the moisture resistance of polypropylene. StampCast Basket with Integrated Spider Venting — Venting openings in the basket allow airflow around the spider to cool the motor during sustained operation. Anodized Aluminium Voice Coil Former — Anodizing increases the emissivity of the aluminium surface, improving heat radiation from the former into the surrounding air and magnet gap for extended thermal capacity. 12 AWG Compression Terminals — Heavier gauge and more secure connection than push terminals — appropriate for the current levels drawn at 250W RMS. Linear Spider with Embedded 16 AWG Tinsel Leads — Consistent compliance across the excursion range; integrated leads reduce failure at the flex point under sustained high-excursion use. Optimised for Sealed and Vented Enclosures — Both sealed and vented enclosure designs are supported. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R2D2-12 Series Prime R2 Subwoofer Size 12 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 2-Ohm ✓ Wiring Options 1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Xmax Not specified — confirm with Rockford Fosgate Voice Coil Former Anodized Aluminium Cone Mica-Injected Polypropylene Surround Not specified — confirm with Rockford Fosgate Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Input Terminals 12 AWG Compression Terminals Trim Ring Integrated PVC Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified — confirm with Rockford Fosgate Cutout Diameter Not specified — confirm with Rockford Fosgate Sold As Individual Unit Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency, more output at tuning frequency Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers — confirm the amplifier's stable impedance and RMS output at the intended wiring configuration A sealed or vented 12" enclosure built to Rockford Fosgate's recommended volume specifications Frequently Asked Questions What are the wiring options for the R2D2-12's 2-Ohm DVC? The 2-Ohm DVC provides three configurations: 1-Ohm (both coils in parallel) for maximum amplifier output where the amp is rated stable at 1-Ohm; 4-Ohm (both coils in series) for broad amplifier compatibility; and 2-Ohm per coil for bi-amplification. Most installers choose between 1-Ohm parallel and 4-Ohm series based on their amplifier's stable impedance rating. Is the 1-Ohm parallel wiring safe? The 1-Ohm parallel load is safe for the subwoofer — the subwoofer itself operates correctly at 1-Ohm. The requirement is that the amplifier must be rated stable at 1-Ohm. Many car audio amplifiers are not rated for 1-Ohm operation and will overheat or fail. Always confirm the amplifier's minimum stable impedance before using the 1-Ohm wiring configuration. What amplifier power is appropriate for the R2D2-12? 250W RMS matched to the wiring impedance selected — 1-Ohm parallel, 4-Ohm series, or 2-Ohm per coil for bi-amp. Confirm the amplifier's RMS output at the selected impedance before purchasing. What enclosure volume is recommended? Enclosure volume and vent specifications are not confirmed in the supplier data. Pull the official Rockford Fosgate R2D2-12 datasheet for recommended net internal volumes for sealed and vented configurations. Does a 12" subwoofer produce more bass than a 10"? The larger 12" cone moves more air per unit of excursion than a 10" driver. In a matched enclosure, this typically produces more output (louder bass) and lower frequency extension. The practical difference depends on the enclosure design, amplifier power, and room acoustics of the vehicle interior. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Engineered With Extreme Precision High-Temp 3‚Äù Voice Coils From Japan 12" 3500w RMS Subwoofer Dual 2-OhmThe ELITE-series subwoofers are the best Phoenix Gold subwoofers period. The new ELITE.2 subwoofers are the best ever. Engineered with extreme precision high-temp 3‚Äù voice coils from Japan for increased power handling and reliability, a larger triple-stacked 230oz motor and radial venting for 30% better heat dissipation over the previous model. The new ELITE.2 still features the legendary tri-LED's on the dust cap which is now customizable and field serviceable. The dual spider system keeps the ultra long voice coil centered to eliminate any motor vibrations and losses. The speaker terminals were relocated to one side of the cast basket for better installation flexibility and the subs are optimized for both sealed or vented enclosures to produce accurate sound quality and massive SPL performance. So the end result is a smooth, effortless output even during massive excursion or extreme power. They are rated at 3,500w RMS using the industry standard CEA-2031 specification and available in dual 4 Ohm and dual 2 Ohm configurations. Legendary Products & Support From Authorized Dealers When you choose Phoenix Gold, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Phoenix Gold dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Phoenix Gold's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Phoenix Gold dealer today!

Read more less