Aerpro APVCBB21 Bonnet Mount UHF Antenna Bracket Volkswagen Amarok 2023-On An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Volkswagen Amarok (2023-on), the APVCBB21 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB21 is a bonnet mount UHF antenna bracket designed specifically for the Volkswagen Amarok from 2023 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Volkswagen Amarok 2023-On Specific Design: The APVCBB21 is engineered specifically for the Volkswagen Amarok from 2023 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB21 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Volkswagen Amarok 2023-on. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB21 is Australian designed and engineered for the specific requirements of the Volkswagen Amarok 2023-on platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB21 Brand Aerpro Compatible Vehicles Volkswagen Amarok, 2023-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB21 is designed specifically for the Volkswagen Amarok from 2023 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Amarok variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB21 require drilling or vehicle modification? No. The APVCBB21 mounts to the passenger side bonnet hinge using the Volkswagen Amarok's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB21 affect bonnet operation or window wipers? No. The APVCBB21 is designed specifically for the Volkswagen Amarok 2023-on bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB21 accept? The APVCBB21 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB21 compatible with earlier Volkswagen Amarok generations? No. The APVCBB21 is designed specifically for the Volkswagen Amarok from 2023 onwards. Earlier Amarok generations use a different bonnet hinge profile and require a different bracket. Confirm your specific Amarok variant and build date before purchase. Is an antenna included with the APVCBB21? No. The APVCBB21 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB20 Bonnet Mount UHF Antenna Bracket Toyota Landcruiser 300 Series An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Landcruiser 300 Series (2021-on), the APVCBB20 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB20 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Landcruiser 300 Series 2021-On Specific Design: The APVCBB20 is engineered specifically for the Toyota Landcruiser 300 Series from 2021 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB20 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota Landcruiser 300 Series. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB20 is Australian designed and engineered for the specific requirements of the Toyota Landcruiser 300 Series platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB20 Brand Aerpro Compatible Vehicles Toyota Landcruiser 300 Series, 2021-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB20 is designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific LC300 variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB20 require drilling or vehicle modification? No. The APVCBB20 mounts to the passenger side bonnet hinge using the Toyota Landcruiser 300 Series existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB20 affect bonnet operation or window wipers? No. The APVCBB20 is designed specifically for the Toyota Landcruiser 300 Series bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB20 accept? The APVCBB20 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB20 compatible with the earlier Toyota Landcruiser 200 Series? No. The APVCBB20 is designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards. Owners of the Landcruiser 200 Series should refer to the APVCBB5 (bonnet hinge mount) or APVCBB18 (mirror mount) instead. Is an antenna included with the APVCBB20? No. The APVCBB20 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB16 Bonnet Mount UHF Antenna Bracket Toyota Prado 120 Series An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Landcruiser Prado 120 Series (2003-2009), the APVCBB16 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB16 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Landcruiser Prado 120 Series from 2003-2009. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Prado 120 Series 2003-2009 Specific Design: The APVCBB16 is engineered specifically for the Toyota Landcruiser Prado 120 Series from 2003-2009, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Owners of the later Toyota Prado 150 Series (2009-2024) should refer to the APVCBB15. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB16 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota Prado 120 Series. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB16 is Australian designed and engineered for the specific requirements of the Toyota Prado 120 Series platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB16 Brand Aerpro Compatible Vehicles Toyota Landcruiser Prado 120 Series, 2003-2009 Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB16 is designed specifically for the Toyota Landcruiser Prado 120 Series from 2003-2009, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Owners of the Toyota Prado 150 Series (2009-2024) should refer to the APVCBB15. Confirm your specific Prado 120 Series variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB16 require drilling or vehicle modification? No. The APVCBB16 mounts to the passenger side bonnet hinge using the Toyota Prado 120 Series existing mounting points, with no drilling, cutting, or modification to the vehicle required. What is the difference between the APVCBB16 and the APVCBB15? Both are vehicle-specific bonnet mount UHF antenna brackets for the Toyota Prado, sharing the same 4mm steel construction, matte black powder-coated finish, 18mm antenna hole, and 5mm cable slot. The APVCBB16 suits the Prado 120 Series from 2003-2009, while the APVCBB15 suits the Prado 150 Series from 2009-2024. The two generations use different bonnet hinge profiles requiring separate brackets. Will the APVCBB16 affect bonnet operation or window wipers? No. The APVCBB16 is designed specifically for the Toyota Prado 120 Series bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB16 accept? The APVCBB16 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is an antenna included with the APVCBB16? No. The APVCBB16 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB19 Rear Hinge Mount UHF Antenna Bracket Toyota FJ Cruiser An Australian designed and engineered vehicle-specific rear door hinge UHF antenna bracket for the Toyota FJ Cruiser (2011-2016), the APVCBB19 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the rear door (boot) hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB19 is a rear hinge mount UHF antenna bracket designed specifically for the Toyota FJ Cruiser from 2011-2016. Unlike bonnet hinge or mirror mount brackets, the APVCBB19 mounts to the rear door (boot) hinge using the vehicle's existing mounting points, providing an antenna mounting position suited to the FJ Cruiser's rear-opening door architecture. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct rear door operation. Features & Benefits Toyota FJ Cruiser 2011-2016 Specific Rear Door Hinge Mount Design: The APVCBB19 is engineered specifically for the Toyota FJ Cruiser from 2011-2016, using the rear door (boot) hinge as the mounting point to suit the FJ Cruiser's vehicle architecture. Rear Door Hinge Mount - No Modification Required: The APVCBB19 mounts to the rear door (boot) hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Rear Door Operation: The bracket is designed to maintain the full operating range of the rear door, preserving the vehicle's standard rear door functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota FJ Cruiser. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB19 is Australian designed and engineered for the specific requirements of the Toyota FJ Cruiser platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB19 Brand Aerpro Compatible Vehicles Toyota FJ Cruiser, 2011-2016 Mounting Position Rear Door Hinge (Boot) Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB19 is designed specifically for the Toyota FJ Cruiser from 2011-2016, mounting to the rear door (boot) hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific FJ Cruiser variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB19 require drilling or vehicle modification? No. The APVCBB19 mounts to the rear door (boot) hinge using the Toyota FJ Cruiser's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Why does the APVCBB19 mount to the rear door hinge rather than the bonnet hinge? The Toyota FJ Cruiser uses a side-opening rear door (boot) design rather than a conventional tailgate, and the vehicle's body architecture makes the rear door hinge the most suitable and accessible fixed mounting point for a UHF antenna bracket. The APVCBB19 is designed to take advantage of the existing rear door hinge mounting points on the FJ Cruiser for a clean, no-modification installation. Will the APVCBB19 affect rear door operation? No. The APVCBB19 is designed specifically for the Toyota FJ Cruiser rear door hinge profile and does not obstruct the operation of the rear door after installation. What size antenna thread does the APVCBB19 accept? The APVCBB19 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is an antenna included with the APVCBB19? No. The APVCBB19 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Garmin 010-02466-00 PowerSwitch Digital Switch Box 6-Output Bluetooth 12V A compact Bluetooth digital switch box providing centralised wireless control of up to six 12V vehicle accessories from a compatible Garmin navigator or smartphone app, the Garmin 010-02466-00 PowerSwitch delivers six switch outputs at up to 30 amps each, IPX7 weather resistance, and in-dash connectivity via Apple CarPlay and Android Auto. Product Overview The Garmin 010-02466-00 PowerSwitch is a digital switch box that replaces traditional manual switch panels with wireless touchscreen control of up to six 12V accessory circuits from a compatible Garmin navigator or smartphone running the Garmin PowerSwitch app. Each of the six switch outputs is rated at up to 30 amps, with a total system capacity of 100 amps across all outputs. Installation requires no cutting into the dashboard or routing wires through the firewall, and does not interfere with existing vehicle electronics. Control is via Bluetooth wireless connectivity to compatible Garmin navigators or smartphones. Up to four controllers can be paired to one PowerSwitch device, and up to four PowerSwitch devices can be controlled from a single controller. The Garmin PowerSwitch app supports Apple CarPlay and Android Auto, allowing switching functions to be accessed from a compatible in-dash infotainment display. Two hardwire control inputs accept signals from 3.3V to 18V for automatic output triggering, such as connecting the vehicle ignition to turn accessories on automatically at startup. Custom virtual switch panels with labels, icons, channel groups, dimming, and flashing controls are configurable through the app. The 010-02466-00 measures 12.5 x 3.2 x 7.5cm and weighs 283g, providing a compact footprint suited to mounting in side-by-sides, UTVs, ATVs, 4WDs, and snowmobiles. The unit is IPX7 weather resistant. The Garmin 010-02466-00 PowerSwitch is not intended for controlling motors with reverse polarity. Features & Benefits Six 30-Amp Switch Outputs - 100 Amps Total: The 010-02466-00 provides six independent switch outputs rated at up to 30 amps each, with a combined total capacity of 100 amps, allowing a wide range of 12V accessories including light bars, compressors, refrigerators, and communication radios to be controlled from a single device. Bluetooth Wireless Control via Compatible Garmin Navigator or Smartphone: The 010-02466-00 connects to compatible Garmin navigators or smartphones via Bluetooth, enabling wireless touchscreen control of all six outputs without physical switch panels or dashboard modifications. Garmin PowerSwitch App with Apple CarPlay and Android Auto Support: The Garmin PowerSwitch app enables control of switching functions and provides in-dash connectivity via Apple CarPlay and Android Auto on compatible in-dash infotainment displays, keeping accessory control accessible within the driver's existing touchscreen environment. Two Hardwire Control Inputs: The 010-02466-00 includes two hardwire control inputs that detect signals from 3.3V to 18V to trigger customisable outputs automatically. Common applications include connecting the vehicle ignition switch to automatically activate accessories at startup. Up to Four Controllers and Four Devices: Up to four controllers can be paired to one PowerSwitch device, and a single controller can manage up to four PowerSwitch devices simultaneously, providing scalability for complex accessory control setups. Customisable Virtual Switch Panels: The Garmin PowerSwitch app allows custom virtual switch panels to be created with user-defined labels, icons, and channel groups. Dimming and flashing controls for lighting systems are also supported, making light bar, rock light, and emergency flasher management straightforward from the touchscreen. IPX7 Weather Resistance: The 010-02466-00 is IPX7 rated, providing protection against water immersion up to 1 metre for 30 minutes, making it suitable for installation in exposed or outdoor vehicle environments including 4WDs, ATVs, and snowmobiles. No Dashboard Cutting or Firewall Routing Required: The installation process requires no cutting into the dashboard or routing of wires through the vehicle firewall, simplifying the installation and avoiding interference with existing vehicle electronics. Compact Form Factor for Flexible Mounting: At 12.5 x 3.2 x 7.5cm and 283g, the 010-02466-00 is compact enough to mount in a wide range of vehicle types and locations including side-by-sides, UTVs, ATVs, 4WDs, and snowmobiles. Technical Specs Specification Detail SKU 010-02466-00 Brand Garmin Dimensions 12.5 x 3.2 x 7.5cm (4.9 x 1.3 x 3.0") Weight 283g (10 oz) Water Rating IPX7 Number of Switch Outputs 6 Max Amps Per Switch Output 30A Max Total Amps 100A Number of Hardwire Inputs 2 Hardwire Input Voltage Range 3.3V to 18V Input Voltage 12V DC Wireless Connectivity Bluetooth Max Controllers per PowerSwitch 4 Max PowerSwitch Devices per Controller 4 CarPlay / Android Auto Support Yes (via Garmin PowerSwitch app) Customisable Switch Panels Yes (labels, icons, channel groups, dimming, flashing) Compatible App Garmin PowerSwitch App Reverse Polarity Motor Control Not intended for use What's in the Box Garmin 010-02466-00 PowerSwitch Power Cable Ground Cable Terminals Documentation Compatible With The Garmin 010-02466-00 PowerSwitch is compatible with the following Garmin navigators: Alpha XL, dēzl OTR610, OTR620, OTR710, OTR720, OTR810, OTR820, OTR1010, OTR1020, dēzlCam OTR710, dēzlCam OTR725, Overlander, RV 795, RV 890, RV 895, RV 1090, RV 1095, RVcam 795, Tread, Tread Base Edition, Tread Overland Edition, Tread SxS Edition, Tread 2, Tread 2 Overland Edition, Tread 2 SxS Edition, Tread XL Baja Chase Edition, Tread XL Baja Race Edition, Tread XL Overland Edition, zūmo XT, zūmo XT2, zūmo XT3. The Garmin PowerSwitch app is also available for compatible smartphones for wireless control without a dedicated Garmin navigator. The 010-02466-00 is not intended for controlling motors with reverse polarity. Frequently Asked Questions Does the Garmin 010-02466-00 PowerSwitch require a Garmin navigator to operate? No. The 010-02466-00 can be controlled via the Garmin PowerSwitch app on a compatible smartphone in addition to compatible Garmin navigators. A compatible device running the Garmin PowerSwitch app and paired to the PowerSwitch via Bluetooth is required for wireless control. How many accessories can be controlled from one Garmin 010-02466-00? One 010-02466-00 provides six independent switch outputs at up to 30 amps each. For larger setups, up to four PowerSwitch devices can be controlled from a single compatible navigator or smartphone, providing up to 24 independently controlled outputs from one display. Does the Garmin 010-02466-00 work with Apple CarPlay and Android Auto? Yes. The Garmin PowerSwitch app supports Apple CarPlay and Android Auto connectivity, allowing switching functions to be accessed and controlled from a compatible in-dash infotainment display that supports these platforms. Does installing the Garmin 010-02466-00 require cutting the dashboard or routing wires through the firewall? No. The 010-02466-00 is designed for installation without cutting into the dashboard or routing cables through the firewall, and does not interfere with existing vehicle electronics. What are the hardwire control inputs used for? The two hardwire control inputs accept signals from 3.3V to 18V and can be used to automatically trigger configured outputs. A common application is connecting the vehicle ignition switch to a control input so that selected accessories activate automatically each time the vehicle is started.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Enerdrive EN43520 20A MPPT Solar Charge Controller 12/24V A 20A MPPT solar charge controller for 12V and 24V systems, the Enerdrive EN43520 uses advanced MPPT control algorithm with up to 99.5% tracking efficiency and 98.3% maximum DC/DC transfer efficiency, with self-adaptive three-stage charging, LCD display, IP33 protection, and RS485 communications port. Product Overview The Enerdrive EN43520 is a 20A MPPT solar charge controller designed for 12V and 24V DC systems with automatic voltage selection. It supports recommended PV array power of up to 300W at 12V and 600W at 24V, with overdrive capability up to 360W at 12V and 720W at 24V. The MPPT control algorithm minimises maximum power point loss rate and loss time, tracking the MPP of the PV array to extract maximum energy under any conditions, delivering 20-30% greater energy utilisation compared to PWM charging methods. The EN43520 uses a self-adaptive three-stage digital charging mode to prolong battery lifespan and improve system performance, and supports both lead-acid and lithium battery types. Comprehensive electronic protection covers overcharge, over discharge, and PV and battery reverse polarity. The MPPT voltage range runs from battery voltage plus 2V up to 72V, with maximum PV open circuit voltage of 100V at minimum operating temperature and 92V at 25°C. The unit includes an LCD display with configurable backlight timeout, an RS485 interface via RJ45 for communications, and IP33 ingress protection with isolated RS485 design. CE certified to LVD EN/IEC62109 and EMC EN61000-6-1/3. Suitable for RV, marine, remote off-grid monitoring, and other applications. Features & Benefits Advanced MPPT Control Algorithm - Up to 99.5% Tracking Efficiency: The EN43520 uses an advanced MPPT algorithm with ultra-fast tracking speed to minimise MPP loss rate and loss time, accurately recognising and tracking multi-peak maximum power points for up to 99.5% tracking efficiency across varying solar conditions. 98.3% Maximum DC/DC Transfer Efficiency: Maximum DC/DC transfer efficiency of 98.3% ensures minimal energy loss between the PV array and battery bank, maximising the usable energy yield from the connected solar panels. 20-30% Greater Energy Utilisation than PWM Charging: The MPPT charging method increases the ratio of energy utilisation in the solar system by 20-30% compared with PWM charging methods, delivering more charge to the battery from the same PV array. Self-Adaptive Three-Stage Charging Mode: The digital control circuit-based three-stage charging mode adapts to battery conditions to effectively prolong battery lifespan and improve overall system performance across both lead-acid and lithium battery types. Supports Lead-Acid and Lithium Batteries: The EN43520 is compatible with both lead-acid and lithium battery systems. When lithium batteries are used, the system voltage cannot be identified automatically and the temperature compensation coefficient must be set to 0. 12/24V Auto-Select Nominal Voltage: The EN43520 automatically selects 12V or 24V operation based on the connected battery system, supporting battery voltage ranges from 8V to 32V. Automatic voltage selection is not available when lithium batteries are used. Comprehensive Electronic Protection: Built-in protection covers overcharge, over discharge, and PV and battery reverse polarity, protecting both the controller and connected battery and PV systems from common fault conditions. LCD Display with Configurable Backlight: The integrated LCD display provides real-time monitoring of system data and energy statistics. Backlight timeout is configurable from 0 to 999 seconds, with OS mode keeping the backlight on continuously. IP33 Ingress Protection with Isolated RS485: IP33 rated ingress protection and an isolated RS485 interface via RJ45 connector improve reliability in RV, marine, and remote installation environments and support communications for future application integration. Automatic Power Reduction Over Temperature: When internal temperature reaches 81°C, the controller automatically reduces charging power to protect the unit, allowing full load operation across the -25°C to +50°C environmental temperature range below this threshold. CE Certified: The EN43520 holds CE certification to LVD EN/IEC62109 and EMC EN61000-6-1/3 standards. Technical Specs Specification Detail SKU EN43520 Brand Enerdrive Nominal Voltage Range 12/24V DC Auto Select Battery Voltage Range 8-32V Maximum Battery Current Output 20A Maximum Load Current Output 20A Maximum PV Open Circuit Voltage 100V (at minimum operating temperature), 92V (at 25°C) MPPT Voltage Range (Battery Voltage + 2V) to 72V Maximum PV Array Power Recommended 300W at 12V, 600W at 24V Maximum PV Array Power Allowed (Overdrive) 360W at 12V, 720W at 24V Maximum Efficiency 98.3% Tracking Efficiency Up to 99.5% Self Consumption 30mA (12V), 16mA (24V) Temperature Compensation Coefficient -3mV/°C/12V (default) Grounding Common Negative RS485 Interface 5VDC/200mA (RJ45) LCD Backlight Timeout Default 60s, Range 0-999s Battery Types Supported Lead-Acid, Lithium IP Rating IP33 Environmental Temperature -25°C to +50°C Storage Temperature -20°C to +70°C Relative Humidity 95% N.C. Dimensions (L x W x H) 217 x 158 x 56.5mm Mounting Hole Dimensions 160 x 149mm Mounting Hole Size 5mm Maximum Cable Size 10AWG (6mm²) Recommended Cable Size 10AWG (6mm²) Certification CE (LVD EN/IEC62109, EMC EN61000-6-1/3) Compatible With The EN43520 is compatible with 12V and 24V DC battery systems including lead-acid and lithium batteries within a voltage range of 8-32V. The MPPT voltage range of battery voltage plus 2V to 72V supports a wide range of PV panel configurations. Maximum recommended PV array power is 300W at 12V and 600W at 24V. Overdrive is supported up to 360W at 12V and 720W at 24V. When lithium batteries are used, automatic voltage selection is not available and the temperature compensation coefficient must be set to 0. Suitable for RV, marine, remote off-grid monitoring, and similar applications. Frequently Asked Questions What is the difference between MPPT and PWM solar charge controllers? MPPT (Maximum Power Point Tracking) controllers continuously track the maximum power point of the PV array and convert excess voltage into additional charge current, increasing energy utilisation by 20-30% compared to PWM (Pulse Width Modulation) controllers. PWM controllers directly connect the PV array to the battery and do not optimise power conversion. The EN43520's advanced MPPT algorithm achieves up to 99.5% tracking efficiency with a maximum DC/DC transfer efficiency of 98.3%. Does the EN43520 support lithium batteries? Yes. The EN43520 supports lithium batteries. When lithium batteries are used, the system voltage cannot be identified automatically and must be configured manually. The temperature compensation coefficient must also be set to 0 when using lithium batteries. What is the maximum solar panel wattage I can connect to the EN43520? The recommended maximum PV array power is 300W for a 12V system and 600W for a 24V system. Overdrive operation is supported up to 360W at 12V and 720W at 24V. The maximum PV open circuit voltage is 100V at minimum operating temperature and 92V at 25°C. What does the RS485 interface on the EN43520 provide? The EN43520 includes an RS485 communications port via RJ45 connector rated at 5VDC/200mA. The isolated RS485 design improves controller reliability and supports communications connectivity for future application integration and remote monitoring setups. What protection does the EN43520 include? The EN43520 provides comprehensive electronic protection covering overcharge, over discharge, and PV and battery reverse polarity. Automatic power reduction activates when the internal temperature reaches 81°C. The unit is also IP33 rated for ingress protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Enerdrive EN43540 40A MPPT Solar Charge Controller 12/24V A 40A MPPT solar charge controller for 12V and 24V systems, the Enerdrive EN43540 uses advanced MPPT control algorithm with up to 99.5% tracking efficiency and 98.6% maximum DC/DC transfer efficiency, with self-adaptive three-stage charging, LCD display, IP33 protection, and RS485 communications port. Product Overview The Enerdrive EN43540 is a 40A MPPT solar charge controller designed for 12V and 24V DC systems with automatic voltage selection. It supports recommended PV array power of up to 600W at 12V and 1200W at 24V, with overdrive capability up to 720W at 12V and 1440W at 24V. The MPPT control algorithm minimises maximum power point loss rate and loss time, tracking the MPP of the PV array to extract maximum energy under any conditions, delivering 20-30% greater energy utilisation compared to PWM charging methods. The EN43540 uses a self-adaptive three-stage digital charging mode to prolong battery lifespan and improve system performance, and supports both lead-acid and lithium battery types. Comprehensive electronic protection covers overcharge, over discharge, and PV and battery reverse polarity. The MPPT voltage range runs from battery voltage plus 2V up to 72V, with maximum PV open circuit voltage of 100V at minimum operating temperature and 92V at 25°C. The unit includes an LCD display with configurable backlight timeout, an RS485 interface via RJ45 for communications, and IP33 ingress protection with isolated RS485 design. CE certified to LVD EN/IEC62109 and EMC EN61000-6-1/3. Suitable for RV, marine, remote off-grid monitoring, and other applications. Features & Benefits Advanced MPPT Control Algorithm - Up to 99.5% Tracking Efficiency: The EN43540 uses an advanced MPPT algorithm with ultra-fast tracking speed to minimise MPP loss rate and loss time, accurately recognising and tracking multi-peak maximum power points for up to 99.5% tracking efficiency across varying solar conditions. 98.6% Maximum DC/DC Transfer Efficiency: Maximum DC/DC transfer efficiency of 98.6% ensures minimal energy loss between the PV array and battery bank, maximising the usable energy yield from the connected solar panels. 20-30% Greater Energy Utilisation than PWM Charging: The MPPT charging method increases the ratio of energy utilisation in the solar system by 20-30% compared with PWM charging methods, delivering more charge to the battery from the same PV array. Self-Adaptive Three-Stage Charging Mode: The digital control circuit-based three-stage charging mode adapts to battery conditions to effectively prolong battery lifespan and improve overall system performance across both lead-acid and lithium battery types. Supports Lead-Acid and Lithium Batteries: The EN43540 is compatible with both lead-acid and lithium battery systems. When lithium batteries are used, the system voltage cannot be identified automatically and the temperature compensation coefficient must be set to 0. 12/24V Auto-Select Nominal Voltage: The EN43540 automatically selects 12V or 24V operation based on the connected battery system, supporting battery voltage ranges from 8V to 32V. Automatic voltage selection is not available when lithium batteries are used. Comprehensive Electronic Protection: Built-in protection covers overcharge, over discharge, and PV and battery reverse polarity, protecting both the controller and connected battery and PV systems from common fault conditions. LCD Display with Configurable Backlight: The integrated LCD display provides real-time monitoring of system data and energy statistics. Backlight timeout is configurable from 0 to 999 seconds, with OS mode keeping the backlight on continuously. IP33 Ingress Protection with Isolated RS485: IP33 rated ingress protection and an isolated RS485 interface via RJ45 connector improve reliability in RV, marine, and remote installation environments and support communications for future application integration. Automatic Power Reduction Over Temperature: When internal temperature reaches 81°C, the controller automatically reduces charging power to protect the unit, allowing full load operation across the -25°C to +50°C environmental temperature range below this threshold. CE Certified: The EN43540 holds CE certification to LVD EN/IEC62109 and EMC EN61000-6-1/3 standards. Technical Specs Specification Detail SKU EN43540 Brand Enerdrive Nominal Voltage Range 12/24V DC Auto Select Battery Voltage Range 8-32V Maximum Battery Current Output 40A Maximum Load Current Output 40A Maximum PV Open Circuit Voltage 100V (at minimum operating temperature), 92V (at 25°C) MPPT Voltage Range (Battery Voltage + 2V) to 72V Maximum PV Array Power Recommended 600W at 12V, 1200W at 24V Maximum PV Array Power Allowed (Overdrive) 720W at 12V, 1440W at 24V Maximum Efficiency 98.6% Tracking Efficiency Up to 99.5% Self Consumption 30mA (12V), 16mA (24V) Temperature Compensation Coefficient -3mV/°C/12V (default) Grounding Common Negative RS485 Interface 5VDC/200mA (RJ45) LCD Backlight Timeout Default 60s, Range 0-999s Battery Types Supported Lead-Acid, Lithium IP Rating IP33 Environmental Temperature -25°C to +50°C Storage Temperature -20°C to +70°C Relative Humidity 95% N.C. Dimensions (L x W x H) 255 x 185 x 67.8mm Mounting Hole Dimensions 200 x 176mm Mounting Hole Size 5mm Maximum Cable Size 6AWG (13.2mm²) Recommended Cable Size 6AWG (13.2mm²) Certification CE (LVD EN/IEC62109, EMC EN61000-6-1/3) Compatible With The EN43540 is compatible with 12V and 24V DC battery systems including lead-acid and lithium batteries within a voltage range of 8-32V. The MPPT voltage range of battery voltage plus 2V to 72V supports a wide range of PV panel configurations. Maximum recommended PV array power is 600W at 12V and 1200W at 24V. Overdrive is supported up to 720W at 12V and 1440W at 24V. When lithium batteries are used, automatic voltage selection is not available and the temperature compensation coefficient must be set to 0. Suitable for RV, marine, remote off-grid monitoring, and similar applications. Frequently Asked Questions What is the difference between MPPT and PWM solar charge controllers? MPPT (Maximum Power Point Tracking) controllers continuously track the maximum power point of the PV array and convert excess voltage into additional charge current, increasing energy utilisation by 20-30% compared to PWM (Pulse Width Modulation) controllers. PWM controllers directly connect the PV array to the battery and do not optimise power conversion. The EN43540's advanced MPPT algorithm achieves up to 99.5% tracking efficiency with a maximum DC/DC transfer efficiency of 98.6%. Does the EN43540 support lithium batteries? Yes. The EN43540 supports lithium batteries. When lithium batteries are used, the system voltage cannot be identified automatically and must be configured manually. The temperature compensation coefficient must also be set to 0 when using lithium batteries. What is the maximum solar panel wattage I can connect to the EN43540? The recommended maximum PV array power is 600W for a 12V system and 1200W for a 24V system. Overdrive operation is supported up to 720W at 12V and 1440W at 24V. The maximum PV open circuit voltage is 100V at minimum operating temperature and 92V at 25°C. What does the RS485 interface on the EN43540 provide? The EN43540 includes an RS485 communications port via RJ45 connector rated at 5VDC/200mA. The isolated RS485 design improves controller reliability and supports communications connectivity for future application integration and remote monitoring setups. What protection does the EN43540 include? The EN43540 provides comprehensive electronic protection covering overcharge, over discharge, and PV and battery reverse polarity. Automatic power reduction activates when the internal temperature reaches 81°C. The unit is also IP33 rated for ingress protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9725 Toyota Landcruiser 300 Series 06/2022-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Toyota Landcruiser 300 Series (June 2022-on), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9725 is a bonnet mount antenna bracket designed specifically for the Toyota Landcruiser 300 Series (June 2022-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9725 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of the vehicle. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Toyota Landcruiser 300 Series, providing a clean and secure antenna mounting position. Vehicle-Specific Fit: Engineered specifically for the Toyota Landcruiser 300 Series (June 2022-on) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9725 Brand Hulk 4x4 Compatible Vehicle Toyota Landcruiser 300 Series 06/2022-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675450 Compatible With Toyota Landcruiser 300 Series 06/2022-on (Passenger Side) Frequently Asked Questions Is the HU9725 compatible with Landcruiser 300 Series models before June 2022? No. The HU9725 is designed for the Toyota Landcruiser 300 Series from June 2022-on. Please contact us to confirm the correct bracket for earlier Landcruiser variants. Is a driver-side version of this bracket available? The HU9725 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Toyota Landcruiser 300 Series. What type of antenna is compatible with this bracket? The HU9725 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9725 is a bolt-on bracket designed for vehicle-specific fitment on the Toyota Landcruiser 300 Series bonnet. Please refer to the product instructions or contact us for installation guidance. Does the bracket affect the operation of the bonnet or wipers? The HU9725 is a bonnet mount bracket. Please refer to the installation instructions and confirm fitment details with us before installation if you have concerns about interference with bonnet operation or wiper function.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9730 Mitsubishi Triton MR 2018-2023 Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Mitsubishi Triton MR (2018-2023), finished in black powder coat for enhanced corrosion resistance. Includes extra hardware nuts. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9730 is a bonnet mount antenna bracket designed specifically for the Mitsubishi Triton MR (2018-2023). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9730 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of the vehicle. Extra hardware nuts are included. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Mitsubishi Triton MR, providing a clean and secure antenna mounting position. Extra Hardware Included: Additional nuts are included in the pack for a complete installation. Vehicle-Specific Fit: Engineered specifically for the Mitsubishi Triton MR (2018-2023) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9730 Brand Hulk 4x4 Compatible Vehicle Mitsubishi Triton MR 2018-2023 Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Included Extra Hardware Nuts Barcode 9356659675504 What's in the Box HU9730 Bonnet Mount Antenna Bracket Extra Hardware Nuts Compatible With Mitsubishi Triton MR 2018-2023 (Passenger Side) Frequently Asked Questions Is the HU9730 compatible with Triton models outside the 2018-2023 MR range? No. The HU9730 is designed specifically for the Mitsubishi Triton MR (2018-2023). Please contact us to confirm the correct bracket for earlier or later Triton variants. Is a driver-side version of this bracket available? The HU9730 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Mitsubishi Triton MR. What type of antenna is compatible with this bracket? The HU9730 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9730 is a bolt-on bracket designed for vehicle-specific fitment on the Mitsubishi Triton MR bonnet. Please refer to the product instructions or contact us for installation guidance. Does the bracket include all hardware required for installation? Extra hardware nuts are included. Please refer to the product instructions or contact us to confirm whether additional hardware is required for your specific installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9726 Next Gen Ford Ranger and Everest 2022-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Next Gen Ford Ranger and Ford Everest (2022-on), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9726 is a bonnet mount antenna bracket designed specifically for the Next Gen Ford Ranger and Ford Everest (2022-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9726 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of both vehicles. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Next Gen Ford Ranger and Everest, providing a clean and secure antenna mounting position. Suits Both Ford Ranger and Ford Everest: A single bracket covers both the Next Gen Ford Ranger and Ford Everest (2022-on) platforms, providing compatibility across both popular Ford 4WD models. Vehicle-Specific Fit: Engineered specifically for the Next Gen Ford Ranger and Everest (2022-on) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9726 Brand Hulk 4x4 Compatible Vehicles Ford Ranger 2022-on, Ford Everest 2022-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675467 Compatible With Ford Ranger 2022-on (Next Gen, Passenger Side) Ford Everest 2022-on (Passenger Side) Frequently Asked Questions Is the HU9726 compatible with Ford Ranger models before 2022? No. The HU9726 is designed for the Next Gen Ford Ranger and Everest from 2022-on. Please contact us to confirm the correct bracket for earlier Ford Ranger or Everest variants. Does the HU9726 fit both the Ford Ranger and Ford Everest? Yes. The HU9726 is compatible with both the Next Gen Ford Ranger (2022-on) and the Ford Everest (2022-on), covering both platforms with a single bracket. Is a driver-side version of this bracket available? The HU9726 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Next Gen Ford Ranger and Everest. What type of antenna is compatible with this bracket? The HU9726 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9726 is a bolt-on bracket designed for vehicle-specific fitment on the Next Gen Ford Ranger and Everest bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9727 Nissan Patrol Y62 2020-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Nissan Patrol Y62 (2020-on), finished in black powder coat for enhanced corrosion resistance. Includes extra hardware nuts. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9727 is a bonnet mount antenna bracket designed specifically for the Nissan Patrol Y62 (2020-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9727 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet. Extra hardware nuts are included. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Nissan Patrol Y62, providing a clean and secure antenna mounting position. Extra Hardware Included: Additional nuts are included in the pack for a complete installation. Vehicle-Specific Fit: Engineered specifically for the Nissan Patrol Y62 (2020-on) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9727 Brand Hulk 4x4 Compatible Vehicle Nissan Patrol Y62 2020-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Included Extra Hardware Nuts Barcode 9356659675474 What's in the Box HU9727 Bonnet Mount Antenna Bracket Extra Hardware Nuts Compatible With Nissan Patrol Y62 2020-on (Passenger Side) Frequently Asked Questions Is the HU9727 compatible with Nissan Patrol Y62 models before 2020? No. The HU9727 is designed for the Nissan Patrol Y62 from 2020-on. Please contact us to confirm the correct bracket for earlier Y62 or other Patrol variants. Is a driver-side version of this bracket available? The HU9727 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Nissan Patrol Y62. What type of antenna is compatible with this bracket? The HU9727 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Does the bracket include all hardware required for installation? Extra hardware nuts are included. Please refer to the product instructions or contact us to confirm whether additional hardware is required for your specific installation. Is installation straightforward for a DIY install? The HU9727 is a bolt-on bracket designed for vehicle-specific fitment on the Nissan Patrol Y62 bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9720 Isuzu D-Max, MUX and Mazda BT-50 2021-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 (2021-on), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9720 is a bonnet mount antenna bracket designed specifically for the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 (2021-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9720 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet across all three compatible models. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Isuzu D-Max, MUX, and Mazda BT-50, providing a clean and secure antenna mounting position. Three-Model Compatibility: A single bracket covers the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 (all 2021-on), providing compatibility across three popular platforms that share a common bonnet mounting configuration. Vehicle-Specific Fit: Engineered specifically for the 2021-on generation of the D-Max, MUX, and BT-50 for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9720 Brand Hulk 4x4 Compatible Vehicles Isuzu D-Max 2021-on, Isuzu MUX 2021-on, Mazda BT-50 2021-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675368 Compatible With Isuzu D-Max 2021-on (Passenger Side) Isuzu MUX 2021-on (Passenger Side) Mazda BT-50 2021-on (Passenger Side) Frequently Asked Questions Is the HU9720 compatible with Isuzu D-Max or Mazda BT-50 models before 2021? No. The HU9720 is designed for the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 from 2021-on. Please contact us to confirm the correct bracket for earlier generation variants. Does the HU9720 fit the Isuzu MUX as well as the D-Max? Yes. The HU9720 is confirmed compatible with the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 from 2021-on, covering all three models with a single bracket. Is a driver-side version of this bracket available? The HU9720 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for these vehicles. What type of antenna is compatible with this bracket? The HU9720 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9720 is a bolt-on bracket designed for vehicle-specific fitment. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less