GMF4x4 002D-ST2-BB Nissan Navara NP300 2015-2022 Driver Side Bonnet Bracket Strut Type 2 Purpose-built for the Nissan Navara NP300 2015-2022, the GMF4x4 002D-ST2-BB is a driver side bonnet bracket strut kit designed specifically for the NP300 platform and proudly made in Australia. Product Overview The GMF4x4 002D-ST2-BB is a Strut Type 2 driver side bonnet bracket kit engineered specifically for the Nissan Navara NP300 2015 to 2022. Designed and manufactured in Australia by GMF4x4, these brackets are made to order with a two week lead time before dispatch. All hardware and mounts are included in the kit. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Please measure your vehicle carefully and refer to the listing photos to ensure the correct strut type is selected before ordering. Features & Benefits Designed specifically for the Nissan Navara NP300 2015-2022, the 002D-ST2-BB provides a precise, vehicle-specific fit for the driver side bonnet without the need for custom fabrication or modification. All hardware and mounts are included, providing everything required for installation in a single kit. Proudly made in Australia, GMF4x4 bonnet bracket kits are manufactured to a professional standard with designs, patents, and trademarks registered in Australia and internationally, reflecting the quality and engineering behind each product. Technical Specs Specification Detail SKU 002D-ST2-BB Brand GMF4x4 Compatible Vehicle Nissan Navara NP300 2015-2022 Side Driver Strut Type Type 2 Included All hardware and mounts Origin Made in Australia Lead Time Made to order — approx. 2 weeks before dispatch Compatible With Nissan Navara NP300 2015-2022 (Driver Side) Please measure your vehicle and refer to the listing photos to confirm the correct strut type before ordering. Frequently Asked Questions How do I know which strut type I need for my Navara NP300? GMF4x4 offer multiple strut types for the Navara NP300. Please measure your vehicle carefully and refer to the photos included in the product listing to identify the correct strut type for your specific build before placing your order. If you are unsure, contact us before purchasing. Why is there a two week lead time on this product? The 002D-ST2-BB is made to order. GMF4x4 manufacture each bracket kit upon receiving the order rather than holding pre-built stock, ensuring a fresh, quality-built product for every customer. Please allow approximately two weeks from order placement before dispatch. Are screws and mounting hardware included? Yes. All hardware and mounts required for installation are included in the kit. Is this bracket made in Australia? Yes. GMF4x4 bonnet bracket kits are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally across their product range. Can this bracket be used on the passenger side? No. The 002D-ST2-BB is specifically designed for the driver side of the Nissan Navara NP300 2015-2022. A separate passenger side bracket would be required for dual-side installations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 002D-ST1-BB Nissan Navara NP300 2015-2022 Driver Side Bonnet Bracket Strut Type 1 Purpose-built for the Nissan Navara NP300 2015-2022, the GMF4x4 002D-ST1-BB is a driver side bonnet bracket strut kit designed specifically for the NP300 platform and proudly made in Australia. Product Overview The GMF4x4 002D-ST1-BB is a Strut Type 1 driver side bonnet bracket kit engineered specifically for the Nissan Navara NP300 2015 to 2022. Designed and manufactured in Australia by GMF4x4, these brackets are made to order with a two week lead time before dispatch. All hardware and mounts are included in the kit. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Please measure your vehicle carefully and refer to the listing photos to ensure the correct strut type is selected before ordering. Features & Benefits Designed specifically for the Nissan Navara NP300 2015-2022, the 002D-ST1-BB provides a precise, vehicle-specific fit for the driver side bonnet without the need for custom fabrication or modification. All hardware and mounts are included, providing everything required for installation in a single kit. Proudly made in Australia, GMF4x4 bonnet bracket kits are manufactured to a professional standard with designs, patents, and trademarks registered in Australia and internationally, reflecting the quality and engineering behind each product. Technical Specs Specification Detail SKU 002D-ST1-BB Brand GMF4x4 Compatible Vehicle Nissan Navara NP300 2015-2022 Side Driver Strut Type Type 1 Included All hardware and mounts Origin Made in Australia Lead Time Made to order — approx. 2 weeks before dispatch Compatible With Nissan Navara NP300 2015-2022 (Driver Side) Please measure your vehicle and refer to the listing photos to confirm the correct strut type before ordering. Frequently Asked Questions How do I know which strut type I need for my Navara NP300? GMF4x4 offer multiple strut types for the Navara NP300. Please measure your vehicle carefully and refer to the photos included in the product listing to identify the correct strut type for your specific build before placing your order. If you are unsure, contact us before purchasing. Why is there a two week lead time on this product? The 002D-ST1-BB is made to order. GMF4x4 manufacture each bracket kit upon receiving the order rather than holding pre-built stock, ensuring a fresh, quality-built product for every customer. Please allow approximately two weeks from order placement before dispatch. Are screws and mounting hardware included? Yes. All hardware and mounts required for installation are included in the kit. Is this bracket made in Australia? Yes. GMF4x4 bonnet bracket kits are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally across their product range. Can this bracket be used on the passenger side? No. The 002D-ST1-BB is specifically designed for the driver side of the Nissan Navara NP300 2015-2022. A separate passenger side bracket would be required for dual-side installations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 252-AW-S Short Awning Bracket for Ford Ranger Wildtrak Next Gen 2022.5+ A vehicle-specific short awning bracket pair for the Ford Ranger Wildtrak Next Gen (2022.5+), designed and manufactured in Australia by GMF4x4. The brackets clamp securely around the rail profile and offer adjustable positioning to suit any brand of awning on the market. Price covers a pair of two mounts. Product overview The GMF4x4 252-AW-S is engineered specifically for the Ford Ranger Wildtrak Next Gen from 2022.5 onwards. Rather than drilling into the vehicle, the brackets clamp around the existing rail profile, allowing the mount position to be adjusted to suit different awning sizes and setups. Any brand of awning currently on the market is compatible with this mounting system. Each purchase includes two bracket mounts supplied as a pair. GMF4x4 holds registered designs, patents, and trademarks in Australia and internationally covering this bracket design. Features and benefits Rail clamp mounting system: Brackets clamp securely around the existing rail profile on the Ranger Wildtrak Next Gen, eliminating the need for drilling or permanent modification to the vehicle. Adjustable mount positioning: The clamp design allows the bracket position along the rail to be adjusted, accommodating different awning sizes and preferred mounting locations. Universal awning compatibility: Designed to accept any brand of awning currently available on the market, giving full flexibility over awning choice. Sold as a pair: Each purchase includes two bracket mounts, providing everything needed for a complete awning installation on one side of the vehicle. Australian made: Designed and manufactured in Australia by GMF4x4, which holds registered designs, patents, and trademarks covering this product locally and internationally. Technical specs Specification Detail SKU 252-AW-S Brand GMF4x4 Compatible Vehicle Ford Ranger Wildtrak Next Gen 2022.5+ Bracket Variant Short Mount Type Rail clamp, adjustable position Sold As Pair (2 mounts) Country of Manufacture Australia Compatible with The GMF4x4 252-AW-S is designed specifically for the Ford Ranger Wildtrak Next Gen (2022.5+). It is not confirmed to fit other Ranger variants or model years outside this specification. Contact us if you are unsure whether this bracket suits your vehicle. Frequently asked questions Does the 252-AW-S require any drilling or permanent modification to the vehicle?No. The brackets clamp around the existing rail profile, so no drilling or permanent modification to the vehicle is required. How many brackets are included in the purchase?Each purchase includes two bracket mounts, supplied as a pair. What is the difference between the short and long variants of this bracket?The 252-AW-S is the short variant. The source data does not detail the dimensional differences between variants. Contact us for further guidance on which variant suits your awning setup. Will this bracket work with any brand of awning?Yes. The 252-AW-S is designed to accept any brand of awning currently available on the market. Is the GMF4x4 252-AW-S covered by any design protection?Yes. GMF4x4 holds registered designs, patents, and trademarks covering this bracket in Australia and internationally. Contact us for further information. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer Support If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Jump-Start Any Vehicle Anywhere with 800 Amps of Portable Lithium Power Product Overview The Hulk 4x4 HU6510 is a compact lithium-ion jump starter built to get you back on the road without waiting on a service vehicle. Packing 10,400mAh of lithium cobalt battery capacity and a peak output of 800 amps, it's rated to start petrol engines up to 6.0L and diesel engines up to 3.0L, making it a solid option for everything from daily drivers to bigger 4WDs and utes. Beyond jump-starting, the HU6510 doubles as a portable power bank with dual USB ports, dual USB-C inputs, and 10W wireless charging for compatible devices, plus a multi-mode LED flashlight with SOS and strobe functions. It's protected against reverse polarity, short circuits, over-discharge, and overheating, and comes packed in an EVA protective carry case so it can live in the vehicle ready to go when needed. Features & Benefits 800A peak / 300A starting current – enough grunt to start petrol engines up to 6.0L and diesel engines up to 3.0L, handy for tradies and 4WD owners who can't always get to a workshop Spark-proof, reverse polarity clamps – safer connection when jump-starting in low light or awkward engine bays 10W wireless charging + dual USB-C inputs – charge the unit itself or top up phones and devices without extra cables, useful on long touring trips Multi-function LED display – shows battery charge and current levels at a glance so you're not guessing before a start attempt Multi-mode LED flashlight (solid/SOS/strobe) – doubles as an emergency light for roadside breakdowns or camp use Rubberised tyre-tread housing – built to handle being tossed in a tool box, ute tray, or glovebox without cracking EVA protective carry case included – keeps the unit and cables together and protected in storage Technical Specs Specification Detail Battery type Lithium Cobalt Battery capacity 10,400mAh Starting current 300A Peak current 800A Charging time 2–4 hours Input 15V 1A (USB) Output 5V 3A Wireless charging 10W (compatible devices only) Inputs Dual USB-C Outputs Dual USB Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +70°C Dimensions 158mm (L) x 75mm (W) x 31mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 6.0L engine capacity Diesel vehicles up to 3.0L engine capacity Most USB and USB-C chargeable devices (phones, tablets, cameras) Qi-compatible wireless charging devices 4WD, ute, and touring setups where a spare power source and light source are handy in one unit Weight 1.0kg Frequently Asked Questions Will this start my 4WD or ute? Yes, it's rated to jump-start petrol engines up to 6.0L and diesel engines up to 3.0L, which covers most utes and 4WDs on Australian roads. How long does it take to fully charge? The HU6510 takes approximately 2–4 hours to charge fully from the included USB charging cable. Can I use it to charge my phone? Yes, it has dual USB output ports plus 10W wireless charging for compatible devices, so it works as a portable power bank too. Is it safe if I connect the clamps the wrong way? Yes, the clamps are spark-proof with reverse polarity protection, and the unit also has short circuit, over-discharge, and overheat protection. How many jump starts can I expect from one charge? This depends on engine size and condition, but the 10,400mAh lithium battery and 800A peak output are designed for multiple start attempts per charge under normal conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Biggest Jump Starter in the Hulk 4x4 Range 2,500 Amps of High-Density Lithium Power Product Overview The Hulk 4x4 HU6512 sits at the top of the Hulk jump starter range, packing 28,000mAh of high energy density lithium cobalt battery capacity and a 2,500A peak output to handle the most demanding engine starts petrol up to 10.0L and diesel up to 8.0L. That puts it in range for heavy 4WDs, large commercial vehicles, trucks, and high-displacement diesel rigs where a standard jump starter simply won't cut it. Like the rest of the Hulk range, it doubles as a portable multi-output power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and an included laptop adaptor harness and 240V AC charger. The multi-mode LED flashlight, multi-function LED display, and rubberised housing round it out as a practical all-in-one emergency kit for serious touring, worksite, and remote use. Features & Benefits 2,500A peak / 1,200A starting current — the highest output in the Hulk 4x4 jump starter range; rated for petrol engines up to 10.0L and diesel engines up to 8.0L, covering heavy trucks and the largest 4WDs on the road 28,000mAh high energy density lithium cobalt battery — larger reserve capacity than lower models means more start attempts and longer device charging between recharges Spark-proof, reverse polarity clamps — safer clamping under the bonnet, particularly useful on large engine bays and in remote or low-light conditions Multi-voltage DC output (12V / 16V / 19V at 3.5A) — charges laptops and DC-powered devices without needing mains power; dual 12V and 19V outlets both rated at 3.5A Full accessory kit included — 240V AC charger, car charger adaptor, laptop adaptor harness, and 4-in-1 USB cable cover virtually every charging scenario Multi-function LED display — shows battery charge level and current draw before and during a start attempt Multi-mode LED flashlight (solid/SOS/strobe) — practical for roadside breakdowns, remote camping, or emergency signalling Black and grey rubberised housing — impact-resistant construction for life in a ute tray, toolbox, or boot EVA protective carry case — keeps all accessories and clamps together and protected during storage Technical Specs Specification Detail Battery type Lithium Cobalt Battery capacity 28,000mAh Starting current 1,200A Peak current 2,500A Charging time 5–8 hours Input (USB) 15V 1A Input (secondary) 18V 2A USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets Dual 12V and 19V (both 3.5A) Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 183mm (L) x 119mm (W) x 45mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 8.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB-chargeable devices (phones, tablets, cameras) via dual USB ports Heavy 4WDs, trucks, and large commercial vehicles requiring high-current emergency starting Weight 3.04kg (shipping weight including packaging) Frequently Asked Questions How does the HU6512 compare to the smaller Hulk jump starters? The HU6512 is the top-tier model, offering the largest battery (28,000mAh), highest peak current (2,500A), and widest diesel engine rating (up to 8.0L) in the Hulk 4x4 jump starter range. Will it start large diesel trucks or commercial vehicles? Yes — the 2,500A peak output and 8.0L diesel rating make it suitable for heavy 4WDs, large utes, and light commercial vehicles that lower-rated starters can't handle. What's the difference between the 15V and 18V inputs? The unit accepts both a 15V 1A USB input and an 18V 2A secondary input, giving you flexibility to recharge via the included car charger adaptor or 240V AC charger. Can I charge a laptop directly from the HU6512? Yes — it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), plus dual 12V and 19V outlets, covering most laptop charging requirements. How long does the HU6512 take to fully charge? Expect 5–8 hours from flat to full using the included 240V AC charger or car charger adaptor, depending on the input source.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Professional-Grade 12V/24V Jump Starter Built for Heavy Machinery, Trucks, and Zero-Downtime Operations Product Overview The Hulk 4x4 HU6514 is a professional-series heavy-duty jump starter engineered for operators who can't afford downtime. With 80,000mAh (296Wh) of lithium cobalt battery capacity and a 15,000A peak output on 12V systems (6,000A on 24V), it's built for the kind of equipment that smaller portable starters simply can't touch semi-trucks, buses, heavy plant, agricultural machinery, and large diesel engines across construction, mining, and transport industries. Unlike compact jump starters, the HU6514 features integrated jumper cables, dual 12V/24V output voltage, and a rated lifetime of up to 5,000 starts. It also functions as a multi-output portable power station with four USB-A ports, USB-C input/output, and dual 12V DC auxiliary ports making it a practical on-site power hub beyond its jump-starting role. Features & Benefits 15,000A peak (12V) / 6,000A peak (24V) — handles the starting demands of semi-trucks, large diesel plant, and heavy commercial vehicles that lower-rated starters can't manage 80,000mAh / 296Wh lithium cobalt battery — massive reserve capacity designed for repeated heavy-duty use on-site or in the field Up to 5,000 estimated lifetime jump starts — long-term reliability for fleet operators and plant managers, not just occasional roadside use Integrated jumper cables — no separate clamp storage needed; cables are built into the unit for faster deployment on busy worksites Dual output voltage (12V and 24V) — covers the full range of 12V and 24V petrol and diesel vehicles from passenger cars to large trucks and machinery 4x USB-A + USB-C output/input + dual 12V DC aux ports — charges phones, tablets, and other devices while on-site; comprehensive utility in a single unit LED display monitoring — shows power level, output voltage, and real-time current draw so operators know exactly what the unit is doing at any moment Multi-mode LED flashlight (solid/SOS/strobe) — useful for engine bays, dark worksites, and emergency situations AC wall charger included — recharges from any 120–240V mains outlet in approximately 8 hours; accepts 18VDC 2A via 5.5mm input or USB-C Technical Specs Specification Detail Battery type Lithium-ion Cobalt Battery capacity 80,000mAh / 296Wh Starting current 12V: 3,000A / 24V: 2,000A Peak current 12V: 15,000A / 24V: 6,000A Output voltage 12–16V DC and 24–32V DC Output ports Integrated jumper cables; 4x USB-A 5V 2.1A (QC3.0); 2x 12V DC aux 10A; 1x 12V 5.5mm 3.5A; 1x USB-C Input charging ports 5.5mm 18VDC 2A; USB-C AC recharging 18VDC via 120–240V AC wall charger (~8 hours) Estimated lifetime starts Up to 5,000 Storage temperature -20°C to +80°C Operating temperature Not specified Dimensions 356mm (L) x 128mm (W) x 418mm (H) Warranty 1 year Compatible With / Goes Well With 12V petrol and diesel vehicles (passenger cars, utes, 4WDs, light commercial) 24V diesel vehicles (semi-trucks, buses, heavy plant, agricultural and mining machinery) Most 12V and 24V engines including heavy machinery and transport equipment (per manufacturer specification) USB and USB-C chargeable devices via multi-port output On-site power applications requiring 12V DC auxiliary output Weight 8.35kg (unit weight) / 10.23kg (shipping weight including packaging) Frequently Asked Questions Can the HU6514 start both 12V and 24V vehicles? Yes — it delivers 15,000A peak on 12V systems and 6,000A peak on 24V systems, covering both light vehicles and heavy commercial equipment like semi-trucks and buses. How many jump starts can I expect over its lifetime? The HU6514 is rated for up to 5,000 estimated lifetime jump starts, making it suitable for fleet operators and plant managers with ongoing heavy-duty starting requirements. Are the jumper cables built in or separate? The jumper cables are integrated into the unit — no separate clamp storage or assembly required, which speeds up deployment in worksite and emergency situations. How is the unit recharged? It recharges via an included 120–240V AC wall charger in approximately 8 hours, or via the 5.5mm 18VDC 2A input or USB-C port for alternative charging sources. What USB and power outputs does the HU6514 have? It features four USB-A ports (5V 2.1A, QC3.0), one USB-C port, two 12V DC auxiliary ports (10A), and one 12V 5.5mm port (3.5A) for broad device charging capability.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-Duty 2,000 Amp Jump Starter Built for the Biggest Engines on Australian Roads Product Overview The Hulk 4x4 HU6511 is a high-capacity lithium-ion jump starter designed to handle serious engine sizes petrol up to 10.0L and diesel up to 7.0L making it one of the most capable portable jump starters for 4WDs, heavy utes, trucks, and large-displacement vehicles. Its 18,000mAh battery delivers a 2,000A peak current and 1,200A starting current, with enough reserve to power devices and charge laptops and phones between uses. Beyond starting your vehicle, the HU6511 functions as a multi-output portable power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and a 240V AC charger included in the kit. The unit also features a multi-mode LED flashlight with solid, SOS, and strobe functions, and ships in an EVA protective carry case with everything needed to charge, clamp, and get moving. Features & Benefits 2,000A peak / 1,200A starting current — rated to start petrol engines up to 10.0L and diesel engines up to 7.0L, covering the biggest rigs, 4WDs, and commercial vehicles you're likely to encounter on Australian roads Spark-proof, reverse polarity clamps — safer connection under the bonnet, especially in low light or awkward engine bays Multi-voltage DC output (12V / 16V / 19V) — powers or charges laptops and other DC devices in the field without needing mains power 240V AC charger, car charger adaptor, and 4-in-1 USB cable included — covers nearly every charging scenario from home to remote Laptop adaptor harness included — makes this a genuinely useful touring and work tool beyond jump-starting Multi-function LED display — shows charge level and current levels at a glance before attempting a start Multi-mode LED flashlight (solid/SOS/strobe) — useful for roadside breakdowns, camp use, or emergencies Black and grey rubberised housing — built for rough storage in ute trays, toolboxes, and under seats EVA protective carry case — keeps the unit, clamps, and cables organised and protected Technical Specs Specification Detail Battery type Lithium-ion Battery capacity 18,000mAh Starting current 1,200A Peak current 2,000A Charging time 5–6 hours Input 18V 1.5A (USB) USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets 12V 4A and 19V 3.5A Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 193mm (L) x 116mm (W) x 40mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 7.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB and USB-C chargeable devices (phones, tablets, cameras) 4WD, truck, and touring setups requiring high-current emergency starting capability Weight 2.22kg (shipping weight including packaging) Frequently Asked Questions Will this start a large diesel 4WD or truck? Yes — it's rated for diesel engines up to 7.0L and petrol up to 10.0L, making it suitable for most heavy 4WDs, utes, and light commercial vehicles. Can I charge my laptop with this unit? Yes, it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), covering most laptop charging requirements without needing mains power. What charging accessories are included? The kit includes a 240V AC charger, a car charger adaptor, a 4-in-1 USB charging cable, spark-proof clamps, and an EVA protective carry case. How long does the unit take to fully charge? Expect 5–6 hours from flat to full charge using the included 240V AC charger or car charger adaptor. Is the HU6511 safe to use if I connect the clamps incorrectly? Yes — the clamps are spark-proof with reverse polarity protection, and the unit includes short circuit, over-discharge, and overheat protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 501-DG-BLK Rear Differential E-Locker Guard Black Powder Coat Suits Mazda BT-50 2021+, Isuzu DMAX 2021+ and Isuzu MUX 2022+ A black powder coated 2mm steel rear differential E-Locker protection guard designed for the Mazda BT-50 2021+, Isuzu DMAX 2021+, and Isuzu MUX 2022+, bolting on using factory M10 bolts in approximately five minutes for full front, side, and underneath differential coverage. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 501-DG-BLK is a rear differential E-Locker protection guard engineered specifically for the Mazda BT-50 2021+, Isuzu DMAX 2021+, and Isuzu MUX 2022+. Protecting the rear diff E-Locker from off-road damage can save thousands in parts and repairs, and prevent lengthy dealer wait times on non-stock parts. The guard is designed to slip over the differential and bolt directly into place using the existing factory M10 bolts, requiring no drilling and taking approximately five minutes to install. The 2mm steel construction with welded design significantly increases rigidity, and the guard provides full coverage across the front, sides, and underneath of the differential. The Mazda BT-50 variant also features two cage nut holes for a Stage 2 wire protection upgrade. The wire protection plate is available separately and mounts to this diff guard. See our listing for the Stage 2 wire protection plate add-on. Also available in stainless steel finish. Proudly made in Australia by GMF4x4. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The 2mm steel welded construction provides a rigid, heavy-duty guard that fully covers the front, sides, and underside of the rear differential E-Locker, protecting it from rocks, debris, and off-road impacts that could cause costly damage requiring dealer repair and long parts wait times. The slip-on design uses factory M10 bolts for a secure, vehicle-specific fit with no drilling into the vehicle. Installation takes approximately five minutes. The black powder coat finish delivers durable corrosion and chip resistance for long-term performance in harsh off-road and outdoor environments. For Mazda BT-50 fitments, two cage nut holes are included for a Stage 2 wire protection upgrade. The wire protection plate is sold separately and bolts directly to this diff guard for added electrical harness protection. Technical Specs Specification Detail SKU 501-DG-BLK Brand GMF4x4 Colour Black Powder Coat Compatible Vehicles Mazda BT-50 2021+ / Isuzu DMAX 2021+ / Isuzu MUX 2022+ Material 2mm Steel Construction Welded Coverage Front, Side and Underneath Differential Mounting Method Factory M10 Bolts Drilling Required No Installation Time Approx. 5 minutes Stage 2 Upgrade Cage nut holes included (BT-50 variant) for wire protection plate add-on Also Available Stainless Steel finish Origin Made in Australia Compatible With Mazda BT-50 2021+ Isuzu DMAX 2021+ Isuzu MUX 2022+ Frequently Asked Questions Does this guard require drilling into the vehicle? No. The 501-DG-BLK slips over the differential and bolts directly into place using the existing factory M10 bolts. No drilling or modification to the vehicle is required. What does the Stage 2 wire protection upgrade involve? The Mazda BT-50 variant of this diff guard includes two cage nut holes that allow a wire protection plate to be bolted on as a Stage 2 upgrade for added harness protection. The wire protection plate is available separately. Note that the diff guard must be installed first as the wire protection plate mounts directly to it. Is this guard available in a stainless steel finish? Yes. The DG-501 is also available in a stainless steel finish. Please check our listings for the stainless steel variant. Why is protecting the rear diff E-Locker important for off-road driving? The rear differential E-Locker is an exposed component that is vulnerable to impact from rocks and debris during off-road driving. Damage to the E-Locker unit or its wiring can be expensive to repair and may require extended dealer wait times for parts. The 501-DG-BLK provides full front, side, and underside coverage to prevent this damage before it occurs. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 502-DG-BLK Rear Differential Wire Protection Plate Black Stage 2 Add-On Suits Isuzu DMAX 2021+ and Mazda BT-50 2021+ A black powder coated Stage 2 wire protection plate that bolts to the GMF4x4 DG-501 rear diff E-Locker guard on the Isuzu DMAX 2021+ and Mazda BT-50 2021+, hooking over the top to fully cover and protect the differential wiring for maximum off-road peace of mind. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 502-DG-BLK is a Stage 2 add-on wire protection plate designed to complement the GMF4x4 DG-501 rear diff E-Locker guard on the Isuzu DMAX 2021+ and Mazda BT-50 2021+. The plate bolts directly to the DG-501 diff guard and hooks over the top, covering the differential wiring for complete protection against off-road damage. Please note the GMF4x4 DG-501 E-Locker guard must be installed first, as the 502-DG-BLK mounts directly to it. The DG-501 guard is available separately. See our listing for the DG-501 E-Locker guard. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The wire protection plate hooks over the top of the DG-501 diff guard and covers the rear differential wiring, providing a second layer of protection beyond the diff guard itself. Exposed wiring on the rear differential E-Locker is vulnerable to snagging, impact, and abrasion from rocks and debris off-road, and damage to this wiring can result in costly repairs and extended wait times for parts. The 502-DG-BLK eliminates this risk by fully enclosing the wiring within the guard assembly. The black powder coat finish delivers durable corrosion and chip resistance for long-term performance in harsh off-road and outdoor environments. Proudly made in Australia by GMF4x4. Technical Specs Specification Detail SKU 502-DG-BLK Brand GMF4x4 Colour Black Powder Coat Compatible Vehicles Isuzu DMAX 2021+ / Mazda BT-50 2021+ Type Stage 2 Add-On Wire Protection Plate Mounts To GMF4x4 DG-501 E-Locker Guard (required, sold separately) Origin Made in Australia Compatible With Isuzu DMAX 2021+ Mazda BT-50 2021+ Requires GMF4x4 DG-501 E-Locker Guard to be installed first. Frequently Asked Questions Do I need the DG-501 diff guard to use this wire plate? Yes. The 502-DG-BLK bolts directly to the GMF4x4 DG-501 rear diff E-Locker guard and cannot be installed without it. The DG-501 must be installed first. See our listing for the DG-501 E-Locker guard. What does the wire protection plate actually protect? The plate hooks over the top of the DG-501 guard to cover and protect the rear differential E-Locker wiring from rocks, debris, snagging, and impact during off-road driving. Damage to this wiring can be costly to repair and may result in long dealer wait times for non-stock parts. Is this plate available in a stainless steel finish? Please check with us for stainless steel finish availability for the DG-502 wire protection plate. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally. Does this plate fit the Isuzu MUX? The 502-DG-BLK is confirmed for the Isuzu DMAX 2021+ and Mazda BT-50 2021+. Please check with us for Isuzu MUX compatibility before purchasing.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 SG-2004 Ford Ranger Raptor 2022+ Rear Shock Protection Guard Pair A heavy-duty 5mm textured black steel rear shock protection guard pair designed specifically for the Ford Ranger Raptor 2022+, bolting directly to the factory mounting points for full front, side, and underneath shock coverage in approximately 5 minutes. Proudly made in Australia by GMF4x4. Please note: This guard is designed for the Ford Ranger Raptor ONLY. It is not compatible with other Ranger variants. Product Overview The GMF4x4 SG-2004 is a pair of rear shock protection guards engineered specifically for the Ford Ranger Raptor 2022+. Protecting the rear shocks from off-road damage can save thousands in parts and repairs, and prevent extended dealer wait times on non-stock components. The guards are designed to slip over and bolt directly into place using the factory mounting points, requiring no drilling and taking approximately 5 minutes to install. The 5mm textured black steel construction with welded design significantly increases rigidity, and each guard provides full coverage across the front, sides, and underneath of the rear shock. The pack includes a pair of guards covering both sides of the vehicle. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The 5mm textured black steel welded construction provides a rigid, heavy-duty guard that fully covers the front, sides, and underside of each rear shock, protecting against rocks, debris, and off-road impacts that could cause costly damage requiring dealer repair and long parts wait times. The slip-on design uses factory mounting points for a secure, vehicle-specific fit with no drilling into the vehicle. Installation takes approximately 5 minutes. The textured black steel finish provides a durable, corrosion and chip-resistant surface suited to harsh off-road and outdoor environments. Technical Specs Specification Detail SKU SG-2004 Brand GMF4x4 Compatible Vehicle Ford Ranger Raptor 2022+ ONLY Pack Contents 1 Pair (2 Guards) Material 5mm Textured Black Steel Construction Welded Coverage Front, Side and Underneath Shock Mounting Method Factory Mounting Points Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Ranger Raptor 2022+ (ONLY) Not compatible with other Ford Ranger variants. Frequently Asked Questions Does this guard fit standard Ford Ranger models other than the Raptor? No. The SG-2004 is designed exclusively for the Ford Ranger Raptor 2022+. It is not compatible with other Ranger variants. Please check with us if you are unsure of your specific model before purchasing. Does installation require drilling into the vehicle? No. The SG-2004 slips over and bolts directly to the factory mounting points using the existing hardware. No drilling or modification to the vehicle is required. How many guards are included? The SG-2004 is sold as a pair. Two guards are included, covering both rear shocks on the vehicle. Why is protecting the rear shocks important for off-road driving? The rear shocks on the Ford Ranger Raptor are exposed to rocks, debris, and impact during off-road driving. Damage to the shock absorbers or their mounting hardware can be expensive to repair and may result in extended wait times for non-stock parts at the Ford dealer. The SG-2004 provides full front, side, and underside coverage to prevent this damage before it occurs. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 CV-2006 Ford Ranger 2022+ Steering Arm Guard A purpose-built steering arm guard for the Ford Ranger 2022+, bolting directly to the factory mounting points to protect the steering boot and assembly from off-road damage and avoid costly dealer wait times. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 CV-2006 is a steering arm guard engineered specifically for the Ford Ranger 2022+. The guard bolts directly to the factory mounting points using the existing hardware, requiring no drilling and taking approximately 5 minutes to install. By protecting the steering boot and steering assembly from rocks and debris during off-road driving, the CV-2006 helps avoid damage that can put the vehicle off the road while waiting on replacement parts. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The CV-2006 bolts directly to the factory mounting points for a secure, vehicle-specific fit with no drilling into the vehicle. Protecting the steering boot and assembly from off-road impact prevents damage to a critical steering component that can be costly to repair and may require extended dealer wait times for non-stock parts. Installation takes approximately 5 minutes. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Technical Specs Specification Detail SKU CV-2006 Brand GMF4x4 Compatible Vehicle Ford Ranger 2022+ Guard Type Steering Arm Guard Mounting Method Factory Mounting Points Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Ranger 2022+ Frequently Asked Questions Does installation require drilling into the vehicle? No. The CV-2006 bolts directly to the factory mounting points using the existing hardware. No drilling or modification to the vehicle is required. Why is protecting the steering arm and boot important for off-road driving? The steering boot and steering assembly are exposed components vulnerable to rocks, debris, and impact during off-road driving. Damage to the steering boot can allow dirt and moisture into the steering assembly, leading to premature wear or failure that may require dealer repair and extended wait times for non-stock replacement parts. What material is this guard made from? Your product data does not specify the material for this guard. Please contact us for material details before purchasing. Is this guard compatible with the Ford Ranger Raptor? Your product data specifies the Ford Ranger 2022+ but does not confirm or exclude the Raptor variant. Please check with us to confirm compatibility with your specific Ranger model before purchasing. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 DG-2007 BLK Ford Raptor Next Gen and RA Rear Differential E-Locker Guard Black A heavy-duty 3mm textured black steel rear differential E-Locker protection guard designed specifically for the Ford Raptor Next Gen and RA, bolting directly to the factory fasteners for full front, side, and underneath differential coverage in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 DG-2007 BLK is a rear differential E-Locker protection guard engineered specifically for the Ford Raptor Next Gen and RA. Protecting the rear diff E-Locker from off-road damage can save thousands in parts and repairs, and prevent extended dealer wait times on non-stock components. The guard is designed to slip over the differential and bolt directly into place using the existing factory fasteners, requiring no drilling and taking approximately 5 minutes to install. The 3mm textured black steel construction with welded design significantly increases rigidity, and the guard provides full coverage across the front, sides, and underneath of the differential. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The 3mm textured black steel welded construction provides a rigid, heavy-duty guard that fully covers the front, sides, and underside of the rear differential E-Locker, protecting against rocks, debris, and off-road impacts that could cause costly damage requiring dealer repair and long parts wait times. The slip-on design uses factory fasteners for a secure, vehicle-specific fit with no drilling into the vehicle. Installation takes approximately 5 minutes. The textured black steel finish provides a durable, corrosion and chip-resistant surface suited to harsh off-road and outdoor environments. Technical Specs Specification Detail SKU DG-2007 BLK Brand GMF4x4 Compatible Vehicle Ford Raptor Next Gen / Ford Raptor RA Colour Black Material 3mm Textured Black Steel Construction Welded Coverage Front, Side and Underneath Differential Mounting Method Factory Fasteners Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Raptor Next Gen Ford Raptor RA Frequently Asked Questions Does installation require drilling into the vehicle? No. The DG-2007 BLK slips over the differential and bolts directly to the factory fasteners using the existing hardware. No drilling or modification to the vehicle is required. Why is protecting the rear diff E-Locker important for off-road driving? The rear differential E-Locker is an exposed component vulnerable to impact from rocks and debris during off-road driving. Damage to the E-Locker unit or its wiring can be expensive to repair and may require extended dealer wait times for non-stock parts. The DG-2007 BLK provides full front, side, and underside coverage to prevent this damage before it occurs. Is this guard compatible with the standard Ford Ranger (non-Raptor)? The DG-2007 BLK is designed specifically for the Ford Raptor Next Gen and RA. Compatibility with other Ranger variants is not confirmed. Please check with us if you have a non-Raptor model before purchasing. Is a stainless steel version available? Please check with us for stainless steel finish availability for the DG-2007 guard. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less