9-Inch Trapezoid Head Unit Fascia Mazda BT-50 UR Series 2015–2019. For Models with Factory 7-Inch Navigation WITHOUT 4.3-Inch Upper Display. Fascia Panel Only. Product Overview The Stinger SF9-MZ02 is a vehicle-specific 9-inch trapezoid head unit fascia designed for the Mazda BT-50 UR Series (2015–2019) equipped with a factory 7-inch navigation head unit and without a 4.3-inch multi-information display screen above the head unit area. Key Specifications Part number: SF9-MZ02 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid only Finish: Mazda factory colour match with textured grain Vehicle: Mazda BT-50 UR Series 2015–2019 Platform: Ford Ranger-based — Mazda-specific dashboard Factory equipment required: 7-inch navigation WITHOUT 4.3-inch upper display Not compatible with: BT-50 with 4.3-inch upper display / RG04 BT-50 2020–2023 (SF9-MZ03) Confirmed compatible head units: Alpine INE-AW4095, Alpine INE-AX809, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC interface: Not included — sold separately Camera retention harness: Not included — sold separately (required) Features & Benefits 7-Inch Nav Without Upper Display — Physical Dashboard Inspection Required The SF9-MZ02 requires visual confirmation that the factory dashboard does not have a 4.3-inch display screen above the head unit area. Inspect the dashboard — if there is no small rectangular screen above the factory head unit, this fascia is compatible. If a small display is present above the head unit, a different fascia solution is needed. Ford Ranger Platform — But Mazda-Specific Dashboard The BT-50 UR Series shares the Ford Ranger platform but has a distinct Mazda dashboard design, interior trim, and control layout. Ford Ranger fascias will not fit the BT-50. The SF9-MZ02 is engineered exclusively for the Mazda BT-50 UR dashboard. Factory Navigation CAN-Bus Integration Note Factory navigation-equipped BT-50 models integrate vehicle settings, trip computer, and climate status through the factory head unit screen. After replacing the head unit, some of these functions may require CAN-bus integration modules for continued access. Physical controls (climate, cruise) remain operational; consult a professional installer for full feature compatibility. Camera Retention Harness Required All 2015+ BT-50 UR models are equipped with a factory reverse camera. A camera retention harness is required to maintain this functionality. Different from SF9-MZ03 The SF9-MZ02 covers the UR Series (2015–2019, Ford Ranger platform). The SF9-MZ03 covers the 3rd-generation RG04 (2020–2023, Isuzu platform). These are completely different vehicles with different dashboards. Technical Specs Specification Detail Brand Stinger Part Number SF9-MZ02 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Only Finish Mazda Factory Colour Match, Textured Grain Vehicle Mazda BT-50 UR Series 2015–2019 Platform Ford Ranger-based — Mazda-specific dashboard Factory Equipment 7-Inch Navigation WITHOUT 4.3-Inch Upper Display Not Compatible BT-50 with 4.3-inch upper display / RG04 BT-50 2020–2023 (SF9-MZ03) Confirmed Head Units Alpine INE-AW4095, INE-AX809; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; Aerpro AM9X Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Interface Not included Camera Retention Harness Not included — required Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Factory Equipment Mazda BT-50 UR Series 2015–2019 7-inch nav, no 4.3-inch upper display Not compatible with: Mazda BT-50 UR Series models with 4.3-inch upper display screen Mazda BT-50 RG04 Series 2020–2023 (requires SF9-MZ03) Ford Ranger (different dashboard despite shared platform) Confirmed compatible 9-inch trapezoid head units: Alpine INE-AW4095 Alpine INE-AX809 Kenwood DMX80AXS Pioneer DMH-AP6650BT Aerpro AM9X Required accessories (sold separately): Mazda BT-50 UR-specific wiring harness (Mazda-to-ISO) Antenna adaptor (Mazda proprietary to standard) Steering wheel control interface Reverse camera retention harness (required — all 2015+ models) CAN-bus integration module (may be required for vehicle settings display) Frequently Asked Questions How do I confirm my BT-50 is compatible with the SF9-MZ02? Inspect the dashboard. If your BT-50 has a factory 7-inch navigation system with no small display screen above the head unit, the SF9-MZ02 is compatible. If a 4.3-inch screen is present above the head unit showing trip computer or vehicle information, a different fascia is required. If unsure, photograph the dashboard and confirm with Stinger or F.A.E. before purchasing. What is the difference between the SF9-MZ02 and SF9-MZ03? The SF9-MZ02 covers the BT-50 UR Series (2015–2019) built on the Ford Ranger platform. The SF9-MZ03 covers the 3rd-generation BT-50 RG04 (2020–2023) built on the Isuzu platform. These are different vehicles with completely different dashboards — verify your BT-50 model year before purchasing. Does the SF9-MZ02 include wiring harnesses or installation accessories? No — the SF9-MZ02 is a fascia panel only. A Mazda BT-50 UR-specific wiring harness, antenna adaptor, SWC interface, and reverse camera retention harness are all required separately. Factory navigation models may also require a CAN-bus integration module. Will factory BT-50 functions be maintained after installation? Physical climate controls and steering wheel buttons remain operational. Factory camera retains function through the retention harness. Some factory screen functions (vehicle settings, trip computer) may require CAN-bus integration for continued display through the aftermarket head unit — consult a professional installer for complete feature compatibility assessment. Is professional installation recommended for the SF9-MZ02? Yes — the BT-50 UR dashboard with factory navigation is a complex installation involving CAN-bus integration, factory navigation removal, and multiple retention harnesses. Professional installation by a qualified car audio installer is strongly recommended. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

9-Inch Trapezoid Head Unit Fascia Mazda BT-50 RG04 Series (3rd Generation) 2020–2023. OEM Mazda Finish. Fascia Panel Only. Not Compatible with Previous BT-50 or Isuzu D-MAX/MU-X. Product Overview The Stinger SF9-MZ03 is a vehicle-specific 9-inch trapezoid head unit fascia designed exclusively for the Mazda BT-50 RG04 Series (3rd generation, 2020–2023). Although the RG04 BT-50 shares its mechanical platform with the Isuzu D-MAX and MU-X, the BT-50 features a completely distinct Mazda-designed dashboard with brand-specific styling, trim materials, and interior aesthetics the SF9-MZ03 is dedicated to this Mazda-specific dashboard and is not compatible with Isuzu D-MAX or MU-X models, which use the SF9-IZ02. Key Specifications Part number: SF9-MZ03 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid only Finish: Mazda factory colour match with textured grain Vehicle: Mazda BT-50 RG04 Series (3rd generation) 2020–2023 Platform: Isuzu-based — Mazda-specific dashboard Confirmed compatible head units: Alpine INE-AW4095, Alpine INE-AX809, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X Not compatible with: BT-50 UR Series 2015–2019 (SF9-MZ02) / Isuzu D-MAX / Isuzu MU-X (SF9-IZ02) Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC interface: Not included — sold separately Camera retention harness: Not included — sold separately Features & Benefits Exclusive RG04 BT-50 Fitment — Not Isuzu Compatible Although the BT-50 RG04 shares its mechanical underpinnings with the Isuzu D-MAX/MU-X, the Mazda dashboard is a completely independent design. The SF9-MZ03 is precision-moulded for the Mazda-specific dashboard layout, trim alignment, and brand finish — it will not fit the Isuzu dashboard. Third-Generation BT-50 Only — Not for UR Series The RG04 (2020–2023) and the previous UR Series (2015–2019) are completely different platforms with different dashboard architectures. The SF9-MZ02 covers the UR Series. Confirm the build year before purchasing. Mazda Factory Finish — Textured Grain Moulded to match the BT-50 RG04 factory dashboard finish including texture and grain pattern — integrating the head unit as a factory-matched dashboard component. Camera Retention Harness Required All 2020+ BT-50 RG04 models are equipped with a factory reverse camera. A camera retention harness must be purchased separately to maintain reverse camera functionality with the aftermarket head unit. CAN-Bus Integration Note Some BT-50 RG04 functions previously accessible through the factory screen (vehicle settings, trip computer) may require CAN-bus integration for continued access through the aftermarket head unit. Consult a professional installer for full feature compatibility specific to the vehicle's configuration. Technical Specs Specification Detail Brand Stinger Part Number SF9-MZ03 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Finish Mazda Factory Colour Match, Textured Grain Vehicle Mazda BT-50 RG04 Series (3rd Gen) 2020–2023 Platform Isuzu-based — Mazda-specific dashboard Not Compatible BT-50 UR 2015–2019 (SF9-MZ02) / Isuzu D-MAX / Isuzu MU-X (SF9-IZ02) Confirmed Head Units Alpine INE-AW4095, INE-AX809; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; Aerpro AM9X Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Interface Not included Camera Retention Harness Not included — required (all RG04 have reverse camera) Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Series Mazda BT-50 2020–2023 RG04 Series (3rd Generation) Not compatible with: Mazda BT-50 UR Series 2015–2019 — requires SF9-MZ02 Isuzu D-MAX 2019–2023 — requires SF9-IZ02 Isuzu MU-X 2019–2023 — requires SF9-IZ02 Confirmed compatible 9-inch trapezoid head units: Alpine INE-AW4095 Alpine INE-AX809 Kenwood DMX80AXS Pioneer DMH-AP6650BT Aerpro AM9X Required accessories (sold separately): Mazda BT-50 RG04 wiring harness (Mazda-to-ISO) Antenna adaptor (Mazda proprietary to standard) Steering wheel control interface Reverse camera retention harness (required — all RG04 models have factory camera) Frequently Asked Questions Is the SF9-MZ03 compatible with Isuzu D-MAX or MU-X models? No — despite sharing the same mechanical platform, the Mazda BT-50 RG04 and the Isuzu D-MAX/MU-X have completely different dashboard designs. The SF9-MZ03 is for the Mazda BT-50 RG04 only. Isuzu D-MAX and MU-X require the SF9-IZ02. What is the difference between the SF9-MZ02 and SF9-MZ03? The SF9-MZ02 is for the previous-generation BT-50 UR Series (2015–2019) built on the Ford Ranger platform. The SF9-MZ03 is for the current third-generation BT-50 RG04 Series (2020–2023) built on the Isuzu platform. The two generations have entirely different dashboard architectures and are not interchangeable. Does the SF9-MZ03 include a wiring harness or steering wheel control interface? No — the SF9-MZ03 is a fascia panel only. A Mazda BT-50 RG04-specific wiring harness, antenna adaptor, steering wheel control interface, and reverse camera retention harness are all required separately for a complete installation. Do all 2020–2023 Mazda BT-50 models have a factory reverse camera? Yes — all third-generation RG04 BT-50 models are equipped with a factory reverse camera. A camera retention harness is required to maintain reverse camera functionality after installing an aftermarket head unit. Is professional installation recommended for the SF9-MZ03? Yes — the BT-50 RG04 dashboard involves Mazda-specific disassembly procedures, multiple factory integration harnesses, steering wheel control programming, and camera retention. Professional installation by a qualified car audio installer is strongly recommended. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

9-Inch Trapezoid Head Unit Fascia Mazda 3 2010–2013, Sedan and Hatchback. OEM-Style Integration. Fascia Panel Only. Not Compatible with 2014+ or 10-Inch Head Units. Product Overview The Stinger SF9-MZ04 is a vehicle-specific 9-inch trapezoid head unit fascia designed for Mazda 3 models manufactured between 2010 and 2013 covering both sedan and hatchback body styles. Precision-moulded to match the Mazda 3 factory dashboard contours, the SF9-MZ04 delivers a clean, OEM-style appearance after installation. Compatible with 9-inch trapezoid head units from Alpine, Pioneer, Kenwood, and other major manufacturers. Not compatible with earlier BK-series or the 2014 and newer BM/BN-series Mazda 3. Key Specifications Part number: SF9-MZ04 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid only (not 10-inch) Colour: Not specified — confirm with Stinger Vehicle: Mazda 3 2010–2013 (sedan and hatchback) Not compatible with: Mazda 3 BK series (pre-2010) / Mazda 3 BM/BN series (2014+) / 10-inch head units Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC harness: Not included — sold separately Camera retention harness: Not included — sold separately Features & Benefits Covers Sedan and Hatchback — 2010 to 2013 A single fascia solution covers both body styles of the Mazda 3 from 2010 to 2013. Not compatible with earlier BK-series or the updated BM/BN-series (2014+), which have different dashboard configurations. BOSE Audio Note Some Mazda 3 models in this production period were fitted with a factory BOSE audio system. These models require an additional amplifier retention harness (sold separately) to maintain full audio system function after installing an aftermarket head unit. 9-Inch Trapezoid Only — Not Compatible with 10-Inch The SF9-MZ04 is designed for 9-inch trapezoid head units only. 10-inch trapezoid head units require a different fascia panel. OEM-Style Dashboard Integration Precision moulding maintains the Mazda 3 factory interior aesthetic — a cohesive, professional appearance with no visible gaps after installation. Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing installers to source the correct harness and accessories for the vehicle's specific equipment level. Technical Specs Specification Detail Brand Stinger Part Number SF9-MZ04 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid (not 10-inch) Colour Not specified — confirm with Stinger Vehicle Mazda 3 2010–2013 (sedan and hatchback) Not Compatible Mazda 3 BK pre-2010 / BM/BN 2014+ / 10-inch head units BOSE Audio Amplifier retention harness required if equipped Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Harness Not included Camera Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Body Styles Mazda Mazda 3 2010–2013 Sedan and Hatchback Not compatible with: Mazda 3 BK series (pre-2010) Mazda 3 BM/BN series 2014 and newer 10-inch trapezoid head units Compatible 9-inch trapezoid head units (confirm format before purchasing): Alpine INE-AW409S / INE-AX809 and iLX series Pioneer DMH series Kenwood DMX series Sony, JVC, and other 9-inch trapezoid format models Recommended accessories (sold separately): Mazda 3 2010–2013 specific ISO wiring harness Steering wheel control harness (if equipped) Amplifier retention harness (if equipped with factory BOSE audio) Camera retention harness (if equipped with reverse camera) Antenna adaptor for Mazda Frequently Asked Questions Does the SF9-MZ04 include wiring harnesses or installation accessories? No — the SF9-MZ04 is a fascia panel only. Wiring harnesses, antenna adaptors, SWC harnesses, and camera retention harnesses are all sold separately. Mazda 3 models with factory BOSE audio also require an amplifier retention harness. Will this work with a 2014 or newer Mazda 3? No — the SF9-MZ04 is for Mazda 3 models from 2010 to 2013 only. The 2014 and newer BM/BN-series Mazda 3 has a completely different dashboard configuration and requires a different fascia solution. Does this fascia fit both the sedan and hatchback Mazda 3? Yes — the SF9-MZ04 covers both the sedan and hatchback body styles of the Mazda 3 from 2010 to 2013. Both share the same dashboard configuration during this production period. My Mazda 3 has factory BOSE audio. What do I need? Mazda 3 models with factory BOSE audio require an amplifier retention harness (sold separately) in addition to the standard ISO wiring harness and antenna adaptor. Without this harness, the factory BOSE amplifier will not function correctly after the head unit is replaced. Can I use a 10-inch trapezoid head unit with the SF9-MZ04? No — the SF9-MZ04 is designed for 9-inch trapezoid head units only. 10-inch trapezoid head units require a different, larger fascia panel. Confirm your head unit is 9-inch trapezoid format before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-MZ05 9" Trapezoid Fascia Mazda 3 2004-2009 A vehicle-specific 9" trapezoid fascia for the Mazda 3 (2004-2009), the SF9-MZ05 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting hardware must be sourced separately. Product Overview The Stinger SF9-MZ05 is a 9" trapezoid fascia designed specifically for the Mazda 3 from 2004-2009. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Mazda 3 dashboard opening. The fascia is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Mazda 3 2004-2009 Specific Fitment: The SF9-MZ05 is designed specifically for the Mazda 3 from 2004-2009, providing a precise dashboard fit for 9" trapezoid head unit installations in this model. 9" Trapezoid Head Unit Aperture: The SF9-MZ05 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-MZ05 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia Only: The SF9-MZ05 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-MZ05 Brand Stinger Compatible Vehicles Mazda 3 2004-2009 Application 9" Trapezoid Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-MZ05 is designed for the Mazda 3 from 2004-2009 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm your specific Mazda 3 variant and build date before purchase. Frequently Asked Questions Is the SF9-MZ05 compatible with standard Double DIN head units? No. The SF9-MZ05 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-MZ05 include mounting brackets or wiring harnesses? No. The SF9-MZ05 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-MZ05? The SF9-MZ05 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Is the SF9-MZ05 compatible with all Mazda 3 variants from 2004-2009? The SF9-MZ05 is confirmed for the Mazda 3 from 2004-2009. Confirm your specific variant and build date before purchase. What additional components are needed for a complete installation with the SF9-MZ05? The SF9-MZ05 is a fascia panel only. A wiring harness, steering wheel control interface, antenna adaptor, and mounting hardware will also be required for a complete head unit installation. Use the Stinger and Aerpro vehicle fitment guides to confirm the correct additional components for your specific Mazda 3 before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Silver 9-Inch Trapezoid Head Unit Fascia Nissan Patrol GU Y61 2005–2016. OEM-Style Dashboard Integration. Fascia Panel Only. Not Compatible with Patrol Y62 (Different Vehicle). Product Overview The Stinger SF9-NI02 is a vehicle-specific silver 9-inch trapezoid head unit fascia designed for the Nissan Patrol GU (Y61 series) from 2005 to 2016. Purpose-built for the Patrol GU dashboard, the SF9-NI02 accommodates universal 9-inch trapezoid head units from Alpine, Kenwood, Pioneer, and Aerpro while maintaining the Patrol GU's factory dashboard appearance with a silver finish that complements factory silver and grey interior trim accents. The UV-resistant silver powder-coated finish is confirmed one of only a small number of colour-confirmed fascias in the Stinger range. The Patrol GU is one of Australia's most enduring 4WD platforms, and the SF9-NI02 is engineered to withstand the demanding operating conditions corrugated outback roads, high UV exposure, and extreme temperature cycling that Patrol owners regularly encounter. Wiring harness, antenna adaptor, steering wheel control interface, and camera retention harness are not included and must be purchased separately. Confirm the vehicle's factory equipment (steering wheel controls, reverse camera, factory premium audio) before sourcing accessories. Note: the Patrol Y62 is an entirely different vehicle from the Patrol GU (Y61) this fascia is for the GU/Y61 only. Confirm the start year from the official Stinger SF9-NI02 product page the title states 2005 but the product's own FAQ states compatibility from 1998. Key Specifications Part number: SF9-NI02 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid Finish: Silver (UV-resistant powder coat) Vehicle: Nissan Patrol GU Y61 2005–2016 (confirm if extends to 1998) Not compatible with: Nissan Patrol Y62 (different vehicle) Confirmed compatible head units: Alpine INE-AW409S, INE-AX809, INE-AW409S-10, INE-AX809-10, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X/AM10X Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC interface: Not included — sold separately Camera retention harness: Not included — sold separately Features & Benefits Silver Finish — Confirmed, UV-Resistant The silver powder-coated finish is confirmed for this model — complementing the Patrol GU factory silver and grey interior trim accents. UV-resistant coating maintains colour consistency under extended Australian sun exposure, particularly important for a vehicle used in harsh outback conditions. Patrol GU Y61 Specific Fitment Precision-moulded for the Patrol GU (Y61) factory dashboard — aligning with factory mounting points and trim lines for a professional, OEM-style result. This is not a universal fascia; it is engineered for the GU dashboard specifically. Not Compatible with Patrol Y62 The Patrol Y62 is a completely different and later-generation vehicle. The SF9-NI02 is for the Patrol GU (Y61) only — confirm the chassis code before purchasing. Reinforced for 4WD Touring Reinforced mounting points and rigid ABS construction resist the vibration encountered on corrugated roads and off-road terrain typical of Patrol GU usage, maintaining secure head unit mounting and a rattle-free installation over the vehicle's operational life. Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing installers to source the correct wiring harness, SWC interface, and accessories for the vehicle's specific equipment configuration. Technical Specs Specification Detail Brand Stinger Part Number SF9-NI02 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Finish Silver (UV-Resistant) Vehicle Nissan Patrol GU Y61 2005–2016 (confirm if extends to 1998) Not Compatible Nissan Patrol Y62 (different vehicle) Confirmed Head Units Alpine INE-AW409S, INE-AX809, INE-AW409S-10, INE-AX809-10; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; Aerpro AM9X, AM10X Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Interface Not included Camera Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Chassis Nissan Patrol GU 2005–2016 (confirm 1998 start) Y61 Series Not compatible with: Nissan Patrol Y62 (different vehicle — later generation) Confirmed compatible 9-inch trapezoid head units: Alpine INE-AW409S / INE-AX809 Alpine INE-AW409S-10 / INE-AX809-10 Kenwood DMX80AXS Pioneer DMH-AP6650BT Aerpro AM9X / AM10X Recommended accessories (sold separately): Nissan Patrol GU-specific wiring harness (Nissan-to-ISO) Antenna adaptor for Nissan Steering wheel control interface (if equipped) Camera retention harness (if equipped with reverse camera) Weight Not specified. Contact Stinger or your authorised reseller. Frequently Asked Questions Does the SF9-NI02 cover the full Patrol GU production run including pre-2005 models? The product title states 2005–2016. However, the product's own FAQ states compatibility from 1998 through 2016, which aligns with the Patrol GU (Y61) production start date. Confirm the correct year range from the official Stinger SF9-NI02 product page before purchasing a pre-2005 Patrol GU. Is the SF9-NI02 compatible with the Nissan Patrol Y62? No — the Patrol Y62 is an entirely different and later-generation vehicle from the Patrol GU (Y61). The SF9-NI02 is engineered for the Patrol GU (Y61) dashboard only. Confirm the chassis code of your vehicle before purchasing. Which 9-inch head units are confirmed compatible with the SF9-NI02? Confirmed compatible head units include Alpine INE-AW409S, INE-AX809, INE-AW409S-10, and INE-AX809-10; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; and Aerpro AM9X and AM10X. Both 9-inch and 10-inch Alpine/Aerpro variants are listed — confirm the format supported for this fascia from the official product page. Does the SF9-NI02 include wiring harnesses or installation accessories? No — the SF9-NI02 is a fascia panel only. A Patrol GU-specific wiring harness, antenna adaptor, SWC interface, and camera retention harness are all sold separately. Will the silver finish match my Patrol GU's interior? The silver finish is designed to complement Patrol GU factory silver and grey interior trim accents. Interior trim colour can vary between model years and trim levels. Compare the fascia finish against the vehicle's existing dashboard components before purchasing, or consult a professional installer for a colour assessment. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Gloss Black 9-Inch and 10-Inch Trapezoid Head Unit Fascia Nissan Navara D23 NP300 2015–2023. OEM-Style Integration. Fascia Panel Only. Product Overview The Stinger SF9-NI03 is a vehicle-specific gloss black trapezoid head unit fascia designed for the Nissan Navara D23 NP300 (2015–2023). Unlike the SF9-NI05 which is a 9-inch-only solution, the SF9-NI03 accommodates both 9-inch and 10-inch trapezoid head units providing flexibility across the two most popular large-screen aftermarket formats in a single panel with a gloss black finish. Precision-moulded to match the Navara D23 factory dashboard contours, the SF9-NI03 delivers a clean, OEM-style appearance after installation. Compatible with both 9-inch and 10-inch trapezoid head units from Alpine, Pioneer, Kenwood, and other major manufacturers. For 2024 and newer Navara models, confirm compatibility from the official product page before purchasing. Key Specifications Part number: SF9-NI03 Brand: Stinger Product type: Trapezoid head unit fascia Compatible head unit formats: 9-inch trapezoid AND 10-inch trapezoid Finish: Gloss black Vehicle: Nissan Navara D23 NP300 2015–2023 Not compatible with: Pre-2015 Navara D40 / non-trapezoid head units Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC harness: Not included — sold separately Camera retention harness: Not included — sold separately Features & Benefits Dual Size Compatibility — 9-Inch and 10-Inch Trapezoid A single gloss black fascia accommodates both 9-inch and 10-inch trapezoid head units — the same dual-size flexibility as the SF9-MI01 Lancer and SF9-MI05 Pajero Sport fascias. Buyers can select the screen size that suits the installation without requiring a different panel. Gloss Black Finish — Confirmed The gloss black finish matches the Navara D23 NP300 factory gloss black trim accents, delivering a factory-matched interior appearance after installation. D23 NP300 Coverage — 2015 to 2023 Covers the Nissan Navara D23 NP300 platform from 2015 to 2023. For 2024 and newer models, confirm compatibility before purchasing. Not compatible with the earlier D40 Navara. Around View Monitor / Camera Compatible Navara D23 NP300 models equipped with a factory reverse camera or around view monitor require a camera retention harness (sold separately) to maintain camera functionality with an aftermarket head unit. Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing installers to source the correct harness and accessories independently. Technical Specs Specification Detail Brand Stinger Part Number SF9-NI03 Product Type Trapezoid Head Unit Fascia Compatible Formats 9-Inch Trapezoid and 10-Inch Trapezoid Finish Gloss Black Vehicle Nissan Navara D23 NP300 2015–2023 Not Compatible Navara D40 pre-2015 / non-trapezoid head units Camera Systems Reverse camera and around view monitor — retention harness required Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Harness Not included Camera Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Series Nissan Navara 2015–2023 D23 NP300 Not compatible with: Nissan Navara D40 (pre-2015) Standard double DIN rectangular head units Compatible head unit formats: 9-inch trapezoid — Alpine iLX series, Pioneer DMH series, Kenwood DMX series 10-inch trapezoid — Alpine Halo series and other 10-inch trapezoid models Recommended accessories (sold separately): Nissan Navara D23 NP300-specific ISO wiring harness Steering wheel control harness Camera retention harness (reverse camera or around view monitor) Antenna adaptor for Nissan Frequently Asked Questions What is the difference between the SF9-NI03 and SF9-NI05 for the Nissan Navara? Both cover the Nissan Navara D23 NP300 platform but differ in head unit format and finish. The SF9-NI03 is gloss black and accepts both 9-inch and 10-inch trapezoid head units (2015–2023). The SF9-NI05 accepts 9-inch trapezoid head units only and covers 2015–2024. Choose based on the head unit screen size required and preferred finish. Does the SF9-NI03 fit both 9-inch and 10-inch trapezoid head units? Yes — the SF9-NI03 accommodates both 9-inch and 10-inch trapezoid head unit formats from a single gloss black fascia panel. Does the SF9-NI03 include wiring harnesses or installation accessories? No — the SF9-NI03 is a fascia panel only. A Navara D23-specific ISO harness, SWC harness, camera retention harness, and antenna adaptor are all sold separately. My Navara has a factory around view monitor. Will this fascia work? Yes — the SF9-NI03 is compatible with Navara D23 NP300 models equipped with a factory reverse camera or around view monitor. Retaining camera functionality requires a suitable camera retention interface harness (sold separately). Consult a qualified installer for the correct harness for your Navara configuration. Is this fascia compatible with 2024 or newer Navara models? The SF9-NI03 is confirmed for Nissan Navara D23 NP300 models from 2015 to 2023. Compatibility with 2024 and newer models has not been confirmed — verify from the official Stinger SF9-NI03 product page before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Gloss Black 9-Inch and 10-Inch Trapezoid Head Unit Fascia Nissan X-Trail 2014–2023. OEM-Style Integration. BOSE and Around View Monitor Compatible. Fascia Panel Only. Product Overview The Stinger SF9-NI04 is a vehicle-specific gloss black trapezoid head unit fascia designed for Nissan X-Trail models manufactured between 2014 and 2023. Precision-moulded to match the X-Trail factory dashboard contours, the SF9-NI04 delivers a clean, OEM-style appearance after installation. Both 9-inch and 10-inch trapezoid head units are accommodated in a single gloss black fascia panel. X-Trail models equipped with factory BOSE audio require an amplifier retention harness (sold separately) to maintain full audio system function. Models with factory reverse camera or around view monitor require a camera retention harness (sold separately). For 2024 and newer X-Trail models, confirm compatibility before purchasing. Key Specifications Part number: SF9-NI04 Brand: Stinger Product type: Trapezoid head unit fascia Compatible head unit formats: 9-inch trapezoid AND 10-inch trapezoid Finish: Gloss black Vehicle: Nissan X-Trail 2014–2023 Not compatible with: Pre-2014 X-Trail / non-trapezoid head units Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC harness: Not included — sold separately Camera retention harness: Not included — sold separately (required for camera-equipped models) BOSE amplifier retention harness: Not included — sold separately (required if equipped) Features & Benefits Dual Size — 9-Inch and 10-Inch Trapezoid, Gloss Black A single gloss black fascia covers both 9-inch and 10-inch trapezoid head units — matching the same dual-format approach as the SF9-NI03 Navara and SF9-MI05 Pajero Sport. Gloss Black Finish — Confirmed The gloss black finish matches the X-Trail factory gloss black interior trim accents for a factory-style appearance post-installation. BOSE Audio — Retention Harness Required Nissan X-Trail models fitted with the factory BOSE premium audio system require an amplifier retention harness (sold separately) to maintain full BOSE system function after installing an aftermarket head unit. Around View Monitor / Camera Compatible X-Trail models with factory reverse camera or around view monitor require a camera retention harness (sold separately) to retain camera functionality. 2014 to 2023 Coverage For 2024 and newer X-Trail models, confirm compatibility from the official Stinger SF9-NI04 product page before purchasing. Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing installers to source the correct accessories independently. Technical Specs Specification Detail Brand Stinger Part Number SF9-NI04 Product Type Trapezoid Head Unit Fascia Compatible Formats 9-Inch Trapezoid and 10-Inch Trapezoid Finish Gloss Black Vehicle Nissan X-Trail 2014–2023 Not Compatible Pre-2014 X-Trail / non-trapezoid head units BOSE Audio Amplifier retention harness required if equipped Camera Systems Reverse camera and around view monitor — retention harness required Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Harness Not included Camera Retention Harness Not included BOSE Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Year Range Nissan X-Trail 2014–2023 Compatible head unit formats: 9-inch trapezoid — Alpine iLX series, Pioneer DMH series, Kenwood DMX series 10-inch trapezoid — Alpine Halo series and other 10-inch trapezoid models Recommended accessories (sold separately): Nissan X-Trail 2014–2023 specific ISO wiring harness Steering wheel control harness Camera retention harness (reverse camera or around view monitor) BOSE amplifier retention harness (if equipped with factory BOSE) Antenna adaptor for Nissan Frequently Asked Questions Does the SF9-NI04 fit both 9-inch and 10-inch trapezoid head units? Yes — the SF9-NI04 accommodates both 9-inch and 10-inch trapezoid head unit formats in a single gloss black fascia panel. My X-Trail has factory BOSE audio. What do I need? Nissan X-Trail models with factory BOSE audio require an amplifier retention harness (sold separately) in addition to the standard ISO wiring harness. Without it, the BOSE amplifier will not function correctly after the head unit is replaced. Does the SF9-NI04 include wiring harnesses or installation accessories? No — the SF9-NI04 is a fascia panel only. ISO harness, SWC harness, camera retention harness, and antenna adaptor are all sold separately. BOSE-equipped models require an additional amplifier retention harness. My X-Trail has a factory around view monitor. Will I lose it? The fascia itself does not affect camera function — however, retaining the around view monitor or reverse camera with an aftermarket head unit requires a compatible camera retention interface harness (sold separately). Consult a qualified installer for the correct harness for your X-Trail configuration. Is the SF9-NI04 compatible with 2024 or newer X-Trail models? The SF9-NI04 is confirmed for Nissan X-Trail models from 2014 to 2023. Compatibility with 2024 and newer models has not been confirmed — verify from the official Stinger SF9-NI04 product page before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

9-Inch Trapezoid Head Unit Fascia Nissan Navara D23 NP300 2015–2024. Covers ST, STX, SL and 360-Degree Camera Models. OEM-Style Dashboard Integration. Fascia Panel Only. Product Overview The Stinger SF9-NI05 is a vehicle-specific 9-inch trapezoid head unit fascia designed for the Nissan Navara D23 NP300 platform across its full production run from 2015 to 2024. Coverage spans the initial NP300 launch models (2015–2019) across ST, STX, and SL trim levels including Navara variants fitted with a factory 360-degree camera system as well as the updated D23 series from 2019 through to 2024. A single fascia solution covers the majority of D23 Navara owners in the Australian market. Precision-moulded to match the Navara D23 factory dashboard contours, the SF9-NI05 delivers a clean, professional finish after installation. Compatible with 9-inch trapezoid head units from Alpine, Kenwood, Pioneer, Mongoose, and Aerpro. Key Specifications Part number: SF9-NI05 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid Colour: Not specified — confirm with Stinger Vehicle application: Nissan Navara D23 NP300 2015–2024 Trim levels covered: ST, STX, SL (2015–2019); D23 2019–2020; D23 2021–2024 360-degree camera models: Compatible (camera retention harness required, sold separately) Includes: Fascia panel only Wiring harness: Not included — sold separately Steering wheel control interface: Not included — sold separately Antenna adapter: Not included — sold separately Features & Benefits Broad Navara D23 Coverage — 2015 to 2024 The SF9-NI05 covers the full D23 NP300 platform across nine production years — ST, STX, and SL trim variants (2015–2019), the updated D23 (2019–2020), and the revised D23 series (2021–2024). A single fascia SKU covers the vast majority of Navara D23 owners in Australia without requiring model-year specific alternatives. 360-Degree Camera Models Compatible The SF9-NI05 is compatible with Navara D23 NP300 variants fitted with the factory 360-degree camera system. Retaining 360-degree camera functionality with an aftermarket head unit requires a suitable camera retention interface harness, sold separately. Consult a qualified installer for the correct harness for your specific Navara configuration. Vehicle-Specific Fitment — Navara D23 NP300 Precision-moulded for the Navara D23 dashboard, the SF9-NI05 aligns with the factory mounting points and trim lines for a professional, factory-finished result — not achievable with a universal fascia. 9-Inch Trapezoid Format — Wide Head Unit Compatibility Supports the trapezoid 9-inch format used by Alpine (INE-AW409S, INE-AX809), Kenwood (DMX80AXS), Mongoose (Q9WCA), Pioneer (DMH-AP6650BT), and Aerpro (AM9X). Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing installers to specify the appropriate wiring harness, SWC interface, and accessories independently. Technical Specs Specification Detail Brand Stinger Part Number SF9-NI05 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Colour Not specified — confirm with Stinger Vehicle Nissan Navara D23 NP300 2015–2024 Trim Levels ST, STX, SL (2015–2019); D23 2019–2020; D23 2021–2024 360-Degree Camera Compatible — retention harness required, sold separately Includes Fascia Panel Only Wiring Harness Not included Steering Wheel Control Not included Antenna Adapter Not included Camera Retention Harness Not included — required for 360-degree camera models Compatible With / Goes Well With Vehicle compatibility: Make Model Year / Series Nissan Navara 2015–2019 (D23 NP300) ST, STX, SL Nissan Navara 2015–2019 (D23 NP300) with 360-degree camera Nissan Navara 2019–2020 (D23) Nissan Navara 2021–2024 (D23) Compatible 9-inch trapezoid head units (confirm your unit's format before purchasing): Alpine INE-AW409S / INE-AX809 Kenwood DMX80AXS Mongoose Q9WCA Pioneer DMH-AP6650BT Aerpro AM9X Recommended accessories (sold separately): Aftermarket head unit harness adapter for Nissan Navara D23 NP300 Steering wheel control interface for Nissan Navara D23 NP300 Factory 360-degree camera retention harness for Nissan Navara D23 NP300 Antenna adapter for Nissan Navara D23 NP300 Frequently Asked Questions Which Nissan Navara models is the SF9-NI05 compatible with? The SF9-NI05 covers the Nissan Navara D23 NP300 from 2015 to 2024 — including ST, STX, and SL trim variants (2015–2019), models with the factory 360-degree camera system, and the updated D23 series through to 2024. Confirm your Navara's build year and chassis code before purchasing. My Navara has a factory 360-degree camera system. Can I still use this fascia? Yes — the SF9-NI05 is compatible with 360-degree camera-equipped Navara D23 NP300 models. However, retaining the 360-degree camera functionality with an aftermarket head unit requires a suitable camera retention interface harness, sold separately. Consult a professional installer for the correct harness for your configuration. Does the SF9-NI05 include a wiring harness or steering wheel control interface? No — the SF9-NI05 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adapters, and camera retention accessories are all sold separately. A vehicle-specific harness kit is recommended to retain full factory features during installation. Which 9-inch trapezoid head units are compatible with this fascia? The SF9-NI05 suits Alpine INE-AW409S and INE-AX809, Kenwood DMX80AXS, Mongoose Q9WCA, Pioneer DMH-AP6650BT, and Aerpro AM9X. Confirm your chosen head unit uses the standard 9-inch trapezoid mounting format before purchasing. Do I need professional installation for the SF9-NI05? The fascia panel fitment itself is straightforward, but the broader head unit installation involves vehicle wiring and factory feature integration. Professional installation by a qualified car audio installer is strongly recommended — particularly for Navara models with 360-degree camera systems where camera retention requires correct interface configuration. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

9-Inch Trapezoid Head Unit Fascia Subaru Forester SH and Impreza GE/GH/GR/GV 2007–2012, Including WRX and WRX STI. OEM-Style Dashboard Integration. Fascia Panel Only. Product Overview The Stinger SF9-SB01 is a vehicle-specific 9-inch trapezoid head unit fascia designed for the Subaru Forester SH-series (2007–2012) and Subaru Impreza GE, GH, GR, and GV chassis codes (2007–2012), including WRX and WRX STI performance variants built on the same platform. Both models share the same dashboard architecture across these production years a single fascia solution serves all covered variants. Precision-moulded to match the factory dashboard contours of these Subaru models, the SF9-SB01 delivers a clean, OEM-style appearance after installation. Compatible with 9-inch trapezoid head units from Alpine, Kenwood, Pioneer, Mongoose, and Aerpro. Not compatible with earlier or later Forester or Impreza generations. Key Specifications Part number: SF9-SB01 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid Colour: Not specified — confirm with Stinger Vehicle application: Subaru Forester SH 2007–2012 / Subaru Impreza GE, GH, GR, GV 2007–2012 (including WRX and WRX STI) Covers both Forester and Impreza: Yes — shared dashboard architecture Includes: Fascia panel only Wiring harness: Not included — sold separately Steering wheel control interface: Not included — sold separately Antenna adapter: Not included — sold separately Features & Benefits Covers Forester SH and Impreza GE/GH/GR/GV — Including WRX The Subaru Forester SH and Impreza GE/GH/GR/GV share the same dashboard architecture from 2007 to 2012. A single fascia SKU covers all variants — Forester, Impreza, WRX, and WRX STI — without requiring separate solutions for different body styles or performance grades. Chassis Code Specific — 2007 to 2012 Only The SF9-SB01 is precision-moulded for the SH Forester and GE/GH/GR/GV Impreza platforms. Earlier and later Forester and Impreza generations have different dashboard configurations and are not compatible. Confirm your vehicle's chassis code before purchasing. OEM-Style Dashboard Integration Precision moulding aligns with the factory Subaru dashboard mounting points and trim lines — producing a factory-finished result without the gaps, misalignment, or custom trimming required by universal fascia solutions. 9-Inch Trapezoid Format — Wide Head Unit Compatibility Supports the trapezoid 9-inch format used by Alpine (INE-AW409S, INE-AX809), Kenwood (DMX80AXS), Mongoose (Q9WCA), Pioneer (DMH-AP6650BT), and Aerpro (AM9X). Fascia Panel Only — Installer Flexibility Supplied as the fascia panel alone, allowing installers to specify the appropriate wiring harness, SWC interface, and accessories independently. Technical Specs Specification Detail Brand Stinger Part Number SF9-SB01 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Colour Not specified — confirm with Stinger Vehicle (Forester) Subaru Forester SH Series 2007–2012 Vehicle (Impreza) Subaru Impreza GE / GH / GR / GV 2007–2012 (inc. WRX / WRX STI) Shared Dashboard Yes — Forester SH and Impreza GE/GH/GR/GV Includes Fascia Panel Only Wiring Harness Not included Steering Wheel Control Not included Antenna Adapter Not included Camera Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Year / Series Subaru Forester 2007–2012 (SH Series) Subaru Impreza (inc. WRX / WRX STI) 2007–2012 (GE / GH / GR / GV Series) Compatible 9-inch trapezoid head units (confirm your unit's format before purchasing): Alpine INE-AW409S / INE-AX809 Kenwood DMX80AXS Mongoose Q9WCA Pioneer DMH-AP6650BT Aerpro AM9X Recommended accessories (sold separately): Aftermarket head unit harness adapter for Subaru Forester/Impreza 2007–2012 Steering wheel control interface for Subaru Forester/Impreza 2007–2012 Reverse camera retention harness for Subaru Forester/Impreza 2007–2012 Antenna adapter for Subaru Forester/Impreza 2007–2012 Frequently Asked Questions Does the SF9-SB01 fit both the Subaru Forester and Impreza? Yes — the SF9-SB01 fits both the Forester SH-series and Impreza GE, GH, GR, and GV-series from 2007 to 2012, including WRX and WRX STI variants. Both models share the same dashboard architecture during this production period. Is this fascia compatible with Subaru models outside the 2007–2012 range? No — the SF9-SB01 is designed specifically for the 2007–2012 model years of these Subaru platforms. Earlier or later Forester and Impreza models have different dashboard configurations and require separate fascia solutions. Verify your vehicle's build year and chassis code before purchasing. Does the SF9-SB01 include a wiring harness or steering wheel control interface? No — the SF9-SB01 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adapters, and camera retention accessories are all sold separately. A vehicle-specific harness kit is recommended to retain full factory features during installation. Which 9-inch trapezoid head units are compatible with this fascia? The SF9-SB01 suits Alpine INE-AW409S and INE-AX809, Kenwood DMX80AXS, Mongoose Q9WCA, Pioneer DMH-AP6650BT, and Aerpro AM9X. Confirm your chosen head unit uses the standard 9-inch trapezoid mounting format before purchasing. Do I need professional installation for the SF9-SB01? The fascia panel fitment itself is straightforward, but the broader head unit installation involves vehicle wiring and factory feature integration. Professional installation by a qualified car audio installer is strongly recommended to ensure correct wiring, full retention of factory features including steering wheel controls and reverse camera, and a professional finish. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-SB05 9" Trapezoid Fascia Subaru Liberty and Outback 2004-2009 A vehicle-specific 9" trapezoid fascia for the Subaru Liberty and Outback (2004-2009), the SF9-SB05 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting hardware must be sourced separately. Product Overview The Stinger SF9-SB05 is a 9" trapezoid fascia designed specifically for the Subaru Liberty and Outback from 2004-2009. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Subaru Liberty and Outback dashboard opening. The fascia is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Subaru Liberty and Outback 2004-2009 Specific Fitment: The SF9-SB05 is designed specifically for the Subaru Liberty and Outback from 2004-2009, providing a precise dashboard fit for 9" trapezoid head unit installations in these models. 9" Trapezoid Head Unit Aperture: The SF9-SB05 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-SB05 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia Only: The SF9-SB05 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-SB05 Brand Stinger Compatible Vehicles Subaru Liberty 2004-2009, Subaru Outback 2004-2009 Application 9" Trapezoid Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-SB05 is designed for the Subaru Liberty and Outback from 2004-2009 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm your specific Liberty or Outback variant and build date before purchase. Frequently Asked Questions Is the SF9-SB05 compatible with standard Double DIN head units? No. The SF9-SB05 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-SB05 include mounting brackets or wiring harnesses? No. The SF9-SB05 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-SB05? The SF9-SB05 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. What is the difference between the SF9-SB05, SF9-SB06, and SF9-SB07 for the Subaru Liberty and Outback? All three are vehicle-specific 9" trapezoid fascia kits for the Subaru Liberty and Outback sharing the same compatible head unit list. The SF9-SB05 suits 2004-2009 models, the SF9-SB06 suits 2009-2014 models, and the SF9-SB07 suits 2015-2018 models. Each generation uses a different dashboard profile requiring a separate fascia kit. Confirm your specific build date before purchase. Is the SF9-SB05 compatible with both the Subaru Liberty and Outback? Yes. The SF9-SB05 is confirmed compatible with both the Subaru Liberty and Outback from 2004-2009. Confirm your specific variant and build date before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-SB06 9" Trapezoid Fascia Subaru Liberty and Outback 2009-2014 A vehicle-specific 9" trapezoid fascia for the Subaru Liberty and Outback (2009-2014), the SF9-SB06 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting hardware must be sourced separately. Product Overview The Stinger SF9-SB06 is a 9" trapezoid fascia designed specifically for the Subaru Liberty and Outback from 2009-2014. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Subaru Liberty and Outback dashboard opening. The fascia is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Subaru Liberty and Outback 2009-2014 Specific Fitment: The SF9-SB06 is designed specifically for the Subaru Liberty and Outback from 2009-2014, providing a precise dashboard fit for 9" trapezoid head unit installations in these models. 9" Trapezoid Head Unit Aperture: The SF9-SB06 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-SB06 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia Only: The SF9-SB06 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-SB06 Brand Stinger Compatible Vehicles Subaru Liberty 2009-2014, Subaru Outback 2009-2014 Application 9" Trapezoid Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-SB06 is designed for the Subaru Liberty and Outback from 2009-2014 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm your specific Liberty or Outback variant and build date before purchase. Frequently Asked Questions Is the SF9-SB06 compatible with standard Double DIN head units? No. The SF9-SB06 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-SB06 include mounting brackets or wiring harnesses? No. The SF9-SB06 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-SB06? The SF9-SB06 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. What is the difference between the SF9-SB06 and the SF9-SB07 for the Subaru Liberty and Outback? Both are vehicle-specific 9" trapezoid fascia kits for the Subaru Liberty and Outback sharing the same compatible head unit list. The SF9-SB06 suits the 2009-2014 model years, while the SF9-SB07 suits the 2015-2018 model years. These generations use different dashboard profiles requiring separate fascia kits. Confirm your specific build date before purchase. Is the SF9-SB06 compatible with both the Subaru Liberty and Outback? Yes. The SF9-SB06 is confirmed compatible with both the Subaru Liberty and Outback from 2009-2014. Confirm your specific variant and build date before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SF9-SB07 9" Trapezoid Fascia Subaru Liberty and Outback 2015-2018 A vehicle-specific 9" trapezoid fascia for the Subaru Liberty and Outback (2015-2018), the SF9-SB07 is designed for compatible 9" trapezoid-shaped head units including the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S and INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia only - wiring harnesses, SWC interfaces, and mounting hardware must be sourced separately. Product Overview The Stinger SF9-SB07 is a 9" trapezoid fascia designed specifically for the Subaru Liberty and Outback from 2015-2018. It is engineered to accommodate compatible 9" trapezoid-shaped aftermarket head units in the Subaru Liberty and Outback dashboard opening. The fascia is supplied as a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Features & Benefits Subaru Liberty and Outback 2015-2018 Specific Fitment: The SF9-SB07 is designed specifically for the Subaru Liberty and Outback from 2015-2018, providing a precise dashboard fit for 9" trapezoid head unit installations in these models. 9" Trapezoid Head Unit Aperture: The SF9-SB07 provides the correct aperture for 9" trapezoid-shaped aftermarket head units. It is not compatible with standard DIN or Double DIN head units. Compatible with Multiple 9" Trapezoid Head Unit Brands: The SF9-SB07 is confirmed compatible with the following 9" trapezoid head units: Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Fascia Only: The SF9-SB07 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, antenna adaptors, and mounting hardware must be sourced separately for a complete installation. Technical Specs Specification Detail SKU SF9-SB07 Brand Stinger Compatible Vehicles Subaru Liberty 2015-2018, Subaru Outback 2015-2018 Application 9" Trapezoid Compatible Head Units Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, Mongoose Q9WCA Includes Fascia Only Compatible With The SF9-SB07 is designed for the Subaru Liberty and Outback from 2015-2018 with a 9" trapezoid head unit installation. It is not compatible with standard DIN or Double DIN head units. Confirmed compatible head units include the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Confirm your specific Liberty or Outback variant and build date before purchase. Frequently Asked Questions Is the SF9-SB07 compatible with standard Double DIN head units? No. The SF9-SB07 provides a 9" trapezoid aperture and is designed specifically for 9" trapezoid-shaped aftermarket head units only. It is not compatible with standard DIN or Double DIN head units. Does the SF9-SB07 include mounting brackets or wiring harnesses? No. The SF9-SB07 is a fascia panel only. Mounting brackets, wiring harnesses, steering wheel control interfaces, and antenna adaptors must be sourced separately for a complete installation. Which 9" trapezoid head units are compatible with the SF9-SB07? The SF9-SB07 is confirmed compatible with the Pioneer DMH-AP6650BT, Kenwood DMX80AXS, Alpine INE-AW409S, Alpine INE-AX809, Aerpro AM9X, and Mongoose Q9WCA. Is the SF9-SB07 compatible with both the Subaru Liberty and Outback? Yes. The SF9-SB07 is confirmed compatible with both the Subaru Liberty and Outback from 2015-2018. Confirm your specific variant and build date before purchase. Is the SF9-SB07 compatible with Subaru Liberty and Outback models outside the 2015-2018 date range? No. The SF9-SB07 is designed for the Subaru Liberty and Outback from 2015-2018 only. Models outside this date range use different dashboard profiles and require different fascia kits.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less