OEX Convoluted Split Tubing ID:12.6mm OD:15.7mm - Length 75m: Designed to Work with Convoluted Split OEX ACX1108 Features: Handy for tidying up wiring. Stops wires from dangling in dangerous places. Fire retardant polypropylene. Available in black only. Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Missing Link for Your SWC Install Universal, Compact, Plug & Play Product Overview The Stinger CPLEAD is a 30cm universal patch lead designed to connect Stinger Australia SWC interfaces to popular aftermarket head units. Whether you're completing a fresh install or replacing a damaged or missing lead, the CPLEAD provides the final connection between your steering wheel control interface and the head unit keeping everything plug-and-play. For more versatile applications, the connector can be removed to convert the CPLEAD into a 3.5mm to bare wire harness, enabling use with head units or interfaces that require a direct wire connection rather than a standard plug. It's a simple accessory that solves a common install problem cleanly. Key Specifications Manufacturer Part Number: CPLEAD Cable length: 30cm Connection type: Universal patch lead for SWC interfaces Compatible with: Stinger Australia SWC interfaces; popular branded aftermarket head units Alternative use: 3.5mm to bare wire harness (connector removable) Plug & Play: Yes Colour: Not specified Features & Benefits Universal Compatibility — Designed to work with popular branded aftermarket head units, making it a practical addition to any SWC install without needing to chase down a vehicle-specific lead. Plug & Play — Connects directly between the Stinger SWC interface and the head unit with no modification required for standard installations. Convertible to Bare Wire Harness — The connector can be removed to repurpose the CPLEAD as a 3.5mm to bare wire harness, expanding its use to head units or interfaces that require a direct wire connection. Compact 30cm Length — At 30cm, the lead is sized to run neatly within a dash cavity without excess cable to manage. Replacement or Spare — Useful as a direct replacement for a lost or damaged patch lead, or as a spare for workshop use across multiple installs. Technical Specs Specification Detail Part Number CPLEAD Brand Stinger Cable Length 30cm Connection Type Universal SWC patch lead Plug & Play Yes Connector Removable Yes — converts to 3.5mm to bare wire harness Compatible With Stinger Australia SWC interfaces; popular aftermarket head units Colour Not specified Compatible With / Goes Well With Stinger Australia SWC interfaces (all current HR-series kits) Popular branded aftermarket head units requiring a 3.5mm SWC input Applications requiring a 3.5mm to bare wire harness (connector removed) Frequently Asked Questions What is the Stinger CPLEAD used for? The CPLEAD is a 30cm patch lead that connects a Stinger SWC interface to an aftermarket head unit's SWC input. It provides the final link in a steering wheel control retention install and is compatible with popular branded head units. Can the CPLEAD be used without a Stinger SWC interface? Yes — with the connector removed, the CPLEAD becomes a 3.5mm to bare wire harness that can be used with head units or interfaces requiring a direct wire connection rather than a standard plug. How long is the CPLEAD patch lead? The CPLEAD is 30cm in length, sized to connect neatly within a standard dash cavity between the SWC interface and the head unit without excess cable. Is the CPLEAD compatible with all Stinger HR-series install kits? The CPLEAD is designed for use with existing Stinger Australia SWC interfaces, which includes the HR-series install kit range. Confirm compatibility with your specific interface model before purchase if unsure. Can I use the CPLEAD as a replacement for a lost or damaged patch lead? Yes — the CPLEAD is a universal lead and is suited for use as a direct replacement in any install where the original patch lead has been lost or damaged, provided the head unit accepts the standard connector type. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX Convoluted Split Tubing ID:9.7mm OD:12.8mm - Length 125m: Designed to Work with Convoluted Tubing OEX ACX1105 Features: Handy for tidying up wiring. Stops wires from dangling in dangerous places. Fire retardant polypropylene. Available in black only. Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized OEX dealer today!

Read more less

Flexible & Durable Solution For Bundling & Organising Cables!Features: Black Spiral Cable Wrap For cable diameters from 4mm to 50mm. 10 Metre Length Specifications: Cable Diameter: 4mm - 50mm Colour: Black Cable Length: 10M Packaging Type: Polybag Weight: 0.12kg Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Axis UHF 'T' Coaxial Connector 2F-1M Legendary Products & Support From Authorized Dealers When you choose Axis, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Axis dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Axis's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Axis dealer today!

Read more less

These Video Baluns Also Work Over Existing UTP Cabling, Making Them Perfect For Use In A Variety Of Applications. BNC Mini Passive Video Balun Enables the transmission of CCTV/HDTV video using ordinary unshielded twisted pair (UTP) wire instead of coaxial cable. Cost effective and much easier for installation. UTP cable is less expensive then coax cable, One cable runs all, one pair for video, two pair for power, and you got 1 pair for spare or 3 pairs for Y/Pb/Pr, one pair for SPDIF/IEC958 digital audio in HDTV applications. UTP cables have become increasingly popular in CCTV security installations because they are smaller in size than coaxial cables, making cable density less of a problem. They are also easier to terminate, which speeds installation. Product Features: Quality Video Over Ordinary Twisted Pair Cable. Transmits Monochrome Video Signal Up To (600 Meters) Or Color Video Signal Up To (400 Meters) High Immunity From Interference, Built-In Impedance Coupled Device & Noise Filter. Passive Devices (Do Not Require Power) Male BNC Connector Mounts Directly To Camera Or Video Source. Weather Resistant Design. Easier To Install Than Coax Applications. Intra-Building CCTV Installations (Instead Of Coaxial Cable) Structured Cabling (CAT5) Environments. To Eliminate Requirement For Plenum Coax. BNC Coax to Screw Terminals (No Need To Waste Time Crimping RJ-45 Connectors) Sliding Blister & Card Packaging Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

Teralume USB-PD-100W 100W Dual USB-C PD and Quick Charge 3.0 Charging Outlet A flush mount dual-port charging outlet delivering up to 100W via USB-C PD and 36W via Quick Charge 3.0 USB-A from a 12-24V DC supply, the USB-PD-100W is IP65 rated and supplied with a 1-metre terminated and fused braided cable for installation in 4WDs, campers, caravans, and mobile setups. Product Overview The Teralume USB-PD-100W is a dual-socket flush mount charging outlet providing up to 100W output on the USB-C PD port and up to 36W on the USB-A Quick Charge 3.0 port from a 12-24V DC input. The USB-C port operates at 5-20V to deliver power equivalent to modern wall chargers at up to 100W at 12V, making it suited to high-demand devices including laptops and the Starlink Mini. The USB-A port operates at 5-12V for Quick Charge 3.0 compatible devices. Connected devices automatically recognise and adjust to the appropriate charging protocol. The unit is IP65 rated for water resistance and is supplied with a 1-metre terminated and fused braided cable with battery terminals. The flush mount format requires a 28.6mm hole cut diameter, with the unit sitting 80mm deep and presenting a 36.5mm face diameter. Optional flush mount and surface mount adaptors are available separately. Features & Benefits 100W USB-C PD Output at 12V: The USB-C port delivers up to 100W at 5-20V, providing power equivalent to modern wall chargers from a 12V or 24V vehicle supply. This enables fast charging of high-demand devices including laptops, tablets, and the Starlink Mini from a mobile power source. 36W Quick Charge 3.0 USB-A Output: The USB-A port delivers up to 36W at 5-12V with Quick Charge 3.0 support, providing fast charging for smartphones and other QC 3.0-compatible devices alongside the USB-C port. 12-24V DC Input Compatibility: The USB-PD-100W operates from a 12V or 24V DC supply, making it compatible with passenger vehicles, 4WDs, trucks, campers, and caravans without modification to the power input. IP65 Water Resistance: The IP65 rating provides protection against dust ingress and water jets from any direction, making the USB-PD-100W suitable for installation in exposed locations within 4WD, camper, and caravan builds. Flush Mount Installation: The flush mount format integrates cleanly into a panel or console surface with a 28.6mm hole cut diameter. Optional flush mount and surface mount adaptors are available separately for alternative installation configurations. 1-Metre Terminated and Fused Braided Cable Included: The included 1-metre braided cable is terminated and fused with battery terminals for direct connection to the vehicle battery or power distribution system, providing a complete and protected wiring solution out of the box. Automatic Device Recognition and Protocol Adjustment: Connected devices automatically recognise and adjust to the appropriate charging protocol for optimal fast charging without manual configuration. Technical Specs Specification Detail SKU USB-PD-100W Brand Teralume Industries DC Input Voltage 12-24V DC USB-C Output 5-20V, up to 100W USB-A Output 5-12V, up to 36W (Quick Charge 3.0) IP Rating IP65 Face Diameter 36.5mm Unit Depth 80mm Hole Cut Diameter 28.6mm Mount Type Flush Mount Cable 1-Metre Terminated and Fused Braided Cable with Battery Terminals Optional Accessories Flush Mount Adaptors, Surface Mount Adaptors (sold separately) What's in the Box 1x 12V USB / USB-C PD Ultra Fast Charger - Flush Mount 1x 1-Metre Terminated and Fused Braided Cable with Battery Terminals Compatible With The USB-PD-100W is compatible with any 12V or 24V DC power supply including vehicle batteries, auxiliary batteries, and power distribution systems. The USB-C PD port is compatible with any USB-C PD device including laptops, tablets, smartphones, and the Starlink Mini. The USB-A port is compatible with Quick Charge 3.0 devices and standard USB-A devices. Devices automatically adjust to the appropriate charging protocol. Optional flush mount and surface mount adaptors are available separately for alternative installation configurations. Frequently Asked Questions Does the USB-PD-100W work on both 12V and 24V systems? Yes. The USB-PD-100W accepts a 12-24V DC input, making it compatible with standard 12V passenger and 4WD vehicle systems as well as 24V truck and heavy vehicle systems. Is the USB-PD-100W suitable for charging the Starlink Mini? Yes. The Starlink Mini requires a high-wattage USB-C power source to operate from a vehicle supply. The USB-PD-100W delivers up to 100W via USB-C PD at up to 20V, providing the power level required for Starlink Mini operation from a 12V or 24V DC supply. Is a surface mount option available? The USB-PD-100W is supplied as a flush mount unit requiring a 28.6mm hole cut. Optional flush mount and surface mount adaptors are available separately for alternative installation configurations. Does the included cable require additional fusing? The included 1-metre braided cable is supplied terminated and fused with battery terminals, providing an integrated fuse in the cable for direct battery connection without requiring a separate inline fuse. Can both ports be used simultaneously? Yes. The USB-PD-100W features dual ports and both the USB-C and USB-A ports can be used simultaneously for charging two devices at once.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Pop In. Wire Up. Factory Finish Square Socket Edition. Product Overview The DNA Automotive TOYSW04SL is a factory-fit SPST on/off switch designed to drop directly into the square blank switch socket found in compatible Toyota vehicles primarily the Prado 150 Series 2018-On and RAV4 2019-On, plus other Toyota models using the square switch format. Labelled "Starlink" to match the factory switch aesthetic, it replaces the square blanking insert with a functional 12VDC 3A switch with dual white LED illumination that lights up with the dash. No cutting, no drilling, no modification required. At 22mm H × 22mm W × 52mm D, the TOYSW04SL is purpose-built for the square factory blank socket a different fitment to the round-socket TOYSW03SL. The six-pin wiring configuration covers positive input, positive output, illumination positive, illumination earth, and chassis earth providing clean control of a relay-triggered accessory circuit with a professional, OEM-matched result. Key Specifications Part Number: TOYSW04SL Brand: DNA Automotive Switch Marking: Starlink Switch Type: SPST On/Off Voltage Rating: 12VDC Current Rating: 3A (positive switching only — inline fuse required, max 3A) Illumination: Dual white LED Colour: Black Dimensions: 22mm H × 22mm W × 52mm D Pin 1 (Black): Illumination Earth Pin 2 (Green): Positive Output — wire to relay Pin 3: Not used Pin 4 (White): Earth — wire to vehicle chassis Pin 5 (Red): Positive Input — wire to 12VDC positive (max 3A inline fuse required) Pin 6 (Yellow): Positive Input Illumination — wire to vehicle illumination positive Switching: Positive switching only Packaging: DNA Packaging Features & Benefits Direct factory square blank socket fitment — Designed to replace the square blank insert in compatible Toyota switch panels without any modification. Pop the blank out, plug the switch in. Maintains the factory finish with a professional, OEM-matched result — no aftermarket look, no panel gaps. SPST on/off with positive switching — Rated at 12VDC 3A for positive switching circuits. Wire Pin 2 (Positive Output) to the trigger terminal of a relay to control high-draw accessories — LED light bars, compressors, auxiliary lighting, lockers — keeping the switch within its 3A rating. An inline fuse rated to a maximum of 3A is required on the positive input (Pin 5). Dual white LED illumination — Pin 6 connects to the vehicle's illumination positive, with Pin 1 providing the illumination earth return. The switch face lights up with the dash — consistent illumination alongside factory Toyota switches on night drives. Six-pin wiring — clean, logical layout — The TOYSW04SL uses a six-pin configuration (top to bottom): illumination earth, positive output, positive input, and illumination positive. Four active pins cover all functions; Pin 3 is unused. The wiring is straightforward and fully documented. Starlink-labelled switch face — The "Starlink" label matches Toyota's connected multimedia system naming convention, integrating naturally into the factory Toyota switch panel for a purpose-built, cohesive appearance. Square socket — different from the TOYSW03SL — The TOYSW04SL fits the square factory blank socket (22mm H × 22mm W) used in newer Toyota platforms including the Prado 150 Series 2018-On and RAV4 2019-On. The TOYSW03SL fits the older round socket (32mm H × 20mm W). Confirm your vehicle's blank socket shape before ordering. OEM-matched black housing — Black finish blends with Toyota factory interiors across all listed platforms for a clean, consistent switch panel appearance. Technical Specs Specification Detail Part Number TOYSW04SL Switch Type SPST On/Off Voltage 12VDC Current Rating 3A Inline Fuse Required Yes — max 3A on Pin 5 positive input Switching Positive switching only Illumination Dual white LED Housing Colour Black Switch Marking Starlink Height 22mm Width 22mm Depth 52mm Pin 1 (Black) Illumination Earth Pin 2 (Green) Positive Output — to relay Pin 3 Not used Pin 4 (White) Earth — vehicle chassis Pin 5 (Red) Positive Input — 12VDC (max 3A inline fuse required) Pin 6 (Yellow) Positive Input Illumination Packaging DNA Packaging Compatible With / Goes Well With Confirmed Toyota Vehicles: Prado 150 Series 2018–On RAV4 2019–On Other Toyota vehicles using the square switch format (confirm socket dimensions — 22mm H × 22mm W — before purchase) Goes Well With: 12V relay (required for accessories drawing more than 3A) LED light bars, driving lights, auxiliary lighting (via relay) Air compressors, lockers, and other 12V accessories (via relay) 3A inline fuse (required on Pin 5 positive input) Frequently Asked Questions What is the difference between the TOYSW04SL and the TOYSW03SL? The TOYSW04SL fits the square factory blank socket (22mm H × 22mm W) used in newer Toyota vehicles including the Prado 150 2018-On and RAV4 2019-On. The TOYSW03SL fits the older round blank socket (32mm H × 20mm W). Confirm your socket shape before ordering. Does this switch require cutting or drilling to install? No. The TOYSW04SL pops directly into the square factory blank socket in compatible Toyota vehicles. Remove the existing blank insert and plug the switch in — no panel modification required. Is a fuse required and where does it go? Yes — a maximum 3A inline fuse is required on the positive input wire connected to Pin 5 (Red). Do not operate the switch without this fuse in line. What is the maximum load I can switch directly through this switch? The switch is rated at 12VDC 3A. For accessories drawing more than 3A, wire Pin 2 (Positive Output — Green) to the trigger of a relay rated for your accessory's current draw. The switch controls the relay, not the load. Do both illumination wires need to be connected for the switch to light up? Yes. The TOYSW04SL uses a two-wire illumination circuit — Pin 6 (Yellow) for illumination positive and Pin 1 (Black) for illumination earth. Both must be connected for the LED to illuminate. Connect Pin 6 to the vehicle illumination positive and Pin 1 to chassis earth.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Pop In. Wire Up. Factory Finish. Product Overview The DNA Automotive TOYSW03SL is a factory-fit SPST on/off switch designed to drop directly into the small blank switch socket found in a wide range of Toyota vehicles and select 2018/2019 Mitsubishi models. Labelled "Starlink" to match the factory switch aesthetic, it replaces the standard blanking insert with a functional 12VDC 3A switch rated for positive switching, with dual white LED illumination that lights up with the dash. No cutting, no drilling, no modification pop the blank out, plug the switch in, run four wires, and you're done. At 32mm H × 20mm W × 52mm D, the TOYSW03SL matches the factory small blank socket dimensions across Hilux, Prado, Landcruiser 200 Series, Kluger, Fortuner, Corolla, Camry, RAV4, and Tundra applications. The black housing matches factory Toyota interiors for a clean, OEM-matched result that looks like it came from the dealership not the aftermarket parts bin. Key Specifications Part Number: TOYSW03SL Brand: DNA Automotive Switch Marking: Starlink Switch Type: SPST On/Off Voltage Rating: 12VDC Current Rating: 3A (positive switching only) Illumination: Dual white LED Colour: Black Dimensions: 32mm H × 20mm W × 52mm D Pin 1 (Green): Positive Input — wire to battery or ACC+ Pin 2 (Red): Positive Output — wire to relay Pin 3: Not used Pin 4 (Red): 12V Positive Illumination — connect to vehicle illumination circuit Pin 5 (Black): Earth — run to vehicle ground/chassis Packaging: DNA Blister & Card Features & Benefits Direct factory blank socket fitment — Designed to replace the small blank insert in compatible Toyota switch panels without any modification. Pop the blank out, plug the switch in. The result looks factory-fitted because it is factory-sized — essential for 4WD builds and touring setups where a professional, clean dashboard finish matters. SPST on/off with positive switching — Rated at 12VDC 3A for positive switching circuits. Wire Pin 2 to the trigger of a relay to control high-draw accessories — LED light bars, compressors, air horns, auxiliary lighting — keeping the switch within its 3A rating and protecting the circuit. Do not use as a direct load switch for accessories drawing more than 3A. Dual white LED illumination — Pin 4 connects to the vehicle's illumination positive so the switch lights up with the dash. On a night drive through the Pilbara or down the Nullarbor, your aux switches should look the part — the dual white LED delivers consistent, matched illumination alongside factory switches. Starlink-labelled switch face — The "Starlink" label matches Toyota's connected multimedia system naming convention, integrating naturally into Toyota switch panels. Purpose-built for setups where a dedicated Starlink function switch is required within the factory panel layout. OEM-matched black housing — Black finish matches Toyota factory interiors across all listed platforms. No colour mismatch, no aftermarket look — the switch sits flush and consistent with adjacent factory switches. DNA Blister & Card retail packaging — Retail-ready packaging with all specifications and wiring information on-pack for consumer purchase and shelf display. Technical Specs Specification Detail Part Number TOYSW03SL Switch Type SPST On/Off Voltage 12VDC Current Rating 3A Switching Positive switching only Illumination Dual white LED Illumination Input 12V positive (Pin 4) Housing Colour Black Switch Marking Starlink Height 32mm Width 20mm Depth 52mm Pin 1 (Green) Positive Input — Battery or ACC+ Pin 2 (Red) Positive Output — to relay Pin 3 Not used Pin 4 (Red) 12V Positive Illumination Pin 5 (Black) Earth / vehicle chassis ground Packaging DNA Blister & Card Compatible With / Goes Well With Confirmed Toyota Vehicles: Camry 2011–2014 Corolla 2006–2013 Fortuner 2015–On Hilux 2015–On Kluger 2007–On Landcruiser 200 Series 2016–On Prado 200 Series 2015–On Prado 150 Series 2010–2018 RAV4 2006–2011 Tundra 2007–2013 Also Suits: Most 2018/2019 Mitsubishi Pajero Most 2018/2019 Mitsubishi Triton Goes Well With: 12V relay (required for accessories drawing more than 3A) LED light bars, driving lights, auxiliary lighting (via relay) Air compressors, lockers, and other 12V accessories (via relay) Frequently Asked Questions Does this switch require cutting or drilling to install? No. The TOYSW03SL pops directly into the small factory blank socket in compatible Toyota vehicles. Remove the existing blank insert and plug the switch in — no panel modification required. What is the maximum load I can switch directly through this switch? The switch is rated at 12VDC 3A. For accessories drawing more than 3A, wire Pin 2 to the trigger terminal of an appropriately rated relay — the switch controls the relay, not the load directly. Which blank socket size does this switch fit? This switch fits the small factory blank socket, with dimensions of 32mm H × 20mm W × 52mm D. Toyota switch panels typically include both small and large blank sockets — confirm your available blank is the small size before ordering. Does the illumination wire have to be connected for the switch to work? No. Pin 4 (illumination positive) is optional — the on/off switching function operates independently. Connecting Pin 4 to the vehicle illumination circuit enables the switch face to light up with the dash lighting. Does this switch suit Mitsubishi vehicles as well as Toyota? Yes, it suits most 2018/2019 Mitsubishi Pajero and Triton models in addition to the listed Toyota vehicles. Verify that your Mitsubishi's blank socket dimensions match 32mm H × 20mm W × 52mm D before purchase, as compatibility is confirmed for most but not all variants.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 SW-1010A Next Gen Ford Ranger XL and XLS Switch Panel Insert Suits 10 Inch Screen A powder coated stainless mesh switch panel insert for the Next Gen Ford Ranger XL and XLS with a 10 inch touch screen, providing 4 aftermarket Toyota-style switch positions and a factory USB socket remount in a stylish clip-in panel. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Please note: This panel does NOT fit the XLT or Sport variants. See our separate listing for the XLT and Sport. For vehicles with a 12 inch touch screen (Raptor, Everest, or Wildtrak), please see our separate 12 inch listing. Product Overview The GMF4x4 SW-1010A is a stainless mesh switch panel insert designed specifically for the Next Gen Ford Ranger XL and XLS with a 10 inch touch screen. The quick clip-in design allows four aftermarket Toyota-style switches to be installed neatly alongside the factory USB socket, which is remounted within the panel for a clean, factory-style finish. The panel is powder coated black and installs in approximately 5 minutes with no drilling required. One stainless mesh panel and installation instructions are included. Please note this panel is designed exclusively for the XL and XLS variants with a 10 inch screen. It does not fit the XLT or Sport. Owners of Raptor, Everest, or Wildtrak models with a 12 inch screen should refer to our separate 12 inch listing. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. What's in the Box 1x Stainless Mesh Switch Panel 1x Installation Instructions Features & Benefits The clip-in design requires no drilling and installs in approximately 5 minutes, giving a clean and professional switch mounting solution without permanent modification to the vehicle. Four Toyota-style aftermarket switch positions allow accessories such as lights, lockers, air compressors, and other 12V accessories to be switched on and off from a single organised panel location. The factory USB socket is remounted within the panel, keeping the USB port accessible and integrating it into the new switch panel layout without losing factory functionality. The powder coated black finish and stainless mesh construction provide a durable, premium appearance that complements the Next Gen Ranger interior. Technical Specs Specification Detail SKU SW-1010A Brand GMF4x4 Compatible Vehicle Next Gen Ford Ranger XL and XLS Compatible Screen Size 10 Inch Touch Screen Not Compatible With Ford Ranger XLT, Sport (see separate listing) Not Compatible With Raptor, Everest, Wildtrak 12" screen (see separate listing) Switch Positions 4 x Toyota-Style Aftermarket Switch Positions Factory USB Yes, remounted within panel Panel Material Stainless Mesh Finish Powder Coated Black Mounting Method Clip-in Drilling Required No Installation Time Approx. 5 minutes Included 1x Stainless Mesh Panel, 1x Installation Instructions Origin Made in Australia Compatible With Next Gen Ford Ranger XL (10 inch touch screen) Next Gen Ford Ranger XLS (10 inch touch screen) Not compatible with Ford Ranger XLT, Sport, Raptor, Everest, or Wildtrak. Frequently Asked Questions Will this panel fit my Ranger XLT or Sport? No. The SW-1010A is designed exclusively for the Next Gen Ford Ranger XL and XLS with a 10 inch touch screen. It does not fit the XLT or Sport variants. Please see our separate listing for the XLT and Sport. I have a Raptor, Everest, or Wildtrak. Will this fit? No. The SW-1010A is for the 10 inch screen found in the XL and XLS. The Raptor, Everest, and Wildtrak use a 12 inch touch screen. Please see our separate 12 inch listing for those models. What type of switches fit this panel? The SW-1010A accommodates four Toyota-style aftermarket switches. Please check with us for compatible switch options if required. Does installation require drilling? No. The SW-1010A uses a quick clip-in design that installs in approximately 5 minutes without any drilling or permanent modification to the vehicle. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 SW-1010B Next Gen Ford Ranger XLT and Sport Switch Panel Insert Suits 10 Inch Screen A powder coated stainless mesh switch panel insert for the Next Gen Ford Ranger XLT and Sport with a 10 inch touch screen, providing 4 aftermarket Toyota-style switch positions and a factory USB socket remount in a stylish clip-in panel. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Please note: This panel does NOT fit the XL or XLS variants. See our separate listing for the XL and XLS. For vehicles with a 12 inch touch screen (Raptor, Everest, or Wildtrak), please see our separate 12 inch listing. Product Overview The GMF4x4 SW-1010B is a stainless mesh switch panel insert designed specifically for the Next Gen Ford Ranger XLT and Sport with a 10 inch touch screen. The quick clip-in design allows four aftermarket Toyota-style switches to be installed neatly alongside the factory USB socket, which is remounted within the panel for a clean, factory-style finish. The panel is powder coated black and installs in approximately 5 minutes with no drilling required. One stainless mesh panel and installation instructions are included. Please note this panel is designed exclusively for the XLT and Sport variants with a 10 inch screen. It does not fit the XL or XLS. Owners of Raptor, Everest, or Wildtrak models with a 12 inch screen should refer to our separate 12 inch listing. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. What's in the Box 1x Stainless Mesh Switch Panel 1x Installation Instructions Features & Benefits The clip-in design requires no drilling and installs in approximately 5 minutes, providing a clean and professional switch mounting solution without permanent modification to the vehicle. Four Toyota-style aftermarket switch positions allow accessories such as lights, lockers, air compressors, and other 12V accessories to be controlled from a single organised panel location. The factory USB socket is remounted within the panel, keeping the USB port accessible and integrating it into the new switch panel layout without losing factory functionality. The powder coated black finish and stainless mesh construction provide a durable, premium appearance that complements the Next Gen Ranger interior. Technical Specs Specification Detail SKU SW-1010B Brand GMF4x4 Compatible Vehicle Next Gen Ford Ranger XLT and Sport Compatible Screen Size 10 Inch Touch Screen Not Compatible With Ford Ranger XL, XLS (see separate listing) Not Compatible With Raptor, Everest, Wildtrak 12" screen (see separate listing) Switch Positions 4 x Toyota-Style Aftermarket Switch Positions Factory USB Yes, remounted within panel Panel Material Stainless Mesh Finish Powder Coated Black Mounting Method Clip-in Drilling Required No Installation Time Approx. 5 minutes Included 1x Stainless Mesh Panel, 1x Installation Instructions Origin Made in Australia Compatible With Next Gen Ford Ranger XLT (10 inch touch screen) Next Gen Ford Ranger Sport (10 inch touch screen) Not compatible with Ford Ranger XL, XLS, Raptor, Everest, or Wildtrak. Frequently Asked Questions Will this panel fit my Ranger XL or XLS? No. The SW-1010B is designed exclusively for the Next Gen Ford Ranger XLT and Sport with a 10 inch touch screen. It does not fit the XL or XLS variants. Please see our separate listing for the XL and XLS. I have a Raptor, Everest, or Wildtrak. Will this fit? No. The SW-1010B is for the 10 inch screen found in the XLT and Sport. The Raptor, Everest, and Wildtrak use a 12 inch touch screen. Please see our separate 12 inch listing for those models. What type of switches fit this panel? The SW-1010B accommodates four Toyota-style aftermarket switches. Please check with us for compatible switch options if required. Does installation require drilling? No. The SW-1010B uses a quick clip-in design that installs in approximately 5 minutes without any drilling or permanent modification to the vehicle. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The cleanest way to panel-mount your DNA PA series socket Product Overview The DNA PA001 is a single-hole flush mount panel designed to house any socket from the DNA PA series range. If you're running a PA010, PA011, PA012, PA013, PA014, or PA016 or any of the PA100, PA403 series sockets this panel lets you remove them from their original housing and mount them cleanly into a dash, console, or custom panel. It's a straightforward, no fuss solution for installers and DIYers who want a tidy, professional-looking finish when integrating DNA PA sockets into a vehicle, caravan, or custom build. The compact footprint makes it easy to fit into tight spaces without cutting large openings. Key Specifications Panel dimensions: 60.2mm (L) x 42.3mm (W) x 5.4mm (D) Socket cutout diameter: 29mm Single-hole flush mount design Compatible with DNA PA series sockets (PA010 through PA403 range) Supplied in poly bag with barcode sticker Features & Benefits Flush mount design — sits flush against your panel surface for a factory-finished look, whether you're mounting in a centre console, overhead panel, or custom enclosure Universal PA series fit — accepts the full DNA PA range including PA010, PA011, PA012, PA013, PA014, PA016, PA100–PA105, PA200–PA203, PA300–PA304, and PA400–PA403 Compact footprint — at just 60.2mm x 42.3mm, it fits neatly into tight dash or console locations common in 4WDs, utes, and caravans Simple installation — simply remove your PA socket from its original housing and press it into this panel; no specialist tools required Clean OEM-style result — ideal for builds where exposed socket housings look out of place Technical Specs Length: 60.2mm Width: 42.3mm Depth: 5.4mm Socket hole diameter: 29mm Mount type: Single hole, flush mount Packaging: Poly bag with barcode sticker Compatible With Confirmed compatible DNA PA series sockets: PA010, PA011, PA012, PA013, PA014, PA016 PA100, PA101, PA102, PA104, PA105 PA200, PA201, PA202, PA203 PA300, PA301, PA302, PA304 PA400, PA401, PA402, PA403 Goes well with: DNA PA series power sockets and accessories Custom console and dash panel builds 4WD, caravan, and ute fitouts requiring flush-mounted power points Note: Compatibility is confirmed for the DNA PA series listed above only. Fitment with non-DNA sockets is not specified verify socket diameter (29mm) before use with third-party products. Frequently Asked Questions What PA series sockets does the PA001 panel fit? The PA001 is confirmed compatible with DNA PA series sockets PA010, PA016, PA100, PA105, PA200, PA203, PA300, PA304, and PA400, PA403. Simply remove the socket from its original housing to fit. How does the flush mount installation work? Remove your DNA PA socket from its supplied housing and press it into the 29mm cutout on the PA001 panel. No specialist tools are required for a clean, flush finish. What are the panel dimensions? The PA001 measures 60.2mm long x 42.3mm wide x 5.4mm deep, with a 29mm diameter socket hole. It's compact enough for tight console and dash locations. Will this panel work with non-DNA sockets? Compatibility is only confirmed for the DNA PA series listed. If using a third-party socket, verify it has a 29mm diameter before purchasing. Does this come ready to install? Yes. The PA001 ships in a poly bag and requires no additional hardware for basic installation. Your PA series socket presses directly into the panel cutout. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less