Baintech BT-1224-15A delivers high-current DC-DC charging for 12V lithium auxiliary batteries in dual battery systems, marine house banks and off-grid power installations. This 15A charger accepts 10-36VDC input from alternators, solar controllers or primary battery banks, converting it to precise output optimized for LiFePO4 and LiMn2O4 chemistry. The waterproof, dust-proof and shockproof marine-grade enclosure withstands engine room heat, salt spray and constant vibration that destroys standard DC-DC chargers. Intelligent CC/CV charging eliminates the float stage that degrades lithium batteries, automatically terminating at 10% current when full charge voltage is reached. Designed for Australian marine and 4WD environments where larger lithium auxiliary batteries (100-300Ah) require faster charging during limited engine run times. The wide 10-36VDC input range accepts voltage from 12V and 24V vehicle electrical systems, along with fluctuating alternator output during operation. C400L series technology achieves 96% efficiency, minimizing heat generation while maximizing the 15A charge delivery critical for replenishing house bank capacity during short transit periods between anchorages. Key Specifications Rated output: 12V DC, 15A (600W maximum) Input voltage range: 10-36VDC (multi-voltage compatibility) Battery chemistry: LiFePO4 and LiMn2O4 lithium batteries Charging profile: CC/CV (Constant Current/Constant Voltage) CC cutoff voltage: 14.6V (LiFePO4), 12.6V (LiMn2O4 3-series) Charging efficiency: Up to 96% Environmental protection: Waterproof, dust-proof, shockproof (marine grade) Safety certifications: CE, RoHS, ISO9001-2015 Protection features: Over-voltage, over-temperature, over-current, short circuit Features & Benefits High-Current 15A Output: Delivers 50% more charging current than 10A models, reducing charge times for larger auxiliary battery banks. Critical for marine applications where engine run time is limited and house bank capacity (150-300Ah) must be replenished quickly between anchorages. Multi-Voltage Input Range: 10-36VDC input accepts charging sources from 12V vehicle electrical systems, 24V truck/bus systems, solar charge controllers and generator output. Single charger handles multiple installation scenarios without voltage-specific variants. Lithium-Specific Charging Algorithm: Delivers precise 14.6V cutoff for LiFePO4 or 12.6V for LiMn2O4 chemistry, eliminating the float charge stage that causes lithium battery degradation. Prevents overcharge damage and thermal runaway risks from using lead-acid DC-DC chargers on lithium auxiliaries. Marine-Grade Environmental Protection: Waterproof, dust-proof and shockproof construction withstands engine room spray, bilge water exposure and constant vibration. Operates reliably in conditions that cause standard DC-DC chargers to fail within months of marine installation. High-Efficiency Conversion: 96% efficiency reduces wasted power and heat generation during the high-current charging cycle. Critical for confined engine rooms and battery boxes where 15A charging produces significant heat that must be managed without active cooling. Intelligent Charge Termination: Automatically reduces charge current to 10% upon reaching full charge voltage, then terminates without float charging. Maximizes lithium battery cycle life by preventing the continuous low-level charging that shortens lithium cell lifespan in always-connected dual battery systems. Technical Specs Model: BT-1224-15A Series: C400L Rated output voltage: 12V DC Rated output current: 15A Maximum output power: 600W (15A x 12V = 180W nominal, up to 600W during bulk charge phase) Input voltage range: 10-36VDC Battery chemistry compatibility: LiFePO4, LiMn2O4 Charging method: CC/CV (Constant Current/Constant Voltage) CC cutoff voltage (LiFePO4): 14.6V CC cutoff voltage (LiMn2O4 3-series): 12.6V Charge termination: 10% current reduction at full voltage Float charging: None (lithium-optimized) Conversion efficiency: Up to 96% Technology: Advanced switching mode power supply Environmental protection: Waterproof, dust-proof, shockproof Over-voltage protection: Yes Over-temperature protection: Yes Over-current protection: Yes (CC mode) Short circuit protection: Yes Output terminal type: Universal battery system compatibility Certifications: CE, RoHS, ISO9001-2015 Compatible With / Goes Well With 12V LiFePO4 auxiliary battery systems (100Ah-300Ah optimal range) 12V LiMn2O4 lithium house banks (marine applications) High-capacity dual battery systems (vehicle primary to lithium auxiliary) Marine electrical systems with lithium house banks (150Ah+) 4WD and caravan lithium battery upgrades (larger capacity installations) Solar charge controller integration (10-36VDC output) 24V truck/bus systems charging 12V auxiliary batteries Off-grid power systems requiring fast charge capability Caution: Output is 12V only. This charger cannot charge 24V or 36V auxiliary battery systems. Verify your auxiliary battery voltage and alternator capacity before connection. How much faster does 15A charge compared to 10A models? Approximately 50% faster for the same battery capacity. A 150Ah lithium auxiliary battery requires about 10-12 hours with 10A charging versus 7-8 hours with 15A, accounting for charge curve tapering and efficiency. Can my alternator handle the 15A draw from this charger? Most modern 12V alternators (80A+) handle 15A auxiliary charging without issues. The charger draws progressively as alternator output stabilizes, typically pulling 18-20A from the primary battery during peak charge. Verify your alternator capacity before installation. Will this work in a 24V truck dual battery system? Yes, the 10-36VDC input range covers 24V vehicle electrical systems (typically 27-28V during alternator charging). The charger outputs regulated 12V to charge a 12V auxiliary lithium battery from the 24V primary system. Is this suitable for below-deck marine installations? Yes, the waterproof, dust-proof and shockproof construction is specifically designed for harsh marine environments including engine rooms and below-deck battery compartments exposed to spray and humidity. Does the higher current create more heat in confined spaces? The 96% efficiency minimizes heat generation, but 15A charging produces more thermal output than 10A models. Ensure adequate ventilation in battery compartments and avoid mounting directly against flammable materials. The over-temperature protection will reduce output if thermal limits are reached.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Baintech BT-1212-30A delivers professional high-current DC-DC charging for large 12V lithium auxiliary batteries in marine, 4WD and commercial vehicle applications This 30A charger accepts 10-36VDC input from alternators, solar controllers or primary battery banks, converting it to precise output optimized for LiFePO4 and LiMn2O4 chemistry. The waterproof, dust-proof and shockproof marine-grade enclosure withstands engine room heat, salt spray and constant vibration, while LED status indicators provide instant charging state feedback. Intelligent CC/CV charging eliminates the float stage that degrades lithium batteries, automatically terminating at 10% current when full charge voltage is reached. Designed for Australian marine and expedition 4WD environments where large lithium house banks (200-500Ah) require rapid charging during limited engine run times. The wide 10-36VDC input range accepts voltage from 12V and 24V vehicle electrical systems, along with fluctuating alternator output. C400L series technology achieves 96% efficiency while natural cooling eliminates fan noise and mechanical failure points. The compact, lightweight design fits tight engine room spaces while the 2-year warranty provides confidence for critical electrical system installations. Key Specifications Rated output: 12V DC, 30A (maximum 440W) Input voltage range: 10-36VDC (multi-voltage compatibility) Battery chemistry: LiFePO4 and LiMn2O4 lithium batteries Charging profile: CC/CV (Constant Current/Constant Voltage) CC cutoff voltage: 14.6V (LiFePO4), 12.6V (LiMn2O4 3-series) Charging efficiency: Up to 96% Environmental protection: Waterproof, dust-proof, shockproof (marine grade) Cooling method: Natural convection (fanless design) Status indicator: LED charging state display Warranty: 2 years limited warranty Safety certifications: CE, RoHS, ISO9001-2015 Protection features: Over-voltage, over-temperature, over-current, short circuit Features & Benefits Professional 30A Output: Delivers double the charging current of 15A models, dramatically reducing charge times for large auxiliary battery banks. Essential for marine liveaboard setups and expedition vehicles where 200-500Ah lithium house banks must be replenished quickly during short engine run times between anchorages or remote campsites. LED Charging State Indicator: Visual feedback shows charging status at a glance without requiring external monitoring equipment. Critical for confirming charge initiation after engine start and monitoring charge completion in remote installations where battery monitors aren't fitted. Natural Convection Cooling: Fanless design eliminates mechanical failure points and noise pollution in living spaces. The compact, lightweight construction dissipates heat through the marine-grade enclosure without requiring forced air cooling that draws dust and moisture into electronics. Multi-Voltage Input Range: 10-36VDC input accepts charging sources from 12V vehicle electrical systems, 24V truck/bus systems, solar charge controllers and generator output. Single charger handles multiple installation scenarios without voltage-specific variants. Lithium-Specific Charging Algorithm: Delivers precise 14.6V cutoff for LiFePO4 or 12.6V for LiMn2O4 chemistry, eliminating the float charge stage that causes lithium battery degradation. Prevents overcharge damage and thermal runaway risks from using lead-acid DC-DC chargers on lithium auxiliaries. Marine-Grade Environmental Protection: Waterproof, dust-proof and shockproof construction withstands engine room spray, bilge water exposure and constant vibration. Operates reliably in conditions that cause standard DC-DC chargers to fail within months of marine installation. 2-Year Warranty Coverage: Manufacturer-backed warranty provides confidence for critical electrical system installations where charger failure could strand vessels or vehicles in remote locations. Technical Specs Model: BT-1212-30A Series: C400L Rated output voltage: 12V DC Rated output current: 30A Maximum output power: 440W (30A x 14.6V during bulk charge) Input voltage range: 10-36VDC Battery chemistry compatibility: LiFePO4, LiMn2O4 Charging method: CC/CV (Constant Current/Constant Voltage) CC cutoff voltage (LiFePO4): 14.6V CC cutoff voltage (LiMn2O4 3-series): 12.6V Charge termination: 10% current reduction at full voltage Float charging: None (lithium-optimized) Conversion efficiency: Up to 96% Technology: Advanced switching mode power supply Cooling system: Natural convection (fanless) Status indicator: LED display showing charging state Environmental protection: Waterproof, dust-proof, shockproof Over-voltage protection: Yes Over-temperature protection: Yes Over-current protection: Yes (CC mode) Short circuit protection: Yes Output terminal type: Universal battery system compatibility Certifications: CE, RoHS, ISO9001-2015 Warranty period: 2 years limited warranty Compatible With / Goes Well With 12V LiFePO4 auxiliary battery systems (200Ah-500Ah optimal range) 12V LiMn2O4 lithium house banks (large marine installations) High-capacity dual battery systems (expedition vehicles) Marine electrical systems with lithium house banks (200Ah+) 4WD and expedition caravan lithium battery systems Solar charge controller integration (10-36VDC output) 24V truck/commercial vehicle systems charging 12V auxiliaries Off-grid power systems requiring rapid charge capability High-output alternators (100A+ recommended) Caution: Output is 12V only. This charger cannot charge 24V or 36V auxiliary battery systems. Verify your auxiliary battery voltage and alternator capacity (minimum 100A recommended) before connection. Frequently Asked Questions Can my alternator handle the 30A charging current? You'll need a minimum 100A alternator for reliable 30A auxiliary charging. The charger draws approximately 35-40A from the primary battery during peak charge, so verify your alternator has sufficient capacity beyond vehicle electrical loads before installation. How much faster is 30A compared to 15A charging? Approximately twice as fast for the same battery capacity. A 200Ah lithium auxiliary battery requires about 14-16 hours with 15A charging versus 7-8 hours with 30A, accounting for charge curve tapering and efficiency. Will 30A charging generate excessive heat in engine rooms? The 96% efficiency and natural convection cooling manage heat effectively, but 30A charging produces significant thermal output. Ensure adequate ventilation around the charger and avoid mounting in sealed compartments. The over-temperature protection will reduce output if thermal limits are reached. Does this work with 24V truck electrical systems? Yes, the 10-36VDC input range covers 24V vehicle electrical systems (typically 27-28V during alternator charging). The charger outputs regulated 12V to charge a 12V auxiliary lithium battery from the 24V primary system. What do the LED indicators show? The LED display indicates charging state, though specific colour codes or patterns are not detailed in the supplied documentation. Contact F.A.E. for LED indicator interpretation guide specific to this model. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Baintech BT-1212-15A delivers reliable DC-DC charging for 12V lithium auxiliary batteries in dual battery systems, marine house banks and 4WD touring setups. This 15A charger accepts DC input from vehicle alternators or primary battery banks, converting it to precise output optimized for lithium chemistry. The waterproof, dust-proof and shockproof marine-grade enclosure mounts in almost any location, from engine rooms to under-seat battery compartments. Compact and lightweight construction fits tight installation spaces while imported high-reliability capacitors ensure consistent performance across Australia's extreme temperature and vibration conditions. Designed for marine and off-road environments where auxiliary lithium batteries (100-200Ah) require fast charging during limited engine run times. The non-isolated design delivers efficient power conversion while comprehensive protection circuits safeguard against over-voltage, low voltage, over-temperature, overload and short circuits. Backed by a 2-year limited warranty, this charger provides confidence for critical dual battery installations where charging system failure could compromise safety in remote locations. Key Specifications Rated output: 12V DC, 15A Input type: DC (non-isolated input/output) Battery chemistry: Lithium (LiFePO4 and LiMn2O4 optimized) Environmental protection: Waterproof, dust-proof, shockproof (marine grade) Cooling method: Natural convection (compact, lightweight design) Component quality: Imported high-reliability capacitors Warranty: 2 years limited warranty Safety certifications: CE, RoHS Protection features: Over-voltage, low voltage, over-temperature, overload, short circuit Features & Benefits Versatile Mounting Options: Compact, lightweight design with waterproof construction mounts in almost any location including engine rooms, battery compartments, under seats and external caravan boxes. Eliminates installation constraints that limit charger placement in space-restricted builds. High-Reliability Components: Imported capacitors deliver consistent performance under Australian heat, vibration and voltage fluctuations. Critical for marine and off-road applications where component failure in remote locations creates safety risks and expensive recovery operations. Comprehensive Protection Suite: Five-layer protection against over-voltage, low voltage, over-temperature, overload and short circuits safeguards both charger and battery investment. Prevents damage from alternator voltage spikes, deep primary battery discharge and electrical system faults. Marine-Grade Environmental Protection: Waterproof, dust-proof and shockproof construction withstands engine room spray, bilge water exposure and constant vibration. Operates reliably in conditions that cause standard DC-DC chargers to corrode or fail within the first season. Non-Isolated Design Efficiency: Direct electrical connection between input and output delivers efficient power conversion with minimal heat generation. Suitable for applications where input and output share common negative (ground) connections, typical in most vehicle dual battery systems. 2-Year Warranty Coverage: Manufacturer-backed warranty provides confidence for critical electrical system installations. Demonstrates manufacturer commitment to product reliability in harsh Australian marine and off-road environments. Technical Specs Model: BT-1212-15A Rated output voltage: 12V DC Rated output current: 15A Maximum output power: Not specified (approximately 180-220W depending on charge stage) Input voltage range: Not specified (typical 12V DC systems) Input/output configuration: Non-isolated (common ground) Battery chemistry compatibility: Lithium (LiFePO4, LiMn2O4) Charging method: Not specified (likely CC/CV for lithium) Environmental protection: Waterproof, dust-proof, shockproof Mounting: Universal (mounts in almost any location) Construction: Compact and lightweight Component specification: Imported high-reliability capacitors Over-voltage protection: Yes Low voltage protection: Yes (prevents deep discharge of primary battery) Over-temperature protection: Yes Overload protection: Yes Short circuit protection: Yes Certifications: CE, RoHS Warranty period: 2 years limited warranty Compatible With / Goes Well With 12V LiFePO4 auxiliary battery systems (75Ah-200Ah optimal range) 12V LiMn2O4 lithium house banks Dual battery systems in 4WD vehicles, utes and wagons Marine electrical systems with 12V lithium auxiliaries (dry mounting locations) Caravan and camper trailer battery systems Vehicle-based solar charging integration Trade and commercial vehicle auxiliary power systems Off-grid touring and expedition electrical setups Caution: Non-isolated design requires common ground between input and output. Verify your system configuration before installation. Output is 12V only and optimized for lithium chemistry. Frequently Asked Questions What does "non-isolated" mean for installation? Non-isolated means the input negative and output negative share a common ground connection. This is standard for most vehicle dual battery systems where both batteries share the chassis ground. Do not use in applications requiring electrical isolation between input and output circuits. Can this charge from a 12V alternator while driving? Yes, this is designed for alternator-based charging in 12V vehicle electrical systems. The charger regulates current draw to protect the alternator while maximizing charge delivery to the auxiliary lithium battery during engine operation. Where can I mount this charger? The waterproof, dust-proof construction allows mounting in engine rooms, battery boxes, under seats, external caravan compartments and most other locations. Ensure adequate ventilation around the unit and avoid sealing in completely enclosed spaces. Does this work with lead-acid auxiliary batteries? This charger is optimized for lithium chemistry (LiFePO4 and LiMn2O4). While it may charge lead-acid batteries, voltage profiles may not match lead-acid requirements. Use lithium-specific chargers only with lithium batteries for optimal performance and safety. What is the low voltage protection for? Low voltage protection prevents the charger from draining your primary (starter) battery below safe levels. When primary battery voltage drops too low, the charger reduces or stops auxiliary charging to preserve starting capacity. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Baintech SF50634 battery master switch provides 3-pole electrical isolation for marine, 4WD and caravan battery systems This contour-mounted switch disconnects positive, negative and auxiliary circuits simultaneously, delivering complete system isolation during storage, maintenance or emergency shutdown scenarios. The 3-pole configuration suits dual battery installations where both starter and auxiliary batteries require simultaneous disconnection, along with marine applications where bilge pumps or emergency circuits need isolation control separate from primary systems. Designed for Australian marine and off-road environments where battery drain during storage periods shortens battery lifespan and creates starting failures. The master switch eliminates parasitic draw from alarm systems, stereos, GPS units and other accessories that slowly discharge batteries over weeks or months of storage. Contour mounting style integrates flush with console or bulkhead surfaces for clean installation without protruding handles that snag clothing or create injury hazards in confined spaces. Key Specifications Pole configuration: 3-pole (triple circuit isolation) Mounting style: Contour mount (flush installation) Application: Battery isolation and master disconnect Construction: Marine-grade materials (corrosion-resistant) Circuit capacity: Not specified Voltage rating: Not specified (likely 12V/24V marine systems) Features & Benefits 3-Pole Circuit Control: Isolates three separate circuits simultaneously, supporting dual battery systems with auxiliary circuit isolation or marine installations with emergency circuit separation. Provides more comprehensive shutdown control than single-pole switches that disconnect positive only. Contour Flush Mounting: Integrates flush with console, bulkhead or panel surfaces without protruding handles. Eliminates snag hazards in cockpits, vehicle cabins and tight passages where traditional rotary switch handles create injury risks and obstruct movement. Complete System Isolation: Disconnects all circuits to eliminate parasitic battery drain during storage periods. Prevents dead batteries from alarm systems, clock memories, ECU standby circuits and other accessories that slowly discharge batteries over weeks of non-use. Marine-Grade Construction: Corrosion-resistant materials withstand salt spray, bilge water exposure and coastal humidity that destroys standard automotive switches. Maintains reliable switching operation across seasons of marine or coastal vehicle use. Emergency Shutdown Capability: Provides rapid, complete electrical system isolation during emergencies including electrical fires, water ingress or collision scenarios. Single switch operation disconnects all circuits faster than individual component shutdown procedures. Dual Battery System Integration: Three poles support starter battery positive/negative isolation plus auxiliary battery circuit control in dual battery installations. Allows selective system shutdown configurations in complex electrical architectures. Technical Specs Model: SF50634 Pole configuration: 3-pole Mounting type: Contour mount (flush installation) Switch type: Battery master switch/isolator Compatible With / Goes Well With Marine electrical systems (single and dual battery configurations) 4WD dual battery systems requiring complete isolation Caravan and motorhome battery banks Boat battery systems with emergency circuit separation Marine engine rooms and helm console installations Vehicle storage and maintenance electrical control Emergency shutdown systems Parasitic draw elimination in stored vehicles and vessels Caution: Verify current rating, voltage compatibility and mounting dimensions before purchase. Insufficient current rating can cause switch failure and fire hazards. Ensure circuits controlled by this switch don't include safety-critical systems requiring continuous power (automatic bilge pumps, fire suppression). Frequently Asked Questions What does 3-pole mean for battery switching? Three-pole switches control three separate circuits simultaneously. In dual battery systems, this typically isolates starter positive, starter negative and auxiliary circuits with one switch operation. This provides more comprehensive control than 2-pole switches that may leave ground connections active. What is contour mounting? Contour mounting installs flush with panel surfaces without protruding handles. The switch mechanism sits behind the panel with only the operating control visible from the front, creating clean appearance and eliminating snag hazards compared to traditional rotary battery switches. Can this handle high-current starter motor loads? Current ratings are not specified. Battery master switches typically handle continuous accessory loads but may not be rated for sustained starter motor cranking current (200-400A). Verify current specifications match your application before purchase, especially for high-load circuits. Does this replace the battery isolator in dual battery systems? No, battery isolators manage charging between multiple batteries while running. Master switches provide manual ON/OFF control for storage, maintenance and emergencies. Both components serve different functions in dual battery systems. Can I leave this in the OFF position during boat storage? Yes, that's the primary function. The OFF position isolates all circuits to eliminate parasitic battery drain during storage periods, preventing dead batteries when returning to the vessel after weeks or months.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

BAINTECH BTAnderson-Single Surface Mount Single Anderson Plug Panel - 50A Heavy-Duty Mounting System for Solar, Dual Battery & Charging Applications Create professional Anderson plug connections with simplified installation using the BAINTECH BTAnderson-Single Surface Mount Single Anderson Plug Panel — a robust mounting solution engineered for reliable 50 amp electrical connectivity in demanding touring environments. This heavy-duty surface mount panel features a genuine 50 amp continuous-rated Anderson plug with premium UL silver-coated copper contacts for maximum conductivity and exceptional corrosion resistance — designed for straightforward surface mounting that installs directly onto flat panels, bulkheads, or walls without requiring complex cutouts or recessed installation — includes black UV-stabilized PVC housing with complete surface mounting plate for quick, secure installation on vehicle panels, caravan walls, camper trailer floors, or boat consoles — features Baintech's improved terminal design with tinned copper inserts specifically engineered to prevent short circuits and ensure reliable long-term connections — and delivers the robust construction quality that has made Baintech Australia's most trusted name in 12V electrical accessories. Perfect for retrofitting Anderson plug access points to existing panels, creating dedicated solar panel connections, establishing auxiliary battery charging stations, or installing electrical connection points where flush mounting isn't practical, the BAINTECH Surface Mount Single Anderson Panel provides professional-grade 50 amp connectivity with simplified installation that gets your electrical system operational quickly without panel modification or precision cutting. Product Overview The BAINTECH BTAnderson-Single Surface Mount Panel addresses a fundamental installation challenge faced by 4WD owners, caravan retrofitters, and boat operators — the need to add professional Anderson plug connection points to existing panels where cutting large openings for flush mounting isn't practical, desirable, or possible. This surface-mount design attaches directly to panel surfaces using the included mounting hardware, eliminating the precision cutting, panel modification, and potential mistakes associated with flush mounting systems. The complete panel assembly simply bolts onto any flat surface, providing robust 50 amp Anderson connectivity for high-power applications including solar panel connections, dual battery charging circuits, DC-DC charger outputs, inverter connections, and portable equipment power. The single Anderson plug configuration delivers clean, dedicated connectivity without the complexity of multi-function panels, making it ideal for straightforward applications where only Anderson plug capability is required. The 50 amp continuous rating with UL silver-coated copper contacts ensures superior conductivity and corrosion resistance for reliable performance in coastal salt air, tropical humidity, and dusty outback conditions, while maintaining consistent electrical performance through thousands of connection cycles. Australian adventurers, caravan retrofitters, marine installers, and DIY enthusiasts choose Baintech surface mount panels when they need professional electrical connectivity without modifying existing panels, want quick installation with minimal tools, or require flexible placement where flush mounting presents structural or waterproofing challenges. Key Features 50 Amp Continuous Rating with Silver-Coated Contacts Features a genuine 50 amp continuous-rated Anderson plug incorporating UL-certified silver-coated copper contacts delivering superior electrical conductivity and exceptional corrosion resistance. This professional-grade connection handles high-power applications including solar arrays up to 700+ watts, dual battery charging systems, DC-DC charger connections, and inverter circuits without contact overheating or voltage drop, maintaining reliable performance through thousands of connection cycles in harsh Australian touring conditions. Simplified Surface Mounting Installation Designed specifically for surface mounting directly onto flat panels, bulkheads, walls, or floors without requiring precision cutouts, recessed cavities, or complex panel modifications. The complete assembly with integrated mounting plate simply bolts to any flat surface using standard fasteners, dramatically reducing installation time and eliminating the risk of incorrectly sized or positioned cutouts that can ruin expensive panels or compromise structural integrity and waterproofing. Professional Black UV-Stabilized Housing Constructed from high-quality UV-stabilized PVC material that resists degradation, cracking, and color fading under continuous exposure to intense Australian sun. The professional black finish matches most vehicle and caravan interiors, while the robust construction maintains structural integrity through temperature extremes from -20°C to +70°C, sustained vibration on corrugated roads, and years of harsh touring conditions including coastal salt spray and outback dust storms. Complete PVC Surface Mounting Plate Included Comes with a complete PVC surface mounting plate providing secure, stable mounting on flat surfaces without additional hardware purchases. The integrated mounting plate distributes installation loads across a larger surface area preventing stress concentration that could crack thin panels, while providing proper spacing for cable entry and connection access behind the panel assembly for straightforward wiring without interference. Improved Anti-Short Circuit Terminal Design Features Baintech's enhanced terminal design with improved spacing, insulation barriers, and connection geometry specifically engineered to prevent accidental short circuits during installation and operation. This safety-focused design eliminates dangerous failure modes where loose terminal screws, wayward wire strands, or improper cable routing creates shorts that can damage batteries, destroy sensitive electronics, or start electrical fires in confined vehicle spaces. Quality Tinned Copper Terminal Inserts Incorporates tinned copper wire terminal inserts accepting heavy-gauge automotive cable (typically 8-10mm² for 50A applications) required for high-current Anderson plug circuits. The tinned copper construction resists corrosion far superior to bare copper terminals, maintains secure screw-clamp connection pressure without cold flow, and provides reliable long-term electrical connections that won't develop high-resistance joints requiring periodic maintenance tightening. Heavy-Duty Construction for Demanding Use Built with reinforced end plate design, strong mounting platform, and durable contact materials designed specifically for continuous heavy-duty use in demanding Australian touring environments. The robust construction withstands thousands of Anderson plug connection and disconnection cycles without contact degradation, housing cracks, or mechanical failures, ensuring reliable performance through decades of outback travel, beach adventures, and off-road expeditions. Retrofit-Friendly Design for Existing Installations Ideal for retrofitting Anderson plug capability to existing caravans, camper trailers, boats, or 4WDs where cutting panels for flush mounting would compromise waterproofing, structural strength, or factory warranties. The surface-mount approach preserves original panels while adding essential electrical functionality, making it perfect for upgrading older vehicles or adding auxiliary power points without permanent panel modifications that can't be reversed. Versatile Application for Multiple Uses Suitable for diverse applications including dedicated solar panel input connections, auxiliary battery charging points, DC-DC charger outputs, inverter power connections, portable equipment power access, or any scenario requiring robust 50 amp Anderson plug connectivity. The clean single-function design provides focused capability without unnecessary complexity, making it ideal for straightforward electrical installations requiring only Anderson plug access. Part of Australia's Largest Socket Range Represents one component in Baintech's comprehensive socket range — Australia's most extensive selection of 12V electrical mounting solutions. This broad product ecosystem ensures you can source matching panels, accessories, and components from a single manufacturer with consistent quality standards, compatible designs, and coordinated aesthetics across your entire electrical installation project, simplifying multi-component installations. Technical Specifications Specification Details Part Number BTAnderson-Single Current Rating 50 Amps Continuous Plug Type Anderson SB50 Style (Industry Standard) Contact Material UL Silver-Coated Copper Housing Material UV-Stabilized PVC Color Black Mounting Style Surface Mount (Complete with Mounting Plate) Mounting Hardware Included (Bolts to Flat Surfaces) Panel Modification Required None (Surface Mounts to Existing Panels) Terminal Type Screw Clamp - Tinned Copper Wire Inserts Wire Gauge Capacity 6-10mm² (Approximately 10-7 AWG) Operating Temperature -20°C to +70°C UV Protection UV-Stabilized for Australian Conditions Safety Features Improved Anti-Short Terminal Design Vibration Resistance Heavy-Duty Off-Road Rated Cable Entry Rear Access via Mounting Plate Panel Thickness Accommodation 3-12mm (Typical Vehicle/Caravan Panels) Suitable Applications 4WD, Caravan, Motorhome, Camper Trailer, Marine - Solar, Dual Battery & Charging Connections Frequently Asked Questions What's the main advantage of surface mounting versus flush mounting? Surface mounting requires no panel cutting or modification — you simply bolt the complete assembly to any flat surface, making installation faster, easier, and completely reversible. This is ideal for retrofitting Anderson plug access to existing vehicles without compromising panels, for rental vehicles or caravans where permanent modifications aren't desired, or for installations where cutting precise openings is difficult or risky. Flush mounting provides a more integrated appearance but requires precise cutting and irreversible panel modification. Can I use this for my 350W solar blanket connection? Yes, a 350 watt solar blanket produces approximately 16-18 amps maximum current, which is well within the 50 amp continuous rating of this Anderson plug panel. This makes it an ideal permanent mounting solution for solar input connections on caravans, camper trailers, or 4WD auxiliary battery systems, providing a secure, weather-resistant connection point that eliminates cable clutter and temporary connections prone to corrosion and failure. How thick can the mounting surface be for proper installation? The surface mount design accommodates typical vehicle and caravan panel thicknesses from 3mm to 12mm, with cables entering from behind the mounting surface through appropriate cable entry points. For thicker panels or unusual mounting scenarios, verify that sufficient space exists behind the mounting surface for cable routing, terminal connections, and proper bend radius on heavy-gauge Anderson plug wiring to prevent cable strain and connection stress. Can I mount this on the exterior of my vehicle or does it need interior mounting? While the UV-stabilized housing withstands outdoor conditions, this panel is designed primarily for interior or protected mounting locations such as under bullbars, in storage compartments, behind protective panels, or in covered areas. The Anderson plug is weather-resistant when connected but should be protected from direct heavy rain, submersion, or pressure washing when unmated. For fully exposed exterior mounting, consider additional weather protection or mounting in locations sheltered from direct water exposure. What wire size do I need for 50 amp applications? For 50 amp continuous applications, use minimum 10mm² (7 B&S) automotive cable for runs under 3 meters, or 13.5mm² (6 B&S) for longer cable runs to minimize voltage drop. The panel's terminal blocks accept wire sizes from approximately 6mm² to 10mm². Always ensure your Anderson plug circuit has appropriate fusing (typically 50-60 amp) based on your wire gauge and intended application to prevent overheating and electrical fires.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

BAINTECH BTAnderson-Dual Surface Mount Dual Anderson Plug Panel - Twin 50A Heavy-Duty Mounting System for Multiple Solar, Battery & Charging Circuits Maximize electrical connectivity with the BAINTECH BTAnderson-Dual Surface Mount Dual Anderson Plug Panel — a versatile twin-socket mounting solution engineered for reliable dual 50 amp electrical connections in demanding touring environments. This professional-grade surface mount panel features two genuine 50 amp continuous-rated Anderson plugs with premium UL silver-coated copper contacts for maximum conductivity and exceptional corrosion resistance — designed for straightforward surface mounting that installs directly onto flat panels, bulkheads, or walls without requiring complex cutouts or recessed installation — includes black UV-stabilized PVC housing with complete surface mounting plate for quick, secure installation on vehicle panels, caravan walls, camper trailer floors, or boat consoles — features Baintech's improved terminal design with tinned copper inserts specifically engineered to prevent short circuits and ensure reliable long-term connections — and delivers the robust construction quality trusted by thousands of Australian tourers and marine operators. Perfect for creating dedicated connection points for multiple solar panels, separating input and output circuits, establishing dual battery charging stations, or managing independent electrical systems, the BAINTECH Dual Anderson Panel provides professional-grade twin 50 amp connectivity with simplified installation that eliminates panel modification while maintaining complete circuit independence. Product Overview The BAINTECH BTAnderson-Dual Surface Mount Panel represents the ideal solution for Australian tourers and marine operators who need multiple Anderson plug connection points in a single compact mounting location. This dual-socket configuration addresses common scenarios where separate circuits require dedicated Anderson plug connectivity — such as managing both fixed solar panel input and portable solar blanket connections, separating auxiliary battery charging from inverter supply circuits, or providing independent power access for different electrical systems within the same vehicle or caravan. By consolidating two Anderson plugs into a single panel assembly, you eliminate the need for multiple separate panels consuming valuable mounting space and creating cluttered installations with tangled cables. The surface-mount design revolutionizes retrofit installations, allowing professional electrical connectivity to be added to existing caravans, camper trailers, boats, or 4WDs without cutting panels, compromising waterproofing, or risking expensive installation mistakes. Each Anderson plug maintains independent 50 amp continuous rating with UL silver-coated copper contacts ensuring superior conductivity and corrosion resistance in harsh Australian conditions. Australian adventurers, caravan retrofitters, solar system installers, and marine operators choose the dual Anderson panel when they need multiple high-current connection points consolidated into one professional mounting solution, want quick installation without panel modification, or require circuit separation for safety and functionality while minimizing dashboard or panel space consumption. Key Features Dual 50 Amp Anderson Plugs for Multiple Circuits Features two independent 50 amp continuous-rated Anderson plugs, each incorporating UL-certified silver-coated copper contacts delivering superior electrical conductivity and exceptional corrosion resistance. This dual-socket configuration enables simultaneous connection of multiple high-power circuits including separate solar panel inputs, independent battery charging circuits, dedicated inverter connections, or isolated electrical systems — each maintaining full 50 amp capacity without shared current limitations or circuit interaction. Independent Circuit Management and Separation Provides complete electrical isolation between both Anderson plugs, allowing safe operation of independent circuits without interaction, shared loads, or interference. This circuit separation is essential for managing different voltage sources, separating charging inputs from power outputs, isolating solar panel connections from battery circuits, or maintaining independent electrical systems within the same vehicle — all while consolidating connection points into one space-efficient panel. Simplified Surface Mounting Installation Designed specifically for surface mounting directly onto flat panels, bulkheads, walls, or floors without requiring precision cutouts, recessed cavities, or complex panel modifications. The complete assembly with integrated mounting plate simply bolts to any flat surface using standard fasteners, dramatically reducing installation time and eliminating risks associated with incorrectly sized cutouts that can ruin expensive panels or compromise structural integrity and waterproofing in caravans and boats. Space-Efficient Dual-Socket Design Consolidates two 50 amp Anderson plug connection points into a single compact panel assembly, maximizing electrical connectivity while minimizing the mounting space consumed on installation surfaces. This intelligent integration is particularly valuable when retrofitting multiple connection points to existing caravans, camper trailers, or boats where adding two separate panels would create cluttered, unprofessional appearances or exhaust available mounting space on crowded panels and bulkheads. Professional Black UV-Stabilized Housing Constructed from high-quality UV-stabilized PVC material that resists degradation, cracking, and color fading under continuous exposure to intense Australian sun. The professional black finish matches most vehicle and caravan interiors, while the robust construction maintains structural integrity through temperature extremes from -20°C to +70°C, sustained vibration on corrugated roads, and years of harsh touring conditions including coastal salt spray and outback dust storms. Complete PVC Surface Mounting Plate Included Comes with a complete PVC surface mounting plate providing secure, stable mounting on flat surfaces without additional hardware purchases. The integrated mounting plate distributes installation loads across a larger surface area preventing stress concentration on thin panels, while providing proper spacing for cable entry and rear-access terminal connections behind the panel assembly for straightforward wiring without cable interference or routing conflicts. Improved Anti-Short Circuit Terminal Design Features Baintech's enhanced terminal design with improved spacing, insulation barriers, and connection geometry specifically engineered to prevent accidental short circuits during installation and operation. This safety-focused design eliminates dangerous failure modes where loose terminal screws, wayward wire strands, or improper cable routing creates shorts that can damage batteries, destroy sensitive electronics, or start electrical fires — critical when managing multiple high-current circuits in confined spaces. Quality Tinned Copper Terminal Inserts Incorporates tinned copper wire terminal inserts on both Anderson plug circuits accepting heavy-gauge automotive cable (typically 8-10mm² for 50A applications) required for high-current connections. The tinned copper construction resists corrosion far superior to bare copper terminals, maintains secure screw-clamp connection pressure without cold flow, and provides reliable long-term electrical connections that won't develop high-resistance joints requiring periodic maintenance. Heavy-Duty Construction for Demanding Use Built with reinforced end plate design, strong mounting platform, and durable contact materials designed specifically for continuous heavy-duty use in demanding Australian touring environments. The robust construction withstands thousands of Anderson plug connection and disconnection cycles across both sockets without contact degradation, housing cracks, or mechanical failures, ensuring reliable performance through decades of outback travel and marine adventures. Versatile Multi-Circuit Applications Ideal for diverse dual-circuit scenarios including fixed solar and portable solar connections, battery input and inverter output separation, dual battery system management, independent accessory circuits, backup power connections, or any application requiring two separate 50 amp Anderson plug connections within close proximity. The clean dual-function design provides focused capability with complete circuit independence for safe, professional electrical installations. Technical Specifications Specification Details Part Number BTAnderson-Dual Number of Anderson Plugs 2 (Independent Circuits) Current Rating Per Plug 50 Amps Continuous Total Potential Current 100 Amps (Across Both Circuits) Plug Type Anderson SB50 Style (Industry Standard) Contact Material UL Silver-Coated Copper Circuit Isolation Independent (No Circuit Interaction) Housing Material UV-Stabilized PVC Color Black Mounting Style Surface Mount (Complete with Mounting Plate) Mounting Hardware Included (Bolts to Flat Surfaces) Panel Modification Required None (Surface Mounts to Existing Panels) Terminal Type Screw Clamp - Tinned Copper Wire Inserts Wire Gauge Capacity 6-10mm² per Circuit (Approximately 10-7 AWG) Operating Temperature -20°C to +70°C UV Protection UV-Stabilized for Australian Conditions Safety Features Improved Anti-Short Terminal Design Vibration Resistance Heavy-Duty Off-Road Rated Cable Entry Rear Access via Mounting Plate Panel Thickness Accommodation 3-12mm (Typical Vehicle/Caravan Panels) Suitable Applications 4WD, Caravan, Motorhome, Camper Trailer, Marine - Multiple Solar, Battery & Charging Circuits Frequently Asked Questions Can I use both Anderson plugs simultaneously without overloading the panel? Yes, each Anderson plug operates as an independent 50 amp circuit with complete electrical isolation. You can safely use both plugs simultaneously at their full 50 amp capacity (100 amps total across both circuits), provided each individual circuit is properly fused and wired appropriately for its intended load. The panel itself has no shared current limitations — each Anderson plug maintains its full 50 amp continuous rating regardless of whether the other plug is in use. What's a common use case for having two Anderson plugs in one panel? Common applications include having one Anderson plug for fixed roof-mounted solar panels and another for portable solar blanket connections, separating battery charging input from inverter power output to prevent back-feeding, managing dual battery systems with independent charging circuits, or providing separate connection points for different solar arrays. The dual configuration prevents cable swapping and maintains dedicated circuits for different electrical functions. Do both Anderson plugs share the same terminal connections or are they completely separate? Both Anderson plugs have completely independent terminal connections with no shared wiring or circuit interaction. Each plug requires its own separate cable connections on the rear terminals, allowing you to wire them to different batteries, different solar arrays, different loads, or completely independent electrical systems. This complete isolation ensures safe operation without voltage conflicts or unintended circuit interaction. Can I wire both Anderson plugs to the same battery for redundancy? Yes, you can wire both Anderson plugs to the same battery if desired, creating two independent connection points for the same electrical system. This is useful for having multiple solar panel connection options, providing both primary and backup charging inputs, or allowing different equipment to connect to the same power source without unplugging other devices. Ensure each circuit has appropriate individual fusing even when connected to the same battery. What wire gauge do I need for each circuit? Each 50 amp Anderson plug circuit requires minimum 10mm² (7 B&S) automotive cable for runs under 3 meters, or 13.5mm² (6 B&S) for longer cable runs to minimize voltage drop. Wire each circuit independently based on its actual current requirements — if one circuit only carries 20 amps, it can use lighter gauge wire appropriate for that load, while the other circuit might require full 50 amp cabling. Always provide appropriate fusing for each circuit based on wire gauge and load.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

BAINTECH BTSWITCH6-DA 6-Way Switch Panel with Dual Anderson, USB, Ciga Socket & Voltmeter - Complete Electrical Control Center for 4WD, Caravan & Marine Transform your electrical system control with the BAINTECH BTSWITCH6-DA 6-Way Switch Panel — a comprehensive all-in-one electrical command center combining six customizable rocker switches, dual Anderson plugs, USB charging, cigarette lighter socket, and digital voltmeter in one professional aluminum panel. This pre-wired switch panel features six bright blue LED rocker switches with 15 amp fuse protection for controlling lights, accessories, winches, pumps, and other 12V/24V equipment — includes dual Anderson plug connections for solar panel input, battery charging, or high-current accessory circuits — integrates Ciga socket for traditional 12V accessories and dual USB ports for modern device charging — features digital voltmeter providing real-time battery voltage monitoring for charge state assessment — and delivers IP68 waterproof rating ensuring reliable operation in harsh marine, off-road, and weather-exposed environments. Built from durable anodized aluminum with professional 180mm x 110mm dimensions and complete with customizable indicator labels for personalized switch identification, the BAINTECH 6-Way Switch Panel eliminates the complexity of separate components, tangled wiring, and multiple mounting locations by consolidating complete electrical control and connectivity into one space-efficient, professionally pre-wired panel that installs quickly in caravans, camper trailers, boats, 4WDs, or any application requiring centralized electrical system management. Product Overview The BAINTECH BTSWITCH6-DA represents the ultimate integrated electrical control solution for Australian tourers, marine operators, and off-road enthusiasts who demand professional-grade functionality without the installation complexity of separate components. This comprehensive panel consolidates six independently switched circuits, two Anderson plug connections, USB device charging, traditional Ciga socket power, and battery voltage monitoring into a single compact unit that replaces the clutter of multiple switches, scattered sockets, and flying leads with one organized command center. The pre-wired design with integrated 15 amp fuse holders eliminates hours of wiring work, reduces installation errors, and ensures professional circuit protection from the moment you connect power and accessories. Each of the six blue LED rocker switches features individual circuit control with illuminated status indication, allowing independent operation of accessories including camp lighting, water pumps, fridges, lighting bars, awning lights, and winches without affecting other circuits. The dual Anderson plug configuration provides versatile high-current connectivity for solar panel input and output circuits, battery charging connections, or portable equipment power access. The integrated digital voltmeter delivers continuous battery voltage monitoring without requiring separate gauge installation, enabling quick assessment of battery charge state and charging system performance. Australian caravan builders, 4WD retrofitters, boat owners, and camper trailer manufacturers choose the BAINTECH 6-Way Switch Panel for its combination of comprehensive functionality, professional construction quality, IP68 waterproof protection, and installation simplicity that transforms complex electrical projects into straightforward bolt-on installations. Key Features Six Customizable Blue LED Rocker Switches Features six independent rocker switches with bright blue LED illumination providing clear on/off status indication in all lighting conditions. Each switch includes customizable labeling using the supplied indicator labels (lights, winch, accessories, pump, etc.), allowing personalized identification matching your specific electrical system. The high-quality rocker switches deliver reliable tactile feedback, withstand millions of switching cycles, and handle 15 amp loads per circuit for controlling most 12V and 24V accessories without external relays. Pre-Wired with Integrated 15A Fuse Protection Comes completely pre-wired with professional-grade wiring harness and integrated 15 amp fuse holders protecting each switched circuit independently. This factory pre-wiring eliminates hours of complex installation work, ensures correct wire sizing and routing, prevents installation errors that cause electrical fires, and provides immediate circuit protection without requiring separate fuse panel installation. Simply connect main power input and attach accessories to the labeled output wires for quick commissioning. Dual Anderson Plug High-Current Connectivity Incorporates two independent 50 amp Anderson plug connections providing versatile high-current capability for solar panel input, battery charging circuits, DC-DC charger connections, inverter supply, or portable equipment power access. The dual Anderson configuration enables circuit separation (input/output) or multiple connection points without cable swapping, while maintaining the robust weather-resistant connection quality Anderson plugs are known for in demanding touring environments. Integrated Ciga Socket and Dual USB Charging Includes standard 12V cigarette lighter socket for traditional 12V accessories alongside dual USB charging ports for modern smartphones, tablets, cameras, and GPS devices. This triple-output configuration provides comprehensive power access for both legacy cigarette lighter accessories and modern USB devices within one integrated panel, eliminating the need for separate socket installations, USB adapter clutter, and multiple mounting locations. Digital Voltmeter Battery Monitoring Features built-in digital voltmeter providing continuous real-time battery voltage display accurate to 0.1V, enabling quick assessment of battery charge state, charging system performance, and load voltage under accessory operation. This integrated voltage monitoring eliminates the need for separate gauge installation while providing essential data for battery management decisions, charging optimization, and early detection of electrical system issues before they cause failures. IP68 Waterproof Protection Rating Engineered with IP68 waterproof rating ensuring reliable operation in harsh marine environments, wet weather conditions, spray-exposed mounting locations, and dusty off-road applications. The sealed construction protects internal electronics, switch contacts, and connections from water immersion up to 1 meter depth, salt spray, mud, dust, and moisture ingress that destroys unprotected electrical components in touring and marine applications. Durable Anodized Aluminum Construction Built from professional-grade anodized aluminum providing superior strength, corrosion resistance, heat dissipation, and electromagnetic shielding compared to plastic panels. The aluminum construction withstands physical impact, maintains structural integrity through temperature extremes from -20°C to +70°C, resists UV degradation, and provides excellent heat dissipation for sustained high-current operation without thermal derating or component overheating. Compact 180mm x 110mm Professional Dimensions Designed with space-efficient 180mm x 110mm footprint that installs easily in crowded dashboards, caravan control panels, boat helm consoles, or camper trailer walls without consuming excessive space. The compact dimensions combined with comprehensive functionality maximize electrical capability per square centimeter of panel real estate, ideal for modern vehicles where mounting space is limited but electrical system complexity continues increasing. 12V and 24V System Compatibility Works seamlessly with both 12 volt and 24 volt electrical systems, making it suitable for light vehicles, heavy trucks, buses, boats, and commercial applications. The universal voltage compatibility eliminates the need to specify different panels for different voltage systems, while the digital voltmeter automatically displays correct voltage regardless of system voltage without requiring configuration or calibration. Complete with Customizable Indicator Labels Includes comprehensive label set with common applications (lights, winch, accessories, pump, fridge, awning, etc.) enabling personalized switch identification matching your specific electrical system layout. The professional labels create clear switch identification preventing confusion and accidental activation, while the customizable approach ensures the panel adapts to your unique accessory configuration rather than forcing generic labeling that doesn't match your installation. Simple Four-Point Mounting Installation Features four corner mounting holes with 4mm diameter countersunk screw accommodation providing secure, low-profile installation on any flat surface. The countersunk design creates flush mounting that won't snag clothing or equipment, while the four-point mounting ensures secure retention through vibration, physical impact, and the demanding conditions of off-road travel without panel flex or mounting failure. Technical Specifications Specification Details Part Number BTSWITCH6-DA Number of Switches 6 Independent Rocker Switches Switch Current Rating 15 Amps per Circuit Switch Illumination Blue LED (On/Off Indication) Fuse Protection 15A Fuse Holders (Pre-Wired, Per Circuit) Anderson Plugs Dual 50A Anderson Connections Ciga Socket 1 x 12V Cigarette Lighter Socket USB Ports Dual USB-A Charging Ports Voltmeter Digital Display (0.1V Resolution) Voltage Compatibility 12V & 24V DC Systems Waterproof Rating IP68 (Water Immersion to 1 Meter) Panel Material Anodized Aluminum Panel Dimensions 180mm x 110mm Mounting Holes 4 x 4mm Diameter (Countersunk) Operating Temperature -20°C to +70°C Indicator Labels Included (Lights, Winch, Accessories, Custom) Pre-Wiring Complete Factory Harness with Fuse Holders Warranty 12 Months Manufacturer Warranty Suitable Applications 4WD, Caravan, Motorhome, Camper Trailer, Marine, Truck, Bus Frequently Asked Questions Can I control high-draw accessories like winches and fridges with the 15A switches? The 15 amp switch rating handles most 12V accessories directly including LED light bars, water pumps, interior lighting, and many fridges. However, electric winches, large inverters, and some high-draw accessories exceed 15 amps and require the switches to control external relays rather than direct load switching. For loads exceeding 15 amps, wire the switch to activate a heavy-duty relay that handles the actual high-current switching, protecting the panel switches from overload and extending their service life. Are the Anderson plugs and switches on separate circuits or do they share power? The six switches, Anderson plugs, Ciga socket, and USB ports all require main power input connection (typically to your battery positive and negative), but they operate as independent circuits. The switches control their individual accessory outputs, the Anderson plugs provide their own high-current connections, and the Ciga/USB outlets operate independently. Ensure your main power supply to the panel uses appropriately heavy gauge wire and fusing for the combined potential load. Is the panel waterproof enough for exterior mounting on a boat or exposed locations? The IP68 rating certifies protection against water immersion up to 1 meter depth, making it suitable for most marine applications and weather-exposed mounting. However, "waterproof" doesn't mean infinitely submersible — the rating covers temporary immersion and heavy spray rather than permanent underwater installation. For fully exposed exterior mounting, ensure cable entry points use proper IP68 glands, and consider additional weather protection for connections behind the panel to maintain long-term reliability. Can I add more switches or modify the panel configuration? The panel comes pre-wired with fixed configuration (6 switches, dual Anderson, Ciga, USB, voltmeter) and isn't designed for user modification. If you need different switch counts or configurations, Baintech offers various panel options. Attempting to modify the pre-wired harness or add components can compromise waterproofing, void warranty, and create electrical safety issues. Choose the panel configuration matching your needs rather than modifying this model. How do I identify which output wire controls which switch? The pre-wired harness includes labeled output wires corresponding to each switch position. During installation, refer to the included wiring diagram showing wire colors and switch positions, then connect your accessories to the appropriate labeled wires. Apply your chosen indicator labels to the panel switches matching the connected accessories, creating clear visual identification for daily use. Take photos during installation for future reference if accessories require disconnection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

BAINTECH BTSWITCH4-DA 4-Way Switch Panel with Dual Anderson, USB, Ciga Socket & Voltmeter - Complete Electrical Control Center for 4WD, Caravan & Marine Streamline your electrical system control with the BAINTECH BTSWITCH4-DA 4-Way Switch Panel — a comprehensive all-in-one electrical command center combining four customizable rocker switches, dual Anderson plugs, USB charging, cigarette lighter socket, and digital voltmeter in one professional aluminum panel. This pre-wired switch panel features four bright blue LED rocker switches with 15 amp fuse protection for controlling lights, accessories, pumps, and other 12V/24V equipment — includes dual Anderson plug connections for solar panel input, battery charging, or high-current accessory circuits — integrates Ciga socket for traditional 12V accessories and USB ports for modern device charging — features digital voltmeter providing real-time battery voltage monitoring for charge state assessment — and delivers IP68 waterproof rating ensuring reliable operation in harsh marine, off-road, and weather-exposed environments. Built from durable anodized aluminum with professional 131mm x 120mm compact dimensions and complete with customizable indicator labels for personalized switch identification, the BAINTECH 4-Way Switch Panel eliminates the complexity of separate components, tangled wiring, and multiple mounting locations by consolidating complete electrical control and connectivity into one space-efficient, professionally pre-wired panel that installs quickly in caravans, camper trailers, boats, 4WDs, or any application requiring centralized electrical system management. Product Overview The BAINTECH BTSWITCH4-DA represents the ideal compact electrical control solution for Australian tourers, marine operators, and off-road enthusiasts who need professional-grade functionality in a space-efficient package. This comprehensive panel consolidates four independently switched circuits, two Anderson plug connections, USB device charging, traditional Ciga socket power, and battery voltage monitoring into a single compact unit that replaces the clutter of multiple switches, scattered sockets, and flying leads with one organized command center. The pre-wired design with integrated 15 amp fuse holders eliminates hours of wiring work, reduces installation errors, and ensures professional circuit protection from the moment you connect power and accessories. Each of the four blue LED rocker switches features individual circuit control with illuminated status indication, allowing independent operation of accessories including camp lighting, water pumps, fridges, and lighting bars without affecting other circuits. The dual Anderson plug configuration provides versatile high-current connectivity for solar panel input and output circuits, battery charging connections, or portable equipment power access. The integrated digital voltmeter delivers continuous battery voltage monitoring without requiring separate gauge installation, enabling quick assessment of battery charge state and charging system performance. Australian caravan builders, 4WD retrofitters, boat owners, and camper trailer manufacturers choose the BAINTECH 4-Way Switch Panel for its combination of comprehensive functionality in a compact footprint, professional construction quality, IP68 waterproof protection, and installation simplicity that transforms complex electrical projects into straightforward bolt-on installations. Key Features Four Customizable Blue LED Rocker Switches Features four independent rocker switches with bright blue LED illumination providing clear on/off status indication in all lighting conditions. Each switch includes customizable labeling using the supplied indicator labels (lights, pump, accessories, fridge, etc.), allowing personalized identification matching your specific electrical system. The high-quality rocker switches deliver reliable tactile feedback, withstand millions of switching cycles, and handle 15 amp loads per circuit for controlling most 12V and 24V accessories without external relays. Pre-Wired with Integrated 15A Fuse Protection Comes completely pre-wired with professional-grade wiring harness and two integrated 15 amp fuse holders protecting switched circuits independently. This factory pre-wiring eliminates hours of complex installation work, ensures correct wire sizing and routing, prevents installation errors that cause electrical fires, and provides immediate circuit protection without requiring separate fuse panel installation. Simply connect main power input and attach accessories to the labeled output wires for quick commissioning. Dual Anderson Plug High-Current Connectivity Incorporates two independent 50 amp Anderson plug connections providing versatile high-current capability for solar panel input, battery charging circuits, DC-DC charger connections, inverter supply, or portable equipment power access. The dual Anderson configuration enables circuit separation (input/output) or multiple connection points without cable swapping, while maintaining the robust weather-resistant connection quality Anderson plugs are known for in demanding touring environments. Integrated Ciga Socket and USB Charging Includes standard 12V cigarette lighter socket for traditional 12V accessories alongside USB charging ports for modern smartphones, tablets, cameras, and GPS devices. This dual-output configuration provides comprehensive power access for both legacy cigarette lighter accessories and modern USB devices within one integrated panel, eliminating the need for separate socket installations, USB adapter clutter, and multiple mounting locations. Digital Voltmeter Battery Monitoring Features built-in digital voltmeter providing continuous real-time battery voltage display accurate to 0.1V, enabling quick assessment of battery charge state, charging system performance, and load voltage under accessory operation. This integrated voltage monitoring eliminates the need for separate gauge installation while providing essential data for battery management decisions, charging optimization, and early detection of electrical system issues before they cause failures. IP68 Waterproof Protection Rating Engineered with IP68 waterproof rating ensuring reliable operation in harsh marine environments, wet weather conditions, spray-exposed mounting locations, and dusty off-road applications. The sealed construction protects internal electronics, switch contacts, and connections from water immersion up to 1 meter depth, salt spray, mud, dust, and moisture ingress that destroys unprotected electrical components in touring and marine applications. Durable Anodized Aluminum Construction Built from professional-grade anodized aluminum providing superior strength, corrosion resistance, heat dissipation, and electromagnetic shielding compared to plastic panels. The aluminum construction withstands physical impact, maintains structural integrity through temperature extremes from -20°C to +70°C, resists UV degradation, and provides excellent heat dissipation for sustained high-current operation without thermal derating or component overheating. Compact 131mm x 120mm Space-Efficient Design Designed with space-efficient 131mm x 120mm footprint that installs easily in crowded dashboards, caravan control panels, boat helm consoles, or camper trailer walls without consuming excessive space. The compact dimensions combined with comprehensive functionality maximize electrical capability per square centimeter of panel real estate, ideal for applications where mounting space is limited but electrical system control requirements remain substantial. 12V and 24V System Compatibility Works seamlessly with both 12 volt and 24 volt electrical systems, making it suitable for light vehicles, heavy trucks, buses, boats, and commercial applications. The universal voltage compatibility eliminates the need to specify different panels for different voltage systems, while the digital voltmeter automatically displays correct voltage regardless of system voltage without requiring configuration or calibration.  Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AXIS BA102DM - Dual Mode Beep/Broadband Backup Alarm Industrial-grade dual mode backup alarm engineered for commercial vehicle and machinery reversing safety featuring selectable beep or broadband (squawk/white noise) sound modes allowing operators to choose appropriate warning type for specific work environments, wide 12-80V DC operating range supporting light commercial 12V systems, heavy commercial 24V systems, mining equipment 48V systems, and industrial machinery up to 80V without requiring voltage-specific models, 102dB sound output (±3dB) providing audible warning across construction sites, warehouses, mining operations, and industrial facilities even in high ambient noise environments, IP67 dust-tight and waterproof rating ensuring reliable operation in extreme weather, pressure washing, and harsh industrial conditions, nylon-epoxy encapsulated housing withstanding impacts, vibration, and chemical exposure, -40°C to +85°C operating temperature range suitable for Arctic winters and desert summers, 69H x 70W x 40D mm compact design fitting tight mounting locations, 102mm bracket mounting centres for secure installation, ideal for trucks, buses, commercial machinery, mining equipment, forklifts, agricultural vehicles, construction equipment, caravans, motorhomes, and any application requiring compliant reversing warning systems. Product Overview The AXIS BA102DM is a professional-grade dual mode backup alarm designed to enhance worker and pedestrian safety during vehicle and machinery reversing operations across industrial, commercial, and construction environments. The unique dual-mode functionality allows operators or fleet managers to select between traditional beep tone (1.2kHz frequency) ideal for general commercial applications, or broadband squawk/white noise ideal for residential areas, noise-sensitive environments, or locations where directional sound localization is critical for worker safety. Traditional beep alarms can blend into ambient noise or cause noise pollution complaints in residential areas, while broadband white noise provides easier sound source localization allowing pedestrians to quickly identify the reversing vehicle's direction and distance. The exceptional 12-80V operating voltage range eliminates the need for multiple alarm models across mixed fleets operating different electrical systems - the same alarm works on 12V light commercial vehicles, 24V heavy trucks and buses, 48V mining equipment, and industrial machinery up to 80V, simplifying fleet parts inventory and reducing procurement complexity. The 102dB sound output ensures audible warnings across noisy industrial environments including construction sites with operating machinery, mining operations with crushing equipment, and warehouses with forklifts and conveyor systems. The IP67 rating provides complete dust protection and waterproof performance during high-pressure washing, submersion during creek crossings, and continuous exposure to rain, mud, and industrial fluids. The nylon-epoxy encapsulated housing withstands impacts from loading docks, dropped materials, and vehicle collisions while resisting chemical degradation from fuels, oils, hydraulic fluids, and cleaning solvents commonly encountered in industrial operations. Important Notes: Installation Requires Electrical Knowledge: Proper wiring to reversing light circuit requires understanding of vehicle electrical systems. Professional installation recommended. Sound Level Regulations Vary: Check local regulations regarding backup alarm sound levels and types. Some jurisdictions mandate specific alarm types or sound levels. Beep vs Broadband Selection: Choose beep mode for traditional compliance, broadband mode for residential areas or enhanced directional localization. Mounting Location Critical: Position alarm with clear sound projection rearward. Obstructions reduce effective warning distance. Regular Testing Required: Test alarm functionality weekly. Failures compromise worker safety and may violate workplace safety regulations. Key Features Dual Mode Operation - Selectable beep or broadband (squawk/white noise) sound modes suit different environments and compliance requirements. 12-80V Universal Voltage - Exceptional voltage range works across 12V, 24V, 48V, and 80V systems without voltage-specific models. 102dB Sound Output - High volume (±3dB tolerance) ensures audible warning in noisy industrial environments. IP67 Waterproof Rating - Dust-tight and waterproof withstanding pressure washing, submersion, and extreme weather exposure. Nylon-Epoxy Housing - Encapsulated construction resists impacts, vibration, chemicals, fuels, oils, and industrial fluids. Extreme Temperature Range - Operates -40°C to +85°C suitable for Arctic cold and desert heat without performance degradation. Beep Mode (1.2kHz) - Traditional backup alarm tone for general commercial and industrial compliance. Broadband Mode - White noise/squawk provides enhanced directional localization reducing ambient noise pollution. Compact Design - 69H x 70W x 40D mm size fits tight mounting locations on trucks, machinery, and equipment. 102mm Bracket Mounting - Standard bracket centres allow secure installation with anti-vibration mounting. Low Current Draw - 250mA consumption minimizes electrical system load suitable for vehicles with extensive auxiliary equipment. 15W Power Rating - Efficient power usage while maintaining high sound output levels. Fleet Standardization - Single model suits entire mixed-voltage fleet reducing parts inventory complexity. Mining Equipment Compatible - 48V and 80V capability suits underground mining vehicles and heavy industrial machinery. Commercial Vehicle Ready - Meets backup alarm requirements for trucks, buses, coaches, and commercial fleets. Technical Specifications Specification Details Brand AXIS Model BA102DM SKU BA102DM Barcode 9321886016857 Product Type Dual Mode Backup Alarm Operating Voltage 12-80V DC Current Draw 250mA Power Rating 15W Sound Modes Beep or Broadband (White Noise/Squawk) Beep Frequency 1.2kHz Sound Level 102dB ±3dB Housing Material Nylon-Epoxy Encapsulated IP Rating IP67 (Dust-tight and Waterproof) Dimensions 69H x 70W x 40D mm Bracket Mounting Centres 102mm Operating Temperature -40°C to +85°C Chemical Resistance Resistant to Fuels, Oils, Hydraulic Fluids, Solvents Impact Resistance Encapsulated Housing Construction Vibration Resistance Industrial-Grade Construction Mounting Bracket Mount with Hardware Included Wiring Connect to Reversing Light Circuit Compliance Industrial Safety Standards Applications Trucks, Buses, Machinery, Mining Equipment, Forklifts, Construction Equipment Warranty Standard Manufacturer Warranty Weight Not specified Country of Origin Not specified Frequently Asked Questions Q: What's the difference between beep mode and broadband mode, and which should I use? A: Beep mode produces traditional 1.2kHz tone - the familiar "beep-beep-beep" sound most people associate with reversing vehicles. It's loud, penetrates ambient noise well, and meets standard compliance requirements. Broadband mode produces white noise or "squawk" sound that's easier for human ears to localize directionally - pedestrians can quickly determine which direction the reversing vehicle is coming from. Broadband is preferred in residential areas (less annoying than beeping), noise-sensitive environments, and situations where workers need precise directional awareness. Some jurisdictions mandate broadband for residential construction sites to reduce noise complaints. Choose beep for traditional industrial sites, broadband for residential areas or enhanced worker safety through better sound localization. Q: How do I wire this alarm to my vehicle or machinery? A: The alarm connects to your reversing light circuit so it activates automatically when reverse gear is selected. Locate your reversing light positive wire (usually found at the reversing light assembly or gearbox switch), connect the alarm's positive wire to this circuit, and connect the alarm's negative wire to vehicle chassis ground. When you select reverse gear, power flows to reversing lights AND backup alarm simultaneously. The 12-80V range means polarity and voltage compatibility aren't concerns for most applications. However, proper installation requires identifying correct reversing circuit wires and ensuring secure weatherproof connections. Professional installation is strongly recommended for liability reasons - improperly installed backup alarms may fail to operate when needed, creating serious safety and legal consequences. Q: Will this work on my 12V caravan or motorhome? A: Absolutely, the 12-80V range includes standard 12V systems. However, caravans and motorhomes typically reverse using the tow vehicle's reversing circuit, not an independent caravan reversing system. You'll need to tap into the tow vehicle's reversing light circuit at the trailer connector (usually pin 8 on 7-pin flat or 12-pin connectors) to provide trigger signal. Alternatively, install a reversing switch activated by the caravan's breakaway system or manual switch. For motorhomes with integrated chassis, installation is straightforward - wire to the motorhome's own reversing light circuit. Consider broadband mode for caravan parks and camping areas where beeping may disturb nearby campers during reversing maneuvers. Q: Is 102dB loud enough for construction sites and mining operations? A: Yes, 102dB is sufficient for most industrial environments including construction sites, warehouses, and open-pit mining operations. For reference, 102dB at 1 metre distance remains audible 30-50 metres away in typical industrial ambient noise (85-95dB). However, effectiveness depends on mounting location, obstructions, and ambient noise levels. In extremely loud environments (near crushing equipment, inside processing plants with 100+dB ambient), workers should rely on visual awareness and spotters rather than audible alarms alone. Some heavy mining equipment uses multiple alarms or higher-output models (110dB+) for extreme conditions. For standard reversing operations in typical industrial noise, 102dB meets regulatory requirements and provides adequate warning. Q: How do I switch between beep and broadband modes? A: Mode selection method depends on the specific model configuration - some BA102DM units have physical switches, others use jumper wire configurations, and some require reconnecting internal wires. Consult the installation manual included with your alarm for exact mode-switching instructions. Generally, mode selection is set during installation and not intended for frequent switching. Choose the appropriate mode for your primary operating environment during initial installation. If you regularly operate in both industrial and residential environments, consider installing two alarms with different modes, or select broadband as the more versatile option suitable for both environments while reducing noise pollution complaints. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-duty fuse protection for high-current 12V and 24V systems—built to last in the harshest Australian conditions. Product Overview The OEX ACX6514/50 is a professional-grade SF30 Midi inline fuse holder engineered for workshops, auto electricians, and fleet operators who demand reliable overcurrent protection in high-amperage applications. Designed for 1-32V DC systems, this single-circuit fuse holder handles loads up to 250A, making it ideal for dual battery setups, inverter installations, winch circuits, and heavy-duty automotive electrical systems. Built with corrosion-resistant stainless steel studs and rated for extreme temperatures from -40°C to +120°C, it's proven to withstand the heat, dust, and vibration of Australian outback conditions. This bulk 50-piece trade pack delivers exceptional value for installers working across multiple vehicles or building custom electrical distribution systems. Key Specifications Maximum current rating: 250A continuous at 1-32V DC Type: SF30 Midi fuse holder (inline, 1-way circuit) Stud material: Stainless steel for corrosion resistance Mounting centres: 30mm stud spacing Operating temperature range: -40°C to +120°C Pack quantity: 50 units per box Compatible with ACX6513 mounting bracket (sold separately) Warranty: 12 months manufacturer's warranty Features & Benefits 250A High-Current Capacity: Handles demanding loads like inverters, winches, and high-output alternators without voltage drop or overheating—essential for modern 4WD dual battery systems and commercial vehicle fitouts. Stainless Steel Construction: Unlike cheaper brass or plated terminals, stainless studs resist corrosion in coastal environments, under-bonnet heat, and dusty outback conditions, ensuring long-term reliability across Australia's varied climates. Extreme Temperature Rated: Proven performance from -40°C to +120°C means this holder won't crack in desert heat or fail in alpine cold, making it the choice for touring rigs and remote work vehicles that face temperature extremes. 30mm Mounting Centres: Standard SF30 format with precise 30mm spacing allows secure installation using the optional ACX6513 bracket or custom mounting solutions, giving installers flexibility in tight engine bays or battery boxes. Trade-Ready Bulk Pack: 50 units per box reduce per-unit costs for workshops, auto electricians, and fleet maintenance teams who install multiple systems—ideal for standardising protection across a vehicle fleet or keeping workshop stock levels high. Technical Specs Model: ACX6514/50 Fuse type compatibility: SF30 Midi fuses Rated voltage: 1-32V DC Maximum continuous current: 250A Stud material: Stainless steel Terminal configuration: 1-way (single circuit) Mounting hole spacing: 30mm centre-to-centre Operating temperature: -40°C to +120°C ambient Number of circuits: 1 Quantity per pack: 50 pieces Product group: Auto electrical accessories, fuses and circuit protection Warranty period: 12 months Frequently Asked Questions What size Midi fuse does this holder accept?This holder is designed for SF30 Midi fuses with 30mm mounting centres, commonly available in ratings from 30A to 250A. Can I mount this holder without the bracket?Yes, the stainless studs can be bolted directly to a suitable surface, though the ACX6513 bracket provides neater installation and strain relief. Is this suitable for 24V truck systems?Absolutely—the 1-32V rating covers both 12V passenger vehicles and 24V commercial/heavy vehicle electrical systems without derating. Will this handle starter motor or alternator circuits?Yes, the 250A continuous rating suits high-current alternator feeds, though starter circuits may require higher surge-rated protection depending on engine size. What's included in the 50-pack?You receive 50 individual fuse holders (fuses and mounting brackets sold separately), ideal for bulk installs or workshop inventory. Compatible With SF30 Midi fuses (30A–250A ratings) ACX6513 mounting bracket (recommended for secure installation) Dual battery systems and battery isolators High-output alternators (150A+ systems) DC-DC battery chargers Inverter installations (1000W–3000W+) Electric winch wiring (9000lb–18000lb winches) Solar panel charging systems Anderson plug installations Heavy-duty cable lugs and terminals 4WD auxiliary electrical systems Commercial vehicle electrical upgrades Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Professional-grade sealed rocker switch engineered for reliable automotive and marine 12V DC applications. The Narva 63100BL is a sealed SPST rocker switch designed for demanding automotive, marine, and off-road electrical systems. Rated at 20A @ 12V (10A @ 24V), this single-pole, single-throw switch delivers dependable on/off control for auxiliary lighting, accessories, and electrical circuits. The sealed construction protects internal contacts from moisture, dust, and vibration, making it ideal for harsh Australian conditions—from dusty outback tracks to coastal marine environments. With a compact 37.5mm x 21mm mounting footprint and push-on terminals for quick installation, the 63100BL suits workshop builds, 4WD fitouts, caravan upgrades, and trailer electrical systems. The non-illuminated black rocker maintains a clean, professional appearance on switch panels and dashboards. Key Specifications Contact rating: 20A @ 12V DC, 10A @ 24V DC Switch configuration: SPST (Single Pole, Single Throw) Switch action: Off/On (2 positions) Mounting dimensions: 37.5mm x 21mm panel cutout required Terminal type: Push-on spade connectors (2 terminals) Construction: Sealed rocker design for moisture and dust resistance Weight: 0.04 kg Switch illumination: Non-illuminated Colour: Black Warranty: 1 year manufacturer warranty Features & Benefits Sealed Construction for Harsh EnvironmentsThe sealed rocker design protects internal contacts from moisture ingress, dust, and vibration. Perfect for under-bonnet applications, exposed switch panels on bull bars, or marine installations where spray and humidity are constant challenges. 20A Current CapacityHandles substantial electrical loads including LED light bars, driving lights, winches, pumps, and cooling fans. The generous 20A @ 12V rating (10A @ 24V) provides headroom for demanding accessories without risk of contact overheating or failure. Quick Push-On TerminalsStandard push-on spade terminals allow fast, tool-free wire connections during installation. Ideal for workshop efficiency and field repairs where crimped spade connectors are the automotive standard. Compact Panel MountingThe 37.5mm x 21mm mounting aperture suits most aftermarket switch panels, dash blanks, and custom console builds. Compact footprint maximizes available panel space for multi-switch arrays in 4WDs, caravans, and work vehicles. Professional Non-Illuminated DesignBlack rocker provides a clean, understated appearance suitable for OEM-style integrations and professional fitouts. Non-illuminated design eliminates unwanted dashboard glow during night driving. Technical Specs Part Number: 63100BL Brand: Narva Switch Type: Rocker, sealed Poles: 1 (SPST) Positions: 2 (Off/On) Contact Rating: 20A @ 12V DC, 10A @ 24V DC Terminal Count: 2 Terminal Style: Push-on spade Mounting Cutout: 37.5mm x 21mm Illumination: None (non-illuminated) Lamp Colour: Not applicable Weight: 0.04 kg (40 grams) Warranty Period: 1 year Frequently Asked Questions What size hole do I need to cut for installation? You'll need a rectangular panel cutout measuring 37.5mm x 21mm. Use a stepped drill or router for clean edges in plastic or metal panels. Can this switch handle a 15A light bar on 12V? Yes, the 20A @ 12V rating provides adequate capacity for a 15A load with safe operational headroom. Always use appropriately rated fuse protection. Is this switch waterproof for marine use? The sealed construction resists moisture and dust ingress, suitable for splash-prone areas. For full submersion or constant spray, consider additional panel sealing with gaskets. What wire terminal size fits the push-on connectors? Standard 6.3mm (1/4 inch) push-on spade terminals are compatible. Use insulated or non-insulated crimp terminals rated for 20A current. Does the switch illuminate when turned on? No, the 63100BL is non-illuminated. For backlit switches with LED indication, refer to Narva's illuminated rocker switch range. Compatible With / Goes Well With Typical Applications: Auxiliary driving lights and light bars (12V/24V systems) Electric winches and recovery equipment Caravan interior lighting circuits Marine bilge pumps and navigation lights 4WD accessory circuits (spotlights, beacons, UHF radios) Workshop and trailer electrical systems Cooling fans and air compressors Pairs Well With: Automotive blade fuse holders (20A or 25A fuses) 6.3mm crimp-on spade terminals (insulated or non-insulated) Switch panel blanking plates and custom fascias 14–16 AWG automotive cable for 20A circuits Narva relay harnesses for high-current accessories Note: Always install appropriate fuse protection rated at or below 20A for 12V circuits. Verify terminal crimps are secure and heat-shrink protected in exposed locations. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Bulk-pack red female blade terminals for reliable automotive connections Product Overview The OEX ACX3016 insulated female blade crimp terminals deliver workshop-grade electrical connections for automotive, marine, and 12V accessory wiring. Supplied in a 100-piece pack, these 6.3mm blade terminals handle the heavy-duty wire sizes common in vehicle electrical systems—perfect for workshops doing regular wiring jobs, auto electricians building custom looms, or serious DIYers tackling caravan fitouts and 4WD accessory installs. Each terminal features a double crimp design with separate crimps for the conductor and insulation, ensuring both electrical integrity and mechanical strain relief. The red vinyl insulation instantly identifies these as 2.5-3.0mm² wire terminals, eliminating confusion when you're working with multiple wire gauges in complex harnesses. Tin-plated copper construction resists corrosion while maintaining excellent conductivity—critical when terminals are hidden behind panels or exposed to underbonnet heat and vibration. The 6.3 x 0.8mm blade receptacle matches the standard automotive blade terminal size used across countless switches, relays, fuse holders, and electrical accessories. Whether you're wiring up aftermarket lights, building a custom switch panel, installing auxiliary battery systems, or maintaining fleet vehicles where terminals regularly need replacement, this 100-pack keeps you stocked for the long haul without constantly reordering singles. Key Specifications Terminal type: Insulated female blade (receptacle) Tab compatibility: 6.3 x 0.8mm male blade terminals Wire size range: 2.5-3.0mm² conductor Insulation colour: Red (2.5-3.0mm² standard colour code) Insulation material: Vinyl (PVC) Terminal material: Tin-plated copper Crimp style: Double crimp (conductor + insulation) Pack quantity: 100 pieces Unit weight: 0.08kg (80g for 100-pack) Warranty: One year manufacturer warranty Features & Benefits Double Crimp Design – Separate crimps for the wire conductor and insulation jacket mean proper strain relief on both elements. The conductor crimp ensures low-resistance electrical connection, while the insulation crimp prevents wire flex fatigue at the terminal entry point—particularly important in high-vibration automotive environments where single-crimp terminals can fail. Tin-Plated Copper Construction – Copper provides excellent conductivity with low voltage drop, while the tin plating protects against oxidation and corrosion. In underbonnet installations where terminals face heat cycles, moisture from humidity, and road salt spray, tin plating significantly extends terminal life compared to bare copper. 6.3mm Blade Standard – This terminal size matches the most common automotive blade terminal specification used across Australian and international vehicle electrical systems. Compatible with standard switches, relays, fuse blocks, and countless aftermarket accessories, giving you versatility across diverse wiring jobs. Colour-Coded Red Insulation – The red vinyl sleeve instantly identifies these as 2.5-3.0mm² wire terminals, following industry-standard colour coding. When you're troubleshooting a loom six months after installation or another electrician needs to work on your wiring, that colour-coding prevents dangerous mismatches between terminal and wire size. Workshop-Friendly 100 Pack – Instead of running out mid-job or paying retail markup on blister packs, this bulk quantity suits workshops, mobile auto electricians, and regular installers. Keeps your crimp terminal drawer stocked for months of wiring work without tying up excessive capital in inventory. Vinyl Insulation – PVC insulation handles automotive temperature ranges while providing adequate dielectric strength for 12V and 24V systems. The vinyl sleeve protects against shorts where terminals run close to chassis or mount brackets, and provides safe handling during installation. Technical Specs Terminal designation: Insulated female blade (receptacle style) Male blade compatibility: 6.3 x 0.8mm tab dimensions Wire conductor range: 2.5mm² to 3.0mm² cross-sectional area Insulation sleeve colour: Red (industry standard for 2.5-3.0mm²) Insulation material: Vinyl (PVC) compound Terminal conductor material: Tin-plated copper alloy Crimp configuration: Double crimp (wire barrel + insulation barrel) Terminal barrel internal dimensions: Sized for 2.5-3.0mm² stranded wire Pack configuration: 100 terminals per pack Total pack weight: 0.08kg (80 grams) Quality standard: Manufactured to automotive crimp terminal specifications Warranty coverage: 1 year from purchase date Compatible With / Goes Well With 6.3mm male blade crimp terminals (matching wire size) Automotive switches with 6.3mm blade terminals Standard blade-type fuse holders and fuse blocks Automotive relays with 6.3mm spade connections Ratcheting crimp tools with insulated terminal dies 2.5mm² and 3.0mm² automotive cable (various colours) Wire strippers calibrated for 2.5-3.0mm² cable Heat shrink tubing for additional connection protection Dielectric grease for corrosion prevention Cable ties and loom tape for harness finishing Note: Always match terminal wire size to actual cable cross-section. Using oversized or undersized terminals creates unreliable crimps prone to high resistance or mechanical failure. Frequently Asked Questions What crimping tool do I need for these terminals? Use a ratcheting crimp tool with interchangeable dies sized for insulated terminals, typically marked for red/2.5-3.0mm² wire. Proper tools ensure both the conductor and insulation crimps close correctly—avoid using pliers which damage terminals and create unreliable connections. Can I use these on 12V LED light bar wiring?  Yes, provided your wire gauge is 2.5-3.0mm² and the light bar connections use 6.3mm male blade terminals. Verify current draw stays within wire and terminal ratings—these terminals suit most auxiliary lighting applications under 20A continuous load. Will these fit standard automotive fuse holders? Most automotive blade-style fuse holders use 6.3mm terminals, so yes—these terminals connect directly to standard fuse blocks, inline fuse holders, and distribution panels using that terminal size. Always verify terminal dimensions on your specific fuse holder. Are these suitable for outdoor or underbonnet installation? Yes, tin-plated copper resists corrosion better than bare copper, and vinyl insulation handles automotive temperature ranges. For harsh environments, apply dielectric grease to the connection and use heatshrink over the terminal for additional protection against moisture ingress. Can I connect 2.0mm² wire if I don't have yellow terminals? While the barrel will physically accept 2.0mm² wire, proper crimping requires matched terminal-to-wire sizing for reliable electrical and mechanical connection. Use correctly sized terminals (yellow/2.0mm²) for 2.0mm² wire rather than oversizing—improper matches create high-resistance connections. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less