OEX ACX0561/100 Australian Made 2mm Single Core Automotive Cable Brown 100m Roll OFHC Copper V90 The OEX ACX0561/100 is a 2mm single core automotive cable in brown, supplied on a 100m roll. Manufactured in Australia from 99.99% oxygen free high conductivity (OFHC) copper, it is designed for reliable performance across a wide range of 12V and 24V automotive, marine and caravan wiring applications. Rated at 5A continuous at 30°C with V90 rated PVC insulation. RoHS compliant and CAN bus compatible. Product overview The ACX0561/100 is the 100m roll version of the ACX0561 brown 2mm single core cable, suited to workshops and trade installers who regularly use brown cable in complex multi-wire harness builds and trailer wiring looms, and prefer the full 100m trade-length supply over the 50m roll. The conductor specification and insulation rating are identical across both roll lengths. Brown provides an additional circuit colour for installations where red, white, blue and green are already allocated, supporting full colour differentiation across all circuits in complex wiring builds. In Australian automotive wiring, the "2mm" designation refers to the overall cable diameter. The conductor cross-section is 0.5mm² (20AWG) with 18 strands of 0.18mm copper, providing the flexibility needed for routing through tight spaces and around bends. The 99.99% OFHC copper conductor minimises resistance and signal loss, and the UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. Ampacity decreases as ambient temperature rises, so underbonnet applications in high-heat environments should be assessed accordingly. Features and benefits 99.99% OFHC copper conductor: Oxygen free high conductivity copper minimises resistance and signal loss across the cable run, maintaining reliable electrical performance in automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. Brown colour coding: Brown provides an additional circuit colour for complex multi-wire harness builds and trailer wiring looms where red, white, blue and green are already allocated, supporting full colour differentiation across all circuits. UV stabilised PVC insulation: Resists degradation in sun-exposed and underbonnet environments, extending the service life of the cable in outdoor-exposed installation positions. V90 temperature rating: PVC insulation rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 5A rated at 30°C: Suited to lighting, signal wiring and low-current accessory circuits in 12V and 24V systems. 18-strand construction: The 18-strand conductor provides flexibility and resistance to fatigue during installation and in service, well suited to routing through tight spaces and around bends. RoHS compliant: Meets hazardous substance restrictions. CAN bus compatible: Meets the signal integrity requirements for use in modern vehicle communication network environments. 100m roll: Trade-length supply for workshops and fleet installers covering multiple jobs from a single roll. Technical specs Specification Detail SKU ACX0561/100 Brand OEX Cable Type Single Core Automotive Industry Known Size 2mm Conductor Cross Section 0.5mm² Gauge 20AWG Conductor Strands 18 Strand Diameter 0.18mm Conductor Material 99.99% OFHC Copper Amp Rating 5A at 30°C Voltage Rating Up to 100V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Cable Colour Brown Length 100m Weight 0.5kg Compliance RoHS Warranty One year Sold As 100m roll Frequently asked questions What does "2mm cable" mean is that the conductor size or the overall diameter? In Australian automotive wiring, "2mm" refers to the overall cable diameter, not the conductor cross-section. This cable has a conductor cross-section of 0.5mm² (20AWG) with 18 strands of 0.18mm copper. The 2mm designation is the industry-standard size reference used by auto electricians and suppliers across Australia. What is the difference between the ACX0561 and the ACX0561/100? Both are the same 2mm brown OFHC copper single core cable with identical conductor and insulation specifications. The ACX0561 is supplied on a 50m roll and the ACX0561/100 is supplied on a 100m roll. Select based on the quantity required for your installation workload. What is the amp rating for this cable? This cable is rated at 5A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. What does V90 mean? V90 is the Australian cable insulation classification indicating the PVC insulation is rated for continuous operation at up to 90°C. It is the standard specification for automotive-grade PVC insulated cable in Australia and confirms suitability for underbonnet and outdoor-exposed installation positions. Is this cable suitable for CAN bus wiring? Yes. OEX notes this cable as CAN bus compatible, meaning it meets the signal integrity requirements for use in modern vehicle communication network environments. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0804L Australian Made 4mm Twin Core Figure 8 Automotive Cable Red and Red Black Trace 100m Roll OFHC Copper 15A V90 The OEX ACX0804L is a 4mm twin core figure 8 automotive cable supplied on a 100m roll. Two 1.84mm² OFHC copper conductors are bonded together in a figure 8 profile one red and one red with a black trace allowing polarity to be identified at a glance without needing to mark or tape individual wires. Each conductor is rated at 15A at 30°C with 26-strand OFHC copper construction. The PVC insulation is UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Covered by a one year warranty. Product overview A figure 8 cable bonds two insulated conductors side by side in a profile that resembles the number 8 in cross-section. The two conductors travel together along the run and can be separated by splitting them apart at the ends for connection, keeping the positive and negative wires neatly paired without the need to manage two separate single-core cables. The ACX0804L uses red for the positive conductor and red with a black trace for the negative or return conductor, providing clear polarity identification without additional marking, tape or sleeving. At 1.84mm² (15AWG) per conductor with a 15A continuous rating, the ACX0804L suits trailer and caravan lighting circuits, auxiliary and driving light wiring, accessory power and return feeds and general two-wire circuits drawing up to 15A per conductor. The 26-strand construction provides flexibility for routing through tight spaces, and the UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for outdoor-exposed and underbonnet installations. The 100m roll suits workshops and trade installers working across multiple jobs. Features and benefits Twin core figure 8 construction: Two bonded conductors in one cable for clean, tidy two-wire installations. Conductors travel together along the run and split apart at the ends for termination. Red and red with black trace for polarity identification: One conductor is solid red (positive) and the other is red with a black trace stripe (negative or return), providing clear visual polarity identification without additional marking or tape. OFHC copper conductors: Oxygen free high conductivity copper minimises resistance across the cable run, maintaining reliable electrical performance in automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. 15A rated at 30°C per conductor: Each conductor handles up to 15A at 30°C ambient, suited to trailer lighting, auxiliary lighting, accessory wiring and general two-wire circuits. Current carrying capacity reduces at higher ambient temperatures. UV stabilised PVC insulation: Resists degradation in sun-exposed and underbonnet environments. V90 temperature rating (90°C): Insulation rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 26-strand construction: The 26-strand conductor provides flexibility and resistance to fatigue during installation and in service, suited to routing through tight spaces and around bends. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 100m roll: Trade-length supply for workshops and fleet installers covering multiple jobs from a single roll. Technical specs Specification Detail SKU ACX0804L Brand OEX Cable Type Twin Core, Figure 8 Industry Known Size 4mm Conductor Cross Section 1.84mm² per conductor Gauge 15AWG Conductor Strands 26 Strand Diameter 0.3mm Conductor Material OFHC Copper Amp Rating 15A at 30°C per conductor Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Conductor Colours Red and red with black trace Length 100m Weight 4.3kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 100m roll Frequently asked questions What is a figure 8 twin core cable? A figure 8 cable bonds two insulated conductors side by side in a profile that resembles the number 8 in cross-section. The two conductors can be separated by splitting them apart at the ends for connection. It keeps positive and negative wires together along the run for a neater installation compared to running two separate single-core cables. How do I tell which conductor is positive and which is negative? One conductor is solid red (positive) and the other is red with a black trace stripe (negative or return). The trace stripe provides a clear visual identifier along the entire cable run without needing to mark or tape the wire at installation. What is the amp rating per conductor? Each conductor is rated at 15A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. What does AS/NZS 3808:2000 compliance mean? AS/NZS 3808:2000 is the Australian and New Zealand standard covering insulated conductors and cables for internal wiring of equipment. Compliance confirms the cable meets defined requirements for conductor construction, insulation properties and performance. Is this cable available in other sizes? OEX produces twin core figure 8 cable in a range of sizes. Contact us for available size options to suit your wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA AWP1520 20 Gauge Green Single Core Cable 100 Metres The DNA AWP1520 is a 20 gauge single core automotive cable in green, supplied on a 100-metre reel. Constructed from 37 strands of 0.12mm wire giving a 0.52mm² cross-section, with a 2mm outer diameter. Suited to low-current automotive wiring tasks including sensor wiring, lighting circuits and general accessory runs. Product overview The AWP1520 is part of the DNA single core automotive cable range, offering a practical bulk cable solution for installers and auto electricians who need reliable wire in a standard gauge. The 20 gauge (0.52mm²) specification suits lighter current-carrying applications in 12V automotive systems, and the green colour coding assists with circuit identification during installation and fault finding. Supplied on a 100-metre reel, the AWP1520 provides enough cable for multiple jobs from a single purchase. The stranded construction of 37 x 0.12mm conductors gives the cable flexibility for routing through tight spaces and around bends without fatigue. Features and benefits 20 gauge stranded construction: 37 x 0.12mm strands give a 0.52mm² cross-section, providing flexibility and resistance to conductor fatigue during installation and in service. Green colour coding: Green insulation assists with circuit identification, particularly in multi-wire installations where colour differentiation reduces wiring errors. 2mm outer diameter: Compact outer diameter suits tight routing paths and small grommets common in automotive applications. 100-metre reel: Bulk supply on a single reel covers multiple installations from one purchase, reducing cost per metre for trade use. Technical specs Specification Detail SKU AWP1520 Brand DNA Gauge 20 AWG Strands 37 x 0.12mm Cross-Section 0.52mm² Outer Diameter 2mm Colour Green Length 100 metres Packaging Reel Frequently asked questions What applications is 20 gauge single core cable suited to? 20 gauge cable at 0.52mm² is suited to low-current automotive circuits including sensor wiring, indicator and lighting runs, trigger wires and general accessory connections in 12V systems. For higher current applications, a heavier gauge cable should be selected. Is this cable sold in shorter lengths? The AWP1520 is supplied as a 100-metre reel. Contact us if you require a different length or gauge. Can this cable be used for speaker wiring? 20 gauge single core cable is not recommended for speaker wiring in car audio applications. Dedicated speaker cable in an appropriate gauge should be used for speaker runs. What does the stranded construction offer over solid core wire? Stranded wire is more flexible than solid core and better suited to automotive environments where vibration, movement and tight routing paths can cause solid core wire to fatigue and break over time. Is the green colour the only option available in this gauge? DNA produces single core automotive cable in a range of colours. Contact us for available colour options in 20 gauge if green does not suit your application.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA AWP1720 20 Gauge Orange Single Core Cable 100 Metres The DNA AWP1720 is a 20 gauge single core automotive cable in orange, supplied on a 100-metre reel with display cards. Constructed from 37 strands of 0.12mm wire giving a 0.52mm² cross-section, with a 2mm outer diameter. Suited to low-current automotive wiring tasks including sensor wiring, lighting circuits and general accessory runs. Product overview The AWP1720 is part of the DNA single core automotive cable range, offering a practical bulk cable solution for installers and auto electricians working with standard gauge wire. The 20 gauge (0.52mm²) specification suits lighter current-carrying applications in 12V automotive systems, and the orange colour coding assists with circuit identification during installation and fault finding. Supplied on a 100-metre reel with display cards, the AWP1720 provides enough cable for multiple jobs from a single purchase. The stranded construction of 37 x 0.12mm conductors gives the cable flexibility for routing through tight spaces and around bends without fatigue. Features and benefits 20 gauge stranded construction: 37 x 0.12mm strands give a 0.52mm² cross-section, providing flexibility and resistance to conductor fatigue during installation and in service. Orange colour coding: Orange insulation assists with circuit identification, particularly in multi-wire installations where colour differentiation reduces wiring errors. 2mm outer diameter: Compact outer diameter suits tight routing paths and small grommets common in automotive applications. 100-metre reel with display cards: Bulk supply on a reel with display cards covers multiple installations from one purchase, reducing cost per metre for trade use. Technical specs Specification Detail SKU AWP1720 Brand DNA Gauge 20 AWG Strands 37 x 0.12mm Cross-Section 0.52mm² Outer Diameter 2mm Colour Orange Length 100 metres Packaging Reel with display cards Frequently asked questions What applications is 20 gauge single core cable suited to? 20 gauge cable at 0.52mm² is suited to low-current automotive circuits including sensor wiring, indicator and lighting runs, trigger wires and general accessory connections in 12V systems. For higher current applications, a heavier gauge cable should be selected. Is this cable sold in shorter lengths? The AWP1720 is supplied as a 100-metre reel. Contact us if you require a different length or gauge. Can this cable be used for speaker wiring? 20 gauge single core cable is not recommended for speaker wiring in car audio applications. Dedicated speaker cable in an appropriate gauge should be used for speaker runs. What does the stranded construction offer over solid core wire? Stranded wire is more flexible than solid core and better suited to automotive environments where vibration, movement and tight routing paths can cause solid core wire to fatigue and break over time. Is orange the only colour available in this gauge? DNA produces single core automotive cable in a range of colours. Contact us for available colour options in 20 gauge if orange does not suit your application.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0808 Australian Made 4mm Twin Core Sheathed Automotive Cable Red and Black with Black Outer Sheath 30m Roll OFHC Copper 15A V90 The OEX ACX0808 is a 4mm twin core sheathed automotive cable supplied on a 30m roll. Red and black conductors are enclosed in a common black outer sheath, providing both polarity identification and an additional layer of mechanical and UV protection over a standard figure 8 configuration. Each conductor has a 1.84mm² OFHC copper cross-section rated at 15A at 30°C with 26-strand construction. The PVC insulation and sheath are UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Covered by a one year warranty. Product overview The ACX0808 is the 4mm variant in the OEX twin core sheathed automotive cable range, stepping up from the 3mm ACX0806 with a larger 1.84mm² conductor cross-section and a 15A continuous rating per conductor. The common black outer sheath encloses two separately insulated conductors and provides an additional layer of mechanical and UV protection over a standard figure 8 configuration, making it better suited to exposed runs, engine bay wiring, trailer feeds and installations where the cable will be routed through areas requiring extra abrasion or weather resistance. The red conductor is positive and the black conductor is negative or return, following standard automotive wiring convention. At 1.84mm² (15AWG) per conductor with a 15A continuous rating, the ACX0808 handles higher-current two-wire circuits including auxiliary and driving light wiring, accessory power and return feeds and trailer and caravan lighting circuits drawing up to 15A per conductor. The 26-strand construction provides flexibility for routing through tight spaces, and the UV stabilised V90 PVC insulation and sheath handle continuous operating temperatures up to 90°C. The 30m roll suits workshop jobs and multi-circuit installations without the bulk of a full-length trade roll. Features and benefits Sheathed twin core construction: Red and black conductors enclosed in a black outer sheath for added mechanical and UV protection and a cleaner finished appearance, suited to exposed runs and locations requiring extra abrasion or weather resistance. Red and black conductors: Conventional polarity colouring for straightforward positive and negative identification without additional marking or tape. OFHC copper conductors: Oxygen free high conductivity copper minimises resistance across the cable run, maintaining reliable electrical performance in automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. 15A rated at 30°C per conductor: Higher current capacity than the 3mm ACX0806, suited to auxiliary lighting, accessory wiring and higher-current two-wire circuits drawing up to 15A per conductor. Current carrying capacity reduces at higher ambient temperatures. UV stabilised PVC insulation and sheath: Resists degradation in sun-exposed and outdoor environments, extending the service life of the cable in exposed installation positions. V90 temperature rating (90°C): Insulation and sheath rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 26-strand construction: The 26-strand conductor provides flexibility and resistance to fatigue during installation and in service, suited to routing through tight spaces and around bends. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 30m roll: Workshop-friendly length for multi-circuit jobs without the bulk of a full-length trade roll. Technical specs Specification Detail SKU ACX0808 Brand OEX Cable Type Twin Core, Sheathed Industry Known Size 4mm Conductor Cross Section 1.84mm² per conductor Gauge 15AWG Conductor Strands 26 Strand Diameter 0.3mm Conductor Material OFHC Copper Amp Rating 15A at 30°C per conductor Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Conductor Colours Red and black Sheath Colour Black Length 30m Weight 1.71kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 30m roll Frequently asked questions What is the difference between sheathed twin core and figure 8 twin core cable? A sheathed twin core cable encloses two separately insulated conductors inside a common outer sheath, providing an additional layer of mechanical and UV protection. A figure 8 cable bonds two conductors side by side without a separate outer sheath. Sheathed cable is better suited to exposed runs and locations requiring extra abrasion or weather resistance. How does the ACX0808 compare to the ACX0806? Both are twin core sheathed cables with the same construction and sheath colour. The ACX0806 uses 3mm conductors at 1.13mm² and 10A per conductor. The ACX0808 uses larger 4mm conductors at 1.84mm² and 15A per conductor, suited to circuits where the 3mm 10A rating would be undersized. How do I tell which conductor is positive and which is negative? The red conductor is positive and the black conductor is negative or return, following standard automotive wiring colour convention. What is the amp rating per conductor? Each conductor is rated at 15A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. Is this cable available in other sizes or lengths? OEX produces twin core sheathed and figure 8 cable in a range of sizes and roll lengths. Contact us for available size and length options to suit your wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0927 Australian Made 8 B&S Twin Core Battery Cable Red and Black with Black Outer Sheath 30m Roll OFHC Copper 7.91mm² V90 The OEX ACX0927 is an 8 B&S twin core battery cable with a black outer sheath, supplied on a 30m roll. Red and black conductors each with a 7.91mm² OFHC copper cross-section across 112 strands are enclosed in a common black outer sheath, combining the high-current capacity of 8 B&S battery cable with the convenience of a single protected two-wire run. Rated to V90 (90°C) with UV stabilised PVC insulation and sheath. Compliant with AS/NZS 3808:2000 and RoHS. Covered by a one year warranty. Product overview The ACX0927 combines the conductor specification of the OEX 8 B&S single core battery cable range with a twin core sheathed format, allowing positive and negative high-current feeds to travel together in a single protected cable run. This makes it well suited to dual battery system main feeds, winch and recovery equipment power and return cables, battery interconnect two-wire runs and any application where positive and negative heavy-current feeds need to be routed together neatly and efficiently. At 7.91mm² per conductor with a 112-strand OFHC copper construction, each core provides the high-current capacity of the 8 B&S single core range while the shared black outer sheath provides additional mechanical and UV protection and results in a neater, more professional installation than routing two separate single-core cables. The UV stabilised V90 PVC insulation and sheath handle continuous operating temperatures up to 90°C for battery and engine bay installations. The 30m roll suits workshop jobs and single-vehicle heavy-duty installations. Always verify the required cable size with a licensed auto electrician for your specific application, current load and run length. Features and benefits 8 B&S twin core sheathed construction: Red and black conductors in a black outer sheath for clean, protected high-current two-wire runs, combining the current capacity of 8 B&S battery cable with the installation convenience of a single cable. Red and black conductors: Conventional polarity colouring for straightforward positive and negative identification without additional marking or tape. 7.91mm² per conductor: High-current 8 B&S cross-section for demanding automotive battery applications including dual battery feeds, winch power and return cables and heavy-duty accessory wiring. 112-strand construction per conductor: Provides flexibility for routing through tight engine bay and battery compartment spaces despite the large conductor gauge. OFHC copper conductors: Oxygen free high conductivity copper minimises resistance for efficient current transfer across high-current battery and supply circuit applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. UV stabilised PVC insulation and sheath: Resists degradation in sun-exposed and engine bay environments, extending the service life of the cable in exposed installation positions. V90 temperature rating (90°C): Insulation and sheath rated for continuous operation at up to 90°C, suited to battery and engine bay installation environments. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 30m roll: Workshop-friendly length for heavy-duty single-vehicle and multi-circuit installations. Technical specs Specification Detail SKU ACX0927 Brand OEX Cable Type Twin Core Battery Cable, Sheathed Gauge 8 B&S Conductor Cross Section 7.91mm² per conductor Conductor Strands 112 per conductor Strand Diameter 0.3mm Conductor Material OFHC Copper Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Conductor Colours Red and black Sheath Colour Black Length 30m Weight 4.22kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 30m roll Frequently asked questions What is the advantage of twin core battery cable over two separate single core cables? A twin core sheathed cable keeps positive and negative conductors together in a single protected run, resulting in a neater installation with less cable management. The shared outer sheath also provides additional mechanical and UV protection compared to two individual cables routed separately. What is 8 B&S gauge? 8 B&S (Brown and Sharpe) is equivalent to approximately 8 AWG and corresponds to a conductor cross-section of around 7.91mm² per conductor. It is a standard sizing reference used by Australian auto electricians for battery and heavy-duty automotive cable. How do I tell which conductor is positive and which is negative? The red conductor is positive and the black conductor is negative or return, following standard automotive wiring colour convention. What does AS/NZS 3808:2000 compliance mean? AS/NZS 3808:2000 is the Australian and New Zealand standard covering insulated conductors and cables for internal wiring of equipment. Compliance confirms the cable meets defined requirements for conductor construction, insulation properties and performance. Is this cable available in other sizes? OEX produces twin core battery cable in a range of B&S sizes. Contact us for available size options to suit your application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0908 Australian Made 2 B&S Single Core Battery Cable Black 30m Roll OFHC Copper 32.17mm² V90 The OEX ACX0908 is a 2 B&S single core battery cable in black, supplied on a 30m roll. With a 32.17mm² OFHC copper conductor across 455 strands, this is the largest cable in the OEX B&S battery cable range and is engineered for extreme high-current applications where maximum conductor cross-section, minimum resistance and outstanding flexibility are all required. The PVC insulation is UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Covered by a one year warranty. Weighs 10.71kg. Product overview At 32.17mm² with a 455-strand OFHC copper conductor, the ACX0908 delivers the lowest resistance and highest current-carrying capacity in the OEX B&S battery cable range, sitting above the 4 B&S (20.29mm²), 6 B&S (13.36mm²) and 8 B&S (7.91mm²) cables. This makes it suited to the most extreme high-current applications — heavy-duty battery interconnect and main supply cables, high-capacity winch and recovery equipment power feeds, commercial and heavy vehicle starter motor wiring, and high-current dual battery and auxiliary power system main feeds where no smaller cable in the range would be sufficient. The 455-strand construction delivers exceptional flexibility for a cable of this cross-section, making it manageable to route through tight engine bay and battery compartment spaces despite the very large gauge. The UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for battery and engine bay installations. The 30m roll suits workshop jobs and single-vehicle heavy-duty installations. Always verify the required cable size with a licensed auto electrician for your specific application, current load and run length. Features and benefits 2 B&S gauge — the largest in the OEX battery cable range: Maximum current-carrying capacity and minimum resistance for the most extreme high-current automotive and commercial vehicle applications. 32.17mm² conductor cross-section: Significantly larger than 4 B&S (20.29mm²), providing the lowest resistance and highest current-carrying capacity in the OEX B&S battery cable range. 455-strand construction: Exceptional flexibility for a cable of this cross-section, making the ACX0908 manageable to route through tight engine bay and battery compartment spaces despite the very large gauge. OFHC copper conductor: Oxygen free high conductivity copper minimises resistance for efficient current transfer across the most demanding extreme-current battery and supply circuit applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. UV stabilised PVC insulation: Resists degradation in sun-exposed and engine bay environments. V90 temperature rating (90°C): PVC insulation rated for continuous operation at up to 90°C, suited to battery and engine bay installation environments. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 30m roll: Workshop-friendly length for single-vehicle heavy-duty installations. Technical specs Specification Detail SKU ACX0908 Brand OEX Cable Type Single Core Battery Cable Gauge 2 B&S Conductor Cross Section 32.17mm² Conductor Strands 455 Strand Diameter 0.3mm Conductor Material OFHC Copper Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Cable Colour Black Length 30m Weight 10.71kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 30m roll Frequently asked questions What is B&S gauge and how does it differ from AWG or metric sizing? B&S (Brown and Sharpe) is a wire gauge system commonly used in Australian battery and heavy-duty automotive cable. 2 B&S is equivalent to approximately 2 AWG and corresponds to a conductor cross-section of around 32.17mm². It is a standard sizing reference used by Australian auto electricians and suppliers for battery and starter cables. How does 2 B&S compare to 4 B&S and 6 B&S? 2 B&S has the largest conductor cross-section in the OEX B&S range at 32.17mm², compared to 4 B&S (20.29mm²) and 6 B&S (13.36mm²). It delivers the lowest resistance and highest current-carrying capacity select 2 B&S for the most extreme current demands, longest runs or heaviest commercial vehicle applications where no smaller cable in the range is sufficient. Always verify the correct cable size with a licensed auto electrician for your specific application. Is a red positive version of this cable available? Contact us to confirm availability of a matching red 2 B&S cable for positive supply runs. OEX produces battery cable in a range of B&S sizes and colours across the range. What does V90 mean? V90 is the Australian cable insulation classification indicating the PVC insulation is rated for continuous operation at up to 90°C. It is the standard specification for automotive-grade PVC insulated cable in Australia and confirms suitability for battery and engine bay installation positions. Is this cable available in other sizes or colours? OEX produces battery cable in a range of B&S sizes and colours. Contact us for available size and colour options to suit your specific application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0811L Australian Made 6mm Twin Core Sheathed Automotive Cable Red and Black with Black Outer Sheath 100m Roll OFHC Copper 30A V90 The OEX ACX0811L is a 6mm twin core sheathed automotive cable supplied on a 100m roll. Red and black conductors are enclosed in a common black outer sheath, providing both polarity identification and an additional layer of mechanical and UV protection over a standard figure 8 configuration. At 30A per conductor, this is the highest-rated cable in the OEX sheathed twin core range. Each conductor has a 4.59mm² OFHC copper cross-section with 65-strand construction. The PVC insulation and sheath are UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Covered by a one year warranty. Weighs 12.56kg. Product overview The ACX0811L is the 100m roll version of the ACX0811 6mm twin core sheathed cable, suited to workshops and trade installers who regularly work with high-current two-wire runs across winch feeds, dual battery systems and heavy accessory circuits, and prefer the full 100m trade-length supply over the 30m workshop roll. The conductor specification, insulation rating and sheath construction are identical across both roll lengths. At 4.59mm² (11AWG) per conductor with a 30A continuous rating, the ACX0811L handles demanding applications where both positive and negative need to travel together with mechanical and UV protection. The 65-strand construction provides excellent flexibility for routing through tight spaces and around bends despite the larger 6mm gauge. The UV stabilised V90 PVC insulation and sheath handle continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. The 100m roll suits trade workshops, fleet operators and installers working across multiple high-current two-wire jobs from a single roll. At 12.56kg the roll is substantial — factor this into workshop handling and storage. Features and benefits Sheathed twin core construction: Red and black conductors enclosed in a black outer sheath for added mechanical and UV protection and a cleaner finished appearance, suited to exposed runs and locations requiring extra abrasion or weather resistance. Red and black conductors: Conventional polarity colouring for straightforward positive and negative identification without additional marking or tape. OFHC copper conductors: Oxygen free high conductivity copper minimises resistance across the cable run, maintaining reliable electrical performance in high-current automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. 30A rated at 30°C per conductor: The highest rating in the OEX sheathed twin core range, suited to winch feeds, dual battery runs, high-current relay circuits and heavy accessory wiring in 12V and 24V systems drawing up to 30A per conductor. Current carrying capacity reduces at higher ambient temperatures. UV stabilised PVC insulation and sheath: Resists degradation in sun-exposed and outdoor environments, extending the service life of the cable in exposed installation positions. V90 temperature rating (90°C): Insulation and sheath rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 65-strand construction: The 65-strand conductor provides excellent flexibility and resistance to fatigue during installation and in service, maintaining good routing flexibility despite the larger 6mm cable gauge. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 100m roll: Trade-length supply for workshops and fleet installers covering multiple high-current two-wire jobs from a single roll. Technical specs Specification Detail SKU ACX0811L Brand OEX Cable Type Twin Core, Sheathed Industry Known Size 6mm Conductor Cross Section 4.59mm² per conductor Gauge 11AWG Conductor Strands 65 Strand Diameter 0.3mm Conductor Material OFHC Copper Amp Rating 30A at 30°C per conductor Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Conductor Colours Red and black Sheath Colour Black Length 100m Weight 12.56kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 100m roll Frequently asked questions What is the difference between the ACX0811 and the ACX0811L? Both are the same 6mm twin core sheathed cable with identical conductor and insulation specifications. The ACX0811 is supplied on a 30m roll and the ACX0811L is supplied on a 100m roll. Select based on the quantity required for your installation workload. What is the difference between sheathed twin core and figure 8 twin core cable? A sheathed twin core cable encloses two separately insulated conductors inside a common outer sheath, providing an additional layer of mechanical and UV protection. A figure 8 cable bonds two conductors side by side without a separate outer sheath. Sheathed cable is better suited to exposed runs and locations requiring extra abrasion or weather resistance. How do I tell which conductor is positive and which is negative? The red conductor is positive and the black conductor is negative or return, following standard automotive wiring colour convention. What is the amp rating per conductor? Each conductor is rated at 30A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. Is this cable available in other sizes or lengths? OEX produces twin core sheathed and figure 8 cable in a range of sizes and roll lengths. Contact us for available size and length options to suit your wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0808L Australian Made 4mm Twin Core Sheathed Automotive Cable Red and Black with Black Outer Sheath 100m Roll OFHC Copper 15A V90 The OEX ACX0808L is a 4mm twin core sheathed automotive cable supplied on a 100m roll. Red and black conductors are enclosed in a common black PVC outer sheath, rated at 15A continuous at 30°C and built to AS/NZS 3808:2000. Each conductor uses 26-strand 0.3mm oxygen free high conductivity (OFHC) copper construction with a 1.84mm² cross-section. The PVC insulation and sheath are UV stabilised and rated to V90 (90°C). RoHS compliant. Covered by a one year warranty. Weighs 5.7kg. Product overview The ACX0808L is the 100m roll version of the ACX0808 4mm twin core sheathed cable, suited to workshops and trade installers running full vehicle wiring harnesses, complete caravan fit-outs or bulk workshop stock, where the full 100m trade-length supply is preferred over the 30m workshop roll. The conductor specification, insulation rating and sheath construction are identical across both roll lengths. Red and black conductors are routed and protected together in a single black outer sheath, simplifying installation and reducing cable management complexity while protecting both conductors from abrasion, UV and moisture. At 1.84mm² (15AWG) per conductor with a 15A continuous rating, the ACX0808L suits auxiliary lighting circuits, caravan and motorhome 12V accessory wiring, marine accessory circuits, dual battery system feeds and general 12V and 24V vehicle accessory installation. The V90 temperature rating and UV stabilised construction make it suitable for underbonnet environments, external routing on roof racks and chassis rails, and the demanding Australian conditions of coastal salt air, high UV and elevated ambient temperatures. Always derate for ambient temperatures above 30°C. The 15A rating also defines the correct inline fuse size — protect this cable with a maximum 15A fuse at the power source end of the circuit. Features and benefits OFHC copper for maximum conductivity and minimum resistance: Oxygen free high conductivity copper eliminates the oxygen inclusions that reduce conductivity in standard copper cable. Lower resistance means less voltage drop over length and less heat generation at rated current, both critical in automotive circuits with long cable runs. Sheathed twin core construction: Red and black conductors enclosed in a black outer sheath route and protect both conductors together in a single cable run, simplifying installation and reducing cable management complexity over running two separate singles. Red and black conductors: Conventional polarity colouring for straightforward positive and negative identification without additional marking or tape. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. 15A rated at 30°C per conductor: Suited to auxiliary lighting circuits, caravan accessory feeds, marine wiring and general 12V and 24V two-wire circuits drawing up to 15A per conductor. Always derate for elevated ambient temperatures above 30°C. V90 temperature rating (90°C): Insulation and sheath rated for continuous operation at up to 90°C, suited to underbonnet environments and high-temperature automotive applications including roof-mounted solar runs in Australian summer conditions. UV stabilised PVC insulation and sheath: Resists degradation from prolonged sun exposure, suited to external routing on roof racks, chassis rails and caravan and motorhome builds where UV exposure is ongoing. 26-strand construction per conductor: 26 strands of 0.3mm wire per conductor provide flexibility and vibration resistance suited to the constant movement and vibration experienced by wiring in a vehicle, reducing the risk of work-hardening and fracture compared to lower-strand-count conductors. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for automotive cable construction, insulation and performance, suited to trade installations, compliance-sensitive builds and registered vehicle and caravan wiring. RoHS compliant: Meets hazardous substance restrictions. 100m roll: Full project and bulk supply format suited to complete vehicle wiring harnesses, caravan fit-outs and workshop bulk stock without needing to join rolls mid-project. Technical specs Specification Detail SKU ACX0808L Brand OEX Cable Type Twin Core, Sheathed Industry Known Size 4mm Conductor Cross Section 1.84mm² per conductor Gauge 15AWG Conductor Strands 26 Strand Diameter 0.3mm Conductor Material OFHC Copper Amp Rating 15A at 30°C per conductor Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Conductor Colours Red and black Sheath Colour Black Length 100m Weight 5.7kg Compliance AS/NZS 3808:2000, RoHS NZ Code 153 Warranty One year Sold As 100m roll Frequently asked questions What is the difference between the ACX0808 and the ACX0808L? Both are the same 4mm twin core sheathed cable with identical conductor and insulation specifications. The ACX0808 is supplied on a 30m roll and the ACX0808L is supplied on a 100m roll. Select based on the quantity required for your installation workload. What does OFHC copper mean and why does it matter? OFHC stands for oxygen free high conductivity copper. Removing oxygen from the copper during manufacturing increases conductivity and reduces resistance compared to standard copper cable. For automotive wiring, this means lower voltage drop over long cable runs and reduced heat generation at rated current. What is the current rating and does it change with temperature? The ACX0808L is rated at 15A continuous at 30°C ambient. In higher ambient temperatures such as underbonnet or enclosed spaces in Australian summer conditions, the current carrying capacity reduces. Derate to a lower current limit for elevated-temperature applications or consult a licensed auto electrician. What fuse size should I use with this cable? This cable is rated at 15A at 30°C. Protect it with a maximum 15A inline fuse at the power source end of the circuit. Using a larger fuse defeats the protection the fuse provides for the cable. Is this cable compliant for professional auto electrical installations in Australia? Yes. The ACX0808L complies with AS/NZS 3808:2000, the Australian and New Zealand standard for automotive cable. This makes it appropriate for professional auto electrical installations, trade workshops and compliance-sensitive builds including registered vehicles and caravans. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0799L Australian Made 2mm Twin Core Automotive Cable Red and Black in One Sheath 100m Roll OFHC Copper 5A V90 The OEX ACX0799L is a 100m roll of 2mm twin core automotive cable, featuring two separately insulated conductors (red positive and black negative) enclosed in a single black outer sheath. Running both supply and return in one cable simplifies wiring for trailer lighting harnesses, automotive accessory circuits, auxiliary lighting runs and any application where a single neat cable run is preferable to routing two separate singles. Made from oxygen free high conductivity (OFHC) copper, rated to V90 (90°C), UV stabilised and RoHS compliant. Rated at 5A at 30°C, suited to low to moderate current loads including trailer lighting, LED strip runs and general purpose automotive signalling circuits. Product overview Twin core cable contains two separately insulated conductors inside a single outer sheath, delivering a complete circuit in one cable run. The ACX0799L uses red for the positive conductor and black for the negative or earth conductor, following the standard automotive wiring colour convention. Routing one twin core cable instead of two separate singles reduces installation time, simplifies cable management and produces a neater, more professional finished wiring run. This makes the ACX0799L particularly well suited to trailer lighting harnesses, caravan wiring runs, LED accessory feeds and low-current sensor and signalling applications. The OFHC copper conductors use less than 0.001% oxygen content, minimising resistance and reducing oxidation over time for consistent current transfer across the full 100m roll. The UV stabilised black outer sheath resists cracking, hardening and degradation from prolonged sun exposure, important for cable runs on trailer chassis, caravan exteriors and any exposed routing in Australian outdoor environments. The 100m roll format suits trade workshop supply, fleet wiring projects and large-scale trailer harness builds where consistent cable specification across the entire job is required. Features and benefits Twin core configuration, red and black in one sheath: Two separately insulated conductors enclosed in a single black outer sheath. One cable run delivers a complete circuit, eliminating the need to route and secure two separate single-core cables and significantly reducing installation time on trailer harnesses and accessory wiring runs. OFHC copper conductors: Less than 0.001% oxygen content minimises resistance, reduces oxidation over time and ensures consistent current transfer across the full 100m roll. 5A rated at 30°C: Confirmed current carrying capacity at 30°C ambient temperature, suited to trailer lighting circuits, LED accessory feeds, signalling wiring and low to moderate current automotive applications. Current carrying capacity reduces at ambient temperatures above 30°C. V90 temperature rating (90°C): The insulation is rated to the Australian V90 standard, withstanding sustained temperatures of 90°C, suited to vehicle tray and trailer installations where ambient heat can be significant. UV stabilised outer sheath: The black outer sheath resists cracking, hardening and degradation from prolonged sun exposure, suited to exposed cable runs on trailer chassis, caravan bodies and vehicle trays in Australian conditions. RoHS compliant: Confirms the cable is free from restricted hazardous substances including lead, cadmium and mercury. Australian owned and made: Manufactured in Australia to local quality standards, ensuring material traceability for professional auto electricians and fleet operators. 100m roll: Trade format suited to workshop supply, fleet wiring projects and large-scale trailer harness builds. Consistent cable specification across the entire job from a single roll. Technical specs Specification Detail SKU ACX0799L Brand OEX Configuration Twin core Conductor Colours Red and black Outer Sheath Colour Black Conductor Diameter 2mm per core Conductor Material OFHC Copper Current Rating 5A at 30°C Temperature Rating V90 (90°C) UV Stabilised Yes Compliance RoHS Length 100m Origin Australian owned and made Sold As 100m roll Frequently asked questions What does twin core cable mean and why use it instead of two separate singles? Twin core cable contains two separately insulated conductors inside a single outer sheath. Running one twin core cable instead of two separate single-core cables simplifies installation, reduces the number of cable management steps and results in a neater, more professional finished wiring run. The ACX0799L uses red for positive and black for negative, following standard automotive colour convention. What current can the ACX0799L carry and is it suitable for trailer lighting? The ACX0799L is rated at 5A at 30°C ambient temperature, suited to trailer lighting circuits, LED strip feeds and low-current accessory wiring. Confirm that the total current draw of your circuit does not exceed 5A, and note that carrying capacity reduces at higher ambient temperatures. Is this cable suitable for outdoor, exposed caravan and trailer wiring? Yes. The UV stabilised black outer sheath and V90 rated insulation make the ACX0799L well suited to outdoor, exposed cable runs on trailer chassis, caravan bodies and vehicle trays, resisting UV degradation and sustained heat common in Australian outdoor environments. Why does the current rating specify 30°C specifically? Current carrying capacity is temperature dependent. At higher ambient temperatures, cables carry less current safely before the insulation reaches its rated limit. The 5A rating at 30°C is the confirmed baseline. For installations in hotter environments such as underbonnet applications, confirm the appropriate current limit with OEX or a licensed auto electrician before use. Can this cable be used alongside the OEX single-core battery cables in the same installation? Yes. The ACX0799L suits low-current signalling and lighting circuits at 5A. The OEX single-core cable range covers higher-current battery and primary power feeds at larger gauges. Using both in the same installation allows cable gauge to be matched precisely to each circuit's current requirements. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0763L Australian Made 6mm Single Core Automotive Cable Red 100m Roll OFHC Copper 30A V90 The OEX ACX0763L is a 6mm single core automotive cable in red, supplied on a 100m roll. Manufactured in Australia from oxygen free high conductivity (OFHC) copper, it features a 4.59mm² conductor cross-section and a 30A continuous rating at 30°C, suited to higher-demand circuits including winch feeds, heavy accessory wiring, dual battery runs and other applications requiring substantial current-carrying capacity. The red PVC insulation is UV stabilised and rated to V90 (90°C). Compliant with AS/NZS 3808:2000 and RoHS. Product overview The ACX0763L is the red 100m roll variant in the OEX 6mm single core automotive cable range, sharing the same conductor specification and insulation rating as the black ACX0761L. Red is the conventional positive wiring colour in automotive and marine electrical installations, making the ACX0763L the natural choice for positive main feeds, winch power supplies, dual battery positive runs and heavy accessory feeds in 6mm installations where colour convention supports circuit identification. At 4.59mm² (11AWG) with a 30A continuous rating, this cable handles circuits where the 5mm 20A-rated cable would be undersized. The 65-strand conductor construction provides excellent flexibility for routing through tight spaces and around bends despite the larger gauge. The UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. The 100m roll suits workshops and trade installers covering multiple jobs from a single roll. Features and benefits OFHC copper conductor: Oxygen free high conductivity copper minimises resistance and signal loss across the cable run, maintaining reliable electrical performance in high-current automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. Red colour coding: Red is the conventional positive wiring colour in automotive and marine electrical installations, assisting with circuit identification in high-current positive main feeds, dual battery runs and winch supply wiring. 30A rated at 30°C: A significant step up from the 5mm range, suited to winch feeds, dual battery runs, high-current relay circuits and heavy accessory wiring in 12V and 24V systems drawing up to 30A. UV stabilised PVC insulation: Resists degradation in sun-exposed and underbonnet environments. V90 temperature rating: PVC insulation rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 65-strand construction: The 65-strand conductor provides excellent flexibility and resistance to fatigue during installation and in service, maintaining good routing flexibility despite the larger cable gauge. AS/NZS 3808:2000 compliant: Meets the Australian and New Zealand standard for insulated conductors and cables for internal wiring of equipment. RoHS compliant: Meets hazardous substance restrictions. 100m roll: Trade-length supply for workshops and fleet installers covering multiple jobs from a single roll. Technical specs Specification Detail SKU ACX0763L Brand OEX Cable Type Single Core Automotive Industry Known Size 6mm Conductor Cross Section 4.59mm² Gauge 11AWG Conductor Strands 65 Strand Diameter 0.32mm Conductor Material OFHC Copper Amp Rating 30A at 30°C Voltage Rating Up to 110V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Cable Colour Red Length 100m Weight 4.9kg Compliance AS/NZS 3808:2000, RoHS Warranty One year Sold As 100m roll Frequently asked questions How does 6mm cable compare to the smaller sizes in the OEX range? The 6mm cable has a larger conductor cross-section (4.59mm²) and higher amp rating (30A at 30°C) than the 5mm (2.9mm², 20A), 4mm (1.84mm², 15A), 3mm (1.13mm², 10A) and 2mm (0.5mm², 5A) cables. Select the 6mm where circuits draw up to 30A, such as winch feeds, dual battery runs and high-draw accessory wiring that would exceed the capacity of the 5mm range. What is the amp rating for this cable? This cable is rated at 30A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. What does V90 mean? V90 is the Australian cable insulation classification indicating the PVC insulation is rated for continuous operation at up to 90°C. It is the standard specification for automotive-grade PVC insulated cable in Australia and confirms suitability for underbonnet and outdoor-exposed installation positions. What does AS/NZS 3808:2000 compliance mean? AS/NZS 3808:2000 is the Australian and New Zealand standard covering insulated conductors and cables for internal wiring of equipment. Compliance confirms the cable meets defined requirements for conductor construction, insulation properties and performance. Is this cable available in other colours or lengths? OEX produces single core automotive cable in a range of colours and roll lengths across the 2mm, 3mm, 4mm, 5mm and 6mm ranges. Contact us for available colour and length options to suit your specific wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less