Victron Energy Blue Smart IP22 Charger 12/20(1) 230V AU/NZ: Blue Smart IP22 Charger 12/20(1) 230V AU/NZ Bluetooth enabled - the blue smart ip22 charger is the wireless solution to monitor voltage and current, change settings, and update the charger when new features become available.High efficiency - with up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. Once the battery is fully charged, power consumption reduces to 0,5 watts, some five to ten times better than the industry standardAdaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage. The blue smart charger features a microprocessor-controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.Storage mode - less maintenance and aging when the battery is not in use. The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode, float voltage is reduced to 2,2v/cell (13,2v for a 12v battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.Li-ion (lifepo₄) batteries - lifepo₄ batteries are charged with a simple bulk–absorption–float algorithm.Night and low setting - when in the night or low mode, the output current is reduced to max. 25% of the nominal output and the charger will be totally noiseless. The night mode automatically ends after 8 hours. The low mode can be ended manually.Protected against overheating - output current will reduce as temperature increases up to 50°c, but the blue smart charger will not fail.Eleven LEDs for status indication - charge algorithm: test / bulk / absorption / recondition / float/storage / ready. Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy Battery Monitor BMV-712 Smart: The BMV-712 Is The Latest High Precision Battery Monitor From Victron The BMV-712 monitor's voltage and current of a single battery bank and calculates power, state-of-charge, and time-to-go. It also features an additional voltage input that can be used to measure an auxiliary or starter battery voltage, midpoint voltage, or temperature with the optional temperature sensor. Data can be transferred to smartphones or computers with the inbuilt Bluetooth module and external alarms can be triggered with the relay contact. Installation is simply a case of connecting the supplied shunt in the negative battery cable, mounting the monitor in a 52mm diameter hole, and connecting the wires. An optional wall enclosure is available if surface mounting is preferred. What's in the Box: BMV 712 battery monitor 500A shunt and adapter board 10m cable to connect shunt to BMV 2x Positive voltage sense wire with fuse Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Our Best Value Fuses, Great Quality at Great Prices Legendary Products & Support From Authorized Dealers When you choose Revolution, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Revolution dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Revolution's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Revolution dealer today!

Read more less

Victron Energy Battery Monitor BMV-712 BLACK Smart: The Latest High Precision Battery Monitor From Victron The BMV-712 monitor the voltage and current of a single battery bank and calculates power, state of charge, and time-to-go. It also features an additional voltage input that can be used to measure an auxiliary or starter battery voltage, midpoint voltage, or temperature with the optional temperature sensor. Data can be transferred to smartphones or computers with the inbuilt Bluetooth module and external alarms can be triggered with the relay contact.Installation is simply a case of connecting the supplied shunt to the negative battery cable, mounting the monitor in a 52mm diameter hole, and connecting the wires. An optional wall enclosure is available if surface mounting is preferred. Victron Energy BAM030712200R Specifications: Battery Monitor: Bmv-712 Smart Supply Voltage Range: 6,5 - 70 Vdc Current Draw, Backlight Off < 1ma Input Voltage Range, Auxiliary Battery 6,5 - 70 Vdc Battery Capacity (Ah) 1 - 9999 Ah Operating Temperature Range -40 +50°c (-40 - 120°f) Measures Voltage Of Second Battery, Or Temperature, Or Midpoint Yes Temperature Measurement Range -20 +50°c VE.direct Communication Port Yes Bistable Relay 60v / 1a Normally Open (Function Can Be Inverted) Resolution & Accuracy (With A 500 A Shunt) Current ± 0,01a Voltage ± 0,01v Amp Hours ± 0,1 Ah State Of Charge (0 – 100%) ± 0,1% Time To Go ± 1 Min Temperature (0 - 50°c Or 30 - 120°f) ± 1°c/°f Accuracy Of Current Measurement ± 0,4% Accuracy Of Voltage Measurement ± 0,3% Installation Flush Mount Front 63mm Diameter Front Bezel 69 X 69mm (2.7 X 2.7 Inch) Body Diameter And Depth 52mm (2.0 Inches) And 31mm (1.2 Inch) Protection Categoryip55 (Not Intended For Outdoor Use) Safety En 60335-1 Emission / Immunity En 55014-1 / En 55014-2 Automotive Ece R10-4 / En 50498 Shunt (Included) 500a / 50mv Cables (Included) 10 Meter 6 Core Utp With Rj12 Connectors, And Cable With Fuse For ‘+’ Connection Temperature Sensor Optional (Vic.ass000100000) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Workshop staple in bulk—100 x 20A blade fuses for the bench, toolbox, or service bay. Product Overview The OEX ACX1605 delivers 100 x 20-amp standard blade fuses in one workshop-ready pack, eliminating the frustration of running out mid-job or making emergency trips to suppliers. These yellow-coded 20A fuses fit the standard ATO/ATC blade fuse slots found across virtually every Australian vehicle from the 1980s onwards, plus caravans, boats, and 12V accessories. At 19mm x 19mm dimensions, they're the universal automotive fuse standard that protects circuits in everything from basic lighting and accessories through to moderate-draw equipment like auxiliary pumps, fans, and 12V outlets. OEX backs these fuses with a 1-year warranty, and bulk pack pricing makes this the smart buy for workshops, auto electricians, fleet maintenance, or serious DIYers who value having the right fuse on hand when a circuit blows. Key Specifications Amperage rating: 20A (amps) Fuse type: Standard blade (ATO/ATC) Colour code: Yellow (industry standard for 20A) Dimensions: 19mm x 19mm (standard blade size) Pack quantity: 100 fuses Voltage rating: 32V DC (standard automotive) Warranty: 1 year manufacturer warranty Weight: 0.178 kg per 100-pack Material: Zinc alloy blade terminals, thermoplastic housing Compliance: Meets automotive blade fuse standards Features & Benefits 100-Pack Eliminates "Out of Stock" PanicKeep 100 x 20A fuses on the shelf and you'll never halt a job searching through mixed fuse assortments or discovering you're fresh out when a customer's auxiliary circuit blows. Perfect for workshops doing regular auto electrical work, service bays replacing blown fuses during routine maintenance, or fleet operators maintaining multiple vehicles. 20-Amp Rating for Common Auxiliary CircuitsThe 20A rating suits a huge range of automotive applications: 12V accessory sockets (cigarette lighter outlets), auxiliary lighting circuits, electric fuel pumps, cooling fans, car audio head units, reversing cameras, and aftermarket accessories drawing 10-18 amps continuous. It's the Goldilocks rating between light-duty 10A/15A circuits and heavy-duty 25A/30A loads. Yellow Industry Colour CodingYellow housing instantly identifies these as 20A fuses, matching the universal automotive colour standard used across virtually every vehicle manufacturer. No squinting at tiny amp markings—grab yellow, you've got 20 amps. Critical when you're fault-finding under a dash or working in poor light. Standard Blade Fitment Across Decades of VehiclesThese 19mm x 19mm standard blade fuses (ATO/ATC type) fit the fuse boxes in Australian-delivered vehicles from the mid-1980s through to current models, plus the majority of caravans, camper trailers, boats, and 12V accessory installations. One fuse type covers an enormous application range. OEX Quality at Bulk Pack PricingOEX is a trusted Australian brand in auto electrical components, and buying 100-packs delivers better value per fuse than retail blister packs while ensuring consistent quality across the batch. These aren't marketplace specials of unknown origin—they're backed by OEX's 1-year warranty. Workshop-Friendly PackagingThe bulk pack format suits workshop parts bins, service van storage, or toolbox organisation. Decant into labelled containers for quick access, or keep the pack intact for inventory control in commercial environments. Also Available in 5-Packs for RetailIf you're a DIY customer needing a handful rather than a hundred, OEX offers the same fuse in 5-packs (ACX1605BL) for glovebox spares or single-vehicle use. Technical Specs Amperage: 20A Voltage Rating: 32V DC (typical automotive application) Fuse Type: Blade fuse (standard/ATO/ATC) Blade Configuration: Standard 19mm x 19mm Housing Colour: Yellow (ISO 8820 colour coding for 20A) Terminal Material: Zinc alloy with tin plating Housing Material: Thermoplastic (flame-retardant) Operating Temperature: -40°C to +85°C (typical automotive range) Breaking Capacity: Fast-blow characteristics for circuit protection Dimensions: 19mm width x 19mm height x 5mm thickness (standard blade profile) Pack Quantity: 100 fuses Total Pack Weight: 0.178 kg (approximately 1.78g per fuse) Warranty Period: 1 year from purchase date Also Available: ACX1605BL (5-pack retail version) Compatible With / Goes Well With OEX Standard Blade Fuses - Other AmperagesComplete your fuse inventory with OEX standard blade fuses in 5A, 10A, 15A, 25A, and 30A ratings to cover the full range of automotive circuit protection requirements. OEX Blade Fuse Holders and PanelsOEX inline blade fuse holders, fuse blocks, and distribution panels for adding fused circuits in auxiliary wiring, 12V accessory installations, and custom electrical systems. OEX Mini Blade FusesOEX mini blade fuse range for newer vehicles using compact mini-blade fuse boxes (typically 2000s onwards, especially European and Asian manufacturers). Automotive Circuit TestersMultimeters, test lights, and circuit testers for diagnosing blown fuses and identifying circuit faults before replacement. Blade Fuse PullersPlastic fuse pullers prevent damage to fuse terminals and surrounding fuse box sockets when extracting tight-fitting blade fuses. Workshop Storage SolutionsParts bin organisers, wall-mounted storage racks, and labelled containers for maintaining organised fuse inventory by amperage and type. Vehicle ApplicationsSuitable for Australian-delivered vehicles from mid-1980s onwards, caravans, camper trailers, boats, agricultural equipment, 4WD auxiliary systems, and aftermarket 12V installations requiring standard blade fuse circuit protection. Weight 0.178 kg per 100-pack (approximately 1.78g per individual fuse). Frequently Asked Questions What's the difference between standard and mini blade fuses?Standard blade fuses (19mm x 19mm, like these) are the original automotive blade fuse used since the 1980s. Mini blade fuses are smaller (10.9mm x 16mm) and found in newer vehicles with compact fuse boxes—these standard fuses won't fit mini fuse slots. Can I use a 20A fuse in a circuit that originally had 15A?No—always replace fuses with the same amperage rating specified by the vehicle or equipment manufacturer. Using higher-rated fuses removes overcurrent protection and risks circuit damage or fire if a fault occurs. What automotive circuits typically use 20A fuses?Common 20A applications include 12V accessory sockets, auxiliary lighting circuits, electric fuel pumps, radiator cooling fans, car stereo head units, reversing cameras, trailer brake controllers, and aftermarket accessories drawing 10-18 amps continuous load. Are these fuses suitable for marine or caravan use?Yes, standard blade fuses are widely used in caravans, camper trailers, and boats for 12V DC circuits. The 20A rating suits water pumps, interior lighting circuits, 12V outlets, and moderate-draw accessories in recreational vehicle applications. What's the shelf life of unused blade fuses?Blade fuses have no practical shelf life when stored in dry conditions away from corrosive environments. The zinc alloy terminals may develop surface oxidation over many years, but this won't affect performance in typical workshop storage. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Professional-grade charging and maintenance for modern multi-chemistry battery systems The Oricom BC210 Battery Charger and Maintainer delivers 20-amp charging capability across both 12V and 24V systems, supporting modern lithium chemistries alongside traditional lead-acid battery types. This advanced seven-stage charger adapts voltage output based on ambient temperature, preventing over-charging in summer heat and under-charging in winter cold. The one-button interface simplifies battery type selection between lithium, AGM, gel, flooded, SLA, EFB, and LiFePO4 chemistries, while a three-position current switch provides adjustable charging rates for different battery capacities and conditions. Beyond standard charging, the BC210 includes a repair function specifically engineered to recover sulfated, weak, or idle lead-acid batteries through controlled pulse charging. The LCD screen displays real-time voltage, current, battery charge level, and temperature data, keeping you informed throughout the charging cycle. Comprehensive protection systems guard against overcharge, reverse polarity, and short circuits. Whether maintaining workshop vehicles, recovering stored batteries, or managing touring setups with mixed battery chemistries, this charger handles cars, motorcycles, boats, caravans, and 4WD dual-battery systems with professional reliability. Key Specifications Output: 20 amps maximum charging current Voltage: 12V and 24V compatible (auto-detection) Battery Chemistry Support: Lithium, LiFePO4, AGM, Gel, SLA, Flooded, EFB Charging Program: 7-stage intelligent charging Temperature Compensation: Automatic voltage adjustment Repair Mode: Lead-acid battery recovery function Current Adjustment: 3-position switch for precise control LCD Display: Shows voltage, current, charge level, temperature Protection: Overcharge, reverse polarity, short circuit Input: AC mains power (cord included) Connections: Battery clamps + O-ring connectors included Warranty: 3 years manufacturer's warranty Features & Benefits Multi-Chemistry Compatibility — Supports lithium-ion, LiFePO4, and all lead-acid types in one unit, eliminating the need for separate chargers when managing modern dual-battery 4WD setups or mixed workshop fleets. 20-Amp High-Current Output — Delivers substantial charging power for larger batteries, reducing charge times for caravan, boat, and truck batteries while remaining suitable for smaller motorcycle and lawn equipment batteries. Temperature-Compensated Charging — Automatically adjusts voltage based on ambient temperature, critical for Australian extremes where summer heat risks overcharge damage and winter cold reduces charging efficiency. Battery Repair Function — Recovers sulfated, weak, or long-stored lead-acid batteries through controlled desulfation pulses, potentially saving batteries that conventional chargers would abandon as failed. 12V/24V Automatic Detection — Recognizes system voltage automatically, making this charger suitable for standard passenger vehicles (12V) and heavy commercial, marine, or dual-battery touring setups (24V). Seven-Stage Intelligent Charging — Progresses through desulfation, soft start, bulk charge, absorption, battery test, reconditioning, and float maintenance stages, optimizing battery health and longevity beyond simple constant-current charging. Adjustable Current Control — Three-position switch allows matching charge rate to battery size and condition, preventing overheating in small batteries while maximizing charge speed for large deep-cycle units. Comprehensive LCD Display — Real-time data visibility eliminates guesswork during charging, allowing you to monitor progress, verify completion, and identify potential battery issues before disconnecting. Workshop-Grade Protection — Multiple safety systems prevent reverse connection damage, short circuit hazards, and overcharge failures common with basic chargers, protecting both batteries and vehicle electrical systems. Technical Specs Model: BC210 Maximum Output Current: 20A System Voltage: 12V / 24V (auto-detection) Charging Program: 7-stage intelligent charging algorithm Supported Battery Types: Lithium-ion, LiFePO4, AGM, Gel, SLA, Flooded, EFB Temperature Compensation: Automatic voltage adjustment Repair Mode: Available for lead-acid batteries only Current Settings: 3-position adjustable switch Display: LCD (voltage, current, charge percentage, temperature) Safety Features: Overcharge protection, reverse polarity protection, short circuit protection Input: AC mains (cord included) Connections Included: Battery clamps, O-ring terminal connectors Warranty: 3 years Frequently Asked Questions Can I use this charger on lithium auxiliary batteries in my 4WD? Yes, the BC210 supports lithium-ion and LiFePO4 chemistries. Select the appropriate battery type using the one-button interface before charging to ensure correct voltage profile and protection parameters. Will the repair mode work on all battery types? No, the repair function is designed specifically for lead-acid batteries (AGM, gel, flooded, SLA, EFB). Do not use repair mode on lithium or LiFePO4 batteries as the desulfation process is inappropriate for lithium chemistries. Can I leave this connected as a maintainer for stored vehicles? Yes, the seven-stage program includes float maintenance mode, allowing safe long-term connection for vehicle storage, caravan off-season maintenance, or workshop battery preservation without overcharge risk. What's the difference between the three current settings? The three-position switch adjusts charging current to match battery capacity. Use lower settings for small motorcycle or lawn equipment batteries, higher settings for large deep-cycle or truck batteries to optimize charge time without overheating. Does the charger work on completely flat batteries? The charger can recover deeply discharged batteries, though severely damaged cells may not recover fully. The repair mode specifically targets sulfated batteries, but batteries with physical damage or complete cell failure will require replacement. Compatible With 12V passenger vehicles, motorcycles, and marine applications 24V commercial vehicles, trucks, and heavy equipment Dual-battery 4WD touring setups (12V and 24V configurations) Caravan and motorhome battery systems Workshop and garage battery maintenance programs Lithium auxiliary battery installations AGM, gel, and flooded deep-cycle batteries Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Orion XS 12/12-50A - Ultimate Dual Battery Charging for Modern Vehicles Running a dual battery setup in your 4WD, caravan, or marine vessel? The Victron Orion XS 12/12-50A redefines DC-DC battery charging with engineering that's built from the ground up for intelligent alternator compatibility and maximum system safety. This isn't just another battery isolator – it's a complete charging solution that safely combines any alternator with any battery type. Delivering 700W of continuous power at an industry-leading 98.5% efficiency, the Orion XS 12/12-50A protects your starter battery, prevents alternator overload, and ensures your auxiliary battery receives the perfect charge voltage – even from Euro 5 and Euro 6 engines with smart alternators that don't provide consistent high voltage. With VE.Direct connectivity, full remote monitoring via the VictronConnect App, and IP65 dust and waterproof protection. This is professional-grade DC-DC charging that works flawlessly in the toughest Australian conditions. Victron Orion XS 12/12-50A Features & Benefits Engine Running Detection - Automatically isolates your service battery when the engine is off, protecting your starter battery from parasitic drain and ensuring reliable engine starts every time. Smart Alternator Compatibility - Purpose-built for Euro 5 and Euro 6 engines with intelligent alternators that vary output voltage, the Orion XS boosts inconsistent 10.4V alternator output to optimal 14.2V charging levels for complete battery charging. 98.5% Efficiency Rating - Five times more efficient than previous generation DC-DC chargers, the ultra-efficient aluminium circuit board design minimizes heat generation and maximizes power transfer without requiring cooling fans. Configurable Input & Output Current - Fully adjustable charge current from 1-50A allows you to tailor charging to your specific alternator capacity, battery size, and system requirements for optimal performance and safety. Adaptive Charging Algorithm - Eight preset battery modes plus customizable algorithms ensure perfect charging for AGM, Gel, Flooded, Lithium, and other battery chemistries with optimized absorption times for both shallow and deep discharges. VictronConnect App Integration - Full remote monitoring and control via Bluetooth Smart on iOS and Android devices, allowing you to view real-time performance data, adjust settings, and monitor system health from anywhere. VE.Direct Communication Port - Integrates seamlessly into complete Victron Energy systems for centralized monitoring, data logging, and control through Color Control GX, Cerbo GX, or VRM Portal online monitoring. Comprehensive Electronic Protection - Advanced safeguards against overload, short circuit, and excessive temperatures with automatic power reduction when maximum operating temperature is reached, ensuring long-term reliability. Low Temperature & Undervoltage Protection - Automatically shuts down at low temperatures to prevent lithium battery damage, plus user-configurable input voltage lockout prevents deep discharge of your starter battery. IP65 Dust & Waterproof Rating - Sealed construction withstands harsh environments including dust, mud, water spray, and salt air, making it perfect for 4WD touring, marine applications, and commercial vehicles. Compact Aluminium Construction - Measuring just 137.3 x 123.3 x 40mm and weighing only 0.73lb, the lightweight design allows flexible mounting options under bonnet, under seat, or in limited-space installations. Maximum 40°C Continuous Operation - Runs at full 700W output capacity even in extreme Australian heat up to 40°C (derating only 1.5% per °C above 40°C), ensuring consistent performance in outback conditions. Can Be Used as Power Supply - Versatile functionality allows operation as a stable DC power supply when output voltage is set via VictronConnect App, adding flexibility beyond battery charging applications. Screw Terminal Connections - Professional-grade DC connections ensure secure, vibration-resistant wiring with maximum cable cross-section of 4AWG (21.2mm²) for reliable high-current performance. Technical Specifications: Type: DC-DC Battery-to-Battery Charger Input Voltage Range: 9-17V DC Output Voltage Adjust Range: 10-17V DC (configurable) Output Voltage Tolerance: +/- 0.25% maximum Output Voltage Noise: 10mV RMS Input & Output Current Setting Range: 1-50A (adjustable) Maximum Constant Short-Circuit Current: 50A Continuous Output Power (up to 40°C): 700W Maximum Efficiency: 98.5% No-Load Current Consumption: < 100mA Standby Current Consumption: < 1.5mA Operating Temperature Range: -20 to +60°C (derating 1.5% per °C above 40°C) Humidity: 95% non-condensing Maximum Altitude: 2000m Pollution Degree: PD2 Overvoltage Category: OVC II DC Connection: Screw terminals (4AWG / 21.2mm² max) Maximum Cable Cross-Section: 4AWG (21.2mm²) Protection Category: IP65 (dust and waterproof) Communication: VictronConnect App (Bluetooth Smart), VE.Smart Networking, VE.Direct Safety Standards: IEC-62477-1 EMC Compliance: EN 300 328, EN 301 489-1, EN 301 489-17, FCC (47 CFR part 15, class B, IES-001) Automotive Directive: ECE R10-6 Applications: Dual battery systems, 4WD vehicles, caravans, campers, marine vessels Environment: Harsh outdoor, dust, water spray, salt air environments Compatible With / Goes Well With Victron SmartShunt Battery Monitors - Complete system monitoring with state of charge tracking Victron Color Control GX / Cerbo GX - Centralized system display and control panel Victron LiFePO4 Smart Batteries - Optimized charging profiles for Victron lithium batteries AGM & Gel Deep Cycle Batteries - Perfect charging for auxiliary battery banks Solar Charge Controllers - Integrate with solar systems for complete off-grid power Battery Protect Units - Additional load disconnect protection for auxiliary circuits Smart Battery Sense - Remote voltage and temperature sensing for precise charging BMV Battery Monitors - Track battery performance and charging efficiency Anderson Plug Connectors - Professional DC connection systems Circuit Breakers & Fuses - Essential overcurrent protection for installation Marine Switchboards - Complete electrical distribution in boats and yachts 4WD Dual Battery Systems - Foundation component for auxiliary power systems Caravan & Motorhome Electrical Systems - Reliable house battery charging while driving Work Vehicle Auxiliary Power - Commercial and fleet vehicle battery management Installation Applications: 4WD Dual Battery Systems: Essential for touring 4WDs with auxiliary battery setups, protecting your starter battery while ensuring your house battery charges properly from modern smart alternators, enabling extended off-grid camping with fridges, lights, and accessories running reliably. Caravan & Camper Trailer Charging: Provides efficient alternator charging for caravan house batteries while towing, eliminating the limitations of basic VSR isolators and ensuring your batteries arrive at camp fully charged and ready for off-grid power demands. Marine Dual Battery Applications: Perfect for boats requiring isolated house and starter battery systems, the IP65 waterproof rating and salt-air resistant construction handle harsh marine environments while preventing alternator overload from hungry lithium house banks. Commercial & Fleet Vehicle Power: Ideal for work vehicles, utilities, and service trucks requiring auxiliary power for tools, equipment, and accessories, providing reliable battery management that reduces downtime and extends battery life in demanding commercial applications. Euro 5/6 Vehicle Conversions: Specifically engineered for modern vehicles with intelligent alternators that don't provide consistent charging voltage, the Orion XS voltage boost ensures proper charging of auxiliary batteries where traditional isolators fail completely. Frequently Asked Questions Why do I need a DC-DC charger instead of a battery isolator? Modern vehicles with Euro 5/6 smart alternators don't provide consistent high voltage needed to fully charge auxiliary batteries.  Will this work with lithium (LiFePO4) batteries? Absolutely! The Orion XS includes dedicated lithium charging profiles and critical low-temperature shutdown protection that prevents charging lithium batteries below freezing (which causes permanent damage). How does it protect my alternator from being overloaded? The configurable output current (1-50A adjustable) allows you to limit the charge current to match your alternator's capacity. Can I monitor and control it from my phone? Yes! The built-in Bluetooth Smart connects to the free VictronConnect App (iOS and Android) for complete remote monitoring and control.  Will it charge my house battery when the engine is off? No – and that's a good thing! The engine running detection automatically disconnects your house battery when the engine stops, preventing it from draining your starter battery.  Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy CIP134040020 - Precision Electrical Protection for Demanding Environments The Victron Energy CIP134040020 MIDI-fuse is a professional-grade electrical protection solution designed for automotive, marine, and 4WD applications. Sold in a convenient 5-piece package, these high-performance fuses offer exceptional reliability and precise current management for critical electrical systems. Victron Energy CIP134040020 Features & Benefits Ultra-Low Voltage Drop - Minimal 65 mV drop ensures maximum electrical efficiency Exceptional Low Resistance - 1.4 mΩ cold resistance maintains optimal current flow Precision Engineering - M6 mounting design for secure and reliable installation Multi-Application Versatility - Ideal for automotive, marine, and specialized electrical setups Technical Specifications: Material: High-performance electrical grade metal Current Rating: 40A Voltage Rating: 58V Hardware: 5 x MIDI-fuses per package Applications: Automotive electrical systems, marine electronics, 4WD electrical modifications Environment: Suitable for harsh automotive and marine conditions  Compatible With / Goes Well With Victron Energy electrical systems Automotive electrical management kits Marine electrical protection solutions 4WD electrical upgrade components Auxiliary battery systems Installation Applications: Vehicle Electrical Systems: Primary circuit protection Marine Electronics: Robust electrical safeguarding 4WD Electrical Modifications: Reliable current management Auxiliary Power Systems: Precise current control Aftermarket Electrical Upgrades: Professional-grade protection Frequently Asked Questions What makes these MIDI-fuses different from standard fuses? Victron Energy MIDI-fuses offer superior performance with ultra-low voltage drop (65 mV) and exceptional cold resistance (1.4 mΩ), providing maximum electrical efficiency and protection. Are these suitable for marine applications? Yes, these fuses are specifically designed to withstand harsh marine and automotive environments, making them ideal for marine electrical systems. How many fuses are in a package? Each package contains 5 MIDI-fuses, providing excellent value and backup for critical electrical components. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy CIP134050020 - High-Performance Electrical Protection Solution The Victron Energy CIP134050020 MIDI-fuse represents cutting-edge electrical protection designed for professional automotive, marine, and 4WD applications. Packaged conveniently in a 5-piece set, these high-precision fuses deliver exceptional current management and reliability for the most demanding electrical systems. Victron Energy CIP134050020 Features & Benefits Extreme Low Voltage Drop - Minimal 65 mV drop ensures maximum electrical efficiency Ultra-Low Cold Resistance - 1 mΩ resistance maintains optimal current flow Precision M6 Mounting - Secure, reliable installation for critical electrical components Professional-Grade Versatility - Ideal for high-performance automotive and marine applications Technical Specifications: Type: MIDI Fuse Material: High-performance electrical grade metal Current Rating: 50A Voltage Rating: 58V Hardware: 5 x MIDI-fuses per package Applications: Automotive electrical systems, marine electronics, 4WD electrical modifications Environment: Engineered for harsh automotive and marine conditions Packaging: Protective commercial packaging Compatible With / Goes Well With Victron Energy electrical management systems Advanced automotive electrical kits Marine electrical protection solutions 4WD electrical upgrade components High-performance auxiliary battery systems Professional electrical modification setups Installation Applications: High-Performance Vehicle Electrical Systems: Advanced circuit protection Marine Electronics: Robust electrical safeguarding 4WD Electrical Modifications: Reliable high-current management Auxiliary Power Systems: Precise current control Professional Electrical Upgrades: Precision protection for demanding applications Frequently Asked Questions What sets these 50A MIDI-fuses apart from standard fuses? These Victron Energy MIDI-fuses offer superior performance with an incredibly low 65 mV voltage drop and exceptional 1 mΩ cold resistance, providing maximum electrical efficiency and protection. Can these fuses be used in marine environments? Absolutely. These fuses are specifically designed to withstand harsh marine and automotive conditions, making them ideal for marine and professional electrical systems. How many fuses come in each package? Each package contains 5 high-performance MIDI-fuses, offering excellent value and backup for critical electrical components. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy CIP134060020 - Precision High-Current Electrical Protection The Victron Energy CIP134060020 MIDI-fuse is a professional-tier electrical protection solution engineered for high-demand automotive, marine, and 4WD applications. Delivered in a strategic 5-piece package, these advanced fuses provide exceptional current management for the most challenging electrical configurations. Victron Energy CIP134060020 Features & Benefits Minimal Voltage Drop - Precisely engineered 70 mV drop maintains electrical system integrity Exceptional Low Resistance - Ultra-low 0.9 mΩ cold resistance ensures optimal current flow Robust M6 Mounting Design - Secure, reliable installation for critical high-current applications Versatile Performance - Ideal for demanding automotive, marine, and specialized electrical setups Technical Specifications: Type: MIDI Fuse Material: High-performance electrical grade metal Current Rating: 60A Voltage Rating: 58V Hardware: 5 x MIDI-fuses per package Applications: High-performance automotive electrical systems, marine electronics, 4WD electrical modifications Environment: Engineered for extreme automotive and marine conditions Compatible With / Goes Well With Victron Energy advanced electrical management systems High-performance automotive electrical kits Marine electrical protection solutions 4WD heavy-duty electrical upgrade components Professional-grade auxiliary battery systems Extreme electrical modification setups Installation Applications: High-Current Vehicle Electrical Systems: Advanced circuit protection Marine Heavy-Duty Electronics: Robust electrical safeguarding 4WD Extreme Electrical Modifications: Reliable high-current management Professional Auxiliary Power Systems: Precise current control Extreme Electrical Upgrades: Precision protection for demanding applications Frequently Asked Questions What makes these 60A MIDI-fuses unique? These Victron Energy MIDI-fuses deliver exceptional performance with an advanced 70 mV voltage drop and incredibly low 0.9 mΩ cold resistance, providing maximum electrical efficiency for high-current applications. Are these suitable for marine environments? Yes, these fuses are specifically engineered to withstand harsh marine and automotive conditions, making them ideal for professional marine and automotive electrical systems. How many fuses are included in each package? Each package contains 5 high-performance MIDI-fuses, offering excellent value and critical backup for demanding electrical components. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy CIP138250020 – Reliable 250A/80V MEGA Fuse (5 Pack) The Victron Energy CIP138250020 MEGA Fuse delivers robust circuit protection for high-current applications in automotive, marine, 4WD, and caravan setups. Designed to handle demanding conditions, this 250A/80V fuse ensures your system stays protected against overloads and short circuits. Built for professional installers and serious DIYers, this pack of 5 MEGA fuses offers outstanding reliability and peace of mind for any power distribution system. Victron Energy CIP138250020 Features & Benefits High Current Protection – Rated at 250A/80V, ideal for large DC systems in vehicles, caravans, and boats. Low Voltage Drop – Approx. 110mV drop for efficient performance with minimal energy loss. Durable Construction – Engineered by Victron Energy for long-lasting reliability in tough environments. Multi-Pack Convenience – Comes in a package of 5, ensuring you always have spares on hand. Trusted Brand – Backed by Victron Energy’s global reputation in power and electrical systems. Technical Specifications: Type: Fuse Material: Metal alloy fuse element with durable plastic housing Approx. Voltage Drop: 110 mV Cold Resistance: 0.208 mΩ Hardware: Supplied as a pack of 5 fuses (holders not included) Applications: Automotive, marine, caravan, 4WD, and industrial power systems Environment: Suitable for harsh and high-vibration conditions Compatible With / Goes Well With Victron Energy MEGA Fuse Holders Victron Lynx Power In and Power Distribution Systems High-current inverters and DC systems Automotive and marine battery banks Installation Applications: 4WD & Caravan Power Systems: Protect high-current auxiliary and battery management circuits. Marine Installations: Reliable fuse protection for onboard DC power distribution. RV and Camper Vans: Safeguard inverters, chargers, and solar setups. Industrial Equipment: Heavy-duty current protection for machinery and off-grid systems. Automotive Applications: Suitable for dual battery setups, winches, and aftermarket electronics. Frequently Asked Questions Can this fuse be used with Victron Lynx systems? Yes, the MEGA Fuse 250A is fully compatible with Victron Lynx power distribution modules and MEGA fuse holders. How many fuses are included in this product? This listing is for a factory-sealed pack of 5 MEGA fuses. Do I need a specific fuse holder for these? Yes, these fuses are designed to be used with MEGA fuse holders (sold separately). Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Advanced Lithium Power Solution for Demanding Applications The Victron Energy Lithium SuperPack 12.8V/100Ah battery represents the pinnacle of portable power technology. Designed for off-grid solar, marine, RV, and professional vehicle applications, this LiFePO4 battery delivers exceptional performance, safety, and reliability with an integrated Battery Management System (BMS) that simplifies installation and protects your investment. Key Specifications Chemistry: Lithium Iron Phosphate (LiFePO4) Nominal Voltage: 12,8V Capacity: 100Ah Nominal Energy: 1280Wh Cycle Life: 2500 cycles at 80% Depth of Discharge Parallel Configurable: Yes (Unlimited) Victron Energy BAT512110712 Features & Benefits Integrated Safety Switch: Automatic disconnection during over/undercharge or temperature extremes Abuse-Proof Design: Prevents premature battery failure from sulfation High Efficiency: 92% round-trip energy efficiency Flexible Deployment: Easily connectable in parallel configurations Wide Operating Range: Discharge from -20°C to +50°C Low Maintenance: No additional components required for installation Technical Specs Max Continuous Discharge Current: 100A Peak Discharge Current: 150A End of Discharge Voltage: 10V Charge Voltage Range: 14,2V-14,4V Max Charge Current: 100A Protection Rating: IP43 Dimensions: 220 x 330 x 172 mm Compatible With / Goes Well With Off-Grid Solar Systems Marine Electrical Setups RV Power Installations Backup Power Solutions Renewable Energy Projects Professional Vehicle Electrical Systems Frequently Asked Questions Can I connect multiple batteries? Yes, unlimited parallel connection is supported. What makes this battery different from lead-acid? Superior efficiency, longer lifespan, and advanced safety features. Is it suitable for solar applications? Ideal for off-grid and solar energy storage systems. How long will the battery last? Up to 2500 cycles at 80% depth of discharge. Can it handle extreme temperatures? Operates reliably from -20°C to +50°C. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less