Motobatt 12V 8.6Ah 165CCA AGM Motorcycle Batt W/ Quadflex Technology: A Motobatt Battery Is a Battery You Can Rely On!
Motorcycle Battery With Quadflex Technology
Motobatt Quadflex batteries, the first and unique 4 terminal system, propose the best balance between CCA and Amp hour capacity. By utilizing the wasted space inside a standard battery case, Motobatt maximizes the dimensions of the plates internally. Additionally, the plate grids are made thicker, and that with the additional density of the pasting improves the Amp Hour capacity, durability, and Cold-cranking Amps. Motobatt has completely changed the Powersport market by improving an old design.
Motobatt MBTZ10S Features:
20% More Amp Hour Capacity*
20% More Cold Cranking Amps*
Heavy Duty Pure Lead Calcium Cast Grids for high-strength
More Surface Area per Plate for Superior Performance and Longevity
Military Grade Absorbed Glass Matt Separators, Vibration Resistant
Multi Terminal Design, Easy to Add Accessories
Factory Activated, No Acid to Fill, Simply Check Charge & Go!
Extremely Low Self Discharge Rate
Motobatt MBTZ10S Specifications:
Voltage: 12
CCA: 165
Capacity (10HR): 8.6Ah
Weight: 2.90kg / 6.39Ibs
Dimensions (in / mm): L: 5.94(151) W: 3.43(87) H: 3.74(95)
Assembly Figure Terminal Locations: 4
Terminals: 2, M6x2.5 (Part#MPT2)
Screws: 4, M6X7 (Part#2xMPS2)
Allen Wrench: 1, 4x4 (Part#MPAK2)
Terminal Caps: 4, 12x5.5 (Part#2xMPC2)
Vehicle Compatibility:
HONDA TR200 Fat Cat (87) - 200CC
HONDA VT600C, CD Shadow Deluxe (04-07) - 600CC
HONDA CBR600F4i, 600RR (01-12) - 600CC
HONDA CB900F(919) (02-06) - 919CC
HONDA CBR929RR, RE (00-01) - 929CC
HONDA CBR954RR (02-03) - 954CC
HONDA CB1000R (09-12) - 1000CC
HONDA CBF1000F (09-12) - 1000CC
HONDA CBR1000RR (04-07) - 1000CC
KAWASAKI EX250, Ninja 250R (08) - 250CC
YAMAHA YZF-R6 (Excl. R6S) (06-12) - 600CC
YAMAHA FZ8 (11-12) - 800CC
YAMAHA YZF-R1 (04-12) - 1000CC
APRILIA RSV4 R, Factory (09-12) - 1000CC
APRILIA Turono VR4 (11-12) - 1000CC
APRILIA RXV550 (-10) - 550CC
APRILIA SVX550 (-10) - 550CC
APRILIA RXV450 (-10) - 450CC
APRILIA SVX450 (-10) - 450CC
BMW S1000RR (09-12) - 1000CC
KTM Duke (09-12) - 690CC
KTM Supermoto (09-12) - 690CC
KTM Enduro R (09-12) - 690CC
KTM Duke II, LC4, Adventure (03-08) - 640CC
KTM SMC, SXC (03-09) - 625CC
MV AGUSTA F4 (05-10) - 1000CC
MV AGUSTA Brutale 1078RR (09-10) - 1000CC
MV AGUSTA Brutale (06-09) - 910CC
MV AGUSTA F4, Brutale (00-08) - 750CC
KASEA KS, KU Models (All Years) - 65CC
KASEA KS, KU Models (All Years) - 90CC
KASEA KS, KU Models, Adventure Buggy (All Years)
KASEA Skyhawk 150, Adventure Buggy (All Years) - 150CC
KASEA Skyhawk 170 (All Years) - 170CC
KASEA Skyhawk 250 (All Years) - 250CC
SUZUKI LT-Z90 QuadSport (07-11) - 90CC
SUZUKI LT-R450 QuadRacer (06-11) - 450CC
YAMAHA YFM35R Raptor (04-12) - 350CC
YAMAHA Sp500 T-Max (09-12) - 500CC
YAMAHA Morphous (06-07) - 250CC
YAMAHA Maxam (-12) - 250CC
YAMAHA YJ125T Vino 125 (04-09) - 125CC
E-TON Sport 50 (-12) - 50CC
E-TON Sport 150 (-12) - 150CC
KYMCO People S 200 (-11) - 200CC
KYMCO People S 150 (09-12) - 150CC
KYMCO Super 8 150 (09-12) - 150CC
KYMCO People S 125 (09-10) - 125CC
KYMCO Super 8 (09-12) - 50CC
KYMCO People S 50 (09-10) - 50CC
KYMCO Agility 50 (09-12) - 50CC
SYM Fiddlell 125 (10-11) - 125CC
SYM Fiddlell 50 (10-12) - 50CC
SYM SYMply50 (10-11) - 50CC
SYM MIO 50 (10-12) - 50CC
Legendary Products & Support From Authorized Dealers
When you choose MotoBatt, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized MotoBatt dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by MotoBatt's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized MotoBatt dealer today!
Motobatt 12V 2.3Ah 40CCA AGM Motorcycle Battery With Quadflex Technology: A Battery You Can Rely On!
Motorcycle Battery With Quadflex Technology
Motobatt Quadflex batteries, the first and unique 4 terminal system, propose the best balance between CCA and Amp hour capacity. By utilizing the wasted space inside a standard battery case, Motobatt maximizes the dimensions of the plates internally. Additionally, the plate grids are made thicker, and that with the additional density of the pasting improves the Amp Hour capacity, durability, and Cold-cranking Amps. Motobatt has completely changed the power sports market by improving old designs.
Motobatt MBT4BB Features:
20% More Amp Hour Capacity*
20% More Cold Cranking Amps*
Heavy Duty Pure Lead Calcium Cast Grids For High Strength
More Surface Area per Plate for Superior Performance & Longevity
Military Grade Absorbed Glass Matt Separators, Vibration Resistant
Multi Terminal Design, Easy to Add Accessories
Factory Activated, No Acid to Fill, Simply Check Charge & Go!
Extremely Low Self Discharge Rate
Motobatt MBT4BB Specifications:
Voltage: 12V
CCA: 40
Capacity (10HR): 2.5Ah
Assembly Figure Terminal Locations: 2
Terminals: 2 Spade
Dimensions: (L) 113mm x (W) 38mm x (H) 87mm
Weight: 1.05kg
Vehicle Compatibility:
Suzuki DR-Z70 - 70CC (2008 - 2009)
Yamaha TTR50E - 50CC (2006 - 2007)
Yamaha TTR90E Electric Start - 90CC (2003 - 2007)
Yamaha SR400 - 400CC (2001 - 2009)
Yamaha SR400 FI - 400CC (2010 - 2012)
Legendary Products & Support From Authorized Dealers
When you choose MotoBatt, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized MotoBatt dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by MotoBatt's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized MotoBatt dealer today!
CTEK 400mm Long x 10.4mm Comfort Connect M10 Eyelet Hardwire Lead: A Practical Quick Connector for those with Batteries that are Difficult to Access or are Hidden
CTEK 56-329 Features:
Model: 56-329
Connection: M10 10.5mm Eyelet
Lead Length: 400mm
Inline Fuse
Choose M6 for smaller batteries like a motorcycle/lawn tractor.
Choose M8 for top post batteries.
Choose M10 for side post batteries.
Legendary Products & Support From Authorized Dealers
When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized CTEK dealer today!
Thunder TDR02104 4 Amp 8 Stage Pulse Battery Charger
A 4 amp 8 stage pulse battery charger from Thunder, the TDR02104 is perfect for small, low amp 12 volt recreational vehicles and agricultural equipment such as personal watercraft and lawn mowers, using pulse mode technology to extend battery life.
Product overview
Perfect for small, low amp 12 volt recreational vehicles and agricultural equipment such as personal watercraft and lawn mowers. Features pulse mode technology to reduce oxidation, maintain electrolyte consistency, and combat stratification, which equates to longer battery life.
Features and benefits
Pulse mode technology: Reduces oxidation, maintains electrolyte consistency, and combats stratification for longer battery life.
8 stage charging: Provides a comprehensive charging cycle suited to Gel, Lead Acid, AGM, and Calcium batteries.
Multi safety protection: Includes overcharging, reverse polarity with flashing LED indication, short circuit, and over temperature protection.
Wide operating temperature range: Operates reliably across a -15°C to +50°C temperature range.
Suited to small recreational and agricultural batteries: Ideally suited to batteries rated 6-70Ah or 50-200 CCA, such as those used in personal watercraft and lawn mowers.
CE, EMC, SAA, and C-Tick approved: Certified to relevant safety and compliance standards.
Technical specs
Specification
Detail
SKU
TDR02104
Brand
Thunder
Type
8 Stage Pulse Battery Charger
Input Voltage
240VAC/50Hz
Maximum Charging Current
4A
Minimum Start Voltage
≥0V
Operating Temperature
-15°C to +50°C
Ideal Battery Rating
6-70Ah, 50-200 CCA
Approvals
CE, EMC, SAA, C-Tick
Charging voltages
Battery Type
Charging Stage
Boost
Float
Gel
14.3V
14.8V
13.3V
Lead Acid/AGM
14.8V
15.2V
13.7V
Calcium
15.6V
16.2V
13.7V
Compatible with
The TDR02104 is compatible with 12V batteries rated 6-70Ah or 50-200 CCA, including Gel, Lead Acid, AGM, and Calcium battery types. Suited to personal watercraft, lawn mowers, and other small recreational and agricultural equipment.
Frequently asked questions
What battery types is the TDR02104 compatible with?The TDR02104 is compatible with Gel, Lead Acid, AGM, and Calcium battery types, with charging voltages tailored to each chemistry.
What is the maximum charging current of the TDR02104?The TDR02104 has a maximum charging current of 4A.
What battery sizes is the TDR02104 suited to?The TDR02104 is ideally suited to batteries rated 6-70Ah or 50-200 CCA.
What safety protections does the TDR02104 include?The TDR02104 includes overcharging protection, reverse polarity protection with a flashing LED, short circuit protection, and over temperature protection.
What is pulse mode technology?Pulse mode technology reduces oxidation, maintains electrolyte consistency, and combats stratification within the battery, extending overall battery life during charging and maintenance.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Projecta IS2000 12/24V 2000A Jump Starter
A 12/24V 2000A jump starter from Projecta, the IS2000 features rapid recharge technology, automatic voltage detection, and a set and forget docking station, starting large 12V and 24V vehicles up to 8.0L petrol and 7.0L diesel.
Product overview
The Projecta IS2000 features rapid recharge technology, recharging the jump starter from the vehicle in just 40 seconds. With automatic voltage detection and a set and forget docking station, the IS2000 starts large 12V and 24V vehicles up to 8.0L petrol and 7.0L diesel.
Features and benefits
Rapid recharge technology: Recharges the jump starter from the vehicle in just 40 seconds, keeping the unit ready for repeated use.
LCD colour screen: Displays charging and jump start status information at a glance.
Automatic voltage detection: Automatically detects whether the connected vehicle is 12V or 24V.
Set and forget docking station: Provides convenient storage and charging without requiring manual monitoring.
No solder high current connections: Provides reliable, durable high current connections without soldered joints.
High clamp current output: Provides 750A maximum current at 12V, or 500A maximum current at 24V.
Technical specs
Specification
Detail
Part Number
IS2000
Brand
Projecta
Type
Lithium Jumpstarter
Voltage
12V or 24V
Amps
2000A
Battery Type
Lithium
Maximum Clamp Current (12V)
750A
Maximum Clamp Current (24V)
500A
Suitable for Vehicles
Up to 8.0L Petrol, Up to 7.0L Diesel
Warranty
2 Years
Compatible with
The IS2000 is compatible with large 12V and 24V petrol vehicles up to 8.0 litres and diesel vehicles up to 7.0 litres.
Frequently asked questions
What size vehicles is the IS2000 suitable for?The IS2000 starts large 12V and 24V vehicles up to 8.0L petrol and 7.0L diesel.
Does the IS2000 support both 12V and 24V vehicles?Yes. The IS2000 features automatic voltage detection, automatically identifying whether the connected vehicle is 12V or 24V.
What is rapid recharge technology on the IS2000?Rapid recharge technology recharges the jump starter from the vehicle in just 40 seconds.
What is the maximum clamp current of the IS2000?The IS2000 provides 750A maximum current at 12V or 500A maximum current at 24V.
What warranty does the IS2000 come with?The IS2000 is backed by a two-year warranty.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
CTEK CTIND384 (56-384) - Comfort Indicator Clamps 1M Cable
Convenient LED battery charge level indicator with quick-connect clamps for instant 12V battery status monitoring. The CTEK Comfort Indicator Clamps 1M Cable provides easy-to-use visual battery charge level assessment through intuitive LED 'traffic light' system allowing quick verification of battery state without complex testing equipment or voltage meters. Featuring tough durable clamps for quick and easy connection to 12V car and motorcycle batteries, this handy indicator gives immediate visual feedback showing whether battery is fully charged (green), needs charging soon (amber), or requires immediate charging (red), eliminating guesswork in battery maintenance and preventing unexpected failures. The CTEK Comfort Indicator features CTEK's unique CONNECT system enabling rapid attachment to CTEK battery chargers providing convenient access point for charging without disconnecting indicator clamps, ideal for batteries in difficult-to-reach locations or vehicles requiring regular monitoring. The 1-meter cable length provides flexible positioning allowing indicator to be mounted in visible location while clamps connect to battery terminals in engine bay, under seats, or storage compartments. Perfect for monitoring seasonal vehicles including motorcycles, classic cars, caravans, boats, and stored vehicles requiring periodic charge verification, workshop applications where quick battery status checks are needed across multiple vehicles, and DIY enthusiasts wanting simple reliable battery monitoring without investing in expensive testing equipment. Compatible with all 12V lead-acid batteries including wet/flooded, maintenance-free, AGM, and gel types, this practical accessory helps extend battery life through timely charging intervention, prevents sulfation damage from extended low-charge storage, and provides peace of mind that batteries are maintained at optimal charge levels. Distributed by Bainbridge Technologies, Australia's leading power product experts with over 30 years of experience in DC power solutions, backed by comprehensive technical support and local warranty coverage.
Product Overview
CTEK Comfort Indicator Clamps 1M Cable is easy to use. LED battery charge level indicator with clamps for 12V car and motorcycle batteries.
The CTEK Comfort Indicator Clamps 1M Cable is an easy to use LED indicator that lets you quickly check the state of your battery. It features tough, durable clamps for quick and easy connection to the battery and the simple LED 'traffic light' system will give you an immediate indication of your battery charge level, so you know when it needs charging. The CTEK INDICATOR CLAMP features CTEK's unique CONNECT system so it can be quickly attached to a CTEK charger and give you easy access to the battery.
Important Notes:
12V Lead-Acid Batteries Only: Designed exclusively for 12V lead-acid battery systems including wet/flooded, maintenance-free, AGM, and gel batteries. Not compatible with 6V batteries, 24V systems, or lithium batteries (LiFePO4, Li-ion). Using with incompatible battery types may produce inaccurate readings or damage indicator electronics. For lithium battery monitoring, consult battery manufacturer for appropriate voltage indicators.
Visual Indicator, Not Precision Meter: The LED traffic light system provides quick approximate battery charge status (good/marginal/low) but is not precision voltage measurement tool. Green LED indicates satisfactory charge (typically above 12.5V), amber indicates marginal charge requiring attention (approximately 12.2-12.5V), red indicates low charge requiring immediate charging (below 12.2V). For precise voltage measurements, use digital multimeter. Indicator readings may be affected by battery surface charge, temperature, and load conditions.
CTEK CONNECT System Compatibility: Features CTEK's proprietary CONNECT system allowing direct attachment to CTEK battery chargers equipped with matching CONNECT eyelet or connector. This enables charging through indicator clamps without disconnection. Compatible with CTEK chargers featuring CONNECT accessories including MXS 5.0, MXS 10, CT5 TIME TO GO, and other CONNECT-compatible models. Not compatible with chargers lacking CONNECT system.
Not for Permanent Installation: Clamp design intended for temporary connection and periodic monitoring, not permanent installation. For permanent monitoring or charging access, use CTEK COMFORT CONNECT eyelet connector (sold separately) which bolts to battery terminals allowing quick-disconnect access. Clamps should not be left connected during vehicle operation as vibration may cause loosening or arcing.
Clean Terminal Connection Essential: Battery terminals must be clean and free from corrosion for accurate readings and reliable connection. Dirty or corroded terminals prevent proper electrical contact causing incorrect LED indications or intermittent operation. Clean terminals with wire brush before attaching clamps. Ensure clamps firmly grip terminals - loose connections provide misleading readings.
Key Features
LED Traffic Light Indicator System - Intuitive red/amber/green LED display provides instant visual battery charge level assessment without voltage meters or complex interpretation.
Quick-Connect Battery Clamps - Tough durable clamps attach quickly and securely to battery terminals enabling fast status checks without tools or permanent installation.
1 Meter Cable Length - Flexible cable positioning allows indicator display in visible location while clamps connect to battery in engine bay or storage compartments.
CTEK CONNECT System Integration - Proprietary CONNECT system enables direct attachment to compatible CTEK battery chargers for convenient charging access point.
12V Battery Compatibility - Works with all 12V lead-acid battery types including wet/flooded, maintenance-free, calcium-calcium, AGM, and gel batteries.
Car and Motorcycle Applications - Suitable for automotive batteries, motorcycle batteries, and small vehicle batteries requiring periodic charge monitoring.
No Battery Disconnection Required - Check battery status without disconnecting terminals preserving vehicle settings, radio codes, and ECU memory.
Instant Status Indication - Immediate LED feedback shows battery condition within seconds of connection eliminating waiting for test results.
Durable Construction - Robust clamps and cable withstand repeated connections, workshop use, and outdoor environmental exposure.
Seasonal Vehicle Monitoring - Ideal for stored vehicles, classic cars, motorcycles, boats, and caravans requiring periodic charge verification during storage.
Workshop Efficiency Tool - Quick status checks across multiple vehicles in service bays or fleet maintenance operations without dedicated testing equipment.
Prevents Sulfation Damage - Regular monitoring identifies low-charge conditions enabling timely charging preventing permanent sulfation damage to battery plates.
Peace of Mind Storage - Visual confirmation that stored vehicle batteries maintain optimal charge levels throughout off-season storage periods.
DIY-Friendly Operation - Simple plug-and-check operation requires no technical knowledge or training for accurate battery status assessment.
Compact Portable Design - Lightweight compact indicator easily stored in toolbox, glove compartment, or workshop drawer for convenient access.
CTEK Quality Engineering - Swedish-designed precision indicator from globally recognized battery charging and maintenance technology leader.
Bainbridge Technologies Support - Distributed by Australia's leading power product experts providing local technical support and warranty coverage.
Technical Specifications
Specification
Details
Brand
CTEK
Product Type
Battery Charge Level Indicator with Clamps
SKU
CTIND384 (56-384)
Part Number
56-384
Battery Voltage
12V DC Systems
Battery Chemistry
Lead-Acid (Wet, Maintenance-Free, AGM, Gel)
Indicator Type
LED Traffic Light System (Red/Amber/Green)
Cable Length
1 Meter (1000mm)
Connection Type
Battery Clamps (Spring-Loaded)
CTEK CONNECT System
Yes (Compatible with CTEK CONNECT Chargers)
Installation Type
Temporary Connection (Clamp-On)
Charging Access
Yes (When Connected to CTEK CONNECT Charger)
LED Indicators
3-Color Status Display
Green LED
Battery Fully Charged / Good Condition
Amber LED
Battery Marginal Charge / Needs Attention
Red LED
Battery Low Charge / Requires Immediate Charging
Typical Voltage Thresholds
Green: >12.5V, Amber: 12.2-12.5V, Red: <12.2V
Applications
Cars, Motorcycles, Caravans, Boats, Stored Vehicles
Operating Temperature
To be determined
Storage Temperature
To be determined
Clamp Material
Durable Metal with Insulated Grips
Product Weight
0.15kg
Product Dimensions
210 x 120 x 30mm (packaged)
Distributor
Bainbridge Technologies (Australian Owned)
Warranty
Standard Manufacturer Warranty (Bainbridge Technologies)
Frequently Asked Questions
Q: What do the different LED colors mean and how accurate are they?
A: The traffic light LED system provides approximate battery charge status: Green LED indicates battery is fully charged or in good condition (typically above 12.5V resting voltage), Amber LED indicates battery has marginal charge and should be charged soon (approximately 12.2-12.5V), Red LED indicates battery is low and requires immediate charging (below 12.2V). These are approximate thresholds - exact voltage points may vary slightly. The indicator provides quick status assessment, not precision voltage measurement. For most accurate reading, allow battery to rest 2-4 hours after charging or vehicle use to dissipate surface charge before checking. Temperature affects battery voltage (colder = lower voltage reading) so consider seasonal conditions when interpreting results.
Q: Can I leave this connected permanently or use it while driving?
A: No, the Comfort Indicator Clamps are designed for temporary connection and periodic monitoring, not permanent installation. Do not leave connected during vehicle operation as: (1) Vibration may cause clamps to loosen creating arcing, sparks, or electrical shorts, (2) Clamps may accidentally contact metal vehicle components causing shorts, (3) Cable may become tangled in moving engine components. For permanent monitoring or charging access, use CTEK COMFORT CONNECT eyelet connector (sold separately) which bolts securely to battery terminals. Eyelet connectors are designed for permanent installation with quick-disconnect capability for indicator or charger attachment.
Q: How does the CTEK CONNECT system work for charging?
A: The CTEK CONNECT system allows you to charge battery through the indicator clamps without disconnecting them. Process: (1) Connect indicator clamps to battery terminals, (2) Plug compatible CTEK charger's CONNECT cable into indicator's CONNECT port, (3) Charger delivers power through indicator to battery. This is convenient for batteries in difficult-to-reach locations (motorcycle batteries under fairings, marine batteries in compartments) where you don't want to remove panels repeatedly for charging. The CONNECT system only works with CTEK chargers featuring CONNECT accessories - not all CTEK chargers have this capability. Check charger compatibility before purchasing for this purpose.
Q: Will this work on my AGM battery, gel battery, or motorcycle battery?
A: Yes, the CTEK Comfort Indicator Clamps work with all 12V lead-acid battery types including conventional wet/flooded batteries, maintenance-free batteries, AGM (Absorbed Glass Mat) batteries, and gel batteries. It's equally suitable for large car batteries and small motorcycle batteries - the voltage thresholds are the same regardless of battery size or type. However, it does NOT work with lithium batteries (LiFePO4, Li-ion) which have different voltage characteristics requiring specific lithium battery monitors. The indicator is particularly useful for motorcycle batteries which are often in hard-to-reach locations and benefit from quick status checks without removing fairings or seats.
Q: Why does the indicator show red even after I've charged the battery?
A: Several possible causes: (1) Surface charge not dissipated - immediately after charging, battery has temporary voltage elevation. Allow 2-4 hours rest, then retest. (2) Battery sulfated or damaged - old or neglected batteries lose capacity and won't hold full charge even after charging. Battery may need replacement. (3) Charger insufficient - battery may require longer charging time or higher-capacity charger. (4) Poor clamp connection - dirty terminals or loose clamps cause voltage drop. Clean terminals thoroughly and ensure firm connection. (5) Battery under load - if vehicle accessories drawing current during testing, voltage drops. Turn off all loads before testing. (6) Defective battery - internal cell failure prevents charging. If battery repeatedly shows red after proper charging, likely needs replacement. Use CTEK Battery Analyzer for comprehensive diagnosis.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
CTEK 12V 25A Battery Charger: 25A Charger and Power Supply for Workshops and Showrooms
Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the individual battery. The PRO25S has a dedicated lead-acid battery reconditioning programme to restore battery life & recondition flat batteries. SUPPLY mode will support the battery during diagnostic or fault-finding work. It has low voltage & current ripple, so it's safe for the battery & the vehicle's delicate electronic systems. Fully automatic & easy to use, it's also very simple to connect, spark proof and reverse-polarity protected to protect the user & also the battery. The PRO25S is designed to ensure easy handling in both the workshop & the showroom. Whilst it's lightweight & portable, the rugged, impact-resistant casing means it can also handle the toughest workshop environment.
CTEK PRO25S Features:
Integrated safety features, so it's safe for the battery & the vehicle.
Built-in temperature sensor to achieve maximum charge levels
Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries.
IP44 classified for outdoor use
Lightweight & highly portable
Tough & robust
CTEK PRO25S Specifications:
Battery capacity: 40–500 Ah, lead-acid battery types. 30–450 Ah, LiFePO‚ÇÑ.
Charging category: AC charging
Back current drain*: Corresponding to less than 1Ah/month
Back Current Drain, details: *) Back current drain is the current that drains the battery if the charger is not connected to the mains CTEK chargers have a very low back current.
Battery voltage: 12V
Battery chemistry: Lead acid; Lithium-ion
Ambient operating temperature: -20°C to +50°C
Cooling: Fan
Start voltage: 2.0V
Input: 220–240 VAC, 50–60Hz, 2.9A
Ripple**: Less than 4 %
Output : 14.4/15.8/13.6V, 25 A, lead-acid battery types. 13.8V/14.4V/13.3V, 25A, LiFePO‚ÇÑ.
Ripple, details: **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low
Battery types: 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO‚ÇÑ
Degree of protection: IP44Gross weight (unit in box): 2.2kg
Dimensions (L x W x H): 235 x 130 x 65mm
Charging cable length (output): 2m
Net weight (unit with cables): 1.8kg
Legendary Products & Support From Authorized Dealers
When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized CTEK dealer today!
Thunder TDR17012 12V 150A Battery Monitor
A 150A battery monitor from Thunder, the TDR17012 monitors time to empty, battery percentage, current draw, current inwards, and wattage usage on battery banks up to 590Ah.
Product overview
Monitor time to empty, battery percentage, current draw, current inwards, and wattage usage on battery banks up to 590Ah. A 1.5m extension lead is also available separately as the TDR17013.
Features and benefits
Comprehensive battery monitoring: Displays time to empty, battery percentage, current draw, current inwards, and wattage usage from a single unit.
Suits battery banks up to 590Ah: Provides monitoring capacity suited to larger dual and multi-battery installations.
150A shunt operating current: Provides substantial current measurement capacity for demanding electrical systems.
Backlit display: Provides clear visibility of battery status in a range of lighting conditions.
Extension lead available separately: A 1.5m extension lead, TDR17013, is available for installations requiring additional cable length between the monitor and shunt.
Technical specs
Specification
Detail
SKU
TDR17012
Brand
Thunder
Type
Battery Monitor
Operating Voltage
8-60VDC
Working Power
8-10mA
Standby Power Consumption
0.5-0.8mA
Voltage Acquisition Accuracy
±1.0%
Current Acquisition Accuracy
±1.0%
Ambient Temperature Range
0-45°C
Backlit Light Current
40-50mA
Battery Capacity
Maximum 590Ah
Built-In Current
5-10A
Shunt Operating Current
150A
Outside Unit Dimensions (W x H x D)
66mm x 40mm x 10mm
Display Window Size (W x H)
32mm x 23mm
External Shunt Dimensions (W x H x D)
23mm x 18mm x 5mm
Compatible with
The TDR17012 is compatible with 12V battery banks up to 590Ah. A 1.5m extension lead is available separately as the Thunder TDR17013.
Frequently asked questions
What is the maximum battery capacity the TDR17012 can monitor?The TDR17012 can monitor battery banks up to a maximum of 590Ah.
What is the shunt operating current of the TDR17012?The TDR17012 has a shunt operating current of 150A.
What does the TDR17012 display?The TDR17012 displays time to empty, battery percentage, current draw, current inwards, and wattage usage.
Is an extension lead available for the TDR17012?Yes. A 1.5m extension lead is available separately as the Thunder TDR17013.
What operating voltage range does the TDR17012 support?The TDR17012 operates across an 8-60VDC range.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
CTEK 12V 15A Marine Battery Charger and Maintainer: Great Choice for the Marine Market and Boats! CTEK M200 is an 8 step, fully automatic primary switch mode battery charger. It is a great choice for the marine market and boats with batteries from 28-300Ah. Unlike old battery chargers, CTEK chargers are designed with a focus on simplicity, safety and flexibility. Marine batteries need special care as they are put under a lot of pressure. The batteries need to recover quickly to satisfy the needs and comfort of the boat owner. Fully automatic In addition to normal charging, CTEK M200 offers a fully automatic charging cycle with its patented system for pulse maintenance. CTEK M200 analyses the condition of the battery, charges when necessary and maintains the battery when the boat is not in use. No harmful galvanic currents CTEK M200 produces no harmful galvanic currents that cause corrosion which quickly damages various metal components under the boat, including propellers and ladders. Counteracts sulphation Unused batteries lose their power and their life is shortened through sulfation. It is also more difficult to charge sulfated batteries. The CTEK M200 has a patented method for reconditioning sulfated batteries. The charger analyzes the state of the battery and, if possible, recovers the battery and its power. Recondition the battery Using CTEK's unique RECOND mode can correct the acid stratification that often occurs in fully discharged batteries. The battery thereby has it is power restored and enjoys an extended service life. Designed for safety CTEK develops all of its battery chargers with safety in mind, for the user, for the battery and for the sensitive electronic equipment installed in all modern boats. CTEK M200 is non-sparking, reverse polarity protected as well as short-circuit-proof and it does no damage to the boat's electronic equipment either. Designed for a tough marine environment CTEK M200 is IP44 classed which means that it is approved for outdoor use. It charges equally well at –20°C as it does at +50°C thanks to the charging voltage being adapted to suit the temperature of the battery, and that the components and cables are of the highest possible quality. Silent night mode With the CTEK M200 there is no need to switch off the charger in order to sleep soundly. The practical and convenient NIGHT mode function now provides silent charging. Complete purchase guaranteed When buying a CTEK M200 there is a guaranteed complete purchase which means there is no need to buy any additional components or accessories. CTEK M200 Specifications: Model 1055 Voltage AC 220–240VAC, 50–60Hz. Charging voltage 14.4V Charging current 15A max. Current, mains 2.9A rms (at full charging current) Back Current Drain* <2Ah per month Current ripple** <4% Ambient temperature -20¬∞C – +50¬∞C Output power is automatically reduced at higher temperatures. Cooling Fan Charger type Eight-step, fully automatic Battery types All types of 12V lead-acid batteries (WET, MF, AGM and GEL). Battery capacity 28–300Ah, up to 500Ah for maintenance. Protection class IP44 (Outdoor use)*** Weight 1.4kg
Legendary Products & Support From Authorized Dealers
When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized CTEK dealer today!
Stinger SPT53501 PRO Series Battery Terminal Chrome Finish with 2x 4GA and 1x 8GA Cable Connections for Positive or Negative Use and Clear Perspex Cover
The SPT53501 from Stinger is a PRO series battery terminal in chrome finish, providing two 4 gauge and one 8 gauge cable connection ports. Unlike the SPT53102 and SPT53302 which are polarity-specific, the SPT53501 can be used on either the positive or negative battery post, providing flexibility in installation layout. A clear Perspex cover is included.
Product overview
The SPT53501 provides three independent cable connection ports across two gauges, suited to mid-level car audio and accessory installations where 4 gauge and 8 gauge power runs need to terminate cleanly at the battery post without stacking ring terminals. The flexibility to use the terminal on either the positive or negative post makes it a practical single-purchase solution for installations where a dedicated polarity-specific terminal is not required.
The chrome finish and clear Perspex cover deliver a premium appearance and protection for the connection points, consistent with the Stinger PRO series terminal range. The connection method details should be confirmed with us before ordering to ensure the correct tooling is available for the installation. Supplied as a single unit per pack.
Features and benefits
Multi-gauge battery terminal for positive or negative use: Three independent cable connection ports covering two 4 gauge and one 8 gauge connection, suitable for use on either the positive or negative battery post.
Suits positive or negative battery terminals: Unlike polarity-specific terminals, the SPT53501 can be installed on either the positive or negative battery post, providing flexibility in installation layout and configuration.
Chrome finish: The chrome finish provides a premium appearance consistent with the Stinger PRO series terminal range, suited to engine bay installations where terminal quality and aesthetics are part of the build standard.
Clear Perspex cover: The included clear Perspex cover protects the terminal connections from accidental contact and debris in the engine bay, contributing to long-term reliability and safety.
Technical specs
Specification
Detail
SKU
SPT53501
Brand
Stinger
Series
PRO
Terminal Type
Battery terminal
Polarity
Positive or negative
Cable Connections
2x 4GA, 1x 8GA
Finish
Chrome
Cover
Clear Perspex
Quantity
1 per pack
Frequently asked questions
Can the SPT53501 be used on both positive and negative battery posts?Yes. Unlike the SPT53102 (positive only) and SPT53302 (negative only), the SPT53501 is confirmed for use on either the positive or negative battery post, providing flexibility in installation layout and configuration.
What cable gauges does the SPT53501 accept?The SPT53501 provides two 4 gauge ports and one 8 gauge port, covering mid-level power and ground cable gauges suited to 4 gauge and 8 gauge amplifier wiring kit installations and accessory power distribution at the battery post.
How does the SPT53501 differ from the SPT53102 and SPT53302?The SPT53102 and SPT53302 are polarity-specific terminals (positive and negative respectively) with ports covering 0 gauge, 4 gauge, and 8 gauge connections, suited to high-powered installations with large gauge cable runs. The SPT53501 accepts 4 gauge and 8 gauge connections only and can be used on either post, making it more suited to mid-level installations where 0 gauge cable is not required and polarity flexibility is preferred.
Does the SPT53501 require a crimp tool for installation?Connection method details are not confirmed in the available source data for this product. Contact us before ordering to confirm whether the SPT53501 uses set screw or another connection method, and what tooling is required for correct installation.
What does the clear Perspex cover do?The clear Perspex cover protects the terminal connections from accidental contact with metal objects in the engine bay and shields the connection points from debris and moisture, contributing to long-term reliability and safety.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
CTEK 120A 12V Power Management System for Starter and Service Batteries: Power Management System for Starter and Service Batteries Smartpass 120S charges and supplies the service battery and equipment with 120A, separates critical equipment from non-critical equipment ensuring that radio, emergency lights and navigation systems always have power. Smartpass 120S is a 120A Power Management Solution which distributes, controls and maximises the available energy from your alternator to power service batteries and consumers. SMARTPASS 120S handles all 12V batteries between 28-800Ah. The Smartpass 120Ss Battery Guard function ensures that critical equipment such as radio, emergency lights and navigation systems always have power and take priority when the voltage on the service battery is low disconnecting non-critical consumers. The unit's Battery Guard will protect your service battery from total discharge and built in over temperature protection reduces charge current before the battery temperature gets too high. SMARTPASS 120S is compatible with the D250SA and D250SE 20A on board chargers. ✓Complete power management system✓Smart alternator compatible✓Battery guard protects what's important✓Built-in over-temperature protection✓Start assistance
CTEK SMARTPASS 120S Features: Battery separation eliminates diodes and VSR relays Fully automatic Maximizes battery life Battery Guard to protect your secondary battery from total discharge Dynamic over current protection to handle temporary inputs and outputs of up to 350A for fast charging Battery temperature protection for added safety Splash and dust proof (IP65) CTEK SMARTPASS 120S Specifications: Charging category DC charging Input 11.5–23 V, 120 A (350 A temporarily for 10 seconds) Output 120 A (350 A temporarily for 10 seconds) Battery chemistry Lead acid; Lithium-ion Battery types 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO‚ÇÑ Battery capacity 28–800 Ah Back current drain* Corresponding to less than 7 Ah/month Battery voltage 12 V Ambient operating temperature -20 °C to +50 °C (- 4 ¬∞F to +122 ¬∞F) Degree of protection IP65 Gross weight (unit in box) 0.9 kg Dimensions (L x W x H) 192 x 110 x 65 mm Net weight (unit with cables) 0.7 kg Warranty 2 years Part no. 40-289
Legendary Products & Support From Authorized Dealers
When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized CTEK dealer today!
