Batteries

1202 products

  • PIN122120500

    Victron Energy Victron Energy PIN122120500 12/1200 Phoenix Inverter VE.Direct NEMA 5-15R

    Victron Energy 12/1200 Phoenix Inverter VE.Direct NEMA 5-15R: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide ProductProven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years.The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.To transfer the load to another AC source: the automatic transfer switchFor our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will.continue to operate without disruption.Victron Energy PIN122120500 Features:Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage :210 - 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Specification: Cont. power at 25°C: 1200VA Cont. power at 25°C / 40°C: 1000 / 850W Peak power: 2200W Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% ; 50Hz or 60Hz +/- 0,1% Input voltage range: 9,2 - 17 DC low shut down (adjustable): 9,3 Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off, see DC low restart and alarm (adjustable): 10,9 Battery charged detect (adjustable): 14,0 Max. efficiency: 91 Zero-load power: 7 Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 1 ECO mode stop and start power setting: Adjustable Protection: a - f Operating temperature range: -40 to +65°C (fan assisted cooling) ; Derate 1,25% per °C above 40°C Humidity (non-condensing): max 95% Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $654.00

  • PIN122120200

    Victron Energy Victron Energy PIN122120200 12/1200 Phoenix Direct Schuko Pure Sinewave Inverter

    Victron Energy 12/1200 Phoenix Direct Schuko Pure Sinewave Inverter: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide ProductProven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.Victron Energy PIN122120200 Features:Fully configurable Low voltage alarm trip and reset levels Low voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50Hz or 60Hz ECO mode on/off and ECO mode sense level Monitoring In- and output voltage and alarms Specifications: Cont. power at 25°C: 1200VA Cont. power at 25°C / 40°C: 1000 / 850W Peak power: 2200W Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1% Input voltage range: 9,2 - 17 DC low shut down (adjustable): 9,3 Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off DC low restart and alarm (adjustable): 10,9 Battery charged detect (adjustable): 14,0 Max. efficiency: 90% Zero-load power: 6,5 Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 1 ECO mode stop and start power setting: Adjustable Protection: a - f Operating temperature range: -40 to +65°C (fan assisted cooling); Derate 1,25% per °C above 40°C Humidity (non-condensing): max 95% Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $654.00

  • PIN121800500

    Victron Energy Victron Energy PIN121800500 12/800 Phoenix Inverter VE.Direct NEMA 5-15R

    Victron Energy 12/800 Phoenix Inverter VE.Direct NEMA 5-15R: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide ProductProven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years.The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.To transfer the load to another AC source: the automatic transfer switchFor our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will.continue to operate without disruption.Victron Energy PIN121800500 Features:Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage :210 - 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Specification: Cont. power at 25°C: 800VA Cont. power at 25°C / 40°C: 650 / 560W Peak power: 1500W Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% ; 50Hz or 60Hz +/- 0,1% Input voltage range: 9,2 - 17 DC low shut down (adjustable): 9,3 Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off, see DC low restart and alarm (adjustable): 10,9 Battery charged detect (adjustable): 14,0 Max. efficiency: 90 Zero-load power: 6,5 Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 1 ECO mode stop and start power setting: Adjustable Protection: a - f Operating temperature range: -40 to +65°C (fan assisted cooling) ; Derate 1,25% per °C above 40°C Humidity (non-condensing): max 95% Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $447.00

  • PIN121800200

    Victron Energy Victron Energy PIN121800200 12/800 Phoenix Direct Schuko Pure Sinewave Inverter

    Victron Energy 12/800 Phoenix Direct Schuko Pure Sinewave Inverter: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide ProductProven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.Victron Energy PIN121800200 Features:Fully configurable Low voltage alarm trip and reset levels Low voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50Hz or 60Hz ECO mode on/off and ECO mode sense level Monitoring In- and output voltage and alarms Specifications: Cont. power at 25°C: 800VA Cont. power at 25°C / 40°C: 650 / 560W Peak power: 1500W Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1% Input voltage range: 9,2 - 17 DC low shut down (adjustable): 9,3 Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off DC low restart and alarm (adjustable): 10,9 Battery charged detect (adjustable): 14,0 Max. efficiency: 90% Zero-load power: 6,5 Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 1 ECO mode stop and start power setting: Adjustable Protection: a - f Operating temperature range: -40 to +65°C (fan assisted cooling); Derate 1,25% per °C above 40°C Humidity (non-condensing): max 95% Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $447.00

  • Sale -10% PIN121371300

    Victron Energy Victron Energy PIN121371300 Phoenix Inverter 12/375 230V VE.Direct AU/NZ

    Victron Energy Phoenix Inverter 12/375 230V VE.Direct AU/NZ: The Full Bridge With Toroidal Transformer Topology Has Proven Its Reliability Over Many YearsThe inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerIt is needed to start loads such as power converters for LED lamps, filament lamps, or electric tools.When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. It will switch on and check every few seconds, adjustable if the load has increased again.A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.VE.Direct communication port for further configurationThe VE. A direct port can be connected to a computer (via VE.Direct to USB interface cable) or Apple and Android smartphones, tablets, MacBooks, and other devices (via VE.Direct Bluetooth Smart dongle) for further configuration and monitoring:Victron Energy PIN121371300 Features: Low Battery Voltage Alarm Trip And Reset Levels Low Battery Voltage Cut-off And Restart Levels Dynamic Cut-off: Load Dependent Cut-off Level Output Voltage 210 - 245v Frequency 50 Hz Or 60 Hz Eco Mode On/Off and Eco Mode Sense Level Monitoring: In And Output Voltage, % Load And Alarms Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $211.90 $190.59

  • ORI241220160

    Victron Energy Victron Energy ORI241220160 240W 24/12-20 Orion IP67 DC-DC Converter

    Victron Energy 240W 24/12-20 Orion IP67 DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241220160 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 50mA DC output voltage: 12V +/- 3% Maximum continuous output current: 20A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure: Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 2,6mm² (13 AWG) Cable cross section, output: 2,6mm² (13 AWG) Weight (kg): 300 g Dimensions (h x w x d in mm): 74 x 74 x 32 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

  • ORI241210060

    Victron Energy Victron Energy ORI241210060 120W IP67 24/12-10 Orion DC-DC Converter

    Victron Energy 120W IP67 24/12-10 Orion DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241210060 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 20mA DC output voltage: 12V +/- 3% Maximum continuous output current: 10A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 1,5mm² (15 AWG) Cable cross section, output: 1,5mm² (15 AWG) Weight (kg): 300 g Dimensions (h x w x d in mm): 74 x 74 x 32 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $70.00

  • ORI241205060

    Victron Energy Victron Energy ORI241205060 60W 24/12-5 Orion IP67 DC-DC Converter

    Victron Energy 60W 24/12-5 Orion IP67 DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241205060 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 1mA DC output voltage: 12V +/- 3% Maximum continuous output current: 5A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 0,8mm² (18 AWG) Cable cross section, output: 0,8mm² (18 AWG) Weight (kg): 50 g Dimensions (h x w x d in mm): 25 x 43 x 20 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $43.00

  • MPLX4UP

    MotoBatt Motobatt MPLX4U-P 12V 2.2Ah 165CCA Motorcycle Battery with Balance System

    Motobatt 12V 2.2Ah 165CCA Motorcycle Battery with Balance System: A Motobatt Battery Is A Battery You Can Rely OnDesigned specifically for the Australian motorcycle market, Motobatt Batteries with AGM (Absorbent Glass Mat) technology boast a patented terminal design, with a shorter path for the current to follow from the plates to the terminal. This results in a much more solid cranking abilityMotobatt’s innovative internal design is manufactured to overcome the added load from things like hard wired headlights often seen in motorcycles.Claims are often made by different manufacturers regarding cranking capacity, where on fact, there is little advantage to be had from a battery that cranks harder than what is required to start the bike. Battery design on the other hand is always a payoff. The more cranking you have the less Amp Hour capacity you get, and vice versa. What feature is paramount, is the ability for that battery to withstand repeated attempts to start the bike and how quickly it can recover.Motobatt Batteries are an improvement on the more conventional design, boasting more lead and less filler which means more available power – Making them ideal for high load, high stress applications.Whether you’re starting a big V-Twin, Trail Bike or Road bike, a Motobatt AGM Battery won’t leave you stranded!Motobatt MPLX4U-P Features:Motobatt Lithium batteries are around 3 times lighter than lead acid batteries Designed to produce higher cranking performance for competition environments Strong Starting Current, Reliable repeated start opportunities over a wide variety of conditions Very Low “self-discharge” while in storage Fast Recharge time, 6 minutes for up to 90% charge.Cell Balancing Circuit (CBC). This is a feature that many competitor lithium batteries don’t have. It provides superior performance and extended battery life by balancing the battery cells while the battery is in use and preventing a single depleted cell causing thermal runaway.Recommended Charger: MBZCHPDCFBMotobatt Fat Boy ChargerRecommended Upgrade:MBLX4U-HP Featuring Protection Circuit Board (PCB) with automatic overcharging and over discharging protection.Motobatt Pro Lithium batteries require different care and maintenance from standard lead acid batteries. Always use a charger designed for use with lithium batteries. Warranty will be voided by use of any other type of charger.Motobatt Pro Lithium batteries are high performance starting batteries. They are not suitable for use where there is a parasitic drain on the battery, e.g. hot grips, alarms, clocks etc.Motobatt MPLX4U-P Specifications: Weight: 0.49 Kg Capacity: 2.2 Ah (165 CCA) Dimensions (LxWxH): 114 mm x 70 mm x 87 mm Replaces Motobatt Quadflex: MBTX4U Replaces Yuasa: YTX4L-BS, YT4L-BS, YB4L-A, YB4L-B, YTZ5S Legendary Products & Support From Authorized Dealers When you choose MotoBatt, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized MotoBatt dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by MotoBatt's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized MotoBatt dealer today!

    $122.84

  • MBHD12H

    MotoBatt Motobatt MBHD12H 12V 33Ah 390CCA AGM Motorcycle Battery With Quadflex Technology

    Motobatt 12V 33Ah 390CCA AGM Motorcycle Battery With Quadflex Technology: A Motobatt Battery Is a Battery You Can Rely On!Motorcycle Battery With Quadflex TechnologyMotobatt Quadflex batteries , the first and unique 4 terminal system, proposes the best balance between CCA and Amp hour capacity. Due to utilizing the wasted space inside a standard battery case, Motobatt maximizes the dimensions of the plates internally.Additionally the plate grids are made thicker, and that with the additional density of the pasting improves the Amp Hour capacity, durability and Cold cranking Amps. Motobatt has completely changed the Powersport market by improving an old design.Motobatt MBHD12H Features: 20% More Amp Hour Capacity* 20% More Cold Cranking Amps* Heavy Duty Pure Lead Calcium Cast Grids for High Strength More Surface Area per Plate for Superior Performance and Longevity Military Grade Absorbed Glass Matt Separators, Vibration Resistant Multi Terminal Design, Easy to Add Accessories Factory Activated, No Acid to Fill, Simply Check Charge & Go! Extremely Low Self Discharge Rate Motobatt MBHD12H Specifications: Voltage: 12V CCA: @-18C 390 Capacity (10HR): 33Ah Weight: 10.8kg / 23.81Ibs Dimensions (in / mm): L: 7.87(200) W: 5.12(130) H: 6.42(163) Assembly Figure Terminal Locations: 2 Terminals: 2, 14X2.5 (Threaded Flag) Screws: 2, M6X7 (Part#MPS2) Allen Wrench: 1, 4x4 (Part#MPAK2) Compatibility: Harley Davidson XLH (Sportster Electric Start) (67-78) - 1000CC Harley Davidson FL,FLH Series (Touring) (65-77) - 1200CC Harley Davidson FL,FLH Series (Touring) (78-84) - 1340(80)CC Ultranautics Wet Bike (85-86) - 800CC Legendary Products & Support From Authorized Dealers When you choose MotoBatt, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized MotoBatt dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by MotoBatt's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized MotoBatt dealer today!

    $244.81

  • MB55U

    MotoBatt Motobatt MB5.5U 12V AGM Battery

    Motobatt 12V AGM Battery: First & Unique 4 Terminal SystemMB5.5U Motobatt 12V AGM BatteryMotobatt Quadflex batteries propose the best balance between CCA and Amp hour capacity. By utilizing the wasted space inside a standard battery case, Motobatt maximizes the dimensions of the plates internally. Additionally, the plate grids are made thicker, and that with the additional density of the pasting improves the Amp Hour capacity, durability, and Cold-cranking Amps. Motobatt has completely changed the Powersport market by improving an old design.Motobatt MB5.5U Features: 20% More Amp Hour Capacity. 20% More Cold Cranking Amps. Heavy-Duty Pure Lead Calcium Cast Grids For High Strength. More Surface Area Per Plate For Superior Performance & Longevity. Military Grade Absorbed Glass Matt Separators, Vibration Resistant. Multi Terminal Design, Easy To Add Accessories. Factory Activated, No Acid To Fill, Simply Check Charge & Go! Extremely Low Self Discharge Rate. Motobatt MB5.5U Specifications: Voltage: 12v CCA: 90 Capacity: (10hr) 7ah Weight: 2.48kg / 5.47lbs Dimensions: (In / Mm) L: 5.31(135) W: 2.36(60) H: 5.12(130) Assembly Figure Terminal Locations: 2 Terminals: 2, M5x2.5 (Part #MPT1) Screws: 4,M5X7 (Part#2XMPS1) Allen Wrench: 1, 3x3 (Part#MPAK1) Terminal Caps: 4, 11x5.5 (Part#2XMPC1) Legendary Products & Support From Authorized Dealers When you choose MotoBatt, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized MotoBatt dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by MotoBatt's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized MotoBatt dealer today!

    $100.00

  • MB16A

    MotoBatt Motobatt MB16A 12V 17.5Ah 200CCA AGM Motorcycle Battery With Quadflex Technology

    Motobatt 12V 17.5Ah 200CCA AGM Motorcycle Battery With Quadflex Technology: MotoBatt Motorcycle Batteries Use the Latest Technology to Provide the Motorcycle Enthusiast with Hassle Free RidingMotorcycle Battery With Quadflex TechnologyMotobatt Quadflex batteries , the first and unique 4 terminal system, proposes the best balance between CCA and Amp hour capacity. Due to utilizing the wasted space inside a standard battery case, Motobatt maximizes the dimensions of the plates internally. Additionally the plate grids are made thicker, and that with the additional density of the pasting improves the Amp Hour capacity, durability and Cold cranking Amps. Motobatt has completely changed the Powersport market by improving an old design.Motobatt MB16A Features: 20% More Amp Hour Capacity* 20% More Cold Cranking Amps* Heavy Duty Pure Lead Calcium Cast Grids for High Strength More Surface Area per Plate for Superior Performance & Longevity Military Grade Absorbed Glass Matt Separators, Vibration Resistant Multi Terminal Design, Easy to Add Accessories Factory Activated, No Acid to Fill, Simply Check Charge & Go! Extremely Low Self Discharge Rate Motobatt MB16A Specifications: Voltage: 12 CCA: 200 Capacity (10HR): 19Ah Weight: 5.47kg / 12.1Ibs Dimensions (in / mm): L: 5.94(151) W: 3.58(91) H: 7.13(181) Assembly Figure Terminal Locations: 2 Terminals: 2, M6x2.5 (Part#MPT2) Screws: 2, M6X7 (Part#2xMPS2) Allen Wrench: 1, 4x4 (Part#MPAK2) Terminal Caps: 2, 12x5.5 (Part#MPC2) Vehicle Compatibility: Honda VT700C Shadow (84-85) - 700CC Honda VT750C Shadow (83) - 750CC Note: Accuracy of This Guide Is Not Guaranteed & Is Offered as A Guide Only Always Check the Dimensions & Polarity Before Purchasing Legendary Products & Support From Authorized Dealers When you choose MotoBatt, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized MotoBatt dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by MotoBatt's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized MotoBatt dealer today!

    $150.53

Footer image

© 2025 Frankies BrandBeast

    • Visa
    • Mastercard
    • American Express
    • Zip
    • PayPal

    Login

    Forgot your password?

    Don't have an account yet?
    Create account