Victron 120W 48/24-5A Orion-Tr Isolated DC-DC Converter: Designed to Be a True World-wide Product Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual). Adjustable output voltage: can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Input fuse (not replaceable) On 12V and 24V input models only Victron ORI482410110 Specifications: Input voltage range: 32-70V Under voltage shut down: 28V Under voltage restart: 30V Nominal output voltage: 24,2V Output voltage adjust range: 20-30V Output voltage tolerance: +/- 0,2V Output noise: 2mV rms Cont. output current at nominal output voltage and 25¬∞C: 5A Maximum output current (10 s) at nominal output voltage: 6,3A Short circuit output current: 25A Cont. output power at 25¬∞C: 120W Cont. output power at 40¬∞C: 100W Efficiency: 86% Off load current: < 60mA Galvanic isolation: 200V dc between input, output and case Operating temperature range: -20 to +55¬∞C (derate 3% per ¬∞C above 40¬∞C) Humidity: Max. 95% non-condensing DC connection: Screw terminals Maximum cable cross-section: 6 mm¬≤ AWG10 Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy Orion-Tr 24/12-30A 360W Isolated DC-DC Converter Heavy-duty 24V to 12V conversion serious output for serious 12V loads in any 24V system The Victron Energy Orion-Tr 24/12-30A (ORI241240110) is a high-current isolated DC-DC converter built for installations that demand real 12V power from a 24V source. Delivering 30A continuous output with burst capacity to 45A and rated at 360W at 40°C, it's designed for the kind of sustained, high-draw applications that lightweight converters simply can't handle: heavy 12V accessory loads in 24V trucks and buses, 12V hotel loads in commercial vehicles, or secondary 12V battery charging in large off-grid and marine systems. Part of Victron's globally trusted Orion-Tr isolated range, this unit brings full galvanic isolation between input, output, and case keeping your 12V circuits clean, quiet, and protected from whatever is happening on the 24V side. The adjustable output (10–15V) means it doubles as a precision 12V battery charger, letting you set the correct charge voltage for your secondary battery chemistry without a separate dedicated unit. Engineered to operate from −20°C to +55°C with thermal derating rather than hard shutdown, it's well suited to the demanding heat and corrugated-road conditions of Australian commercial, 4WD, and off-grid use. Key Specifications Input voltage range: 20–35V DC Under voltage shutdown: 14V Under voltage restart: 15V Nominal output voltage: 12.2V (adjustable 10–15V) Continuous output current: 30A at 25°C Maximum output current (10s burst): 45A Short circuit output current: 60A Continuous output power at 40°C: 360W Continuous output power at 25°C: 430W Efficiency: 88% Galvanic isolation: 200V DC between input, output, and case Output voltage tolerance: ±0.2V Output noise: 2mV rms Off-load current draw: less than 100mA Operating temperature: −20°C to +55°C (derate 3% per °C above 40°C) IP43 protection rating (terminals oriented downwards) DC connection: Screw terminals, max cable cross-section 16mm² Features & Benefits Remote on/off input: Route a simple low-power signal from a cabin switch, BMS, or engine run/stop output to control the converter without running heavy input wiring through a high-current switch. Cleaner installs, less voltage drop, and no oversized switch gear on the 24V input side. Adjustable output voltage (10–15V): Tune the output to the precise charge or supply voltage your 12V system needs. Set it to 14.4V for AGM absorption charging, 13.6V for float, or dial it to suit LiFePO4 making the Orion-Tr a flexible, all-chemistry 12V battery charger as well as a load supply. 30A continuous 45A burst: At 30A continuous and 45A for 10-second peaks, this is one of the highest-output single-unit isolated converters in the Orion-Tr range. It comfortably powers heavy 12V loads fridges, inverters, lighting, communications gear, winch control circuits without tripping into derating under normal conditions. Doubles as a 12V battery charger: In 24V trucks, buses, coaches, or commercial vehicles with a secondary 12V starter or accessory battery, the Orion-Tr replaces a standalone charger entirely. One unit handles both supply and charging duties, reducing system complexity and component count. 200V DC galvanic isolation: Complete electrical separation between the 24V input, 12V output, and chassis eliminates ground loops and conducted noise across the voltage boundary. Essential in vehicles and vessels where 12V and 24V circuits share physical proximity but must remain electrically independent. Unlimited parallel operation: Need more than 30A at 12V? Stack additional ORI241240110 units in parallel no current-sharing hardware required. Each unit adds its full 30A rated output to the bus, with no practical upper limit on the number of paralleled units. Short circuit proof output: Output faults won't destroy the unit. It recovers automatically once the short is cleared, minimising downtime in remote and commercial installations where replacement lead times matter. Thermal derating not hard cutoff: Above 40°C, output current reduces at 3% per degree rather than tripping offline. In a hot engine bay, a sun-baked trailer, or a sealed commercial vehicle body, that means the system keeps delivering usable power rather than going dark at the worst possible moment. IP43 rated enclosure: Dust and splash protection with terminals oriented downward. Suitable for under-bonnet, under-chassis, and enclosed cabinet installations in vehicles and marine applications where exposure to moisture and dust is part of daily operation. Screw terminals, 16mm² capacity: Heavy-gauge 16mm² cable support matches the wiring demands of a 30A+ installation. Standard screw terminals mean no crimping tools or proprietary connectors fast, solid connections that can be serviced in the field. Non-replaceable input fuse included: The 24V input model includes an internal non-replaceable input fuse for added circuit protection. Note: this fuse is not user-serviceable; if it fails, the unit requires replacement or warranty assessment. Technical Specs Specification Detail SKU ORI241240110 Brand Victron Energy Model Orion-Tr 24/12-30A Input Voltage Range 20–35V DC Under Voltage Shutdown 14V Under Voltage Restart 15V Nominal Output Voltage 12.2V Output Voltage Adjust Range 10–15V Output Voltage Tolerance ±0.2V Output Noise 2mV rms Continuous Output Current (25°C) 30A Maximum Output Current (10s) 45A Short Circuit Output Current 60A Continuous Output Power (25°C) 430W Continuous Output Power (40°C) 360W Efficiency 88% Off-Load Current Draw <100mA Galvanic Isolation 200V DC (input, output & case) Operating Temperature Range −20°C to +55°C Thermal Derating 3% per °C above 40°C Humidity Max 95% non-condensing DC Connection Screw terminals Maximum Cable Cross-Section 16mm² IP Rating IP43 (terminals down) Input Fuse Internal non-replaceable fuse included (24V input model) Compatible With 24V commercial vehicles (trucks, buses, coaches, plant equipment) with 12V accessory or starter battery loads 24V off-grid solar systems requiring a 12V secondary load or battery circuit 24V marine systems with 12V navigation, communications, or hotel loads 4WD and expedition vehicles with 24V primary systems and 12V accessory circuits Victron SmartSolar MPPT charge controllers operating on 24V systems Victron BMV battery monitors and Cerbo GX / Venus GX devices (system-level monitoring) Victron Lynx distribution busbars and fusing systems (for clean, fused 24V integration) Parallel arrays of additional ORI241240110 units (unlimited parallel operation supported) Frequently Asked Questions Can I use this to charge a 12V battery from my 24V truck or bus system? Yes. The adjustable output (10–15V) lets you set an appropriate charge voltage for your 12V battery chemistry AGM, gel, or LiFePO4 making the Orion-Tr a fully functional isolated 12V battery charger in any 24V vehicle. What is the maximum continuous output current this unit can deliver? The ORI241240110 delivers 30A continuous at 25°C and up to 45A for 10-second bursts. At 40°C ambient, continuous output power is rated at 360W sufficient for heavy 12V accessory loads in commercial and 4WD applications. Does galvanic isolation matter if both batteries share the same vehicle chassis? Yes. Even with a shared chassis ground, galvanic isolation prevents ground loops, eliminates conducted noise between the 24V and 12V circuits, and protects sensitive 12V electronics from transients and interference generated on the 24V side. How do I get more than 30A output at 12V from this unit? Connect additional ORI241240110 units in parallel. Victron supports unlimited parallel operation with no current-sharing hardware each unit adds 30A to the output, so two units deliver 60A, three deliver 90A, and so on. What happens if the internal input fuse opens? The internal input fuse on 24V input models is non-replaceable. If it opens due to a fault condition, the unit will need to be assessed under warranty or replaced. Always install appropriate external overcurrent protection on the input wiring to reduce the risk of nuisance fuse events. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy Orion-Tr Smart 24/12-30A 360W Isolated DC-DC Charger: Orion-Tr Smart 24/12-30A DC-DC Charger The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55¬∞C with a full rated output up to 40¬∞C. The Orion Smart DC-DC chargers can be used as a power supply or as a battery charger. In charger mode, the three-state charge algorithm will increase battery life by properly charging the battery. Especially in the case of vehicles with a smart alternator or voltage drop caused by long cable runs, controlled charging is indispensable. Controlled charging will also protect the alternator in lithium systems where direct charging can overload the alternator due to the low impedance of the lithium battery. In fixed output mode the output voltage will remain stable independent of the applied load or varying input voltage (within the specified range). The Orion Smart DC-DC charger can be set up to only provide power when the engine is running. This is possible thanks to the built-in engine shutdown detection. This also prevents the onboard voltage of the vehicle from becoming too low. It is not necessary to intervene in the system of the vehicle, to install a separate motor run sensor or to intervene in the CAN-bus system. Apart from this detection, the Orion Smart DC-DC charger can also be activated by a forced allowed-to-charge feature, e.g. connected to the ignition switch. The Orion-Tr Smart DC-DC Charger is fully programmable with the VictronConnect app. Bluetooth Smart Enabled: Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available. Fully Programmable: Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float For lead acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote On/Off: A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example). ‚ÄãAll models are short-circuit proof and can be paralleled to increase the output current. An unlimited number of units can be connected in parallel. High Temperature Protected: The output current will reduce at high ambient temperatures. IP43 Protection: When installed with the screw terminals oriented downward. Screw Terminals: No special tools are needed for installation. *Please note as per page 10 on the Victron manual, 60A circuit protection is required on both sides of the unit (start battery and auxiliary battery). The minimum cable size is 10mm2. Victron Energy ORI241236120 Features: 24V - 12V / 30Amps Smart DC-DC Charger Built-in Bluetooth IP43 Protection Easy Installation Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy Orion IP67 24/12-20A Fully Encapsulated. Pre-Cabled. Built for Where Others Won't Go. Product Overview The Victron Energy Orion IP67 24/12-20A (ORI241220260) is a compact, fully encapsulated DC-DC step-down converter rated at 20 amps and 240 watts continuous, converting a 24V DC source to a regulated 12V DC output. Unlike conventional converter units housed in open-frame or vented enclosures, the ORI241220260 is constructed from cast aluminium with electronics moulded in resin completely sealed against water, oil, dirt, shock, and ignition hazards with no external enclosure required. What makes this unit stand out in practical installations is the combination of its IP67 encapsulation, extra-long 1.8-metre input and output cables, and a wide 15–40V input range. The pre-fitted cables eliminate the need for intermediate connections in the majority of installs an important reliability advantage in demanding environments where every additional junction is a potential failure point. The wide input range handles voltage fluctuations from a partially discharged 24V bank through surge conditions from other loads on the same circuit, maintaining stable 12V output throughout. Built-in overheating protection means the unit can be installed in confined, high-temperature locations machine rooms, engine bays, and underbonnet spaces without thermal cutout concerns under normal operating conditions. Key Specifications Part Number: ORI241220260 Converter Type: Non-isolated DC-DC step-down Input Voltage Range: 15–40V DC Output Voltage: 12V DC Output Current: 20A Output Power: 240W continuous IP Rating: IP67 — dustproof and waterproof to 1 metre depth Enclosure: Cast aluminium, electronics moulded in resin Cable Length: 1.8 metres (input and output) Ignition Protected: Yes Overheating Protection: Yes Isolation: Non-isolated (input and output negatives shared) Features & Benefits Completely Encapsulated Construction — Cast aluminium housing with resin-moulded internal electronics. Water, oil, and dirt cannot penetrate the unit. Shockproof and ignition-protected as standard — no separate enclosure, no IP-rated cabinet, no additional cost or complexity. This is the converter you specify when the environment is genuinely hostile. IP67 Weatherproof Rating — Fully dustproof (IP6x) and protected against water immersion between 15cm and 1 metre depth (IPx7). Suitable for direct mounting in bilges, underbonnet compartments, underfloor chassis locations, marine bulkheads, and outdoor plant equipment — locations where a standard IP20 converter would fail or require a protective housing. Ignition Protected — Safe for installation in environments where flammable vapours may be present — petrol engine bays, fuel storage areas, and marine bilges with petrol engines. A critical compliance and safety specification often overlooked in converter selection. 1.8-Metre Pre-Fitted Input and Output Cables — Factory-fitted cables of 1.8 metres eliminate intermediate connections in most installations. Every additional junction in a high-current DC circuit is a potential source of resistance, heat, and failure — particularly in environments subject to vibration, moisture, and temperature cycling. Fewer junctions means better reliability, lower voltage drop, and less installation labour. Wide Input Voltage Range: 15–40V DC — Broader than the standard 18–35V range found on many 24V converters, the 15–40V window handles aggressive voltage sags during heavy engine starting or high load events, and accommodates higher absorption/equalisation voltages from some charger and alternator types without triggering an over-voltage shutdown. Stable Output Through Input Fluctuations — The wide input range ensures the 12V output remains stable and regulated when other high-draw equipment on the same 24V bus causes voltage sags or surges — important in shared electrical systems on trucks, vessels, and plant equipment. Overheating Protection — Built-in thermal protection allows the unit to operate safely in hot environments including machine rooms, enclosed engine bays, and confined equipment spaces. The converter manages its own thermal limits without requiring external thermal management or ventilation clearance. Compact 240W Output — At 20A / 240W, the ORI241220260 is the right-sized solution for dedicated 12V accessory circuits, auxiliary loads, communications equipment, lighting circuits, and small battery top-up applications running off a 24V primary source — without the overspecification and cost of a 70A or 100A unit. Non-Isolated Design — Input and output negatives are shared, which is the appropriate and efficient topology for the majority of automotive, marine, and off-grid 24V-to-12V conversion applications where galvanic isolation is not required. Technical Specs Specification Detail Part Number ORI241220260 Converter Type Non-isolated DC-DC step-down Input Voltage Range 15–40V DC Output Voltage 12V DC Output Current 20A Output Power 240W continuous IP Rating IP67 IP67 — Dust Protection Dustproof (IP6x — fully sealed) IP67 — Water Protection Immersion to 1 metre depth (IPx7) Enclosure Material Cast aluminium Internal Construction Electronics moulded in resin Cable Length 1.8 metres (input and output, pre-fitted) Ignition Protected Yes Overheating Protection Yes Isolation Non-isolated (input/output negatives shared) Compatible With / Goes Well With Applications: 24V trucks and heavy vehicles powering 12V accessories, communications, or lighting Marine vessels — 24V primary bank to 12V electronics, navigation, or cabin loads (bilge-mount capable) Off-road and expedition vehicles requiring underbonnet or underfloor converter mounting Agricultural and mining equipment with exposed or confined mounting locations Plant and industrial equipment in machine room or engine bay environments Camper trailers towed by 24V vehicles requiring a compact 12V supply Complementary Victron Products: Victron SmartShunt or BMV-712 (battery monitoring) Victron Cerbo GX (system integration and remote monitoring) Victron MPPT Solar Charge Controllers (system pairing) Victron MultiPlus or Quattro inverter-chargers (system integration) Frequently Asked Questions Why does this converter come with 1.8-metre pre-fitted cables instead of terminals or connectors? In IP67 applications — bilges, underbonnet spaces, outdoor plant — every cable junction is a potential ingress point and failure risk. Pre-fitted 1.8-metre cables eliminate the need for intermediate connections in most installs, improving reliability and reducing installation time in the environments where this unit is most commonly used. What does ignition protection mean and do I need it for my installation? Ignition protection means the converter is safe for use in areas where flammable fuel vapours may be present — petrol engine bays, fuel storage compartments, and bilges on petrol-engine vessels. If your installation is in or near a fuel vapour risk zone, ignition protection is a safety and compliance requirement, not just a feature. What is the input voltage range and why is 15–40V wider than most 24V converters? The ORI241220260 operates across 15–40V DC — broader than the 18–35V range on many 24V converters. This accommodates aggressive voltage sags during engine starting or heavy load events at the low end, and higher absorption or equalisation voltages from certain chargers and alternators at the top end, without the converter dropping out or triggering over-voltage protection. Can this converter be mounted directly in a bilge or wet outdoor location? Yes. The IP67 rating and fully encapsulated cast aluminium construction make it suitable for direct mounting in bilges, wet bays, underfloor chassis locations, and outdoor plant environments where water immersion to one metre depth is a realistic scenario. No additional waterproof enclosure is required. Is the ORI241220260 suitable for a marine installation on a vessel with a petrol engine? The IP67 rating and ignition-protected construction make it physically and safety-qualified for this application. However, this is a non-isolated converter — input and output negatives are shared. On petrol-engine vessels where galvanic isolation may be required to prevent stray current corrosion, the Victron Orion-Tr Smart Isolated range should be evaluated as an alternative. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy 12V to 24V 8A DC to DC Converters: The Orion Converters From Victron Energy Have Been Designed to Be a True World-wide Product An ever-increasing amount of electric equipment is being used on vehicles and boats. Because most low-voltage equipment, such as navigation and radio equipment, mobile telephones or car hi-fi systems, is designed for 12 Volts, Victron Energy supplies DC/DC converters which deliver a stable 12 Volt supply from a 24 Volt system. These products are also distinguished by high efficiency, together with absolute safety. An inferior supply can cause irreparable damage to your 12 Volt system, but the use of an Orion voltage converter prevents problems of that type. Next to converters from 24 V to 12 V, a wide range of other models is available. Victron Energy ORI122420020 Specifications: Input voltage range (V): 9-18 Under voltage shutdown (V): 8 Under voltage restart (V): 10 Output voltage adjustable with potentiometer: no Output voltage (V): Adjustable 20-30 V Efficiency (%): 93 Suitable to buffer-charge a battery: yes Can be connected in parallel: yes Continuous output current (A): 20 Max. Output current (A): 30 Fan assisted cooling (temp. controlled): yes Galvanic isolation: no Off load current: < 30mA Remote on-off: yes Operating temperature range (derate 3% per ¬∞C above 40¬∞C): -20 to +55¬∞C DC connection: M6 bolts Weight: 0.9kg Dimensions hxwxd in mm: 65x88x195 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy 12V to 24V 10A DC to DC Converters: The Orion Converters From Victron Energy Have Been Designed to Be a True World-wide Product An ever-increasing amount of electric equipment is being used on vehicles and boats. Because most low-voltage equipment, such as navigation and radio equipment, mobile telephones or car hi-fi systems, is designed for 12 Volts, Victron Energy supplies DC/DC converters which deliver a stable 12 Volt supply from a 24 Volt system. These products are also distinguished by high efficiency, together with absolute safety. An inferior supply can cause irreparable damage to your 12 Volt system, but the use of an Orion voltage converter prevents problems of that type. Next to converters from 24 V to 12 V, a wide range of other models is available. Victron Energy ORI122410020 Specifications: Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 20mA DC output voltage: 12V +/- 3% Maximum continuous output current: 10A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per ¬∞C above 40¬∞C): -20 to +70¬∞C (full rated output up to 40¬∞C) Overload protection: Hiccup mode, recovers automatically after the fault condition is removed Short circuit proof: Yes Protection against reverse polarity: Connection With external fuse or circuit breaker (not included) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

CTEK 12V 7A Marine Battery Charger and Maintainer: All-in-One Battery Charging for Marine Environments! The smart and flexible M100 is perfect for tough marine environments. The CTEK M100 8-step 12V battery charger and maintainer comes with a range of accessories for use with different types of battery. Its three selectable program modes make it suitable for use with 14-225Ah batteries and AGM batteries, and it can automatically detect whether your battery is near the end of its life. The M100 also has a Recond mode for reconditioning deeply discharged batteries and it can even be used as a 12V supply source, for example if you need to remove the battery without losing your settings. CTEK M100 Features: Compact tough design Fully automatic 8 step charging for maximum performance and extended life Splash proof and dust proof (IP65) Safe spark free operation Short circuit proof Reverse polarity protection No harmful galvanic currents CTEK M100 Specifications: Battery capacity 14–225 Ah Charging category AC charging Back current drain* Corresponding to less than 1 Ah/month Battery voltage 12 V Battery chemistry Lead acid Ambient operating temperature -20 °C to +50 °C Input 220–240 VAC, 50-60 Hz Output 14.4 V, 7.0 A Ripple** Less than 4 % Battery types 12 V:; WET; MF; AGM; GEL Degree of protection IP65 What's in the Box: CTEK M100 Marine Battery Charger and Maintainer Connect Eyelet M10 Connect Clamp Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Legendary product & support from authorised dealers Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today! Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Keepower's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today!

Read more less

Legendary product & support from authorised dealers Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today! Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Keepower's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today!

Read more less

Keepower is Intelligent Battery Care! The Keepower MEDIUM charger is the perfect choice for household and semi-professional users who need a fast and powerful but simple charger for charging cars, boats and caravans. The Keepower MEDIUM charger is equipped with a SUPPLY mode feature to avoid losing the car's setup information, when changing batteries. The Keepower MEDIUM charger is IP65 protected and can be used outdoor in the rain. Specifications: Nominal Battery Voltage 12V Charge Current 8A Battery Size 20Ah - 160Ah Max Total Output Power 150W Input Voltage 230Vrms ¬± 10% Mains Voltage TBD: 50Hz +- 3Hz Ripple Voltage (charging old battery with 40% capacity left) <100mVpp Current Ripple (charging old battery with 40% capacity left) 3% IP 65 Dimensions 200*118*70mm Charge Cable Size 2,50mm2*1800mm Cable length 2000mm Weight: 0.900kg Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Keepower's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today!

Read more less

Keepower is Intelligent Battery Care! The Keepower SMALL charger is the perfect all-round charger for the household. Suitable for motorcycles, lawn mowers, cars, boats, caravans and other smaller electrical 12V vehicles. The Keepower SMALL charger is IP65 protected and can be used outdoor in the rain. Specifications: Nominal battery voltage 12V Charge Current Ibatt 1A/4A Battery size 1.2Ah to 80Ah Max. total output power 75W Input voltage 230Vrms ¬± 10% (Mains voltage) 50 Hz ¬± 3Hz Ripple voltage (charging old battery with 40% capacity left) <100mVpp Current ripple (charging old battery with 40% capacity left) 3% IP 65 Size of charger 146*89*52mm Charger cable size 0,75mm2*1800mm Lenght main cable 2000mm Weight 0,490kg Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Keepower's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today!

Read more less

Keepower is Intelligent Battery Care! The Keepower LARGE charger is the perfect choice for the professional workshop or garage user who needs an extremely powerful but simple charger for charging cars, trucks and caravans. Equipped with a very powerful SUPPLY Mode that ensures a full battery even without the engine running. Capable of delivering 15A which makes it suitable for use in showrooms etc. and when servicing the car. The Keepower LARGE charger is IP44 protected. Specifications: Nominal battery voltage 12V Charge Current Ibatt 15A Battery size 40Ah to 300Ah Max. total output power 275W Input voltage 230Vrms ¬± 10% (Mains voltage) 50 Hz ¬± 3Hz Ripple voltage (charging old battery with 40% capacity left) <100mVpp Current ripple (chargeing old battery with 40% capacity left) 4% IP 44 Size of charger 200*118*70mm Charger cable size 2,50mm2 x1800mm Lenght main cable 2000mm Weight 0,900kg Legendary Products & Support From Authorized Dealers When you choose Keepower, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Keepower dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Keepower's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Keepower dealer today!

Read more less