Victron Energy Skylla 24/30(1+1) 120-240V Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide ProductSkylla-IP44 (1+1): two outputs to charge 2 battery banksThe Skylla-IP44 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Skylla-IP44 (3): three full current outputs to charge 3 battery banksThe Skylla-IP44 (3) features 3 isolated outputs. All outputs can supply the full rated output current.IP44 protectionSteel epoxy powder coated case and splash proof. Withstands the rigors of an adverse environment: heat, humidity and salt air.Circuit boards are protected with an acrylic coating for maximum corrosion resistance.Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.LCD displayFor status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.CAN bus interface (NMEA2000)To connect to a CAN bus network, to a Skylla-i Control panel or to the Color Control digital display.Synchronised parallel operationSeveral chargers can be connected in parallel and synchronised with help of the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables.The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP44 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.Less maintenance and aging when the battery is not in use: the Storage modeThe Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.To increase battery life: temperature compensationEvery Skylla-IP44 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-IP44 is provided with a voltage sense facility so that the battery always receives the correct charge voltage.Use as a power supplyAs a result of the excellent control circuit, the Skylla-IP44 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger.Victron Energy SKY024030000 Specifications:Skylla-IP44 Input voltage (VAC): 120/230 V Input voltage range (VAC): 90-265 V Maximum AC input current @ 100 VAC: 10 A Frequency: 45-65 Hz Power factor: 0,98 Charge voltage 'absorption': 28,8 V Charge voltage 'float': 27,6 V Charge voltage ‘storage’: 26,4 V Charge current: 30 A Charge current starter batt. (A): 3 A Charge algorithm: 7 stage adaptive Battery capacity: 150-300 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, not isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes (internal air circulation) Protection: Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range: -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing): max 95% Enclosure: Material & Colour: steel (blue RAL 5012) Battery-connection: M6 bolts 230 VAC-connection: screw-clamp 6mm² (AWG 10) Protection category IP44 Weight: 6kg (14 lbs) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy Skylla 12/60(3) 120-240V Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide ProductSkylla-IP44 (1+1): two outputs to charge 2 battery banksThe Skylla-IP44 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Skylla-IP44 (3): three full current outputs to charge 3 battery banksThe Skylla-IP44 (3) features 3 isolated outputs. All outputs can supply the full rated output current.IP44 protectionSteel epoxy powder coated case and splash proof. Withstands the rigors of an adverse environment: heat, humidity and salt air.Circuit boards are protected with an acrylic coating for maximum corrosion resistance.Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.LCD displayFor status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.CAN bus interface (NMEA2000)To connect to a CAN bus network, to a Skylla-i Control panel or to the Color Control digital display.Synchronised parallel operationSeveral chargers can be connected in parallel and synchronised with help of the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables.The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP44 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.Less maintenance and aging when the battery is not in use: the Storage modeThe Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.To increase battery life: temperature compensationEvery Skylla-IP44 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-IP44 is provided with a voltage sense facility so that the battery always receives the correct charge voltage.Use as a power supplyAs a result of the excellent control circuit, the Skylla-IP44 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger.Victron Energy SKY012060100 Specifications:Skylla-IP44 Input voltage (VAC): 120/230 V Input voltage range (VAC): 90-265 V Maximum AC input current @ 100 VAC: 10 A Frequency: 45-65 Hz Power factor: 0,98 Charge voltage 'absorption': 14,4 V Charge voltage 'float': 13,8 V Charge voltage ‘storage’: 13,2 V Charge current: 3 x 60A Charge current starter batt. (A): n.a Charge algorithm: 7 stage adaptive Battery capacity: 300-600 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, not isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes (internal air circulation) Protection: Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range: -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing): max 95% Enclosure: Material & Colour: steel (blue RAL 5012) Battery-connection: M6 bolts 230 VAC-connection: screw-clamp 6mm² (AWG 10) Protection category IP44 Weight: 6kg (14 lbs) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy 120W IP67 24/12-10 Orion DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241210060 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 20mA DC output voltage: 12V +/- 3% Maximum continuous output current: 10A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 1,5mm² (15 AWG) Cable cross section, output: 1,5mm² (15 AWG) Weight (kg): 300 g Dimensions (h x w x d in mm): 74 x 74 x 32 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Victron Energy 60W 24/12-5 Orion IP67 DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241205060 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 1mA DC output voltage: 12V +/- 3% Maximum continuous output current: 5A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 0,8mm² (18 AWG) Cable cross section, output: 0,8mm² (18 AWG) Weight (kg): 50 g Dimensions (h x w x d in mm): 25 x 43 x 20 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

Read more less

Marine Charger for Smaller Batteries - Perfect Choice for Jet Skis and Small Boats! CTEK M45 is the perfect choice for the marine market and boats with batteries from 1.2-120Ah, like jet skis and smaller boats. Unlike old battery chargers, CTEK chargers are designed with a focus on simplicity, safety and flexibility. Marine batteries need special care as they are put under a lot of pressure. The batteries need to recover quickly to satisfy the needs and comfort of the boat owner. Fully automatic CTEK M45 offers a fully automatic charging cycle, the charger takes its own readings and then begins to charge the battery, including pulse maintenance (arguably the most caring mode for a battery connected for a long time – patented system by CTEK) for best performance and service life. CTEK M45 can be connected for months, which is ideal when the boat is not in use and during the off season. Flexible for different battery needs CTEK M45 is specifically developed for different needs, boats and batteries. There is a choice between three different modes. The low-current mode (the jet ski icon) is perfect for smaller 12V batteries such as jet skies. The higher current mode (the boat icon) is for marine applications with batteries up to 120Ah. Finally, an additional AGM mode is specifically aimed at charging and maintenance of the Optima Red Top batteries and is also perfect for cold weather. No harmful galvanic currents The CTEK M45 produces no harmful galvanic currents that cause corrosion which quickly damages various metal components under the boat, including propellers and ladders. Counteracts sulphation Unused batteries lose their power and their life is shortened through sulfation. It is also more difficult to charge sulfated batteries. The CTEK M45 has a patented method for reconditioning sulfated batteries. The charger analyzes the state of the battery and, if possible, recovers the battery and its power. Compatible with the boats electronic equipment The marine environment is filled with GPS, navigation systems and other devices that are sensitive. Unlike less-sophisticated chargers, there is no need to disconnect the battery when charging as CTEK M45 is specially designed not to damage the electronic systems. Made for all weather conditions and situations The CTEK M45 is prepared to charge and maintain, no matter the weather, temperature or situation. The CTEK M45 is extremely robust and water and dust resistant (IP65 classification). The CTEK M45 is certified for use between –20ºC and +50ºC. In order to make things easier and more convenient, Comfort Connect (eyelet terminals) can be permanently connected to the boat battery. Designed for safety All CTEK models are designed to consider the safety of the user. They are spark free, making the connection much easier and safer considering the gases batteries normally produce. The CTEK M45 is also protected from reverse-polarity connections and is short-circuit proof. A red light on the charger will simply indicate that the charging cannot begin until the user has connected the charger correctly. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Extend Your Power Reach: NOCO 12-Volt Adapter Plug Socket Extension Cable for Enhanced ConnectivityThe NOCO 12-volt adapter plug socket extension cable extends the reach of your favorite 12-volt devices by an additional 12-feet. Features inline fused connection to prevent dangerous short circuits, water resistant cap to protect the 12-volt female socket from the elements, and a LED indicator to show when your 12-volt socket is active. Made from a high-conductivity 100-percent copper wire and a rated capacity of 15-amperes. Molded strain reliefs provide additional support against unwanted tension on the cable connections. Perfect for your favorite 12-volt devices, like a tire inflator, cooler, vacuum, heated blanket, fan, power inverters, coffee maker and more.Use as a 12-foot extension for any 12-Volt device, including your favorite NOCO accessories.Quickly extend the reach of any 12-volt power outlet with a 12-foot extension cable; perfect for large cars or extending the reach of 12-Volt power accessories like tire pumps, power inverters, and more. Adding multiple extensions is possible, but could effect charging times and power output.Tire pumps, vacuums and more: power your favorite 12-volt devices directly from a 12-volt outlet, like a tire inflator, vacuum , coffee maker, and more. Quickly Connect; Instantly tap into a 12-volt outlets power and create an easy-to-use 12-volt extension.The GC019 provides 12-feet of additional reach for all of your 12-Volt accessories.The GC019 is now equipped with a new and improved built-in fuse for increased safety that offers increased protection at 20Amps.Engineered to withstand all the elements from dirt, water, gasoline, and more. A water resistant cap protects the 12-Volt female socket from the elements.Features: Extend the reach of your favorite 12-volt devices, like a tire inflator, vacuum and more. Water resistant cap to protect the female plug socket from the elements. Built-in 20-Amp fused connection for protection against short circuit. High-conductivity 16 AWG copper wire and rated capacity of 15-amperes. Molded strain reliefs prevent unwanted strain on the wire connections. WARNING: California’s Proposition 65 Specifications: Input 12 Volt Male Plug Adapter Output 12 Volt Female Plug Adapter Fuse 20 Amp Micro Blade ATC Wire Size 16 AWG Cable Length 12 Feet Compatible With: GC003 GC017 GC018 GC019 GC020 Legendary Products & Support From Authorized Dealers When you choose NOCO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NOCO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NOCO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NOCO dealer today!

Read more less

Power Your Adventures Anywhere: 12V Plug with Eyelet Terminals for Seamless Battery ConnectionThe 12V Plug with Eyelet Terminals permanently connects directly to your battery with integrated eyelet terminals (3/8-inch). Easily power your favorite 12-volt devices directly from your battery, like a tire inflator, vacuum, coffee maker, fan, cooler and more. It features fused connections for increased safety, and a water-resistant cap to protect the 12-volt female socket from the elements. Made from a high-conductivity 16AWG 100-percent copper wire and a rated capacity of 15-amperes.Power 12V accessories directly from battery terminals. Permanently attach eyelets to a battery for quick connections and easy access to 12V power.Power 12V accessories directly from battery terminals. Permanently attach eyelets to a battery for quick connections and easy access to 12V power.The GC018's lie-flat eyelet design creates a better battery connection for higher conductivity. The low-set eyelet also reduces the risk of bending or damaging the eyelet or terminal post. New copper-plated eyelets improve conductivity, maximizing performance from the battery charger.Leave GC018 hard-mounted to battery terminals and easily move genius chargers between batteries.The GC018 is now equipped with a new and improved built-in fuse for increased safety that offers increased protection at 20Amps.Features: Power your favorite 12-volt devices, like a tire inflator, vacuum, coffee maker and more. Lie-flat design for seamless installations with M10 (3/8-inch) hole size. Water resistant cap to protect the female socket from the elements. Built-in fused connection for protection against short circuit. High-conductivity 16 AWG copper wire and rated capacity of 15-amperes. Molded strain reliefs prevent unwanted strain on the wire connections. WARNING: California’s Proposition 65 Specifications: Input M10 (3/8-Inch) Eyelet Terminals Output 12 Volt Plug Female Adapter Fuse 20 Amp Micro Blade ATC Wire Size 16 AWG Cable Length 24 Inches Over Length 28 Inches Compatible With: GC003 GC019 GC020 What's in the Box: POS / NEG M10 10mm Eyelets to 12V Plug Adaptor Legendary Products & Support From Authorized Dealers When you choose NOCO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NOCO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NOCO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NOCO dealer today!

Read more less

Make the Most of Your Charger!Designed tough to survive harsh conditions and deliver reliable power, just like the chargers they will accompany, Noco's range of X-Connect accessories further expand charging possibilities of Noco battery chargers.Noco GC013 X-Connect Male-To-Male Coupler allows two accessories to connect to each other. Easily connect X-Connect Battery Clamps or Eyelet Terminals to a 12V Plug Female Outlet to create a 12-volt outlet directly from the battery, or use it to create used endless options and pair it to a variety of 12-volt accessories.Rugged, Water-Resistant Plug-n-Play Connections Deliver Maximum PerformanceX-Connect creates a solid weatherproof connection that provides maximum current flow and makes interconnecting different applications fast and easy. The possibilities are endless.Versatility - It Doesn't Stop ThereThe male-to-male coupler is unique for the NOCO accessory line as it allows you to mix and match different accessories in order to accomplish any charging task you may need. Basically, the GC013 can be used for a multitude of charging applications. For example, the illustration below explains how to create a 12V port anywhere you have a battery. Features: Allows multiple accessories to connect and work together Use your imagination and create endless accessory options Built-in fuse protection for increased safety More ways to charge with plug-n-play accessory changes Rugged, watertight connector for extreme environments Specifications: Input: X-Connect Female Output: X-Connect Male Fuse: NA Wire Size: 16AWG Cable Length: 1 Inch Compatible With: Any X-Connect Accessory with a Female X-Connect End Legendary Products & Support From Authorized Dealers When you choose NOCO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NOCO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NOCO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NOCO dealer today!

Read more less

Made for Genius Chargers! X-Connect XL Eyelet Terminal allows a battery charger to connect quickly to any battery. Replace a lost connector or permanently mount one on your car, boat, truck, or any other vehicle for easy charging. M10 Eyelet Connectors. Made For Genius Chargers.Compatible with X-Connect accessories, permanently mount a battery connection to any battery to easily charge hard-to-access batteries. Lie-Flat Design. Improved Eyelet Design.The GC008's lie-flat eyelet design creates a better battery connection for higher conductivity. The low-set eyelet also reduces the risk of bending or damaging the eyelet or terminal post. New copper-plated eyelets improve conductivity, maximizing performance from the battery charger. Hard Mount. Built-In M10 Eyelets.Leave GC008 hard-mounted to battery terminals and easily move genius chargers between batteries. Protected.The GC008 is now equipped with a new and improved built-in fuse for increased safety that offers increased protection at 20Amps. Plug 'N Play. Compatible with Genius Chargers.This eyelet terminal is compatible with a wide variety of NOCO Genius chargers to accommodate your charging needs. More Ways to Charge. Built-In Quick-Release.With a quick-release built in, NOCO X-Connect makes it easier than ever to swap between accessories. NOCO X-Connect is compatible with NOCO Genius Smart Battery Chargers, both G Series and GENIUS Series models. Rugged. Watertight Connector.Water-resistant X-Connect connector designed for maximum performance, engineered to withstand all the elements from dirt, water, gasoline, oil and more. Features: Permanently mount a battery connection to any battery. Lie-flat design for seamless installations with M10 (3/8-inch) hole size. Built-in fuse protection for increased safety. More ways to charge with plug-n-play accessory changes. Rugged, watertight connector for extreme environments. WARNING: California’s Proposition 65 Specifications: Input X-Connect Female Output M10 (3/8-Inch) Eyelet Terminals Fuse 20 Amp Micro Blade ATC Wire Size 16AWG Overall Length 22.5 Inches Cable Length 21 Inches Compatible With: GENIUS1 GENIUS2 GENIUS2X2 GENIUS2X4 GENIUS5 GENIUS10 G4 (All Versions) G750 (All Versions) G1100 (All Versions) G3500 (All Versions) G7200 (All Versions) Not compatible with NOCO Boost UltraSafe Lithium Jump Starters What's in the Box: POS / NEG M10 10mm Eyelets to X-Connect Cable Legendary Products & Support From Authorized Dealers When you choose NOCO, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NOCO dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NOCO's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NOCO dealer today!

Read more less

CTEK 24V DC-DC Battery Charger, Separator, 12V Converter and Equaliser: The CTEK D250TS Continues the Tradition of Offering Chargers with A Focus on Simplicity, Safety and VersatilityThe CTEK D250TS is a fully automatic battery charger, battery separator, 12V converter and an equaliser for 24V battery banks combined. Perfect for heavy vehicles, RV's, boats and other vehicles.The D250TS is a fully automatic 4-step charger that supplies 10A to 24V batteries of 20–200Ah. The charger is IP65 classified (water jet and dust protected and approved for outdoor use) and protects vehicle electronics. It is suitable for all types of lead-acid batteries (Wet, MF, Ca/Ca, Gel, AGM). It is supplied with a 2 year warranty.CTEK D250TS Features: Multi-step charging from 24V sources like alternators. Battery separator that eliminates diodes and VSR relays. Maintenance charge of starter battery. Simplified installation of remote batteries for bow thrust of anchor winch. Built-in 12V converter. CTEK D250TS Specifications: Volt: 24V Input voltage: 14-30V Charging voltage: 28.8 V at 25°C, temperature compensated. Voltage reduced at higher voltage, increased at lower Charging current: 10A max Back current drain: <1mAh/month Equalization current: Max 10 A, average pending time used for Starter battery charging Equalization voltage: 50 % of input voltage Ripple: <4% Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 4 step, fully automatic DC/DC charger Battery types: All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Status signal: +24 V ON when D250TS is working properly. Max current 500 mA Battery capacity: 28–200 mAh Dimensions: 197 x 93 x 49mm (L x W x H) Insulation: class IP65 Connection Diagram Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK Rubber Bumper: Protect Your Charger And Your Paint WorkMade of durable silicon rubber material, the CTEK Rubber Bumper helps protect your CTEK charger from bumps and scratches. The CTEK BUMPER fits snugly around the body of your CTEK charger to give extra grip on slippery surfaces.Suitable for all CTEK chargers 3.6-5.0mAh. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Suitable for Use with All CTEK Chargers Up to 10A Using the Comfort Connect System Extension cable allows the CTEK charger to be used further away from the vehicle or battery. To use, simply connect the Comfort Connect Extension cable into your CTEK charger accessory plug and place the other end into the socket of the clamp or eyelet accessories that came supplied with your CTEK charger. The unique CTEK Comfort Connect system ensures a secure connection. Features: 2.5M/8' 2” Cable Max 10A Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less