Polk Audio PA D Series 5-Channel Class D Amplifier: Polk Audio PA Series Amplifiers - Power & Style Without Compromise The Polk PA Series amplifiers were conceived, designed & engineered to deliver premium audio with unparalleled detail & reliability. Polk Audio PA D5000.5 Features: 5-channel car amplifier 70 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 100 watts RMS x 4 + 400 watts RMS x 1 at 2 ohms 200 watts RMS x 2 in bridged mode at 4 ohms + 500 watts RMS x 1 at 1 ohm Variable gain, high-pass filter (40-400 Hz 12 dB/octave), and low-pass filter (80-4000 Hz, 12 dB per octave) for front channels Variable gain and high-pass filter (40-4000 Hz 12 dB/octave) for rear channels Variable gain, low-pass filter (40-220 Hz, 12 dB/octave) and subsonic filter (20-38 Hz) for subwoofer channel Wired remote subwoofer level control Preamp inputs Fuse rating: 40A x 2 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier 14-1/8"W x 1-13/16"H x 6-3/4"D Small Amp That'll Power Your Whole System Polk's PA D5000.5 5-channel amplifier may be small, but it can power your complete system, sending 70 watts RMS to each of your front and rear speakers and up to 500 watts RMS to a sub. Or, you can switch this little beast to 3-channel mode to drive a couple high-level components with 200 watts RMS each and still have that 500 watts RMS left over for the bass. Best of all, this powerhouse will fit in almost any location in your vehicle because of its convenient size and shape. Handsome with A Clear Voice Polk's Class D amp technology helps this amp reproduce music very cleanly, with no added coloration or distortion. Adjustable high- and low-pass filters help you to tune your system, keeping bass away from full-range speakers and high notes away from subs.You'll find that the subsonic filter's a big help for tuning your sub in a ported enclosure. Polk includes a wired remote, so you can control the subwoofer level from your front seat. This amp's tough, good-looking stainless steel case won't tarnish, even in very humid conditions. What's In The Box: Five channel amplifier Remote bass level control 17' Remote bass level control cable Four 40 amp ATO fuses (2 installed/ 2 extra) Four 1" Self-tapping screws Owner's manual (English/ French/ Spanish/ German/ Italian/ Portuguese) On-line product registration information
Legendary Products & Support From Authorized Dealers
When you choose Polk Audio, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Polk Audio dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Polk Audio's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Polk Audio dealer today!
Super Small MonoblockThe new SS amplifiers are the latest in high speed, high current class D designs offering high power and superior sound quality in compact footprints. The classic DD AUDIO style heat sink is used in this upgrade for max cooling with 50% more side wall thickness than industry norms and extra long fins to increase surface area. All major components have been upgraded; higher current mosfets and output devices, increased power capacitors, a more powerful transformer, plus improved venting and PCB with twice the thermal capability.These new high-end mini amps are state of the art, no compromise designs yielding the best sound with unparalleled power to size ratio. The transformation is not only tangible, but audibly apparent.Big clean power from a small package is what the SS600 does best, 600 Watts of continuous power at less than 1% THD+N. Within its chassis you'll discover a selection of the best branded electrical components, 4 layer PCB and large toroidal transformer. Together, these elements synergize to enrich your system with precision and power. For the SS Series the main design focus was to pack as much full-range stereo output capability as possible into as compact of a chassis as possible. We utilized discrete circuit class D technology for ultra low distortion levels that rival class AB designs. The resulting amp is capable of driving multiple driver mid-range and tweeter arrays while consuming less current, taking up less space and delivering more power. Features: High Level Inputs 12dB/Oct High Pass/Low Pass X-Overs Heavyweight DD Aluminum Chassis Set Screw Power and Speaker Terminals Remote Gain Control 4 AWG Power Terminals Specifications: Operating Voltage: 9 - 16 Test Voltage: 14.4 Input Channel(s): 1 Output Channel(s): 1 Continuous Wattage @4ohm: 250 Continuous Wattage @2ohm: 350 Continuous Wattage @1ohm: 600 Max Current Draw (Amps): 60 RCA Input Voltage Sensitivity: 6 - 0.25 High-Level Input Voltage Sensitivity: 20 - 1.1 RCA Input S/N: > 95 Damping Factor: > 100 THD: < 0.1% Bass Boost: 12 Frequency Response (Hz): 20 - 20k Sub-Sonic Filter: 30 - 100 Low-Pass Filter: 35 - 250 Remote Control: Remote Included in Box Power Wire Gauge: 4 Speaker Wire Gauge: 12 Dimensions (Inches): 5.75 x 4.5 x 2 Dimensions (MM): 146 x 115 x 50 Shipping Weight (Lbs): 4
Legendary Products & Support From Authorized Dealers
When you choose DD Audio, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized DD Audio dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by DD Audio's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized DD Audio dealer today!
Super Small Multi-Channel
The new SS amplifiers are the latest in high speed, high current class D designs offering high power and superior sound quality in compact footprints. The classic DD AUDIO style heat sink is used in this upgrade for max cooling with 50% more side wall thickness than industry norms and extra long fins to increase surface area. All major components have been upgraded; higher current mosfets and output devices, increased power capacitors, a more powerful transformer, plus improved venting and PCB with twice the thermal capability.These new high-end mini amps are state of the art, no compromise designs yielding the best sound with unparalleled power to size ratio. The transformation is not only tangible, but audibly apparent.The SS4.500 is a 4 channel amplifier delivering a minimum of 125 Watts per channel from a mere 30 square inch footprint. This versatile, high speed, class D design can drive full range components and subwoofers through selectable high pass and low pass crossovers. These super small amplifiers are the ultimate combination of precision sound quality and installation ease.
For the SS Series the main design focus was to pack as much full-range stereo output capability as possible into as compact of a chassis as possible. We utilized discrete circuit class D technology for ultra low distortion levels that rival class AB designs. The resulting amp is capable of driving multiple driver mid-range and tweeter arrays while consuming less current, taking up less space and delivering more power.
Features:
High Level Inputs
12dB/Oct High Pass/Low Pass X-Overs
Heavyweight DD Aluminum Chassis
Set Screw Power and Speaker Terminals
4 AWG Power Terminals
Specifications:
Operating Voltage: 9 - 16
Test Voltage: 14.4
Input Channel(s): 4
Output Channel(s): 4
Continuous Wattage @4ohm: 75 x 4
Continuous Wattage @2ohm: 125 x 4
Max Current Draw (Amps): 40
RCA Input Voltage Sensitivity: 6 - 0.25
High-Level Input Voltage Sensitivity: 20 - 1.1
RCA Input S/N: > 95
Damping Factor: > 100
THD: < 0.1%
Frequency Response (Hz): 20 - 20k
High Pass Filter: 35 - 250
Low-Pass Filter: 35 - 250
ZVL Input: No
Pass Thru Output: No
Power Wire Gauge: 4
Speaker Wire Gauge: 12
Dimensions (Inches): 5.75 x 4.5 x 2
Dimensions (MM): 146 x 115 x 50
Shipping Weight (Lbs): 4
Legendary Products & Support From Authorized Dealers
When you choose DD Audio, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized DD Audio dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by DD Audio's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized DD Audio dealer today!
Boost Your Amplifier's Performance: The Essential Role of Stiffening Capacitors in Voltage StabilizationStiffening capacitors strengthen/ stabilize the voltage that feeds your amplifiers. in many instances this can greatly improve the power and sound quality performance of your amplifiers. the bigger the amps the more likely you need a stiffening cap.Features: Gold plated Best conductivity 2 Hole straight Packed in bag with header card
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
These Adaptors Allow You to Install an Aftermarket Amplifier to Your Factory Head Unit This device restores the dynamic range of the bass signal from the factory system which is often heavily compressed.
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
600W Max, 2-Channel Amplifier
Orion Cobalt 2-channel class A/B car amplifier.
Specifications:
RMS Power Rating: 4 ohms: 100 watts x 2 chan. / 2 ohms: 155 watts x 2 chan. / Bridged, 4 ohms: 310 watts x 1 chan.
Max power output: 600 watts
MOSFET power supply
Tri-mode and bridgeable operation
LED power and protect indicators
Illuminated blue LED stripe design
Selectable bass boost (0, 6, 12 dB)
2/1 channel operation
High-level inputs (signal sensing for automatic turn on)
3-Way system protection circuitry (thermal, short circuit, and overload)
Heavy duty aluminum alloy convection heatsink
Chrome-plated RCA level input
Chrome-plated screw terminals
Input sensitivity (175mV-8V)
Damping factor (>100)
Continuously variable high-pass filter (50-500 Hz)
Continuously variable low-pass filter (50-500 Hz, 2nd order 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-30,000 Hz
Dimensions: 11-7/16"L x 8-1/8"W x 2-1/8"H
4-gauge power and ground wiring is required for installation
Legendary Products & Support From Authorized Dealers
When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Orion dealer today!
Stinger SPX350X2 2-Channel 350W Class D Powersports Amplifier with IPX-4/5 Weather Resistance
Built for the elements a compact, weather-resistant Class D powersports amplifier delivering 350W bridged into boats, ATVs, UTVs, motorcycles, and 4x4s where standard car amplifiers won't survive.
Product Overview
The Stinger SPX350X2 is a 2-channel Class D powersports amplifier engineered for use in harsh environments where conventional car amplifiers fall short. With an IPX-4/5 weather-resistant design, weather-resistant PCB, and D-Class MOSFETs, it is built to handle the moisture, dust, vibration, and wide voltage swings encountered in marine, off-road, ATV, UTV, motorcycle, and 4x4 applications.
The unregulated power supply design operates across a wide voltage range (8–16V), making it suitable for applications with non-standard battery systems. An AUX RCA pass-through output allows multiple SPX350X2 units to be daisy-chained from a single audio source, and an included remote volume control knob with mute function provides easy level adjustment.
Features & Benefits
IPX-4/5 weather-resistant design — moisture, splash, and dust resistant
Weather-resistant PCB for long-term durability in harsh environments
Full range Class D amplifier with D-Class MOSFETs
Unregulated power supply — operates across 8V to 16V
AUX RCA pass-through output for linking multiple amplifiers from one source
Included remote volume control knob with mute function
12dB/octave Linkwitz-Riley crossover, adjustable 40Hz–400Hz
Balanced 2-channel RCA input (200mV–12Vrms)
Diecast endcaps with removable mounting feet
Compact, low-profile footprint
Suitable for motorcycles, ATVs, UTVs, boats, marine, and mobile applications
Technical Specs
Specification
Detail
SKU / Part Number
SPX350X2
Brand
Stinger
Channels
2-Channel
Class
Class D (Full Range)
RMS Power @ 4Ω (Stereo)
125W RMS x 2
RMS Power @ 2Ω (Stereo)
175W RMS x 2
RMS Power @ 4Ω (Bridged)
350W RMS
Rated Voltage
14.4V
Operating Voltage Range
8V – 16V (Unregulated)
Preamp Input
2-Channel Balanced RCA
Input Voltage Range
200mV – 12Vrms (Balanced)
Preamp Output
2-Channel AUX RCA Pass-Through
Frequency Response
20Hz – 20kHz
Signal to Noise Ratio
>110dB (CEA Standard)
THD+N
<1%
Crossover
12dB/Octave Linkwitz-Riley, 40Hz–400Hz
Power / Ground Wire Gauge
8 AWG
Weather Rating
IPX-4/5
Endcaps
Diecast with removable mounting feet
What's in the Box
Amplifier, Volume Control Knob, Amplifier Fly Lead Harness, Manual
Compatible With / Goes Well With
Direct Vehicle Fit:
Universal — motorcycles, ATVs, UTVs, boats, marine vessels, 4x4 and off-road vehicles
Goes Well With:
Marine-grade speakers and powersports speakers
Additional SPX350X2 units (daisy-chainable via AUX RCA output)
Marine head units with RCA pre-outs
8 AWG power and ground wiring kits
Stinger powersports wiring accessories
Frequently Asked Questions
What does IPX-4/5 weather resistance mean for this amplifier?
IPX-4 provides protection against water splashing from any direction. IPX-5 adds protection against water jets. For a powersports amplifier, this means it can handle rain, spray, splashing water, and wet environments — though it is not fully waterproof and should not be submerged.
Can I run this amplifier in bridged mono mode?
Yes. The SPX350X2 delivers 350W RMS bridged into 4Ω, making it suitable for driving a single subwoofer or full-range speaker in high-output mono applications.
Can I link multiple SPX350X2 amplifiers from one audio source?
Yes. The AUX RCA pass-through output allows you to connect a second (or further) SPX350X2 amplifier directly from the output of the first, distributing a single audio source to multiple amplifiers without additional signal splitting equipment.
Why does this amplifier use an unregulated power supply?
Unregulated power supplies are better suited to applications with non-standard or fluctuating voltage — common in boats, ATVs, and motorcycles where charging systems and battery capacities vary. The SPX350X2 is designed to operate reliably across 8V to 16V.
What wire gauge do I need to install this amplifier?
Stinger specifies 8 AWG power and ground wiring for the SPX350X2. Using undersized wiring will limit power delivery and may cause overheating — always match or exceed the recommended gauge.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Rockford Fosgate M2-200X2 M2 Series 200 Watt 2-Channel Full-Range Class-D Element Ready Marine Amplifier
A marine grade 200W 2-channel full-range Class-D amplifier delivering 100W x 2 at 2-ohm or 200W x 1 at 4-ohm bridged (CTA-2006 rated). Features C.L.E.A.N. gain calibration, P.O.W.E.R. supply, fully adjustable high-pass and low-pass crossovers, variable infrasonic filter, RCA pass-thru outputs, NOMAD speaker protection, MEHSA4 heat management, and conformal coated circuit board. Backed by a 2 year warranty.
Product Overview
The Rockford Fosgate M2-200X2 is a 200W 2-channel full-range Class-D marine amplifier from the M2 Element Ready series, purpose-built for powering marine speakers across the full audio spectrum. Full-Range Class-D topology delivers high-efficiency power delivery across a 20Hz-20kHz frequency response while reducing current demand on the vessel's electrical system. Rated continuous power is 50W x 2 at 4-ohm, 100W x 2 at 2-ohm, or 200W x 1 at 4-ohm bridged to mono (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 60W x 2 at 4-ohm, 107W x 2 at 2-ohm, and 215W x 1 at 4-ohm bridged.
The circuit board is conformal coated to protect electronics from dust and water, and the UV stable powder coated cast aluminium heatsink provides protection against the marine environment. Zinc nickel-plated marine grade brass connection terminals resist corrosion at the connection points. Fully adjustable 12dB/octave Butterworth high-pass and low-pass crossovers are included, along with an all-pass mode and variable infrasonic filter. RCA pass-thru outputs allow downstream amplifier chaining. Auto-Sense turn-on via high-level input removes the need for a dedicated remote wire, with a bypass switch available for vessels with Retained Accessory Power (RAP) systems. RATS tested for quality and performance and optimised using the AudioGraph PowerCube measurement tool.
Features & Benefits
Full-Range Class-D - Efficient 2-Channel Marine Amplification: Full-Range Class-D topology delivers high-efficiency power across the complete 20Hz-20kHz audio spectrum, reducing current demand on the vessel's electrical system compared to traditional Class-A/B designs while powering marine speakers with clean, accurate output.
Bridgeable to 200W Mono: The M2-200X2 can be bridged to a single mono channel delivering 200W x 1 at 4-ohm (215W dynamic), making it usable as a subwoofer amplifier in smaller builds or as a dedicated mono driver for a single full-range speaker pair in more compact marine audio systems.
C.L.E.A.N. Technology - Precision Gain Calibration: C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with dedicated input and output clip indicator LEDs, enabling precise gain calibration at setup to maximise output while minimising distortion.
Fully Adjustable Crossovers with All-Pass Mode: Both high-pass and low-pass crossovers are fully adjustable from 50Hz to 250Hz at 12dB/octave Butterworth, with an all-pass mode for full-bandwidth output when no crossover filtering is needed. A variable infrasonic filter from 50Hz to 250Hz is also available for additional low-frequency protection.
RCA Pass-Thru Outputs for Downstream Chaining: RCA pass-thru outputs are active with both RCA and high-level input, allowing the signal to be passed to an additional amplifier - such as the M2-500X1 subwoofer amplifier - without signal degradation.
Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vessels with Retained Accessory Power (RAP) systems to prevent the amplifier from remaining on after the ignition is switched off.
NOMAD, MEHSA4, and Conformal Coated Circuit Board: NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. MEHSA4 (Maximum Efficiency Heat Sink Application) reduces MOSFET temperatures, lowers distortion, and extends output device life. The conformal coated circuit board protects the electronics against dust and water ingress at the PCB level.
Technical Specs
Specification
Detail
SKU
M2-200X2
Number of Channels
2
Total Power
200W
Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N)
50W x 2
Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N)
100W x 2
Rated Power - 4-ohm Bridged (CTA-2006)
200W x 1
Dynamic Power - 4-ohm (PowerCube)
60W x 2
Dynamic Power - 2-ohm (PowerCube)
107W x 2
Dynamic Power - 4-ohm Bridged (PowerCube)
215W x 1
Circuit Topology
Full-Range Class-D
Bridgeable
Yes
Frequency Response
20 Hz - 20 kHz
THD + Noise
Less than 1.0% at 4-ohm and 2-ohm
Input Sensitivity
Low-Level: 150mV - 4V / High-Level: 450mV - 12V
Signal Input
Low-Level: 2 x RCA / High-Level: 4-Pin Molex
Signal Output
2 x RCA Pass-Thru (active with RCA or High-Level input)
Tone Controls
None
High-Pass Crossover
50 Hz - 250 Hz at 12dB/Octave Butterworth
Low-Pass Crossover
50 Hz - 250 Hz at 12dB/Octave Butterworth
All-Pass
Yes
Infrasonic Filter
Variable
Remote Controls
None
Auto-Sense Turn-On
Yes (with RAP bypass switch)
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Terminals
Zinc Nickel-Plated Marine Grade Brass
Cooling
Convection
Heatsink
UV Stable Powder Coated Cast Aluminium (Focused Mass)
Circuit Board Protection
Conformal Coated
Operating Voltage
9 - 16 VDC
Recommended Fuse (not included)
30A
Max Current Draw at 13.8V Sinewave
18A
Visual Indicators
Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out
Dimensions (H x W x D)
49 x 173 x 205mm (1.9 x 6.8 x 8.1 inch)
CTA-2006 Compliant
Yes
Quality Testing
RATS (Rockford Automated Testing System)
Warranty
2 Years
Compatible With / Goes Well With
The M2-200X2 suits marine watercraft and powersports applications requiring a compact, efficient 2-channel full-range amplifier for speaker pairs. At 18A maximum current draw and a 30A fuse requirement, it places minimal demand on the vessel's electrical system. It pairs naturally with the M2-500X1 mono subwoofer amplifier for a complete M2 series speaker and subwoofer system using the RCA pass-thru to chain the two amplifiers.
Goes Well With:
M2-500X1 - Companion M2 series 500W mono subwoofer amplifier, chainable via the M2-200X2's RCA pass-thru outputs for a complete M2 series system
M2-8H - Rockford Fosgate M2 series 8 inch 2-way horn marine speakers, a matched pairing with the M2-200X2 for in-hull or in-dash mounting
M2WL-8 / M2WL-8B - M2 series 8 inch wake tower speakers powered by the M2-200X2's stereo channels
M5-800X4 - Higher output M5 series 4-channel marine amplifier for builds requiring more power than the M2-200X2 can provide per channel
RFW4R / RFW4B - Rockford Fosgate 4 AWG amplifier wiring kits (red or black) matched to the M2-200X2's 4 AWG power wire requirement
Frequently Asked Questions
What is the difference between the M2-200X2 and the M5-800X4?
The M2-200X2 is a 2-channel full-range Class-D marine amplifier rated at 100W x 2 at 2-ohm from the M2 Element Ready series, designed for accessible, space-efficient marine speaker amplification. The M5-800X4 is a 4-channel Class-AD marine amplifier rated at 100W x 4 at 2-ohm from the premium M5 series, adding two additional channels, IPX6 water intrusion rating, Punch EQ2, the PRESET feature, and significantly more installation flexibility. Choose the M2-200X2 for a compact, economical 2-channel solution; choose the M5-800X4 for a 4-channel build with premium marine protection.
Can the M2-200X2 be used to power a subwoofer?
Yes, when bridged to mono. In bridged mode the M2-200X2 delivers 200W x 1 at 4-ohm (215W dynamic), which is sufficient to drive a single 4-ohm marine subwoofer at moderate output levels. For dedicated subwoofer amplification with more power and a tunable Punch EQ, the M2-500X1 is the recommended companion amplifier. The M2-200X2's RCA pass-thru outputs allow it to chain directly to the M2-500X1 in a two-amplifier system.
Does the M2-200X2 need a dedicated remote turn-on wire?
Not necessarily. The Auto-Sense feature activates the amplifier automatically when it detects a high-level (speaker) input signal from the source unit, removing the need for a separate remote wire. A RAP bypass switch is also included for vessels where the source unit continues to output a speaker signal after the ignition is switched off, preventing the amplifier from remaining on unintentionally.
What crossover options are available on the M2-200X2?
The M2-200X2 offers a fully adjustable high-pass crossover, a fully adjustable low-pass crossover, and an all-pass mode, all using 12dB/octave Butterworth slopes adjustable from 50Hz to 250Hz. A variable infrasonic filter is also available. This makes it suitable for use as a speaker amplifier in all-pass mode, a high-passed mid-range amplifier, or in bridged mono as a low-passed subwoofer amplifier, depending on the system configuration.
What fuse does the M2-200X2 require and is it included?
The M2-200X2 requires a 30A fuse. The fuse is not included in the box and must be sourced separately. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Note that the 30A fuse requirement is significantly lower than the 80A required by the M2-500X1, reflecting the M2-200X2's lower current draw of 18A maximum.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
1,000W Class-AD 4-Channel Full-Range Amplifier Class-A Sound Quality, Class-D Efficiency, Constant Power, 2-Year Warranty.
Product Overview
The Rockford Fosgate Power T1000-4AD is a 1,000W 4-channel full-range amplifier built on Rockford Fosgate's Class-AD technology an amplifier topology combining the sound quality characteristics of a Class-A design with the power efficiency of Class-D. Where Class-BD was developed for brute subwoofer power, Class-AD is Rockford Fosgate's answer for high-fidelity, full-range speaker amplification designed for front stage component systems, full-range 4-way installations, and any application where audio quality across the full frequency spectrum is the priority.
Sound quality is enhanced through dynamic switching frequency control a technique that optimises the amplifier's internal switching frequency dynamically for improved linearity and reduced audible artefacts. Constant Power circuitry produces optimised output across a range of impedances. Combined with MOSFET power supply and output stages, 24dB/octave crossover, RCA pass-thru, and a confirmed 2-year warranty, the T1000-4AD is Rockford Fosgate's premium full-range 4-channel Power series amplifier.
Key Specifications
Power output: 1,000W total (4-channel — per-channel rated power at specific impedance not confirmed — see Red-flags)
Amplifier class: Class-AD (Class-A sound quality + Class-D efficiency)
Configuration: 4-channel, full-range
Constant Power: Yes — optimised output across a range of impedances
Dynamic switching frequency control: Yes
Crossover: 24dB/octave
2/4 channel input switch: Yes
RCA pass-thru outputs: Yes
MOSFET power supply: Yes
MOSFET output stage: Yes
Power/ground connectors: 4 gauge
Speaker connections: Audiophile grade
Signal-to-noise ratio: Not specified — confirm with Rockford Fosgate
THD: Not specified — confirm with Rockford Fosgate
Frequency response: Not specified — confirm with Rockford Fosgate
Dimensions: Not specified — confirm with Rockford Fosgate
Weight: Not specified — confirm with Rockford Fosgate
Warranty: 2 years ✓
Features & Benefits
Class-AD — Class-A Sound Quality with Class-D Efficiency — Class-A amplifiers are widely regarded for their linearity and low distortion but are thermally inefficient and physically large. Class-D amplifiers are highly efficient but have historically made compromises in audio quality. Rockford Fosgate's Class-AD combines the sonic characteristics of Class-A operation with the power efficiency of Class-D — delivering high-fidelity full-range amplification in a format suited to demanding car audio installations.
Dynamic Switching Frequency Control — A proprietary technique that dynamically adjusts the amplifier's internal switching frequency to optimise linearity and minimise switching-related artefacts — contributing to the Class-AD's high-fidelity performance across the full audio frequency range. This is the technical mechanism that distinguishes Class-AD's audio quality from standard Class-D designs.
Constant Power — Optimised Output Across Impedances — The Constant Power circuitry maintains optimised output across a range of speaker impedance loads — providing consistent performance whether 4Ω or 2Ω speakers are connected, without the significant power variation seen in standard amplifier designs at different load impedances.
1,000W 4-Channel Full-Range Configuration — 250W per channel (total rated — confirm per-channel at specific impedance from the official datasheet) across four full-range channels. Designed for high-output front and rear speaker systems where component speakers or full-range coaxials require substantial clean power to achieve their performance potential.
RCA Pass-Thru Outputs — Signal pass-through allows the headunit RCA signal to be looped to a downstream amplifier — enabling the T1000-4AD to drive four speaker channels while simultaneously feeding a dedicated subwoofer amplifier for a complete multi-amplifier system.
24dB/Octave Crossover — Steep crossover slope for precise frequency band management — enabling high-pass filtering on front and rear speakers and the option to configure rear channels for subwoofer use in mixed speaker/subwoofer builds.
2/4 Channel Input Switch — Accepts either a 2-channel stereo input (internally distributed to all four outputs) or discrete 4-channel front and rear RCA inputs — accommodating both 2-channel and 4-channel headunit preamp configurations.
MOSFET Power Supply and Output Stage — MOSFET implementation across both supply and output stages supports the high-current, low-noise delivery required for Class-AD's high-fidelity operation.
4 Gauge Power and Ground Connectors — Appropriate power delivery infrastructure for a 1,000W 4-channel amplifier.
Audiophile Grade Speaker Connections — High-quality output terminals across all four channels for low-resistance, high-integrity speaker connections.
2-Year Warranty — Confirmed manufacturer warranty — two years of coverage on Rockford Fosgate's flagship full-range 4-channel Power series amplifier.
Technical Specs
Specification
Detail
Brand
Rockford Fosgate
Part Number
T1000-4AD
Series
Power
Configuration
4-Channel, Full-Range
Amplifier Class
Class-AD
Power Output (Total)
1,000W
Power per Channel @ 2Ω
Not specified — confirm with Rockford Fosgate
Power per Channel @ 4Ω
Not specified — confirm with Rockford Fosgate
Bridged Output
Not specified — confirm with Rockford Fosgate
Constant Power
Yes
Dynamic Switching Frequency Control
Yes
Crossover
24dB/Octave
2/4 Channel Input Switch
Yes
RCA Pass-Thru Outputs
Yes
MOSFET Power Supply
Yes
MOSFET Output Stage
Yes
Power/Ground Connectors
4 Gauge
Speaker Connections
Audiophile Grade
Signal-to-Noise Ratio
Not specified
THD
Not specified
Frequency Response
Not specified
Dimensions
Not specified
Weight
Not specified
Warranty
2 Years ✓
Compatible With / Goes Well With
Designed for:
High-fidelity full-range front and rear speaker systems
Front stage component speaker systems requiring high-power, low-distortion amplification
Multi-amplifier builds: T1000-4AD for speaker channels + dedicated mono sub amp via RCA pass-thru
Demanding audiophile-oriented car audio builds where audio quality is the primary concern
Pairs well with:
Rockford Fosgate Power series mono subwoofer amplifiers (T1000-1BDCP, T1500-1BDCP, T2500-1BDCP) via RCA pass-thru
Rockford Fosgate Power series component front stage speakers
4-gauge amplifier wiring kits
Rockford Fosgate or aftermarket 4-channel RCA cables
Frequently Asked Questions
What does Class-AD mean and why does it matter for full-range speakers?
Class-AD combines the sound quality characteristics of Class-A amplification with the power efficiency of Class-D. Class-A designs are highly linear and produce very low distortion but are thermally inefficient. Class-D is efficient but involves switching-based operation that can introduce artefacts. Rockford Fosgate's Class-AD and its dynamic switching frequency control aim to deliver high-fidelity full-range performance with efficient power delivery — a meaningful advantage for component speaker systems that operate across the full 20Hz–20kHz range.
What is dynamic switching frequency control?
Dynamic switching frequency control is a technique where the amplifier dynamically adjusts its internal switching frequency based on the signal being amplified. This optimises linearity at each operating point, reducing the audible by-products of switching-mode amplification — contributing to the Class-AD's high-fidelity performance compared to standard fixed-frequency Class-D designs.
What is the confirmed per-channel power output of the T1000-4AD?
The total rated power is 1,000W across four channels. Per-channel power at 2Ω and 4Ω is not confirmed in the supplier data — pull the official Rockford Fosgate T1000-4AD datasheet for the full power specification table, including per-channel RMS at each impedance.
How does the T1000-4AD differ from the T600-4?
The T1000-4AD delivers 1,000W total (vs the T600-4's 600W), uses Rockford Fosgate's Class-AD technology with dynamic switching frequency control, and is specifically designed for high-fidelity full-range use. Both include RCA pass-thru. The T600-4 uses a conventional MOSFET design. For audiophile-oriented builds where audio quality is the priority, the T1000-4AD is the appropriate choice.
Is the T1000-4AD suitable for running subwoofers on the rear channels?
Yes. The 24dB/octave crossover allows the rear channels to be configured in low-pass mode for subwoofer use. However, the T1000-4AD's primary design intent is high-fidelity full-range speaker amplification via Class-AD technology — for dedicated subwoofer channels, a Class-BD mono amplifier (T1000-1BDCP, T1500-1BDCP, T2500-1BDCP) connected via the RCA pass-thru is the more appropriate and more powerful solution.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Offers More Power, More Quality and More Bang for Your Buck!
Cobalt series 2-channel class A/B car amplifier.
Specifications:
RMS Power Rating: 4 ohms: 60 watts x 2 chan. / 2 ohms: 80 watts x 2 chan. / Bridged, 4 ohms: 160 watts x 1 chan.
Max power output: 300 watts
MOSFET power supply
Tri-mode and bridgeable operation
LED power and protect indicators
Illuminated blue LED stripe design
Selectable bass boost (0, 6, 12 dB)
2/1 channel operation
High-level inputs (signal sensing for automatic turn on)
3-Way system protection circuitry (thermal, short circuit, and overload)
Heavy duty aluminum alloy convection heatsink
Chrome-plated RCA level input
Chrome-plated screw terminals
Input sensitivity (175mV-8V)
Damping factor (>100)
Continuously variable high-pass filter (50-500 Hz)
Continuously variable low-pass filter (50-500 Hz, 2nd order 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-30,000 Hz
Dimensions: 7-15/16"L x 8-1/8"W x 2-1/8"H
8-gauge power and ground wiring is required for installation
Legendary Products & Support From Authorized Dealers
When you choose Orion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Orion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Orion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Orion dealer today!
Unleash Your Amplifier's Potential: How Stiffening Capacitors Enhance Power and Sound QualityStiffening capacitors strengthen/ stabilize the voltage that feeds your amplifiers. In many instances, this can greatly improve the power and sound quality performance of your amplifiers. The bigger the amps, the more likely you need a stiffening cap.Features: Gold plated Best possible Conductivity 2 Holes Packed in hang sell, full-colour blister pack Specifications: 91mm long
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
