White 3 LED Front End Outline Marker with Inbuilt Reflector No Tools, 3M Tape, ADR/ECE, IP67. Product Overview The LED Autolamps EU38WMHDB is a white LED front end outline (FEO) marker lamp with an integrated reflex reflector one of the easiest-to-install marker lamps in the LED Autolamps range. At just 100mm x 38mm x 13mm with a 13mm ultra-low profile depth, the EU38WMHDB sits nearly flush with the mounting surface, maintaining clean aerodynamic lines on modern trailers, trucks, and caravans. Installation requires no tools drill one 8mm hole for the cable, remove the protective film from the 3M adhesive backing, and simply push the lamp into place using the two serrated plug locators. The curved diamond pattern polycarbonate lens houses 3 LEDs for the main white output and an integrated reflex reflector for passive reflective compliance. ADR and ECE approved, IP67 rated, and backed by a 5-year warranty the EU38WMHDB is a practical, legally compliant white front end marker for any 12V or 24V trailer and commercial vehicle application. Key Specifications Function: White front end outline (FEO) marker with integrated reflex reflector LED count: 3 LEDs LED colour: White Lens: Polycarbonate curved diamond pattern Dimensions: 100mm x 38mm x 13mm Locator spacing: 60mm centres (2x serrated plugs) Cable: Approx. 35cm Mount: 3M adhesive tape no tools required Mounting hole: 1x 8mm hole for cable IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: EU38WMHDB Features & Benefits No tools required: The 3M adhesive tape and serrated plug locator system allows installation without screws, drills, or brackets simply press into place for a fast, clean result Ultra-slim 13mm profile: At just 13mm deep, the EU38WMHDB is one of the most low-profile FEO markers available, maintaining clean lines on modern trailers and caravans Integrated reflex reflector: Combines active LED output and passive reflector compliance in a single compact unit 3 white LEDs: Bright white LED output for front end outline marking on 12V and 24V vehicles and trailers Curved diamond pattern lens: Polycarbonate lens with signature EU38 series curved diamond pattern for a contemporary appearance ADR and ECE approved: Fully compliant with Australian Design Rules and ECE standards for front end outline marker use on road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial truck applications 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU EU38WMHDB Brand LED Autolamps Series EU38 Series Function White Front End Outline Marker + Inbuilt Reflector LED Count 3 LED Colour White Lens Polycarbonate curved diamond pattern Dimensions 100mm x 38mm x 13mm Locator Spacing 60mm centres (2x serrated plugs) Cable Length Approx. 35cm Mount Type 3M adhesive tape no tools required Mounting Hole 1x 8mm for cable IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Packaging Single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring white ADR-compliant front end outline markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Pairs well with: LED Autolamps 42AM amber side direction indicator LED Autolamps 35CARM red/amber side marker LED Autolamps combination rear lamps Frequently Asked Questions Does this marker require drilling to install? Only one 8mm hole is required for the cable. The lamp body is secured entirely by the 3M adhesive tape and two serrated plug locators no screws, brackets, or additional holes are needed. Is this lamp ADR approved for Australian road use? Yes the EU38WMHDB is ADR and ECE approved, confirming it meets Australian legal requirements for white front end outline marker use on trailers and road vehicles. Does this lamp include a reflex reflector? Yes an integrated reflex reflector is built into the lamp body, providing both active LED output and passive reflective compliance in a single unit. What voltage systems does this lamp suit? The EU38WMHDB operates on 12–24V DC, making it compatible with both 12V passenger and caravan trailer applications and 24V commercial truck systems. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm mounting requirements and quantity needed before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White 3 LED Front End Outline Marker with Inbuilt Reflector No Tools, 3M Tape, ADR/ECE, IP67. Product Overview The LED Autolamps EU38BWMHDB is a white LED front end outline (FEO) marker lamp with an integrated reflex reflector from the EU38 series one of the most widely used low-profile marker lamp designs on Australian trailers and commercial vehicles. At just 100mm x 38mm x 13mm with an ultra-slim 13mm profile depth, the EU38BWMHDB fits neatly onto trailer frames, cab corners, and body panels without protruding. Installation requires no tools drill one 8mm hole for the cable, remove the protective film from the 3M adhesive backing, and simply push the lamp into place using the two serrated plug locators on 60mm centres. The curved diamond pattern polycarbonate lens houses 3 LEDs for white output with an integrated reflex reflector for combined active and passive compliance. ADR and ECE approved, IP67 rated, and backed by a 5-year warranty. Note: The EU38BWMHDB shares all specifications with the EU38WMHDB. The "B" prefix in the SKU is believed to denote a bulk/bare pack variant confirm packaging format with your retailer or supplier before ordering if blister packaging is required. Key Specifications Function: White front end outline (FEO) marker with integrated reflex reflector LED count: 3 LEDs LED colour: White Lens: Polycarbonate curved diamond pattern Dimensions: 100mm x 38mm x 13mm Locator spacing: 60mm centres (2x serrated plugs) Cable: Approx. 35cm Mount: 3M adhesive tape no tools required Mounting hole: 1x 8mm hole for cable IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: EU38BWMHDB Features & Benefits No tools required: The 3M adhesive tape and serrated plug locator system allows installation without screws, drills, or brackets Ultra-slim 13mm profile: One of the most low-profile FEO markers available, maintaining clean lines on modern trailers and caravans Integrated reflex reflector: Combines active LED output and passive reflector compliance in a single compact unit 3 white LEDs: Bright white LED output for front end outline marking on 12V and 24V vehicles and trailers Curved diamond pattern polycarbonate lens: Durable UV-resistant lens in the signature EU38 series style ADR and ECE approved: Fully compliant with Australian Design Rules and ECE standards IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial truck applications 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU EU38BWMHDB Brand LED Autolamps Series EU38 Series Function White Front End Outline Marker + Inbuilt Reflector LED Count 3 LED Colour White Lens Polycarbonate curved diamond pattern Dimensions 100mm x 38mm x 13mm Locator Spacing 60mm centres (2x serrated plugs) Cable Length Approx. 35cm Mount Type 3M adhesive tape no tools required Mounting Hole 1x 8mm for cable IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Packaging Single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring white ADR-compliant front end outline markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions How does this lamp differ from the EU38WMHDB? The EU38BWMHDB and EU38WMHDB share identical specifications same function, dimensions, LEDs, and compliance. The "B" in the EU38BWMHDB SKU is believed to denote a bulk or bare pack variant. Confirm packaging format with your retailer if blister packaging is required for your application. Does this marker require drilling to install? Only one 8mm hole is required for the cable. The lamp body is secured entirely by the 3M adhesive tape and two serrated plug locators no screws, brackets, or additional holes are needed. Is this lamp ADR approved for Australian road use? Yes the EU38BWMHDB is ADR and ECE approved, confirming it meets Australian legal requirements for white front end outline marker use on trailers and road vehicles. Does this lamp include a reflex reflector? Yes an integrated reflex reflector is built into the lamp body, providing both active LED output and passive reflective compliance in a single unit. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm mounting requirements and quantity needed before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Green LED Courtesy Lamp 16 LEDs, Low Profile, Caravan & Vehicle Interior Lighting. Product Overview The LED Autolamps 68G is a 12V green LED courtesy lamp from the 68 series a low-profile interior lighting solution producing green-tinted illumination for vehicle cabin courtesy lighting, step lighting, and night-vision-friendly interior applications. Measuring just 75mm x 17mm with a low profile design, the 68G runs on 12V only, draws 0.06A at 13.8V, and is backed by a 3-year warranty. Green courtesy lighting is popular in caravans, motorhomes, trucks, and marine vessels for several reasons: green light preserves night vision better than white light during night-time navigation, it provides sufficient ambient illumination for moving safely without disrupting sleep, and it creates a distinctive, practical ambiance in working vehicle environments. The 68G's 16 LED array delivers consistent green output across the full lamp body. Key Specifications LED colour: Green LED count: 16 Dimensions: 75mm x 17mm Input voltage: 12V only Current draw: 0.06A @ 13.8V Low profile design Warranty: 3 years Brand: LED Autolamps SKU: 68G Features & Benefits Green LED output: Green courtesy lighting is preferred for night-vision-friendly illumination in caravans, motorhomes, trucks, and marine applications where preserving night adaptation is important 16 LEDs: Consistent, even green illumination across the 75mm lamp body for effective courtesy and ambient lighting Low profile 75mm x 17mm design: Compact and unobtrusive, fitting easily in tight interior spaces including overhead panels, step recesses, and cabinet undersides Ultra-low 0.06A current draw: Minimal drain on the vehicle's 12V electrical system suitable for always-on courtesy lighting applications 12V only: Direct compatibility with caravan, motorhome, truck, and marine 12V electrical systems 3-year warranty: Backed by LED Autolamps' 3-year product warranty Technical Specs Specification Detail SKU 68G Brand LED Autolamps Series 68 Series LED Colour Green LED Count 16 Dimensions 75mm x 17mm Input Voltage 12V only Current Draw 0.06A @ 13.8V Design Low profile Warranty 3 Years Compatible With Suits all 12V caravan, motorhome, truck, marine, and vehicle interior applications requiring green courtesy lighting including: Caravan and motorhome night-friendly interior lighting Truck and cab interior step and courtesy lighting Marine vessel night-navigation courtesy lighting Vehicle entry step lighting Frequently Asked Questions Why use green courtesy lighting? Green light preserves night vision better than white or yellow light, making it ideal for night-time use in caravans, motorhomes, and marine vessels where occupants need to move safely without fully waking or disrupting dark adaptation. It provides sufficient ambient light to navigate without the harsh brightness of white LEDs. Is this lamp compatible with 24V systems? No the 68G is 12V only. Do not connect to 24V electrical systems. What are the dimensions of this lamp? The 68G measures 75mm x 17mm a very compact, low-profile form factor suited to tight interior mounting locations. Is there a white version of this lamp? Yes the LED Autolamps 68W is the same lamp in standard white output. A soft white/ivory version (68I) and red version (68R) are also available. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Blue LED Courtesy Lamp Chrome Housing, Blue Lens, 16 LEDs, Low Profile Interior Use. Product Overview The LED Autolamps 68B is a 12V blue LED courtesy lamp featuring a chrome housing and blue lens one of several coloured courtesy lamp options in the LED Autolamps 68 series alongside green (68G), red (68R), and white (68W) variants. Measuring 75mm x 17mm with a low profile design, the 68B runs on 12V only, draws 0.06A at 13.8V, and is backed by a 3-year warranty. Blue courtesy lighting is popular in truck cabs, car interiors, and caravan sleeping areas for ambient and mood lighting applications providing a soft, distinctive blue glow for interior ambiance without the harsh brightness of white LEDs. The chrome housing adds a premium, finished appearance suited to styled vehicle interiors. Interior use only. Supplied with a 10cm cable and backed by LED Autolamps' 3-year warranty. Key Specifications LED colour: Blue LED count: 16 Lens: Blue Housing: Chrome Dimensions: 75mm x 17mm (confirmed) Cable: 10cm Input voltage: 12V only Current draw: 0.06A @ 13.8V Application: Interior use only Warranty: 3 years Packaging: Blister pack Brand: LED Autolamps SKU: 68B Features & Benefits Blue LED courtesy lamp: Distinctive blue light output for ambient and mood interior lighting in truck cabs, caravans, and vehicle interiors Chrome housing: Premium chrome finish adds a quality aesthetic to the lamp surround, complementing styled vehicle interiors 16 LEDs: Consistent blue illumination across the 75mm lamp body for effective ambient courtesy lighting Ultra-low 0.06A current draw: Minimal drain on the 12V electrical system suitable for always-on courtesy and mood lighting Low profile 75mm x 17mm design: Compact, unobtrusive form factor for tight interior mounting locations 10cm cable: Short lead for direct wiring to a nearby circuit 12V only interior use: Designed specifically for 12V interior applications; not suitable for outdoor use 3-year warranty: Backed by LED Autolamps' 3-year product warranty Technical Specs Specification Detail SKU 68B Brand LED Autolamps Series 68 Series LED Colour Blue LED Count 16 Lens Blue Housing Chrome Dimensions 75mm x 17mm (confirmed) Cable Length 10cm Input Voltage 12V only Current Draw 0.06A @ 13.8V Application Interior use only Warranty 3 Years Packaging Blister Pack Compatible With Suits all 12V vehicle interior applications requiring blue courtesy or ambient lighting including: Truck and cab interior ambient lighting Caravan and motorhome mood lighting Car interior step and ambient courtesy lighting Marine vessel interior ambient lighting Frequently Asked Questions Is this lamp for interior or exterior use? Interior use only the 68B is not rated for outdoor or exterior installation. For IP67-rated exterior lighting, refer to other products in the LED Autolamps range. Is this lamp compatible with 24V systems? No the 68B is 12V only. Do not connect to 24V electrical systems. What are the confirmed dimensions of this lamp? The confirmed dimensions are 75mm x 17mm based on multiple verified sources including Beacons and Lightbars and ledautoparts.co.uk. The supplier data listing "100mm x 25mm x 10mm" appears to be a data entry error confirm with your retailer if physical dimensions are critical for your installation. Is there a white or green version of this lamp? Yes the 68 series is available in white (68W), green (68G), red (68R), blue (68B), and soft white/ivory (68I) variants. All share the same 75mm x 17mm dimensions and 12V specification. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White Front End Outline Marker & Licence Plate Lamp Recessed 3mm, ECE Approved, 12/24V. Product Overview The LED Autolamps 7922WMCSB is a dual-function white LED lamp from the 7922 Series serving as both a white front end outline marker and a licence plate lamp in a single ultra-slim recessed unit. The 7922 Series is low-profile at only 3mm, ECE road approved, IP67 rated, 12–24V multivolt, 5-year warranty, and measures 79mm x 22mm x 3mm. Recessed mount with screws supplied The "CS" suffix denotes chrome surround, "B" = bulk single unit. The 7922WMCSB is the individual supply version the twin pack is the 7922WM2. At just 3mm deep, the 7922 Series is one of the slimmest recessed marker and licence plate lamps available. Supplied as a single unit. Key Specifications Functions: White front end outline marker + licence plate lamp (dual function) Surround: Chrome Dimensions: 79mm x 22mm x 3mm Mount type: Recessed screws supplied IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE road approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 7922WMCSB Features & Benefits Dual function white marker and licence plate lamp: Single lamp provides both white front end outline marker output and licence plate illumination, reducing lamp count and wiring complexity Ultra-slim 3mm depth: Only 3mm deep one of the slimmest recessed marker/licence plate lamps available ideal for flush installations with minimal depth clearance Chrome surround: Premium chrome finish for a clean, professional appearance around the recessed lamp Recessed mount with screws: Recessed mount with screws supplied mounts flush within the panel for a discreet, professional result ECE road approved: Certified for both functions on Australian and international road vehicles IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 7922WMCSB Brand LED Autolamps Series 7922 Series Functions White Front End Outline Marker + Licence Plate Lamp Surround Chrome Dimensions 79mm x 22mm x 3mm Mount Type Recessed screws supplied IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE road approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring a compact recessed white marker and licence plate lamp: Trailers and caravans requiring a combined marker and licence plate solution Applications where minimal lamp depth is critical Frequently Asked Questions What dual functions does this lamp provide? The 7922WMCSB provides white front end outline marker output and licence plate illumination in a single 79mm x 22mm unit. How deep is this lamp? Just 3mm one of the slimmest recessed lamp formats available. What is the difference between the 7922WMCSB and the 7922WM2? The 7922WM2 is a twin blister pack of two lamps. The 7922WMCSB is a single bulk unit. Both are the same 7922 Series lamp. Is this lamp ECE approved? Yes ECE road approved What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Red Rear End Outline Marker Twin Pack Recessed 3mm, ECE Approved, 12/24V. Product Overview The LED Autolamps 7922RM2 is a twin blister pack of 7922 Series red rear end outline markers two lamps per pack for complete left and right rear marker installation in a single purchase. Sharing the same ultra-slim 79mm x 22mm x 3mm recessed form factor, ECE road approval, IP67 waterproofing, and 12/24V multivolt operation as the white 7922WM2 (front marker) listed earlier in this session, the 7922RM2 is the red rear-facing equivalent. At just 3mm deep, the 7922 Series is one of the slimmest recessed marker lamps available. Supplied with screws for recessed installation. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Red rear end outline marker Dimensions: 79mm x 22mm x 3mm Mount type: Recessed screws supplied IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE road approved Warranty: 5 years Pack quantity: 2 (twin blister) Brand: LED Autolamps SKU: 7922RM2 Features & Benefits Twin blister pack: Two red rear end outline markers per pack for left and right rear fitment Ultra-slim 3mm depth: One of the slimmest recessed rear marker lamps available Recessed mount: Flush installation for a clean, professional appearance screws supplied Red LED output: ADR and ECE compliant red rear end outline marker output ECE road approved: Certified for red rear end outline marker use on road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 7922RM2 Brand LED Autolamps Series 7922 Series Function Red Rear End Outline Marker Dimensions 79mm x 22mm x 3mm Mount Type Recessed screws supplied IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE road approved Warranty 5 Years Pack Quantity 2 (twin blister) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring red recessed rear end outline markers: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Frequently Asked Questions How many lamps are in this twin pack? Two one for each side of the vehicle or trailer rear. Is this lamp a front or rear marker? The 7922RM2 is a red rear end outline marker for the rear of the vehicle or trailer. For the white front end outline marker, refer to the 7922WM2. Is this lamp ECE approved? Yes ECE road approved for red rear end outline marker use. How deep is this lamp when fitted? Just 3mm one of the slimmest recessed markers available. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amber Side Marker Twin Pack Recessed 3mm, ECE Approved, 12/24V. Product Overview The LED Autolamps 7922AM2 is a twin blister pack of 7922 Series amber side markers two lamps per pack for complete left and right side marker installation. Sharing the same ultra-slim 79mm x 22mm x 3mm recessed form factor, ECE road approval, IP67 waterproofing, and 12/24V multivolt operation as the rest of the 7922 Series listed in this session, the 7922AM2 provides amber side marker output for the sides of trailers and commercial vehicles. At just 3mm deep, the 7922 Series is one of the slimmest recessed marker lamps available. Supplied with screws for recessed installation. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Amber side marker Dimensions: 79mm x 22mm x 3mm Mount type: Recessed screws supplied IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE road approved Warranty: 5 years Pack quantity: 2 (twin blister) Brand: LED Autolamps SKU: 7922AM2 Features & Benefits Twin blister pack: Two amber side markers per pack for complete left and right side fitment Ultra-slim 3mm depth: One of the slimmest recessed side marker lamps available Recessed mount: Flush installation for a clean, professional appearance screws supplied Amber LED output: ECE compliant amber side marker output ECE road approved: Certified for amber side marker use on road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 7922AM2 Brand LED Autolamps Series 7922 Series Function Amber Side Marker Dimensions 79mm x 22mm x 3mm Mount Type Recessed — screws supplied IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE road approved Warranty 5 Years Pack Quantity 2 (twin blister) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring amber recessed side markers: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Frequently Asked Questions How many lamps are in this twin pack? Two one for each side of the vehicle or trailer. What is the difference between the 7922AM2 and the 7922RM2? The 7922AM2 is an amber side marker while the 7922RM2 is a red rear end outline marker. Both are from the 7922 Series in the same 79mm x 22mm x 3mm recessed format. Is this lamp ECE approved? Yes ECE road approved for amber side marker use. How deep is this lamp when fitted? Just 3mm one of the slimmest recessed markers available. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Category 6 Side Direction Indicator Twin Pack Amber Lens, GVM Upgrade, 3M Tape, ECE/EMC, 9–32V. Product Overview The LED Autolamps 77AM2 is the amber coloured lens version of the 77 Series Category 6 side direction indicator twin pack the companion to the clear lens 77ACM2 listed earlier in this session. A twin pack containing left-hand side and right-hand side lamps, with coloured amber lens, Category 6 side direction indicator compliance, multi-volt 12V & 24V, 3M tape fitting design, and ADR approved. The 77AM2 is suitable for vehicle GVM upgrades including the 79 and 200 Series Landcruiser Category 6 side direction indicators in a twin blister pack with ECE approval and 9–32V operation. Cable length 300mm, ECE and EMC approved. Installation: left or right-hand mountable, drill 10mm hole into flat surface and mount horizontally to the ground with 3M tape and serrated plug LEDs must face the rear of the vehicle. Backed by LED Autolamps' 5-year warranty.  Key Specifications Function: Category 6 side direction indicator Lens: Amber (coloured) Pack contents: Left-hand side + right-hand side (twin blister) Dimensions: 77mm x 52mm x 22mm Cable length: 300mm Fitting system: 3M Tape + serrated plug (10mm hole) IP rating: IP67 Input voltage: 9–32V DC (multivolt) LED orientation: LEDs face rear of vehicle Mount: Left or right-hand mountable Compliance: ECE and EMC approved, ADR approved, Category 6 Warranty: 5 years Brand: LED Autolamps SKU: 77AM2 Features & Benefits Category 6 approval: Certified for Category 6 side direction indicator use required for GVM upgrade compliance in Australia Amber coloured lens: Traditional amber tinted lens the coloured lens alternative to the clear lens 77ACM2 GVM upgrade compatible: Suitable for vehicle GVM upgrades including the 79 and 200 Series Landcruiser Twin pack: Contains one left-hand and one right-hand lamp for complete side indicator installation 3M Tape and serrated plug: Fast, tool-minimal fitting drill 10mm hole, plug and tape no visible external fixings 300mm cable: Pre-wired for standard installation configurations ECE and EMC approved: ECE and EMC approved for Australian and international road vehicle compliance  9–32V broad voltage range: Covers all 12V and 24V systems with significant headroom IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 77AM2 Brand LED Autolamps Series 77 Series Function Category 6 Side Direction Indicator Lens Amber (coloured) Pack Contents LHS + RHS (twin blister) Dimensions 77mm x 52mm x 22mm Cable Length 300mm Fitting System 3M Tape + serrated plug (10mm hole) LED Orientation Faces rear of vehicle IP Rating IP67 Input Voltage 9–32V DC (multivolt) Compliance ECE, EMC, ADR Category 6 Warranty 5 Years Compatible With Suits all 12V and 24V vehicles requiring Category 6 side direction indicators: GVM upgrade applications including 79 Series and 200 Series Landcruiser M2-M3, N1 class vehicles over 6 metres, and all N2-N3 class vehicles Side guard mounting applications Frequently Asked Questions What is the difference between the 77AM2 and the 77ACM2? Both are 77 Series Category 6 side direction indicator twin packs. The 77AM2 has an amber coloured lens while the 77ACM2 has a clear lens with internal amber LEDs. All other specifications are identical. Is this lamp suitable for GVM upgrades? Yes suitable for vehicle GVM upgrades including the 79 and 200 Series Landcruiser. Does the twin pack include both left and right-hand lamps? Yes the twin pack contains both left-hand side and right-hand side lamps. Which direction do the LEDs face? LEDs must face the rear of the vehicle confirm orientation before drilling the 10mm mounting hole. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Cat 6 Side Direction Indicator with Vehicle Patch Lead Suits Land Cruiser Sahara, GVM Upgrade, 9–32V. Product Overview The LED Autolamps 77ACMB-LCSAHARA is a Cat 6 side direction indicator from the 77 Series the vehicle-specific patch lead version pre-wired to suit the Land Cruiser Sahara. The "LCSAHARA" suffix denotes the vehicle-specific patch lead harness this is a plug-and-play GVM upgrade indicator kit designed to connect directly to the Land Cruiser Sahara's existing wiring without modification. Based on the 77ACMB (Cat 6 clear lens indicator, single unit), the 77ACMB-LCSAHARA pairs the same 77 Series lamp with a vehicle-specific patch lead for simplified GVM upgrade fitment. The 77 Series Cat 6 patch indicator is suitable for vehicle GVM upgrade, low profile compact design, easy fit with 3M tape and plug, IP67 rated, 9–32V, 5-year warranty, 77mm x 52mm x 22mm.  Key Specifications Function: Cat 6 side direction indicator Lens: Clear with internal amber LEDs Vehicle patch: Land Cruiser Sahara specific Application: GVM upgrade Dimensions: 77mm x 52mm x 22mm Fitting system: 3M tape + serrated plug, vehicle-specific patch lead IP rating: IP67 Input voltage: 9–32V DC (multivolt) Compliance: ECE Category 6 approved Warranty: 5 years Brand: LED Autolamps SKU: 77ACMB-LCSAHARA Features & Benefits Vehicle-specific patch lead: Pre-wired patch lead harness configured for the Land Cruiser Sahara plug-and-play installation without vehicle wiring modification Cat 6 side direction indicator: ECE Category 6 compliant for GVM upgrade compliance requirements GVM upgrade compatible: Specifically designed to meet the Cat 6 side indicator requirement for vehicle GVM upgrade approval Clear lens with amber LEDs: Modern clean lens appearance for amber side direction indicator output Easy fit 3M tape and plug: 3M tape and serrated plug lamp fitting system for fast, tool-minimal installation 9–32V broad voltage range: Wide voltage coverage for all 12V and 24V applications IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 77ACMB-LCSAHARA Brand LED Autolamps Series 77 Series Function Cat 6 Side Direction Indicator Lens Clear internal amber LEDs Vehicle Patch Land Cruiser Sahara Dimensions 77mm x 52mm x 22mm Fitting System 3M tape + serrated plug + vehicle patch lead IP Rating IP67 Input Voltage 9–32V DC (multivolt) Compliance ECE Category 6 Warranty 5 Years Compatible With Specifically suits: Land Cruiser Sahara GVM upgrade Cat 6 side direction indicator requirement Frequently Asked Questions What vehicle does the 77ACMB-LCSAHARA suit? The 77ACMB-LCSAHARA is the vehicle-specific Cat 6 indicator for the Land Cruiser Sahara (also noted for J250 Prado MY24 applications). Confirm your exact vehicle model and year with your installer or LED Autolamps before purchasing. What is the difference between the 77ACMB-LCSAHARA and the standard 77ACM2? The 77ACMB-LCSAHARA is a single unit with a vehicle-specific patch lead for the Land Cruiser Sahara. The 77ACM2 is a twin blister pack without a vehicle-specific patch lead for universal installation. Is this lamp compatible with GVM upgrades? Yes the 77 Series patch indicator is suitable for vehicle GVM upgrades  as a Cat 6 side direction indicator. Does this require drilling? A 10mm hole is required for the serrated plug fitting no other drilling is needed for the 3M tape and plug system. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Confirm vehicle compatibility before purchasing. Contact the seller if you're unsure. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Cat 6 Side Direction Indicator Clear Lens, Single Blister Pack, 9–32V, IP67. Product Overview The LED Autolamps 77ACM is a Cat 6 side direction indicator from the 77 Series the single blister pack version of the clear lens variant. Where the 77ACM2 is a twin blister pack (left-hand + right-hand), the 77ACM is a single blister pack one lamp per pack suited to replacement, repair, or applications where only one side indicator is required. Featuring a clear lens with internal amber LEDs, 3M tape and serrated plug fitting, low-profile compact design, IP67 rating, and 9–32V multivolt operation. Left or right-hand mountable LEDs must face the rear of the vehicle. ECE approved for Cat 6 side direction indicator use. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: Cat 6 side direction indicator Lens: Clear with internal amber LEDs Dimensions: 77mm x 52mm x 22mm Fitting system: 3M tape + serrated plug (10mm hole) LED orientation: Faces rear of vehicle Mount: Left or right-hand mountable IP rating: IP67 Input voltage: 9–32V DC (multivolt) Compliance: ECE Category 6 approved Warranty: 5 years Pack quantity: Single blister pack Brand: LED Autolamps SKU: 77ACM Features & Benefits Single blister pack: One lamp per pack for replacement, repair, or single-side installation Cat 6 approval: ECE Category 6 side direction indicator compliance required for GVM upgrade applications Clear lens with amber LEDs: Clean lens appearance with internal amber LEDs Left or right-hand mountable: Single lamp installs on either side non-handed 3M tape and serrated plug: Fast, tool-minimal installation drill 10mm hole, plug and tape 9–32V broad voltage range: Wide multivolt coverage for all 12V and 24V systems IP67 waterproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 77ACM Brand LED Autolamps Series 77 Series Function Cat 6 Side Direction Indicator Lens Clear internal amber LEDs Dimensions 77mm x 52mm x 22mm Fitting System 3M tape + serrated plug (10mm hole) LED Orientation Faces rear of vehicle Mount Left or right-hand mountable IP Rating IP67 Input Voltage 9–32V DC (multivolt) Compliance ECE Category 6 Warranty 5 Years Pack Quantity Single blister pack Compatible With Suits all 12V and 24V vehicles requiring Cat 6 side direction indicators: GVM upgrade applications where a single replacement lamp is needed Any vehicle requiring an individual Cat 6 side indicator Frequently Asked Questions Is this a single lamp or a twin pack? The 77ACM is a single blister pack one lamp. For a left and right pair, refer to the 77ACM2 twin blister pack. What is the difference between the 77ACM and the 77ACM2? The 77ACM is a single blister pack while the 77ACM2 is a twin blister pack containing both a left-hand and right-hand lamp. All other specifications are identical. Is this lamp Cat 6 ECE approved? Yes ECE Category 6 side direction indicator approved. Which direction do the LEDs face? LEDs must face the rear of the vehicle confirm orientation before drilling the 10mm mounting hole. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Round Interior Lamp Chrome Bezel, 15 LEDs, 250lm, 6500K Cool White, 9mm Low Profile, Poly Bag. Product Overview The LED Autolamps 7515CB is a 12V round interior lamp from the 7515 Series the chrome bezel poly bag version. Sharing all specifications with the 7515WB (white bezel, previously listed), the 7515CB differs only in bezel colour offering a chrome finish for interior applications where a more premium or traditional metallic appearance is preferred. Featuring 15 high-brightness LEDs, 250 effective lumens, 6500K cool white output, ultra-slim 9mm depth, ø76mm diameter, 0.27A current draw at 13.8V, and a 20cm fly-lead. Remove bezel and surface mount using three screw points, run wires through hole in mounting surface, refit bezel by clicking into place. Backed by LED Autolamps' 3-year warranty. Supplied in poly bag packaging. Key Specifications LED count: 15 Lumen output: 250lm effective (230lm raw / 180lm effective) Colour temperature: 6500K cool white Bezel colour: Chrome Diameter: ø76mm Depth: 9mm Cable: 20cm Mount type: Surface mount 3-screw fix, click-back bezel Current draw: 0.27A @ 13.8V Housing: ABS Lens: Polypropylene Input voltage: 12V only Compliance: CE, ECE R10 Warranty: 3 years Packaging: Poly bag (bulk) Brand: LED Autolamps SKU: 7515CB Features & Benefits Chrome bezel: Premium chrome finish for a classic, polished interior appearance white bezel alternative is the 7515WB Ultra-slim 9mm depth: One of the slimmest round interior dome lights available ideal for low-ceiling applications in caravans, motorhomes, trucks, and boats 15 high-brightness LEDs: 15 LEDs delivering 250 effective lumens for bright interior illumination 6500K cool white: Crisp daylight-style output for clear, well-lit interior spaces Click-back bezel: Remove bezel, surface mount with three screws, refit by clicking into place clean concealed-fastener installation 20cm cable: Short fly-lead for connection to switched power supply Poly bag supply: Bulk poly bag packaging for trade and workshop supply 0.27A current draw: Low current draw for efficient interior lighting 3-year warranty: Backed by LED Autolamps' 3-year warranty Technical Specs Specification Detail SKU 7515CB Brand LED Autolamps Series 7515 Series LED Count 15 Effective Lumens 250lm (230lm raw / 180lm effective) Colour Temperature 6500K Cool White Bezel Colour Chrome Diameter ø76mm Depth 9mm Cable Length 20cm Current Draw 0.27A @ 13.8V Housing ABS Lens Polypropylene Mount Type Surface mount 3-screw, click-back bezel Input Voltage 12V only Compliance CE, ECE R10 Warranty 3 Years Packaging Poly bag (bulk) Compatible With Suits all 12V interior applications requiring a slim round dome light: Caravans and motorhomes Truck cabs and commercial vehicle interiors Marine and boat cabins Camper trailers and campervans Frequently Asked Questions What is the difference between the 7515CB and the 7515WB? Both are the same 7515 Series interior lamp in poly bag packaging. The 7515CB has a chrome bezel while the 7515WB has a white bezel. Choose based on your preferred interior aesthetic. What is the difference between the 7515CB and the 7515C? Both are chrome bezel versions of the same lamp. The 7515CB is in a poly bag while the 7515C is in a single retail blister pack. Is this lamp cool white or warm white? The 7515CB is cool white (6500K). The warm white variant is a separate SKU confirm with your retailer if warm white is required. Does this lamp include a switch? No a switched circuit must be provided separately. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Round Interior Lamp Chrome Bezel, 15 LEDs, 250lm, 6500K Cool White, 9mm Low Profile, Single Blister. Product Overview The LED Autolamps 7515C is a 12V round interior lamp from the 7515 Series the chrome bezel single retail blister pack version. The 7515C is a LED round interior lamp with chrome bezel, 76mm round x 9mm, 12V only, cool white 6500K, 250 lumens, screw surface mount, 3-year warranty, sold and packaged individually in a blister retail pack. The 7515C features 15 high-brightness LEDs, 250 effective lumens, 6500K cool white, ø76mm face diameter, 9mm profile height, chrome bezel, 12V only, 3-year warranty, and comes in retail blister packaging. Current draw is 0.27A at 13.8V. The blister pack dimensions (131mm x 30mm x 8mm) stated in the supplier features refer to the packaging, not the lamp. The lamp measures ø76mm x 9mm. Key Specifications LED count: 15 Lumen output: 250lm effective (230lm raw / 180lm effective) Colour temperature: 6500K cool white Bezel colour: Chrome Lamp diameter: ø76mm Lamp depth: 9mm Blister pack dimensions: 131mm x 30mm x 8mm Cable: 20cm Mount type: Surface mount 3-screw fix, click-back bezel Current draw: 0.27A @ 13.8V Housing: ABS Lens: Polypropylene Input voltage: 12V only Compliance: CE, ECE R10 Warranty: 3 years Packaging: Single blister pack Brand: LED Autolamps SKU: 7515C Features & Benefits Chrome bezel: Premium chrome finish for a classic, polished interior appearance; white bezel single blister is the 7515W Single retail blister pack: Individual retail packaging the bulk poly bag version is the 7515CB Ultra-slim 9mm depth: ø76mm x 9mm one of the slimmest round interior dome lights available 15 high-brightness LEDs: 250 effective lumens for bright interior illumination 6500K cool white: Crisp daylight-style output for clear, well-lit interior spaces Click-back bezel: Remove bezel, surface mount with three screws, refit by clicking into place 0.27A current draw: Low electrical load for efficient interior lighting 3-year warranty: Backed by LED Autolamps' 3-year warranty Technical Specs Specification Detail SKU 7515C Brand LED Autolamps Series 7515 Series LED Count 15 Effective Lumens 250lm (230lm raw / 180lm effective) Colour Temperature 6500K Cool White Bezel Colour Chrome Lamp Diameter ø76mm Lamp Depth 9mm Blister Pack Dimensions 131mm x 30mm x 8mm Cable Length 20cm Current Draw 0.27A @ 13.8V Housing ABS Lens Polypropylene Mount Type Surface mount 3-screw, click-back bezel Input Voltage 12V only Compliance CE, ECE R10 Warranty 3 Years Packaging Single blister pack Compatible With Suits all 12V interior applications: Caravans and motorhomes Truck cabs and commercial vehicle interiors Marine and boat cabins Camper trailers and campervans Frequently Asked Questions What do the dimensions 131mm x 30mm x 8mm refer to? Those are the blister packaging dimensions, not the lamp dimensions. The lamp itself measures ø76mm face diameter x 9mm profile height.  What is the difference between the 7515C and the 7515CB? Both are the same chrome bezel 7515 Series interior lamp. The 7515C comes in a retail blister pack while the 7515CB is in a bulk poly bag. What is the current draw? 0.27A at 13.8V confirmed from AE.Parts 7515C listing. Is this cool white or warm white? The 7515C is cool white (6500K). The warm white variant is the 7515C-WW. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less