Roadvision BR201AR LED Rectangle Combination Lamp Stop Tail and Indicator An ADR-approved compact LED rectangle combination lamp from the Roadvision BR201 Series, the BR201AR features stop, tail, and indicator functions with 12 LEDs per function, polycarbonate lens and housing, 10-30V DC multi-volt input, 160mm mounting hole centre, and a 300mm tinned copper pre-wired cable with LEDLink connector, backed by a 5-year warranty. Product Overview The Roadvision BR201AR is a compact LED rectangle combination lamp from the BR201 Series, providing stop, tail, and indicator functions in a single 204 x 40 x 28mm surface mount unit. Twelve LEDs per function deliver bright stop, tail, and indicator output, with each function producing more light output than equivalent incandescent lamps while drawing a fraction of the current. Current draw is 0.2A for indicator and 0.2A/0.05A for stop/tail at 13.8V. The polycarbonate lens and housing are waterproof and maintenance-free with a 100,000 hour rated LED lifespan. The 160mm mounting hole centre allows straightforward surface mount installation. Pre-wired with a 300mm tinned copper sheathed cable and LEDLink connector with earth (white), stop (red), tail (brown), and indicator (green or yellow) wires. ADR approved with individual CRN numbers for indicator (CRN 50440), stop (CRN 50441), and tail (CRN 50442) functions. CTA approval CTA-061016. Backed by a 5-year warranty. Features & Benefits Compact All-in-One Stop, Tail, and Indicator Combination Lamp: The BR201AR combines stop, tail, and indicator functions in a single compact 204 x 40 x 28mm rectangle unit, reducing the number of individual lamp assemblies required for trailer and vehicle rear lighting. ADR Approved for All Functions: The BR201AR holds individual ADR approval CRN numbers for indicator (CRN 50440), stop (CRN 50441), and tail (CRN 50442) functions, and CTA approval CTA-061016, confirming compliance with Australian road safety requirements for all lamp functions. 12 LEDs Per Function - Brighter than Incandescent: Twelve LEDs per stop, tail, and indicator function produce more light output than equivalent incandescent lamps while drawing significantly less current, improving safety and visibility. Polycarbonate Lens and Housing - Weatherproof: Both the lens and housing are manufactured from polycarbonate, providing durability, impact resistance, and weatherproof protection suited to all trailer and vehicle exterior applications. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan with maintenance-free solid-state technology eliminates bulb replacements over the service life of the lamp. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. LEDLink Connector for Simple Wiring: The 300mm tinned copper sheathed cable with LEDLink connector provides a reliable, corrosion-resistant pre-wired connection for straightforward installation into trailer wiring systems using compatible LEDLink connectors. Surface Mount Design with 160mm Mounting Hole Centre: The compact surface mount design with a single 160mm mounting hole centre provides straightforward installation to trailer and vehicle rear panels. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR201AR Brand Roadvision Series BR201 Description Rectangle Combination - Stop/Tail and Indicator Functions Stop, Tail, Indicator LED Quantity - Indicator 12 LEDs LED Quantity - Stop/Tail 12 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.2A at 13.8V Current Draw - Stop 0.2A at 13.8V Current Draw - Tail 0.05A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 204mm x 40mm x 28mm Mounting Hole Centre 160mm Cable Length 300mm Tinned Copper Sheathed Connector LEDLink Wiring Earth - White, Stop - Red, Tail - Brown, Indicator - Green or Yellow ADR Approval - Indicator CRN 50440 ADR Approval - Stop CRN 50441 ADR Approval - Tail CRN 50442 CTA Approval CTA-061016 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR201AR is compatible with 10-30V DC trailer and vehicle electrical systems. The LEDLink connector is compatible with standard LEDLink trailer wiring systems. ADR and CTA approved for on-road use. Confirm mounting dimensions and wiring compatibility for your specific trailer or vehicle before purchase. Frequently Asked Questions Is the BR201AR ADR approved for on-road use? Yes. The BR201AR holds individual ADR approval CRN numbers for indicator (CRN 50440), stop (CRN 50441), and tail (CRN 50442) functions, and CTA approval CTA-061016, confirming compliance with Australian road safety requirements. What is a LEDLink connector? LEDLink is a waterproof connector system used in trailer lighting applications. The BR201AR is pre-wired with a LEDLink connector for direct plug-in connection to compatible LEDLink trailer wiring systems. Is the BR201AR compatible with 24V systems? Yes. The BR201AR operates across 10-30V DC, compatible with both 12V and 24V vehicle and trailer electrical systems. What is the LED lifespan of the BR201AR? The BR201AR has a rated LED lifespan of 100,000 hours with maintenance-free solid-state technology. Does the BR201AR include a reverse function? No. The BR201AR provides stop, tail, and indicator functions only. Confirm whether a reverse function is required for your specific application before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR601ARR LED Jumbo Combination Lamp Twin Stop Tail Ind A triple module LED jumbo combination lamp from the Roadvision BR601 Series, the BR601ARR combines twin stop/tail modules and an indicator with an integrated reflector, 10-30V DC multi-volt input, sealed polycarbonate lenses on a high impact ABS housing, a 100,000 hour rated LED lifespan, ADR/ECE approval for all functions, and a 5-year warranty. Product Overview The Roadvision BR601ARR is a heavy duty all-in-one rear lighting solution for trucks and trailers, running double stop/tail modules alongside the indicator in a single 604 x 132 x 41mm jumbo lamp for extra rear-facing presence. With 48 stop/tail LEDs and 24 indicator LEDs, it produces more light output than incandescent lamps while drawing a fraction of the current, at just 0.1A for the indicator and 0.1/0.05A for stop/tail at 13.8V. The unbreakable sealed polycarbonate lenses and extremely tough high impact ABS housing are dust and water proof and totally maintenance free, with a 100,000 hour rated LED lifespan from solid-state technology. The simple surface mount design retro-fits in place of existing jumbo lamps on 501mm and 325mm mounting hole centres, and the lamp is supplied pre-wired with a 300mm LEDLink connector. All functions are ADR/ECE approved. With Roadvision it's fit and forget. Features & Benefits Twin Stop/Tail Modules for Extra Visibility: The BR601ARR runs two stop/tail modules with 48 LEDs in total alongside the indicator module, boosting rear-facing brake and tail presence on heavy vehicles. All-In-One Heavy Duty Combination Lamp: Stop/tail, indicator, and reflector functions are combined in one triple module jumbo lamp, replacing multiple separate lamps on the rear of trucks and trailers. Retro-Fits Existing Jumbo Lamps: The simple surface mount design retro-fits in place of existing jumbo combination lamps, making it a straightforward LED upgrade for heavy vehicles. More Light, Less Current: The BR601 Series produces more light output than conventional incandescent systems while drawing a fraction of the current at 13.8V. 100,000 Hour Rated LED Lifespan: Solid-state LED technology delivers a 100,000 hour rated lifespan for totally maintenance-free operation over the life of the vehicle. Unbreakable Polycarbonate Lenses and High Impact ABS Housing: The sealed polycarbonate lenses and extremely tough high impact ABS housing are dust and water proof, built for heavy duty road exposure. Multi-Volt 10-30V DC Input: The 10-30V DC multi-volt input makes the BR601ARR compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. ADR/ECE Approved for All Functions: The indicator, stop, and tail functions are all ADR/ECE approved for legal on-road use in Australia. Pre-Wired with LEDLink Connector: The lamp is supplied pre-wired with a 300mm LEDLink connector for a quick, tidy connection to the vehicle harness. 5-Year Warranty: The BR601ARR is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR601ARR Brand Roadvision Series BR601 Combination Description Rect Stop/Tail(x2)/Ind Lamp Triple Module Functions Stop/Tail (x2), Indicator and Reflector Voltage Input 10-30V DC Number of LEDs Indicator - 24 LEDs, Stop/Tail - 48 LEDs Current Draw Indicator - 0.1A, Stop/Tail - 0.1/0.05A at 13.8V Dimensions 604 x 132 x 41mm Lens Polycarbonate Housing ABS High Impact Ingress Protection Water and Dust Proof Mounting Type Surface Mount Mounting Hole Centres 501mm and 325mm Cable 300mm with LEDLink Connector ADR Approval Indicator - CRN 46082, Stop - CRN 46121, Tail - CRN 46120 CTA Approval CTA-060775 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR601ARR is compatible with 10-30V DC electrical systems, covering both 12V and 24V trucks and trailers, and is ADR/ECE approved for all functions for on-road use in Australia. The surface mount design retro-fits in place of existing jumbo lamps. The BR601 Series is also available as a twin module stop/tail/indicator (BR601AR) and a triple module with reverse (BR601ARW). Confirm the 604mm lamp length and 501mm/325mm mounting hole centres fit your intended location before purchase. Frequently Asked Questions What functions does the BR601ARR include? The BR601ARR combines twin stop/tail modules with 48 LEDs, a 24 LED indicator module, and an integrated reflector in a single triple module jumbo lamp. Why does the BR601ARR have two stop/tail modules? The double stop/tail configuration doubles the brake and tail LED count to 48 for extra rear-facing visibility on heavy vehicles, in place of the reverse module found on the BR601ARW. Is the BR601ARR ADR approved? Yes. All functions are ADR/ECE approved, with indicator CRN 46082, stop CRN 46121, tail CRN 46120, and CTA approval CTA-060775. Is the BR601ARR compatible with 24V trucks? Yes. The BR601ARR operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Can the BR601ARR replace my existing jumbo lamp? Yes. The simple surface mount design retro-fits in place of existing jumbo combination lamps, with 501mm and 325mm mounting hole centres. Confirm your existing mounting positions before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR82ARW LED Triple Combination Lamp Stop Tail Indicator and Reverse An ADR-approved compact LED triple combination lamp from the Roadvision BR82 Series, the BR82ARW features stop, tail, indicator, and reverse functions with polycarbonate lens, high-impact ABS housing, 10-30V DC multi-volt input, 120mm stud centre mounting, and a 300mm tinned copper pre-wired cable with LEDLink connector, backed by a 5-year warranty. Product Overview The Roadvision BR82ARW is a compact LED triple combination lamp from the BR82 Series, providing stop, tail, indicator, and reverse functions in a single 282 x 95 x 30mm surface mount unit. Twelve indicator LEDs, 12 stop/tail LEDs, and 12 reverse LEDs deliver more light output than equivalent incandescent lamps while drawing a fraction of the current. Current draw at 13.8V is 0.1A for indicator, 0.1A/0.05A for stop/tail, and 0.1A for reverse. High-impact ABS housing with sealed polycarbonate lens. 120mm stud centre mounting. Pre-wired with a 300mm tinned copper sheathed cable with LEDLink connector with earth (white), stop (red), tail (brown), indicator (green or yellow), and reverse (black) wires. ADR approved with individual CRN numbers for indicator (CRN 49821), stop (CRN 49823), tail (CRN 49824), and reverse (CRN 49822) functions. CTA approval CTA-060786. Backed by a 5-year warranty. Features & Benefits Compact All-in-One Stop, Tail, Indicator, and Reverse Combination Lamp: The BR82ARW combines stop, tail, indicator, and reverse functions in a single compact 282 x 95 x 30mm rectangle unit, providing a complete rear combination lamp solution including reverse in a single assembly. ADR Approved for All Functions: Individual ADR approval CRN numbers for indicator (CRN 49821), stop (CRN 49823), tail (CRN 49824), and reverse (CRN 49822) functions, and CTA approval CTA-060786, confirming compliance with Australian road safety requirements for all lamp functions. 12 LEDs Per Function - Indicator, Stop/Tail, and Reverse: Dedicated 12 LED arrays per function produce more light output than equivalent incandescent lamps while drawing significantly less current. High-Impact ABS Housing with Sealed Polycarbonate Lens: Durable high-impact ABS housing with weatherproof sealed polycarbonate lens for long-term reliability. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan eliminates bulb replacements. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. LEDLink Connector for Simple Wiring: The 300mm tinned copper sheathed cable with LEDLink connector provides reliable pre-wired connection to LEDLink trailer wiring systems. 120mm Stud Centre Surface Mount: Surface mount design with 120mm stud centres for straightforward installation. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR82ARW Brand Roadvision Series BR82 Description Rectangle Triple Combination - Stop/Tail, Indicator and Reverse Functions Stop, Tail, Indicator, Reverse LED Quantity - Indicator 12 LEDs LED Quantity - Stop/Tail 12 LEDs LED Quantity - Reverse 12 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.1A at 13.8V Current Draw - Stop 0.1A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.1A at 13.8V Lens Construction Polycarbonate Housing Construction High-Impact ABS Dimensions 282mm x 95mm x 30mm Mounting Hole Centre 120mm Stud Centres Cable Length 300mm Tinned Copper Sheathed Connector LEDLink Wiring Earth - White, Stop - Red, Tail - Brown, Indicator - Green or Yellow, Reverse - Black ADR Approval - Indicator CRN 49821 ADR Approval - Stop CRN 49823 ADR Approval - Tail CRN 49824 ADR Approval - Reverse CRN 49822 CTA Approval CTA-060786 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR82ARW is compatible with 10-30V DC trailer and vehicle electrical systems. The LEDLink connector is compatible with standard LEDLink trailer wiring systems. ADR and CTA approved for on-road use including reverse. Confirm mounting dimensions and wiring compatibility for your specific application before purchase. A stop/tail/indicator version without reverse is available as the BR82ARR. Frequently Asked Questions Is the BR82ARW ADR approved for on-road use? Yes. The BR82ARW holds individual ADR approval CRN numbers for indicator (CRN 49821), stop (CRN 49823), tail (CRN 49824), and reverse (CRN 49822) functions, and CTA approval CTA-060786. What is the difference between the BR82ARW and the BR82ARR? The BR82ARW adds a reverse function with 12 dedicated reverse LEDs and a black reverse wire to the stop, tail, and indicator functions of the BR82ARR. Both share the same dimensions, housing, connector, and multi-volt input. Choose the BR82ARW where an integrated reverse lamp is required. Is the BR82ARW compatible with 24V systems? Yes. The BR82ARW operates across 10-30V DC, compatible with both 12V and 24V systems. What wires are included on the BR82ARW? Earth (white), stop (red), tail (brown), indicator (green or yellow), and reverse (black) wires on a 300mm tinned copper sheathed LEDLink cable. What is the LED lifespan of the BR82ARW? 100,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR80ARW LED Rectangle Triple Module Lamp Stop Tail Indicator Reverse and Reflector An ADR-approved LED rectangle triple module combination lamp from the Roadvision BR80 Series, the BR80ARW features stop, tail, indicator, reverse, and integrated reflector functions with polycarbonate lens and housing, IP67 protection, 10-30V DC multi-volt input, 241mm mounting hole centre, and a 300mm LEDLink connector pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR80ARW is a rectangle triple module combination lamp from the BR80 Series, providing stop, tail, indicator, reverse, and integrated reflector functions in a single 288 x 107 x 29mm surface mount unit. Sixteen indicator LEDs, 16 stop/tail LEDs, and 16 reverse LEDs deliver high-output performance with low current draw. Current draw at 13.8V is 0.2A for indicator, 0.2A/0.05A for stop/tail, and 0.3A for reverse. Polycarbonate lens and housing are IP67 waterproof and dustproof with a 100,000 hour rated LED lifespan. Integrated reflector in the housing. 241mm mounting hole centre surface mount. Pre-wired with a 300mm LEDLink connector cable. ADR approved with individual CRN numbers for indicator (CRN 46114), stop (CRN 46112), tail (CRN 46113), reverse (CRN 46115), and reflector (CRN 46075) functions. Backed by a 5-year warranty. Features & Benefits Stop, Tail, Indicator, Reverse, and Integrated Reflector Functions: The BR80ARW combines all five functions in a single compact triple module unit, providing a complete rear combination lamp solution including reverse. ADR Approved for All Functions: Individual ADR approval CRN numbers for indicator (CRN 46114), stop (CRN 46112), tail (CRN 46113), reverse (CRN 46115), and reflector (CRN 46075), confirming compliance with Australian road safety requirements for all lamp functions. 16 LEDs Per Function - Indicator, Stop/Tail, and Reverse: High LED counts per function deliver superior brightness compared to equivalent incandescent lamps with significantly lower current draw. Integrated Retro Reflector: The retro reflector is integrated into the housing, providing passive rear visibility without requiring a separate reflector assembly. Polycarbonate Lens and Housing - IP67 Rated: Sealed polycarbonate construction on both lens and housing provides IP67 waterproof and dustproof protection for all exterior trailer and vehicle mounting locations. 100,000 Hour LED Lifespan - Fit and Forget: Maintenance-free solid-state technology with a 100,000 hour rated lifespan eliminates bulb replacements. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. LEDLink Connector Pre-Wired Cable: The 300mm LEDLink connector cable provides reliable, corrosion-resistant pre-wired connection to LEDLink trailer wiring systems. 241mm Mounting Hole Centre Surface Mount: Simple surface mount installation for horizontal or vertical mounting surfaces. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR80ARW Brand Roadvision Series BR80 Description Rect Stop/Tail/Ind/Rev/Ref Lamp Triple Module Functions Stop, Tail, Indicator, Reverse, Reflector LED Quantity - Indicator 16 LEDs LED Quantity - Stop/Tail 16 LEDs LED Quantity - Reverse 16 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.2A at 13.8V Current Draw - Stop 0.2A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.3A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 288mm x 107mm x 29mm Mounting Type Surface Mount Mounting Hole Centre 241mm Cable Length 300mm LEDLink Connector IP Rating IP67 ADR Approval - Indicator CRN 46114 ADR Approval - Stop CRN 46112 ADR Approval - Tail CRN 46113 ADR Approval - Reverse CRN 46115 ADR Approval - Reflector CRN 46075 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR80ARW is compatible with 10-30V DC trailer and vehicle electrical systems. The LEDLink connector is compatible with standard LEDLink trailer wiring systems. ADR approved for all functions including reverse. Confirm mounting dimensions and wiring compatibility for your specific application before purchase. A stop/tail/indicator/reflector version without reverse is available as the BR80ARR. Frequently Asked Questions Is the BR80ARW ADR approved for on-road use? Yes. The BR80ARW holds individual ADR approval CRN numbers for indicator (CRN 46114), stop (CRN 46112), tail (CRN 46113), reverse (CRN 46115), and reflector (CRN 46075) functions. What is the difference between the BR80ARW and the BR80ARR? The BR80ARW adds a reverse function with 16 dedicated reverse LEDs to the stop, tail, indicator, and reflector functions of the BR80ARR. Both share the same dimensions, polycarbonate housing, IP67 rating, and LEDLink connector. Choose the BR80ARW where an integrated reverse lamp is required. Is the BR80ARW compatible with 24V systems? Yes. The BR80ARW operates across 10-30V DC, compatible with both 12V and 24V systems. What wires does the BR80ARW include? The wiring colour codes are not specified in the source data. Confirm wiring colour codes with your supplier before purchase. What is the LED lifespan of the BR80ARW? 100,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR280ARW LED Combination Lamp Stop Tail Sequential Indicator Reverse Fog and Reflector An ADR-approved LED rectangle combination lamp from the Roadvision BR280 Series, the BR280ARW features stop, tail, sequential indicator, reverse, fog, and integrated reflector functions with polycarbonate lens and housing, 10-30V DC multi-volt input, surface or twin bolt mount, and a 500mm sheathed pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR280ARW is a rear combination lamp from the BR280 Series, providing the most complete rear lamp function set in the BR280 range: stop, tail, sequential indicator, reverse, fog, and integrated retro reflector in a single 283 x 100 x 29mm surface mount unit. The progressive sequential indicator flashes in a sweeping sequence for enhanced visibility and road safety. Polycarbonate lens and housing are IP67 waterproof and dustproof with a 100,000 hour rated LED lifespan. LED count covers indicator (24 LEDs), stop/tail (14 LEDs), reverse (12 LEDs), and fog (14 LEDs) functions. Current draw at 13.8V is 0.2A for indicator, 0.2A/0.05A for stop/tail, 0.2A for reverse, and 0.3A for fog. Surface mount with 116mm mounting hole centre, or twin rear stud mount for horizontal and vertical mounting surfaces. Pre-wired with a 500mm sheathed cable. ADR and ECE approved with individual approval numbers for each function. CTA approval CTA-060819. Backed by a 5-year warranty. Features & Benefits Sequential Indicator for Enhanced Safety: The progressive sequential indicator flashes in a sweeping sequence rather than a standard simultaneous flash, providing increased visibility and a modern, distinctive appearance that enhances road safety. Complete 5-Function Combination Lamp: The BR280ARW combines stop, tail, sequential indicator, reverse, fog, and integrated reflector functions in a single compact unit, providing a complete rear lamp solution without requiring multiple separate lamp assemblies. ADR and ECE Approved for All Functions: Individual ECE approval numbers for indicator (2a-E9-01 16532), stop/tail (R1-S1-E9-02 16532), reverse (AR-E9-00 16532), fog (F1-E9-00 16532), and reflector (IB-E9-02 16532), plus CTA approval CTA-060819, confirming compliance with Australian and international road safety requirements for all lamp functions. Integrated Retro Reflector: The retro reflector is integrated directly into the lens, providing passive rear visibility without requiring a separate reflector unit. Polycarbonate Lens and Housing - IP67 Rated: Sealed polycarbonate construction on both lens and housing provides IP67 waterproof and dustproof protection for all exterior trailer and vehicle mounting locations. Multi-Fit Surface or Twin Bolt Mount: The BR280ARW can be installed via simple surface mount with a 116mm mounting hole centre, or via twin rear stud bolt mount for horizontal or vertical mounting surfaces, providing flexibility for different trailer and vehicle rear panel configurations. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan with maintenance-free solid-state technology provides long-term reliability with no bulb replacements required. 500mm Sheathed Pre-Wired Cable: The 500mm sheathed pre-wired cable provides a protected and reliable connection to the trailer or vehicle wiring harness. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR280ARW Brand Roadvision Series BR280 Description Rectangle Stop/Tail/Ref Sequential Indicator Combination Functions Stop, Tail, Sequential Indicator, Reverse, Fog, Reflector LED Quantity - Indicator 24 LEDs LED Quantity - Stop/Tail 14 LEDs LED Quantity - Reverse 12 LEDs LED Quantity - Fog 14 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.2A at 13.8V Current Draw - Stop 0.2A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.2A at 13.8V Current Draw - Fog 0.3A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 283mm x 100mm x 29mm Mounting Type Surface Mount or Twin Bolt Mount Mounting Hole Centre 116mm Cable Length 500mm Sheathed IP Rating IP67 ECE Indicator Approval 2a-E9-01 16532 ECE Stop/Tail Approval R1-S1-E9-02 16532 ECE Reverse Approval AR-E9-00 16532 ECE Fog Approval F1-E9-00 16532 ECE Reflector Approval IB-E9-02 16532 CTA Approval CTA-060819 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR280ARW is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and ECE approved for all functions. Mounts via surface mount (116mm mounting hole centre) or twin rear stud bolt mount for horizontal or vertical mounting surfaces. Confirm wiring requirements for all five active functions before purchase. Frequently Asked Questions Is the BR280ARW ADR approved for on-road use? Yes. The BR280ARW holds individual ECE approval numbers for indicator, stop/tail, reverse, fog, and reflector functions, and CTA approval CTA-060819, confirming compliance with Australian and international road safety requirements. What is a sequential indicator and why is it beneficial? A sequential indicator activates its LEDs in a progressive sweeping sequence rather than all simultaneously. This provides a more visible and distinctive indicator signal that is easier for other road users to notice, improving rear visibility and road safety. How can the BR280ARW be mounted? The BR280ARW can be surface mounted using the 116mm mounting hole centre, or bolt mounted using the twin rear studs for horizontal or vertical mounting surfaces, providing flexibility for different trailer and vehicle rear panel configurations. Is the BR280ARW compatible with 24V systems? Yes. The BR280ARW operates across 10-30V DC, compatible with both 12V and 24V vehicle and trailer electrical systems. How many functions does the BR280ARW provide? The BR280ARW provides six functions: stop, tail, sequential indicator, reverse, fog, and integrated retro reflector, making it one of the most complete single rear combination lamp units in the BR280 Series.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR207LR LED Combination Lamp Twin Pack Stop Tail Indicator and Reflector An ADR-approved 12V LED rectangle combination lamp twin pack from the Roadvision BR207 Series, the BR207LR features stop, tail, indicator, and integrated reflector functions with polycarbonate lens and housing, 100mm mounting hole centre, and a 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR207LR is a compact LED combination lamp from the BR207 Series supplied as a twin pack, designed as a simple DIY trailer lighting solution for budget-conscious consumers. Six indicator LEDs and 6 stop/tail LEDs per lamp deliver more light output than equivalent incandescent lamps while drawing a fraction of the current at 12V DC. The polycarbonate lens and housing is waterproof, dustproof, and submersible with a 100,000 hour rated LED lifespan. The integrated reflector is built into the housing. Easy twin stud surface mount installation with stainless steel hardware. Pre-wired with a 300mm tinned copper cable with earth (white), stop (red), rail (brown), and indicator (green or yellow) wires. ADR and ECE approved for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611) functions. CTA approval CTA-060546. Backed by a 5-year warranty. Features & Benefits Twin Pack for Complete Trailer Rear Lamp Installation: The BR207LR is supplied as a twin pack, providing both left and right lamps for a complete trailer rear lamp installation in a single purchase. Stop, Tail, Indicator, and Integrated Reflector Functions: Combines stop, tail, indicator, and integrated reflector functions in a single compact unit. ADR and ECE Approved for All Functions: ECE approval numbers for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611), and CTA approval CTA-060546, confirming compliance with Australian road safety requirements. 6 LEDs Per Function - Indicator and Stop/Tail: Six LEDs per function produce more light output than equivalent incandescent lamps with minimal current draw. Polycarbonate Lens and Housing - Waterproof Submersible: Sealed polycarbonate construction provides full waterproof, dustproof, and submersible protection for boat trailer and all-weather applications. 100,000 Hour LED Lifespan - Fit and Forget: Maintenance-free solid-state technology eliminates bulb replacements. 12V DC Input: Compatible with standard 12V trailer and vehicle electrical systems. Easy Twin Stud Surface Mount with Stainless Steel Hardware: Integrated twin mounting studs with stainless steel hardware provide simple, secure, corrosion-resistant installation. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white), stop (red), rail (brown), and indicator (green or yellow) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR207LR Brand Roadvision Series BR207 Description Rect Stop/Tail/Ind/Ref Twin Pack Functions Stop, Tail, Indicator, Reflector LED Quantity - Indicator 6 LEDs LED Quantity - Stop/Tail 6 LEDs Input Voltage 12V DC Current Draw - Indicator 0.09A at 13.8V Current Draw - Stop 0.09A at 13.8V Current Draw - Tail 0.02A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 150mm x 80mm x 23mm Mounting Hole Centre 100mm Mount Twin Stud Surface Mount with Stainless Steel Hardware Cable Length 300mm Tinned Copper Wiring Earth - White, Stop - Red, Rail - Brown, Indicator - Green or Yellow Pack Quantity 2 Lamps ECE Indicator Approval E4-6R-0115611 ECE Stop/Tail Approval E4-7R-0215611 ECE Reflector Approval E4-3R-0215611 CTA Approval CTA-060546 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR207LR is compatible with 12V DC trailer and vehicle electrical systems. ADR and ECE approved for on-road use. Confirm mounting and wiring requirements before purchase. A version with licence plate lamp is available as the BR207LRNP. Multi-volt versions are available as the BR207MV and BR207NPMV. Frequently Asked Questions Is the BR207LR ADR approved for on-road use? Yes. The BR207LR holds ECE approval numbers for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611) functions, and CTA approval CTA-060546. Is the BR207LR waterproof for boat trailer use? Yes. The sealed polycarbonate lens and housing provide waterproof and submersible protection, making the BR207LR suitable for boat trailer applications. How many lamps are in the BR207LR pack? The BR207LR is a twin pack containing two lamps for a complete left and right trailer rear lamp installation. What is the difference between the BR207LR and the BR207LRNP? Both are 12V twin packs with the same lamp specifications. The BR207LRNP adds an integrated licence plate lamp with 4 LEDs and includes a kit with additional components. The BR207LR does not include a licence plate lamp. Is the BR207LR compatible with 24V systems? No. The BR207LR is a 12V DC unit only. For multi-volt 10-30V DC compatibility, refer to the BR207MV or BR207NPMV.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Interior LED Light 61 SMD LEDs, 30W Equivalent, 120° Spread, 300mm Product Overview The LED Autolamps 1061/24 is a 24V slimline interior LED light bar measuring 300mm x 25mm x 10mm, fitted with 61 SMD LEDs and equivalent in output to a 30W incandescent globe. Delivering a 120° spread for broad, even illumination, it's designed for truck cab interiors, sleeper berths, and commercial vehicle cabins running 24V electrical systems. The low-profile 10mm depth sits neatly on ceilings and panels without adding bulk. Backed by a 3-year warranty. Features & Benefits 61 SMD LEDs — high LED count across a 300mm bar delivers even, consistent interior illumination 30W equivalent output — matches the brightness of a standard 30W incandescent globe with significantly lower power consumption 120° spread — wide beam angle delivers broad, even illumination across the interior space without hotspots Low-profile slimline design — 300mm x 25mm x 10mm form factor mounts flush to ceilings and panels without adding bulk 24V only — designed specifically for 24V heavy transport and commercial vehicle electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 1061/24 Lamp Type Interior Light LED Configuration 61 x SMD Equivalent Output 30W incandescent Beam Angle 120° Voltage 24V Dimensions 300mm x 25mm x 10mm Light Style Rectangle Warranty 3 years Weight 0.08 kg Compatible With / Goes Well With 24V truck cabs, sleeper berths, and commercial vehicle interiors Heavy transport and large vehicle electrical systems running 24V LED Autolamps 1031/24 interior lamp (same 24V series, different form factor) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions Is the 1061/24 suitable for 12V systems? No. The 1061/24 is a 24V-only light, designed specifically for heavy transport and commercial vehicles running 24V electrical systems. What does 30W equivalent mean? The 1061/24 produces light output comparable to a 30W incandescent globe while using significantly less power — the LED technology delivers the same visible brightness with lower energy consumption and a longer lifespan. What is the beam angle of the 1061/24? The 1061/24 delivers a 120° spread, providing broad, even illumination across interior spaces without concentrated hotspots. How slim is the 1061/24 profile? At just 10mm deep and 25mm wide, the 1061/24 is an ultra-slim bar lamp that mounts virtually flush to ceilings and panels — suitable for even the tightest interior spaces. What warranty does the 1061/24 carry? The 1061/24 is backed by a 3-year warranty from LED Autolamps. Weight 0.08 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR-Approved LED Combination Lamp Stop, Tail, Indicator & Reflector in Black Chrome. Product Overview The LED Autolamps MAXILAMPC3XR is a four-function LED combination lamp delivering stop, tail, indicator, and reflector functions in a single surface-mount unit with a striking black chrome housing finish. Designed for use on trailers, caravans, trucks, and commercial vehicles operating on both 12V and 24V systems, this lamp is ADR road approved and ECE certified (CTA040962) for legal Australian road use. Measuring 370mm x 135mm x 40mm with a centre-to-centre mounting distance of 269mm, the MAXILAMPC3XR is supplied in blister packaging as a single unit. The IP67 rating ensures full protection against dust ingress and temporary water immersion, while the 7-year warranty reflects LED Autolamps' confidence in the long-term reliability of this product. Suitable for Australian conditions and legal compliance requirements, this is a quality combination lamp solution for any trailer or commercial vehicle build. Key Specifications Functions: Stop, tail, indicator, reflector Voltage: 12V or 24V Housing colour: Black chrome IP rating: IP67 Compliance: ADR approved, ECE approved (CTA040962) Warranty: 7 years Dimensions: 370mm x 135mm x 40mm Centre-to-centre mounting: 269mm Mount type: Surface mount Light type: LED Weight: 1.1kg Packaging: Blister pack (single unit) Brand: LED Autolamps SKU: MAXILAMPC3XR Features & Benefits Four-function combination lamp: Combines stop, tail, indicator, and reflector functions in a single lamp unit, simplifying wiring and reducing the number of separate lamp assemblies required ADR and ECE approved: Fully compliant with Australian Design Rules and ECE certification (CTA040962) for legal road use on Australian roads Black chrome housing: Premium black chrome face finish suits modern trailer and commercial vehicle builds requiring a sleek, professional lamp aesthetic 12V and 24V compatible: Operates on both 12V and 24V systems, making it suitable for passenger vehicle trailers, caravans, and heavy commercial trucks IP67 weatherproof: Fully protected against dust and temporary water immersion, reliable in the demanding outdoor conditions experienced on Australian roads LED technology: Longer lifespan, lower power draw, and faster response time compared to traditional incandescent trailer lamps 7-year warranty: LED Autolamps' industry-leading 7-year warranty reflects the long-term reliability of this product Surface mount design: Straightforward surface mounting with 269mm centre-to-centre bolt spacing for easy fitment Technical Specs Specification Detail SKU MAXILAMPC3XR Brand LED Autolamps Functions Stop, Tail, Indicator, Reflector Light Type LED Voltage 12V or 24V Housing Colour Black Chrome IP Rating IP67 Compliance ADR Approved, ECE CTA040962 Warranty 7 Years Dimensions 370mm x 135mm x 40mm Centre-to-Centre Mounting 269mm Mount Type Surface Mount Weight 1.1kg Packaging Blister Pack single unit Inner Carton Quantity 2 Outer Carton Quantity 8 Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-approved combination lamps including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions Is this lamp ADR approved for Australian road use? Yes the MAXILAMPC3XR is ADR road approved and ECE certified (CTA040962), confirming it meets Australian legal requirements for road use on trailers and commercial vehicles. How many units are supplied in this pack? This blister pack contains a single lamp unit. If you require both left and right side lamps, two units will need to be purchased. What is the centre-to-centre mounting distance? The MAXILAMPC3XR has a centre-to-centre mounting distance of 269mm. Confirm this suits your mounting surface and bolt pattern before purchasing. Is this lamp compatible with both 12V and 24V vehicles? Yes the MAXILAMPC3XR operates on both 12V and 24V systems, making it suitable for passenger vehicle trailers through to heavy commercial trucks. What is covered under the 7-year warranty? The 7-year warranty is provided by LED Autolamps and covers manufacturing defects. Contact your retailer or LED Autolamps directly for warranty claim procedures and terms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 97202 Model 72 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable Equip your truck, trailer, or commercial vehicle with the Narva 97202 Model 72, a fully sealed three-function rear combination lamp featuring an in-built retro reflector, hardened acrylic lens, and a versatile dual bolt pattern footprint — backed by Narva's industry-leading 7-year warranty. Product Overview The Narva 97202 is a Model 72 rear combination lamp designed for truck, trailer, and commercial vehicle applications requiring a reliable three-function rear light. Integrating stop, tail, and direction indicator functions into a single compact unit with an in-built retro reflector, the 97202 delivers clean, ADR-compliant rear lighting without the complexity of additional reverse lamp wiring. The primary mounting footprint of 284 x 100mm suits the common industry standard for truck and trailer lighting locations. Adjustable bolt holes also accommodate the smaller 222 x 96mm footprint for increased installation versatility across a broader range of vehicle and trailer body configurations. Constructed with a hardened acrylic lens for superior UV and chemical resistance, the Model 72 delivers Narva's signature rear tail light appearance at night with a stylish light pipe design. Full IP68 and IP69K waterproof sealing ensures reliable operation under pressure washing, submersion, and extreme weather conditions. The 9-33V operating range covers both 12V and 24V platforms, and the 0.5m cable provides sufficient length for standard installation without extension cables. Backed by a 7-year warranty, the Narva 97202 is built for the long-term demands of commercial transport, agricultural, and construction fleet applications where a dedicated reverse lamp is installed separately or not required. Features & Benefits Three-function combination lamp integrating stop, tail, and direction indicator functions in a single unit for clean, straightforward rear lighting installations In-built retro reflector providing passive rear visibility without requiring a separate reflector installation Hardened acrylic lens with superior UV and chemical resistance preventing yellowing, hazing, and degradation from prolonged exposure Signature Narva tail light appearance delivering stylish light pipe illumination at night for a professional, modern finish 284 x 100mm primary footprint matching the common industry standard for truck and trailer rear light locations Adjustable bolt pattern also suits 222 x 96mm footprint for increased versatility across a wider range of vehicle and trailer body types Surface mount from the front with adjustable bolt holes for straightforward installation and slight alignment flexibility IP68 and IP69K fully sealed and waterproof protecting against complete submersion and high-pressure water jets 9-33V operation compatible with both 12V and 24V vehicle electrical systems ADR approved for legal road use compliance on Australian road-registered vehicles 0.5m cable included for standard installation routing 7-year warranty backed by Narva for long-term commercial confidence Technical Specs Specification Details Part Number 97202 Brand Narva Model Model 72 Product Type Rear Combination Lamp Functions Stop, Tail, Direction Indicator Reverse Function No Retro Reflector In-Built Voltage Range 9-33V IP Rating IP68 and IP69K Primary Footprint 284mm x 100mm Secondary Footprint 222mm x 96mm (Adjustable Bolt Pattern) Mounting Type Surface Mount (Front) Bolt Holes Adjustable Lens Material Hardened Acrylic Cable Length 0.5 Metres ADR Approved Yes Warranty 7 Years Unit of Measure Each Product Group Lighting / Truck and Trailer Lighting Compatible With / Goes Well With The Narva 97202 Model 72 is suited for a wide range of truck, trailer, and commercial vehicle applications including: Trucks and semi-trailers requiring ADR-compliant rear combination lamps at the standard 284 x 100mm industry footprint where reverse lighting is handled separately Box trailers and enclosed trailers requiring a compact three-function rear lamp with integrated reflector Ute trays and flat deck trailers where the adjustable bolt pattern provides fitment flexibility and a dedicated reverse lamp is installed separately Agricultural machinery and farm trailers requiring durable, waterproof rear lighting rated for harsh field conditions Construction and civil equipment including tippers, site trailers, and plant machinery requiring compliant rear lighting Caravans and camper trailers requiring a reliable, long-warranty rear combination lamp where a separate reverse light is already fitted Goes well with: Narva Model 72 front and side marker lamps (for a complete matched Narva lighting setup) Narva reverse lamps (for separate reverse light installation alongside the 97202) Narva trailer wiring harnesses and connectors (for clean, ADR-compliant installations) Narva 97210 Model 72 Single Rear Combination Lamp (for applications requiring an integrated reverse function) Frequently Asked Questions Q: What is the difference between the Narva 97202 and the 97210? A: The key difference is reverse lamp functionality. The 97202 provides three functions: stop, tail, and direction indicator only. The 97210 adds an integrated reverse lamp as a fourth function. If your installation requires reverse lighting integrated into the rear combination lamp, choose the 97210. If reverse lighting is handled by a separate lamp or is not required, the 97202 is the correct choice. Q: Does the 97202 fit both the 284 x 100mm and 222 x 96mm footprints? A: Yes. The primary footprint is 284 x 100mm to suit the common industry standard for truck and trailer rear light locations. The adjustable bolt holes also accommodate the smaller 222 x 96mm footprint, providing increased installation versatility for vehicles and trailers where only the smaller mounting pattern is available. Q: Is the Narva 97202 ADR approved for road use in Australia? A: Yes. The 97202 carries ADR (Australian Design Rules) approval, confirming it meets Australian vehicle lighting standards for road-registered vehicles. It is suitable for use on trucks, trailers, and other commercial vehicles requiring legally compliant rear combination lighting. Q: Is the 97202 compatible with 24V truck electrical systems? A: Yes. The 97202 operates across a 9-33V range, making it fully compatible with both standard 12V passenger and light commercial vehicles and 24V heavy vehicles including trucks, buses, and commercial trailers without any modification or voltage conversion. Q: What warranty does the Narva 97202 carry? A: The Narva 97202 is backed by a 7-year warranty covering manufacturer defects. This extended warranty reflects Narva's confidence in the Model 72's build quality and makes it a strong choice for commercial fleet operators and owner-operators requiring long-term reliability from their rear lighting equipment.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 97210 Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable Upgrade your truck, trailer, or ute tray rear lighting with the Narva 97210 Model 72, a fully sealed four-function combination lamp featuring an in-built retro reflector, hardened acrylic lens, and a versatile dual bolt pattern footprint backed by Narva's industry-leading 7-year warranty. Product Overview The Narva 97210 is a Model 72 rear combination lamp designed for truck, trailer, and commercial vehicle applications. Integrating stop, tail, indicator, and reverse lamp functions into a single compact unit with an in-built retro reflector, the 97210 simplifies rear lighting installations while meeting ADR compliance requirements for Australian road use. The primary mounting footprint of 284 x 100mm suits the common industry standard for truck and trailer lighting locations. Adjustable bolt holes also accommodate the smaller 222 x 96mm footprint for increased installation versatility across a broader range of vehicle and trailer body configurations. Constructed with a hardened acrylic lens for superior UV and chemical resistance, the Model 72 delivers Narva's signature rear tail light appearance at night with a stylish light pipe design. Full IP68 and IP69K waterproof sealing ensures reliable operation in harsh conditions including pressure washing, submersion, and extreme weather exposure. The 9-33V operating range covers both 12V and 24V vehicle platforms, and the 0.5m cable provides sufficient length for standard installation without extension cables. Backed by a 7-year warranty, the Narva 97210 is built for the long-term demands of commercial transport, agricultural, and construction fleet applications. Features & Benefits Four-function combination lamp integrating stop, tail, indicator, and reverse functions in a single unit to simplify wiring and reduce mounting locations required In-built retro reflector providing passive rear visibility without requiring a separate reflector installation Hardened acrylic lens with superior UV and chemical resistance preventing yellowing, hazing, and degradation from prolonged exposure Signature Narva tail light appearance delivering stylish light pipe illumination at night for a professional, modern finish 284 x 100mm primary footprint matching the common industry standard for truck and trailer rear light locations Adjustable bolt pattern also suits 222 x 96mm footprint for increased versatility across a wider range of vehicle and trailer body types Surface mount from the front with adjustable bolt holes for straightforward installation and slight alignment flexibility IP68 and IP69K fully sealed and waterproof protecting against complete submersion and high-pressure water jets 9-33V operation compatible with both 12V passenger and light commercial vehicles and 24V trucks and heavy vehicles ADR approved for legal road use compliance on Australian road-registered vehicles 0.5m cable included for standard installation routing 7-year warranty backed by Narva for long-term commercial confidence Technical Specs Specification Details Part Number 97210 Brand Narva Model Model 72 Product Type Rear Combination Lamp Functions Stop, Tail, Indicator, Reverse Retro Reflector In-Built Voltage Range 9-33V IP Rating IP68 and IP69K Primary Footprint 284mm x 100mm Secondary Footprint 222mm x 96mm (Adjustable Bolt Pattern) Mounting Type Surface Mount (Front) Bolt Holes Adjustable Lens Material Hardened Acrylic Cable Length 0.5 Metres ADR Approved Yes Warranty 7 Years Unit of Measure Each Product Group Lighting / Truck and Trailer Lighting Compatible With / Goes Well With The Narva 97210 Model 72 is suited for a wide range of truck, trailer, and commercial vehicle applications including: Trucks and semi-trailers requiring ADR-compliant rear combination lamps at the standard 284 x 100mm industry footprint Box trailers and enclosed trailers requiring a compact four-function rear lamp with integrated reflector Ute trays and flat deck trailers where the adjustable bolt pattern provides fitment flexibility across different body configurations Agricultural machinery and farm trailers requiring durable, waterproof rear lighting rated for harsh field conditions Construction and civil equipment including tippers, site trailers, and plant machinery requiring compliant rear lighting Caravans and camper trailers requiring a reliable, long-warranty rear combination lamp for extended touring use Goes well with: Narva Model 72 front and side marker lamps (for a complete matched Narva lighting setup) Narva trailer wiring harnesses and connectors (for clean, ADR-compliant installations) Narva 97212 LED Tail Light Pair (for ute tray applications requiring a matched left and right sequential pair) Frequently Asked Questions Q: What is the difference between the Narva 97210 and the 97212? A: The 97210 is a single Model 72 rear combination lamp sold individually, featuring a standard indicator and an in-built retro reflector, with a primary 284 x 100mm industry footprint suited for trucks and trailers. The 97212 is sold as a matched left and right pair with sequential indicator technology, designed specifically for ute tray and canopy applications with a 222 x 96mm footprint. Choose the 97210 for standard truck and trailer installations, and the 97212 for ute tray paired setups with sequential indicators. Q: Does the 97210 fit both the 284 x 100mm and 222 x 96mm footprints? A: Yes. The primary footprint is 284 x 100mm to suit the common industry standard for truck and trailer rear light locations. The adjustable bolt holes also accommodate the smaller 222 x 96mm footprint, providing increased installation versatility for vehicles and trailers where only the smaller mounting pattern is available. Q: Is the Narva 97210 ADR approved for road use in Australia? A: Yes. The 97210 carries ADR (Australian Design Rules) approval, confirming it meets Australian vehicle lighting standards for road-registered vehicles. It is suitable for use on trucks, trailers, and other commercial vehicles requiring legally compliant rear combination lighting. Q: Is the 97210 compatible with 24V truck electrical systems? A: Yes. The 97210 operates across a 9-33V range, making it fully compatible with both standard 12V passenger and light commercial vehicles and 24V heavy vehicles including trucks, buses, and commercial trailers without any modification or voltage conversion. Q: What warranty does the Narva 97210 carry and what does it cover? A: The Narva 97210 is backed by a 7-year warranty covering manufacturer defects. This extended warranty reflects Narva's confidence in the Model 72's build quality and makes it a strong choice for commercial fleet operators and owner-operators who require long-term reliability from their rear lighting equipment.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 97212 Model 72 Rear Stop/Tail, Sequential Direction/Reverse Lamps With In-Built Retro Reflectors And 0.5M Of Hard-Wired Cable, Pair Get complete rear lighting coverage with the Narva 97212 Model 72, a matched left and right pair of fully sealed four-function combination lamps featuring sequential direction indicators, in-built retro reflectors, and a versatile dual bolt pattern footprint — all backed by Narva's industry-leading 7-year warranty. Product Overview The Narva 97212 is a Model 72 rear combination lamp pair designed for truck, trailer, and commercial vehicle applications requiring matched left and right rear lighting in a single purchase. Integrating stop, tail, sequential direction indicator, and reverse lamp functions into each unit with in-built retro reflectors, the 97212 delivers complete rear lighting compliance and a distinctive sequential indicator appearance from both sides. The sequential direction indicator progressively illuminates LEDs in the direction of the intended turn, creating a dynamic animated turn signal that enhances visibility and gives vehicles a modern, signature appearance at night. Having matched sequential indicators on both sides ensures symmetrical operation and consistent styling across the full rear of the vehicle. The primary mounting footprint of 284 x 100mm suits the common industry standard for truck and trailer lighting locations. Adjustable bolt holes also accommodate the smaller 222 x 96mm footprint for increased installation versatility across a broader range of vehicle and trailer body configurations. Constructed with a hardened acrylic lens for superior UV and chemical resistance, each lamp delivers Narva's signature rear tail light appearance at night. Full IP68 and IP69K waterproof sealing ensures reliable operation under pressure washing, submersion, and extreme weather conditions. The 9-33V operating range covers both 12V and 24V platforms, and each lamp includes 0.5m of hard-wired cable for standard installation without extension cables. Backed by a 7-year warranty, the Narva 97212 pair is built for the long-term demands of commercial transport, agricultural, and construction fleet applications. Features & Benefits Complete matched left and right pair providing symmetrical sequential indicator operation, consistent appearance, and full rear lighting compliance from both sides in a single purchase Sequential direction indicator on both lamps, progressively illuminating LEDs in the direction of the turn for dynamic, high-visibility animated turn signals Four-function combination lamp integrating stop, tail, sequential indicator, and reverse functions in each unit to simplify wiring and reduce mounting locations required In-built retro reflectors on both lamps providing passive rear visibility without requiring separate reflector installation Hardened acrylic lens with superior UV and chemical resistance preventing yellowing, hazing, and degradation from prolonged exposure Signature Narva tail light appearance delivering stylish light pipe illumination at night for a professional, modern finish 284 x 100mm primary footprint matching the common industry standard for truck and trailer rear light locations Adjustable bolt pattern also suits 222 x 96mm footprint for increased versatility across a wider range of vehicle and trailer body types Surface mount from the front with adjustable bolt holes for straightforward installation and slight alignment flexibility IP68 and IP69K fully sealed and waterproof protecting against complete submersion and high-pressure water jets 9-33V operation compatible with both 12V and 24V vehicle electrical systems ADR approved for legal road use compliance on Australian road-registered vehicles 0.5m hard-wired cable per lamp included for standard installation routing 7-year warranty backed by Narva for long-term commercial confidence Technical Specs Specification Details Part Number 97212 Brand Narva Model Model 72 Product Type Rear Combination Lamp (Pair) Package Contents 2 x Lamps (Left and Right) Functions (Per Lamp) Stop, Tail, Sequential Direction Indicator, Reverse Sequential Indicator Yes, Both Lamps Retro Reflector In-Built (Both Lamps) Voltage Range 9-33V IP Rating IP68 and IP69K Primary Footprint 284mm x 100mm Secondary Footprint 222mm x 96mm (Adjustable Bolt Pattern) Mounting Type Surface Mount (Front) Bolt Holes Adjustable Lens Material Hardened Acrylic Cable Length 0.5 Metres Hard-Wired (Per Lamp) ADR Approved Yes Warranty 7 Years Unit of Measure Each Product Group Lighting / Truck and Trailer Lighting Compatible With / Goes Well With The Narva 97212 Model 72 pair is suited for a wide range of truck, trailer, and commercial vehicle applications including: Trucks and semi-trailers requiring ADR-compliant matched rear combination lamps at the standard 284 x 100mm industry footprint Ute trays and flat deck trailers where matched left and right sequential indicator lamps are required for a symmetrical, professional installation Box trailers and enclosed trailers requiring a complete matched pair of four-function rear lamps with integrated reflectors Agricultural machinery and farm trailers requiring durable, waterproof rear lighting rated for harsh field conditions Construction and civil equipment including tippers, site trailers, and plant machinery requiring compliant rear lighting on both sides Caravans and camper trailers requiring a reliable, long-warranty matched rear lamp pair for extended touring use Goes well with: Narva Model 72 front and side marker lamps (for a complete matched Narva lighting setup) Narva trailer wiring harnesses and connectors (for clean, ADR-compliant installations) Narva 97210 Model 72 Single Rear Combination Lamp (for single-unit replacements or custom configurations) Frequently Asked Questions Q: What is the difference between the Narva 97212 and the 97210? A: The 97212 is sold as a complete matched left and right pair featuring sequential direction indicators on both lamps, making it the ideal choice for installations requiring symmetrical rear lighting on both sides of a vehicle or trailer. The 97210 is a single unit with a standard (non-sequential) indicator, suited for single-lamp replacements or installations where only one side is required. Choose the 97212 when a complete matched pair with sequential indicators is needed. Q: Does the 97212 fit both the 284 x 100mm and 222 x 96mm footprints? A: Yes. The primary footprint is 284 x 100mm to suit the common industry standard for truck and trailer rear light locations. The adjustable bolt holes also accommodate the smaller 222 x 96mm footprint, providing increased installation versatility for vehicles and trailers where only the smaller mounting pattern is available on either or both sides. Q: Are the left and right lamps in the 97212 pair different from each other? A: The lamps are functionally identical in terms of stop, tail, and reverse functions. The sequential indicator is directional — the left lamp sequences toward the left for left turns and the right lamp sequences toward the right for right turns, ensuring correct directional indication on both sides. Both lamps include an in-built retro reflector. Q: Is the Narva 97212 ADR approved for road use in Australia? A: Yes. The 97212 carries ADR (Australian Design Rules) approval, confirming it meets Australian vehicle lighting standards for road-registered vehicles. It is suitable for use on trucks, trailers, and other commercial vehicles requiring legally compliant rear combination lighting on both sides. Q: What warranty does the Narva 97212 carry? A: The Narva 97212 pair is backed by a 7-year warranty covering manufacturer defects. This extended warranty reflects Narva's confidence in the Model 72's build quality and makes it a strong choice for commercial fleet operators and owner-operators who require long-term reliability from their rear lighting equipment.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ILX3301 LED Red/Amber Side Clearance 10-30V Enhance vehicle visibility with the OEX ILX3301 LED side clearance marker light, featuring dual red/amber color options for versatile trailer, caravan, and commercial vehicle applications, wide 10-30V voltage compatibility for 12V and 24V electrical systems, compact 59mm × 34mm × 22mm dimensions for discreet mounting, energy-efficient LED technology delivering bright instant-on illumination, and comprehensive 5-year warranty coverage for long-term reliability and peace of mind. Product Overview The OEX ILX3301 represents a versatile compact side clearance marker light solution designed for trailer, caravan, truck, and commercial vehicle applications requiring side visibility illumination. This dual-color LED marker light provides both red and amber color options within a single compact unit, enabling flexible installation configurations for different vehicle positions and regulatory requirements where red markers suit rear sections while amber markers indicate forward sections. The advanced LED technology delivers bright, instant-on illumination with superior visibility compared to traditional incandescent marker lights while consuming minimal electrical power, ensuring energy-efficient operation that reduces battery drain and extends vehicle electrical system longevity. The wide 10-30V voltage range ensures compatibility across diverse vehicle electrical systems including 12V passenger vehicles, caravans, trailers, and 24V commercial trucks without requiring voltage-specific versions, providing universal installation flexibility across fleet vehicles and mixed-voltage applications. The compact 59mm × 34mm × 22mm dimensions enable discreet surface mounting in tight locations along vehicle sides, trailer bodies, and caravan panels where larger marker lights would be impractical or visually intrusive. The lightweight 60-gram construction (0.06kg) minimizes added weight on trailers and caravans where payload capacity matters, while robust construction ensures reliable operation throughout extended service life in demanding transportation environments. Comprehensive 5-year (60-month) warranty coverage demonstrates manufacturer confidence in product durability and reliability, providing long-term protection against defects and premature failures that ensures cost-effective ownership throughout extended service periods. The simple surface mount installation enables straightforward DIY fitting without specialized tools or complex mounting procedures, while LED technology eliminates bulb replacement maintenance requirements that plague traditional incandescent marker lights. The dual red/amber functionality within a single compact package simplifies parts inventory for fleet operators and commercial vehicle owners requiring multiple marker light installations across diverse vehicles and applications. Features & Benefits Dual Red/Amber Color Options Provides both red and amber color configurations within single product line, enabling flexible installation positioning where red markers suit rear vehicle sections for tail/clearance applications while amber markers indicate forward sections, simplifying parts inventory management for fleet operators requiring multiple marker light installations across vehicles without stocking separate color-specific models. Wide 10-30V Voltage Compatibility Operates reliably across extensive 10-30V voltage range that accommodates 12V passenger vehicles, caravans, trailers, and 24V commercial trucks without requiring voltage-specific versions, providing universal installation flexibility across mixed-voltage fleet applications while protecting against voltage fluctuations during engine cranking and alternator regulation for consistent performance. Compact Space-Saving Design Features minimal 59mm × 34mm × 22mm dimensions that enable discreet surface mounting in tight locations along vehicle sides, trailer bodies, caravan panels, and truck chassis where larger marker lights would be impractical, providing essential side visibility illumination without compromising aerodynamics or visual aesthetics through bulky lighting installations. Energy-Efficient LED Technology Utilizes advanced LED illumination delivering bright instant-on visibility with significantly lower power consumption compared to traditional incandescent marker lights, reducing battery drain concerns while eliminating bulb replacement maintenance requirements that ensures reliable long-term operation without ongoing bulb purchase and labor costs for maintenance-free service. Lightweight Construction Weighs just 60 grams (0.06kg) minimizing added weight on trailers, caravans, and lightweight vehicles where payload capacity and towing efficiency matter, enabling multiple marker light installations across vehicle length without significant weight penalties that would reduce cargo capacity or affect fuel economy through excessive lighting system mass. Comprehensive 5-Year Warranty Backed by extensive 60-month warranty coverage demonstrating manufacturer confidence in product durability and reliability, providing long-term protection against manufacturing defects and premature failures that ensures cost-effective ownership throughout extended service periods without unexpected replacement costs for professional-grade quality assurance. Technical Specifications Specification Details Brand OEX Model ILX3301 Product Type LED Side Clearance/Marker Light Light Type LED Light Style Side Marker Light Color Options Red/Amber (Dual Options) Voltage Range 10-30V DC Voltage Compatibility 12V and 24V Systems Dimensions 59mm (L) × 34mm (W) × 22mm (D) Length 59mm Width 34mm Depth/Thickness 22mm Weight 0.06kg (60 grams) Mounting Type Surface Mount Warranty 5 Years (60 Months) Package Depth 12.0cm Package Height 5.0cm Package Width 14.2cm Compatible With Vehicle Applications: Trailers (box trailers, flatbed trailers, enclosed trailers) Caravans and camper trailers Commercial trucks and delivery vehicles Semi-trailers and articulated vehicles Horse floats and livestock trailers Boat trailers Utility trailers Agricultural machinery and tractors Construction equipment Voltage System Compatibility: 12V passenger vehicle electrical systems 12V trailer and caravan electrical systems 24V commercial truck electrical systems 24V heavy equipment electrical systems Variable voltage applications (10-30V range) Mounting Locations: Side panels on trailers and caravans Chassis rails and structural members Truck body sides and cargo areas Equipment frames and mounting brackets Any flat or slightly curved mounting surface Color Application Guidelines: Red markers: Typically used on rear sections, tail areas, and rear-facing positions Amber markers: Typically used on forward sections, mid-body positions, and side-facing locations Verify local regulations for specific color placement requirements Regulatory Compliance: Suitable for ADR (Australian Design Rules) compliance when properly installed Check local regulations for specific marker light requirements and spacing Frequently Asked Questions What's the difference between red and amber marker lights and where should each be used? Red marker lights are typically required on rear-facing sections of vehicles, trailers, and caravans to indicate the rear perimeter and tail area. Amber marker lights are typically used on forward and mid-body side positions to indicate vehicle length and width. The ILX3301 is available in both colors, allowing you to select appropriate colors for different mounting positions according to local regulations. Will this marker light work on both 12V and 24V vehicles? Yes, the 10-30V voltage range accommodates both standard 12V passenger vehicles, trailers, and caravans, as well as 24V commercial trucks and heavy equipment. This wide voltage compatibility eliminates the need for voltage-specific versions and provides reliable operation across diverse electrical system configurations including voltage fluctuations during engine cranking. How is this marker light mounted to the vehicle? The ILX3301 is a surface mount marker light designed for installation on flat or slightly curved surfaces using mounting screws (typically included or available separately). The compact 59mm × 34mm footprint requires minimal mounting space, and the 22mm depth profile maintains low-profile appearance. Drilling small mounting holes and routing wiring to vehicle electrical system completes installation. Does LED technology eliminate bulb replacement requirements? Yes, LED marker lights like the ILX3301 use solid-state LED technology that typically lasts 50,000+ hours compared to incandescent bulbs lasting 1,000-2,000 hours. This eliminates bulb replacement maintenance, reducing ongoing costs and ensuring reliable operation throughout the product's lifetime without bulb purchase or labor expenses for replacements. What does the 5-year warranty cover? The comprehensive 60-month warranty covers manufacturing defects and component failures under normal operating conditions. This extended warranty period demonstrates OEX's confidence in product durability and provides long-term protection for your investment, ensuring reliable marker light operation throughout extended service periods with manufacturer support for defect-related issues.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less