Compact ADR-Approved Rear Position Marker with Replaceable Lens Reliable, Low-Profile, and Budget-Smart. Product Overview The LED Autolamps 58RM is a compact rear position marker from the LED Autolamps budget range, designed for trucks, trailers, caravans, and commercial vehicles requiring ADR-compliant rear marking at an accessible price point. Fitted with 2 red LEDs and supplied pre-wired with a 40cm lead, it is surface-mounted with a 28mm centre-to-centre fixing distance and draws just 0.12A at 13.8V a minimal load well suited to multi-marker trailer installations and dual battery touring builds. The clip-in replaceable lens is a standout feature at this price point when a lens is cracked or discoloured in service, it can be swapped out independently without replacing the entire lamp body. ADR compliance to CRN 36840 and ADR 49/00, IP67 waterproof rating, and a 5-year warranty round out a marker light that punches well above its budget positioning. Key Specifications LED count: 2 red LEDs Colour: Red Light style: Rear position marker Voltage: 12V – 24V IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR 49/00, CRN 36840 Mount type: Surface mount Mount centre to centre: 28mm Connector: Pre-wired, 40cm wire lead Replaceable lens: Yes (clip-in) Housing colour: Black Dimensions: 58mm (L) × 35mm (W) × 21mm (D) Current draw: 0.12A @ 13.8V Packaging: Blister pack Warranty: 5 years Features & Benefits Clip-In Replaceable Lens — The lens can be removed and replaced independently if cracked or damaged in service — an unusual and valuable feature in the budget marker category that dramatically reduces the cost of maintaining a compliant multi-lamp trailer fitout over the long term. ADR Compliant — CRN 36840 & ADR 49/00 — Full ADR road approval for use as a rear position marker on Australian registered vehicles. Specific compliance codes are on-page for fleet documentation and inspection purposes. IP67 Waterproof and Dustproof — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for wash-downs, rain, and the wet and dusty conditions encountered in Australian transport and touring environments. Pre-Wired 40cm Lead — Supplied ready to connect with a 40cm wire lead — no in-field termination required, reducing installation time on multi-marker trailer and truck builds. Low 0.12A Current Draw — Minimal electrical load per marker suits high-density marker installations common on long trailers and road trains, and reduces total draw on dual battery and solar-powered touring setups. Low Profile Surface Mount — The compact 58mm × 35mm × 21mm footprint sits close to the trailer or vehicle body, reducing exposure to impact damage at loading docks and in tight clearance environments. Clip-In Replacement Lens Availability — Spare lenses can be ordered separately as replacement parts, supporting long-term cost-effective maintenance without full lamp replacement. 5-Year Warranty — A strong warranty commitment for a budget-positioned product, providing confidence in LED Autolamps' build quality across the full range — not just the premium tier. Technical Specs Specification Detail Brand LED Autolamps Part Number 58RM LED Count 2 Colour Red Light Style Rear Position Marker Light Type LED Voltage 12V – 24V IP Rating IP67 Compliance ADR 49/00 / CRN 36840 Mount Type Surface Mount Mount Centre to Centre 28mm Connector Pre-Wired, 40cm Lead Replaceable Lens Yes (Clip-In) Housing Colour Black Length 58mm Width 35mm Depth 21mm Current Draw 0.12A @ 13.8V Packaging Blister Pack Inner Carton Qty 50 Outer Carton Qty 100 Warranty 5 Years Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) B-doubles and road trains requiring multiple rear markers Caravans and camper trailers Box trailers and flatbed trailers Horse floats and stock trailers Horse floats and stock trailers Commercial vehicles requiring ADR 49/00 rear position markers Custom trailer builds on a budget Pairs well with: LED Autolamps amber front and side position markers for a matched full-trailer LED fitout LED Autolamps combination stop/tail/indicator lamp assemblies LED Autolamps 58RM replacement lens kits (clip-in, sold separately) LED Autolamps clearance lights and number plate lights Frequently Asked Questions Is the 58RM ADR compliant for use as a rear position marker on Australian vehicles? Yes. The 58RM carries ADR approval under ADR 49/00 with compliance code CRN 36840, confirming it is road-legal for use as a rear position marker on Australian registered vehicles. What does the clip-in replaceable lens allow you to do? The clip-in lens can be removed and replaced separately if it becomes cracked, discoloured, or damaged — without replacing the entire marker lamp. Replacement lenses are available separately from the LED Autolamps range. How long is the pre-wired lead on the 58RM? The 58RM is supplied pre-wired with a 40cm wire lead. Confirm this length is sufficient for your specific mounting location and wiring run before purchasing. Extension leads may be required in some applications. What current does the 58RM draw, and is it suitable for multi-marker trailer builds? The 58RM draws 0.12A at 13.8V per lamp — a very low draw that makes it well-suited to multi-marker installations common on long trailers and road trains, with minimal total impact on the vehicle's electrical system. What is the difference between the "budget range" and the premium LED Autolamps markers? The 58RM is positioned in the LED Autolamps budget range, offering ADR compliance, IP67 rating, and a 5-year warranty at a lower price point. Premium-range LED Autolamps markers may offer higher LED counts, greater lumen output, or additional construction features. Confirm specific performance differences with LED Autolamps for your application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Side Direction Indicator 3 LEDs, Clip-In Replaceable Lens, IP67 Product Overview The LED Autolamps 58AM is a 12/24V amber side direction indicator lamp with 3 LEDs and a clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. The same compact form factor as the 58ARM, it is purpose-built for side indicator use and approved under CRN38277 and ADR 6/00. Pre-wired, IP67 rated, and backed by a 5-year warranty. Features & Benefits 3 LED amber indicator output — clean, compliant amber side direction indicator function Clip-in replaceable lens — lens swaps independently without removing the full lamp housing from the panel Compact 58mm x 35mm form factor — low-profile surface mount suits a wide range of trailer and truck body side positions ADR approved — certified under CRN38277 and ADR 6/00 for legal on-road use as a side direction indicator IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58AM Lamp Type Side Direction Indicator LED Quantity 3 LED Colour Amber Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.1A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR 6/00 — CRN38277 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring side direction indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 58ARM red/amber side marker (same 58mm x 35mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58AM approved for road use in Australia? Yes. The 58AM is ADR approved under CRN38277 and ADR 6/00, meeting Australian Design Rules requirements for legal on-road use as a side direction indicator lamp. How does the 58AM differ from the 58ARM? The 58AM is an amber-only side direction indicator certified under ADR 6/00, while the 58ARM is a red/amber dual-colour side marker certified under ADR 45/01. Both share the same 58mm x 35mm x 21mm form factor, clip-in lens, and 0.1A current draw. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp housing — reducing maintenance time and cost. What is the IP rating on the 58AM? The 58AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58AM carry? The 58AM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Red Rear End Outline Marker Twin Pack No-Fastener Fit, 50x25mm, IP67 Product Overview The LED Autolamps 5025RM2 is a red rear end outline marker lamp supplied as a twin blister pack, measuring 50mm x 25mm x 21mm with a non-fastener fitting design that eliminates the need for screws or fixings during installation. The compact, low-profile form factor suits a wide range of trailer, caravan, and truck body edge-marking applications. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Non-fastener fitting design — installs without screws or fixings, saving time and simplifying installation on trailer and caravan body panels Twin blister pack — both lamps supplied for a complete left and right installation Low-profile compact 50mm x 25mm form factor — suits tight edge-marking positions on trailer bodies and caravans ADR approved — meets Australian Design Rules for legal on-road use as a rear end outline marker IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 5025RM2 Pack Contents 2 lamps Lamp Type Rear End Outline Marker LED Colour Red Voltage Range 12V / 24V Length 50mm Width 25mm Depth 21mm Mounting Non-fastener (no screws required) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring compact rear end outline marker lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear marker lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 5025RM2 approved for road use in Australia? Yes. The 5025RM2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use as a rear end outline marker lamp. How does the non-fastener fitting work? The lamp is designed to fit without screws or traditional fasteners — it clips or presses into the mounting position, significantly reducing installation time compared to screw-mounted markers. What does the twin blister pack include? The pack contains two lamps for a complete left and right rear end outline marker installation. What is the IP rating on the 5025RM2? The 5025RM2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 5025RM2 carry? The 5025RM2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Reverse Lamp with Inbuilt Reflex Reflector Bracket Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 460WM is a 12/24V reverse lamp with an integrated reflex reflector, measuring 148mm x 122mm x 30mm and supplied with a bracket for individually mountable surface installation. The inbuilt reflector adds passive rear visibility and compliance without requiring a separate reflector unit suited to trucks, trailers, and commercial vehicles requiring a standalone reverse lamp in the 460 series format. IP67 rated and backed by a 5-year warranty. Features & Benefits Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance in a single fitting Individually mountable with bracket — supplied with a bracket for independent surface mounting on trailer and truck body panels 148mm x 122mm form factor — sized to suit the 460 series Medium Jumbo lamp family IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460WM Lamp Type Reverse / Reflector Voltage Range 12V / 24V Dimensions 148mm x 122mm x 30mm Mounting Surface mount with bracket Reflector Inbuilt reflex Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring a standalone reverse lamp in the 460 series format 12V light vehicles and 24V heavy transport applications LED Autolamps 460ARRM (stop/tail/indicator — same 460 series; add 460WM for reverse) LED Autolamps 460ARWM (full combination including reverse — alternative to pairing 460ARRM + 460WM) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460WM carry? Compliance certification was not confirmed in available supplier data — verify before road use. How does the 460WM pair with the 460ARRM? The 460ARRM covers stop, tail, and indicator functions. Adding the 460WM provides the reverse function separately — a practical option when mounting flexibility or separate circuit control of the reverse function is required. What does the inbuilt reflex reflector provide? The integrated reflector passively reflects light from other vehicles back towards the source, adding rear visibility and compliance without needing a separate reflector unit. What is the IP rating on the 460WM? The 460WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 460WM carry? The 460WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12/24V Rear Stop Lamp with Inbuilt Reflex Reflector Bracket Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 460RM is a 12/24V rear stop lamp with an integrated reflex reflector, measuring 148mm x 122mm x 30mm and supplied with a bracket for individually mountable surface installation. Matching the 460WM reverse lamp in form factor, it suits 460 series builds where individual lamp functions are mounted separately rather than as a single combination unit. IP67 rated and backed by a 5-year warranty. Features & Benefits Rear stop function — dedicated stop lamp for installations requiring individual function mounting Inbuilt reflex reflector — integrated passive reflector adds rear visibility and compliance without a separate unit Individually mountable with bracket — supplied with a bracket for independent surface mounting 148mm x 122mm form factor — matches the 460WM for a uniform appearance across the 460 series IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460RM Lamp Type Stop / Reflector Voltage Range 12V / 24V Dimensions 148mm x 122mm x 30mm Mounting Surface mount with bracket Reflector Inbuilt reflex Protection Rating IP67 Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring individually mounted stop lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 460WM reverse lamp (same 148x122mm form factor) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps 460ARRM and 460ARWM combination lamps (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What road approval standard does the 460RM carry? Compliance certification was not confirmed in available supplier data — verify before road use. How does the 460RM fit with the 460 series? The 460RM is the dedicated stop lamp in the 460 series, matching the 460WM reverse lamp in the same 148mm x 122mm x 30mm form factor — suited to builds where individual lamp functions are preferred over a single combination unit. What does the inbuilt reflex reflector provide? The integrated reflector passively reflects light from other vehicles back towards the source, adding rear visibility and compliance without needing a separate reflector unit. What is the IP rating on the 460RM? The 460RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 460RM carry? The 460RM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Medium Jumbo Stop/Tail/Indicator/Reverse Lamp with Reflex Reflectors 460x130mm, IP67 Product Overview The LED Autolamps 460ARWM is a 12/24V Medium Jumbo rear combination lamp covering stop, tail, indicator, and reverse functions with inbuilt reflex reflectors in a 460mm x 130mm x 33mm ABS base housing with acrylic lens. The 280mm centre-to-centre mount suits larger trailer and truck body rear panel configurations where the standard 275-283mm series lamps are too short. ECE road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Medium Jumbo 460mm form factor — wider than the standard 280-283mm range; suited to larger trailer bodies and truck rear panels Stop, tail, indicator, reverse, and inbuilt reflectors — five functions in a single surface-mount unit Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance Acrylic lens — good optical clarity and UV resistance for outdoor transport applications ABS base — lightweight, impact-resistant thermoplastic housing 280mm centre-to-centre mount — confirm against your panel before installation ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460ARWM Series Medium Jumbo Lamp Type Stop / Tail / Indicator / Reverse / Reflector Voltage Range 12V / 24V Dimensions 460mm x 130mm x 33mm Mount Centre-to-Centre 280mm Lens Material Acrylic Base Material ABS Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Larger trailers, trucks, and commercial vehicles requiring a wide-format rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 460ARWM approved for road use in Australia? Yes. The 460ARWM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia across all five functions. What is the Medium Jumbo classification? Medium Jumbo refers to the 460mm length — a wider format than the standard 280-283mm Mini Jumbo series, suited to larger trailer bodies and truck rear panels where a longer lamp is required for proportional rear lighting coverage. What is the difference between acrylic and polycarbonate lens materials? Acrylic (PMMA) offers good optical clarity and UV resistance. Polycarbonate is generally more impact-resistant but can yellow with UV exposure over time without UV coating. Both are common in trailer lamp lenses — acrylic suits applications where optical clarity is prioritised. What is the IP rating on the 460ARWM? The 460ARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 460ARWM carry? The 460ARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Medium Jumbo Stop/Tail/Indicator Lamp with Inbuilt Reflectors 460x130mm, IP67 Product Overview The LED Autolamps 460ARRM is a 12/24V Medium Jumbo rear combination lamp covering stop, tail, and indicator functions with inbuilt reflex reflectors in the same 460mm x 130mm x 33mm form factor as the 460ARWM. The three-function variant without reverse suited to trailer and truck applications where a separate reverse lamp is preferred or already fitted. ECE road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Medium Jumbo 460mm form factor — wider than the standard 280-283mm range; suited to larger trailer bodies and truck rear panels Stop, tail, indicator, and inbuilt reflectors — four functions in a single surface-mount unit Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance ECE road approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 460ARRM Series Medium Jumbo Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 460mm x 130mm x 33mm Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Larger trailers, trucks, and commercial vehicles requiring a wide-format stop/tail/indicator lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps 460ARWM (same form factor with reverse function) LED Autolamps 460AM rear indicator lamp (same 460 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 460ARRM approved for road use in Australia? Yes. The 460ARRM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the 460ARRM differ from the 460ARWM? The 460ARWM adds reverse function to the same 460mm x 130mm x 33mm Medium Jumbo form factor. The 460ARRM covers stop, tail, indicator, and reflectors only — suited to installations where a separate reverse lamp is already fitted or preferred. What is the Medium Jumbo classification? Medium Jumbo refers to the 460mm length — a wider format than the standard 280-283mm Mini Jumbo series, suited to larger trailer bodies and truck rear panels requiring proportionally sized rear lighting. What is the IP rating on the 460ARRM? The 460ARRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 460ARRM carry? The 460ARRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 3852 Series Stop/Tail/Indicator/Rear Combination Lamp: Rear Combination Lamp With Diffused Tail Function! LED Autolamps 3852ARWM-2 Features: Diffused Tail Function Sequential Indicator 100% Waterproof ECE Approved LED Autolamps 3852ARWM-2 Specifications: Housing Colour: Black IP Rating: IP67 Voltage Range: 12-24V Dimensions: 387mm x 105mm x 30.5mm Weight 1.65kg Legendary Products & Support From Authorized Dealers When you choose LED AUTOLAMPS, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized LED AUTOLAMPS dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by LED AUTOLAMPS's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized LED AUTOLAMPS dealer today!

Read more less

ADR Approved 12V Stop/Tail/Indicator Strip Lamp in Double Black Bracket 428x97mm, IP67 Product Overview The LED Autolamps 380BAR12 is a 12V stop, tail, and indicator strip lamp from the 380 series, supplied pre-mounted in a double black surface mount bracket. Measuring 428mm x 97mm x 22mm, the double bracket configuration houses both lamp strips side by side for a clean, factory-style installation on trailer, caravan, and commercial vehicle rear panels. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Double black bracket — both lamp strips supplied pre-mounted in a single double bracket unit for a clean, symmetrical rear panel appearance Stop, tail, and indicator in one assembly — three functions across the 380 series strips Surface mounting bracket — straightforward installation on trailer and caravan rear panels ADR road approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 380BAR12 Lamp Type Stop / Tail / Indicator Voltage 12V Dimensions 428mm x 97mm x 22mm Bracket Double black surface mount Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring a wide-format strip combination lamp assembly 12V trailer and vehicle electrical systems LED Autolamps 380BBSTI12 slimline strip lamp (same 380 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 380BAR12 approved for road use in Australia? Yes. The LED Autolamps 380BAR12 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, and indicator functions. What does the double black bracket include? The double bracket houses both 380 series lamp strips side by side in a single pre-assembled unit, ready for surface mounting on trailer and caravan rear panels. What functions does the 380BAR12 cover? It covers stop, tail, and indicator functions across the 380 series strip lamp assembly. What is the IP rating on the 380BAR12? The 380BAR12 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 380BAR12 carry? The 380BAR12 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Front White Marker Clear Lens, Black Bezel, No-Tool Fit, Harness Compatible Product Overview The LED Autolamps 37WM is a 12/24V front white marker lamp with a clear lens and black bezel, completing the 37 series alongside the 37AM, 37RM, and 37ARM. Measuring 70mm x 35mm x 20mm, it installs without tools via a serrated plug and 3M tape, and is compatible with LED Autolamps' harness systems for plug-and-play wiring integration. ECE and ADR approved, IP67 rated. Features & Benefits White LED output with clear lens — bright, clear front marker output; clean appearance when inactive Black bezel — matches the full 37 series for a consistent appearance across all marker positions No tools required — serrated plug and 3M tape allow quick, tool-free installation Harness system compatible — plugs directly into LED Autolamps' compatible harness systems Front marker function — designed for front position marking on trailers, trucks, and commercial vehicles ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 37WM Lamp Type Front Marker LED Colour White Lens Colour Clear Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring front position white marker lamps LED Autolamps harness wiring systems (confirm compatible harness with F.A.E.) LED Autolamps 37AM amber side marker (same form factor) LED Autolamps 37RM rear position red marker (same form factor) LED Autolamps 37ARM red/amber side marker (same form factor) 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37WM approved for road use in Australia? Yes. The 37WM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a front marker lamp. How does the 37WM complete the 37 series? The 37WM is the front white marker, joining the 37AM (amber side), 37RM (red rear), and 37ARM (red/amber side) — all sharing the same 70mm x 35mm x 20mm form factor, black bezel, no-tool installation, and harness compatibility for a fully matched marker lamp system. What does "no tools required" mean for installation? The 37WM uses a serrated plug for electrical connection and 3M tape for mounting — both requiring no drilling, cutting, or tools. What is the IP rating on the 37WM? The 37WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor and transport applications. What warranty does the 37WM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Rear Position Red Marker Red Lens, Black Bezel, No-Tool Fit, Harness Compatible Product Overview The LED Autolamps 37RM is a 12/24V rear position red marker lamp with a red lens and black bezel, in the same 70mm x 35mm x 20mm form factor as the 37AM. It installs without tools via a serrated plug and 3M tape, and is compatible with LED Autolamps' harness systems for plug-and-play wiring integration. The stop/tail companion to the 37AM amber side marker for a matched installation. ECE and ADR approved, IP67 rated. Features & Benefits Red lens with red LED output — consistently red appearance both active and inactive; suited to rear position marker applications Black bezel — matches the 37AM for a uniform appearance across side and rear marker positions No tools required — serrated plug and 3M tape allow quick, tool-free installation Harness system compatible — plugs directly into LED Autolamps' compatible harness systems ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 37RM Lamp Type Rear Position Marker LED Colour Red Lens Colour Red Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring quick-fit rear position red marker lamps LED Autolamps harness wiring systems LED Autolamps 37AM amber side marker (same 70x35mm form factor — matched installation pair) 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37RM approved for road use in Australia? Yes. The 37RM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a rear position marker lamp. How does the 37RM differ from the 37AM? The 37RM has a red lens and is a rear position marker, while the 37AM has a clear lens and is an amber side marker/indicator. Both share the same 70mm x 35mm x 20mm form factor, black bezel, no-tool installation, and harness compatibility. What does "no tools required" mean for installation? The 37RM uses a serrated plug for electrical connection and 3M tape for mounting — both are push-and-press installations requiring no drilling, cutting, or tools. What is the IP rating on the 37RM? The 37RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 37RM carry? Warranty information was not confirmed in available supplier data  Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/ADR Approved Red/Amber Dual-Colour Side Marker No-Tool Fit, Harness Compatible, IP67 Product Overview The LED Autolamps 37ARM is a 12/24V red/amber dual-colour side marker lamp with a black bezel, in the same 70mm x 35mm x 20mm form factor as the 37AM and 37RM. The dual red/amber lens and LED configuration delivers both red and amber outputs from different viewing angles in a single lamp meeting side marker compliance requirements where both colours are needed. ECE and ADR approved, installs without tools via serrated plug and 3M tape, and is compatible with LED Autolamps' harness systems. Features & Benefits Red/amber dual-colour lens — delivers both red and amber output from different viewing angles, meeting side marker visibility requirements for both colours in a single unit Black bezel — matches the 37AM and 37RM for a consistent appearance across all marker positions No tools required — serrated plug and 3M tape allow quick, tool-free installation Harness system compatible — plugs directly into LED Autolamps' compatible harness systems ECE and ADR approved — dual compliance for international and Australian road approval standards IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 37ARM Lamp Type Side Marker LED Colour Red / Amber Lens Colour Red / Amber Bezel Colour Black Voltage Range 12V / 24V Dimensions 70mm x 35mm x 20mm Mounting Serrated plug / 3M tape (no tools) Harness Compatible Yes Protection Rating IP67 Compliance ECE / ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring dual-colour side marker lamps LED Autolamps harness wiring systems (confirm compatible harness with F.A.E.) LED Autolamps 37AM amber side marker (same form factor) LED Autolamps 37RM rear position red marker (same form factor) 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 37ARM approved for road use in Australia? Yes. The 37ARM carries both ECE and ADR approval, meeting international and Australian road approval standards for legal on-road use as a side marker lamp. Why does a side marker lamp need both red and amber output? Side marker lamps are designed to show red from the rear and amber from the front when viewed from the side — meeting visibility compliance requirements from both directions in a single lamp unit. How does the 37ARM fit with the 37AM and 37RM? All three share the same 70mm x 35mm x 20mm form factor and black bezel. The 37AM is amber-only, the 37RM is red-only, and the 37ARM combines both colours for applications requiring dual-colour side marking — all install the same way and are harness compatible. What is the IP rating on the 37ARM? The 37ARM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 37ARM carry? Warranty information was not confirmed in available supplier data Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less