ADR 48/00 Approved 12/24V Licence Plate Lamp 1m Cable with 2-Pin Plug, CTA060024 Product Overview The LED Autolamps 35BLM1P is a 12/24V ADR-approved licence plate lamp in the same 76mm x 42mm x 30mm black bracket housing as the 35BLM, with a 1-metre cable fitted with a 2-pin plug for easy connection. Certified under ADR 48/00 (CTA060024), drawing just 0.02A at 13.8V, one lamp satisfies ADR compliance requirements. White LED output, IP67 rated, and backed by a 5-year warranty. Features & Benefits 1m cable with 2-pin plug — the extended cable and plug connector allow for tool-free connection to compatible trailer wiring without cutting or splicing White LED output — bright, clear white illumination of the number plate Black bracket — clean finish suits a wide range of trailer and vehicle rear panel aesthetics One lamp required for ADR compliance — a single 35BLM1P satisfies ADR 48/00 requirements ADR 48/00 approved — certified under CTA060024 for legal on-road use as a licence plate lamp IP67 rated — fully sealed against dust and water immersion Ultra-low current draw — 0.02A at 13.8V 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 35BLM1P Lamp Type Licence Plate Light LED Colour White Housing Colour Black Voltage Range 12V / 24V Dimensions 76mm x 42mm x 30mm Mount Centre-to-Centre 64mm Current Draw 0.02A @ 13.8V Cable Length 1m Connector 2-pin plug Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 — CTA060024 ADR Note One lamp required for compliance Packaging Polybag Warranty 5 years Compatible With / Goes Well With Trailers and vehicles requiring ADR-compliant licence plate lighting with plug-and-play connection 12V light vehicles and 24V heavy transport applications LED Autolamps 35BLM (same lamp, 40cm bare wire, blister pack) LED Autolamps 35BLMB (same lamp, 40cm bare wire, bulk) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 35BLM1P lamps are required for ADR compliance? One lamp is required to meet ADR 48/00 compliance — a single 35BLM1P provides a fully compliant number plate light installation. What is the advantage of the 2-pin plug connector? The 2-pin plug allows the lamp to connect directly to compatible trailer wiring without cutting or splicing — faster installation and cleaner wiring compared to bare wire variants. How does the 35BLM1P differ from the 35BLM? The 35BLM1P has a 1m cable with a 2-pin plug and comes in a polybag, while the 35BLM has a 40cm bare wire in a blister pack. Both are the same 76mm x 42mm black bracket lamp with ADR CTA060024 approval and 5-year warranty. What is the IP rating on the 35BLM1P? The 35BLM1P is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 35BLM1P carry? The 35BLM1P is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amber LED Side Direction Indicator Black Base, Amber Lens, ADR Approved, 10–30V, Clip-In Lens. Product Overview The LED Autolamps 35AMB is an amber LED side direction indicator from the 35 Series, featuring a black base bracket, amber lens, amber LEDs, and 30cm pre-wired cable. The "B" suffix denotes the black base variant the chrome bracket equivalent is the 35AM. Sharing the proven 58mm x 35mm x 21mm form factor of the entire 35 Series range, the 35AMB provides ADR-compliant amber side direction indicator output across a broad 10–30V voltage range. Surface mount bracket installation run wires through the back and clip the amber lens into place. ADR approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit. Key Specifications Function: Amber side direction indicator LED colour: Amber Lens: Amber clip-in replaceable Bracket colour: Black Dimensions: 58mm x 35mm x 21mm Cable: 30cm pre-wired Mount type: Surface mount clip-in lens IP rating: IP67 Input voltage: 10–30V DC (multivolt) Current draw: 0.10A @ 13.8V Compliance: ADR approved Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: 35AMB Features & Benefits Amber side direction indicator: Dedicated amber indicator function providing clear, bright directional signal output through an amber lens Black base bracket: Black bracket suits modern trailer builds; chrome bracket alternative is the 35AM Amber lens and amber LEDs: Full amber output with no colour dilution for maximum indicator visibility Clip-in replaceable lens: Amber lens clips in and out without removing the bracket for easy maintenance 30cm pre-wired cable: Sufficient cable length for most mounting locations 10–30V multivolt: Broad voltage range covering 12V and 24V systems ADR approved: Legal for amber side direction indicator use on Australian road vehicles IP67 weatherproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 35AMB Brand LED Autolamps Series 35 Series Function Amber Side Direction Indicator LED Colour Amber Lens Amber clip-in replaceable Bracket Colour Black Dimensions 58mm x 35mm x 21mm Cable Length 30cm Mount Type Surface mount clip-in lens IP Rating IP67 Input Voltage 10–30V DC (multivolt) Current Draw 0.10A @ 13.8V Compliance ADR approved Warranty 5 Years Packaging Single unit Compatible With Universal suits all 10–30V trailers, caravans, and commercial vehicles requiring amber ADR-compliant side direction indicators including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions What is the difference between the 35AMB and the 35AM? The 35AMB has a black base bracket while the 35AM has a chrome bracket. Both are otherwise identical in function, lens colour, dimensions, and compliance. Choose based on your preferred bracket colour. Is this lamp ADR approved for Australian road use? Yes the 35AMB is ADR approved for amber side direction indicator use on Australian road vehicles and trailers. What is the lens colour on this lamp? The 35AMB has an amber lens with amber LEDs providing fully saturated amber indicator output without a clear lens. This differs from clear-lens designs which rely solely on LED colour. Can the lens be replaced without removing the bracket? Yes the clip-in lens design allows lens removal and replacement without removing the bracket from the mounting surface. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Front Indicator & Park Light Chrome Bezel, 285mm, ECE/ADR Approved, IP67. Product Overview The LED Autolamps 285CAW24 is a 24V slimline front direction indicator and front position (park) lamp from the 285 Series the 24V variant of the 285CAW range, designed for commercial trucks, buses, and 24V vehicle applications requiring a low-profile front indicator and park light solution. Measuring 285mm x 25mm x 10mm, the 285 Series is one of the most space-efficient front lamp formats available, with a screw mount system and clip-on chrome end caps that conceal all fasteners for a clean, professional appearance. ECE and ADR approved, IP67 rated for complete dust and water protection, and capable of both horizontal and vertical mounting, the 285CAW24 is a versatile front lamp solution suited to a wide range of commercial vehicle body configurations. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. Key Specifications Functions: Front direction indicator + front position (park) lamp Bezel: Chrome with clip-on caps Dimensions: 285mm x 25mm x 10mm Mount type: Screw mount clip-on chrome caps conceal screws Mount orientation: Horizontal and vertical Voltage: 24V (confirmed by SKU and title see voltage note above) IP rating: IP67 Compliance: ECE and ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 285CAW24 Features & Benefits Front direction indicator and park lamp: Dual function in a single slimline unit amber indicator output and white/amber park position lamp in one 285mm body Chrome bezel with clip-on end caps: Screw mount fasteners concealed beneath clip-on chrome end caps for a clean, professional finished appearance Slimline 285mm x 25mm x 10mm: Ultra-compact form factor suited to tight front panel and cab corner mounting locations on commercial trucks and vehicles Horizontal and vertical mounting: Flexible mounting orientation accommodates a wide range of vehicle body configurations ECE and ADR approved: Certified for legal use as a front direction indicator and park lamp on Australian road vehicles IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285CAW24 Brand LED Autolamps Series 285 Series Functions Front Direction Indicator + Front Position Lamp Bezel Chrome clip-on end caps Dimensions 285mm x 25mm x 10mm Mount Type Screw mount clip-on caps Mount Orientation Horizontal and vertical Voltage 24V (confirm with supplier) IP Rating IP67 Compliance ECE and ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 24V commercial trucks, buses, and vehicles requiring slimline ECE/ADR front indicator and park lamps including: Heavy commercial trucks and prime movers Buses and coaches Commercial vans and 24V light commercial vehicles Frequently Asked Questions Is this lamp 12V or 24V? The SKU (285CAW24) and the product title both state 24V. The supplier features list states "12 Volt" this appears to be a data carry-over error from the 12V equivalent (285CAW12). Always confirm the voltage specification with your supplier before purchasing. What functions does this lamp provide? The 285CAW24 provides two functions front direction indicator (amber flashing) and front position/park lamp (white or amber steady) in a single slimline 285mm unit. How are the screws hidden? The 285 Series uses a screw mount system with clip-on chrome end caps. After mounting with screws, the chrome end caps clip over the screw positions, concealing all fasteners for a clean finished appearance. Can this lamp be mounted vertically and horizontally? Yes the 285CAW24 supports both horizontal and vertical mounting orientations, providing flexibility for different vehicle body configurations. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm voltage specification before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Stop/Tail/Indicator 16 LEDs, Black End Caps, ECE Approved, IP67, 285mm. Product Overview The LED Autolamps 285BAR12 is a 12V slimline stop/tail/indicator combination lamp from the 285 Series, featuring 16 LEDs, black end caps, and a surface mount design with 266mm centre-to-centre bolt spacing. The black end cap version the chrome equivalent in this function is the 285CAR12. Measuring just 285mm x 25mm x 10mm, the 285BAR12 delivers three rear lamp functions in one of the most compact strip lamp formats available for trailers, caravans, and light commercial vehicles. ECE approved (E9 7R02/27 6R01/28), IP67 rated, and with clearly specified current draw for each function, the 285BAR12 is a versatile slimline rear combination lamp with an 85mm cable. Backed by LED Autolamps' 5-year warranty and supplied as a single unit. Key Specifications Functions: Stop, tail, indicator LED count: 16 Lens material: Polycarbonate Base material: Polycarbonate End caps: Black clip-on Dimensions: 285mm x 25mm x 10mm Centre-to-centre mounting: 266mm Cable: 85mm Mount type: Surface mount horizontal or vertical IP rating: IP67 Input voltage: 12V only Current draw: Stop 0.24A / Tail 0.09A / Indicator 0.14A @ 13.8V ECE compliance: E9 7R02/27 6R01/28 Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: 285BAR12 Features & Benefits Three-function combination lamp: Stop, tail, and indicator in a single 285mm slimline unit, reducing lamp count and wiring complexity 16 LEDs: 16 LEDs across three functions deliver bright, clearly visible stop, tail, and indicator output Black end caps: Low-profile black clip-on end caps suit modern, dark-finish trailer and vehicle builds; chrome alternative is the 285CAR12 Polycarbonate lens and base: Durable, UV-resistant construction for long-term outdoor performance 266mm centre-to-centre mounting: Wide bolt spacing for stable, secure two-point installation ECE approved E9 7R02/27 6R01/28: Certified for legal stop, tail, and indicator use on Australian road vehicles and trailers IP67 weatherproof: Completely sealed against dust and temporary water immersion Horizontal and vertical mounting: Flexible orientation for diverse trailer and vehicle configurations 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285BAR12 Brand LED Autolamps Series 285 Series Functions Stop, Tail, Indicator LED Count 16 Lens Material Polycarbonate Base Material Polycarbonate End Caps Black clip-on Dimensions 285mm x 25mm x 10mm Centre-to-Centre Mounting 266mm Cable Length 85mm Mount Type Surface mount horizontal or vertical IP Rating IP67 Input Voltage 12V only Current Draw Stop 0.24A @ 13.8V Current Draw Tail 0.09A @ 13.8V Current Draw Indicator 0.14A @ 13.8V ECE Compliance E9 7R02/27 6R01/28 Warranty 5 Years Packaging Single unit Compatible With Suits 12V trailers, caravans, and light commercial vehicles requiring slimline ECE-compliant stop/tail/indicator lighting including: Box trailers and light trailers Caravans and camper trailers Light commercial vehicles Frequently Asked Questions How many LEDs does the 285BAR12 contain? The 285BAR12 contains 16 LEDs distributed across the three stop, tail, and indicator functions. Is this lamp ECE approved for Australian road use? Yes the 285BAR12 is ECE approved under E9 7R02/27 6R01/28, confirming legal compliance for stop, tail, and indicator functions on Australian road vehicles and trailers. What is the current draw for each function? Stop: 0.24A, Tail: 0.09A, Indicator: 0.14A all at 13.8V. These are among the lowest current draw figures for a 3-function combination lamp, reflecting the efficiency of the 285 Series LED strip design. Is there a chrome end cap version of this lamp? Yes the 285CAR12 is the chrome end cap version of the same stop/tail/indicator function. Choose based on your preferred aesthetic. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Right-Hand Sequential Indicator Combination Lamp 284 Series, Single Unit, 10–30V, ECE Approved. Product Overview The LED Autolamps 284ARWMRB is the right-hand side, single bulk unit version of the 284 Series (Zeon) sequential rear combination lamp delivering stop, diffused tail, sequential indicator, reverse, and inbuilt reflector functions in the proven 284mm x 100mm x 37mm Zeon form factor. The "RB" suffix denotes Right Hand Bulk a single lamp only, for applications where only one side needs replacement, or where a specific single-sided purchase is required. The sequential indicator sweeps outwards in a dynamic amber sequence rather than a standard on/off flash, consistent with the 284ARWM-2 twin blister pack listed earlier in this session. ECE approved for road use, the lamp features a bolt-on surface mount with stainless steel fittings and includes a 28cm pre-wired cable. Compatible with the optional MFBKT multi-fit bracket sold separately. Key Specifications Functions: Stop, tail (diffused), sequential indicator, reverse, reflector Voltage: 10–30V DC (multivolt) Orientation: Right hand side (RHS) Dimensions: 284mm x 100mm x 37mm Cable: 28cm pre-wired Mount: Horizontal surface mount stainless steel bolts, wire through 10mm hole IP rating: IP67 Compliance: ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 284ARWMRB Features & Benefits Right-hand specific: RHS orientation for correct lamp placement on the right side of the vehicle or trailer Sequential indicator: Dynamic sweeping amber LED indicator sequence for premium visibility and road presence Diffused tail function: Even, soft diffused tail light output for a premium finished appearance Single unit (bulk): Individual lamp for single-side replacement or specific single-unit installation requirements 28cm pre-wired cable: Ready for direct installation Stainless steel bolt mount: Secure, corrosion-resistant surface mounting MFBKT compatible: Suits the LED Autolamps multi-fit bracket for tray vehicle installations (sold separately) ECE approved: Legal for Australian road use across all functions IP67 weatherproof: Completely sealed against dust and temporary water immersion 10–30V multivolt: Suits 12V and 24V systems 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 284ARWMRB Brand LED Autolamps Series 284 Series (Zeon) Functions Stop, Diffused Tail, Sequential Indicator, Reverse, Reflector Orientation Right Hand Side (RHS) Voltage 10–30V DC (multivolt) Dimensions 284mm x 100mm x 37mm Cable Length 28cm Mount Type Horizontal surface mount stainless steel bolts Mounting Hole 10mm for wire IP Rating IP67 Current Stop 0.18A @ 13.8V / 0.08A @ 28V Current Tail 0.14A @ 13.8V / 0.07A @ 28V Current Indicator 0.3A @ 13.8V / 0.15A @ 28V Current Reverse 0.14A @ 13.8V / 0.08A @ 28V Compliance ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 10–30V trailers, caravans, ute trays, and commercial vehicles: 4WD tray and canopy builds Caravans and camper trailers Box trailers and light commercial trailers Small to medium trucks Frequently Asked Questions Is this a left or right-hand lamp? This is the right-hand side (RHS) lamp. For the left-hand side refer to the 284ARWMLB. For a matched left and right pair, refer to the 284ARWM-2 twin blister pack. What is the difference between the 284ARWMRB and the 284ARWM-2? The 284ARWM-2 is a matched left and right pair in a twin blister pack. The 284ARWMRB is the right-hand lamp only as a single bulk unit useful for single-side replacement. Is the MFBKT bracket included? No the MFBKT multi-fit bracket is sold separately. It is compatible with the 284ARWMRB for tray vehicle applications. What is the sequential indicator? The sequential indicator LEDs sweep outwards in a dynamic amber sequence rather than a standard on/off flash a premium indicator style for improved visibility and road presence. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White LED Front Marker with Inbuilt Reflector Permanent 3M Mount, Low Profile, ADR/ECE, IP67. Product Overview The LED Autolamps EU38WMHD is a white LED front end outline (FEO) marker lamp with an integrated reflex reflector from the EU38 series the standard housing version of the EU38 white front marker range. Measuring just 100mm x 38mm x 13mm with an ultra-slim 13mm profile, the EU38WMHD provides ADR and ECE compliant white front marker and reflector coverage in a single compact unit for permanent adhesive mounting on trailer frames, cab corners, and body panels. The permanent 3M adhesive tape mount and serrated plug locator system makes installation fast and clean no tools, no screws, no brackets. The curved diamond pattern polycarbonate lens houses white LEDs with an integrated reflex reflector for combined active and passive front marker compliance. Compatible with both 12V and 24V systems, IP67 rated, and backed by LED Autolamps' 5-year warranty. Key Specifications Function: White front end outline (FEO) marker with integrated reflex reflector LED colour: White Lens: Polycarbonate curved diamond pattern Dimensions: 100mm x 38mm x 13mm (depth 13mm) Locator spacing: 60mm centres (2x serrated plugs) Cable: Approx. 35cm Mount: Permanent 3M adhesive tape Mounting hole: 1x 8mm hole for cable IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: EU38WMHD Features & Benefits Permanent 3M adhesive mount: Fast, clean installation peel and press for a permanent, low-profile result without screws or brackets Ultra-slim 13mm profile: Sits nearly flush with the mounting surface for unobtrusive front marker positioning Integrated reflex reflector: Combines active white LED output and passive reflector compliance in a single compact unit White LED front marker: Bright white output for front end outline marker applications on 12V and 24V trailers and commercial vehicles Curved diamond pattern polycarbonate lens: Durable, UV-resistant lens in the signature EU38 series style ADR and ECE approved: Meets Australian Design Rules and ECE standards for white front marker use on road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial truck applications 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU EU38WMHD Brand LED Autolamps Series EU38 Series Function White Front End Outline Marker + Inbuilt Reflector LED Colour White Lens Polycarbonate curved diamond pattern Depth 13mm Length 100mm Width 38mm Locator Spacing 60mm centres (2x serrated plugs) Cable Length Approx. 35cm Mount Type Permanent 3M adhesive tape Mounting Hole 1x 8mm for cable IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Packaging Single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring white ADR-compliant front end outline markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions How does the EU38WMHD differ from the EU38WMHDB? The EU38WMHD and EU38WMHDB share identical specifications same function, dimensions, and compliance. The difference is the housing colour the EU38WMHDB features a black housing while the EU38WMHD is the standard housing variant. Confirm which housing suits your application before purchasing. Is this mount truly permanent? The 3M adhesive tape creates a strong, reliable permanent bond to the mounting surface. Ensure the surface is clean and correctly positioned before applying removal after bonding may damage the lamp or surface. Is this lamp ADR approved for Australian road use? Yes the EU38WMHD is ADR and ECE approved for white front end outline marker use on Australian road vehicles and trailers. Does this lamp include a reflex reflector? Yes an integrated reflex reflector provides both active white LED output and passive reflective compliance in a single unit. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm mounting requirements and quantity needed before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Modern Square Combination Lamp Stop, Tail, Indicator & Reverse in a Single 284mm Black Unit. Product Overview The LED Autolamps 282ARWM is a four-function LED combination lamp delivering stop, tail, indicator, and reverse functions in a single modern square unit. Measuring 284mm x 100mm x 27mm with a distinctive bubble diamond lens pattern, the 282ARWM brings a contemporary aesthetic to trailer, caravan, 4WD, and light commercial vehicle rear lighting while meeting ADR and ECE compliance requirements across all four functions. The black housing and diamond lens design give this lamp a sharper, more modern appearance compared to traditional rectangular combination lamps. Mounting is via rear bolts through a 10mm hole in the fixing surface the lamp can be mounted either horizontally or vertically, offering installation flexibility not available on most combination lamps. Pre-wired with a 20cm cable and supplied individually in blister packaging, the 282ARWM is backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator, reverse Housing colour: Black Lens: Bubble diamond pattern Dimensions: 284mm x 100mm x 27mm Mount type: Horizontal or vertical surface mount rear bolts through 10mm hole Cable length: 20cm Wiring: Brown = tail / Red = stop / Yellow = indicator / White = earth IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Pack quantity: Single unit blister pack Brand: LED Autolamps SKU: 282ARWM Features & Benefits Four-function combination lamp: Stop, tail, indicator, and reverse in a single unit, simplifying wiring and reducing lamp count for rear lighting installations Horizontal or vertical mounting: Unique for a combination lamp of this size the 282ARWM can be mounted either horizontally or vertically, allowing installation flexibility across a wide range of trailer, tray, and vehicle configurations Modern bubble diamond lens: The distinctive bubble diamond lens pattern gives the 282ARWM a contemporary appearance that stands out from traditional flat-faced combination lamps Black housing: Low-profile black finish suits modern trailer and commercial vehicle builds where a clean, darker lamp aesthetic is preferred Surface mount via 10mm hole: Rear bolt mounting through a 10mm hole provides a clean, secure installation with no visible front fasteners 20cm cable: Pre-wired with a 20cm lead for straightforward connection during installation Colour-coded wiring: Brown (tail), Red (stop), Yellow (indicator), White (earth) standard colour coding for fast, error-free wiring ADR and ECE approved: Fully compliant with Australian Design Rules and ECE standards for all four lamp functions IP67 weatherproof: Completely protected against dust ingress and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger and caravan trailers through to 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 282ARWM Brand LED Autolamps Series 282 Series Functions Stop, Tail, Indicator, Reverse Housing Colour Black Lens Bubble diamond pattern Dimensions 284mm x 100mm x 27mm Mount Type Horizontal or vertical surface mount rear bolts, 10mm hole Cable Length 20cm Wiring Colour Code Brown = Tail, Red = Stop, Yellow = Indicator, White = Earth IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Pack Quantity Single unit blister pack Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-compliant combination rear lighting including: 4WD and tray vehicles Caravans and camper trailers Box trailers, car trailers, and boat trailers Light commercial trucks Pairs well with: LED Autolamps 35CARM red/amber side marker LED Autolamps 42AM amber side direction indicator LED Autolamps 42WM white front position marker LED Autolamps 7030A amber and 7030R red self-adhesive reflectors Frequently Asked Questions Can this lamp be mounted vertically as well as horizontally? Yes the 282ARWM is unique in this regard. Unlike most combination lamps which are fixed to horizontal mounting only, the 282ARWM can be mounted either horizontally or vertically, providing installation flexibility for non-standard trailer and vehicle configurations. How is the 282ARWM mounted? The lamp mounts using rear bolts through a 10mm hole in the fixing surface no visible front fasteners. Refer to ADR 13/00 for mounting position and height requirements applicable to your vehicle or trailer type. Is this lamp ADR approved for all four functions? Yes the 282ARWM is ADR and ECE approved across all four functions: stop, tail, indicator, and reverse. What do the wire colours mean for this lamp? Brown = tail, Red = stop, Yellow = indicator, White = earth. Standard colour coding makes wiring quick and error-free. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions about this product. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR-Approved Amber Side Marker with Brushed Stainless Steel Bezel Low Profile Truck Style for Trailers and Commercial Vehicles Product Overview The LED Autolamps 86AAM is a low-profile amber side marker lamp featuring an amber lens with amber LEDs and a brushed stainless steel bezel, finished in the popular truck-style format widely used on trailers, caravans, horse floats, and commercial vehicles across Australia. Measuring 86mm x 31mm x 10mm, its slim 10mm profile sits flush against body panels and trailer frames without protruding or snagging. ADR approved and IP67 rated, the 86AAM meets the requirements for road-legal side marker use and handles the full exposure of outdoor and towing conditions dust, high-pressure wash, road spray, and temporary water immersion. The 12–24V operating range covers both light vehicle and heavy commercial applications without modification, and the brushed stainless steel bezel provides a corrosion-resistant, premium appearance that holds up over long service life. Backed by a 5-year warranty. Features & Benefits ADR approved — road-legal for use as a side marker lamp on Australian trailers and vehicles; meets the applicable Australian Design Rule for side marker lighting Amber lens with amber LEDs — correct colour designation for side marker lamps; high-visibility amber output for approaching vehicles from the side Brushed stainless steel bezel — corrosion-resistant, premium-finish surround that maintains its appearance in outdoor, coastal, and high-humidity environments common to Australian trailer and commercial vehicle use Popular truck style — the recognisable rectangular format used widely on heavy vehicles, semis, and commercial trailers; adds a professional finish to trailer and caravan builds Low profile 10mm depth — slim enough to mount on most trailer body panels and chassis rails without significant protrusion; 86mm x 31mm footprint suits standard side marker positions IP67 rated — 100% waterproof — fully sealed against dust and protected against temporary water immersion; suitable for boat trailers, agricultural equipment, and all-weather towing 12–24V multi-volt — operates on both 12V and 24V systems without modification; suits light trailers through to heavy commercial vehicles 5-year warranty — LED Autolamps' standard warranty applied to this lamp Technical Specs Specification Detail SKU 86AAM Lamp type Side marker Lens colour Amber LED colour Amber Bezel material Brushed stainless steel ADR compliance Yes IP rating IP67 Voltage range 12–24V Size 86mm (L) x 31mm (W) x 10mm (D) Profile Low profile Wattage / current draw Not specified — confirm with supplier LED count Not specified — confirm with supplier Mounting type Not specified — confirm with supplier Connector / wiring Not specified — confirm with supplier Warranty 5 years Compatible With / Goes Well With Trailers, caravans, horse floats, semi-trailers, and commercial vehicles requiring ADR-compliant amber side marker lamps 12V and 24V electrical systems (multi-volt, no modification required) Boat trailers and marine-adjacent applications requiring IP67-rated markers Pairs with LED Autolamps trailer lamp, combination lamp, and wiring harness range for a complete trailer lighting build Weight Not specified Frequently Asked Questions Is the lens amber or clear on this lamp? The lens is amber. Despite one line in the features section stating "clear lens", both the product title and specification description confirm "Amber Lens Coloured LEDs", consistent with the SKU designation 86AAM. Contact LED Autolamps directly if a clear lens version is required. What vehicles and applications is this side marker suited to? The 86AAM suits trailers, caravans, horse floats, semi-trailers, and commercial vehicles in the popular truck-style side marker format. ADR approval confirms it is road-legal for side marker use on Australian-registered trailers and vehicles. How is this lamp mounted and what wiring connector does it use? Mounting type and wiring connector details are not specified in the supplier data. Confirm installation requirements with LED Autolamps or contact F.A.E. before purchasing to ensure it suits your trailer or vehicle setup. Why does the stainless steel bezel matter on a trailer marker? Brushed stainless steel is significantly more corrosion-resistant than chrome-plated or painted bezels, which can rust, peel, or oxidise over time — especially on boat trailers, coastal caravans, and commercial vehicles exposed to salt, moisture, and UV. The stainless bezel maintains its appearance and structural integrity over a longer service life. What current or wattage does the 86AAM draw? Wattage and current draw figures are not included in the supplier data. If power consumption is critical for your wiring or load calculation, contact LED Autolamps for the specified draw at 12V and 24V. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Stop/Tail/Indicator/Reverse Jumbo Lamp Diffused Tail, Coloured Lens Product Overview The LED Autolamps 595BARWM is a 12/24V Jumbo rear combination lamp covering stop, tail, indicator, and reverse with a diffused tail function and coloured lens, in Jumbo blister packaging. ECE road approved and suited to wide-body trucks, heavy trailers, and commercial vehicles requiring a large-format rear combination lamp. Features & Benefits Diffused tail function — smooth, even tail light output for a premium, clean appearance Coloured lens — coloured lamp lens for a defined appearance when active ECE approved — meets international road approval standards for legal on-road use Jumbo blister packaging — supplied in Jumbo format packaging Stop, tail, indicator, and reverse — four rear lighting functions in a single unit 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 595BARWM Lamp Type Stop / Tail / Indicator / Reverse Tail Function Diffused Lens Coloured Voltage Range 12V / 24V Compliance ECE Packaging Jumbo blister Compatible With / Goes Well With Wide-body trucks, semi-trailers, and heavy commercial vehicles requiring Jumbo-format rear combination lighting 12V and 24V vehicle electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 595BARWM approved for road use in Australia? Yes. The 595BARWM is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia. What functions does the 595BARWM cover? It combines stop, tail, indicator, and reverse in a single Jumbo unit with diffused tail function. What are the dimensions of the 595BARWM? Dimensions were not confirmed in available supplier data — verify with LED Autolamps before ordering. What is the IP rating on the 595BARWM? IP rating was not confirmed in available supplier data — verify before use in exposed or wet environments. What warranty does the 595BARWM carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator/Reverse Twin Pack Black Bracket, Surface Mount, IP67 Product Overview The LED Autolamps 407BARWM-2 is a rear combination lamp twin pack covering stop, tail, indicator, and reverse functions in a black bracket surface-mount housing. Both lamps are supplied for a complete left and right rear installation. ADR Australian road approved and IP67 rated. Features & Benefits Twin pack — both lamps supplied for a complete left and right rear installation Black bracket — clean, professional finish Stop, tail, indicator, and reverse — four rear lighting functions in a single unit Surface mount — straightforward installation on trailer and vehicle rear panels ADR Australian road approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 407BARWM-2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse Housing Colour Black Voltage Range 12V / 24V Mounting Surface mount Protection Rating IP67 Compliance ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a rear combination lamp twin set 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 407BARWM-2 approved for road use in Australia? Yes. The 407BARWM-2 is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use across all four functions. Is the 407BARWM-2 supplied as a left and right pair? Yes. The twin blister pack supplies both lamps for a complete left and right rear installation. What functions does the 407BARWM-2 cover? It combines stop, tail, indicator, and reverse functions in a single surface-mount black bracket unit. What is the IP rating on the 407BARWM-2? The 407BARWM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 407BARWM-2 carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Certified 12/24V Side Indicator Lamp Surface Mount, 0.4m Cable, 5-Year Warranty Product Overview The LED Autolamps 38CAM is a 12/24V LED side indicator lamp, ADR certified for legal on-road use as a side indicator. Supplied with a 0.4m cable lead for surface mounting on trailers, trucks, and commercial vehicles. Backed by a 5-year warranty. Features & Benefits Amber LED output — correct amber colour for side indicator applications 0.4m pre-wired cable — ready to connect on installation Surface mount — straightforward installation on trailer and vehicle side panels ADR certified — meets Australian Design Rules for legal on-road use as a side indicator lamp 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 38CAM Lamp Type Side Indicator Voltage Range 12V / 24V Cable Length 0.4m Mounting Surface mount Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring side indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 38AM side direction indicator with reflector (same 38 series) LED Autolamps 38ARM red/amber side marker (same 38 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 38CAM approved for road use in Australia? Yes. The 38CAM is ADR certified, meeting Australian Design Rules requirements for legal on-road use as a side indicator lamp. What LED colour does the 38CAM produce? LED colour was not confirmed in available supplier data — amber output is expected for a side indicator application, but confirm with LED Autolamps before ordering. How does the 38CAM differ from the 38AM? The 38AM has an inbuilt reflex reflector, confirmed dimensions of 135mm x 38mm, and full ADR road approval details. The 38CAM is listed as ADR certified with a 0.4m cable but with no confirmed dimensions or reflector — confirm specific differences with LED Autolamps before ordering. What is the IP rating on the 38CAM? IP rating was not confirmed in available supplier data — verify before use in exposed or wet environments. What warranty does the 38CAM carry? The 38CAM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less