Suitable For All the Harsh Conditions that the Australian Environment Can Throw at them!3dBi 477MHz Whip UHF AntennaThe Aerpro CBW30 3dBi 477MHz UHF Whip Antenna is compatible with all brands of 477MHz UHF CB Radios in Australia and New Zealand. With 3dBi gain, this low-gain antenna has a broad radiation pattern which is best suited for short-range communication in highly built-up areas including cities, dense woodlands, and mountain regions. It produces a wider UHF signal compared to higher gain antennas which is less likely to be impacted by obstructions in these landscapes. The compact 380mm antenna features a high-quality whip mounted to an integrated short coil spring which is weather-sealed.It's perfect for installing on vehicles that are prone to vibration such as trucks, agricultural machinery, and off-road vehicles. The CBW30 is a ground-independent antenna and can be mounted virtually anywhere on the vehicle; for the best performance, it should be positioned as high as practical. It is fitted with a 4.8 metres RG58 coaxial cable which is pre-terminated with an FME connector making it easy to install through the firewall grommet in vehicles. An FME to UHF PL259 screw-on adaptor is also included for hassle-free installation.Features: Suitable for use with all 477 MHz UHF CB Radios in Australia and New Zealand 3dBi Gain has a broad radiation pattern suitable for short-range communication Suitable for use in areas with obstructions such as cities, dense woodlands, or mountain regions Recommended for use on trucks, agricultural machinery, and off-road vehicles 380mm total length whip which is weather-sealed and vibration resistant Ground independent means it can be mounted virtually anywhere on the vehicle 4.8 metres RG58 coaxial cable, insulated to reduce signal interference FME connector, fitted to cable for ease of installation through the firewall grommet in the vehicle FME to PL259 adaptor included, for solder-free installation Specifications: Frequency: 477MHz Gain: 3dBi Main Colour: Black Ground Independent: Yes Elevated Feed: No Total Length: 380mm Mast Length: 335mm Mast Width: 10mm Mast Type: Plastic Tube Whip Spring Type: Light Duty Integrated Coil Mounting Thread: 10mm Mast Mounting Thread Size: N/A Cable Type: RG58 Terminated with Female FME Cable Length: 4.8M (Approx.) Packaging Type: Side Blister Weight: 0.40kg Included Accessories: FME to PL259 Adaptor Mounting Nut Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Oricom 1dBi Magnetic Roof Mount Antenna With FME to PL259 & SMA to FME Adaptor: Easy Install, Compact & Versatile Antenna! This portable mini-mag mount antenna package offers high quality performance in an unassuming compact design. Including a robust rare-earth magnet to secure the antenna to the vehicle mounting surface, the protective layer beneath the magnet ensures no damage or scratching at the mounting point. The package suits any UHF CB Radio (fixed mount or handheld) fitted with SO239 or SMA antenna socket. While this antenna package caters to a wide array of functional purposes, a common use is to use in conjunction with a handheld UHF CB radio inside or outside the vehicle to considerably increase range and optimal performance. Length including base: 20cm. What's in the Box: Magnetic base with 3m cable Antenna (length 207mm) FME to PL259 Connector SMA to FME adaptor Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ORICOM dealer today!

Read more less

Oricom AM/FM DAB+ Radio Antenna - Black: Designed For Receiving AM & FM Frequencies of AM 522kHz to 1710kHz & FM 87MHz to 108MHz! ANB20 Antenna AM/FM DAB+ Fibreglass Pole The ANB20 is an antenna designed for receiving AM & FM frequencies of AM 522kHz to 1710kHz and FM 87MHz to 108MHz. The unit is supplied complete with a barrel spring base and fibreglass pole. Please Note: Length of antenna includes spring base. Oricom ANB20 Features: Barrel Spring Base Black Fibreglass Pole The length of the antenna is 1143mm* 5M coaxial lead and DIN 41585 male car radio antenna connector. Oricom ANB20 Specifications: Colour: Black AM Frequency Range: 552kHz ~ 1710kHz FM Frequency Range: 87MHz ~ 108MHz Antenna Length: 1143mm (Including Spring Base) Weight: 1.29kg Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Uniden 3.0 dBi Gain UHF Antenna Flexible Rubber Whip w/ Black Heat Shrink: A Highly Flexible Whip Suitable for Sedan, Agricultural and Construction Equipment Engineered and designed for high terrains and city environments, the AT380 is a rugged and durable antenna to suit your driving needs. Ground independent, removable with a 4.5m Low Coax cable and 3.0 dBi gain provides excellent performance and perfect flexibility to tune channels suitable for your vehicle. Uniden AT380 Features: High Flexible Rubber Whip with Black Heat Shrink 3.0 dBi Gain Length: 335mm Ground Independent 4.5 Metres Low Loss Coax Cable Terminated FME Female Connector and PL259 Adaptor Legendary Products & Support From Authorized Dealers When you choose UNIDEN, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized UNIDEN dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by UNIDEN's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GME On-Glass UHF CB Antenna 2.1dbi Gain: Designed To Be Discreet And Unobtrusive, Whilst Delivering Outstanding Performance And Quality The AE5002 is an Australian-made on-glass antenna, pre-tuned to 477MHz and offering 2.1dBi gain. It has an inconspicuous under-glass coupling box and is ideal for users in need of an unobtrusive UHF antenna setup. The AE5002 is suited to a wide range of vehicles, from 4WD and luxury vehicles to agricultural and earth-moving equipment. GME AE5002 Features: Under-Glass Coupling Box Ground Independent Design Pre-terminated FME Connector 2.1dBi Gain Length: 210mm What's in the Box: Antenna Whip Assembly Under-Glass Coupling Box Lead Assembly Mounting Hardware Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

*Please note some areas will incur extra charges due to the length of the item" GME Heavy Duty All Terrain Pack 2.1 & 6.6dbi Gain Black: A Range Of Rugged Heavy-Duty Radome Antennas The perfect blend of style and performance.  The All Terrain UHF CB Antenna twin pack combines two of our most popular heavy-duty antenna options – the AE4705B and AW4704B, in a convenient all-in-one package.Included in the AE4705BTP is the AE4705B, a 6.6dBi gain antenna, with a rugged, heavy-duty spring base – ideal for communication across flat, open terrain.For enhanced performance in built-up areas or mountainous terrain, simply unscrew the AW4705B antenna whip and replace it with the 2.1dBi gain AW4704B whip.Offering the ultimate in versatility and convenience, the All Terrain Pack is the perfect solution for 4WD enthusiasts who demand rugged, high-quality accessories.Also available in White (AE4705TP) GME AE4705BTP Features: Interchangeable Whips Black Fibreglass Radomes Heavy Duty Spring Base Ground Independent Design Pre-terminated FME Connector 2.1 & 6.6dBi Gain What's in the Box: Antenna Assembly (AE4705B) Antenna Whip (AW4704B) Heavy Duty Spring Base (AS004B) 4.5m Lead Assembly (ABL004) FME -> PL259 Adaptor (AD503) Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Great All-Around Performing Antenna! 4.5dBi 477MHz Black Radome UHF Antenna The Aerpro CBA2T1 4.5dBi 477MHz Black Radome UHF Antenna is compatible with all brands of 477MHz UHF CB Radios in Australia and New Zealand. With 4.5dBi gain, this medium gain antenna is a great all-around performing antenna. The elliptical radiation pattern is more rounded compared to a high-gain antenna and radiates further compared to a low-gain antenna, making it ideal for medium-range communication in various environments such as suburban landscapes, towns, and low-density woodlands.The 730mm length antenna is encased in a high-quality fibreglass tube and secured to a medium-duty stainless steel spring. Due to its heavy-duty design and weight, the CBA2T1 is recommended to be installed on the bullbar of the vehicle, making it suitable for trucks and 4WDs. The antenna is ground independent so it will maintain a stable radiation pattern. The elevated feed design helps raise the radiation pattern above the vehicle roof and other obstructions to ensure high performance when mounted on a bullbar.It is fitted with 5 metre RG58 coaxial cable which is pre-terminated with an FME connector making it easy to install through the firewall grommet in vehicles. An FME to UHF PL259 screw-on adaptor is also included as well as a mounting spanner for hassle-free installation. Built sturdy for the Australian outback, the CBA2T1 is a good all-purpose town and country antenna. Features: Suitable for use with all 477 MHz UHF CB Radios in Australia and New Zealand. 4.5dBi Gain has an elliptical radiation pattern suitable for medium-range communication. Suitable for use in areas with minimal obstructions such as suburban areas, towns, and low-density woodlands. Recommended for bullbar installation, making it suitable for trucks and 4WD's. 730mm length high-quality black fibreglass tube protects the antenna from external elements. Medium-duty stainless steel spring reduces vibrations caused by the vehicle and driving conditions. Elevated feed and ground-independent design for maintaining a stable radiation pattern. 5 metre RG58 coaxial cable, insulated to reduce signal interference. FME Female connector, fitted to cable for ease of installing through the firewall grommet in vehicle. FME Male to PL259 Male adaptor included, for solder-free installation. Installation spanner included, no additional tools required. Specifications: Frequency: 477MHz Gain: 4.5dBi Main Colour: Black Ground Independent: Yes Elevated Feed: Yes Total Length: 730mm Mast Length: 540mm Mast Width: 16mm Mast Type: Fibreglass Radome Spring Type: Medium Duty Stainless Steel Antenna Mounting Thread Size: 16mm Mast Mounting Thread Size: N/A Cable Type: RG58 Terminated With Female FME Cable Length: 5 Metre (Approx.) Packaging Type: Heatsealed Blister Weight: 0.93kg Included Accessories: FME to PL259 Adaptor Mounting Nut Installation Spanner Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Best Suited For Short-Range Communication in Highly Built-Up Areas!3dBi 477MHz 150mm Flexible UHF Antenna WhipThe Aerpro CBA15 3dBi 477MHz 150mm Flexible UHF Antenna Whip is compatible with Aerpro Elevated Feed UHF Antennas and other major brands with 5/16" mounting threads. With 3dBi gain, this low-gain antenna has a broad radiation pattern which is best suited for short-range communication in highly built-up areas including cities, dense woodlands, and mountain regions. It produces a wider UHF signal compared to higher gain antennas which is less likely to be impacted by obstructions in these landscapes.The compact 150mm antenna whip features a high-quality flexible design that is weather-sealed and fitted with a 5/16" thread for easy removal. This antenna whip is ground-dependent, so it is recommended to be mounted on an elevated feed base or ground plane for maximum performance. The CBA15 is a discrete-size antenna whip but can deliver the range when you need it.Features: Compatible with Aerpro Elevated Feed UHF Antennas and other major brands with 5/16" mounting threads. 3dBi Gain has a broad radiation pattern suitable for short-range communication. Suitable for use in areas with obstructions such as cities, dense woodlands, or mountain regions. Black mast with blue tip and polished metal threaded base. 150mm length flexible design mast which is weather sealed. 5/16" thread base for easy installation. Ground-dependent design is recommended to be mounted on an elevated feed base or ground plane for maximum performance. Specifications: Frequency: 477MHz Gain: 3dBi Main Colour: Black Ground Independent: No Total Length: 150mm Mast Length: 110mm Mast Width: 4mm Mast Type: Soft Fiberglass Whip Mast Mounting Thread Size: 5/16" Packaging Type: Heatsealed Blister Weight: 0.06kg Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Good All-Purpose Town & Country Antenna Whip! 650mm Fibreglass UHF Antenna Whip The Aerpro CBA3F1 4.5dBi 477MHz 650mm Fibreglass UHF Antenna Whip is compatible with Aerpro Elevated Feed UHF Antennas and other major brands of antennas and mounting bases with 5/16" thread. With 4.5dBi gain, this medium gain antenna is a great all round performing antenna. The elliptical radiation pattern is more rounded compared to a high gain antenna and radiates further compared to a low gain antenna, making it ideal for medium range communication in various environments such as suburban landscapes, towns and low density woodlands. The 650mm antenna whip features a fibreglass mast which is weather sealed and fitted with a 5/16" thread for easy removal. This antenna whip is ground dependent, so it is recommended to be mounted on an elevated feed base or ground plane for maximum performance. Features: Compatible with Aerpro Elevated Feed UHF Antennas and other major brands with 5/16" mounting thread 4.5dBi Gain, has an elliptical radiation pattern suitable for medium range communication Suitable for use in areas with minimal obstructions such as suburban areas, towns and low density woodlands Black fibreglass mast with blue tip and polished metal threaded base 650mm length fibreglass mast which is weather sealed Ground dependent design, recommended to be mounted on an elevated feed base or ground plane for maximum performance 5/16" thread base for easy installation Specifications: Frequency: 477MHz Gain: 4.5dBi Main Colour: Black Ground Independent: No Total Length: 650mm Mast Length: 600mm Mast Width: 6.5mm Mast Type: Fiberglass Whip Mast Mounting Thread Size: 5/16" Packaging Type: Heatsealed Blister Weight:: 0.40kg Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Oricom 3dBi Coaxial Dipole Antenna 1/2 wave vertical ground independent antenna with a highly flexible whip and convenient compact size for versatile mounting.Length including spring and base: 35cm. Oricom ANU050 Features: Antenna Length: 0.35m Coaxial cable length: 3.5m Convenient compact size for versatile mounting Highly flexible whip Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ORICOM dealer today!

Read more less

GME 600mm Antenna Whip (6.6dbi Gain) - Black: GME 600mm Antenna Whip (6.6dbi Gain) - BlackBuilt To Last The UHF CB Antenna range from GME is durable and consists of a variety of mounting, design and length options. Our antennas have a fit-for-purpose construction to suit your requirements ranging from Heavy Duty Off Road to On-Glass and Multi-Band PCB Design. Featuring a variety of gain options, there is a GME UHF CB Antenna to suit every application. It is recommended that the AE4017 are not mounted on the bull bar of diesel vehicles. GME AE4017 Features: Black Stainless Steel Whip Ground Dependent Design 6.6dBi Gain Length: 600mm What's in the Box: 6.6dBi Stainless Steel Antenna Whip (Black) Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized GME dealer today!

Read more less

Heavy-duty UHF antenna mounting engineered specifically for VW Transporter T5 owners who demand reliable communication on every journey. The GMF4x4 BB-071P is a vehicle-specific UHF antenna bonnet bracket designed exclusively for the VW Transporter Citvan T5 (2007-2010). This Australian-made bracket bolts directly to the passenger side bonnet hinge, eliminating the need for drilling or permanent modifications. Constructed from 5mm pressed steel with a durable black powder coat finish, it delivers superior strength and longevity in Australian touring conditions. The bracket accepts all standard 4WD UHF antennas and maintains full bonnet functionality after installation. Key Specifications Compatible with VW Transporter Citvan T5 (2007-2010) passenger side bonnet hinge 5mm pressed steel construction for maximum durability Black powder coated finish for corrosion resistance Bolt-on installation requiring no drilling or permanent modification Universal fitment for all standard 4WD UHF antennas Installation time approximately 5 minutes Proudly manufactured in Australia Features & Benefits Pressed 5mm Steel Construction – Engineered from heavy-duty pressed steel, this bracket withstands the harshest Australian conditions including corrugations, rough terrain, and extreme temperatures without flexing or failure. No-Drill Bolt-On Design – Attaches directly to existing bonnet hinge bolt points, preserving your vehicle's factory finish and resale value while ensuring a secure, rattle-free mount. Black Powder Coat Finish – Professional-grade powder coating resists UV damage, stone chips, and corrosion from salt air, maintaining appearance throughout years of touring and daily use. Maintains Bonnet Operation – Strategically positioned to allow full bonnet opening and closing without interference, ensuring convenient access to engine bay for maintenance and inspections. Universal UHF Antenna Compatibility – Accepts all standard 4WD UHF antenna bases, giving you flexibility to choose your preferred communication equipment without adaptor requirements. Australian-Made Quality – Manufactured locally to exacting standards, ensuring precise fitment and supporting Australian manufacturing while reducing international shipping delays. Technical Specs Material: 5mm pressed steel Finish: Black powder coat Mounting location: Passenger side bonnet hinge Fitment type: Direct bolt-on, no drilling required Installation time: Approximately 5 minutes Antenna compatibility: Universal 4WD UHF antenna fitment Country of manufacture: Australia Includes: Mounting hardware and installation instructions Frequently Asked Questions Does this bracket fit the driver side bonnet hinge? This specific model (BB-071P) is designed for passenger side fitment. A separate driver side model is available if required. Will this affect my bonnet opening or closing? No, the bracket is engineered to maintain full bonnet operation without interference or restriction during opening and closing cycles. Do I need to drill holes in my bonnet? No drilling required. The bracket bolts directly to existing bonnet hinge mounting points using supplied hardware for a secure, reversible installation. What UHF antennas are compatible with this bracket? All standard 4WD UHF antennas with universal mounting bases will fit this bracket, giving you complete flexibility in antenna selection. Is installation hardware included? Yes, all necessary mounting hardware and detailed installation instructions are included for immediate fitment upon delivery. Compatible With VW Transporter Citvan T5 (2007-2010) passenger side bonnet hinge All standard 4WD UHF antennas with universal mounting bases GME, Uniden, and other major brand UHF communication systems RG58 or equivalent coaxial antenna cables UHF radio systems for touring, work, and recreational use Note: Verify your VW Transporter model year and variant before ordering. This bracket is specific to T5 Citvan models produced between 2007-2010. Legendary Products & Support From Authorized Dealers When you choose GMF4X4, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GMF4X4 dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GMF4X4's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less