Midland PRO30LITE - Heavy-Duty UHF CB Whip Antenna for Agricultural and Construction Machinery Product Overview The Midland PRO30LITE is a heavy-duty UHF CB whip antenna engineered specifically for demanding agricultural and construction machinery applications. This flexible yet robust antenna features ground-independent design with 330mm whip height and pre-tuned 477MHz frequency optimization for Australian UHF CB channels. The PRO30LITE includes 4.5 meters of RG56 coaxial cable terminated with FME female connector, plus FME to PL259 adaptor for universal compatibility. Designed for quick replacement via SO239 base mounting, this antenna withstands harsh vibration, impacts, and environmental exposure common in tractors, earthmoving equipment, and industrial machinery. The 30-degree vertical beamwidth provides optimal communication coverage while the 50-ohm impedance and maximum 1.5:1 VSWR ensure efficient power transfer and clear signal quality. Key Features Heavy-Duty Flexible Whip - Combines flexibility with exceptional strength to absorb impacts and vibration from agricultural and construction machinery operation, preventing antenna damage while maintaining reliable signal transmission throughout demanding work conditions. Ground Independent Design - No-ground-plane requirement enables installation on non-metallic surfaces and fiberglass equipment, providing flexible mounting options for modern machinery with composite body panels or isolated mounting locations. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band eliminates complex antenna tuning procedures, ensuring optimal performance across all 80 UHF CB channels immediately upon installation without additional adjustments. SO239 Base Mounting - Standard SO239 base connector enables quick antenna replacement when damaged, reducing downtime for agricultural and construction operations requiring immediate equipment return to service. 4.5 Meter Cable Assembly - Extended RG56 coaxial cable with FME female connector provides sufficient length for equipment installations requiring remote antenna mounting locations away from radio base unit. Maximum 1.5:1 VSWR - Low voltage standing wave ratio ensures efficient power transfer from transmitter to antenna, maximizing communication range while protecting radio equipment from excessive reflected power damage. 100W Power Handling - Robust construction handles up to 100 watts power capacity, providing compatibility with high-output UHF CB radios used in commercial and industrial applications requiring extended communication range. 30° Vertical Beamwidth - Optimized radiation pattern balances local and distance communication performance, providing reliable coverage for equipment-to-equipment coordination and base station contact throughout work sites. Technical Specifications Physical Specifications: Antenna Height: 330mm Cable Length: 4.5 meters Coaxial Cable Type: RG56 Cable Connector: FME (Female) Base Connector: SO239 Included Adaptor: FME to PL259 Electrical Specifications: Frequency: Pre-tuned 477MHz VSWR: Maximum 1.5:1 Impedance: 50 Ohm Vertical Beamwidth: 30° Maximum Power: 100W Ground Plane: Independent (No Ground Plane Required) Application: Heavy-Duty Agricultural Machinery Construction Equipment Industrial Vehicles Earthmoving Equipment What's Included Midland PRO30LITE UHF CB Whip Antenna (330mm) RG56 Coaxial Cable 4.5m with FME (F) Connector FME to PL259 Adaptor Installation Notes The Midland PRO30LITE mounts to any SO239 antenna base or bracket. Thread the antenna whip onto the SO239 base connector, tightening firmly by hand without over-torquing. Route the 4.5-meter RG56 cable to the radio location, avoiding sharp bends or pinch points. Connect the FME female connector directly to compatible radio models, or use the included FME to PL259 adaptor for standard PL259 radio connections. The ground-independent design allows mounting on non-metallic surfaces without performance degradation. Ensure the antenna remains clear of overhead obstacles and moving equipment components. Test VSWR after installation to verify proper connection and tuning. The flexible whip construction absorbs impacts during machinery operation while maintaining signal integrity. Frequently Asked Questions What does ground-independent design mean? Ground-independent design means the PRO30LITE antenna does not require a metal ground plane beneath it to operate efficiently. This allows installation on fiberglass, plastic, or composite body panels common in modern agricultural and construction equipment without performance loss, unlike traditional antennas requiring large metal surfaces. Can I use this antenna on any UHF CB radio? Yes, the PRO30LITE works with any Australian UHF CB radio. The antenna includes both FME female connector and FME to PL259 adaptor, providing compatibility with radios using either connector type. The 50-ohm impedance and 477MHz pre-tuning matches all standard UHF CB radio specifications. How flexible is the whip antenna? The PRO30LITE whip combines flexibility with strength to withstand impacts from branches, overhead obstacles, and machinery vibration common in agricultural and construction environments. The flexible design prevents breakage during contact while returning to vertical position, unlike rigid antennas that snap under impact stress. What is VSWR and why is 1.5:1 important? VSWR (Voltage Standing Wave Ratio) measures how efficiently power transfers from your radio to the antenna. Maximum 1.5:1 VSWR indicates excellent power transfer with minimal reflected power. This protects your radio's transmitter from damage while maximizing communication range and signal clarity. Can I replace just the whip if damaged? Yes, the PRO30LITE features SO239 base mounting enabling quick whip replacement. Simply unscrew the damaged whip from the SO239 base and thread on a new whip without replacing the entire cable assembly. This reduces replacement costs and minimizes equipment downtime.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO6000 - 6.6dBi Heavy-Duty UHF Radome Antenna 1.0m with LMR240 Cable Product Overview The Midland PRO6000 is a high-performance 6.6dBi UHF radome antenna engineered specifically for demanding Australian outback conditions and harsh commercial applications. This professional-grade antenna features 1.026-meter tapered 20mm heavy-duty radome mast with 45mm heavy-duty barrel spring, delivering exceptional signal gain and reception range for 4x4, recreational, and commercial vehicles. The PRO6000 includes 4.5 meters of professional-grade LMR240 low-loss coaxial cable with FME female connector, reducing signal resistance by half compared to standard RG58 cable for superior performance. Pre-tuned for 477MHz Australian UHF CB frequency with ground-independent design, this antenna installs on any vehicle surface without requiring metal ground plane. The 16-degree vertical beamwidth and 200-watt power handling capability make the PRO6000 ideal for extended-range communication in remote locations, mining operations, agricultural applications, and commercial fleet vehicles requiring reliable long-distance UHF connectivity. Key Features High-Gain 6.6dBi Performance - Advanced 6.6dBi gain significantly extends communication range beyond standard antennas, enabling reliable contact across greater distances in remote outback locations, mining sites, and agricultural properties requiring extended coverage areas. Professional-Grade LMR240 Cable - 4.5-meter LMR240 low-loss coaxial cable reduces signal resistance by half compared to standard RG58 cable, maximizing power transfer from radio to antenna while minimizing signal degradation for superior transmission and reception performance. Heavy-Duty Radome Construction - 20mm tapered fiberglass radome mast with UV-stable construction withstands extreme Australian sun exposure, impacts from branches, and harsh environmental conditions without signal degradation or structural failure common in standard antennas. 45mm Heavy-Duty Barrel Spring - Robust 45mm diameter barrel spring absorbs impacts and vibration from rough terrain, preventing antenna damage during off-road 4x4 adventures, corrugated roads, and demanding commercial operations. Ground Independent Design - No ground plane requirement enables installation on fiberglass canopies, aluminum trays, composite body panels, or any vehicle surface without performance degradation, providing flexible mounting options for modern vehicles. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band eliminates complex antenna tuning procedures, ensuring optimal performance across all 80 UHF CB channels immediately upon installation without additional adjustments. 16° Vertical Beamwidth - Narrow 16-degree vertical beamwidth concentrates signal energy toward horizon for maximum long-distance communication range, ideal for flat terrain, highways, and remote locations requiring extended reach. 200W Power Handling - Robust construction handles up to 200 watts power capacity, providing compatibility with high-output UHF CB radios and future system upgrades without antenna replacement requirements. Technical Specifications Physical Specifications: Antenna Height: 1.026m (1026mm) Gain: 6.6dBi Radome Mast: 20mm Diameter Tapered Heavy-Duty Barrel Spring: 45mm Diameter Heavy-Duty Cable Length: 4.5 meters Coaxial Cable Type: Professional-Grade LMR240 Low-Loss Cable Connector: FME (Female) Included Adaptor: FME to PL259 Electrical Specifications: Frequency: Pre-tuned 477MHz VSWR: Maximum 1.5:1 Impedance: 50 Ohm Vertical Beamwidth: 16° Maximum Power: 200W Ground Plane: Independent (No Ground Plane Required) Application: 4x4 Touring and Off-Road Vehicles Commercial Fleet Vehicles Mining and Industrial Applications Agricultural Operations Recreational 4WD Adventures Remote Area Communications What's Included Midland PRO6000 UHF Radome Antenna (1.026m) 4.5m Professional-Grade LMR240 Low-Loss Coaxial Cable with FME (F) Connector FME to PL259 Adaptor Mounting Hardware Installation Notes The Midland PRO6000 installs on any UHF antenna base or bracket with standard thread mounting. Thread the antenna with spring assembly onto the mounting base, tightening firmly by hand without over-torquing the barrel spring connection. Route the 4.5-meter LMR240 cable to the radio location, avoiding sharp bends that could damage the cable. Connect the FME female connector directly to compatible radios, or use the included FME to PL259 adaptor for standard PL259 radio connections. The ground-independent design allows mounting on non-metallic surfaces without performance loss. Ensure the antenna remains clear of overhead obstacles and other antennas to prevent interference. Test VSWR after installation to verify proper connection and tuning. The heavy-duty barrel spring absorbs impacts during off-road driving while maintaining vertical antenna orientation for optimal signal propagation. Frequently Asked Questions What is the advantage of LMR240 cable over standard RG58? LMR240 professional-grade coaxial cable reduces signal resistance by approximately 50% compared to standard RG58 cable used in most antennas. This significantly lower loss means more transmit power reaches the antenna and weaker received signals maintain better quality, directly translating to extended communication range and improved clarity. How much range improvement does 6.6dBi gain provide? The 6.6dBi gain antenna provides approximately 4 times the effective radiated power compared to standard 3dBi antennas. In practical terms, expect 30-50% range increase in typical conditions. The 16-degree vertical beamwidth focuses signal energy toward the horizon, maximizing long-distance communication on flat terrain and highways. Can I install this antenna on a fiberglass canopy? Yes, the PRO6000 features ground-independent design requiring no metal ground plane beneath the antenna. This enables installation on fiberglass canopies, aluminum trays, composite tonneau covers, or any vehicle surface without performance degradation, unlike traditional antennas requiring large metal ground planes. Will the 1-meter height fit in standard parking garages? The PRO6000 stands 1.026 meters tall. When mounted on typical 4x4 roof racks or bullbars, total vehicle height may exceed 2.1-2.2 meters. Consider spring-loaded or removable antenna mounts for vehicles requiring frequent parking garage access. The heavy-duty spring provides some flexibility but permanent bending should be avoided. Is the radome mast UV-resistant for Australian conditions? Yes, the 20mm tapered fiberglass radome mast features UV-stable construction specifically engineered for harsh Australian sun exposure. The radome protects the internal radiating element from UV degradation, moisture, and impacts while maintaining signal performance throughout years of outback exposure without structural failure or discoloration.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO6000-MAST - 6.6dBi UHF CB Replacement Antenna Whip for PRO6000 Product Overview The Midland PRO6000-MAST is a genuine npleplacement antenna whip designed specifically for the Midland PRO6000 UHF antenna system. This 1.026-meter tapered 20mm heavy-duty fiberglass radome mast delivers the same 6.6dBi high-gain performance as the original PRO6000 whip, engineered to withstand harsh Australian outback conditions. The replacement whip features UV-stable fiberglass construction with pre-tuned 477MHz optimization for Australian UHF CB channels, providing cost-effective antenna restoration without replacing the entire cable assembly, spring, or mounting hardware. When the original PRO6000 whip sustains damage from branch impacts, extreme weather, or accidental breakage, this replacement mast restores full antenna performance quickly. The tapered radome design protects the internal radiating element while maintaining optimal signal transmission and reception characteristics identical to factory-original specifications, ensuring continued reliable communication for 4x4 touring, commercial fleet vehicles, and remote area operations. Key Features Genuine PRO6000 Replacement - Factory-specification replacement whip maintains identical 6.6dBi gain and electrical performance to original PRO6000 antenna, ensuring continued high-gain communication capability without system performance degradation after whip replacement. Cost-Effective Restoration - Replaces only the damaged whip component without requiring replacement of functional coaxial cable, barrel spring, or mounting hardware, significantly reducing restoration costs compared to purchasing complete antenna assembly. Heavy-Duty Radome Construction - 20mm tapered fiberglass radome mast with UV-stable construction withstands extreme Australian sun exposure, branch impacts, and harsh environmental conditions, providing long-term durability in demanding outback applications. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band maintains optimal performance across all 80 UHF CB channels without requiring re-tuning or adjustment after whip replacement, enabling immediate operational capability. Quick Replacement Installation - Simple thread-on installation to existing PRO6000 barrel spring assembly enables rapid antenna restoration in field conditions without specialized tools or technical expertise, minimizing communication downtime. Identical Performance Specifications - Maintains same 1.026-meter height and electrical characteristics as original whip, preserving established communication range and signal quality for continued reliable operation in remote locations. Technical Specifications Physical Specifications: Whip Height: 1.026m (1026mm) Gain: 6.6dBi (when installed on PRO6000 system) Radome Mast: 20mm Diameter Tapered Heavy-Duty Material: UV-Stable Fiberglass Radome Electrical Specifications: Frequency: Pre-tuned 477MHz Compatibility: Midland PRO6000 Antenna System Application: PRO6000 Antenna Restoration Replacement After Damage Spare Whip for Remote Operations What's Included Midland PRO6000-MAST Replacement Antenna Whip (1.026m) Installation Notes The Midland PRO6000-MAST replacement whip threads directly onto the existing PRO6000 barrel spring assembly. Remove the damaged original whip by unthreading it from the spring connection. Clean the barrel spring threads to ensure proper contact. Thread the PRO6000-MAST replacement whip onto the barrel spring, tightening firmly by hand until secure. Do not use tools that could over-tighten and damage the connection threads. Verify the whip sits vertically aligned when tightened. The replacement whip maintains identical electrical specifications to the original, requiring no re-tuning or VSWR adjustment after installation. The pre-tuned 477MHz optimization ensures immediate operational capability across all Australian UHF CB channels. Inspect the barrel spring for damage during whip replacement and replace if spring shows deformation or cracking. Frequently Asked Questions Is this compatible with the complete PRO6000 antenna? Yes, the PRO6000-MAST is the genuine replacement whip designed specifically for the Midland PRO6000 antenna system. It threads directly onto the PRO6000 barrel spring assembly and maintains identical electrical performance to the original whip. This replacement is ONLY compatible with PRO6000 antennas, not other Midland antenna models. Does this include the cable and spring? No, the PRO6000-MAST is the replacement whip/mast only. It does NOT include coaxial cable, barrel spring, mounting hardware, or connectors. This is designed as a cost-effective replacement for damaged whips when your existing PRO6000 cable assembly and spring remain functional. Will I need to re-tune the antenna after replacement? No, the PRO6000-MAST is pre-tuned for 477MHz Australian UHF CB frequency identical to the original whip. Simply thread the replacement whip onto your existing barrel spring assembly and the antenna maintains optimal performance across all 80 UHF CB channels without requiring re-tuning or VSWR adjustment. How do I know if I need just the whip or the complete antenna? If your PRO6000 whip is damaged (broken, bent, or cracked radome) but your coaxial cable and barrel spring remain functional, purchase the PRO6000-MAST replacement whip. If your cable is damaged, connectors are corroded, or spring is deformed, purchase the complete PRO6000 antenna assembly. Is the replacement whip as durable as the original? Yes, the PRO6000-MAST features identical 20mm tapered heavy-duty fiberglass radome construction with UV-stable materials as the original PRO6000 whip. The replacement maintains the same durability and performance characteristics designed for harsh Australian outback conditions, branch impacts, and extreme weather exposure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO70 - 6.9dBi Elevated Feed UHF Antenna 954mm with LMR240 Cable Product Overview The Midland PRO70 is a high-performance 6.9dBi elevated feed UHF antenna engineered for serious 4x4 enthusiasts, recreational tourers, and commercial fleet operators demanding superior communication range. This professional-grade antenna features 954mm heavy-duty 8mm fiberglass whip with elevated feed design and 45mm heavy-duty barrel spring, delivering exceptional signal gain and durability for demanding Australian conditions. The PRO70 includes 4.5 meters of professional-grade LMR240 low-loss coaxial cable with FME female connector, providing superior performance compared to standard RG58 cable through reduced signal resistance. Pre-tuned for 477MHz Australian UHF CB frequency with ground-independent design, this antenna installs on any vehicle surface without requiring metal ground plane. The 15-degree vertical beamwidth and 200-watt power handling capability make the PRO70 ideal for extended-range communication across remote outback locations, mining operations, agricultural properties, and commercial applications requiring reliable long-distance UHF connectivity. Key Features High-Gain 6.9dBi Performance - Advanced 6.9dBi gain delivers exceptional communication range extending well beyond standard antennas, enabling reliable contact across greater distances in remote outback locations, mining sites, and agricultural operations requiring maximum coverage. Elevated Feed Design - Specialized elevated feed configuration optimizes radiation pattern for improved signal efficiency and reduced ground losses, providing enhanced performance compared to standard antenna designs for superior transmission and reception capability. Professional-Grade LMR240 Cable - 4.5-meter LMR240 low-loss coaxial cable significantly reduces signal resistance compared to standard RG58 cable, maximizing power transfer from radio to antenna while minimizing signal degradation for superior communication performance. Heavy-Duty 8mm Fiberglass Whip - Robust 8mm fiberglass whip construction provides exceptional durability and flexibility, withstanding branch impacts, extreme weather conditions, and harsh Australian outback exposure while maintaining optimal signal transmission characteristics. 45mm Heavy-Duty Barrel Spring - Robust 45mm diameter barrel spring absorbs impacts and vibration from rough terrain, corrugated roads, and demanding off-road conditions, preventing antenna damage during 4x4 adventures and commercial operations. Ground Independent Design - No ground plane requirement enables installation on fiberglass canopies, aluminum trays, composite body panels, or any vehicle surface without performance degradation, providing flexible mounting options for modern vehicles. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band eliminates complex antenna tuning procedures, ensuring optimal performance across all 80 UHF CB channels immediately upon installation without additional adjustments. 15° Vertical Beamwidth - Narrow 15-degree vertical beamwidth concentrates signal energy toward horizon for maximum long-distance communication range, ideal for flat terrain, highways, and remote locations requiring extended reach. Technical Specifications Physical Specifications: Antenna Height: 954mm Gain: 6.9dBi Whip Type: 8mm Heavy-Duty Fiberglass Feed Design: Elevated Feed Barrel Spring: 45mm Diameter Heavy-Duty Cable Length: 4.5 meters Coaxial Cable Type: Professional-Grade LMR240 Low-Loss Cable Connector: FME (Female) Included Adaptor: FME to PL259 Electrical Specifications: Frequency: Pre-tuned 477MHz VSWR: Maximum 1.5:1 Impedance: 50 Ohm Vertical Beamwidth: 15° Maximum Power: 200W Ground Plane: Independent (No Ground Plane Required) Application: Serious 4x4 Touring and Off-Road Commercial Fleet Vehicles Mining and Industrial Applications Agricultural Operations Recreational 4WD Adventures Remote Area Communications Installation Notes The Midland PRO70 installs on any UHF antenna base or bracket with standard thread mounting. Thread the antenna with spring assembly onto the mounting base, tightening firmly by hand without over-torquing the barrel spring connection. Route the 4.5-meter LMR240 cable to the radio location, avoiding sharp bends that could damage the cable. Connect the FME female connector directly to compatible radios, or use the included FME to PL259 adaptor for standard PL259 radio connections. The ground-independent design allows mounting on non-metallic surfaces without performance loss. Ensure the antenna remains clear of overhead obstacles and other antennas to prevent interference. Test VSWR after installation to verify proper connection and tuning. The heavy-duty barrel spring absorbs impacts during off-road driving while maintaining vertical antenna orientation for optimal signal propagation. The 954mm height provides excellent range while fitting most vehicle height restrictions. Frequently Asked Questions What is elevated feed design and how does it improve performance? Elevated feed design positions the antenna's feed point higher on the whip element, optimizing the radiation pattern for reduced ground losses and improved signal efficiency. This configuration provides better performance compared to base-fed antennas, particularly in ground-independent installations, delivering stronger signals and extended communication range. How does the PRO70 compare to the PRO6000 antenna? The PRO70 offers slightly higher 6.9dBi gain versus PRO6000's 6.6dBi, with shorter 954mm height versus 1.026m. The PRO70 uses elevated feed design with 8mm fiberglass whip while PRO6000 uses 20mm radome mast. Both include LMR240 cable and provide excellent performance, with PRO70 offering marginally better gain in slightly more compact package. Is the 954mm height suitable for parking garages? The PRO70's 954mm height is approximately 72mm shorter than the PRO6000, providing better clearance for restricted-height situations. When mounted on typical 4x4 roof racks or bullbars, verify total vehicle height remains within parking garage limits. The shorter height makes PRO70 more suitable for vehicles requiring occasional urban parking access. Can I install this antenna on a fiberglass canopy? Yes, the PRO70 features ground-independent design requiring no metal ground plane beneath the antenna. This enables installation on fiberglass canopies, aluminum trays, composite tonneau covers, or any vehicle surface without performance degradation. The elevated feed design particularly benefits ground-independent installations by optimizing radiation pattern efficiency. What is the advantage of LMR240 cable? LMR240 professional-grade coaxial cable provides significantly lower signal loss compared to standard RG58 cable used in most antennas. The reduced resistance means more transmit power reaches the antenna and weaker received signals maintain better quality, directly translating to extended communication range and improved clarity across all UHF CB channels.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO7000 - 6.9dBi Heavy-Duty UHF Radome Antenna 1.2m with LMR240 Cable Product Overview The Midland PRO7000 is a premium 6.9dBi UHF radome antenna engineered specifically for maximum distance communication on flat terrain and demanding Australian outback conditions. This professional-grade antenna features 1.19-meter tapered 25mm heavy-duty radome mast with robust 55mm heavy-duty barrel spring, delivering exceptional signal gain and superior durability for serious 4x4 enthusiasts, recreational tourers, and commercial fleet operators. The PRO7000 includes 4.5 meters of professional-grade LMR240 low-loss coaxial cable with FME female connector, providing outstanding performance compared to standard cable alternatives through significantly reduced signal resistance. Pre-tuned for 477MHz Australian UHF CB frequency with ground-independent design, this antenna installs on any vehicle surface without requiring metal ground plane. The 16-degree vertical beamwidth and 200-watt power handling capability make the PRO7000 the ideal choice for extended-range communication across remote outback highways, flat agricultural terrain, mining operations, and commercial applications where maximum distance performance is the priority. Key Features Maximum Distance Performance - Advanced 6.9dBi gain combined with optimized 16-degree vertical beamwidth delivers exceptional long-distance communication capability on flat terrain, highways, and open landscapes where maximum range is the priority for remote area operations. Heavy-Duty 25mm Radome Construction - Robust 25mm tapered fiberglass radome mast with UV-stable construction provides superior durability compared to standard antennas, withstanding extreme Australian sun exposure, branch impacts, and harsh environmental conditions without signal degradation. Professional-Grade LMR240 Cable - 4.5-meter LMR240 low-loss coaxial cable delivers exceptional performance compared to standard RG58 cable, maximizing power transfer from radio to antenna while minimizing signal degradation for superior transmission and reception quality. 55mm Heavy-Duty Barrel Spring - Extra-robust 55mm diameter barrel spring provides superior impact absorption compared to standard springs, protecting antenna investment during rough terrain, corrugated roads, and demanding off-road conditions. Ground Independent Design - No ground plane requirement enables installation on fiberglass canopies, aluminum trays, composite body panels, or any vehicle surface without performance degradation, providing maximum flexibility for modern vehicle mounting configurations. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band eliminates complex antenna tuning procedures, ensuring optimal performance across all 80 UHF CB channels immediately upon installation without additional adjustments. 16° Vertical Beamwidth - Optimized 16-degree vertical beamwidth concentrates signal energy toward horizon for maximum long-distance communication on flat terrain, ideal for highway touring, desert crossings, and open agricultural landscapes. 200W Power Handling - Robust construction handles up to 200 watts power capacity, providing compatibility with high-output UHF CB radios and future system upgrades without requiring antenna replacement. Technical Specifications Physical Specifications: Antenna Height: 1.19m (1190mm) Gain: 6.9dBi Radome Mast: 25mm Diameter Tapered Heavy-Duty Barrel Spring: 55mm Diameter Heavy-Duty Cable Length: 4.5 meters Coaxial Cable Type: Professional-Grade LMR240 Low-Loss Cable Connector: FME (Female) Included Adaptor: FME to PL259 Electrical Specifications: Frequency: Pre-tuned 477MHz VSWR: Maximum 1.5:1 Impedance: 50 Ohm Vertical Beamwidth: 16° Maximum Power: 200W Ground Plane: Independent (No Ground Plane Required) Application: Serious 4x4 Touring Maximum Distance Commercial Fleet Highway Operations Mining and Remote Industrial Sites Agricultural Open Terrain Applications Flat Terrain Maximum Range Communication Remote Area Highway Touring Installation Notes The Midland PRO7000 installs on any UHF antenna base or bracket with standard thread mounting. Thread the antenna with spring assembly onto the mounting base, tightening firmly by hand without over-torquing the barrel spring connection. Route the 4.5-meter LMR240 cable to the radio location, avoiding sharp bends that could damage the cable. Connect the FME female connector directly to compatible radios, or use the included FME to PL259 adaptor for standard PL259 radio connections. The ground-independent design allows mounting on non-metallic surfaces without performance loss. Ensure the antenna remains clear of overhead obstacles and other antennas to prevent interference. Test VSWR after installation to verify proper connection and tuning. The extra-heavy-duty 55mm barrel spring absorbs severe impacts during off-road driving while maintaining vertical antenna orientation. The 1.19-meter height provides maximum range performance for flat terrain applications while requiring clearance verification for height-restricted parking. Frequently Asked Questions What makes the PRO7000 ideal for flat terrain communication? The PRO7000's 6.9dBi gain and 16-degree vertical beamwidth are specifically optimized for maximum distance communication on flat terrain, highways, and open landscapes. The narrow beamwidth concentrates signal energy toward the horizon rather than skyward, providing exceptional range across flat Australian outback highways, desert crossings, and open agricultural properties. How does the 25mm radome compare to the PRO6000's 20mm radome? The PRO7000's 25mm radome mast provides superior structural strength and durability compared to PRO6000's 20mm radome. The larger diameter radome withstands more severe impacts and harsh conditions while the 55mm barrel spring (versus PRO6000's 45mm) provides enhanced impact absorption for demanding applications. What is the height difference between PRO7000 and other models? The PRO7000 stands 1.19 meters tall, making it the tallest in the Midland professional antenna range (PRO6000: 1.026m, PRO70: 954mm). The increased height contributes to maximum distance performance on flat terrain but requires verification of total vehicle height for parking garage clearance and height-restricted areas. Can I install this antenna on a fiberglass canopy? Yes, the PRO7000 features ground-independent design requiring no metal ground plane beneath the antenna. This enables installation on fiberglass canopies, aluminum trays, composite tonneau covers, or any vehicle surface without performance degradation. The ground-independent design particularly benefits flat terrain communication by eliminating ground losses. Is the PRO7000 suitable for rough off-road conditions? Yes, the PRO7000's 55mm heavy-duty barrel spring and 25mm radome mast provide exceptional durability for severe off-road conditions. However, the 1.19-meter height makes it more susceptible to branch impacts in heavily timbered areas. For dense bush travel, consider shorter antennas like PRO70 (954mm).Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO7000-MAST - 6.9dBi UHF CB Replacement Antenna Whip for PRO7000 Product Overview The Midland PRO7000-MAST is a genuine replacement antenna whip designed specifically for the Midland PRO7000 UHF antenna system. This 1.19-meter tapered 25mm heavy-duty fiberglass radome mast delivers the same 6.9dBi high-gain performance as the original PRO7000 whip, engineered to withstand harsh Australian outback conditions. The replacement whip features UV-stable fiberglass construction with pre-tuned 477MHz optimization for Australian UHF CB channels, providing cost-effective antenna restoration without replacing the entire cable assembly, spring, or mounting hardware. When the original PRO7000 whip sustains damage from branch impacts, extreme weather, or accidental breakage, this replacement mast restores full antenna performance quickly. The tapered radome design protects the internal radiating element while maintaining optimal signal transmission and reception characteristics identical to factory-original specifications, ensuring continued reliable maximum-distance communication for flat terrain applications, 4x4 touring, commercial fleet operations, and remote area communications. Key Features Genuine PRO7000 Replacement - Factory-specification replacement whip maintains identical 6.9dBi gain and electrical performance to original PRO7000 antenna, ensuring continued high-gain maximum-distance communication capability without system performance degradation after whip replacement. Cost-Effective Restoration - Replaces only the damaged whip component without requiring replacement of functional coaxial cable, barrel spring, or mounting hardware, significantly reducing restoration costs compared to purchasing complete antenna assembly. Heavy-Duty 25mm Radome Construction - Robust 25mm tapered fiberglass radome mast with UV-stable construction withstands extreme Australian sun exposure, branch impacts, and harsh environmental conditions, providing long-term durability in demanding outback applications. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band maintains optimal performance across all 80 UHF CB channels without requiring re-tuning or adjustment after whip replacement, enabling immediate operational capability. Quick Replacement Installation - Simple thread-on installation to existing PRO7000 barrel spring assembly enables rapid antenna restoration in field conditions without specialized tools or technical expertise, minimizing communication downtime. Maximum Distance Performance Maintained - Maintains same 1.19-meter height and electrical characteristics as original whip, preserving established maximum communication range and signal quality optimized for flat terrain applications. Technical Specifications Physical Specifications: Whip Height: 1.19m (1190mm) Gain: 6.9dBi (when installed on PRO7000 system) Radome Mast: 25mm Diameter Tapered Heavy-Duty Material: UV-Stable Fiberglass Radome Electrical Specifications: Frequency: Pre-tuned 477MHz Compatibility: Midland PRO7000 Antenna System Application: PRO7000 Antenna Restoration Replacement After Damage Spare Whip for Remote Operations Installation Notes The Midland PRO7000-MAST replacement whip threads directly onto the existing PRO7000 barrel spring assembly. Remove the damaged original whip by unthreading it from the spring connection. Clean the barrel spring threads to ensure proper contact. Thread the PRO7000-MAST replacement whip onto the barrel spring, tightening firmly by hand until secure. Do not use tools that could over-tighten and damage the connection threads. Verify the whip sits vertically aligned when tightened. The replacement whip maintains identical electrical specifications to the original, requiring no re-tuning or VSWR adjustment after installation. The pre-tuned 477MHz optimization ensures immediate operational capability across all Australian UHF CB channels. Inspect the barrel spring for damage during whip replacement and replace if spring shows deformation or cracking. Frequently Asked Questions Is this compatible with the complete PRO7000 antenna? Yes, the PRO7000-MAST is the genuine replacement whip designed specifically for the Midland PRO7000 antenna system. It threads directly onto the PRO7000 barrel spring assembly and maintains identical electrical performance to the original whip. This replacement is ONLY compatible with PRO7000 antennas, not other Midland antenna models including PRO6000 or PRO70. Does this include the cable and spring? No, the PRO7000-MAST is the replacement whip/mast only. It does NOT include coaxial cable, barrel spring, mounting hardware, or connectors. This is designed as a cost-effective replacement for damaged whips when your existing PRO7000 cable assembly and spring remain functional. Will I need to re-tune the antenna after replacement? No, the PRO7000-MAST is pre-tuned for 477MHz Australian UHF CB frequency identical to the original whip. Simply thread the replacement whip onto your existing barrel spring assembly and the antenna maintains optimal performance across all 80 UHF CB channels without requiring re-tuning or VSWR adjustment. How do I know if I need just the whip or the complete antenna? If your PRO7000 whip is damaged (broken, bent, or cracked radome) but your coaxial cable and barrel spring remain functional, purchase the PRO7000-MAST replacement whip. If your cable is damaged, connectors are corroded, or spring is deformed, purchase the complete PRO7000 antenna assembly. Is the replacement whip as durable as the original? Yes, the PRO7000-MAST features identical 25mm tapered heavy-duty fiberglass radome construction with UV-stable materials as the original PRO7000 whip. The replacement maintains the same durability and performance characteristics designed for harsh Australian outback conditions, branch impacts, and extreme weather exposure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO7050 - 5.2dBi Heavy-Duty UHF Radome Antenna 0.7m with LMR240 Cable Product Overviewnpl The Midland PRO7050 is a high-performance 5.2dBi UHF radome antenna engineered for operators requiring professional-grade communication capability with height-restricted urban compatibility. This compact professional antenna features 697mm tapered 25mm heavy-duty radome mast with robust 55mm heavy-duty barrel spring, delivering excellent signal gain and superior durability in a more compact package suitable for parking garages and height-restricted areas. The PRO7050 includes 4.5 meters of professional-grade LMR240 low-loss coaxial cable with FME female connector, providing outstanding performance compared to standard cable alternatives through significantly reduced signal resistance. Pre-tuned for 477MHz Australian UHF CB frequency with ground-independent design, this antenna installs on any vehicle surface without requiring metal ground plane. The 28-degree vertical beamwidth and 200-watt power handling capability make the PRO7050 ideal for serious 4x4 enthusiasts, recreational tourers, and commercial fleet operators requiring reliable communication without extreme height limitations. Key Features Compact High-Performance Design - 5.2dBi gain in compact 697mm height package delivers excellent communication range while fitting parking garages and height-restricted urban areas, balancing professional performance with practical height considerations for daily-driver vehicles. Heavy-Duty 25mm Radome Construction - Robust 25mm tapered fiberglass radome mast with UV-stable construction provides superior durability compared to standard antennas, withstanding extreme Australian sun exposure, branch impacts, and harsh environmental conditions without signal degradation. Professional-Grade LMR240 Cable - 4.5-meter LMR240 low-loss coaxial cable delivers exceptional performance compared to standard RG58 cable, maximizing power transfer from radio to antenna while minimizing signal degradation for superior transmission and reception quality. 55mm Heavy-Duty Barrel Spring - Extra-robust 55mm diameter barrel spring provides superior impact absorption compared to standard springs, protecting antenna investment during rough terrain, corrugated roads, and demanding off-road conditions. Ground Independent Design - No ground plane requirement enables installation on fiberglass canopies, aluminum trays, composite body panels, or any vehicle surface without performance degradation, providing maximum flexibility for modern vehicle mounting configurations. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band eliminates complex antenna tuning procedures, ensuring optimal performance across all 80 UHF CB channels immediately upon installation without additional adjustments. 28° Vertical Beamwidth - Wider 28-degree vertical beamwidth provides balanced coverage for varied terrain applications, suitable for mixed urban-rural driving, regional touring, and moderate-distance communication requirements. 200W Power Handling - Robust construction handles up to 200 watts power capacity, providing compatibility with high-output UHF CB radios and future system upgrades without requiring antenna replacement. Technical Specifications Physical Specifications: Antenna Height: 697mm Gain: 5.2dBi Radome Mast: 25mm Diameter Tapered Heavy-Duty Barrel Spring: 55mm Diameter Heavy-Duty Cable Length: 4.5 meters Coaxial Cable Type: Professional-Grade LMR240 Low-Loss Cable Connector: FME (Female) Included Adaptor: FME to PL259 Electrical Specifications: Frequency: Pre-tuned 477MHz VSWR: Maximum 1.5:1 Impedance: 50 Ohm Vertical Beamwidth: 28° Maximum Power: 200W Ground Plane: Independent (No Ground Plane Required) Application: Daily-Driver 4x4 Vehicles Urban-Rural Mixed Driving Height-Restricted Parking Requirements Commercial Fleet Urban Operations Recreational Regional Touring Compact High-Performance Applications Installation Notes The Midland PRO7050 installs on any UHF antenna base or bracket with standard thread mounting. Thread the antenna with spring assembly onto the mounting base, tightening firmly by hand without over-torquing the barrel spring connection. Route the 4.5-meter LMR240 cable to the radio location, avoiding sharp bends that could damage the cable. Connect the FME female connector directly to compatible radios, or use the included FME to PL259 adaptor for standard PL259 radio connections. The ground-independent design allows mounting on non-metallic surfaces without performance loss. Ensure the antenna remains clear of overhead obstacles and other antennas to prevent interference. Test VSWR after installation to verify proper connection and tuning. The heavy-duty 55mm barrel spring absorbs impacts during off-road driving while maintaining vertical antenna orientation. The compact 697mm height provides excellent range performance while accommodating height-restricted parking facilities. Frequently Asked Questions What makes the PRO7050 suitable for daily-driver vehicles? The PRO7050's compact 697mm height allows access to most parking garages and height-restricted areas while maintaining professional-grade 5.2dBi gain performance. The combination of LMR240 cable, heavy-duty construction, and ground-independent design delivers reliable communication without height-related parking limitations common with taller antennas. How does the PRO7050 compare to taller PRO7000 and PRO6000 models? The PRO7050 offers 5.2dBi gain in compact 697mm height versus PRO7000 (6.9dBi, 1.19m) and PRO6000 (6.6dBi, 1.026m). While taller antennas provide marginally better range, the PRO7050 delivers excellent performance without height restrictions, making it ideal for vehicles requiring frequent urban parking access. Does the shorter height significantly reduce communication range? The PRO7050's 5.2dBi gain still provides excellent communication range for most applications. The professional-grade LMR240 cable and optimized 28-degree beamwidth partially offset the reduced gain from shorter height. Expect reliable communication across typical 4x4 touring, regional travel, and commercial fleet operations without extreme long-distance requirements. Can I install this antenna on a fiberglass canopy? Yes, the PRO7050 features ground-independent design requiring no metal ground plane beneath the antenna. This enables installation on fiberglass canopies, aluminum trays, composite tonneau covers, or any vehicle surface without performance degradation. The ground-independent design provides flexibility for modern vehicle mounting configurations. Is the PRO7050 as durable as taller models? Yes, the PRO7050 shares the same heavy-duty construction as taller PRO-series antennas including 25mm radome mast and 55mm barrel spring. The shorter height actually reduces leverage forces during branch impacts, potentially improving durability in heavily timbered areas while maintaining professional-grade construction quality.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Midland PRO7050-MAST - 5.2dBi UHF CB Replacement Antenna Whip for PRO7050 Product Overview The Midland PRO7050-MAST is a genuine replacement antenna whip designed specifically for the Midland PRO7050 UHF antenna system. This compact 697mm tapered 25mm heavy-duty fiberglass radome nplmast delivers the same 5.2dBi high-gain performance as the original PRO7050 whip, engineered to withstand harsh Australian outback conditions. The replacement whip features UV-stable fiberglass construction with pre-tuned 477MHz optimization for Australian UHF CB channels, providing cost-effective antenna restoration without replacing the entire cable assembly, spring, or mounting hardware. When the original PRO7050 whip sustains damage from branch impacts, extreme weather, or accidental breakage, this replacement mast restores full antenna performance quickly. The tapered radome design protects the internal radiating element while maintaining optimal signal transmission and reception characteristics identical to factory-original specifications, ensuring continued reliable professional-grade communication for daily-driver vehicles, urban-rural mixed operations, and height-restricted parking applications. Key Features Genuine PRO7050 Replacement - Factory-specification replacement whip maintains identical 5.2dBi gain and electrical performance to original PRO7050 antenna, ensuring continued professional-grade communication capability with compact parking-friendly height without system performance degradation after whip replacement. Cost-Effective Restoration - Replaces only the damaged whip component without requiring replacement of functional coaxial cable, barrel spring, or mounting hardware, significantly reducing restoration costs compared to purchasing complete antenna assembly. Heavy-Duty 25mm Radome Construction - Robust 25mm tapered fiberglass radome mast with UV-stable construction withstands extreme Australian sun exposure, branch impacts, and harsh environmental conditions, providing long-term durability in demanding applications. Pre-Tuned 477MHz - Factory-tuned for Australian UHF CB frequency band maintains optimal performance across all 80 UHF CB channels without requiring re-tuning or adjustment after whip replacement, enabling immediate operational capability. Quick Replacement Installation - Simple thread-on installation to existing PRO7050 barrel spring assembly enables rapid antenna restoration in field conditions without specialized tools or technical expertise, minimizing communication downtime. Compact Height Maintained - Maintains same 697mm height as original whip, preserving parking-friendly dimensions for height-restricted garages and urban areas while continuing to deliver professional-grade communication performance. Technical Specifications Physical Specifications: Whip Height: 697mm Gain: 5.2dBi (when installed on PRO7050 system) Radome Mast: 25mm Diameter Tapered Heavy-Duty Material: UV-Stable Fiberglass Radome Electrical Specifications: Frequency: Pre-tuned 477MHz Compatibility: Midland PRO7050 Antenna System Application: PRO7050 Antenna Restoration Replacement After Damage Spare Whip for Daily-Driver Vehicles Installation Notes The Midland PRO7050-MAST replacement whip threads directly onto the existing PRO7050 barrel spring assembly. Remove the damaged original whip by unthreading it from the spring connection. Clean the barrel spring threads to ensure proper contact. Thread the PRO7050-MAST replacement whip onto the barrel spring, tightening firmly by hand until secure. Do not use tools that could over-tighten and damage the connection threads. Verify the whip sits vertically aligned when tightened. The replacement whip maintains identical electrical specifications to the original, requiring no re-tuning or VSWR adjustment after installation. The pre-tuned 477MHz optimization ensures immediate operational capability across all Australian UHF CB channels. Inspect the barrel spring for damage during whip replacement and replace if spring shows deformation or cracking. Frequently Asked Questions Is this compatible with the complete PRO7050 antenna? Yes, the PRO7050-MAST is the genuine replacement whip designed specifically for the Midland PRO7050 antenna system. It threads directly onto the PRO7050 barrel spring assembly and maintains identical electrical performance to the original whip. This replacement is ONLY compatible with PRO7050 antennas, not other Midland antenna models including PRO7000, PRO6000, or PRO70. Does this include the cable and spring? No, the PRO7050-MAST is the replacement whip/mast only. It does NOT include coaxial cable, barrel spring, mounting hardware, or connectors. This is designed as a cost-effective replacement for damaged whips when your existing PRO7050 cable assembly and spring remain functional. Will I need to re-tune the antenna after replacement? No, the PRO7050-MAST is pre-tuned for 477MHz Australian UHF CB frequency identical to the original whip. Simply thread the replacement whip onto your existing barrel spring assembly and the antenna maintains optimal performance across all 80 UHF CB channels without requiring re-tuning or VSWR adjustment. How do I know if I need just the whip or the complete antenna? If your PRO7050 whip is damaged (broken, bent, or cracked radome) but your coaxial cable and barrel spring remain functional, purchase the PRO7050-MAST replacement whip. If your cable is damaged, connectors are corroded, or spring is deformed, purchase the complete PRO7050 antenna assembly. Is the replacement whip as durable as the original? Yes, the PRO7050-MAST features identical 25mm tapered heavy-duty fiberglass radome construction with UV-stable materials as the original PRO7050 whip. The replacement maintains the same durability and performance characteristics designed for harsh Australian outback conditions, branch impacts, and extreme weather exposure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Oricom 6dBi UHF CB Antenna with Detachable Whip: Ideal For Those Looking For Effective Communication In Australia's Relatively Flat OutbackThe ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia's relatively flat outback.This antenna's height also delivers good performance in hilly terrain.Oricom ANU410 Features: Mounting Base Complete With Spring Fiberglass Extension Pole (Full Antenna Height 1.6m) 4.5m Coaxial Cable, A Pre-terminated FME Connector And Pl259 Adaptor Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ORICOM dealer today!

Read more less

Oricom Antenna Genuine UHF CB Accessory The ANU400 is a 6dBi Fiberglass UHF CB Antenna with a heavy-duty spring base. At 1.6m height and 6dbi gain this antenna is ideal for those looking for strong communication in Australia's relatively flat outback. This antenna's height also delivers strong performance in hilly terrain. This antenna is suitable for bull bar mount. The ANU400 is finished in a black powder coating Oricom ANU400 Features: 6dBi Fiberglass pole antenna with heavy-duty spring base 1.6m Fiberglass pole (full antenna height, with spring base) 3.6m Of Cable + PL259 Connector Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ORICOM dealer today!

Read more less

Oricom 4.5dBi UHF CB Antenna: This Antenna is Built to Withstand the Harsh Conditions of the Australian OutbackA 4.5dBi fiberglass pole antenna (black) with counter balanced spring.This fiberglass antenna is extremely popular with the four-wheel drive market, and the transport industry.The ANU300 allows for a variety of mounting options from bullbar for four-wheel drives or wing mount for transport vehicles. A specific bracket will be required depending on the mounting option chosen (bracket not supplied). This dBi antenna gives good all-round performance, with high-gain and low SWR it has exceptional transmit and receive performance.Length including spring and base: 96cm.Oricom ANU300 Features: Strong Fibreglass Radome 3.6m Of Cable + PL259 Connector Stainless Steel & Fibreglass 4.5dB gain SWR < 1.5 to 1 over 8Mhz No tuning Required Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ORICOM dealer today!

Read more less

Oricom 6.5dbi EF H/duty Parallel Spring FGWThe ANU240 is a 6.5dBi ground independent UHF CB Antenna with elevatedfeed, heavy-duty parallel spring base, and fibreglass whip. The ANU240 allows for a variety of mounting options for bullbars. A specific bracket will be required depending on the mounting option chosen (bracket not supplied). The ANU240 is finished in a black powder coating.Mounting Options: Bull Bar Roof Rack Rear Heavy Vehicle Mirror Arm What's in the Box: Heavy-duty Parallel Spring Base With Fibreglass Whip Length Of Antenna Is 977mm* Low-loss Coaxial Cable (4.5m) 4.5 Low-loss Coaxial Cable, A Pre-terminated FME Connector, And Pl259 Adaptor Legendary Products & Support From Authorized Dealers When you choose ORICOM, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized ORICOM dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by ORICOM's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized ORICOM dealer today!

Read more less