12" Shallow 2-Ohm DVC Subwoofer 200W RMS, Elevated Shallow Motor Assembly, Mica-Injected Polypropylene Cone, StampCast Basket. Sealed Enclosure Only. Product Overview The Rockford Fosgate Prime R2SD2-12 is a 12" 2-Ohm Dual Voice Coil (DVC) shallow subwoofer rated at 200W RMS the 12" 2-Ohm variant of the R2 shallow platform. The larger 12" cone moves more air than the 10" shallow models, providing greater bass output in sealed enclosure applications where space depth is constrained. Optimised for sealed enclosures only. The 2-Ohm DVC provides wiring options of 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Sold as an individual unit. Construction is consistent across the R2SD range: mica-injected polypropylene cone, anodized aluminium voice coil former, linear spider with embedded 16 AWG tinsel leads, StampCast basket with integrated spider venting, 12 AWG compression terminals, and integrated PVC trim ring. Key Specifications Subwoofer size: 12 inch (shallow) Voice coil configuration: Dual Voice Coil (DVC) Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp) Power handling (RMS): 200W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Motor assembly: Shallow (elevated motor structure) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Mounting depth: Shallow — exact depth not confirmed (confirm with Rockford Fosgate) Voice coil former: Anodized aluminium Cone: Mica-injected polypropylene Surround: Not specified — confirm with Rockford Fosgate Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Input terminals: 12 AWG compression terminals Trim ring: Integrated PVC Enclosure compatibility: Sealed only ✓ Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 12" Shallow Motor Assembly — The 12" shallow driver combines the increased cone area and air-moving capacity of the larger format with the reduced mounting depth of the elevated shallow motor structure — providing more bass output than the 10" shallow models in the same depth-constrained installation space. Sealed Enclosure Only — Optimised for sealed enclosures exclusively. A sealed box produces tight, accurate bass output matched to the shallow motor's design parameters. Do not use in a vented enclosure. 200W RMS Power Handling — Confirmed 200W RMS — the same rating as the 10" shallow R2SD models, reflecting the 12" shallow motor's power handling capacity. 2-Ohm DVC — Three Wiring Options: 1-Ohm (parallel): Both coils in parallel — confirm amplifier is rated stable at 1-Ohm before using this configuration 4-Ohm (series): Both coils in series — broad amplifier compatibility 2-Ohm per coil (biamp): Each coil to a separate amplifier channel Mica-Injected Polypropylene Cone — Stiffened polypropylene for accurate, clean bass. StampCast Basket with Integrated Spider Venting — Motor cooling via basket ventilation during sustained operation. Anodized Aluminium Voice Coil Former — Improved heat radiation for extended thermal capacity. 12 AWG Compression Terminals — Secure wiring connection for 200W RMS operation. Linear Spider with Embedded 16 AWG Tinsel Leads — Consistent compliance; integrated leads reduce flex fatigue. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R2SD2-12 Series Prime R2 Subwoofer Size 12 inch (shallow) Voice Coil Dual Voice Coil (DVC) Impedance per Coil 2-Ohm ✓ Wiring Options 1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓ Power Handling (RMS) 200W ✓ Peak Power Not specified Motor Assembly Shallow (Elevated Motor Structure) ✓ Sensitivity Not specified Frequency Response Not specified Xmax Not specified Mounting Depth Shallow — exact depth not confirmed Voice Coil Former Anodized Aluminium Cone Mica-Injected Polypropylene Surround Not specified Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Input Terminals 12 AWG Compression Terminals Trim Ring Integrated PVC Enclosure Type Sealed Only ✓ Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Enclosure — sealed only: The R2SD2-12 must be used in a sealed enclosure. Do not install in a vented (ported) enclosure. Pairs well with: Rockford Fosgate T1000-1BDCP or T1500-1BDCP mono amplifiers at the appropriate impedance A shallow sealed 12" enclosure to Rockford Fosgate's recommended volume specifications Frequently Asked Questions Can the R2SD2-12 be used in a ported enclosure? No — the R2SD2-12 is optimised for sealed enclosures only. Do not install in a vented enclosure. What are the wiring options for the 2-Ohm DVC? 1-Ohm (both coils in parallel — requires amplifier rated stable at 1-Ohm), 4-Ohm (both coils in series — broadly compatible), and 2-Ohm per coil for bi-amplification. What mounting depth does the R2SD2-12 require? The supplier confirms a shallow motor assembly but the exact mounting depth is not stated. Pull from the official Rockford Fosgate R2SD2-12 datasheet before purchasing for any tight-space installation. What enclosure volume is recommended? Not confirmed in the supplier data. Pull from the official Rockford Fosgate R2SD2-12 datasheet for the recommended sealed volume. Is the 1-Ohm parallel wiring configuration safe? It is safe for the subwoofer — the driver operates correctly at 1-Ohm. The amplifier must be confirmed rated stable at 1-Ohm. Many amplifiers are not rated for 1-Ohm operation. Always confirm the amplifier's minimum stable impedance before using the 1-Ohm configuration. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" Shallow 2-Ohm DVC Subwoofer 200W RMS, Elevated Shallow Motor Assembly, Mica-Injected Polypropylene Cone, StampCast Basket. Sealed Enclosure Only. Product Overview The Rockford Fosgate Prime R2SD2-10 is a 10" 2-Ohm Dual Voice Coil (DVC) shallow subwoofer rated at 200W RMS designed specifically for tight-space installations where a standard-depth subwoofer cannot be accommodated. The shallow motor assembly uses an elevated motor structure that reduces the speaker's mounting depth while maintaining effective bass output. The R2SD2-10 is optimised for sealed enclosures only unlike the standard R2D series which suits both sealed and vented designs. The shallow motor configuration is best matched to the controlled acoustic environment of a sealed box. The 2-Ohm DVC provides wiring options of 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Construction is consistent with the R2 platform: mica-injected polypropylene cone, anodized aluminium voice coil former, linear spider with embedded 16 AWG tinsel leads, StampCast basket with integrated spider venting, 12 AWG compression terminals, and integrated PVC trim ring. Sold as an individual unit. Key Specifications Subwoofer size: 10 inch (shallow) Voice coil configuration: Dual Voice Coil (DVC) Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp) Power handling (RMS): 200W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Motor assembly: Shallow (elevated motor structure) Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Mounting depth: Shallow — exact depth not specified (confirm with Rockford Fosgate) Voice coil former: Anodized aluminium Cone: Mica-injected polypropylene Surround: Not specified — confirm with Rockford Fosgate Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Input terminals: 12 AWG compression terminals Trim ring: Integrated PVC Enclosure compatibility: Sealed only ✓ Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits Shallow Motor Assembly — The elevated motor structure reduces the overall depth of the subwoofer behind the mounting plane — enabling installation in locations where a standard-depth subwoofer would not physically fit. Under-seat, behind rear seats, and in custom enclosures with limited depth clearance are the primary applications. Sealed Enclosure Only — The R2SD2-10 is optimised exclusively for sealed enclosures. The shallow motor configuration and reduced Xmax compared to standard-depth subwoofers are best matched to the controlled, predictable acoustic loading of a sealed box. A sealed enclosure produces tight, accurate bass with a gradual roll-off — well suited to music where bass clarity is the priority. 200W RMS Power Handling — 200W RMS confirmed — appropriate for sealed shallow-mount subwoofer installations paired with a matched mono amplifier. 2-Ohm DVC — Three Wiring Configurations: 1-Ohm (parallel): Both coils in parallel — confirm amplifier is rated stable at 1-Ohm before using this configuration 4-Ohm (series): Both coils in series — broad amplifier compatibility 2-Ohm per coil (biamp): Each coil to a separate amplifier channel Mica-Injected Polypropylene Cone — Stiffened polypropylene for accurate bass reproduction with moisture resistance. StampCast Basket with Integrated Spider Venting — Ventilation openings cool the motor during sustained operation. Anodized Aluminium Voice Coil Former — Improved heat radiation for extended thermal capacity in a compact motor assembly. 12 AWG Compression Terminals — Secure, low-resistance wiring connection for 200W RMS operation. Linear Spider with Embedded 16 AWG Tinsel Leads — Consistent compliance and integrated leads for reduced flex fatigue. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R2SD2-10 Series Prime R2 Subwoofer Size 10 inch (shallow) Voice Coil Dual Voice Coil (DVC) Impedance per Coil 2-Ohm ✓ Wiring Options 1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓ Power Handling (RMS) 200W ✓ Peak Power Not specified Motor Assembly Shallow (Elevated Motor Structure) ✓ Sensitivity Not specified — confirm with Rockford Fosgate Frequency Response Not specified — confirm with Rockford Fosgate Xmax Not specified — confirm with Rockford Fosgate Mounting Depth Shallow — exact depth not confirmed Voice Coil Former Anodized Aluminium Cone Mica-Injected Polypropylene Surround Not specified — confirm with Rockford Fosgate Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Input Terminals 12 AWG Compression Terminals Trim Ring Integrated PVC Enclosure Type Sealed Only ✓ Cutout Diameter Not specified — confirm with Rockford Fosgate Sold As Individual Unit Weight Not specified — confirm with Rockford Fosgate Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Enclosure type — sealed only: The R2SD2-10 must be used in a sealed enclosure. Do not install in a vented (ported) enclosure — the shallow motor design is not optimised for vented loading. Pairs well with: Rockford Fosgate T1000-1BDCP or T1500-1BDCP mono amplifiers at the appropriate impedance A shallow sealed 10" enclosure designed to the Rockford Fosgate recommended volume for the R2SD2-10 Frequently Asked Questions Can the R2SD2-10 be used in a vented (ported) enclosure? No — the R2SD2-10 is optimised for sealed enclosures only. The shallow motor assembly and its reduced excursion compared to standard-depth subwoofers are specifically matched to sealed box loading. Installing it in a vented enclosure will not produce correct performance and may result in driver damage at higher output levels. What mounting depth does the R2SD2-10 require? The supplier confirms this is a shallow-mount subwoofer with an elevated motor structure that reduces mounting depth — but the exact depth in millimetres or inches is not confirmed in the supplier data. Pull the official Rockford Fosgate R2SD2-10 datasheet for the confirmed mounting depth before purchasing for any depth-constrained location. What are the wiring options for the 2-Ohm DVC? The 2-Ohm DVC provides three configurations: 1-Ohm (both coils in parallel — requires amplifier rated stable at 1-Ohm), 4-Ohm (both coils in series — broadly compatible), and 2-Ohm per coil for bi-amplification. What sealed enclosure volume is recommended? Enclosure volume for the sealed configuration is not confirmed in the supplier data. Pull the official Rockford Fosgate R2SD2-10 datasheet for the recommended net internal volume. How does the shallow design affect bass performance? A shallow motor assembly achieves reduced depth by elevating the motor relative to the cone — this reduces the driver's linear excursion (Xmax) compared to a full-depth subwoofer of equivalent size. The trade-off is lower maximum output below the sealed enclosure resonance frequency, which is why the R2SD2-10 is rated at 200W RMS rather than the 250W of the standard R2D series. For most under-seat and shallow enclosure applications, the output is sufficient for satisfying bass at normal listening levels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2S-1X12 Prime R2S 12" Shallow Loaded Enclosure Slim Profile, Real Bass Product Overview The Rockford Fosgate R2S-1X12 is a single 12" shallow loaded enclosure housing a Prime R2S shallow subwoofer (R2SD4-12), rated at 250 Watts RMS and 500 Watts peak, internally pre-wired to a 2-ohm load. Designed specifically for single-cab trucks, utes, and vehicles where under-seat and behind-seat depth is severely restricted, the R2S-1X12 delivers genuine 12" bass output from a slim-line wedge profile just 8.26 cm deep at the top and 13.34 cm at the base fitting where traditional enclosures simply cannot. Part of the Rockford Fosgate Prime series, the R2S-1X12 is purpose-engineered to balance accessible pricing with real-world bass performance. The R2SD4-12 shallow driver is designed specifically for reduced mounting depth, and the wedge enclosure geometry is computer-optimised for single-cab and limited seat-travel installations. Constructed from 5/8" MDF with high-density carpet and 12 AWG quick-release compression terminals, and CEA-2031 compliant, the R2S-1X12 arrives ready to install no custom box building, no driver sourcing, and no enclosure tuning required. Key Specifications Subwoofer: Single 12" Rockford Fosgate Prime R2S shallow (R2SD4-12) Power handling: 250W RMS / 500W peak Pre-wired impedance: 2 ohm (internally wired) Enclosure type: Shallow sealed wedge Construction: 5/8" MDF Finish: High-density carpet Input terminals: Up to 12 AWG quick-release compression Dimensions (H x W x D bottom x D top): 34.29 x 69.53 x 13.34 x 8.26 cm (wedge) Shipping weight: 11.15 kg CEA-2031 compliant Features & Benefits Ultra-slim wedge profile 8.26 cm at top, 13.34 cm at base: Engineered for installations where even slim-profile enclosures won't fit. The wedge geometry maximises internal volume within minimum height, making it purpose-built for single-cab trucks, utes, and vehicles with restricted under-seat or behind-seat depth common in Australian working vehicles. Prime R2S shallow 12" driver (R2SD4-12): The R2SD4-12 is specifically engineered for shallow mounting depth, not a standard driver forced into an undersized box. The result is accurate, controlled bass output suited to the sealed shallow enclosure alignment it is designed for. 250W RMS / 500W peak power handling: Accessible power requirements compatible with a wide range of entry-level and mid-range mono amplifiers. Pre-wired to 2 ohms for straightforward amplifier pairing confirm your amplifier's 2-ohm power rating before purchase. Pre-wired to 2 ohms: Factory internal wiring presents a 2-ohm load to the amplifier. No internal wiring configuration required connect your amplifier to the 12 AWG compression terminals and go. Optimised wedge design for single-cab trucks and limited seat travel: The wedge shape is specifically noted by Rockford Fosgate as optimised for single-cab truck and ute installations where seat travel limits available height. The tapered profile fits neatly behind and under seats where a flat-bottomed enclosure would not clear seat movement. CEA-2031 compliant: Power handling figures comply with the CEA-2031 standard for loaded subwoofer enclosures, providing a verified and comparable specification. 5/8" MDF construction: Rigid enclosure walls minimise panel flex and resonance at sustained 250W RMS input levels, ensuring consistent bass reproduction in the shallow sealed alignment. High-density carpet finish: Durable, professional appearance suited to daily under-seat and behind-seat use in Australian utes, trucks, and SUVs. 12 AWG quick-release compression terminals: Tool-free wiring connection and disconnection. Practical for installs where the enclosure may need to be temporarily removed common in ute and single-cab configurations. Lightweight at 11.15 kg: Easy to handle and install for a single person, making it a practical DIY-friendly option for Australian ute and truck owners. Prime series value positioning: The R2S-1X12 delivers Rockford Fosgate engineering and factory tuning at the accessible Prime series price point a genuine step up from generic shallow enclosures without the cost of the Punch P3S shallow range. Technical Specs Specification Detail SKU R2S-1X12 Brand Rockford Fosgate Subwoofer Driver 12" Rockford Fosgate Prime R2S shallow (R2SD4-12) Woofer Quantity 1 Power Handling 250W RMS / 500W peak Pre-Wired Impedance 2 ohm (internally wired) Enclosure Type Shallow sealed wedge Construction Material 5/8" MDF Finish High-density carpet Input Terminals Up to 12 AWG quick-release compression CEA-2031 Compliant Yes Dimensions (H x W x D bottom x D top) 34.29 x 69.53 x 13.34 x 8.26 cm (wedge) Shipping Weight 11.15 kg Warranty Confirm with supplier Compatible With Mono amplifiers stable at 2 ohms, rated at or near 250W RMS at 2 ohms Rockford Fosgate Prime and Punch series mono amplifiers Single-cab trucks and utes with behind-seat or under-seat depth restrictions Dual-cab utes and SUVs with limited under-seat height clearance Vehicles where the Punch P3S-1X12 or P3S-1X10 price point exceeds the budget but shallow enclosure format is required Rockford Fosgate wiring kits for 2-ohm mono amplifier installation Rockford Fosgate RCA cables and signal accessories Frequently Asked Questions What amplifier does the R2S-1X12 require? The R2S-1X12 is pre-wired to 2 ohms and handles 250W RMS. A mono amplifier stable at 2 ohms and rated at or near 250W RMS at 2 ohms is recommended such as a compatible Rockford Fosgate Prime or Punch mono amplifier. Confirm your amplifier's 2-ohm rating before purchase. How shallow is the R2S-1X12 enclosure? The R2S-1X12 wedge profile is 13.34 cm deep at the base and just 8.26 cm deep at the top, with an overall height of 34.29 cm and width of 69.53 cm. It is specifically optimised for single-cab trucks and utes where seat travel limits available mounting depth. How does the R2S-1X12 compare to the Punch P3S-1X12? Both are shallow sealed wedge enclosures for behind-seat ute and truck installs. The P3S-1X12 uses a higher-pedigree Punch P3S shallow driver with 400W RMS power handling and 10 AWG terminals. The R2S-1X12 uses a Prime R2S shallow driver with 250W RMS and 12 AWG terminals making it the more budget-accessible shallow loaded enclosure option in the Rockford Fosgate range. Is the R2S-1X12 a sealed or vented enclosure? The R2S-1X12 is a sealed shallow wedge enclosure. The sealed design delivers controlled, accurate bass response suited to the shallow driver alignment and the space-restricted mounting environments this enclosure is designed for. Is the R2S-1X12 easy to install without professional help? Yes. At 11.15 kg and with 12 AWG quick-release compression terminals, the R2S-1X12 is a manageable DIY install for a single person. Connect power, ground, signal, and speaker wiring to a compatible 2-ohm mono amplifier and the system is ready to use. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

10" 2-Ohm Dual Voice Coil Subwoofer 250W RMS, Mica-Injected Polypropylene Cone, StampCast Basket, 12 AWG Compression Terminals. Sealed and Vented Compatible. Product Overview The Rockford Fosgate Prime R2D2-10 is a 10" 2-Ohm Dual Voice Coil (DVC) subwoofer rated at 250W RMS the 2-Ohm variant of the R2 10" platform. The 2-Ohm DVC provides wiring options of 1-Ohm (parallel), 4-Ohm (series), or 2-Ohm per coil for bi-amplification. Optimised for both sealed and vented enclosures. Sold as an individual unit. Construction is consistent with the R2 platform: mica-injected polypropylene cone, anodized aluminium voice coil former, linear spider with embedded 16 AWG tinsel leads, StampCast basket with integrated spider venting, 12 AWG compression terminals, and integrated PVC trim ring. Key Specifications Subwoofer size: 10 inch Voice coil configuration: Dual Voice Coil (DVC) Impedance: 2-Ohm per coil (1-Ohm parallel / 4-Ohm series / 2-Ohm biamp) Power handling (RMS): 250W (confirmed) Peak power: Not specified — confirm with Rockford Fosgate Sensitivity: Not specified — confirm with Rockford Fosgate Frequency response: Not specified — confirm with Rockford Fosgate Xmax: Not specified — confirm with Rockford Fosgate Voice coil former: Anodized aluminium Cone: Mica-injected polypropylene Surround: Not specified — confirm with Rockford Fosgate Spider: Linear with embedded 16 AWG tinsel leads Basket: StampCast with integrated spider venting Input terminals: 12 AWG compression terminals ✓ Trim ring: Integrated PVC Enclosure compatibility: Sealed and vented ✓ Mounting depth: Not specified — confirm with Rockford Fosgate Cutout diameter: Not specified — confirm with Rockford Fosgate Sold as: Individual unit Weight: Not specified — confirm with Rockford Fosgate Warranty: Not specified — confirm with Rockford Fosgate Features & Benefits 250W RMS Power Handling — Confirmed 250W RMS. 2-Ohm DVC — Three Wiring Configurations: 1-Ohm (parallel): Both coils in parallel — confirm amplifier rated stable at 1-Ohm before use 4-Ohm (series): Both coils in series — broad amplifier compatibility 2-Ohm per coil (biamp): Each coil to a separate amplifier channel Mica-Injected Polypropylene Cone — Mica particles stiffen the polypropylene cone for reduced flex and more accurate bass reproduction, with polypropylene's moisture resistance. StampCast Basket with Integrated Spider Venting — Venting openings in the basket allow airflow around the spider to cool the motor during sustained operation — Rockford Fosgate notes this feature is "typically reserved for more expensive models." Anodized Aluminium Voice Coil Former — Anodizing increases the emissivity of the aluminium surface for improved heat radiation from the former. 12 AWG Compression Terminals — Heavier gauge and more secure than standard push terminals for a 250W installation. Linear Spider with Embedded 16 AWG Tinsel Leads — Consistent compliance across the excursion range; integrated leads reduce flex fatigue failure. Optimised for Sealed and Vented Enclosures — Both enclosure types confirmed. Technical Specs Specification Detail Brand Rockford Fosgate Part Number R2D2-10 Series Prime R2 Subwoofer Size 10 inch Voice Coil Dual Voice Coil (DVC) Impedance per Coil 2-Ohm ✓ Wiring Options 1-Ohm (parallel) / 4-Ohm (series) / 2-Ohm biamp ✓ Power Handling (RMS) 250W ✓ Peak Power Not specified Sensitivity Not specified Frequency Response Not specified Xmax Not specified Voice Coil Former Anodized Aluminium Cone Mica-Injected Polypropylene Surround Not specified Spider Linear, Embedded 16 AWG Tinsel Leads Basket StampCast with Integrated Spider Venting Input Terminals 12 AWG Compression ✓ Trim Ring Integrated PVC Enclosure Type Sealed and Vented ✓ Mounting Depth Not specified Cutout Diameter Not specified Sold As Individual Unit Weight Not specified Warranty Not specified — confirm with Rockford Fosgate Compatible With / Goes Well With Suitable enclosure types: Sealed — tight, accurate bass Vented — higher efficiency output Wiring: 1-Ohm → parallel (confirm amplifier stability) 4-Ohm → series 2-Ohm per coil → biamp Pairs well with: Rockford Fosgate T1000-1BDCP, T1500-1BDCP, or T2500-1BDCP mono amplifiers — confirm RMS at selected impedance Frequently Asked Questions What is the difference between the R2D2-10 and R2D4-10? Both are identical 10" Prime R2 subwoofers at 250W RMS with the same construction. The sole difference is impedance: R2D2-10 is 2-Ohm per coil (1-Ohm parallel / 4-Ohm series), R2D4-10 is 4-Ohm per coil (2-Ohm parallel / 8-Ohm series). Select based on your amplifier's stable impedance and preferred wiring configuration. What are the wiring options for the 2-Ohm DVC? 1-Ohm (parallel — confirm amplifier stability at 1-Ohm), 4-Ohm (series — broadly compatible), and 2-Ohm per coil for bi-amplification. Is the 1-Ohm parallel wiring safe? It is safe for the subwoofer. The amplifier must be confirmed rated stable at 1-Ohm — many amplifiers are not. Confirm before using the 1-Ohm configuration. What enclosure volume is recommended? Not confirmed in the supplier data. Pull the official Rockford Fosgate R2D2-10 datasheet for sealed and vented volume recommendations. What amplifier power is appropriate? 250W RMS at the selected wiring impedance. Confirm the amplifier's RMS output at 1-Ohm (parallel) or 4-Ohm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-500X1 Prime 500 Watt Mono Class-D Subwoofer Amplifier A 500W mono Class-D subwoofer amplifier rated at 500W x 1 at 2-ohm and 300W x 1 at 4-ohm (CTA-2006 rated). Features Continuously Variable Punch EQ with up to 18dB of bass boost at 45Hz, variable infrasonic filter, C.L.E.A.N. gain calibration, RCA pass-through outputs, RLC remote level control, Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management. Designed and engineered in Tempe, Arizona. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-500X1 is a 500W mono Class-D subwoofer amplifier from the Prime R2 series, designed for car audio builds requiring dedicated subwoofer amplification at a strong price-to-performance ratio. As a dedicated single-channel subwoofer amplifier, it operates across a frequency range of 20Hz-250Hz. Rated continuous power is 300W x 1 at 4-ohm and 500W x 1 at 2-ohm (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 350W at 4-ohm and 590W at 2-ohm. Unlike the R2-750X1 which is also 1-ohm stable, the R2-500X1 operates at 4-ohm or 2-ohm only. The Continuously Variable onboard Punch EQ delivers up to 18dB of boost at 45Hz. The variable infrasonic filter is tunable from 15Hz to 40Hz at 12dB/octave, providing flexible protection for different subwoofer drivers and enclosure types. RCA pass-through outputs allow the signal to be chained to a companion speaker amplifier. An RLC remote level control is included for in-cabin subwoofer volume adjustment. High-level inputs (450mV-12V) allow direct integration with OEM head units without RCA outputs. Auto-Sense turn-on activates the amplifier automatically when a signal is detected, with a bypass switch for vehicles with Retained Accessory Power (RAP) systems. C.L.E.A.N. input and output clip indicators guide precise gain calibration. Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management are all active. Cast aluminium heatsink with convection cooling. Designed and engineered in Tempe, Arizona. Features & Benefits 500W at 2-Ohm - High Output Mono Subwoofer Performance: The R2-500X1 delivers 500W RMS at 2-ohm (590W dynamic) and 300W RMS at 4-ohm, providing substantial subwoofer output for the Prime R2 price point. Continuously Variable Punch EQ - Up to 18dB at 45Hz: The onboard Punch EQ provides up to 18dB of continuously adjustable bass boost at 45Hz, allowing subwoofer output to be tuned to the acoustic characteristics of the installation without a separate equaliser. Variable Infrasonic Filter - 15Hz to 40Hz Tunable: The infrasonic filter is tunable from 15Hz to 40Hz at 12dB/octave, providing flexible and adjustable protection for different subwoofer drivers and enclosure types. RCA Pass-Through Outputs - Downstream Chaining: RCA pass-through outputs are active with both RCA and high-level input, allowing the signal to be passed to a downstream speaker amplifier such as the R2-500X4 without Y-cable noise or signal degradation. C.L.E.A.N. Technology - Precise Gain Calibration: C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) provides dedicated input and output clip indicator LEDs for precise gain calibration at setup, maximising output while minimising distortion. RLC Remote Level Control Included: An RLC remote level control is included for in-cabin subwoofer volume adjustment without returning to the amplifier. Rollback Protection and NOMAD Speaker Protection: Rollback Protection dynamically manages output during sustained high-output conditions to prevent thermal stress on the output devices. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vehicles with RAP systems. Technical Specs Specification Detail SKU R2-500X1 Number of Channels 1 (Monoblock) Total Power 500W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 300W x 1 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 500W x 1 Dynamic Power - 4-ohm (PowerCube) 350W x 1 Dynamic Power - 2-ohm (PowerCube) 590W x 1 Circuit Topology Class-D Bridgeable No Frequency Response 20 Hz - 250 Hz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input 2 x RCA / 4-Pin Molex High-Level Signal Output 2 x RCA Pass-Thru (active with RCA or High-Level input) Tone Controls Punch EQ: 0 to +18dB at 45Hz (Continuously Variable) Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Infrasonic Filter 15 Hz - 40 Hz at 12dB/Octave Butterworth (Variable) Remote Controls Yes (RLC Remote Level Control included) Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Cooling Convection Heatsink Cast Aluminium Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 80A Max Current Draw at 13.8V Sinewave 52A Visual Indicators Power: Blue / Protect: Red / C.L.E.A.N. In: Red / C.L.E.A.N. Out: Blue/Red Dimensions (H x W x D) 49 x 173 x 215mm (1.9 x 6.8 x 8.5 inch) CTA-2006 Compliant Yes Warranty 1 Year Compatible With / Goes Well With The R2-500X1 suits car audio builds requiring a dedicated mono subwoofer amplifier at the Prime R2 price point. Its RCA pass-through outputs pair naturally with the R2-500X4 4-channel speaker amplifier for a complete R2 series system. Goes Well With: R2-2X12 / R2-2X10 - Rockford Fosgate Prime dual loaded subwoofer enclosures, a matched Prime series pairing for the R2-500X1 at 2-ohm R2D2-12 / R2D2-10 - Prime R2 series individual subwoofers for custom enclosure builds R2-500X4 - Companion R2 series 4-channel speaker amplifier, chainable via the R2-500X1's RCA pass-through outputs R2-750X5 - Alternative single-unit R2 5-channel amplifier if a combined speaker and subwoofer solution is preferred RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the installation Frequently Asked Questions What is the difference between the R2-500X1 and the R2-750X1? Both are Prime R2 series mono Class-D subwoofer amplifiers with Punch EQ, variable infrasonic filter, RLC remote, and RCA pass-through. The key differences are maximum rated output and impedance stability. The R2-500X1 delivers 500W RMS at 2-ohm and 300W at 4-ohm, with no 1-ohm rating. The R2-750X1 delivers 750W RMS at 1-ohm, 500W at 2-ohm, and 250W at 4-ohm, adding 1-ohm stability for builds using a dual voice coil subwoofer wired to 1-ohm. The R2-500X1 also uses a smaller 80A fuse versus 120A on the R2-750X1. Choose the R2-500X1 for 2-ohm or 4-ohm subwoofer builds; choose the R2-750X1 for maximum output or 1-ohm stability. What impedance gives the most power from the R2-500X1? The R2-500X1 delivers maximum rated output at 2-ohm (500W RMS, 590W dynamic). At 4-ohm the rated output is 300W RMS. The R2-500X1 is not 1-ohm rated. For maximum output, pairing with a subwoofer or dual subwoofer configuration wired to a 2-ohm total load is recommended. Can the R2-500X1 be used with a factory OEM head unit? Yes. High-level inputs accept OEM head unit speaker outputs at 450mV-12V. Auto-Sense turn-on activates the amplifier automatically when a signal is detected on the high-level input, removing the need for a dedicated remote wire. A RAP bypass switch is also included. What fuse does the R2-500X1 require and is it included? The R2-500X1 requires an 80A fuse, which is not included and must be sourced separately. The maximum sinewave current draw is 52A. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Can I add a speaker amplifier to a system using the R2-500X1? Yes. The R2-500X1 includes RCA pass-through outputs that are active with both RCA and high-level input, allowing a clean signal to be passed to a downstream 4-channel speaker amplifier such as the R2-500X4. This is the recommended configuration for a complete R2 series car audio system.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-2X12 Prime Dual 12 Inch Sealed Loaded Subwoofer Enclosure A pre-built, pre-wired sealed enclosure loaded with two R2D2-12 12 inch dual voice coil subwoofers handling 500W RMS and 1000W peak, internally wired to a 2-ohm load. Constructed from 5/8 inch MDF with OEM-grade carpet covering and high current binding posts. Just add an amplifier for complete bass performance straight out of the box. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-2X12 is a complete sealed loaded subwoofer enclosure from the Prime R2 series, housing two R2D2-12 12 inch dual voice coil subwoofers in a pre-built, pre-wired cabinet ready for drop-in installation. The enclosure is internally wired to present a 2-ohm load at the amplifier terminals, removing the need for any internal wiring work at installation. The enclosure is constructed from 5/8 inch MDF (medium density fiberboard) for rigid, resonance-free cabinet walls, covered with OEM-grade carpet for a factory-quality finish. High current binding posts accept up to 12 AWG speaker wire for a secure, low-resistance connection. Both subwoofers carry CEA-2031 certified power handling and Klippel Verified certification, confirming the performance specifications are accurately measured and reproduced. The R2-2X12 is designed for straightforward amplifier pairing - connect a mono or 2-channel amplifier rated at 500W RMS at 2 ohms and the system is ready to perform. Features & Benefits Pre-Built, Pre-Wired - Drop-In Installation: The R2-2X12 arrives fully assembled and internally wired, presenting a 2-ohm load at the binding posts. No internal enclosure wiring or speaker installation is required. Connect an amplifier and the system is ready to use straight out of the box. Dual R2D2-12 12 Inch Subwoofers - 500W RMS Combined: Two R2D2-12 dual voice coil subwoofers handle a combined 500W RMS and 1000W peak, delivering powerful bass performance suited to a wide range of music styles and vehicle applications. Internally Wired to 2-Ohm Load: The enclosure is pre-wired to present a stable 2-ohm load at the amplifier binding posts, simplifying amplifier selection and ensuring optimal power transfer from a compatible 2-ohm stable monoblock or 2-channel amplifier. 5/8 Inch MDF Construction with OEM-Grade Carpet: The enclosure walls are built from 5/8 inch medium density fiberboard for a rigid, resonance-free cabinet, covered in OEM-grade carpet for a clean, factory-quality finish that suits most vehicle interiors. High Current Binding Posts - Up to 12 AWG: The high current binding posts accept speaker cable up to 12 AWG, providing a secure, low-resistance connection between the amplifier and the loaded enclosure. Klippel Verified and CEA-2031 Certified: Both subwoofers carry Klippel Verified certification, confirming that the measured performance specifications are accurately represented. CEA-2031 certified power handling ensures the rated wattage figures reflect real-world performance, not inflated marketing numbers. Technical Specs Specification Detail SKU R2-2X12 Enclosure Type Sealed Woofer Quantity 2 Woofer Size 12 inch Woofer Series R2D2-12 Nominal Impedance (each) 2 Ohm (dual voice coil) Amplifier Load 2 Ohm (internally pre-wired) Power Handling 500W RMS / 1000W Peak Enclosure Material 5/8 inch MDF Enclosure Finish OEM-Grade Carpet Speaker Connector High Current Binding Posts (up to 12 AWG) Dimensions (H x W x D) 365 x 865 x 450mm (14.37 x 34.06 x 12.51 inch) CEA-2031 Compliant Yes Certifications Klippel Verified Shipping Weight 19.4kg Warranty 1 Year Compatible With / Goes Well With The R2-2X12 suits a wide range of vehicle applications where a pre-built dual 12 inch sealed subwoofer enclosure can be accommodated in the boot or cargo area. The enclosure presents a 2-ohm load and is best paired with a monoblock amplifier rated at 500W RMS at 2 ohms, or a bridged 2-channel amplifier with equivalent 2-ohm stable output. Goes Well With: P1000X2 - Rockford Fosgate Prime 1000W 2-channel amplifier, bridgeable to mono for direct pairing with the R2-2X12 at 2 ohms P500X2 - Prime 500W 2-channel amplifier for a matched Prime series system build RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the amplifier installation alongside the R2-2X12 RFK8 - Rockford Fosgate 8 AWG amplifier wiring kit for lower power amplifier pairings Frequently Asked Questions Does the R2-2X12 require any internal wiring or speaker installation? No. The R2-2X12 arrives fully pre-built and pre-wired with both subwoofers already installed and internally connected to a 2-ohm load at the binding posts. All that is required at installation is connecting an external amplifier to the high current binding posts using speaker cable up to 12 AWG. What amplifier do I need for the R2-2X12? The R2-2X12 presents a 2-ohm load and handles 500W RMS combined. For best results, pair it with a monoblock amplifier rated at 500W RMS at 2 ohms, or a 2-channel amplifier that is 2-ohm stable when bridged to mono at equivalent power. Contact us if you need help selecting a compatible amplifier for your system. Why is the enclosure wired to 2 ohms? Each R2D2-12 subwoofer has a dual voice coil configuration. The two voice coils on each speaker can be wired in different combinations to achieve different impedances. In the R2-2X12, the internal wiring combines both subwoofers to present a single 2-ohm load at the binding posts, which is a common and efficient impedance for monoblock amplifiers to operate at. What are the enclosure dimensions and will it fit my vehicle? The R2-2X12 measures 365mm high x 865mm wide x 450mm deep (14.37 x 34.06 x 12.51 inches). It is recommended to measure your boot or cargo area carefully and compare against these dimensions before purchasing to confirm fitment in your specific vehicle. What is the difference between the R2-2X12 and building a custom dual subwoofer setup? The R2-2X12 eliminates the time and cost of sourcing a separate enclosure, installing subwoofers, and wiring the system manually. The pre-built sealed cabinet is constructed from 5/8 inch MDF with OEM-grade carpet and is calibrated for the R2D2-12 subwoofers, ensuring the enclosure volume and tuning are optimised for these specific drivers. A custom build can offer greater flexibility in shape and size, but the R2-2X12 delivers consistent, proven performance straight out of the box.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-2X10 Prime Dual 10 Inch Sealed Loaded Subwoofer Enclosure A pre-built, pre-wired sealed enclosure loaded with two R2D2-10 10 inch dual voice coil subwoofers handling 500W RMS and 1000W peak, internally wired to a 2-ohm load. Constructed from 5/8 inch MDF with OEM-grade carpet covering and high current binding posts. Just add an amplifier for complete bass performance straight out of the box. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-2X10 is a complete sealed loaded subwoofer enclosure from the Prime R2 series, housing two R2D2-10 10 inch dual voice coil subwoofers in a pre-built, pre-wired cabinet ready for drop-in installation. The enclosure is internally wired to present a 2-ohm load at the amplifier terminals, removing the need for any internal wiring work at installation. The enclosure is constructed from 5/8 inch MDF (medium density fiberboard) for rigid, resonance-free cabinet walls, covered with OEM-grade carpet for a factory-quality finish. High current binding posts accept up to 12 AWG speaker wire for a secure, low-resistance connection. Both subwoofers carry CEA-2031 certified power handling and Klippel Verified certification, confirming that the rated performance specifications are accurately measured and reproduced. The R2-2X10 is the more compact alternative to the R2-2X12, offering the same 500W RMS power handling in a smaller footprint suited to vehicles with tighter boot or cargo space constraints. Features & Benefits Pre-Built, Pre-Wired - Drop-In Installation: The R2-2X10 arrives fully assembled and internally wired, presenting a 2-ohm load at the binding posts. No internal enclosure wiring or speaker installation is required. Connect an amplifier and the system is ready to use straight out of the box. Dual R2D2-10 10 Inch Subwoofers - 500W RMS Combined: Two R2D2-10 dual voice coil subwoofers handle a combined 500W RMS and 1000W peak, delivering powerful bass performance in a more compact footprint than the dual 12 inch R2-2X12. Internally Wired to 2-Ohm Load: The enclosure is pre-wired to present a stable 2-ohm load at the amplifier binding posts, simplifying amplifier selection and ensuring optimal power transfer from a compatible 2-ohm stable monoblock or 2-channel amplifier. 5/8 Inch MDF Construction with OEM-Grade Carpet: The enclosure walls are built from 5/8 inch medium density fiberboard for a rigid, resonance-free cabinet, covered in OEM-grade carpet for a clean, factory-quality finish that suits most vehicle interiors. High Current Binding Posts - Up to 12 AWG: The high current binding posts accept speaker cable up to 12 AWG, providing a secure, low-resistance connection between the amplifier and the loaded enclosure. Klippel Verified and CEA-2031 Certified: Both subwoofers carry Klippel Verified certification, confirming that the measured performance specifications are accurately represented. CEA-2031 certified power handling ensures the rated wattage figures reflect real-world performance, not inflated marketing numbers. Technical Specs Specification Detail SKU R2-2X10 Enclosure Type Sealed Woofer Quantity 2 Woofer Size 10 inch Woofer Series R2D2-10 Nominal Impedance (each) 2 Ohm (dual voice coil) Amplifier Load 2 Ohm (internally pre-wired) Power Handling 500W RMS / 1000W Peak Enclosure Material 5/8 inch MDF Enclosure Finish OEM-Grade Carpet Speaker Connector High Current Binding Posts (up to 12 AWG) Dimensions (H x W x D) 310 x 765 x 308mm (12.20 x 30.12 x 12.11 inch) CEA-2031 Compliant Yes Certifications Klippel Verified Shipping Weight 16.5kg Warranty 1 Year Compatible With / Goes Well With The R2-2X10 suits a wide range of vehicle applications where a pre-built dual 10 inch sealed subwoofer enclosure can be accommodated in the boot or cargo area. At 310mm high x 765mm wide x 308mm deep, it is more compact than the R2-2X12 and is well suited to hatchbacks, sedans, and SUVs with tighter cargo space. The enclosure presents a 2-ohm load and is best paired with a monoblock amplifier rated at 500W RMS at 2 ohms, or a bridged 2-channel amplifier with equivalent 2-ohm stable output. Goes Well With: P1000X2 - Rockford Fosgate Prime 1000W 2-channel amplifier, bridgeable to mono for direct pairing with the R2-2X10 at 2 ohms P500X2 - Prime 500W 2-channel amplifier for a matched Prime series system build R2-2X12 - Larger dual 12 inch version of this enclosure for applications with more boot space and a desire for deeper bass extension RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the amplifier installation alongside the R2-2X10 RFK8 - Rockford Fosgate 8 AWG amplifier wiring kit for lower power amplifier pairings Frequently Asked Questions Does the R2-2X10 require any internal wiring or speaker installation? No. The R2-2X10 arrives fully pre-built and pre-wired with both subwoofers already installed and internally connected to a 2-ohm load at the binding posts. All that is required at installation is connecting an external amplifier to the high current binding posts using speaker cable up to 12 AWG. What amplifier do I need for the R2-2X10? The R2-2X10 presents a 2-ohm load and handles 500W RMS combined. For best results, pair it with a monoblock amplifier rated at 500W RMS at 2 ohms, or a 2-channel amplifier that is 2-ohm stable when bridged to mono at equivalent power. Contact us if you need help selecting a compatible amplifier for your system. What is the difference between the R2-2X10 and the R2-2X12? Both enclosures handle 500W RMS and use the same pre-built, pre-wired 2-ohm sealed cabinet design. The key differences are physical size and bass character. The R2-2X10 is more compact at 310 x 765 x 308mm and is better suited to vehicles with limited boot space. The R2-2X12 is larger at 365 x 865 x 450mm and delivers deeper bass extension due to the greater cone area of the 12 inch subwoofers. Choose the R2-2X10 for space-constrained installations, or the R2-2X12 if maximum bass depth is the priority. What are the enclosure dimensions and will it fit my vehicle? The R2-2X10 measures 310mm high x 765mm wide x 308mm deep (12.20 x 30.12 x 12.11 inches). It is recommended to measure your boot or cargo area carefully and compare against these dimensions before purchasing to confirm fitment in your specific vehicle. Why is the enclosure wired to 2 ohms and what amplifier impedance does that require? Each R2D2-10 subwoofer has a dual voice coil configuration. The internal wiring combines both subwoofers to present a single 2-ohm load at the binding posts. This is a common and efficient impedance for monoblock amplifiers to deliver their rated power. Ensure your chosen amplifier is rated as 2-ohm stable to get the full 500W RMS from this enclosure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-250X1 Prime 250 Watt Mono Class D Amplifier When your subwoofer demands dedicated power, the R2-250X1 delivers 250 watts of efficient Class D performance with the tuning tools to dial in every detail of your bass. Product Overview The R2-250X1 is part of Rockford Fosgate's 3rd generation Prime Series, developed for car audio enthusiasts who want a capable, no-compromise monoblock amplifier at an accessible price. Rated at 250 watts RMS into 2 ohms, it operates as a Class D monoblock designed specifically for subwoofer duty, with a frequency response limited to 20-250 Hz and a variable Low-Pass crossover to match any subwoofer configuration. Beyond raw power, the R2-250X1 comes equipped with an integrated Punch EQ for up to 18 dB of bass boost at 45 Hz, a variable Infrasonic Filter to protect the subwoofer from damaging low-frequency resonance, and an included RLC Remote Level Control for convenient bass adjustment from the driver's seat. MEHSA 4 thermal management and Rollback Protection ensure the amplifier stays reliable under sustained demand, while NOMAD actively monitors outputs against shorts and impedance faults. Designed and engineered in Tempe, Arizona, the R2-250X1 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, removing distortion before it reaches the subwoofer. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. Integrated Punch EQ: Continuously variable onboard bass equaliser providing 0 to +18 dB of boost at 45 Hz, correcting for acoustic deficiencies in the listening environment and delivering up to 3x the perceived bass without an external processor. Variable Infrasonic Filter: Adjustable high-pass filter operating from 15 to 40 Hz at 12 dB/octave Butterworth, removing subsonic frequencies that can damage a subwoofer's voice coil and excursion limits without contributing audible bass output. MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. Rollback Protection: During demanding musical conditions, the amplifier dynamically reduces power demand to prevent stress on output devices, preserving both the amplifier and the connected subwoofer under real-world listening conditions. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's speaker outputs and protects against shorted speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Includes RLC Remote Level Control: A remote level control is included in the box, allowing bass output to be adjusted from the driver's seat without accessing the amplifier directly. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing an additional amplifier to be added downstream without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-250X1 Series Prime Number of Channels 1 Amplifier Class Class D Total RMS Power 250W RMS Power @ 4 Ohm 150W x 1 RMS Power @ 2 Ohm 250W x 1 Dynamic Power @ 4 Ohm 209W x 1 Dynamic Power @ 2 Ohm 328W x 1 Bridgeable No Frequency Response 20 Hz - 250 Hz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input 2 x RCA low-level, 4-Pin Molex high-level Signal Output 2 x RCA pass-through (active with RCA or high-level input) Punch EQ 0 to +18 dB @ 45 Hz Low-Pass Crossover 50-250 Hz @ 12 dB/octave Butterworth Infrasonic Filter 15-40 Hz @ 12 dB/octave Butterworth Remote Controls Yes (RLC Remote Level Control included) Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) Operating Voltage 9-16V DC Recommended Fuse 50A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 8.1" (4.9 cm x 17.3 cm x 20.5 cm) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-250X1 pairs naturally with Rockford Fosgate Prime R1 and R2 subwoofers, including the R1S410, R1S412, R2SD2-12, and R2D2-12, giving it a matched system from a single brand. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for the speaker output. A quality pair of RCA interconnects is recommended for clean signal transfer from the head unit. For systems requiring additional channels for front and rear speakers, the R2-250X1 pairs directly with the R2-300X4 using the onboard RCA pass-through. Frequently Asked Questions What is the R2-250X1 designed for, and can it power full-range speakers? The R2-250X1 is a dedicated monoblock amplifier designed specifically for subwoofer applications. Its frequency response is limited to 20-250 Hz and its crossover controls are Low-Pass and Infrasonic only, making it unsuitable for powering full-range or component speakers. For full-range speaker channels, a separate 4-channel amplifier such as the R2-300X4 is required. What does the Infrasonic Filter do, and why is it important for a subwoofer? The variable Infrasonic Filter removes subsonic frequencies below 15-40 Hz (adjustable) that are inaudible to the human ear but cause excessive cone excursion in a subwoofer. Without this filter, ported subwoofer enclosures in particular can be damaged by these frequencies at high power. Setting the filter appropriately extends subwoofer lifespan and allows the amplifier to focus available power within the audible bass range. Does the R2-250X1 include a remote bass control, and how does it work? Yes. An RLC Remote Level Control is included in the box. It connects to the remote level control input on the amplifier and allows the driver to adjust bass output level from a convenient dash-mounted position without accessing the amplifier. This is particularly useful when the amplifier is installed in a boot or under a seat. What does Rollback Protection do? During sustained high-demand listening conditions, Rollback Protection dynamically reduces the amplifier's power output to prevent thermal stress on the output devices. Rather than shutting the amplifier down entirely, it maintains audio playback at a reduced level, protecting the amplifier and connected subwoofer while keeping the system running. What gauge wire is required, and is the fuse included? The R2-250X1 requires 4 AWG power and ground wire and 8 AWG speaker wire, both using the onboard compression terminal block connectors. The recommended 50A fuse is not included in the box and must be sourced separately. The fuse should be installed in the power cable as close to the battery as possible. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less