Roadvision BR8AR LED Clearance Light Red and Amber 10-30V An ADR-approved IP67 LED clearance lamp from the Roadvision BR8 Series, the BR8AR features 2 red and 2 amber LEDs with a red and amber polycarbonate lens and housing, 10-30V DC multi-volt operation, 74x38x22mm rectangle form factor, and a 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR8AR is a rectangle LED clearance lamp from the BR8 Series with a combined red and amber polycarbonate lens, suited to trailer, caravan, truck, and commercial vehicle clearance lighting where a dual-colour lens is required. Two red and two amber LEDs provide the distinctive red and amber appearance through a polycarbonate lens and housing rated to IP67. ADR approved and CTA certified (CTA-062090). Compatible with 10-30V DC systems. Pre-wired with a 300mm tinned copper cable with earth (white) and marker (brown) wires. Rated lifespan of 100,000 hours. Features & Benefits ADR Approved and CTA Certified: The BR8AR holds ADR approval and CTA certification CTA-062090, confirming compliance with Australian road requirements for clearance lamp applications. IP67 Waterproof and Dustproof: IP67 rating provides full dust and waterproof protection for exposed trailer and vehicle body mounting locations. Polycarbonate Red and Amber Lens and Housing: Unbreakable polycarbonate construction on both the red and amber lens and housing provides long-term durability and impact resistance. 2 Red and 2 Amber LEDs - 100,000 Hour Rated Lifespan: The dual-colour LED configuration of 2 red and 2 amber LEDs delivers the distinctive BR8AR appearance with a rated 100,000 hour lifespan. Multi-Volt 10-30V DC: Compatible with 12V and 24V vehicle and trailer electrical systems. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white) and marker (brown) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR8AR Brand Roadvision Series BR8 Description Clearance Lamp Rectangle Red and Amber Function Clearance LED Quantity 2 Red LEDs and 2 Amber LEDs Input Voltage 10-30V DC Current Draw 0.05A at 13.8V Dimensions 74mm x 38mm x 22mm Lens Construction Polycarbonate (Red and Amber) Housing Construction Polycarbonate Mounting Hole/Cutout 28.5mm and 50.8mm Cable Length 300mm Tinned Copper Wiring Earth - White, Marker - Brown IP Rating IP67 CTA Approval CTA-062090 ADR Approved Yes Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR8AR is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and CTA approved for on-road use. Confirm mounting cutout dimensions (28.5mm and 50.8mm) before purchase. Frequently Asked Questions Is the BR8AR ADR approved? Yes. The BR8AR is ADR approved and holds CTA approval CTA-062090 for clearance lamp applications. Is the BR8AR compatible with 24V systems? Yes. The BR8AR operates across 10-30V DC, compatible with both 12V and 24V systems. What is the difference between the BR8AR and the BR8R? The BR8R has a solid red lens with 4 red LEDs. The BR8AR has a dual red and amber lens with 2 red and 2 amber LEDs, providing the distinctive combined red and amber appearance for specific trailer and vehicle applications. What are the mounting cutout dimensions for the BR8AR? 28.5mm and 50.8mm. Confirm against your specific panel before purchase. What is the lifespan of the BR8AR? 100,000 hours.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RB112PY Revolver Low Profile LED Beacon Amber DIN Pole Mount A compact low-profile 360-degree high-intensity amber LED beacon from the Roadvision Revolver RB112 Series, the RB112PY features 32 SMD LEDs, 10 selectable flash patterns, IP67 waterproof and vibration-proof rating, aluminium housing with polycarbonate lens, 10-30V DC multi-volt operation, and DIN pole mount with integrated DIN plug, backed by a 5-year warranty. Product Overview The Roadvision RB112PY is a DIN pole mount LED beacon from the Revolver RB112 Series, engineered to meet and exceed Australian and international regulations for emergency and warning lighting. The compact 90 x 135mm body houses 32 SMD LEDs producing 28W of high-intensity amber light with a 100,000 hour rated lifespan and maintenance-free solid-state technology. Ten selectable flash patterns include single, double, triple, quad, and simulated rotating sequences across a range of flash rates, covering both ECE/SAE-compliant and rapid-response patterns. The RB112PY holds EMC Cispr25 Class 5 and SAE Class 1 approval. The aluminium housing and impact-resistant polycarbonate lens provide durability in demanding field and emergency vehicle applications. IP67 rated for waterproof and dustproof protection with vibration-proof construction. The DIN pole mount with integrated DIN plug provides a secure, standardised mounting solution compatible with existing DIN pole mount installations on trucks, forklifts, and industrial vehicles. Features & Benefits Compact 360-Degree High-Intensity LED Beacon: The RB112PY delivers 360-degree high-intensity amber light output from a compact low-profile body suited to DIN pole mount applications, providing maximum visibility from all directions. 32 SMD LEDs - 28W Output - 100,000 Hour Lifespan: Thirty-two SMD LEDs produce 28W of output with a rated lifespan of 100,000 hours, delivering maintenance-free performance over the long service life of emergency and industrial vehicle applications. 10 Selectable Flash Patterns: Ten selectable flash patterns cover a full range of single, double, triple, quad, and simulated rotating sequences at varying flash rates, allowing the RB112PY to be configured for the specific application and regulatory requirements. EMC Cispr25 Class 5 and SAE Class 1 Approved: The RB112PY holds EMC Cispr25 Class 5 and SAE Class 1 approvals, confirming compliance with electromagnetic compatibility and emergency vehicle lighting intensity requirements. Aluminium Housing with Impact-Resistant Polycarbonate Lens: The tough aluminium body and impact-resistant polycarbonate lens provide structural integrity and lens protection in demanding industrial and emergency vehicle environments. IP67 Waterproof and Vibration Proof: IP67 rating provides full dust and waterproof protection, and the vibration-proof construction ensures reliable operation on forklifts, heavy equipment, and rough terrain vehicles. Multi-Volt 10-30V DC with Low Current Draw: The 10-30V DC multi-volt input with a current draw of 1.9A at 13.8V makes the RB112PY compatible with both 12V and 24V vehicle electrical systems. DIN Pole Mount with Integrated DIN Plug: The DIN pole mount configuration with integrated DIN plug provides a standardised and secure mounting solution compatible with existing DIN pole mount points on trucks, forklifts, and industrial vehicles, enabling direct plug-in connection without additional wiring. 5-Year Warranty: The RB112PY is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RB112PY Brand Roadvision Series Revolver RB112 Description Low Profile Beacon LED 10-30V 10 Flash Patterns Amber DIN Pole Mount Function 10 Selectable Flash Patterns Light Source 32 SMD LEDs Power Output 28W Flash Patterns 10 Input Voltage 10-30V DC Current Draw 1.9A at 13.8V Dimensions 90mm x 135mm Mounting Type DIN Pole Mount Wiring DIN Plug Included in Pole Mount Lens Polycarbonate Housing Aluminium IP Rating IP67 Vibration Proof Yes Approvals EMC Cispr25 Class 5 and SAE Class 1 LED Lifespan 100,000 Hours Warranty 5 Years Flash Patterns Pattern Flash Rate Single (ECE/SAE) 480ms Single 800ms Double 400ms Double 800ms Triple 820ms Quad 820ms Front and Back Half 400ms Front and Back Half 800ms Rotated 800ms Rotated 400ms Compatible With The RB112PY is compatible with 10-30V DC vehicle electrical systems and standard DIN pole mount installations. EMC Cispr25 Class 5 and SAE Class 1 approved for on-road and industrial use. The RB112 Series is also available in fixed mount (RB112Y) and magnetic mount (RB112MY) configurations. Confirm DIN pole mount compatibility with your specific vehicle or equipment before purchase. Frequently Asked Questions What is a DIN pole mount and where is it used? A DIN pole mount is a standardised mounting system widely used on trucks, forklifts, and industrial vehicles. The DIN pole provides a secure and vibration-resistant mounting point for warning beacons. The RB112PY includes an integrated DIN plug in the pole mount for direct plug-in connection without additional wiring. Is the RB112PY SAE Class 1 approved? Yes. The RB112PY holds EMC Cispr25 Class 5 and SAE Class 1 approvals for on-road and industrial warning light applications. Is the RB112PY compatible with 24V vehicles? Yes. The RB112PY operates across 10-30V DC, making it compatible with both 12V and 24V vehicle and equipment electrical systems. What is the difference between the RB112PY and the RB112Y? Both share identical LED configuration, flash patterns, and electrical specifications. The RB112Y uses a 3-hole fixed mount with 103mm centre-to-centre spacing and measures 112 x 48mm. The RB112PY uses a DIN pole mount with integrated DIN plug and measures 90 x 135mm including the pole mount assembly. Choose the RB112PY for installations requiring DIN pole mount compatibility. Does the RB112PY require additional wiring for installation? No. The RB112PY includes an integrated DIN plug in the pole mount, allowing direct connection to compatible DIN pole mount points without additional wiring.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR8R LED Clearance Light Red 10-30V An ADR-approved IP67 LED clearance lamp from the Roadvision BR8 Series, the BR8R features 4 red LEDs, a polycarbonate lens and housing, 10-30V DC multi-volt operation, 74x38x22mm rectangle form factor, and a 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR8R is a rectangle LED clearance lamp from the BR8 Series with a red polycarbonate lens, designed for trailer, caravan, truck, and commercial vehicle clearance lighting. Four red LEDs with a polycarbonate lens and housing provide durable, maintenance-free clearance light output rated to 100,000 hours. IP67 rated, ADR approved, and CTA certified (CTA-062088). Compatible with 10-30V DC systems. Pre-wired with a 300mm tinned copper cable with earth (white) and marker (brown) wires. Features & Benefits ADR Approved and CTA Certified: The BR8R holds ADR approval and CTA certification CTA-062088, confirming compliance with Australian road requirements for clearance lamp applications. IP67 Waterproof and Dustproof: IP67 rating provides full dust and waterproof protection for exposed trailer and vehicle body mounting locations. Polycarbonate Lens and Housing: Unbreakable polycarbonate construction on both lens and housing provides long-term durability and impact resistance. 4 Red LEDs - 100,000 Hour Rated Lifespan: Four red LEDs deliver reliable clearance light output with a rated 100,000 hour lifespan for maintenance-free performance. Multi-Volt 10-30V DC: Compatible with 12V and 24V vehicle and trailer electrical systems. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white) and marker (brown) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR8R Brand Roadvision Series BR8 Description Clearance Lamp Rectangle Red Function Clearance LED Quantity 4 Red LEDs Input Voltage 10-30V DC Current Draw 0.05A at 13.8V Dimensions 74mm x 38mm x 22mm Lens Construction Polycarbonate Housing Construction Polycarbonate Mounting Hole/Cutout 28.5mm and 50.8mm Cable Length 300mm Tinned Copper Wiring Earth - White, Marker - Brown IP Rating IP67 CTA Approval CTA-062088 ADR Approved Yes Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR8R is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and CTA approved for on-road use. Confirm mounting cutout dimensions (28.5mm and 50.8mm) before purchase. Frequently Asked Questions Is the BR8R ADR approved? Yes. The BR8R is ADR approved and holds CTA approval CTA-062088 for clearance lamp applications. Is the BR8R compatible with 24V systems? Yes. The BR8R operates across 10-30V DC, compatible with both 12V and 24V systems. What is the difference between the BR8R and BR8A? The BR8R is a red lens clearance lamp only. The BR8A is an amber lens indicator and clearance lamp combining both functions. Both share the same dimensions, housing, and electrical specifications. What are the mounting cutout dimensions for the BR8R? 28.5mm and 50.8mm. Confirm against your specific panel before purchase. What is the lifespan of the BR8R? 100,000 hours.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RB112MY Revolver Low Profile LED Beacon Amber Magnetic Mount A compact low-profile 360-degree high-intensity amber LED beacon from the Roadvision Revolver RB112 Series, the RB112MY features 32 SMD LEDs, 10 selectable flash patterns, IP67 waterproof and vibration-proof rating, aluminium housing with polycarbonate lens, 10-30V DC multi-volt operation, and magnetic mount with a 2500mm lead and cigarette plug, backed by a 5-year warranty. Product Overview The Roadvision RB112MY is a magnetic mount LED beacon from the Revolver RB112 Series, engineered to meet and exceed Australian and international regulations for emergency and warning lighting. The compact 112 x 48mm low-profile body houses 32 SMD LEDs producing 28W of high-intensity amber light with a 100,000 hour rated lifespan and maintenance-free solid-state technology. Ten selectable flash patterns include single, double, triple, quad, and simulated rotating sequences across a range of flash rates, covering both ECE/SAE-compliant and rapid-response patterns. The RB112MY holds EMC Cispr25 Class 5 and SAE Class 1 approval. The aluminium housing and impact-resistant polycarbonate lens provide durability in tough industrial and emergency vehicle applications. IP67 rated for waterproof and dustproof protection with vibration-proof construction. The RB112MY is supplied with a 2500mm lead with cigarette plug for quick connect and disconnect from the vehicle power supply, making it suited to temporary and portable warning light applications. Features & Benefits Compact 360-Degree High-Intensity LED Beacon: The RB112MY delivers 360-degree high-intensity amber light output from a compact 112 x 48mm low-profile body, providing maximum visibility from all directions without the bulk of larger beacon units. 32 SMD LEDs - 28W Output - 100,000 Hour Lifespan: Thirty-two SMD LEDs produce 28W of output with a rated lifespan of 100,000 hours, delivering maintenance-free performance over the long service life typical of emergency and industrial vehicle applications. 10 Selectable Flash Patterns: Ten selectable flash patterns cover a full range of single, double, triple, quad, and simulated rotating sequences at varying flash rates, allowing the RB112MY to be configured for the specific application and regulatory requirements. EMC Cispr25 Class 5 and SAE Class 1 Approved: The RB112MY holds EMC Cispr25 Class 5 and SAE Class 1 approvals, confirming compliance with electromagnetic compatibility and emergency vehicle lighting intensity requirements for on-road and industrial use. Aluminium Housing with Impact-Resistant Polycarbonate Lens: The tough aluminium body and impact-resistant polycarbonate lens provide structural integrity and lens protection in demanding field, construction, and emergency vehicle environments. IP67 Waterproof and Vibration Proof: IP67 rating provides full dust and waterproof protection, and the vibration-proof construction ensures reliable operation on rough terrain and heavy equipment applications. Multi-Volt 10-30V DC with Low Current Draw: The 10-30V DC multi-volt input with a current draw of 1.9A at 13.8V makes the RB112MY compatible with both 12V and 24V vehicle electrical systems. Magnetic Mount for Temporary and Portable Applications: The strong magnetic base allows the RB112MY to be quickly and securely mounted to any ferrous metal vehicle roof or panel surface, making it ideal for temporary and portable warning light applications where permanent mounting is not required. 2500mm Lead with Cigarette Plug: The 2500mm lead with cigarette plug allows the RB112MY to be powered directly from a vehicle cigarette lighter socket, enabling fast deployment without requiring permanent wiring. 5-Year Warranty: The RB112MY is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RB112MY Brand Roadvision Series Revolver RB112 Description Low Profile Beacon LED 10-30V 10 Flash Patterns Amber Magnetic Mount Function 10 Selectable Flash Patterns Light Source 32 SMD LEDs Power Output 28W Flash Patterns 10 Input Voltage 10-30V DC Current Draw 1.9A at 13.8V Dimensions 112mm x 48mm Mounting Type Magnetic Mount Wiring 2500mm Lead with Cigarette Plug Lens Polycarbonate Housing Aluminium IP Rating IP67 Vibration Proof Yes Approvals EMC Cispr25 Class 5 and SAE Class 1 LED Lifespan 100,000 Hours Warranty 5 Years Flash Patterns Pattern Flash Rate Single (ECE/SAE) 480ms Single 800ms Double 400ms Double 800ms Triple 820ms Quad 820ms Front and Back Half 400ms Front and Back Half 800ms Rotated 800ms Rotated 400ms Compatible With The RB112MY is compatible with 10-30V DC vehicle electrical systems. The 2500mm cigarette plug lead allows direct connection to a vehicle cigarette lighter socket. EMC Cispr25 Class 5 and SAE Class 1 approved for on-road and industrial use. The RB112 Series is also available in fixed mount (RB112Y) and DIN pole mount (RB112PY) configurations. Frequently Asked Questions What is the advantage of the magnetic mount on the RB112MY? The magnetic base allows the RB112MY to be quickly mounted to and removed from any ferrous metal vehicle roof or panel surface without tools or permanent installation. This makes it ideal for temporary warning light applications, hire fleets, and situations where the beacon needs to be transferred between vehicles. How long is the lead on the RB112MY? The RB112MY is supplied with a 2500mm lead with cigarette plug, allowing direct connection to a vehicle cigarette lighter socket for quick deployment. Is the RB112MY SAE Class 1 approved? Yes. The RB112MY holds EMC Cispr25 Class 5 and SAE Class 1 approvals for on-road and industrial warning light applications. Is the RB112MY compatible with 24V vehicles? Yes. The RB112MY operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the difference between the RB112MY and the RB112Y? Both are identical in LED configuration, flash patterns, housing, and electrical specifications. The RB112Y uses a 3-hole fixed mount with 103mm centre-to-centre spacing and a 300mm sheathed cable for permanent installation. The RB112MY uses a magnetic mount with a 2500mm cigarette plug lead for temporary or portable applications.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL4840FFM Stealth LED Work Light 40W Flood Flush Mount A flush mount square LED work light from the Roadvision Stealth RWL48 Series, the RWL4840FFM produces up to 3016 lumens from 4 x 9W Osram LEDs through a 110-degree flood beam, with 10-30V DC multi-volt input, die-cast aluminium housing, polycarbonate lens, an 82 x 75mm panel cut-out, 2-pin Deutsch plug wiring, and a 5-year warranty. Product Overview The Roadvision RWL4840FFM is the flush mount version of the Stealth RWL48 Series 40W square work light, designed to sit neatly into bull bars, rear bars, canopies, and body panels via an 82 x 75mm cut-out. The smoked-look lens and blackout mounting hardware give a stealth on-vehicle look, and the 122 x 89 x 72mm flush mount body suits demanding environments and applications where space is limited. Four 9W Osram LEDs produce up to 3016 maximum lumens of super white light close to daylight, spread across a 110-degree flood beam pattern that delivers 65 lux at 10 metres and reaches 81 metres at 1 lux. The RWL4840FFM is equipped with thermal management technology that smart-adjusts to the environmental temperature to balance optimal performance and prevent overheating. The multi-volt 10-30V DC input draws a super low 1.4 to 3.3 amps at 13.8V, and solid-state technology delivers a 50,000 hour LED lifespan. Installation is a simple 2-wire connection via the 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Features & Benefits Flush Mount Design - 82 x 75mm Cut-Out: The RWL4840FFM mounts flush into panels via an 82 x 75mm cut-out, providing a clean, integrated installation into bull bars, rear bars, canopies, and vehicle bodywork. 40W Square Flood Beam - Up to 3016 Lumens: The RWL4840FFM produces up to 3016 maximum lumens through a 110-degree flood beam pattern, delivering 65 lux at 10 metres and a maximum distance of 81 metres at 1 lux for broad, even work area coverage. 4 x 9W Osram LEDs: Four 9W Osram LEDs produce super white light close to daylight, improving visibility and reducing eye strain during night work compared to warmer light sources. Stealth Smoked-Look Lens and Blackout Hardware: The Stealth RWL48 Series features a smoked-look lens and blackout mounting hardware for a low-key, integrated on-vehicle appearance. 50,000 Hour LED Lifespan: Solid-state technology delivers a 50,000 hour LED lifespan for maintenance-free performance over the long service life typical of 4WD, work vehicle, and machinery applications. Thermal Management Technology: The RWL4840FFM smart-adjusts to the environmental temperature, balancing optimal light performance with overheating prevention in demanding conditions. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight, tough die-cast aluminium housing and polycarbonate lens provide durability in the most demanding environments. Multi-Volt 10-30V DC with Super Low Current Draw: The 10-30V DC multi-volt input draws just 1.4 to 3.3 amps at 13.8V, making the RWL4840FFM compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. Simple 2-Wire Installation with Deutsch Plug: The 2-pin Deutsch plug and simple 2-wire installation make for a quick, professional connection to the vehicle wiring. Built-In Circuit Protection: Over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval protect both the lamp and the vehicle's electrical and communication equipment. 5-Year Warranty: The RWL4840FFM is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL4840FFM Brand Roadvision Series Stealth RWL48 Description LED Work Light 10-30V Square 40W Flood Beam Flush Mount Beam Pattern 110° Flood Maximum Lumens 3016lm Maximum Watts 40W Light Source 4 x 9W Osram LEDs Input Voltage 10-30V DC Current Draw 1.4-3.3A at 13.8V Maximum Lux at 10m 65LX Maximum Distance at 1 Lux 81m Lens Polycarbonate Housing Die-Cast Aluminium Mounting Type Flush Mount Cut Out 82 x 75mm Wiring 2 Pin Deutsch Plug Dimensions 122 x 89 x 72mm LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL4840FFM is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles. The Stealth RWL48 Series is also available as a standard 40W surface mount (RWL4840F) and a compact 23W flood beam (RWL4823F). Confirm the 82 x 75mm cut-out dimensions and rear panel clearance before purchase. A cut-out template is available from Roadvision. Frequently Asked Questions What size cut-out does the RWL4840FFM require? The RWL4840FFM requires an 82 x 75mm panel cut-out for flush mounting, with overall dimensions of 122 x 89 x 72mm. Roadvision provides a cut-out template for accurate installation. How bright is the RWL4840FFM? The RWL4840FFM produces up to 3016 maximum lumens from 4 x 9W Osram LEDs, delivering 65 lux at 10 metres and a maximum distance of 81 metres at 1 lux through a 110-degree flood beam. Is the RWL4840FFM compatible with 24V vehicles? Yes. The RWL4840FFM operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the difference between the RWL4840FFM and RWL4840F? Both share the same 40W output, 3016 lumens, and 110-degree flood beam. The RWL4840FFM is the flush mount version requiring an 82 x 75mm panel cut-out, while the RWL4840F is the standard surface mount version measuring 81 x 82 x 67mm. How does the RWL4840FFM connect to the vehicle? The RWL4840FFM uses a 2-pin Deutsch plug with simple 2-wire installation, and includes over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL6701SD Stealth PRO 7" LED Driving Light 68W Spot Beam A 7" 68W spot beam LED driving light from the Roadvision Stealth PRO Series, the RDL6701SD delivers 5,130 lumens per light (10,260lm per pair) with a beam distance of 631 metres at 1 lux per light (892m per pair), powered by 16 x 3W Osram LEDs in a die-cast aluminium housing with polycarbonate lens, featuring dynamic start-up DRL, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RDL6701SD is a 7" round spot beam driving light from the Stealth PRO Series, featuring a contemporary bezel-less design with a black cover and dedicated DRL window housing a dynamic start-up Daytime Running Light. The DRL seamlessly darkens when not illuminated for a clean, understated appearance when the driving lights are off. Blackout mounting hardware maintains the stealth aesthetic. Sixteen 3W Osram LEDs produce 68W of super-white light close to daylight with a 50,000 hour LED lifespan via solid-state technology. Roadvision's Thermal Management Technology ensures superior performance and durability across all operating environments. The die-cast aluminium housing is lightweight and tough, and the polycarbonate lens provides durable impact resistance. IP68 and IP69K protection covers both sustained immersion and high-pressure water jet exposure. Multi-volt 10-30V DC input with over/under voltage and reverse polarity protection, and simple 2-wire installation via a 2-pin Deutsch plug. EMI/EMC radio interference approved. Features & Benefits 5,130 Lumens per Light - 631 Metre Beam at 1 Lux: The RDL6701SD delivers 5,130lm per light (10,260lm per pair) with a maximum beam distance of 631 metres at 1 lux per light (892m per pair), providing exceptional long-range illumination for night driving in remote and off-road environments. 16 x 3W Osram LEDs - Super White Daylight-Close Output: Sixteen 3W Osram LEDs produce a super-white light output close to daylight colour temperature, providing natural and accurate colour rendering on the road surface and surrounding environment. Dynamic Start-Up DRL with Black Cover and DRL Window: The Stealth PRO Series features a dynamic start-up Daytime Running Light with a dedicated DRL window in the black cover. The DRL seamlessly darkens when not illuminated, maintaining the sleek bezel-less appearance of the light when the DRL is off. Blackout Mounting Hardware: All mounting hardware is finished in black, complementing the stealth aesthetic of the RDL6701SD and providing a professional, factory-consistent appearance on the vehicle. Roadvision Thermal Management Technology: The integrated Thermal Management Technology actively manages heat dissipation from the LED array and driver electronics, ensuring consistent output and long-term reliability across a wide range of operating temperatures and sustained high-power use. IP68 and IP69K Protection: The RDL6701SD holds both IP68 (sustained submersion) and IP69K (high-pressure, high-temperature water jet) protection ratings, providing the highest level of ingress protection for off-road, agricultural, and marine vehicle applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and efficient heat transfer, while the polycarbonate lens resists impact and UV degradation in outdoor environments. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated LED lifespan with maintenance-free solid-state technology provides long-term reliability without the bulb replacement requirements of halogen or HID driving lights. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: The 10-30V DC multi-volt input is compatible with both 12V and 24V vehicle electrical systems. Over/under voltage and reverse polarity protection safeguard the electronics from wiring errors and voltage fluctuations. Simple 2-Wire Installation via 2-Pin Deutsch Plug: The 2-pin Deutsch plug provides a secure, weatherproof, and vibration-resistant connection for the driving light circuit, with red (positive) and black (negative) wires. The DRL halo connects via the separate green wire positive. EMI/EMC Radio Interference Approved: The RDL6701SD is EMI/EMC radio interference approved, confirming it will not interfere with vehicle communication systems, navigation, or other electronic equipment. 7-Year Warranty: The RDL6701SD is backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL6701SD Brand Roadvision Series Stealth PRO Description 7" LED Driving Light 10-30V Round 68W Spot Beam Beam Pattern Spot Maximum Lumens per Light 5,130lm Maximum Lumens per Pair 10,260lm Maximum Lux at 10m per Light 3,978lx Maximum Lux at 10m per Pair 7,956lx Maximum Beam Distance at 1lx per Light 631m Maximum Beam Distance at 1lx per Pair 892m Input Voltage 10-30V DC Maximum Watts 68W LED Quantity 16 x 3W Osram Current Draw 4.95A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring - Driving Light 2-Pin Deutsch Plug (Red +Ve, Black -Ve) Wiring - DRL Halo Green Wire +Ve Dimensions 192mm x 78mm x 195mm IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Warranty 7 Years Compatible With The RDL6701SD is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The 2-pin Deutsch plug provides a secure weatherproof connection for the driving light circuit. The DRL halo connects separately via the green wire positive. Confirm mounting clearance and wiring loom compatibility for your specific vehicle before purchase. Sold individually; pair pricing refers to two units. Frequently Asked Questions Are the RDL6701SD driving lights sold individually or as a pair? The RDL6701SD is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. Confirm the quantity required for your installation before purchase. What is the dynamic start-up DRL on the Stealth PRO Series? The dynamic start-up DRL provides an animated light sequence when the DRL activates, drawing attention to the vehicle during daylight hours. The DRL is housed in a dedicated window in the black cover and seamlessly darkens when not in use, maintaining the sleek bezel-less appearance of the light. Is the RDL6701SD compatible with 24V vehicles? Yes. The RDL6701SD operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems including trucks and heavy commercial vehicles. What does IP68 and IP69K mean for the RDL6701SD? IP68 confirms the light is protected against sustained submersion in water beyond 1 metre. IP69K confirms protection against high-pressure, high-temperature water jet exposure from all angles. Together these ratings provide the highest available level of ingress protection, suited to off-road, agricultural, and marine vehicle applications including vehicle wash-down. What wiring connection does the RDL6701SD use? The driving light circuit uses a 2-pin Deutsch plug with red (positive) and black (negative) wires. The DRL halo connects separately via a green positive wire. Deutsch connectors are widely used in automotive and off-road applications for their secure, weatherproof, and vibration-resistant connection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL1120FFM LED Work Light 20W Flood Beam Flush Mount 526lm 9-36V A compact 20W flood beam flush mount LED work light from the Roadvision RWL1120 Series, the RWL1120FFM delivers 526 lumens from 2 x 10W LEDs with a beam distance of 60 metres at 1 lux, in a lightweight die-cast aluminium housing with polycarbonate lens, 9-36V DC multi-volt input, 2-pin Deutsch plug, and a 72 x 50mm panel cutout for flush installation, backed by a 5-year warranty. Product Overview The Roadvision RWL1120FFM is a rectangle flush mount LED work light from the RWL1120 Series, sharing the same LED array, output, beam pattern, and electrical specifications as the surface mount RWL1120F but designed for flush panel installation via a 72 x 50mm cutout. Two 10W LEDs produce 526 lumens of super-white flood beam light close to daylight colour temperature, with 29 lux at 6 metres and a beam reach of 60 metres at 1 lux. The 109 x 59 x 55mm die-cast aluminium housing with polycarbonate lens provides durability and effective heat management. Multi-volt 9-36V DC input at 1.4A at 13.8V, over/under voltage and reverse polarity protection, EMI/EMC radio interference approval, and 2-pin Deutsch plug for simple 2-wire installation. Backed by a 5-year warranty. Features & Benefits 526 Lumens Flood Beam - 60 Metres at 1 Lux: The RWL1120FFM delivers 526 lumens of flood beam output with 29 lux at 6 metres and a beam reach of 60 metres at 1 lux, providing broad area illumination suited to flush-mounted work lighting applications. 2 x 10W LEDs - Super White Daylight-Close Output: Two 10W LEDs produce a super-white output close to daylight colour temperature for accurate colour rendering and clear visibility during work operations. Flush Mount Design with 72 x 50mm Panel Cutout: The RWL1120FFM is designed for flush panel installation via a 72 x 50mm cutout, providing a clean, recessed appearance suited to toolboxes, service bodies, and vehicle panels where a flush finish is preferred. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing at 109 x 59 x 55mm provides structural rigidity and effective heat dissipation, while the polycarbonate lens resists impact and UV degradation. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated lifespan with maintenance-free solid-state technology provides long-term reliability. Multi-Volt 9-36V DC with Low Current Draw: Compatible with 12V, 24V, and 36V electrical systems at 1.4A at 13.8V. Over/Under Voltage and Reverse Polarity Protection: Electronic protection safeguards the LED driver from voltage fluctuations and wiring errors. EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication and electronic systems without interference. 2-Pin Deutsch Plug for Simple 2-Wire Installation: Secure, weatherproof, and vibration-resistant 2-wire connection. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL1120FFM Brand Roadvision Series RWL1120 Description LED Work Light 9-36V Rectangle 20W Flood Beam Flush Mount Beam Type Flood Beam Maximum Lumens 526lm Total Watts 20W Light Source 2 x 10W LEDs Input Voltage 9-36V DC Current Draw 1.4A at 13.8V DC Lux at 6m 29 Lux Beam Distance at 1 Lux 60m Dimensions 109mm x 59mm x 55mm Mount Type Flush Mount Cutout Required 72mm x 50mm Wiring 2-Pin Deutsch Plug Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL1120FFM is compatible with 9-36V DC electrical systems including 12V, 24V, and 36V vehicle and equipment platforms. Requires a 72 x 50mm panel cutout for flush installation. The 2-pin Deutsch plug provides a secure weatherproof 2-wire connection. A surface mount version without cutout requirement is available as the RWL1120F. Frequently Asked Questions What size panel cutout does the RWL1120FFM require? The RWL1120FFM requires a 72 x 50mm panel cutout for flush installation. Confirm the cutout dimensions are achievable in your specific panel or surface before purchase. What is the difference between the RWL1120FFM and the RWL1120F? Both share identical LED configuration, output, beam pattern, and electrical specifications. The RWL1120F is a surface mount unit measuring 71 x 62 x 55mm requiring no cutout. The RWL1120FFM is a flush mount unit measuring 109 x 59 x 55mm requiring a 72 x 50mm panel cutout for a recessed installation finish. Choose based on the installation surface and preferred mounting style. Is the RWL1120FFM compatible with 24V vehicles? Yes. The RWL1120FFM operates across 9-36V DC, making it compatible with 12V, 24V, and 36V electrical systems. What is the beam pattern of the RWL1120FFM? The RWL1120FFM produces a flood beam pattern delivering 526 lumens with 29 lux at 6 metres and a beam reach of 60 metres at 1 lux. What is the rated LED lifespan of the RWL1120FFM? The RWL1120FFM has a rated LED lifespan of 50,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RB1552Y Revolver LED Beacon Amber 5 Flash Patterns Fixed Mount A 360-degree high-intensity amber LED beacon from the Roadvision Revolver RB1552 Series, the RB1552Y features 32 SMD LEDs producing 28W, 5 selectable flash patterns, IP67 weatherproof and vibration-proof rating, polycarbonate lens and housing, 10-30V DC multi-volt operation, and a 3-hole multi-fit fixed mount with 8 possible mounting configurations, backed by a 5-year warranty. Product Overview The Roadvision RB1552Y is a fixed mount LED beacon from the Revolver RB1552 Series, engineered to meet and exceed Australian and international regulations for emergency and warning lighting across on-highway, mining, and industrial applications. The 166 x 150mm body houses 32 SMD LEDs producing 28W of high-intensity amber light with a 100,000 hour rated lifespan and maintenance-free solid-state technology. Five selectable flash patterns include single, double, triple, quad, and simulated rotating at 140rpm. The RB1552Y holds EMC CISPR25 Class 5 and SAE Class 1 approval. The polycarbonate lens and housing provide IP67 waterproof and dustproof protection with vibration-proof construction suited to the harshest Australian conditions. Multi-volt 10-30V DC input makes it compatible with 12V and 24V vehicle systems. The multi-fit fixed mount features 8 possible 3-hole mounting configurations at 120-degree intervals between 113mm and 152.5mm diameter, with 4.5mm mounting holes. Pre-wired with a 300mm sheathed cable. Operating temperature range is -40°C to +65°C. Features & Benefits 360-Degree High-Intensity LED Beacon: The RB1552Y delivers 360-degree high-intensity amber light output from a compact 166 x 150mm body, providing maximum visibility from all directions for on-highway, mining, and industrial vehicle applications. 32 SMD LEDs - 28W Output - 100,000 Hour Lifespan: Thirty-two SMD LEDs produce 28W of output at only 2.7A at 13.8V, with a rated lifespan of 100,000 hours and maintenance-free solid-state technology for long-term reliability. 5 Selectable Flash Patterns Including Simulated Rotating: Five selectable flash patterns cover single, double, triple, quad, and simulated rotating at 140rpm, providing flexibility across a wide range of application and regulatory requirements. EMC CISPR25 Class 5 and SAE Class 1 Approved: The RB1552Y holds EMC CISPR25 Class 5 and SAE Class 1 approvals, confirming compliance with electromagnetic compatibility and emergency vehicle lighting intensity requirements. Polycarbonate Lens and Housing - IP67 Rated: High-impact polycarbonate construction on both lens and housing provides IP67 waterproof and dustproof protection with vibration-proof construction suited to demanding on-highway, mining, and industrial environments. Multi-Fit 3-Hole Fixed Mount with 8 Mounting Configurations: The multi-fit fixed mount provides 8 possible 3-hole mounting configurations at 120-degree intervals between 113mm and 152.5mm centre-to-centre diameter, with 4.5mm mounting holes, accommodating a wide range of vehicle roof and panel mounting point configurations. Multi-Volt 10-30V DC with Low Current Draw: The 10-30V DC multi-volt input with a current draw of 2.7A at 13.8V makes the RB1552Y compatible with both 12V and 24V vehicle electrical systems, and is particularly suited to on-highway applications where voltage drop may be a concern. 300mm Sheathed Pre-Wired Cable: The 300mm sheathed pre-wired cable provides a protected wiring connection between the beacon and the vehicle wiring harness. Wide Operating Temperature Range: The RB1552Y operates reliably across a temperature range of -40°C to +65°C, suited to the extremes of Australian climate conditions. 5-Year Warranty: The RB1552Y is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RB1552Y Brand Roadvision Series Revolver RB1552 Description Beacon LED 10-30V 5 Flash Patterns Amber Fixed Mount Function 5 Selectable Flash Patterns Light Source 32 SMD LEDs Power Output 28W Flash Patterns 5 Input Voltage 10-30V DC Current Draw 2.7A at 13.8V Dimensions 166mm x 150mm Mounting Type 3-Hole Multi-Fit Fixed Mount Mounting Configurations 8 configurations at 120-degree intervals (113mm to 152.5mm diameter) Mounting Hole Diameter 4.5mm Wiring 300mm Sheathed Lens Construction Polycarbonate Housing Construction Polycarbonate IP Rating IP67 Vibration Proof Yes Operating Temperature -40°C to +65°C Approvals EMC CISPR25 Class 5 and SAE Class 1 LED Lifespan 100,000 Hours Warranty 5 Years Flash Patterns Pattern Single Double Triple Quad Simulated Rotating (140rpm) Compatible With The RB1552Y is compatible with 10-30V DC vehicle electrical systems. EMC CISPR25 Class 5 and SAE Class 1 approved for on-road and industrial use. The RB1552 Series is also available in magnetic mount (RB1552MY) and DIN pole mount (RB1552PY) configurations. Confirm mounting hole configuration requirements for your specific vehicle or equipment before purchase. Frequently Asked Questions How many mounting configurations does the RB1552Y multi-fit mount provide? The RB1552Y multi-fit fixed mount provides 8 possible 3-hole mounting configurations at 120-degree intervals between 113mm and 152.5mm centre-to-centre diameter with 4.5mm mounting holes, accommodating a wide range of vehicle roof and panel mounting point configurations. How many flash patterns does the RB1552Y have? The RB1552Y has 5 selectable flash patterns: single, double, triple, quad, and simulated rotating at 140rpm. Is the RB1552Y SAE Class 1 approved? Yes. The RB1552Y holds EMC CISPR25 Class 5 and SAE Class 1 approvals for on-road and industrial warning light applications. Is the RB1552Y compatible with 24V vehicles? Yes. The RB1552Y operates across 10-30V DC, making it compatible with both 12V and 24V vehicle and equipment electrical systems. What is the rated lifespan of the RB1552Y LEDs? The RB1552Y has a rated LED lifespan of 100,000 hours, providing long-term maintenance-free performance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR208LR LED Stop Tail Indicator Lamp Twin Pack 12V A twin pack of compact square LED rear combination lamps from the Roadvision BR208 Series, the BR208LR combines stop, tail, and indicator functions with an integrated reflector, 12V DC input, sealed polycarbonate lens and housing, submersible water and dust proof construction, 100,000 hour rated LED lifespan, ADR/ECE approval for all functions, and a 5-year warranty. Product Overview The Roadvision BR208LR is a simple DIY trailer lighting kit from the BR208 Series, designed for the budget conscious consumer while delivering the durability of maintenance-free LED technology and greater visibility for increased safety. Each compact 100 x 100 x 21mm lamp combines stop/tail and indicator functions with an integrated reflector, producing more light output than incandescent lamps while drawing a fraction of the current, with the indicator drawing just 0.09A and the stop/tail 0.09/0.02A at 13.8V. Constructed with a sealed polycarbonate lens and housing, the BR208LR is water and dust proof to a submersible standard and totally maintenance free, with a 100,000 hour rated LED lifespan from solid-state technology. Fitment is made easy with integrated twin mounting studs at 70mm centres, stainless steel hardware, and a pre-wired 300mm sheathed tinned copper cable. All functions are ADR/ECE approved. With Roadvision it's fit and forget. Features & Benefits Twin Pack DIY Trailer Lighting Kit: The BR208LR includes two compact LED combination lamps, covering both sides of a trailer in a single purchase with a simple DIY-friendly installation. Stop, Tail, and Indicator with Integrated Reflector: Each lamp combines stop/tail and indicator functions with an integrated reflector, reducing the number of separate lamps and reflectors needed on the rear of the trailer. More Light, Less Current: The BR208 Series produces more light output than incandescent lamps while drawing a fraction of the current, with 5 indicator LEDs and 5 stop/tail LEDs drawing as little as 0.02A in tail mode at 13.8V. 100,000 Hour Rated LED Lifespan: Solid-state LED technology delivers a 100,000 hour rated lifespan for totally maintenance-free operation over the life of the trailer. Water and Dust Proof - Submersible: The sealed polycarbonate lens and housing are water and dust proof to a submersible standard, suited to boat trailers and trailers that regularly see water crossings and wet conditions. ADR/ECE Approved for All Functions: The indicator, stop/tail, and reflector functions are all ADR/ECE approved for legal on-road use in Australia. Easy Twin Stud Surface Mount Installation: Integrated twin mounting studs at 70mm centres with stainless steel hardware make for a secure, corrosion-resistant surface mount installation. Pre-Wired 300mm Sheathed Cable: Each lamp is pre-wired with a 300mm sheathed tinned copper cable, with colour-coded wiring for a straightforward connection to the trailer harness. 5-Year Warranty: The BR208LR is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR208LR Brand Roadvision Series BR208 Description Square Stop/Tail/Ind/Ref Twin Pack Functions Stop/Tail and Indicator with Integrated Reflector Voltage Input 12V DC Number of LEDs Indicator - 5 LEDs, Stop/Tail - 5 LEDs Current Draw Indicator - 0.09A at 13.8V, Stop/Tail - 0.09/0.02A at 13.8V Dimensions 100 x 100 x 21mm Lens Polycarbonate Housing Polycarbonate Ingress Protection Water and Dust Proof (Submersible) Mounting Twin Stud Surface Mount, 70mm Stud Centres, Stainless Steel Hardware Cable 300mm Sheathed Tinned Copper Wiring Colour Codes Earth - White, Stop - Red, Rail - Brown, Indicator - Green or Yellow ADR Approval Indicator - E4-6R-0116003, Stop/Tail - E4-7R-0216003, Reflector - E4-3R-0216003 CTA Approval CTA-060548 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR208LR is designed for 12V DC trailer electrical systems and is ADR/ECE approved for all functions for on-road use in Australia. The BR208 Series is also available with an integrated licence plate lamp (BR208LRNP twin pack) and in multi-volt 10-30V DC versions (BR208MV and BR208NPMV) for 24V applications. Confirm the 70mm stud centre mounting spacing and your trailer's operating voltage before purchase. Frequently Asked Questions What is included in the BR208LR twin pack? The BR208LR includes two square LED combination lamps, each with stop/tail and indicator functions, an integrated reflector, a pre-wired 300mm sheathed tinned copper cable, and stainless steel twin stud mounting hardware. Is the BR208LR ADR approved? Yes. All functions are ADR/ECE approved, with indicator approval E4-6R-0116003, stop/tail approval E4-7R-0216003, reflector approval E4-3R-0216003, and CTA approval CTA-060548. Can the BR208LR be used on a 24V vehicle? No. The BR208LR is a 12V DC lamp. For 24V or mixed-voltage applications, the BR208 Series is available in multi-volt 10-30V DC versions, the BR208MV and BR208NPMV. Is the BR208LR waterproof? Yes. The sealed polycarbonate lens and housing are water and dust proof to a submersible standard, making the BR208LR suitable for boat trailers and wet conditions. Does the BR208LR include a licence plate lamp? No. The BR208LR covers stop/tail and indicator functions with an integrated reflector. For a version with an integrated licence plate lamp, choose the BR208LRNP twin pack. How does the BR208LR mount and wire up? Each lamp surface mounts via integrated twin studs at 70mm centres with stainless steel hardware, and connects via the pre-wired 300mm cable using colour-coded wiring: white for earth, red for stop, brown for tail, and green or yellow for indicator.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RB1552MY Revolver LED Beacon Amber 5 Flash Patterns Magnetic Mount A 360-degree high-intensity amber LED beacon from the Roadvision Revolver RB1552 Series, the RB1552MY features 32 SMD LEDs producing 28W, 5 selectable flash patterns, IP67 weatherproof and vibration-proof rating, polycarbonate lens and housing, 10-30V DC multi-volt operation, and a magnetic mount with a 2500mm curly cord and cigarette plug, backed by a 5-year warranty. Product Overview The Roadvision RB1552MY is a magnetic mount LED beacon from the Revolver RB1552 Series, sharing the same LED array, flash pattern selection, housing construction, and electrical specifications as the fixed mount RB1552Y but with a strong magnetic base and 2500mm curly cord with cigarette plug for quick-deploy temporary and portable warning light applications. The 166 x 150mm body houses 32 SMD LEDs producing 28W of high-intensity amber light with a 100,000 hour rated lifespan. Five selectable flash patterns include single, double, triple, quad, and simulated rotating at 140rpm. IP67 rated, EMC CISPR25 Class 5 and SAE Class 1 approved. Operating temperature -40°C to +65°C. Features & Benefits 360-Degree High-Intensity LED Beacon: The RB1552MY delivers 360-degree high-intensity amber light output from a compact 166 x 150mm body for on-highway, mining, and industrial vehicle applications. 32 SMD LEDs - 28W Output - 100,000 Hour Lifespan: Thirty-two SMD LEDs produce 28W of output at 2.7A at 13.8V with a rated lifespan of 100,000 hours and maintenance-free solid-state technology. 5 Selectable Flash Patterns Including Simulated Rotating: Single, double, triple, quad, and simulated rotating at 140rpm selectable flash patterns provide flexibility across a wide range of applications. EMC CISPR25 Class 5 and SAE Class 1 Approved: Confirmed compliance with electromagnetic compatibility and emergency vehicle lighting intensity requirements for on-road and industrial use. Polycarbonate Lens and Housing - IP67 Rated: High-impact polycarbonate construction on both lens and housing with IP67 weatherproof and vibration-proof protection. Magnetic Mount for Temporary and Portable Applications: The strong magnetic base allows the RB1552MY to be quickly mounted to and removed from any ferrous metal vehicle roof or panel surface without tools, making it ideal for temporary warning light applications and hire fleets. 2500mm Curly Cord with Cigarette Plug: The 2500mm curly cord with cigarette plug allows direct connection to a vehicle cigarette lighter socket for fast deployment without permanent wiring. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle electrical systems. Wide Operating Temperature Range: Operates reliably from -40°C to +65°C. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RB1552MY Brand Roadvision Series Revolver RB1552 Description Beacon LED 10-30V 5 Flash Patterns Amber Magnetic Mount Function 5 Selectable Flash Patterns Light Source 32 SMD LEDs Power Output 28W Flash Patterns 5 Input Voltage 10-30V DC Current Draw 2.7A at 13.8V Dimensions 166mm x 150mm Mounting Type Magnetic Mount Wiring 2500mm Curly Cord with Cigarette Plug Lens Construction Polycarbonate Housing Construction Polycarbonate IP Rating IP67 Vibration Proof Yes Operating Temperature -40°C to +65°C Approvals EMC CISPR25 Class 5 and SAE Class 1 LED Lifespan 100,000 Hours Warranty 5 Years Flash Patterns Pattern Single Double Triple Quad Simulated Rotating (140rpm) Compatible With The RB1552MY is compatible with 10-30V DC vehicle electrical systems. The 2500mm curly cord with cigarette plug allows direct connection to a vehicle cigarette lighter socket. EMC CISPR25 Class 5 and SAE Class 1 approved. The RB1552 Series is also available in fixed mount (RB1552Y) and DIN pole mount (RB1552PY) configurations. Frequently Asked Questions What is the advantage of the magnetic mount on the RB1552MY? The magnetic base allows the RB1552MY to be quickly mounted to and removed from any ferrous metal vehicle roof or panel surface without tools, making it ideal for temporary warning light applications, hire fleets, and situations where the beacon needs to be transferred between vehicles. How long is the curly cord on the RB1552MY? The RB1552MY is supplied with a 2500mm curly cord with cigarette plug for direct connection to a vehicle cigarette lighter socket. Is the RB1552MY SAE Class 1 approved? Yes. The RB1552MY holds EMC CISPR25 Class 5 and SAE Class 1 approvals for on-road and industrial warning light applications. What is the difference between the RB1552MY and the RB1552Y? Both share identical LED configuration, flash patterns, housing, and electrical specifications. The RB1552Y uses a 3-hole multi-fit fixed mount with 300mm sheathed cable for permanent installation. The RB1552MY uses a magnetic mount with a 2500mm curly cord and cigarette plug for temporary or portable applications. Is the RB1552MY compatible with 24V vehicles? Yes. The RB1552MY operates across 10-30V DC, compatible with both 12V and 24V vehicle and equipment electrical systems.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL9424SF 94 Series LED Work Light 32W Flood Beam Square A compact square 32W flood beam LED work light from the Roadvision RWL94 Series, the RWL9424SF delivers 2200 lumens from 4 Osram LEDs in a die-cast aluminium housing with polycarbonate lens, featuring Thermal Management Technology, 10-30V DC multi-volt input, 2-pin Deutsch plug, and CTA reverse function approval (CTA-062220), backed by a 5-year warranty. Product Overview The Roadvision RWL9424SF is a square flood beam LED work light from the RWL94 Series, designed for demanding work lighting applications where compact form factor and reliable high-output performance are required. Four Osram LEDs produce 2200 lumens of super-white flood beam output in a 95 x 71 x 41mm die-cast aluminium housing with polycarbonate lens. Roadvision's Thermal Management Technology actively adjusts to the environmental temperature to balance optimal performance and prevent overheating, ensuring consistent output across a wide range of operating conditions. Multi-volt 10-30V DC input at 1.8A at 13.8V is compatible with 12V and 24V systems. Over/under voltage and reverse polarity protection alongside EMI/EMC radio interference approval. Simple 2-wire installation via 2-pin Deutsch plug. CTA approved for reverse function use (CTA-062220). Backed by a 5-year warranty. Features & Benefits 2200 Lumens Flood Beam Output: The RWL9424SF delivers 2200 lumens of broad flood beam illumination suited to reversing, work area, and task lighting applications on vehicles and equipment. 4 Osram LEDs - Super White Output: Four Osram LEDs produce a super-white output close to daylight colour temperature for accurate colour rendering and clear visibility during work operations. Thermal Management Technology: Roadvision's Thermal Management Technology actively monitors and adjusts to the environmental temperature, balancing optimal LED output with overheating prevention for consistent performance and long-term reliability in varying ambient conditions. Compact Square 95 x 71 x 41mm Design: The compact square form factor is suited to installations where space is limited, including reverse lamp positions, toolboxes, service bodies, and bumper bar mounting locations. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and effective heat dissipation, while the polycarbonate lens resists impact and UV degradation in demanding outdoor environments. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated lifespan with maintenance-free solid-state technology provides long-term reliability in continuous work lighting and reversing applications. Multi-Volt 10-30V DC with Low Current Draw: The 10-30V DC multi-volt input at 1.8A at 13.8V is compatible with both 12V and 24V vehicle and equipment electrical systems. Over/Under Voltage and Reverse Polarity Protection: Electronic protection safeguards the LED driver from voltage fluctuations and wiring errors. EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication and electronic systems without interference. CTA Reverse Function Approval (CTA-062220): The RWL9424SF holds CTA approval for reverse function use (CTA-062220), confirming suitability for use as a reverse lamp on vehicles and trailers. 2-Pin Deutsch Plug for Simple 2-Wire Installation: Secure, weatherproof, and vibration-resistant 2-wire connection. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL9424SF Brand Roadvision Series RWL94 Description 94 Series LED Work Lamp 32W Flood - Square Beam Type Flood Beam Maximum Lumens 2200lm Maximum Watts 25W LED Quantity 4 Osram LEDs Input Voltage 10-30V DC Current Draw 1.8A at 13.8V Dimensions 95mm x 71mm x 41mm Shape Square Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring 2-Pin Deutsch Plug Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved CTA Approval Reverse Function - CTA-062220 LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL9424SF is compatible with 10-30V DC vehicle and equipment electrical systems including 12V and 24V platforms. CTA approved for reverse function applications. The 2-pin Deutsch plug provides a secure weatherproof 2-wire connection. A round version with identical specifications is available as the RWL9424RF. Frequently Asked Questions Is the RWL9424SF approved for use as a reverse lamp? Yes. The RWL9424SF holds CTA approval for reverse function use (CTA-062220), confirming suitability for use as a reverse lamp on vehicles and trailers. What is Thermal Management Technology on the RWL9424SF? Roadvision's Thermal Management Technology actively monitors and adjusts to the ambient temperature during operation, balancing optimal LED output with overheating prevention. This ensures consistent light output and long-term reliability across varying operating conditions and ambient temperatures. Is the RWL9424SF compatible with 24V vehicles? Yes. The RWL9424SF operates across 10-30V DC, making it compatible with both 12V and 24V vehicle and equipment electrical systems. What is the difference between the RWL9424SF and the RWL9424RF? Both are identical in LED configuration, output, beam pattern, electrical specifications, and approval ratings. The RWL9424SF is square and measures 95 x 71 x 41mm. The RWL9424RF is round and measures 98 x 75 x 41mm. Choose based on the mounting location and aesthetic preference for your specific installation. What is the rated LED lifespan of the RWL9424SF? The RWL9424SF has a rated LED lifespan of 50,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision ISLS590MV-AW2 LED Strip Lamp 590mm Amber White Switch A 590mm dual colour LED interior/exterior strip lamp from the Roadvision ISLS Series, the ISLS590MV-AW2 features 120 white and 120 amber LEDs producing up to 720 effective lumens in white, an integrated switch for on-the-spot colour selection, 10-30V DC multi-volt input, a slim 13mm aluminium body, IP67 water and dust proof rating, and a 5-year warranty. Product Overview The Roadvision ISLS590MV-AW2 is the largest lamp in the ISLS Series, a range of LED strip lamps designed to illuminate tight spaces with versatility, brightness, and energy efficiency across cabin, cargo bay, tray, under-cabinet, toolbox, step, and utility applications. The dual colour design offers distinct advantages for different activities: the 4500K white output delivers maximum illumination at up to 720 effective lumens, while the amber output enhances outdoor ambiance and reduces insect attraction, making it ideal for camping. The integrated switch allows on-the-spot selection between amber and white light without additional wiring. Measuring 590 x 32 x 13mm and weighing just 120g, the shallow 13mm profile and surface mount design with screw caps make installation straightforward in even the tightest spots. The lamp is supplied pre-wired with a 500mm sheathed cable, and the multi-volt 10-30V DC input draws a super low 0.65 amps at 13.8V, suiting both 12V and 24V systems in cars, 4WDs, trucks, caravans, and commercial vehicles. The lightweight, durable aluminium housing is water and dust proof to IP67 for interior or exterior fitment in extreme conditions, with a 100,000 hour rated LED lifespan from solid-state technology. Features & Benefits Dual Colour Amber and White Output: The ISLS590MV-AW2 features 120 white and 120 amber LEDs, with the 4500K white delivering maximum illumination for work and the amber enhancing outdoor ambiance while reducing insect attraction around the campsite. Integrated Switch for On-The-Spot Control: The integrated switch allows selection between amber and white light directly at the lamp without additional wiring, keeping installation simple. Up to 720 Effective Lumens: In white output, the ISLS590MV-AW2 produces up to 720 effective lumens, the highest output in the ISLS Series, for bright and even coverage of cabins, canopies, trays, and cargo areas. Slim 13mm Profile for Tight Spaces: The entire lamp body is a shallow 13mm thick, making the ISLS590MV-AW2 a versatile solution for tight areas like steps, under cabinets, toolboxes, and under-bonnet lighting. IP67 Water and Dust Proof: The ISLS590MV-AW2 is totally dust and water proof to IP67, suitable for interior or exterior fitment in the most extreme applications. Lightweight Durable Aluminium Housing: The aluminium housing keeps the lamp durable yet lightweight at just 120g, standing up to vehicle and outdoor use. Multi-Volt 10-30V DC with Super Low Current Draw: The 10-30V DC multi-volt input draws just 0.65 amps at 13.8V, making the ISLS590MV-AW2 compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. 100,000 Hour Rated LED Lifespan: Solid-state LED technology delivers a 100,000 hour rated lifespan for maintenance-free operation over the life of the vehicle. Easy Surface Mount Installation - Supplied Pre-Wired: The surface mount design with screw caps, 576mm mounting hole centres, and pre-wired 500mm sheathed cable with colour-coded wiring (black negative, red positive) make for a quick, tidy installation. 5-Year Warranty: The ISLS590MV-AW2 is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU ISLS590MV-AW2 Brand Roadvision Series ISLS Description Interior Lamp Amber/White LED 10-30V 9W Strip Lamp 590mm With Switch Input Voltage 10-30V DC Lumens Light Output (Effective) 720lm (White Only) Light Source 120 White LEDs, 120 Amber LEDs Power 9W Current Draw 0.65A at 13.8V Switch Integrated Switch with Amber/White Selection Dimensions 590 x 32 x 13mm Mounting Holes 576mm Centres Mounting Type Surface Mount with Screw Caps Cable Length 500mm Sheathed Wiring Negative - Black, Positive - Red Housing Aluminium IP Rating IP67 Weight 120g LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The ISLS590MV-AW2 is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles including cars, 4WDs, trucks, caravans, and commercial vehicles, and is suitable for interior or exterior fitment thanks to its IP67 rating. The amber/white ISLS Series is also available in 180mm (ISLS180MV-AW), 290mm (ISLS290MV-AW), and 440mm (ISLS440MV-AW) lengths, with white-only versions available across the same sizes. Confirm the 590mm lamp length and 576mm mounting hole centres fit your intended location before purchase. Frequently Asked Questions How do I switch between amber and white light? The ISLS590MV-AW2 has an integrated switch on the lamp that allows on-the-spot selection between amber and white output without any additional wiring. How bright is the ISLS590MV-AW2? The ISLS590MV-AW2 produces up to 720 effective lumens in white output from 120 white LEDs, the highest output in the ISLS Series. The lamp also carries 120 amber LEDs for the amber output mode. Why choose amber light? The amber output enhances outdoor ambiance and reduces insect attraction, making it well suited to camping and outdoor use, while the 4500K white output provides maximum illumination for work tasks. Can the ISLS590MV-AW2 be mounted outside the vehicle? Yes. The ISLS590MV-AW2 is dust and water proof to IP67, making it suitable for both interior and exterior fitment in extreme conditions. Is the ISLS590MV-AW2 compatible with 24V vehicles? Yes. The ISLS590MV-AW2 operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Is the ISLS590MV-AW2 available in other sizes? Yes. The amber/white ISLS Series is available in four lengths: 180mm, 290mm, 440mm, and this 590mm version, with mounting hole centres and light output scaling with each size.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less