LED Autolamps 355BARWM-2 Set of LED Rear Combination Lamps - Black Design with Sequential Indicator Professional LED rear combination lamp set featuring exclusive black design with diffused tail light, sequential turn signal indicator, stop light, reverse light, and inbuilt reflex reflector providing complete rear lighting functionality in sleek contemporary styling. Measures 356mm x 86mm x 35mm accommodating standard trailer and caravan mounting requirements with bolt surface mount installation using included stainless steel fittings. ECE Australian road approved certification ensures legal compliance for on-road vehicle applications with 12/24 volt multivolt compatibility supporting passenger vehicles through heavy commercial trucks and caravans. IP67 ingress protection rating provides complete dust protection and water immersion resistance ensuring reliable operation in harsh outdoor environments including mud, water crossings, and extreme weather exposure. Features concealed screw design eliminating visible fasteners maintaining clean professional appearance, 30cm cable length facilitating flexible wiring routing, and comprehensive 5-year warranty demonstrating manufacturer confidence in long-term reliability. Sold as matched set including both left and right lamps in retail blister pack packaging. Product Overview The LED Autolamps 355BARWM-2 addresses modern trailer and caravan rear lighting requirements demanding contemporary styling, enhanced visibility, legal compliance, and reliable performance in demanding mobile environments. Traditional incandescent trailer lights suffer from frequent bulb failures, dim illumination, excessive power consumption, heat generation, and dated appearance incompatible with modern vehicle aesthetics. LED technology revolutionizes trailer lighting providing superior brightness, instant illumination without warm-up delay, dramatically reduced power consumption, minimal heat generation, exceptional longevity eliminating frequent bulb replacement, and shock resistance withstanding constant vibration inherent in trailer applications. The sequential turn signal indicator provides enhanced visibility and modern styling where illumination sweeps progressively across lamp face directing attention to turning intention more effectively than simultaneous illumination improving safety during lane changes and turns. This complete rear combination lamp set integrates all required rear lighting functions including diffused tail light for rear presence indication, sequential indicator for turn signal communication, stop light for braking indication, reverse light for backing illumination, and inbuilt reflex reflector for passive visibility when vehicle lighting disabled. The exclusive black design coordinates with contemporary vehicle styling preferences particularly popular in modern trailer and caravan applications moving away from traditional chrome or clear lens aesthetics. ECE Australian road approval certification ensures legal compliance eliminating concerns about roadworthiness inspections or legal issues from non-compliant lighting. The 12/24 volt multivolt design accommodates diverse towing vehicle electrical systems from passenger cars (12V) through heavy trucks and commercial vehicles (24V) without requiring separate lamp versions. IP67 ingress protection rating guarantees complete dust intrusion protection and water immersion resistance to 1 meter depth for 30 minutes ensuring reliable operation through river crossings, heavy rain, pressure washing, and dusty off-road environments. Bolt surface mount installation with stainless steel fittings provides secure attachment resisting corrosion, vibration loosening, and environmental degradation. The concealed screw design eliminates visible fasteners creating clean streamlined appearance matching modern design preferences. Comprehensive 5-year warranty demonstrates manufacturer confidence in LED technology reliability and construction quality providing long-term investment protection. Key Features Complete Set of Left and Right Lamps – Includes both driver and passenger side lamps ensuring matched appearance, consistent performance, and complete rear lighting coverage for trailers, caravans, and commercial vehicle applications requiring symmetrical rear lighting. Sequential Turn Signal Indicator – Progressive sweep illumination pattern directs attention to turning intention more effectively than simultaneous illumination providing enhanced visibility and modern styling improving safety during lane changes and directional maneuvers. Exclusive Black Design – Contemporary black housing and lens design coordinates with modern vehicle styling preferences providing sleek professional appearance replacing traditional chrome or clear lens aesthetics popular in older trailer lighting. Complete Lighting Functions – Integrates diffused tail light, sequential indicator, stop light, reverse light, and inbuilt reflex reflector providing all required rear lighting functions in single compact combination lamp eliminating multiple separate light installations. Diffused Tail Light – Diffused lens design provides even illumination distribution across lamp face improving visibility and creating premium appearance compared to point-source LED designs with visible individual LED elements. Inbuilt Reflex Reflector – Integrated passive reflector provides rear visibility when vehicle lighting disabled improving safety during roadside emergencies, daytime parking, or lighting system failures through reflected ambient light from following vehicles. ECE Australian Road Approved – ECE certification ensures legal compliance for on-road vehicle applications in Australia eliminating concerns about roadworthiness inspections, vehicle registration issues, or legal liability from non-compliant lighting installations. 12/24 Volt Multivolt Compatibility – Wide voltage range accommodates passenger vehicles (12V) through heavy commercial trucks and buses (24V) eliminating need for separate lamp versions and simplifying parts inventory for fleet operators. IP67 Ingress Protection – Complete dust protection (IP6X) and water immersion resistance to 1 meter depth for 30 minutes (IPX7) ensures reliable operation through harsh environments including river crossings, pressure washing, and extreme weather exposure. Concealed Screw Design – No visible fasteners maintain clean streamlined appearance eliminating traditional exposed screw heads that collect dirt, corrode, and detract from professional installation aesthetics. Stainless Steel Mounting Hardware – Corrosion-resistant stainless steel fittings ensure secure long-term mounting in marine environments, coastal regions, and applications involving water exposure or chemical exposure preventing rust-related mounting failures. Bolt Surface Mount Installation – Secure surface mounting with bolt-through design provides reliable attachment to trailer walls, mudguards, and mounting surfaces resisting vibration loosening and mechanical stress from constant trailer movement. 30cm Cable Length – Adequate cable length facilitates flexible wiring routing accommodating various mounting locations and internal wiring paths without requiring cable extensions or creating excessive wire management challenges. 5-Year Warranty Coverage – Comprehensive warranty demonstrates manufacturer confidence in LED technology reliability, construction quality, and environmental protection providing long-term investment protection and reduced total cost of ownership. LED Technology Benefits – Superior brightness, instant illumination, dramatically reduced power consumption, minimal heat generation, exceptional 50,000+ hour lifespan, and shock resistance compared to traditional incandescent bulbs. Technical Specifications Specification Details Model 355BARWM-2 Product Type LED Rear Combination Lamp Set Brand LED Autolamps Set Contents Left and Right Lamps (Pair) Functions Stop, Tail, Sequential Indicator, Reverse, Reflector Design Exclusive Black Design with Diffused Lens Indicator Type Sequential Turn Signal Reflector Inbuilt Reflex Reflector Dimensions (L x W x D) 356mm x 86mm x 35mm Mounting Type Bolt Surface Mount Mounting Hardware Stainless Steel Fittings Included Screw Visibility Concealed (No Visible Screws) Cable Length 30cm Operating Voltage 12/24 Volt Multivolt Ingress Protection IP67 (Dust Tight, Water Immersion Resistant) Certification ECE Australian Road Approved Warranty 5 Years Packaging Retail Blister Pack Purpose Trailer, Caravan, Commercial Vehicle Rear Lighting Frequently Asked Questions Q: What does "sequential indicator" mean and why is it beneficial? A: Sequential indicator means the turn signal illuminates progressively across the lamp face in a sweeping motion from inner to outer edge, rather than all LEDs illuminating simultaneously. This progressive sweep pattern attracts more attention from following drivers and clearly indicates the direction of intended turn or lane change. The sequential animation is more noticeable in peripheral vision compared to simultaneous illumination, improving safety by ensuring following drivers recognize your turning intention earlier. Q: Will these lamps fit my trailer or caravan? A: The 355BARWM-2 measures 356mm long x 86mm wide x 35mm deep and uses bolt surface mount installation. Verify your trailer has adequate mounting space for these dimensions and that existing mounting holes align or can be modified. These lamps replace standard rear combination lamps on trailers, caravans, horse floats, boat trailers, and commercial vehicles. The surface mount design accommodates flat mounting surfaces on trailer walls or mudguards. Professional installation recommended if modifying existing mounting locations. Q: Are these legal for road use in Australia? A: Yes, the 355BARWM-2 is ECE Australian road approved meaning they meet legal requirements for on-road vehicle lighting in Australia. ECE certification ensures compliance with Australian Design Rules (ADRs) for trailer and vehicle lighting. You can confidently install these lamps knowing they meet roadworthiness requirements for vehicle registration and compliance inspections. Always ensure proper installation and correct wiring for full legal compliance. Q: What does IP67 rating mean for these lights? A: IP67 rating means complete protection against dust ingress (IP6X - dust tight) and protection against water immersion up to 1 meter depth for 30 minutes (IPX7). Practically, this means the lamps can withstand pressure washing, river crossings, heavy rain, mud submersion, and harsh outdoor environments without water or dust entering the housing and damaging internal components. This protection level ensures reliable long-term operation in demanding trailer and off-road applications. Q: Can I use these with my 12V car or 24V truck? A: Yes, the 12/24 volt multivolt design automatically accommodates both 12-volt passenger vehicles and 24-volt commercial trucks, buses, or heavy vehicles without requiring different lamp versions or voltage converters. Simply connect to your vehicle's existing trailer lighting circuit regardless of voltage. The lamps automatically operate correctly at either voltage level, making them versatile for various towing applications or fleet vehicles with different electrical systems.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Number Plate Light Black Housing, Twin Pack, Two Required for Compliance Product Overview The LED Autolamps 30BLM is the black housing variant of the 30 series number plate light, sharing the same 65mm x 30mm x 24mm steel housing, 0.14m pre-wired cable, and ADR 48/00 approval as the 30CLM chrome variant. Supplied as a 2-piece pack with both lamps required for a compliant installation. Drawing just 0.02A at 13.8V, IP67 rated, and backed by a 5-year warranty. Features & Benefits Black housing — clean, unobtrusive finish suits a wide range of trailer and vehicle rear panel aesthetics Steel housing — robust metal construction for durability in transport environments 2-piece pack — both lamps supplied; both are required for ADR 48/00 compliance ADR 48/00 approved — meets Australian Design Rules for licence plate illumination; two lamps required for compliance IP67 rated — fully sealed against dust and water immersion Very low current draw — 0.02A at 13.8V for near-zero impact on vehicle electrical systems 0.14m pre-wired cable — compact cable lead for clean installation near the number plate 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 30BLM Lamp Type Number Plate Light Voltage Range 12V – 24V Dimensions 65mm x 30mm x 24mm Mount Centre-to-Centre 65mm Current Draw 0.02A @ 13.8V Cable Length 0.14m Housing Steel, black Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 ADR Note Two lamps required for compliance Packaging 2-piece blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant number plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 30CLM (same lamp, chrome base finish) LED Autolamps 35CLM licence plate light (single-lamp ADR compliant alternative) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 30BLM lamps are required for ADR compliance? Two lamps are required to meet ADR 48/00 compliance — the 2-piece pack supplies both, so a single pack provides a fully compliant installation. How does the 30BLM differ from the 30CLM? The 30BLM has a plain black housing, while the 30CLM has a chrome base finish. Both share the same 65mm x 30mm x 24mm steel housing, ADR 48/00 approval, and all other specifications — choose based on the aesthetic that suits your trailer or vehicle. Is the 30BLM approved for road use in Australia? Yes. The 30BLM is ADR 48/00 approved, meeting Australian Design Rules requirements for legal on-road use as a number plate light — when two units are fitted as specified. What is the current draw of the 30BLM? The 30BLM draws just 0.02A at 13.8V — an extremely low current that has virtually no impact on the vehicle's electrical system. What warranty does the 30BLM carry? The 30BLM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

IP67 ECE-Approved Mini Jumbo Rear Combination LED Lamp for Trucks, Trays and Trailers Product Overview The LED Autolamps 280ARWM is a 12/24V mini jumbo rear combination lamp delivering stop, tail, indicator, and reverse functions in a single low-profile unit. Measuring 282mm x 95mm with a slim 28mm depth, it's engineered for surface mounting on small to medium-sized trays, trucks, and trailers clean, compact, and purpose-built for Australian road conditions. Chrome inner reflectors amplify the high-powered LEDs to deliver outstanding visibility while meeting ECE and ECM road approval standards. A stick-on red reflector is included as standard. Built with solid-state circuit technology and no moving parts, the 280ARWM is vibration tested and fully sealed to IP67 meaning it handles dust, water, and the kind of punishment that comes with hard working Australian transport environments. Features & Benefits Mini jumbo design — 282mm x 95mm x 28mm low-profile form factor suits surface mounting on trays, trucks, and trailers without bulk ECE & ECM road approved — meets international and Australian road approval standards for legal on-road use IP67 rated — fully sealed against dust ingress and water immersion, built for demanding outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport applications Solid-state circuit technology — no moving parts means greater resistance to vibration and shock across the life of the unit Tough acrylic lens with chrome inner reflectors — enhances LED output for maximum visibility while maintaining a sharp, professional appearance Stop/tail/indicator/reverse functions — complete rear lighting in a single lamp, reducing wiring complexity and installation time Stick-on red reflector included — adds a passive reflective element as standard Technical Specs Specification Detail SKU 280ARWM Lamp Type Stop / Tail / Indicator / Reverse Voltage 12V – 24V Overall Size 282mm x 95mm x 28mm Cable Hardwired, 1200mm Protection Rating IP67 Approval ECE & ECM Stop Current Draw 0.15A @ 13.8V / 0.11A @ 28V Tail Current Draw 0.02A @ 13.8V / 0.03A @ 28V Indicator Current Draw 0.14A @ 13.8V / 0.11A @ 28V Reverse Current Draw 0.17A @ 13.8V / 0.13A @ 28V Lens Material Tough Acrylic Inner Reflector Chrome Included Accessories Stick-on red reflector Mounting Surface mount (rear bolts) Compatible With / Goes Well With Small to medium trays, trucks, and trailers 12V light commercial and passenger vehicles 24V heavy transport and truck applications Trailer builds requiring ECE-approved rear combination lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 280ARWM approved for road use in Australia? Yes. The 280ARWM carries ECE and ECM road approvals, meeting the certification requirements for legal on-road use on Australian roads. What functions does the 280ARWM cover? It combines stop, tail, indicator, and reverse into a single lamp unit, making it a complete rear lighting solution for trays, trucks, and trailers. What is the IP rating on the 280ARWM? The 280ARWM is rated IP67, meaning it is fully protected against dust ingress and tested for water immersion — suitable for exposed outdoor and transport environments. Does the 280ARWM work on both 12V and 24V systems? Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification. How is the 280ARWM mounted? It is surface mounted using bolts at the rear of the unit. The slim 28mm depth and 282mm x 95mm footprint make it straightforward to fit on trays, truck bodies, and trailer panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White Front End Outline Marker Twin Pack Recessed 3mm, ECE Approved, 12/24V. Product Overview The LED Autolamps 7922WM2 is a twin blister pack of 7922 Series white front end outline markers two lamps per pack for complete left and right front marker installation. Sharing the same ultra-slim 79mm x 22mm x 3mm recessed form factor, ECE road approval, IP67 waterproofing, and 12/24V multivolt operation as the single-unit 7922WMCSB, the 7922WM2 provides the standard retail twin pack format for individual buyers and trailer builders. At just 3mm deep, the 7922 Series is one of the slimmest recessed marker lamps available. Supplied with screws for recessed installation. Backed by LED Autolamps' 5-year warranty. Key Specifications Function: White front end outline (FEO) marker Dimensions: 79mm x 22mm x 3mm Mount type: Recessed screws supplied IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ECE road approved Warranty: 5 years Pack quantity: 2 (twin blister) Brand: LED Autolamps SKU: 7922WM2 Features & Benefits Twin blister pack: Two white FEO markers per pack for left and right front fitment in a single purchase Ultra-slim 3mm depth: Only 3mm deep one of the slimmest recessed marker lamps available Recessed mount: Flush installation for a clean, professional appearance screws supplied ECE road approved: Certified for white front end outline marker use on road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 7922WM2 Brand LED Autolamps Series 7922 Series Function White Front End Outline Marker Dimensions 79mm x 22mm x 3mm Mount Type Recessed screws supplied IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ECE road approved Warranty 5 Years Pack Quantity 2 (twin blister) Compatible With Suits all 12V and 24V trailers, caravans, and commercial vehicles requiring white recessed front end outline markers: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Frequently Asked Questions How many lamps are in the 7922WM2 twin pack? Two one for each side of the vehicle or trailer front. What is the difference between the 7922WM2 and the 7922WMCSB? Both are 7922 Series white front end outline markers. The 7922WM2 is a standard twin blister retail pack of two lamps while the 7922WMCSB is a single bulk unit with a chrome surround. The 7922WMCSB also provides licence plate lamp function in addition to the front end outline marker function. Is this lamp ECE approved? Yes ECE road approved for white front end outline marker use. How deep is this lamp when fitted? Just 3mm one of the slimmest recessed markers available. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Push Lock, Pre-Wired Convenience Features: Fixture type: Push lock Hole Diameter 28.5mm Individually packed Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!  

Read more less

12V Interior LED Strip Light with Touch Sensor 20 LEDs, 474lm, 6500K, Aluminium Housing Product Overview The LED Autolamps 40410MCU is a 12V interior LED strip light featuring a built-in MCU-controlled touch sensor switch, housed in a black aluminium body with a polycarbonate lens. At 410mm long with 20 high-brightness SMD LEDs, it delivers 474 effective lumens of 6500K cool daylight output bright, functional illumination for truck cabs, caravan interiors, motorhomes, and commercial vehicle cabins. The low-profile slimline design mounts directly to ceilings and panels, and the touch sensor provides convenient on/off control at the fitting without a separate switch. Backed by a 3-year warranty. Features & Benefits 20 SMD LEDs producing 474 effective lumens — strong, practical output for interior working and living spaces 6500K cool daylight output — crisp, clear light suited to task-oriented interior spaces including truck cabs and utility areas Built-in MCU touch sensor switch — microcontroller-driven touch on/off control integrated into the lamp body Aluminium housing — superior heat dissipation extends LED life and improves long-term reliability over plastic housings Polycarbonate lens — impact-resistant lens with good optical clarity Black finish — clean, modern appearance suits a range of caravan and vehicle interior styles Low-profile slimline 410mm form factor — mounts flush to ceilings and panels without adding bulk 12V only — designed for 12V vehicle and caravan electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 40410MCU Lamp Type Interior Strip Light LED Quantity 20 SMD Colour Temperature 6500K Cool Daylight Raw Lumens 600 lm Effective Lumens 474 lm Current Draw 0.92A @ 12.8V Length 410mm Housing Material Aluminium Lens Material Polycarbonate Housing Colour Black Switch Built-in MCU touch sensor Voltage 12V Mounting Surface mount Warranty 3 years Compatible With / Goes Well With Truck cabs, caravan interiors, motorhomes, and commercial vehicle cabins 12V caravan, vehicle, and equipment electrical systems LED Autolamps 40260MCU interior strip lamp (same series, 260mm format) LED Autolamps 16606WM-SW and 20109WM-SW oval touch switch lamps (same touch concept, different form factor) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions What colour temperature does the 40410MCU produce? It produces 6500K cool daylight — a crisp, clear white light suited to task-oriented interiors including truck cabs, tool storage areas, and working spaces where good visibility is important. How bright is the 40410MCU? It delivers 474 effective lumens from 20 SMD LEDs — strong, functional output for a 410mm interior strip lamp. What is MCU circuitry and how does it affect the touch switch? MCU (microcontroller unit) circuitry processes the touch input electronically, providing reliable, consistent switching response. It also enables smooth control behaviour compared to basic capacitive touch implementations. How does the 40410MCU differ from the 40260MCU? The 40410MCU is 410mm long with 20 LEDs, 474 effective lumens, and confirmed 6500K output. The 40260MCU is shorter at approximately 260mm with unconfirmed lumen output — choose the 40410MCU for larger spaces requiring confirmed higher output. What warranty does the 40410MCU carry? The 40410MCU is backed by a 3-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail Strip Lamp with 10 Square LEDs Ultra-Slim 3mm Flush Mount, IP67 Product Overview The LED Autolamps 235R12 is a 12V stop/tail strip lamp fitted with 10 square LEDs in the same 237mm x 25mm x 3mm ultra-slim rectangular housing as the 235A12 indicator strip. Designed for flush recessed mounting with a 216mm centre-to-centre spacing, it delivers red stop/tail output in a clean, modern strip format the stop/tail companion to the 235A12 for a matched flush-mounted rear lighting set. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits 10 square LEDs — distinctive square LED array delivers consistent red stop/tail output matching the 235A12's visual style Ultra-slim 3mm depth — flush recessed mount sits virtually flush with the panel for a clean, integrated finish 216mm centre-to-centre mount spacing — confirm against your panel or bracket before installation ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 235R12 Lamp Type Stop / Tail Strip LED Quantity 10 square LED Colour Red Voltage 12V Length 237mm Dimensions 237mm x 25mm x 3mm Mount Centre-to-Centre 216mm Mounting Flush recessed Protection Rating IP67 Compliance ADR Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring flush-mount stop/tail strip lamps 12V trailer and vehicle electrical systems LED Autolamps 235A12 indicator strip lamp (same 237mm form factor — natural matched pair) LED Autolamps 235W12E reverse strip lamp (same 237mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 235R12 approved for road use in Australia? Yes. The LED Autolamps 235R12 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. How does the 235R12 pair with the 235A12? Both share the same 237mm x 25mm x 3mm ultra-slim flush recessed form factor with 10 square LEDs — making the 235R12 (stop/tail) and 235A12 (indicator) a natural matched pair for a uniform rear lighting set with a consistent appearance. What is the centre-to-centre mounting distance? The 235R12 has a 216mm centre-to-centre mount spacing. Confirm this measurement against your panel or bracket before installation. What is the IP rating on the 235R12? The 235R12 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 235R12 carry? The 235R12 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Side Marker Light Red/Amber Incandescent Features: Suitable For 12-volt Or 24-volt Applications 125 X 65 X 30mm Globes Not Included Complies With ADR 45/00 Specifications: Warranty: One Year Length: 125mm Voltage: 12 To 24 Weight: .1kg Width: 65mm Colour: Red/amber Light Style: Side Marker Light Light Type: Incandescent Size: 130 X 60 X 40mm Mount: Surface Mount Compliance: ADR 45/00 Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

Ultra-Slimline 12V Stop/Tail/Indicator Twin Pack 18 LED Black PCB, Black Bracket, ADR Approved, IP67. Product Overview The LED Autolamps 235BBSTI12/2 is a twin blister pack of 235 series ultra-slimline stop/tail/indicator combination lamps one of the most popular tray ute and trailer lighting upgrades in the LED Autolamps range. The 235BBSTI12/2 suits new tray utes and 4WDs, with each lamp measuring just 259mm x 46mm x 17mm in a surface mount black bracket configuration. The 235 series features 18 LEDs with a 40cm cable and high-impact PMMA lens over a black PCB. The clear lens with amber and red LEDs delivers a modern, clean look. ADR approved, IP67 rated, and 12V only supplied as a matched left and right pair in a twin blister pack. Backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator LED count: 18 LEDs Lens: Clear amber and red internal LEDs PCB: Black Bracket: Black Dimensions: 259mm x 46mm x 17mm Cable length: 40cm Mount type: Surface mount 2 bolt, flat surface IP rating: IP67 Input voltage: 12V only Compliance: ADR approved Warranty: 5 years Pack quantity: 2 lamps (twin blister) Brand: LED Autolamps SKU: 235BBSTI12/2 Features & Benefits Ultra-slim 17mm depth: One of the slimmest combination lamps available at just 17mm deep ideal for tray utes, trailers, and low-clearance mounting applications Black PCB and black bracket: Stealth black aesthetic suits modern tray ute and 4WD builds where a discreet, dark lamp appearance is preferred 18 LEDs clear lens: Clear lens with amber and red internal LEDs delivers a modern, clean appearance without coloured plastic lenses 40cm cable: Generous pre-wired lead for flexible routing in tray and trailer installations ADR approved: Legally compliant for Australian road use across all three functions IP67 waterproof: Completely sealed against dust and temporary water immersion 12V only: Direct 12V compatibility for tray utes, caravans, and light trailers Twin blister pack: Two lamps per pack for complete left and right rear fitment 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 235BBSTI12/2 Brand LED Autolamps Series 235 Series Functions Stop, Tail, Indicator LED Count 18 Lens Clear amber and red internal LEDs PCB Black Bracket Black Dimensions 259mm x 46mm x 17mm Cable Length 40cm Mount Type Surface mount 2 bolt IP Rating IP67 Input Voltage 12V only Compliance ADR approved Warranty 5 Years Pack Quantity 2 lamps (twin blister) Compatible With Ideal for: New generation tray utes (Hilux, Ranger, BT-50, Navara, Amarok, etc.) 4WD tray and canopy builds Box trailers and light commercial trailers Caravans requiring slimline 12V stop/tail/indicator lamps Pairs well with: LED Autolamps 42WM white front position marker LED Autolamps 42AM amber side direction indicator LED Autolamps 5025AM2 amber side marker twin pack LED Autolamps 7030R red self-adhesive reflectors Frequently Asked Questions Is this lamp 12V or 24V? The 235BBSTI12/2 is 12V only. For a 24V version, refer to the LED Autolamps 235BSTI24. How many lamps are in the twin blister pack? Two lamps are included one for each side of the vehicle or trailer rear. What is the depth of this lamp? Just 17mm one of the slimmest combination lamps available, making it ideal for low-clearance tray ute and trailer mounting applications. Does this lamp suit tray utes? Yes the 235BBSTI12/2 is specifically noted as suitable for new tray ute and 4WD applications. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm 12V compatibility before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE/CTA Approved 12/24V Indicator Lamp Twin Pack Clear Lens, 8mm Ultra-Slim, IP67 Product Overview The LED Autolamps 12ACM-2 is a 12/24V rear indicator lamp with a clear lens, supplied as a twin blister pack of two lamps for a complete left and right installation. Measuring 131mm x 30mm x 8mm, the ultra-slim 8mm profile mounts via 3M adhesive tape or screws in horizontal or vertical orientation suited to trailers, caravans, trucks, and commercial vehicles where a low-profile, discreet indicator solution is required. ECE and CTA approved, IP67 rated, and backed by a 5-year warranty. The clear lens presents a clean appearance when inactive, with amber indicator colour activating when the lamp is energised. Features & Benefits Twin blister pack — two lamps supplied for a complete left and right installation in a single purchase Clear lens — clean, colourless appearance when inactive; amber indicator colour activates when the lamp is energised Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces Horizontal and vertical mount — flexible orientation suits a wide range of panel layouts and installation angles ECE and CTA approved — meets international and Australian road approval standards for legal on-road use as a rear indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 12ACM-2 Pack Contents 2 lamps Lamp Type Rear Indicator Lens Colour Clear Voltage Range 12V – 24V Dimensions 131mm x 30mm x 8mm Mounting 3M tape / screw Orientation Horizontal or vertical Protection Rating IP67 Approval ECE, CTA Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring low-profile indicator lamps 12V light vehicles and 24V heavy transport applications Installations requiring flexible mounting orientation or adhesive fitting LED Autolamps 12ACM-2 companion stop/tail and reverse lamps in the same series LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is included in the 12ACM-2 twin blister pack? The pack contains two lamps, providing a complete left and right rear indicator installation in a single purchase. What does the clear lens look like when inactive? When not energised, the lens appears clear and colourless. The amber indicator colour is produced by the LEDs and only becomes visible when the lamp is activated. What mounting options does the 12ACM-2 support? It can be mounted using 3M adhesive tape or screws, and installed in either horizontal or vertical orientation — adaptable to a wide range of vehicle panel layouts. What compliance approvals does the 12ACM-2 carry? The 12ACM-2 is approved under ECE and CTA standards, meeting international and Australian road approval requirements for legal on-road use as a rear indicator lamp. What warranty does the 12ACM-2 carry? The 12ACM-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JW Speaker LED W5W T10 Wedge Globe Kit 65LM White 6000K 24V - Twin Pack: Improved Chip Technology, Light Output & Design! JW Speaker 990111 Features: Ultra Longer Life Shock Resistant Not Approved for ADR, ECE, or DOT Precise Light Source Low Current Draw JW Speaker 990111 Specifications: Base: T10 Type: W5W (Wedge) Super Bright: 65LM Colour Temp: 6000K White Operating Voltage: DC 24V Operating Temp: -40¬∞ / +80¬∞ C (130¬∞ Max) Weight: 0.06kg Legendary Products & Support From Authorized Dealers When you choose JW Speaker, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JW Speaker dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JW Speaker's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JW Speaker dealer today!

Read more less

Category 6 Side Direction Indicator for GVM Upgraded Vehicles ECE Approved, 3M Tape, Twin Pack. Product Overview The LED Autolamps 77ACM2 is a Category 6 side direction indicator specifically suitable for vehicles that have undergone a GVM (Gross Vehicle Mass) upgrade. When a vehicle's GVM is increased through suspension, chassis, or load capacity modifications, additional or upgraded side indicator lamps are often required to maintain compliance with Australian vehicle standards and the 77ACM2 is purpose-built to meet this specific Category 6 requirement. Featuring a clear lens with 3 internal LEDs, the 77ACM2 measures a compact 77mm x 52mm x 22mm and installs via 3M adhesive tape with a plug-and-play connection no complex wiring required. ECE Category 6 approved (E96R01/2922383*00), IP67 rated, and operating across a broad 9–32V voltage range, the 77ACM2 suits both 12V and 24V vehicles including those that have undergone GVM upgrades for towing, camping, or commercial applications. Supplied as a twin blister pack and backed by LED Autolamps' 5-year warranty. Key Specifications Function: Category 6 side direction indicator LED count: 3 Lens: Clear Dimensions: 77mm x 52mm x 22mm Mount: 3M adhesive tape with plug IP rating: IP67 Input voltage: 9–32V DC (multivolt) Current draw: 0.12A @ 13.8V / 0.08A @ 28V Compliance: ECE Category 6 E96R01/2922383*00 Warranty: 5 years Pack quantity: 2 (twin blister) Brand: LED Autolamps SKU: 77ACM2 Features & Benefits Suitable for GVM upgrades: Specifically designed to meet Category 6 side indicator requirements for vehicles that have undergone a GVM upgrade, helping maintain compliance after suspension, chassis, or load capacity modifications Category 6 ECE approved: Certified under ECE E96R01/2922383*00 for legal compliance as a Category 6 side direction indicator Easy 3M tape and plug fitting: Adhesive mount with a plug-and-play connector simplifies installation no splicing or complex wiring required Low profile compact design: At just 22mm deep, the 77ACM2 sits discreetly on vehicle body panels without protruding 9–32V broad voltage range: Suits both 12V passenger vehicles and 24V commercial trucks, covering the widest possible range of GVM-upgraded vehicle applications IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion Low current draw: 0.12A at 13.8V and 0.08A at 28V minimal load on the vehicle's electrical system Twin blister pack: Two lamps per pack for left and right side fitment in a single purchase 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 77ACM2 Brand LED Autolamps Function Category 6 Side Direction Indicator LED Count 3 Lens Clear Dimensions 77mm x 52mm x 22mm Mount Type 3M adhesive tape + plug IP Rating IP67 Input Voltage 9–32V DC (multivolt) Current Draw 0.12A @ 13.8V / 0.08A @ 28V Compliance ECE Category 6 E96R01/2922383*00 Warranty 5 Years Pack Quantity 2 (twin blister) Compatible With Suitable for: Vehicles that have undergone a GVM (Gross Vehicle Mass) upgrade 4WDs and utes requiring Category 6 side indicator compliance after modification Commercial vehicles requiring additional side indicator visibility Frequently Asked Questions Why would a GVM upgraded vehicle need this specific indicator? When a vehicle's GVM is increased through suspension, chassis, or load capacity modifications, the increased vehicle dimensions or load configuration can require additional or upgraded side indicator visibility to maintain compliance with Australian vehicle standards. The 77ACM2 is specifically designed to meet Category 6 side direction indicator requirements relevant to these modifications. What does Category 6 mean for a side indicator? Category 6 is an ECE classification for side direction indicators, with specific technical and photometric requirements. The 77ACM2 is certified under ECE E96R01/2922383*00 to meet these Category 6 requirements. How is this lamp installed? The 77ACM2 uses 3M adhesive tape combined with a plug-and-play connector for fast installation. Ensure the mounting surface is clean, dry, and free of grease or wax before applying the adhesive. How many lamps are included in this pack? The twin blister pack contains two lamps sufficient for both left and right side fitment. Should I confirm GVM compliance requirements before purchasing? Yes GVM upgrade compliance requirements vary by state and modification type. Confirm your specific requirements with your engineering certifier, installer, or relevant state authority before purchasing and installing this product for compliance purposes. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less