Ultra-Compact 12V Amber Side Marker Lamp Twin Pack 58mm, IP67, Screw Mount, 5-Year Warranty Product Overview The LED Autolamps 16A12-2 is a 12V amber side marker lamp supplied as a twin blister pack, in the same ultra-compact 58mm x 16mm x 13mm form factor as the rest of the 16 series. Designed for side marker applications on trailers, trucks, and commercial vehicles where a discreet, low-profile amber marker is required. Road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Amber LED output — delivers correct amber side marker output for lateral visibility on trailers and commercial vehicles Twin blister pack — both lamps supplied for a complete left and right side marker installation Smallest marker lamp in the LED Autolamps range — at 58mm x 16mm x 13mm, fits where standard side markers won't Sleek streamlined design — low-profile rectangular form factor blends cleanly into vehicle body panels Easy fit screw mount — straightforward single-screw installation on trailer and truck body panels Road approved — meets road approval standards for legal on-road use as a side marker lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 16A12-2 Pack Contents 2 lamps (twin) Lamp Type Side Marker LED Colour Amber Voltage Range 12V / 24V Dimensions 58mm x 16mm x 13mm Mounting Screw mount Protection Rating IP67 Compliance Road approved Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ultra-compact amber side marker lamps 12V and 24V vehicle electrical systems LED Autolamps 181AME amber side marker (standard round recessed variant) LED Autolamps 16R12-2 rear position marker (same 16 series form factor) LED Autolamps 16W12-2 front outline marker (same 16 series form factor) LED Autolamps wiring harnesses and lighting accessories Frequently Asked Questions Is the 16A12-2 approved for road use in Australia? Yes. The 16A12-2 is road approved, meeting the standards required for legal on-road use as a side marker lamp. What makes the 16A12-2 different from the 181AME amber side marker? The 16A12-2 is 58mm x 16mm x 13mm rectangular with a screw mount and comes as a twin pack, while the 181AME is a 28mm round mini recessed marker. The 16A12-2 suits panel surface mounting; the 181AME suits flush recessed installations. What does the twin blister pack include? The twin blister pack contains two lamps for a complete left and right side marker installation in a single purchase. What is the IP rating on the 16A12-2? The 16A12-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor trailer and truck body mounting. What warranty does the 16A12-2 carry? The 16A12-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Sequential Amber Indicator Strip Clear Lens, Ultra-Slim 3mm, 40cm Cable Product Overview The LED Autolamps 235CSEQ-2 is the clear lens variant of the 235ASEQ-2 sequential indicator strip delivering the same sweeping sequential flash pattern in the same 237mm x 25mm x 3mm ultra-slim form factor, but with a clear lens that presents a clean, colourless appearance when inactive. Supplied with a 40cm cable lead for installation flexibility. ECE approved and rated IP67, backed by a 5-year warranty. Features & Benefits Clear lens — clean, modern colourless appearance when inactive; amber sequential output activates when the lamp is energised Sequential indicator — LEDs sweep progressively across the strip, creating a directional effect for improved conspicuity and a premium appearance Ultra-slim 3mm depth — flush recessed mount for a clean, integrated finish on trailer and caravan rear panels 40cm cable included — pre-wired lead for flexible installation routing Recessed fitting — primary mount for a flush finish; optional surface mount brackets available ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 235CSEQ-2 Lamp Type Sequential Indicator Strip Lens Colour Clear Voltage 12V Dimensions 237mm x 25mm x 3mm Cable Length 400mm Mounting Recessed (surface mount brackets available) Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring sequential indicator lighting with a clear lens finish 12V trailer and vehicle electrical systems LED Autolamps 235ASEQ-2 amber lens sequential indicator strip (same dimensions, amber lens) LED Autolamps 235R12 stop/tail strip lamp (same 237mm form factor) LED Autolamps surface mount bracket accessories (confirm availability with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 235CSEQ-2 approved for road use in Australia? Yes. The 235CSEQ-2 is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. How does the 235CSEQ-2 differ from the 235ASEQ-2? The 235CSEQ-2 has a clear lens that appears colourless when inactive, while the 235ASEQ-2 has a traditional amber lens. Both are sequential indicator strips in the same 237mm x 25mm x 3mm form factor — choose based on the aesthetic preferred for inactive appearance. What does sequential indicator mean? The sequential indicator sweeps its LEDs progressively across the strip in a directional wave, rather than flashing uniformly — creating a more visible and distinctive indicator signal. Can the 235CSEQ-2 be surface mounted? Yes. While primarily designed for recessed fitting, optional surface mount brackets are available. Contact F.A.E. to confirm compatible bracket accessories. What warranty does the 235CSEQ-2 carry? The 235CSEQ-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

240lm Natural White Touch Switch LED Lamp Oval, Interior/Exterior, IP67, 10–30V Product Overview The LED Autolamps 16606WM-SW is a small oval low-profile LED lamp with a built-in touch switch, delivering 240 effective lumens at 4500K natural white with a measured output of 74 lux at 1 metre. Designed for interior and exterior use across trucks, caravans, trailers, and commercial vehicles, the touch switch provides direct on/off control at the fitting without requiring a separate switch in the circuit. Rated IP67 and operating across a wide 10–30V range compatible with 12V and 24V electrical systems. Features & Benefits Touch switch — on/off control integrated directly into the lamp for convenient hands-free operation without a separate wiring switch 240 effective lumens — functional light output suited to interior and confined exterior lighting applications 4500K natural white — balanced colour temperature delivers clear, comfortable illumination 74 lux at 1 metre — verified illuminance figure for real-world brightness assessment IP67 rated — fully sealed against dust and water immersion; suitable for both interior and exterior mounting Low-profile oval design — compact form factor sits neatly on ceilings and panels Wide voltage range 10–30V — compatible with 12V and 24V vehicle and equipment electrical systems Technical Specs Specification Detail SKU 16606WM-SW Lamp Type Interior / Exterior Colour Temperature 4500K Natural White Effective Lumens 240 lm Illuminance 74 lux @ 1m Switch Touch Voltage Range 10V – 30V Protection Rating IP67 Profile Low profile oval Compatible With / Goes Well With Truck cabs, caravan interiors, canopy interiors, and commercial vehicle cabins Storage compartments and utility areas requiring direct touch control 12V and 24V vehicle and equipment electrical systems LED Autolamps 13118WM-SW round interior lamp with switch (same switch concept, larger format) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions How does the touch switch work on the 16606WM-SW? The touch switch is integrated into the lamp body — a light touch activates or deactivates the lamp without needing to reach a separate wall switch, making it ideal for confined spaces like canopy interiors and storage compartments. How does the 16606WM-SW compare to the 13118WM-SW? Both feature a built-in switch and 4500K natural white output. The 16606WM-SW is a smaller oval lamp producing 240lm at 74 lux @ 1m, while the 13118WM-SW is a larger round lamp producing 750lm at 225 lux @ 1m — choose based on the size of the space being lit. Can the 16606WM-SW be used in exterior applications? Yes. With an IP67 rating, the 16606WM-SW is fully sealed against dust and water immersion, making it suitable for both interior and exposed exterior mounting on vehicle bodies. What voltage range does the 16606WM-SW support? It operates across 10V to 30V, making it compatible with 12V and 24V vehicle electrical systems across a broad input range. Does the 16606WM-SW come with a warranty? Warranty information was not confirmed in available supplier data for this SKU — contact F.A.E. or LED Autolamps to confirm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

240lm Natural White Oval LED Lamp Interior/Exterior, IP67, 10–30V Product Overview The LED Autolamps 16606WM is the standard variant of the small oval 16606WM series delivering 240 effective lumens at 4500K natural white with 74 lux at 1 metre, without a built-in switch or PIR sensor. Designed for interior and exterior lighting on trucks, caravans, trailers, and commercial vehicles, it is wired into the circuit and controlled externally via the vehicle's standard switching. Rated IP67 and operating across a wide 10–30V range. Features & Benefits 240 effective lumens — functional light output suited to interior and confined exterior lighting applications 4500K natural white — balanced colour temperature delivers clear, comfortable illumination for working and living spaces 74 lux at 1 metre — verified illuminance figure for real-world brightness assessment at working distance IP67 rated — fully sealed against dust and water immersion; suitable for both interior and exterior mounting Low-profile oval design — compact form factor sits neatly on ceilings and panels without adding bulk Wide voltage range 10–30V — compatible with 12V and 24V vehicle and equipment electrical systems No built-in switch — controlled via external vehicle wiring; suits installations with existing switch panels Technical Specs Specification Detail SKU 16606WM Lamp Type Interior / Exterior Colour Temperature 4500K Natural White Effective Lumens 240 lm Illuminance 74 lux @ 1m Voltage Range 10V – 30V Protection Rating IP67 Profile Low profile oval Compatible With / Goes Well With Truck cabs, caravan interiors, canopy interiors, and commercial vehicle cabins Storage compartments and utility areas with existing external switch control 12V and 24V vehicle and equipment electrical systems LED Autolamps 16606WM-SW oval touch switch variant (same lamp with built-in touch switch) LED Autolamps 16606WM-PIR oval PIR variant (same lamp with motion sensor) LED Autolamps 13118WM round interior lamp (same concept, larger format) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions How does the 16606WM differ from the 16606WM-SW and 16606WM-PIR? The 16606WM is the standard lamp without any built-in control — it is switched externally via the vehicle's wiring. The 16606WM-SW adds a built-in touch switch, and the 16606WM-PIR adds a PIR motion sensor for automatic activation. All three share the same 240lm, 4500K output and IP67 rating. Can the 16606WM be used in exterior applications? Yes. With an IP67 rating, the 16606WM is fully sealed against dust and water immersion, making it suitable for both interior and exposed exterior mounting. What colour temperature does the 16606WM produce? It produces 4500K natural white — a balanced tone between warm white and cool daylight suited to working and living spaces in vehicles and caravans. What voltage range does the 16606WM support? It operates across 10V to 30V, making it compatible with 12V and 24V vehicle electrical systems across a broad input range. Does the 16606WM come with a warranty? Warranty information was not confirmed in available supplier data for this SKU — contact F.A.E. or LED Autolamps to confirm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Latest L.E.D High-Performance Technology Gives a Touch of Prestige to Any Modern Caravan, Motor Home, Truck, Trailer or Bus53 With plenty of variety and options, Model 43's stylish and modern design, along with the latest L.E.D high-performance technology gives a touch of prestige to any modern caravan, motor home, truck, trailer or bus.Features: 150mm Diameter Chrome ring 0.5m Hard wired sheathed cable Contoured 150mm White Base Includes mounting screws and an integrated gasket on the surface of the mounting base Current Draw: 0.08A IP Rating: IP66 and IP67 ADR Approved 5-year L.E.D Warranty Virtually unbreakable polycarbonate lens Specifications: Input Voltage Range: 9-33 Volt Current Draw: 0.08A IP Rating: IP66 and IP67 Size: 150mm diameter Candela Rating: 19 ADR: 6/00 2a E4 01 16453 Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

ECE Approved 12V Sequential Amber Indicator Strip 10 LEDs, Ultra-Slim 3mm, IP67 Product Overview The LED Autolamps 235ASEQ-2 is a 12V sequential indicator strip light fitted with 10 amber LEDs, designed for a sleek, modern sweeping indicator effect on trailers, caravans, and custom vehicle builds. Measuring 237mm x 25mm at just 3mm deep, it is one of the thinnest indicator solutions in the LED Autolamps range suitable for recessed fitting or surface mounting with optional brackets. ECE approved and rated IP67, backed by a 5-year warranty. Supplied as a blister pack. Features & Benefits Sequential indicator — LEDs sweep progressively rather than flashing uniformly, creating a modern, premium appearance and improved conspicuity 10 amber LEDs — delivers correct amber indicator output across the full 237mm strip face Ultra-slim 3mm depth — among the thinnest indicator lamp options available; suits recessed fitting in tight panel spaces Recessed fitting — primary mounting for a flush, integrated finish Surface mount brackets available — optional surface mount accessories for installations where recessed fitting is not possible ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 235ASEQ-2 Lamp Type Sequential Indicator Strip LED Quantity 10 amber Voltage 12V Dimensions 237mm x 25mm x 3mm Mounting Recessed (surface mount brackets available) Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and custom vehicle builds requiring sequential indicator lighting 12V trailer and vehicle electrical systems ECE-approved indicator lighting for road-legal sequential indicator applications LED Autolamps surface mount bracket accessories (confirm availability with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 235ASEQ-2 approved for road use in Australia? Yes. The 235ASEQ-2 is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. What does sequential indicator mean? Rather than flashing on and off uniformly, the sequential indicator sweeps its 10 LEDs progressively across the strip — creating a directional sweeping effect that is both visually distinctive and improves visibility to following drivers. How thin is the 235ASEQ-2? At just 3mm deep, the 235ASEQ-2 is an ultra-slim strip lamp — suited to recessed fitting in tight panel spaces where conventional indicator lamps would not fit. Can the 235ASEQ-2 be surface mounted? Yes. While primarily designed for recessed fitting, optional surface mount brackets are available. Contact F.A.E. to confirm compatible bracket accessories. What warranty does the 235ASEQ-2 carry? The 235ASEQ-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Caravan Awning Light 18 LEDs, 80 Lux @ 1m, 3000K Warm White, 260mm Black Product Overview The LED Autolamps 23260BLK is a 12V caravan awning light in a slim 260mm rectangular black housing, fitted with 18 LEDs producing warm white 3000K output with 80 lux at 1 metre across a 60° beam spread. The warm white colour temperature creates an inviting ambience beneath the awning suited to evening entertaining and relaxed caravan outdoor living. Mounted via 2 screws and backed by a 3-year warranty. A longer 443mm variant is also available in the 23 series for larger awning spans. Features & Benefits 18 LEDs producing 80 lux @ 1m — practical, measured output for effective awning and outdoor area illumination 3000K warm white — warm, inviting colour temperature ideal for outdoor entertaining beneath a caravan awning 60° light spread — focused downward spread illuminates the area directly beneath the awning without excessive glare 260mm compact length — suits standard caravan awning rail mounting; pairs with the 443mm 36 LED variant for larger spans Black housing — clean finish matches modern caravan exterior aesthetics Low current draw — designed for efficient operation from 12V caravan battery systems 2-screw mount — straightforward installation on awning rail or caravan body panels 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 23260BLK Lamp Type Awning Light LED Quantity 18 Colour Temperature 3000K Warm White Illuminance 80 lux @ 1m Beam Spread 60° Length 260mm Housing Colour Black Voltage 12V Mounting 2-screw surface mount Warranty 3 years Compatible With / Goes Well With Caravan awning rails and outdoor living areas 12V caravan battery systems LED Autolamps 23443BLK 443mm awning light (larger format, same series — confirm SKU with F.A.E.) LED Autolamps interior and exterior lighting accessories Frequently Asked Questions What colour temperature is the 23260BLK? It produces 3000K warm white — a soft, warm tone suited to outdoor entertaining and relaxed evening use beneath a caravan awning, as opposed to cooler daylight temperatures better suited to task lighting. How bright is the 23260BLK? It delivers 80 lux at 1 metre — a practical output level for awning and outdoor area illumination. For a larger awning span, the 443mm 36 LED variant in the same series produces 165 lux at 1m. What is the beam spread on the 23260BLK? The 60° beam spread focuses light in a downward arc beneath the awning, providing effective illumination without excessive upward glare. How is the 23260BLK mounted? It uses a 2-screw surface mount — straightforward installation on awning rails or caravan exterior panels. What warranty does the 23260BLK carry? The 23260BLK is backed by a 3-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Beacon / Strobe Amber 12 or 24V Permanent Mount Legendary Products & Support From Authorized Dealers When you choose Narva, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Narva dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Narva's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Narva dealer today!

Read more less

OE Style Toyota Switch - BlankFeatures: SPDT 'Dash light' & 'On' illumination Amperage rating 3A at 12V Push fit design with supplied fly lead connector for easy installation Laser etched L.E.D symbols with blue illumination No additional cutting into the dash required Specifications: Power Rating (Amp): 3A Switch Action: Off - On Voltage: 12 Lamp Colour/s: Blue Switch Type: Push Item Type: Light Switch Suitable For: 150 Series Prado 2010-current 200 Series Landcruiser 2008-current Rav4 2006-2011 GUN Series Hilux 09/2015-current Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

ADR Approved 12/24V Rear Indicator Lamp with Rubber Housing and Grommet IP67, CTA050889 Product Overview The LED Autolamps 164AM is a 12/24V rear indicator lamp with a rubber housing and black base, supplied with a grommet and plug for a complete, sealed recessed installation. The rubber housing absorbs vibration and impact more effectively than rigid plastic, making it a practical choice for trailers and commercial vehicles operating in demanding transport environments. ADR approved under CTA050889 and rated IP67, compatible with both 12V and 24V electrical systems. Features & Benefits Rubber housing — absorbs impact and vibration for greater durability than rigid plastic housings in demanding transport environments Black housing — clean, professional finish suits a wide range of trailer and vehicle body aesthetics Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the blister pack Low-profile recessed fitting — sits flush with the mounting panel for a clean, integrated finish ADR approved — certified under CTA050889 for legal on-road use as a rear indicator lamp in Australia IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Technical Specs Specification Detail SKU 164AM Lamp Type Rear Indicator Housing Material Rubber Housing Colour Black Voltage Range 12V / 24V Included Accessories Grommet, plug Mounting Low-profile recessed Protection Rating IP67 Compliance ADR — CTA050889 Packaging Blister pack Weight 1.00 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed rear indicator lamps with rubber housing 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved indicator lighting LED Autolamps 164RM stop/tail lamp with grommet (same 164 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 164AM approved for road use in Australia? Yes. The 164AM is ADR approved under CTA050889, meeting Australian Design Rules requirements for legal on-road use as a rear indicator lamp. What are the benefits of a rubber housing over plastic? Rubber absorbs impact and vibration more effectively than rigid plastic, making the 164AM more resistant to damage from knocks and road vibration — a practical advantage for trailers and commercial vehicles in demanding transport applications. What accessories are included with the 164AM? The blister pack includes a grommet and plug for a complete, sealed recessed installation straight out of the pack. What is the IP rating on the 164AM? The 164AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 164AM carry? Warranty information was not confirmed in available supplier data — contact F.A.E. or LED Autolamps to confirm before purchasing. Weight 1.00 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail/Indicator Lamp with Reflex Reflector Twin Pack, IP67 Product Overview The LED Autolamps 151BAR2 is a 12V stop, tail, and indicator lamp with built-in reflex reflector, supplied as a 2-pack for a complete left and right rear installation. Measuring 150mm x 80mm x 22mm in a low-profile black housing, it delivers three rear lighting functions plus passive reflector compliance in a single surface-mount unit a cost-effective trailer lamp solution carrying full ECE and ADR CTA060147 approval. Drawing 0.13A on stop, 0.04A on tail, and 0.12A on indicator at 13.8V. Rated IP67, backed by a 5-year warranty. Features & Benefits 2-pack — both lamps supplied for a complete left and right rear installation in a single purchase Stop, tail, and indicator in one lamp — three functions plus built-in reflex reflector in a single compact unit Built-in reflex reflector — integrated passive reflective element for additional rear visibility and compliance Low-profile 22mm depth — slim form factor sits close to the panel surface for a clean finish on trailer bodies ECE road approved — certified for stop/tail (ECE 02R1-S1), indicator (ECE 01 2A), and reflector (ECE 02 1A) ADR CTA060147 — Australian manufacturer approval for road-legal use IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems Low current draw — 0.13A stop / 0.04A tail / 0.12A indicator at 13.8V Technical Specs Specification Detail SKU 151BAR2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reflector Voltage 12V Dimensions 150mm x 80mm x 22mm Stop Current Draw 0.13A @ 13.8V Tail Current Draw 0.04A @ 13.8V Indicator Current Draw 0.12A @ 13.8V Housing Colour Black Mounting Surface mount Protection Rating IP67 Stop/Tail Compliance ECE 02R1-S1 Indicator Compliance ECE 01 2A Reflector Compliance ECE 02 1A Manufacturer Approval ADR — CTA060147 Packaging Blister pack Weight 0.36 kg Compatible With / Goes Well With Trailers and light commercial vehicles requiring a cost-effective 12V rear combination lamp Trailer builds requiring ECE and ADR-approved stop/tail/indicator lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 151BAR2 approved for road use in Australia? Yes. The 151BAR2 holds ECE certifications for stop/tail (ECE 02R1-S1), indicator (ECE 01 2A), and reflector (ECE 02 1A), plus ADR manufacturer approval CTA060147 — meeting requirements for legal on-road use in Australia. What is included in the 151BAR2 2-pack? The pack contains two lamps, providing a complete left and right rear installation in a single purchase. What is the built-in reflex reflector? The reflex reflector is a passive element integrated into the lamp housing, adding a compliant reflective surface for additional rear visibility without requiring a separate reflector unit. What is the IP rating on the 151BAR2? The 151BAR2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Is the 151BAR2 compatible with 24V systems? No. The 151BAR2 is a 12V-only lamp and is not rated for 24V applications. Weight 0.36 kg per lamp  Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail/Indicator Lamp with Built-In Reflector IP67, 5-Year Warranty Product Overview The LED Autolamps 151BAR is a 12V stop, tail, and indicator lamp with built-in reflector, supplied as a single lamp in the same 150mm x 80mm x 22mm low-profile form factor as the 151BAR2. It delivers three rear lighting functions plus passive reflector compliance in a single surface-mount unit an ECE-approved, cost-effective trailer lamp backed by a 5-year warranty. Rated IP67 and designed for 12V trailer and vehicle electrical systems. Features & Benefits Stop, tail, and indicator in one lamp — three functions plus built-in reflex reflector in a single compact unit Built-in reflector — integrated passive reflective element for additional rear visibility and compliance Low-profile 22mm depth — slim form factor sits close to the panel surface for a clean finish on trailer bodies ECE road approved — meets international road approval standards for legal on-road use across stop, tail, and indicator functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 151BAR Lamp Type Stop / Tail / Indicator / Reflector Voltage 12V Dimensions 150mm x 80mm x 22mm Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Weight 0.2 kg Compatible With / Goes Well With Trailers and light commercial vehicles requiring a 12V rear combination lamp Trailer builds requiring ECE-approved stop/tail/indicator lighting LED Autolamps 151BAR2 (same lamp supplied as a 2-pack) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 151BAR approved for road use in Australia? Yes. The 151BAR is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia across stop, tail, and indicator functions. What is the difference between the 151BAR and the 151BAR2? The 151BAR is a single lamp, while the 151BAR2 is the same lamp supplied as a 2-pack for a complete left and right installation. The 151BAR also carries a 5-year warranty; confirm whether the 151BAR2 carries the same warranty with LED Autolamps. What is the built-in reflector? The reflector is a passive element integrated into the lamp housing, adding a compliant reflective surface for additional rear visibility without requiring a separate reflector unit. What is the IP rating on the 151BAR? The 151BAR is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Is the 151BAR compatible with 24V systems? No. The 151BAR is a 12V-only lamp and is not rated for 24V applications. Weight 0.2 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less