ADR Approved 12V Stop/Tail/Indicator Lamp with Diamond Lens and White Background IP67 Product Overview The LED Autolamps 150BAR is the single-lamp variant of the 150BAR2, sharing the same 150mm x 80mm x 24mm low-profile form factor with diamond pattern lens but with a white background finish rather than the standard black housing. The white background gives this variant a distinct appearance, making it a natural choice for caravans, white-panelled trailers, and builds where a lighter finish is preferred. ADR road approved and rated IP67, designed for 12V electrical systems. Features & Benefits White background — distinctive finish suited to caravans, white-panelled trailers, and builds where a lighter lamp appearance is preferred Diamond pattern lens — premium lens design that enhances the lamp's appearance and distributes light output across the face Stop, tail, and indicator in one lamp — three rear lighting functions including built-in reflex reflector in a single low-profile unit Low-profile 24mm depth — slim form factor for a clean surface-mount finish on trailer and caravan bodies ADR road approved — meets Australian Design Rules for legal on-road use across stop, tail, and indicator functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 150BAR Lamp Type Stop / Tail / Indicator / Reflector Voltage 12V Dimensions 150mm x 80mm x 24mm Lens Diamond pattern Background White Mounting Surface mount Protection Rating IP67 Compliance ADR Weight 0.5 kg Compatible With / Goes Well With Caravans and white-panelled trailers requiring a 12V rear combination lamp with a lighter finish Trailer builds requiring ADR-approved stop/tail/indicator lighting LED Autolamps 150BAR2 (same lamp in black, supplied as a 2-pack) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 150BAR approved for road use in Australia? Yes. The LED Autolamps 150BAR is ADR road approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, and indicator functions. What makes the 150BAR different from the 150BAR2? The 150BAR has a white background housing and is supplied as a single lamp, while the 150BAR2 has a black housing and is supplied as a 2-pack. Both share the same 150mm x 80mm x 24mm diamond lens form factor and ADR approval. What is the diamond pattern lens? The diamond pattern lens is a distinctive textured design that gives the lamp a premium appearance and helps distribute light output across the lens face. What is the IP rating on the 150BAR? The 150BAR is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. Is the 150BAR compatible with 24V systems? No. The 150BAR is a 12V-only lamp and is not rated for 24V applications. Weight 0.5 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Premium 3-in-1 Stop/Tail/Indicator Lamp with Inbuilt Reflex Reflector ADR Approved, Diamond Lens, Lifetime Warranty. Product Overview The LED Autolamps 150ARM is a premium 3-in-1 stop, tail, and indicator LED lamp with inbuilt reflex reflector a purpose-built combination for trucks, trailers, and caravans requiring ADR-compliant rear lighting in a compact, low-profile surface-mount assembly. At just 150mm long and 24mm deep, it integrates four compliance functions (stop, tail, indicator, and reflector) into a single pre-wired unit, significantly reducing the number of individual lamp fittings required on a new trailer build or refurbishment. The diamond pattern lens delivers a distinctive premium aesthetic alongside its optical function, diffusing light uniformly across the lens face for consistent visibility at a distance. Three specific ADR compliance codes are confirmed CRN37381 (stop/tail), CRN37380 (indicator), and CRN38102 (reflector) making this one of the most thoroughly documented products in the LED Autolamps trailer lamp range. Backed by a lifetime warranty, the 150ARM is a genuine fit-once, forget-it solution for premium trailer and caravan builds. Key Specifications Light functions: Stop / Tail / Indicator + Inbuilt Reflex Reflector (4-in-1 compliance) Voltage: 12V – 24V (dual voltage) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR approved Stop/Tail compliance code: CRN37381 Indicator compliance code: CRN37380 Reflector compliance code: CRN38102 Mount type: Surface mount Mount centre to centre: 100mm Connector: Pre-wired Lens style: Diamond pattern Housing colour: Black Dimensions: 150mm (L) × 80mm (W) × 24mm (D) Current draw: Stop 0.13A / Tail 0.04A / Indicator 0.12A @ 12V Weight: 0.2 kg Packaging: Blister pack, 1 piece Warranty: Lifetime Features & Benefits Lifetime Warranty — The 150ARM carries a lifetime manufacturer's warranty — the strongest warranty commitment in the LED Autolamps trailer lamp range and a genuine statement of confidence in long-term product quality. Fit it once and it's covered for the life of the vehicle. Inbuilt Reflex Reflector (CRN38102) — The integrated reflex reflector meets ADR rear reflector requirements without a separate unit — reducing the total component count on the trailer and delivering a cleaner, more professional installation. Three ADR Compliance Codes On-Page — Stop/tail (CRN37381), indicator (CRN37380), and reflector (CRN38102) are all confirmed and documented. The most thoroughly certified combination lamp in this product range — essential for fleet compliance records and roadworthiness inspections. Diamond Pattern Lens — A premium optical design that diffuses light uniformly across the lens surface, improving visibility at oblique viewing angles and delivering a distinctive, high-quality appearance that sets premium trailer builds apart. Low Profile 24mm Depth — Sits flush to the trailer body at just 24mm deep — minimising exposure to impact at loading docks, improving aerodynamics on highway-speed caravan and trailer applications, and reducing the risk of snagging in tight clearance environments. Pre-Wired Connector — Supplied ready to connect for fast, straightforward installation on new builds and replacements without custom in-field termination work. 100mm Centre-to-Centre Mounting — A confirmed mounting pitch for consistent, repeatable fitment across multiple trailer positions or fleet vehicle standardisation. Low-Draw LED Efficiency — Stop draws 0.13A, indicator 0.12A, and tail just 0.04A at 12V — the low tail draw is particularly valuable on multi-lamp installations where cumulative standby current across a full trailer can be a meaningful factor for dual battery and solar-powered touring setups. 12V / 24V Dual Voltage — Works natively across both light vehicle and heavy transport electrical systems without modification. Technical Specs Specification Detail Brand LED Autolamps Part Number 150ARM Light Functions Stop / Tail / Indicator + Reflex Reflector Light Type LED Lens Style Diamond Pattern Voltage 12V – 24V (Dual Voltage) IP Rating IP67 Compliance ADR Approved Stop/Tail Compliance CRN37381 Indicator Compliance CRN37380 Reflector Compliance CRN38102 Mount Type Surface Mount Mount Centre to Centre 100mm Connector Pre-Wired Housing Colour Black Length 150mm Width 80mm Depth 24mm Current Draw — Stop 0.13A @ 12V Current Draw — Tail 0.04A @ 12V Current Draw — Indicator 0.12A @ 12V Weight 0.2 kg Packaging Blister Pack — 1 Piece Inner Carton Qty 20 Outer Carton Qty 40 Warranty Lifetime Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) B-doubles and road trains Caravans and camper trailers Box trailers and flatbed trailers Horse floats and stock trailers Buses and coaches Premium custom trailer builds requiring ADR-certified combination rear lighting Pairs well with: LED Autolamps reverse lamps — the 150ARM does not include reverse function; a separate reverse lamp is required for full rear lighting compliance LED Autolamps side marker and clearance lights for a matched full-trailer LED upgrade LED Autolamps number plate lights and wiring harness accessories Weight 0.2 kg per unit. Frequently Asked Questions Does the 150ARM include a reverse light function? No. The 150ARM provides stop, tail, and indicator functions plus an inbuilt reflex reflector. A separate reverse lamp must be fitted if reverse lighting is required. Refer to the LED Autolamps range for a compatible reverse lamp. What does the lifetime warranty cover on the 150ARM? The 150ARM is backed by a lifetime manufacturer's warranty. For specific terms including what the warranty covers and how to make a claim, contact LED Autolamps or your authorised reseller directly. What are the ADR compliance codes and why do they matter? The 150ARM carries three confirmed ADR compliance codes: CRN37381 (stop/tail), CRN37380 (indicator), and CRN38102 (reflex reflector). These codes confirm each function has been independently tested and certified to Australian Design Rules — important for fleet compliance documentation, roadworthiness inspections, and transport authority requirements. What does the diamond pattern lens do? The diamond pattern lens diffuses light evenly across the lens face, improving rear visibility at oblique angles and delivering a premium aesthetic distinguishing the 150ARM from standard flat-lens marker lamps. What is the current draw of the 150ARM across each function? At 12V, the stop function draws 0.13A, the indicator 0.12A, and the tail just 0.04A. This low current draw is particularly well-suited to multi-lamp trailer installations and dual battery touring setups where cumulative electrical load is a consideration. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Stop/Tail/Indicator/Reflector Lamp Horizontal/Vertical Mount, 4-Pin Harness Compatible Product Overview The LED Autolamps 149BARM4P is a rear combination lamp covering stop, tail, indicator, and reflector functions in a single 150mm x 80mm x 29mm unit. Mounting flexibility is a standout feature it can be installed in either horizontal or vertical orientation to suit a wide range of trailer and truck body panel layouts. The 4P suffix indicates compatibility with LED Autolamps' 4-pin plug harness system on select cable configurations refer to the LED Autolamps cable systems range or contact F.A.E. to confirm harness compatibility for your application. ECE approved and rated IP67. Features & Benefits Horizontal and vertical mount options — flexible orientation suits a wide range of trailer and truck body panel layouts without additional hardware Stop, tail, indicator, and reflector in one lamp — four functions in a single compact unit, reducing wiring complexity 4-pin plug harness compatible — on select cable system configurations, the 149BARM4P plugs directly into LED Autolamps' 4-pin harness system; confirm compatible part numbers with F.A.E. ECE approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V — compatible with 12V and 24V vehicle electrical systems Technical Specs Specification Detail SKU 149BARM4P Lamp Type Stop / Tail / Indicator / Reflector Voltage Range 12V / 24V Dimensions 150mm x 80mm x 29mm Mounting Horizontal or vertical surface mount Connector 4-pin plug (harness compatible on select variants) Protection Rating IP67 Compliance ECE Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring flexible-mount rear combination lamps LED Autolamps 4-pin cable harness systems (confirm compatible part numbers with F.A.E.) 12V and 24V vehicle electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 149BARM4P approved for road use in Australia? Yes. The 149BARM4P is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia. What mounting orientations are available for the 149BARM4P? The 149BARM4P can be mounted in either horizontal or vertical orientation, giving installation flexibility to suit different trailer and truck body panel layouts. What does the 4-pin harness compatibility mean? On certain cable system configurations, the 149BARM4P is compatible with LED Autolamps' 4-pin plug harness system, allowing plug-and-play installation without cutting or splicing wires. Contact F.A.E. to confirm which cable system part numbers are compatible with your setup. What is the IP rating on the 149BARM4P? The 149BARM4P is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 149BARM4P carry? Warranty information was not confirmed in available supplier data — contact F.A.E. or LED Autolamps to confirm before purchasing. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Great Whites 24 LED Twin Bar Driving Light Great Whites logo can be wired to be on at all times, when park lights are on or when lights are on. Great option for those needing more light but limited space and weight options. Can be easily mounted to a roof rack with standard fittings. With a whiter, brighter output, Great Whites were designed to see more while withstanding any environment or driving situation. Sturdy bracket system and superior materials means a Great Whites light bar is designed to last.Great Whites GWT5243 Features: Cree LED's that produce higher lumens per watt to increase light intensity Cutting edge iris-reflector technology Marine grade aluminium body with a poly-carbonate lens Heavy duty brackets to keep your lights in place and not vibrate Great Whites GWT5243 Specifications: LEDS: Cree XP-G2 Raw Lumens: 13,440 Effective Lumens: 9,363 Voltage: 10-32V Current Draw: 10.72A@12V Watts: 129W Colour temperature: 6000K Environment: IP68/69K (Dust proof/submersible to 3m) Vibration: 21 Grms Connection: Deutsch Weight: 4kg Dimensions (HxLxD): 985 x 65 x 62mm Legendary Products & Support From Authorized Dealers When you choose Great Whites, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Great Whites dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Great Whites's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Great Whites dealer today!

Read more less

ADR Approved Stop/Tail/Indicator/Reverse Lamp Twin Pack with Inbuilt Reflex Reflector IP67 Product Overview The LED Autolamps 223BARM2 is a 12/24V rear combination lamp twin pack covering stop, tail, indicator, reverse, and integrated reflex reflector functions supplied as a pair for a complete left and right rear installation. The easy mounting design and inbuilt reflex reflector make it a practical, compliant all-in-one rear lighting solution for trailers, trucks, and commercial vehicles. ADR Australian road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Twin pack — both lamps supplied for a complete left and right rear installation in a single purchase Stop, tail, indicator, reverse, and reflector in one lamp — five functions in a single unit, reducing wiring complexity and fitting count Inbuilt reflex reflector — integrated passive reflective element for additional rear visibility and compliance Easy mounting design — designed for straightforward installation on trailer and truck body rear panels ADR Australian road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 223BARM2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse / Reflector Voltage Range 12V / 24V Reflector Inbuilt reflex Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a full-function rear combination lamp 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved rear combination lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 223BARM2 approved for road use in Australia? Yes. The 223BARM2 is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use across all five functions. What does the inbuilt reflex reflector provide? The integrated reflex reflector is a passive element that reflects light from other vehicles back towards the source, adding rear visibility and passive compliance without requiring a separate reflector unit. What functions does the 223BARM2 cover? It combines stop, tail, indicator, reverse, and reflector functions in a single lamp — a complete rear lighting solution for trailers and trucks in one unit per side. What is the IP rating on the 223BARM2? The 223BARM2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 223BARM2 carry? The 223BARM2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Boat Trailer Lamp Twin Pack Diffused Tail, Licence Plate, IP67, 40cm Cable Product Overview The LED Autolamps 216ARLP2 is a 12V rear combination lamp twin pack designed specifically for boat trailer applications. Covering stop, tail, indicator, and integrated licence plate functions, each lamp features a diffused tail output for a smooth, even tail light appearance a premium touch for trailer lighting. The 40cm cable on each lamp provides a practical wiring reach for standard trailer connection points. ADR approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Designed for boat trailers — purpose-built for the submersion, corrosion, and UV exposure demands of marine-adjacent trailer applications Diffused tail function — smooth, even tail light output for a clean, premium appearance on the road Integrated licence plate lamp — built-in number plate illumination eliminates the need for a separate lamp fitting Twin pack with 40cm cables — both lamps supplied with pre-wired leads for a complete left and right installation ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 216ARLP2 Pack Contents 2 lamps + 40cm cables Lamp Type Stop / Tail / Indicator / Licence Plate Tail Function Diffused Voltage 12V Cable Length 400mm Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.84 kg Compatible With / Goes Well With Boat trailers requiring ADR-approved rear combination lighting with licence plate 12V trailer electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 216ARLP2 approved for road use in Australia? Yes. The 216ARLP2 is ADR approved, meeting Australian Design Rules requirements for legal on-road use across stop, tail, indicator, and licence plate functions. What does the diffused tail function mean? Rather than individual LED points being visible through the lens, the diffused tail produces a smooth, even spread of light across the tail lamp face — giving a cleaner, more premium appearance compared to standard point-source LED tail lamps. Does the 216ARLP2 include a licence plate lamp? Yes. Each lamp in the twin pack has an integrated licence plate lamp, eliminating the need for a separate number plate light fitting on the trailer. Is the 216ARLP2 suitable for submersible boat trailer use? The 216ARLP2 is IP67 rated, covering water immersion up to 1 metre for 30 minutes. For trailers regularly submerged during boat launching, consider fully submersible IP68-rated lamps such as the 209 or 210 series — confirm suitability with F.A.E. What warranty does the 216ARLP2 carry? The 216ARLP2 is backed by a 5-year warranty from LED Autolamps. Weight 0.84 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Bullbar Surface Mount Lamp Twin Pack IP67, 5-Year Warranty Product Overview The LED Autolamps 135AW2 is a 12V lamp twin blister pack designed specifically for bullbar applications on 4WD and light commercial vehicles. ECE Australian road approved and rated IP67, it supplies a matched pair for a complete left and right installation ready to surface mount on existing bullbar lamp positions. Backed by a 5-year warranty. Features & Benefits Designed for bullbars — purpose-built for bullbar lamp positions on 4WD and light commercial vehicles Twin blister pack — both lamps supplied for a complete left and right installation in a single purchase ECE Australian road approved — meets international and Australian road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion, built for outdoor and off-road environments Surface mount — straightforward installation on bullbar lamp mounting points 12V only — designed for 12V vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135AW2 Pack Contents 2 lamps Voltage 12V Mounting Surface mount Protection Rating IP67 Compliance ECE (Australian road approved) Packaging Blister pack Warranty 5 years Compatible With / Goes Well With 4WD and light commercial vehicles with bullbar lamp positions LED Autolamps 135CAT1 front direction indicator/position lamp (same 135 series) LED Autolamps 175A/2 front indicator bullbar twin pack (alternative bullbar indicator option) LED Autolamps wiring harnesses and lighting accessories Frequently Asked Questions Is the 135AW2 approved for road use in Australia? Yes. The 135AW2 is ECE Australian road approved, meeting international and Australian road approval standards for legal on-road use. What vehicle applications is the 135AW2 designed for? The 135AW2 is designed for bullbar lamp positions on 4WD and light commercial vehicles — confirm the specific function (indicator, position, or combination) and fitment compatibility with F.A.E. before ordering. What does the twin blister pack include? The pack contains two lamps for a complete left and right bullbar lamp installation in a single purchase. What is the IP rating on the 135AW2? The 135AW2 is rated IP67, meaning it is fully sealed against dust and water immersion — suitable for outdoor and off-road use on bullbar-equipped vehicles. What warranty does the 135AW2 carry? The 135AW2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Compact Combination Lamp with Integrated Licence Plate Light Stop, Tail, Indicator, Reflector. Twin Pack. Product Overview The LED Autolamps 149BARLP2 is a twin blister pack containing a matched pair of compact rear combination lamps one standard unit (149BAR) and one with an integrated horizontally-mounted licence plate lamp (149BARLP). Together they form a complete left-and-right rear lighting solution for small trailers, boat trailers, camper trailers, and light commercial applications, delivering stop, tail, indicator, reflex reflector, and licence plate illumination in a single compact footprint. Measuring just 150mm x 80mm x 29mm, the 149 series is one of the most widely used compact combination lamp formats in Australia a proven performer across the trailer and caravan industry. The lamp body mounts vertically with the indicator function at the top, secured via rear bolts through a 10mm hole in the fixing surface. With 8 LEDs in the main lamp and 4 LEDs in the integrated licence plate section, IP67 waterproofing, ECE compliance, and ultra-low current draw across all functions, the 149BARLP2 is a compact, reliable, and legally compliant rear lighting solution for 12V vehicles and trailers. Backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator, reflex reflector, licence plate lamp LED count: 8 in main lamp + 4 in licence plate lamp Licence plate lamp mount: Horizontal Dimensions: 150mm x 80mm x 29mm Mounting stud distance: 100mm Mount type: Vertical surface mount rear bolts through 10mm hole indicator at top Cable length: 40cm Wiring: Brown = tail/licence / Red = stop / Yellow = indicator / White = earth IP rating: IP67 Input voltage: 12V only Current draw: Stop 0.07A / Tail + Number Plate 0.05A / Indicator 0.08A @ 13.8V Compliance: ECE approved Warranty: 5 years Pack quantity: 2 lamps (1x 149BAR + 1x 149BARLP) twin blister pack Brand: LED Autolamps SKU: 149BARLP2 Features & Benefits Five functions in one compact unit: Stop, tail, indicator, reflex reflector, and integrated licence plate lamp eliminate the need for separate lamp assemblies in tight rear panel spaces Horizontally mounted licence plate lamp: The integrated licence plate light on the 149BARLP unit mounts horizontally for correct ADR/ECE licence plate illumination positioning Ultra-low current draw: Stop 0.07A / Tail+Plate 0.05A / Indicator 0.08A extremely low electrical load across all functions, ideal for small trailer electrical systems Compact 150mm x 80mm x 29mm footprint: One of the most space-efficient combination lamp formats available, suitable for small trailers, boat trailers, and tight rear panel applications 8 LED + 4 LED construction: 8 LEDs in the main lamp body and 4 LEDs in the integrated licence plate section provide bright, effective output in a minimal package IP67 waterproof: Completely sealed against dust and temporary water immersion particularly suited to boat trailer applications where the lamp may be submerged during launch Twin pack left and right: One 149BAR (non-licence) and one 149BARLP (with licence) provided per pack for a complete matched rear pair Colour-coded wiring: Brown (tail/licence), Red (stop), Yellow (indicator), White (earth) for fast, error-free installation ECE approved: Compliant with ECE standards for road use on trailers and vehicles 5-year warranty: Backed by LED Autolamps' 5-year product warranty Technical Specs Specification Detail SKU 149BARLP2 Brand LED Autolamps Series 149 Series Functions Stop, Tail, Indicator, Reflex Reflector, Licence Plate LED Count 8 (main lamp) + 4 (licence plate) Licence Plate Lamp Horizontal mount Dimensions 150mm x 80mm x 29mm Mounting Stud Distance 100mm Mount Type Vertical surface mount rear bolts, 10mm hole Cable Length 40cm Wiring Colour Code Brown = Tail/Licence, Red = Stop, Yellow = Indicator, White = Earth IP Rating IP67 Input Voltage 12V only Current Draw Stop 0.07A @ 13.8V Current Draw Tail + Number Plate 0.05A @ 13.8V Current Draw Indicator 0.08A @ 13.8V Compliance ECE approved Warranty 5 Years Pack Quantity 2 lamps (1x 149BAR + 1x 149BARLP) twin blister Compatible With Universal suits all 12V trailers requiring compact ADR/ECE-compliant rear combination lighting including: Small box trailers and car trailers Boat trailers (IP67 submersion suitable for boat ramp use) Camper trailers and small caravans Light commercial trailers Pairs well with: LED Autolamps 42WM white front position marker LED Autolamps 35CARM red/amber side marker LED Autolamps 7030R red self-adhesive reflectors Compatible LED Autolamps cable kits and plug-in harnesses (sold separately) Frequently Asked Questions What is included in the 149BARLP2 twin blister pack? The pack contains two lamps one 149BAR (stop/tail/indicator/reflector without licence plate lamp) and one 149BARLP (stop/tail/indicator/reflector with integrated horizontal licence plate lamp). Together they form a matched left-and-right rear lighting solution. Is this lamp suitable for boat trailer use? Yes the IP67 rating means the lamp is fully protected against dust and temporary water immersion, making the 149BARLP2 well-suited to boat trailer applications where the lamp may be submerged during boat launching. How is this lamp mounted? Mount vertically onto a flat surface with the indicator function at the top. Secure using rear bolts through a 10mm hole in the fixing surface. The mounting stud distance is 100mm. Refer to ADR 13/00 for mounting requirements. Is this lamp compatible with 24V vehicles? No the 149BARLP2 is 12V only. Confirm your trailer or vehicle operates on a 12V system before purchasing. What is the current draw across all functions? Current draw is extremely low Stop: 0.07A, Tail + Number Plate: 0.05A, Indicator: 0.08A all at 13.8V. This makes the 149 series one of the most power-efficient combination lamp options available for small 12V trailer applications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Front Marker Lamp with Clip-In Lens Clear, IP67, 5-Year Warranty Product Overview The LED Autolamps 1458WM is a 12/24V front marker lamp with a clear lens, designed for surface mounting on trailers, trucks, and commercial vehicles. Measuring 74mm x 38mm, the clip-in lens design allows for lens replacement without removing the full unit a practical advantage for reducing maintenance time and cost in the field. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Clip-in lens design — lens can be replaced independently without removing the full lamp housing, reducing maintenance costs and downtime Clear lens — clean appearance when inactive; the marker light colour is produced by the LEDs when the lamp is energised ADR road approved — meets Australian Design Rules for legal on-road use as a front marker lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 1458WM Lamp Type Front Marker Lens Colour Clear Voltage Range 12V / 24V Length 74mm Width 38mm Lens Clip-in replaceable Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring front marker lamps 12V light vehicles and 24V heavy transport applications Trailer and truck body builds requiring ADR-approved front marker lighting LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 1458WM approved for road use in Australia? Yes. The LED Autolamps 1458WM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a front marker lamp. What does the clip-in lens design mean for maintenance? The lens clips out independently, allowing it to be replaced without removing the full lamp unit from the mounting surface — saving time and cost during field maintenance. What colour does the 1458WM emit? The lens is clear when inactive. The marker light output colour is produced by the LEDs when the lamp is energised — confirm the LED colour with F.A.E. or LED Autolamps as this is not specified in available supplier data. What is the IP rating on the 1458WM? The 1458WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 1458WM carry? The 1458WM is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Red LED Side Marker Lamp with Clip-In Clear Lens IP67, 5-Year Warranty Product Overview The LED Autolamps 1458RM is a 12/24V red LED side marker lamp sharing the same 74mm x 38mm clip-in lens form factor as the 1458WM front marker lamp. The clear lens allows the red LED output to show cleanly when the lamp is active, while appearing clear and unobtrusive when inactive. The clip-in lens design allows for lens replacement without removing the full lamp unit. ADR road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Red LED output — delivers correct red side marker output for rear lateral visibility on trailers and commercial vehicles Clip-in lens design — lens can be replaced independently without removing the full lamp housing, reducing maintenance costs and downtime Clear lens — clean appearance when inactive; red LED output activates when the lamp is energised ADR road approved — meets Australian Design Rules for legal on-road use as a side marker lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 1458RM Lamp Type Side Marker LED Colour Red Lens Colour Clear Voltage Range 12V / 24V Length 74mm Width 38mm Lens Clip-in replaceable Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Weight 0.3 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring red side marker lamps 12V light vehicles and 24V heavy transport applications Trailer and truck body builds requiring ADR-approved side marker lighting LED Autolamps 1458WM front marker lamp (same 74x38mm clip-in form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 1458RM approved for road use in Australia? Yes. The LED Autolamps 1458RM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a side marker lamp. What does the clip-in lens design mean for maintenance? The lens clips out independently, allowing it to be replaced without removing the full lamp unit from the mounting surface — saving time and reducing cost during field maintenance. Why does the 1458RM have a clear lens if it outputs red? The clear lens gives the lamp a clean, unobtrusive appearance when inactive. The red output is produced by the LEDs behind the clear lens when the lamp is energised — confirm exact LED and lens configuration with F.A.E. or LED Autolamps before ordering. What is the IP rating on the 1458RM? The 1458RM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 1458RM carry? The 1458RM is backed by a 5-year warranty from LED Autolamps. Weight 0.3 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

SAE Class 1 Amber Strobe Beacon 6 x 3W LEDs, 87 FPM, IP67, 12–32V Product Overview The LED Autolamps 144AMF is a heavy-duty amber LED strobe beacon designed for permanent mounting on trucks, plant equipment, and commercial vehicles. Powered by 6 x 3W LEDs through an amber polycarbonate lens, it delivers 87 flashes per minute at SAE J845 Class 1 compliance the highest SAE classification for vehicle warning lamps. Measuring 130mm round x 97mm high with a nylon base, the 144AMF draws 0.71A at 13.8V and comes with a 19cm sheathed cable lead for connection to the vehicle's electrical system. Rated IP67 across a 12–32V operating range, backed by a 3-year warranty. Features & Benefits SAE J845 Class 1 compliant — the highest SAE classification for vehicle warning lamps; amber only 6 x 3W high-brightness LEDs — 18W total LED output for strong, attention-grabbing amber strobe visibility 87 FPM flash rate — consistent, regulated flash rate meeting SAE Class 1 requirements Heavy-duty construction — nylon base with polycarbonate lens built for demanding outdoor and transport environments 19cm sheathed cable — pre-wired lead for straightforward connection to the vehicle electrical system IP67 rated — fully sealed against dust and water immersion Wide voltage range 12–32V — compatible with 12V and 24V vehicle and equipment electrical systems Permanent mount — engineered for stable, long-term installation on vehicle bodies and structures 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 144AMF Lamp Type Strobe Beacon LED Configuration 6 x 3W LED Colour Amber Lens Colour Amber Lens Material Polycarbonate Base Material Nylon Voltage Range 12V – 32V Current Draw 0.71A @ 13.8V Flash Rate 87 FPM Dimensions 130mm round x 97mm Cable 19cm sheathed Mounting Permanent Compliance SAE J845 Class 1 (Amber only) Protection Rating IP67 Warranty 3 years Compatible With / Goes Well With Trucks, plant equipment, and commercial vehicles requiring SAE Class 1 amber warning beacons 12V and 24V vehicle and equipment electrical systems Emergency, warning, and hazard lighting applications LED Autolamps 128AMF amber strobe beacon (same class, different form factor) LED Autolamps wiring harnesses and emergency lighting accessories Frequently Asked Questions What compliance standard does the 144AMF meet? The 144AMF is SAE J845 Class 1 compliant for amber output — the highest SAE classification for vehicle warning lamps, meeting the most stringent intensity and flash rate requirements. What is the flash rate of the 144AMF? The 144AMF operates at 87 flashes per minute — a fixed flash rate meeting SAE J845 Class 1 requirements for vehicle warning beacons. What voltage systems is the 144AMF compatible with? It operates across 12V to 32V, making it compatible with 12V light vehicles and 24V heavy transport and plant equipment electrical systems. What is the IP rating on the 144AMF? The 144AMF is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor, industrial, and transport applications. What warranty does the 144AMF carry? The 144AMF is backed by a 3-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 24V Front Indicator and Position Lamp Surface Mount, IP67, 5-Year Warranty Product Overview The LED Autolamps 135CAT124 is a 24V front indicator and position lamp in the same compact 135mm x 38mm x 24mm rectangular form factor as the 135RM and 135WM. Designed for surface mounting on trucks, trailers, and commercial vehicles requiring a 24V front indicator and position light combination, it delivers ADR-approved dual-function output in a single low-profile unit. Rated IP67 and backed by a 5-year warranty. Features & Benefits Front indicator and position light combined — two front lighting functions in a single surface-mount unit, simplifying installation Surface mount — straightforward installation on trailer and truck body front panels ADR road approved — meets Australian Design Rules for legal on-road use as a front indicator and position lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V compatible — designed primarily for 24V heavy transport applications 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 135CAT124 Lamp Type Front Indicator / Position Voltage Range 12V / 24V Dimensions 135mm x 38mm x 24mm Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring 24V front indicator and position lighting 12V and 24V vehicle electrical systems LED Autolamps 135RM stop/tail lamp (same 135 series form factor) LED Autolamps 135WM reverse lamp (same 135 series form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 135CAT124 approved for road use in Australia? Yes. The LED Autolamps 135CAT124 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a front indicator and position lamp. What functions does the 135CAT124 cover? It combines front indicator and position light functions in a single surface-mount unit, reducing the number of fittings required on truck and trailer front panels. How does the 135CAT124 fit with other 135 series lamps? The 135CAT124 shares the same 135mm x 38mm x 24mm form factor as the 135RM stop/tail and 135WM reverse lamps, making it a natural match for a consistent lamp style across the full vehicle. What is the IP rating on the 135CAT124? The 135CAT124 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor and transport applications. What warranty does the 135CAT124 carry? The 135CAT124 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less